Scribd
Upload
4 views

simulation-programs

Uploaded by

Khyathi Kiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

simulation-programs

Uploaded by

Khyathi Kiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

1. Implement three nodes point – to – point network with duplex links between them.

Set
the queue size, vary the bandwidth and find the number of packets dropped.

TCL Program:

lab1.tcl

set ns [new Simulator]


set nf [open lab1.nam w]
$ns namtrace-all $nf
set tf [open lab1.tr w]
$ns trace-all $tf
proc finish { } {
global ns nf tf
$ns flush-trace
close $nf
close $tf
exec nam lab1.nam &
exit 0
}
set n0 [$ns node]
set n1 [$ns node]
set n2 [$ns node]
set n3 [$ns node]
$ns duplex-link $n0 $n2 200Mb 10ms DropTail
$ns duplex-link $n1 $n2 100Mb 5ms DropTail
$ns duplex-link $n2 $n3 1Mb 1000ms DropTail
$ns queue-limit $n0 $n2 10
$ns queue-limit $n1 $n2 10
set udp0 [new Agent/UDP]
$ns attach-agent $n0 $udp0
set cbr0 [new Application/Traffic/CBR]
$cbr0 set packetSize_ 500
$cbr0 set interval_ 0.005
$cbr0 attach-agent $udp0
set udp1 [new Agent/UDP]
$ns attach-agent $n1 $udp1
set cbr1 [new Application/Traffic/CBR]
$cbr1 attach-agent $udp1
set udp2 [new Agent/UDP]
$ns attach-agent $n2 $udp2
set cbr2 [new Application/Traffic/CBR]
$cbr2 attach-agent $udp2
set null0 [new Agent/Null]
$ns attach-agent $n3 $null0
$ns connect $udp0 $null0
$ns connect $udp1 $null0
$ns at 0.1 "$cbr0 start"
$ns at 0.2 "$cbr1 start"
$ns at 1.0 "finish"
$ns run

AWK program
BEGIN { c=0;
}
{
if ($1=="d")
{
c++;
printf("%s\t%s\n",$5,$11);
}
}
END{
printf("The number of packets dropped =%d\n",c);
}
Commands
ns lab1.tcl
awk -f lab1.awk lab1.tr
2. Implement transmission of ping messages/trace route over a network topology consisting
of 6 nodes and find the number of packets dropped due to congestion.
TCL Program:

lab2.tcl
set ns [ new Simulator ]
set nf [ open lab2.nam w ]
$ns namtrace-all $nf
set tf [ open lab2.tr w ]
$ns trace-all $tf

set n0 [$ns node]


set n1 [$ns node]
set n2 [$ns node]
set n3 [$ns node]
set n4 [$ns node]
set n5 [$ns node]
$n4 shape box

$ns duplex-link $n0 $n4 1005Mb 1ms DropTail


$ns duplex-link $n1 $n4 50Mb 1ms DropTail
$ns duplex-link $n2 $n4 2000Mb 1ms DropTail
$ns duplex-link $n3 $n4 200Mb 1ms DropTail
$ns duplex-link $n4 $n5 1Mb 1ms DropTail

set p1 [new Agent/Ping]


$ns attach-agent $n0 $p1
$p1 set packetSize_ 50000
$p1 set interval_ 0.0001

set p2 [new Agent/Ping]


$ns attach-agent $n1 $p2

set p3 [new Agent/Ping]


$ns attach-agent $n2 $p3
$p3 set packetSize_ 30000
$p3 set interval_ 0.00001

set p4 [new Agent/Ping]


$ns attach-agent $n3 $p4

set p5 [new Agent/Ping]


$ns attach-agent $n5 $p5

$ns queue-limit $n0 $n4 5


$ns queue-limit $n2 $n4 3b
$ns queue-limit $n4 $n5 2

Agent/Ping instproc recv {from rtt} {


$self instvar node_
puts "node [$node_ id] received answer from $from with round trip time $rtt msec"
}

