MARIANA ENTERPRISE

CPRI Tested Electrical Panel Board

ISO 9001:2015 CERTIFIED

PROJECT REPORT
ON
LT PANEL BOARD

Submitted towards the fulfillment of requirements for the completion of Project

CLIENT:- Airport Authority of India

DEPARTMENT:- Dibrugarh Airport Authority
PROJECT:- ATC Project Dibrugarh Airport
ADDRESS:- Dibrugarh, Assam
 TABLE OF CONTENTS

Sl No. TITLE PG NO.

1 Panel Description 2
2 System Parameter 3
3 Bill of Material 4-6
4 General Arrangement Drawings 7-8
5 Terms & Conditions 9

Page No.-1
PANEL DESCRIPTION:-
1. SYSTEM SPECIFICATION : 415V, 50Hz, 3PHASE 4WIRE.
2. ENCLOSURES : INDOOR
3. PAINT SHADE : THE PANEL SHALL BE PAINTED WITH POWDER COATED PAINT AS PER FOLLOWING COLOR SCHEME.
DOORS/COVERS AND MAIN FRAME- SIEMENS GREY
MOUNTING PLATE- SIEMENS GREY
BASE FRAME- BLACK
4. GASKET : POLYURETHELENE GASKET SHALL BE PROVIDED TO MAKE THE PANEL DUST AND VERMIN PROOF.
5. BUS BAR : BUS BAR SHALL BE SUPPORTED ON NON HYGROSCOPIC, NON CARBONISING, CORROSION RESISTANCE
SMC/DMC INSULATORS.
6. EARTH BUSBAR : THE EARTH BUS SHALL BE PROVIDED THROUGHOUT LENGTH OF THE PANEL.
7. DEGREE OF PROTECTION : THE PANEL SHALL BE DUST & VERMIN PROOF, FLOOR COMPARTMENTALIZED (FORM-3b) AND SUITABLE FOR
DEGREE OF PROTECTION IP-42 FOR INDOOR.
8. DOOR EARHING : ALL HINGED DOOR SHALL BE EARTHED THROUGH COPPER FLEXIBLE WIRE.
9. CONTROL WIRING : CONTROL WIRING SHALL BE CARRIED OUT WITH 1100V COPPER FRLS FLEXIBLE WIRE AS PER FOLLOWING
COLOUR STANDARD.
AC VOLTAGE CIRCUIT - 2.5 SQMM. BLACK WITH PHASE INDICATION COLOUR AT ENDS.
CURRENT CIRCUIT - 2.5 SQMM. BLACK WITH PHASE INDICATION COLOUR AT ENDS.
10. POWER WIRING : AS PER FEEDER RATING COPPER FRLS FLEXIBLE F WIRE FOR POWER CIRCUIT.
11. METERING INSTRUMENT : ALL METER SHALL BE DIGITAL TYPE, FLUSH MOUNTED 96 X 96 Sqmm.
12. OUTGOING TERMINATION : ALL CABLE TERMINATION SHALL BE BOUGHT AT CABLE ALLEY.
14. HARDWARE : ALL HARDWARE SHALL BE PASSIVE TYPE.
15. DANGER BOARD : DANGER BOARD SHALL BE PROVIDED AS PER STANDARD AT FRONT AND REAR OF EACH BOARD IN HINDI AND
ENGLISH LANGUAGE.
16. DIMENSION : ALL DIMENSION ARE IN MM.

Page No.-2
1 SYSTEM PARAMETERS (FIRE PANEL):- 5 BUSBAR:-
a) AMBIENT TEMPERATURE : 35 degree Celcius i) MAIN BUSBAR
b) MAIN SYSTEM : 3-PHASE 4-WIRE AC, 50HZ±5%
c) RATED OPERATION VOLTAGE : 415V AC±5% a) TEMPERATURE RISE LIMIT : AS PER IEC 60439-1
d) DRY FREQUENCY WITHSTAND VOLTAGE : 2.5KV b) MATERIALS : ALUMINUM

2 CONSTRUCTION:- c) CROSS-SECTION AREA FOR EACH PANEL : REFER GA

a) TYPE OF BOARD : d) COLOR CODING : R,Y,B & N HEAT SHRINKABLE SLEEVE
b) MAIN FRAME : 2 MM CRCA SHEET : WITH RYB COLOR CODE
c) DOORS/COVERS : 2 MM CRCA SHEET ii) EARTH BUSBAR
d) PARTITIONS : 2 MM CRCA SHEET
e) GLAND PLATES : 2 MM CRCA SHEET a) RATED CURRENT : REFER GA
f) LOCATION : INDOOR b) LOCATION THROUGHOUT LENGTH OF THE PANEL
g) MOUNTING : FLOOR MOUNTED AT BOTTOM
h) LIFTING ARRANGEMENT : LIFTING EYES PROVIDED
6 POWER WIRE SIZES:-
j) DEGREE OF PROTECTION : IP-42 FOR INDOOR a) UPTO 8A : 2.5 SQMM. CU. FRLS
k) TYPE OF SEGREGATION : FORM 3b b) 9A TO 25A : 4 SQMM. CU. FRLS
c) 26A TO 32A : 6 SQMM. CU. FRLS
3 PAINTING:- d) 33A TO 50A : 10 SQMM. CU. FRLS
a) PROCEDURE : 9 TANK PHOSPHATING PROCESS e) 51A TO 63A : 16 SQMM. CU. FRLS
b) POWDER THICKNESS : MINIMUM 70 MICRON
c) SHADE FOR FRAME/DOORS/COVERS : PO RED
d) MOUNTING PLATES : PO RED
7 THE MINIMUM CLEARANCE OF MAIN BUSBAR AS FOLLOWS:-
4 NAME PLATE:- a) BETWEEN PHASE TO PHASE : 32MM
a) MATERIAL : PRINTED ALUMINUM (SCFREWED) b) BETWEEN PHASE TO NEUTRAL : 32MM
b) COLOUR OF LETTERING : RED&BLUE c) BETWEEN PHASE TO EARTH : 26MM
c) INDICATION OF EQUIPMENT : SELF ADHESIVE STICKER d) BETWEEN NEUTRAL TO EARTH : 26MM
MOUNTED INSIDE PANEL
d) FEEDER NAME PLATE : ON FRONT DOOR

