®

The All-Round Flashlight Expert EA41 User Manual

Features Operation Instructions
· Novel 'Unique Integrated Technology' offers a more sturdy and Battery installation
lightweight body. 1. Insert batteries with the positive (+) and negative (-) ends
· Utilizes a CREE XM-L2 U2 LED corresponding to the diagram on the inside of the battery
· Maximum output of up to 1020 lumens compartment.
· Integrated “Precision Digital Optics Technology” provides extreme 2. Tighten the tail cap by aligning the two gold pins on the inside of the
reflector performance tail cap with the corresponding holes on the flashlight body and rotate
· Boasts a peak beam intensity of 28,276cd and a throw distance of up to
clockwise.
335 meters
· Innovative dual switch offers a user-friendly interface
· Eight rapidly switchable brightness modes to select from
· High efficiency circuit board provides up to 400 hours runtime
· Integrated power indicator light displays remaining battery power
(patented)
· Instant ultra-low or turbo to bring flexibility and convenience
· Reverse polarity protection prevents damage due to incorrectly inserted
batteries
· Stainless steel retaining ring protects the core components from
damage
· Toughened ultra-clear mineral glass with anti-reflective coating
· Constructed from aerograde aluminum alloy
· Sturdy HAIII military grade hard-anodized
· Waterproof in accordance with IPX-8 (two meters submersible)
· Impact resistant to 1.5 meters
· Tail stand capability

Dimensions Accessories
Length: 117mm (4.6”) Quality holster, lanyard,
Head diameter: 40 mm (1.57”) spare O-ring
Tube diameter: 41.8mm (1.65”)
Weight151g (5.33oz)(without battery)

Battery Options
SIZE Nominal voltage Usability
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended) Tips
Inserting batteries in a dark environment: Two of the four battery slots in
Primary AA Lithium battery L91 1.5V Y
the EA41’s battery compartment feature grooves indicating that batteries
Primary LiFePO4 battery 14500 3.2V N (Banned)
should be inserted with the negative (-) ends facing forward, while the two
Rechargeable Li-ion battery 14500 3.7V N (Banned) slots with no grooves require the batteries to be inserted with the positive
(+) ends facing forward. In this way, batteries can be inserted correctly
Output & Runtime through tactile feedback alone.
After loading the batteries, the power indicator light will blink to indicate
TURBO HIGH MID LOW LOWER
the battery power. Please refer to the “Power Tips” section of this manual
1020 580 160 50 1 for details.
LUMENS LUMENS LUMENS LUMENS LUMENS
WARNING
1. Insert batteries using the image on the inside of the battery
1h45min 2h45min 12h 30h 400h compartment as a reference.
2. Do not mix rechargeable and non-rechargeable batteries.
335m (Beam Distance) 3. Do not mix batteries of different types/brands.

28276cd (Peak Beam Intensity) On/Off Operation

To turn on: press the on/off switch to turn the light on
1.5m (Impact Resistant) To turn off: press the on/off switch again to turn the light off

IPX-8, 2m (Waterproof AND Submersible)

Standby Mode
With the light on, press and hold the on/off switch for more than one
NOTICE
second to turn off the light and activate location beacon function. The
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 4 x 1.2V 2400mAh AA blue power indicator will flash once every three seconds to indicate the
batteries under laboratory conditions. The data may vary slightly during location of the EA41. In this mode, the EA41 can keep running on 4 × AA
real-world use due to battery type, individual usage habits and environmental batteries for 120 days.
factors.
NOTE: With the power indicator off in standby mode, the EA41 can work
NITECORE (SYSMAX) is a member of PLATO, participating in and helping
for more than 12 months with 4 × AA batteries.
to develop the ANSI FL1 standard of measurement. Product testing data
is in accordance with these internationally recognized scientific
standards.

Thanks for purchasing NITECORE!

 ®
The All-Round Flashlight Expert

Brightness Levels Power Tips

With the light on, half press the mode switch to cycle through 1. With the light on, the blue LED built into the switch will flash once
brightness levels of ultra-low, low, medium, high and turbo. This mode every two seconds when battery power levels reach 50%. The blue LED
provides an intelligent memory function to ensure direct access to the will flash quickly when battery power is close to depletion
setting last used when reactivated. 2. After battery installation or with the mode switch being pressed when
the light is off, the blue LED built into the switch will blink to indicate
remaining battery power. The power indicators will blink three times
Instant ultra-low/turbo when power levels are above 50%; twice when power levels are below
Instant ultra-low: with the light off, press the on/off switch for more than 50%; and once when battery power is close to depletion.
one second to create ultra-low output of 1 lumen;
Instant turbo: with the light off, press the mode switch for more than
one sencond to create turbo output of 1020 lumens. Changing Batteries
NOTE: The EA41 will lower its output lumens after 20 minutes of use to Batteries should be replaced when any of the following occurs: The
prevent overheating and preserve battery longevity. power indicator blinks rapidly, output appears to be dim or the flashlight
becomes unresponsive.

Special modes (Strobe/Location/SOS)

With the light on, press the mode switch for more than one second to Maintenance
enter strobe mode. To cycle through all three modes of Strobe / Location / Every 6 months, threads should be wiped with a clean cloth followed by
SOS, simply press the mode switch for more than one second again. a thin coating of silicon-based lubricant.
To exit special modes, simply press the on/off switch .
Strobe ready Warranty Service
With the light off, press the mode switch twice in quick succession to
All NITECORE® products are warranted for quality. DOA / defective
enter strobe mode instantly. To exit, simply press any button and the light
products can be exchanged for replacement through a local
will turn off.
distributor/dealer within the 15 days of purchase. After 15 days, all
defective / malfunctioning NITECORE® products will be repaired free of
Lockout/Unlock charge for a period of 60 months (5 years) from the date of purchase.
With the light turned on, press and hold dual switches for more than one Beyond 60 months, a limited warranty applies, covering the cost of labor
second until the flashlight is switched off and enters into lockout mode. In and maintenance, but not the cost of accessories or replacement parts.
this mode, the EA41 can continue working on one set of batteries for over The warranty is nullified in all of the following situations:
12 months. 1. The product(s) is/are broken down, reconstructed and/or modified by
Lockout mode prevents accidental activation of the flashlight. To exit unauthorized parties.
lockout mode, simply press and hold dual switches for more than one 2. The product(s) is/are damaged through improper use.
second again. 3. The product(s) is/are damaged by leakage of batteries.
NOTE: For the latest information on NITECORE® products and services, please
When the EA41 is kept in a backpack or left unused for extended periods, contact a local NITECORE® distributor or send an email to
Nitecore recommends removing the batteries to cut off power, thus [email protected]
preventing battery drain or accidental activation of the flashlight.
The Nitecore official website shall prevail in case of any product data
changes.

Please follow our facebook for more info: NITECORE Flashlights

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: [email protected]
Web: www.nitecore.com
Address Rm1401-03, Glorious Tower, 850 East Dongfeng
Road, Guangzhou, China 510600

Thanks for purchasing NITECORE!