 

Sale!

Q800 Pro
SKU: Q800PROUK2CH32GBH

Price:
Cable Length 6.4m

Dimensions 56mm x 23mm x 28mm

£329.00 £309.00 inc. VAT

1 ADD TO BASKET

LOCAL STOCKIST

      

DESCRIPTION SPECIFICATIONS CONNECT TO THE APP INSTALLATIONS

This new model from Thinkware comes with a low profile and modern design.
The Q800 Pro features a 2K QHD front-facing camera and an optional 1080p Full HD rear-
facing camera.

Quad HD (2560×1440)
4x more vivid than HD resolution, 1440P QHD captures every little detail you may have
missed before
The Q800 Pro also incorporates ‘Super Night Vision 2.0’, a night image correction feature in
addition to Thinkware’s Cloud features, built-in A-GPS and ‘Safety Camera Alerts’.

Comes with a FREE CPL Polarising Filter* – See Details

*Filter only, no cleaning cloth included.

FRONT AND REAR VIEW FULL HD RECORDINGS

The Q800 Pro’s Image Sensors allow constant front 2K QHD resolution recording during
both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize
blind spots to assure recording of all events without fail.
SUPER NIGHT VISION 2.0
DASH CAM videos recorded in a low-light environment, such as dark alleys or parking lots,
may not be clearly identifiable.
SUPER NIGHT VISION2.0 in the Q800 PRO uses Image Signal Processing (ISP) technology
to record a clear, visible video in any situation- while driving or parked.
SONY EXMOR R STARVIS IMAGE SENSOR
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the Q800 PRO provides rich colours
and the optimal resolution.
STARVIS technology improves Exmor R’s low light sensitivity by providing optimal image
quality in visible ray and near-infrared range, allowing clear imaging in low light
environments.

ENERGY SAVING PARKING RECORDING

Energy saving parking recording will reduce power consumption by 1/3 less and gives 3x
longer video recording than normal parking mode.
When you are away for a vacation or leaving your car for quite some time, energy saving
parking recording is a recommended solution.
When in use, Q800 PRO will go to sleep and soon after an impact has been detection by
built-in G-senor, Q800 PRO will wake up within a second and start recording for the next 20
seconds of the period.
TIME LAPSE
Important clips and images may get deleted due to insufficient memory space during long
continuous recordings, especially in standard parking recording mode which requires large
memory for saving 15 to 30 frames per second.
TIME LAPSE MODE in the Q800 PRO records 2 frames per second reducing the size of the
video file. This allows video recordings in parking mode to continue up to 16 times longer
than other dash cams.
* Parking recording mode can be activated upon installing the Q800 PRO with the
hardwiring cable provided.
CLOUD APP FEATURES

GEO-FENCING
Geo-Fencing allows drivers to stay alert of the vehicle location. Whether your vehicle goes
in/outside of a certain radical area, Q800 PRO will send you a push notification through the
mobile app, THINKWARE CLOUD. This is more practical for the parents, rental companies,
and for fleet management. The radius can be set by typing the address or by using pinpoint
on the mobile app. You may set 20 different radical area with the size from 100m up to
600km.
LOCATE VEHICLE
Locate Vehicle will help drivers to find the vehicle’s current location. Q800 PRO will update
its current location in every 10 seconds. Then it will display current location with speed and
the heading direction integrated on google map.
DRIVING IMPACT NOTIFICATION
In the event of a crash, the alert feature can help the driver to notify others of an emergency
situation when the driver is not in the condition to do so. The family or the owner of the car
can then remotely check on the situation from their location.
When the car experiences an impact with a g-force level greater than 3g or 4g while driving,
the dash cam will automatically send a push notification alert of the impact to the user’s
smartphone logged in to the THINKWARE CLOUD app.
A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on
the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user,
which can be checked later and downloaded from the app.

SAFETY CAMERA ALERT

The THINKWARE DASH CAM Q800 PRO’s internal GPS provides accurate location
information while the Safety Camera Alert function is on continuous alert to warn the driver
of red lights and traffic enforcement cameras.
• RED LIGHT WARNING SYSTEM

• SPEED CAMERA WARNING SYSTEM

• RED LIGHT & SPEED CAMERA WARNING SYSTEM

• AVERAGE SPEED WARNING SYSTEM

• MOBILE ZONE WARNING SYSTEM

• ROAD SAFETY WARNING SYSTEM

The THINKWARE DASH CAM Q800 PRO is equipped with the Lane Departure Warning
System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning
System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with
a voice warning.