Page No.-3
 BILL OF MATERIAL (APFC PANEL)
SL
NO ITEMS MAKE QTY UNIT
As Incomer
250A 4P 25KA 100% Icu , microprocessor, Earth Fault, MCCB with
1 O/L, S/C protection ABB 2 Nos.
2 Spreader Link For above MCCB ABB 2 Set.
3 LED Indicating Lamp (R,Y,B) Vaishno 3 Nos.
4 2A, SP, MCB ABB 3 Nos.
5 Ammeter L&T 2 Nos.
6 Ammeter Selector Switch L&T 2 Nos.
7 CT 600/5A AE 6 Nos.
8 250A, 4P, ATS L&T 1 No.
9 Controller for above L&T 1 No.
4 3 Phase Voltmeter L&T 1 No.
5 3 Phase Ammeter L&T 1 Nos.
14 CT 600/5A AE 3 Nos.
15 LED Indicating Lamp (R,Y,B) Vaishno 3 Nos.
16 2A, SP, MCB ABB 3 Nos.
As Outgoing
1 For 55Kw, Motor-2No.
200A 3P+N 25KA MCCB ABB 2 Nos.
Spreader Link For above MCCB ABB 2 Set
Soft Starter, 55KW L&T 2 Nos.
3 Phase Voltmeter L&T 2 Nos.
3 Phase Ammeter L&T 2 Nos.
CT 200/5A AE 6 Nos.
LED Indicating Lamp (R,Y,B) Vaishno 6 Nos.
2A, SP, MCB ABB 8 Nos.
Single phase preventor L&T 2 Nos.
PLA Relay, 220AC L&T(Salzer) 2 Nos.
Push Button Start Teknika 2 Nos.
Page No.-4
 Push Button Stop Teknika 2 Nos.
Push Button Re-Set Teknika 2 Nos.
Auto Manual Selector Switch L&T 2 Nos.
Local Remote Selector Switch L&T 2 Nos.
2 For 5.5Kw, Motor-2No.
40A 3P+N 10KA MCCB ABB 2 Nos.
Soft Starter, 5.5KW ABB 2 Nos.
3 Phase Voltmeter L&T 2 Nos.
3 Phase Ammeter L&T 2 Nos.
CT 60/5A L&T 2 Nos.
LED Indicating Lamp (R,Y,B) AE 2 Nos.
2A, SP, MCB Vaishno 2 Nos.
Single phase preventor ABB 2 Nos.
PLA Relay, 220AC L&T 2 Nos.
Push Button Start L&T(Salzer) 2 Nos.
Push Button Stop Teknika 2 Nos.
Push Button Re-Set Teknika 2 Nos.
Auto Manual Selector Switch Teknika 2 Nos.
Local Remote Selector Switch L&T 2 Nos.
Local Remote Selector Switch L&T 2 Nos.
3 For 24V Diesel Driven Pump-2No.
20A DP 10KA MCB ABB 2 Nos.
10A DP MCB ABB 2 Nos.
On/ Off Toggle Switch L&T 2 Nos.
Auxiliary Contactor, 220AC ABB 2 Nos.
Cut Out Relay Reputed 4 Nos
PLA Relay, DC L&T(Salzer) 10 Nos
Indicator Lamp, AC Vaishno 2 Nos.
Indicator Lamp, DC Vaishno 14 Nos
Push Button, Start Teknika 2 Nos
Push Button, Stop Teknika 2 Nos
Push Button, Accept Teknika 2 Nos
Push Button, Emergency Teknika 2 Nos
Buzzer Teknika 2 Nos
Page No.-5
Ammeter L&T 2 Nos
Voltmeter L&T 2 Nos
Battery Charger Reputed 2 Nos
ESR Minilec 2 Nos
Auto/Manual Selector Switch L&T 2 Nos

Page No.-6
 101 102
GENERAL ARRANGEMENT DRAWINGS
103 104 105 106 107 108 109

A A
This Drawing & any information or descriptive matter set out hereon the confidential property ofM/S

B
used for manufacturing tendering or for any other purpose without their written permission.
MARIANA ENTERPRISE & must not be disclosed. looned. copied or

MANUFACTURER NAME OF WORK:- ELECTRICAL FIRE PANEL BOARD DRG. NO. ME/II/CU-5170 APPROVED BY

M/S MARIANA ENTERPRISE PROJECT:- ATC PROJECT DIBRUGARH AIRPORT DRG. DATE 05.09.2023
AN ISO 9001:2015 CERTIFIED SHEET NO 1 OF 2
EPIP, COMPLEX, AMINGAON GHY-31
DRAWN BY B. GOGOI
9435145349(M), [email protected]
CLIENT:- Airport Authority of India, Dibrugarh CHECK BY R. DAS
1. CPRI APPROVED CONTROL PANEL
MANUFACTURER. OWNER:- SCALE(IN MM) 1:200
2. ELECTRICAL CONTRACTOR
3. SSI UNIT UNDER GOVT. OF ASSAM TITLE:- ALL DIMENTION ARE IN MM

Page No.-7