Scribd Logo
Upload

Welcome to Scribd!

  • 0 views

    Fender

    Uploaded by

    snukdolf

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fender

    Uploaded by

    snukdolf
    0 views7 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    0 views7 pages

    Fender

    Uploaded by

    snukdolf

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    7/31/2016 2015 Edge

    501­02 Front End Body Panels 2015 Edge


    Removal and Installation Procedure revision date: 01/30/2015

    Fender

    Removal

    NOTE: Removal steps in this procedure may contain installation details.

    NOTE: LH side shown, RH side similar.

    1. Remove the fender splash shield.


    Refer to: Fender Splash Shield (501­02 Front End Body Panels, Removal and Installation).

    2. Remove the retainers and the door frame moulding.

    3. Remove the bolt.


    Torque: 106 lb.in (12 Nm)

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/7
    7/31/2016 2015 Edge

    4. Remove the bolts and separate the front bumper cover from the fender bracket.
    Torque: 22 lb.in (2.5 Nm)

    5. Remove the headlamp assembly.


    Refer to: Headlamp Assembly (417­01 Exterior Lighting, Removal and Installation).

    6. Remove the fender bolts.


    Torque: 55 lb.in (6.2 Nm)

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/7
    7/31/2016 2015 Edge

    1. Remove the bolts.


    Torque: 80 lb.in (9 Nm)
    2. Remove the retainers and the cowl filler panel.

    8. Remove the bolts.


    Torque: 106 lb.in (12 Nm)

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/7
    7/31/2016 2015 Edge

    9. Remove the bolt.


    Torque: 106 lb.in (12 Nm)

    10. Carefully cut the foam sealant.

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 4/7
    7/31/2016 2015 Edge

    11. Remove the sound insulation.

    12. Remove the bolts and the fender.


    Torque: 106 lb.in (12 Nm)

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 5/7
    7/31/2016 2015 Edge

    Installation

    1. To install, reverse the removal procedure.

    2. After installation, check the alignment and correct if necessary.


    Refer to: Body and Frame (501­26 Body Repairs ­ Vehicle Specific Information and Tolerance Checks, Description
    and Operation).

    Copyright © 2016 Ford Motor Company

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 6/7
    7/31/2016 2015 Edge

    http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 7/7

    You might also like