Lane Departure Warning System (LDWS)

Drowsy or distracted driving greatly increases the chance of an accident on the road.
The Lane Departure Warning System will alert the driver when the vehicle goes off the lane
in a speed over 50 km/h.

High Speed / Urban Forward Collision Warning System (FCWS/ uFCWS)

Accidents can be avoided by maintaining a safe following distance. Road Safety Warning
System in the Q800 PRO calculates the real-time distance between your vehicle and the
vehicle in front of you while driving above 30 km/h in expressways or under 30 km/h in a
busy city, and issues a 3-level early warning to the driver depending on the danger of
collision.

Front Vehicle Departure Warning (FVDW)

When your car is stopped at an intersection or in traffic, the intelligent guidance system
informs you that the vehicle in front has started to move, preventing a delayed response just
in case you stop looking ahead.

VIDEO ENHANCEMENT TECHNOLOGY

THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on
the market, ensuring the most vivid video recordings under any circumstance.

WIDE DYNAMIC RANGE

When you are driving under bright sunlight, coming out of a tunnel, or getting under the
shadow of a tall building etc, a sudden change in frontal light exposure levels can result in
excessively bright or dark recordings.
The WDR function eliminates excessively bright spots on the recording to correct its colour
balance in order to ensure a clear image.
NIGHTTIME PICTURE QUALITY CORRECTION
Images from the videos recorded during nighttime driving on dark streets are generally
difficult to make out.
The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of
brightness and colour control as well as noise cancellation.

AUTOMATIC EXPOSURE
A sudden rise of light exposure caused by strong sunlight or headlight beams of the
oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a
dark tunnel or night driving may pose the same problem.
The automatic light exposure function controls the level of light exposure to maintain vivid
and clear video recordings in all circumstances.

VARIOUS AUTONOMOUS RECORDING MODES

Various Recording Modes and Automatic Switch between Modes
Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved
in one-minute segments with an auto-looping mechanism.

Incident Recording Mode

The Active Impact Monitoring System will automatically store the video data ten seconds
prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode

Similar to a video camera, you can use the Manual Recording Mode to capture events that
occur in front of your vehicle whether or not it is in motion.

Energy Saving Mode

The dash cam will go to sleep and soon after an impact has been detection by built-in G-
senor, Q800 PRO will wake up within a second and start recording for next 20 seconds of the
period.

CHECK RECORDED IMAGES AND UPDATE FIRMWARE USING SMARTPHONES

Your smartphone and the Q800 PRO can be connected via the exclusive
application ‘THINKWARE DASH CAM Mobile Viewer for Q800 PRO’ with built-in Wi-Fi in
the navigation. Check, download or delete recorded images, update firmware or update safe
driving information on the application.
VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy
and convenient viewing of your recorded videos.
Through PC or Mac viewer, you can playback and download recorded videos along with your
route history and speed record.
You can also change the dash cam settings, format the memory card, or install updates with
just a few clicks on the viewer.
COMPREHENSIVE DRIVING DATA THROUGH BUILT-IN GPS
Using the GPS data in Q800 PRO, it can precisely pinpoint the vehicle’s location and routes
with its driving speed on the map.
The GPS helps you accurately assess the status of the accident by providing you with the
vehicle speed, the direction of the collision and the severity of an impact. The DASH CAM
not only records driving footage but can also be used to track and recall past driving routes
whether it be work or holiday routes.
HIGH-TEMPERATURE PROTECTION SYSTEM
The specially designed heat discharge construction and the built-in thermal sensor of the
Q800 PRO protect the device and its data against intense heat by automatically turning it off
to prevent overheating.

This site acts as the approved UK distributor. We offer the official, reliable and award-winning
Thinkware products directly to you.

Authorised Dealer Page

Terms & Conditions

Privacy Policy

Warranty

Copyright 2019 © Chameleon Codewing Ltd