$ns connect $p1 $p5


$ns connect $p3 $p4

proc finish { } {
global ns nf tf
$ns flush-trace
close $nf
close $tf
exec nam lab2.nam &
exit 0
}
$ns at 0.1 "$p1 send"
$ns at 0.2 "$p1 send"
$ns at 0.3 "$p1 send"
$ns at 0.4 "$p1 send"
$ns at 0.5 "$p1 send"
$ns at 0.6 "$p1 send"
$ns at 0.7 "$p1 send"
$ns at 0.8 "$p1 send"
$ns at 0.9 "$p1 send"
$ns at 1.0 "$p1 send"
$ns at 1.1 "$p1 send"
$ns at 1.2 "$p1 send"
$ns at 1.3 "$p1 send"
$ns at 1.4 "$p1 send"
$ns at 1.5 "$p1 send"
$ns at 1.6 "$p1 send"
$ns at 1.7 "$p1 send"
$ns at 1.8 "$p1 send"
$ns at 1.9 "$p1 send"
$ns at 2.0 "$p1 send"
$ns at 2.1 "$p1 send"
$ns at 2.2 "$p1 send"
$ns at 2.3 "$p1 send"
$ns at 2.4 "$p1 send"
$ns at 2.5 "$p1 send"
$ns at 2.6 "$p1 send"
$ns at 2.7 "$p1 send"
$ns at 2.8 "$p1 send"
$ns at 2.9 "$p1 send"
$ns at 0.1 "$p3 send"
$ns at 0.2 "$p3 send"
$ns at 0.3 "$p3 send"
$ns at 0.4 "$p3 send"
$ns at 0.5 "$p3 send"
$ns at 0.6 "$p3 send"
$ns at 0.7 "$p3 send"
$ns at 0.8 "$p3 send"
$ns at 0.9 "$p3 send"
$ns at 1.0 "$p3 send"
$ns at 1.1 "$p3 send"
$ns at 1.2 "$p3 send"
$ns at 1.3 "$p3 send"
$ns at 1.4 "$p3 send"
$ns at 1.5 "$p3 send"
$ns at 1.6 "$p3 send"
$ns at 1.7 "$p3 send"
$ns at 1.8 "$p3 send"
$ns at 1.9 "$p3 send"
$ns at 2.0 "$p3 send"
$ns at 2.1 "$p3 send"
$ns at 2.2 "$p3 send"
$ns at 2.3 "$p3 send"
$ns at 2.4 "$p3 send"
$ns at 2.5 "$p3 send"
$ns at 2.6 "$p3 send"
$ns at 2.7 "$p3 send"
$ns at 2.8 "$p3 send"
$ns at 2.9 "$p3 send"
$ns at 3.0 "finish"
$ns run
AWK Program:
lab2.awk

BEGIN{
drop=0;
}
{
if($1=="d" )
{
drop++;
}
} END{
printf("Total number of %s packets dropped due to congestion =%d\n",$5,drop);
}
Commands
ns lab2.tcl
awk -f lab2.awk lab2.tr

3. Implement an Ethernet LAN using n nodes and set multiple traffic nodes and plot
congestion window for different source / destination.

TCL Program:

lab3.tcl

set ns [new Simulator]


set tf [open lab3.tr w]
$ns trace-all $tf
set nf [open lab3.nam w]
$ns namtrace-all $nf
set n0 [$ns node]
$n0 color "magenta"
$n0 label "src1"
set n1 [$ns node]
set n2 [$ns node]
$n2 color "magenta"
$n2 label "src2"
set n3 [$ns node]
$n3 color "blue"
$n3 label "dest2"
set n4 [$ns node]
set n5 [$ns node]
$n5 color "blue"
$n5 label "dest1"
LanRouter set debug_ 0
$ns make-lan "$n0 $n1 $n2 $n3 $n4" 100Mb 100ms LL Queue/DropTail Mac/802_3
$ns duplex-link $n4 $n5 1Mb 1ms DropTail
set tcp0 [new Agent/TCP]
$ns attach-agent $n0 $tcp0
set ftp0 [new Application/FTP]
$ftp0 attach-agent $tcp0
$ftp0 set packetSize_ 500
$ftp0 set interval_ 0.0001
set sink5 [new Agent/TCPSink]
$ns attach-agent $n5 $sink5
$ns connect $tcp0 $sink5
set tcp2 [new Agent/TCP]
$ns attach-agent $n2 $tcp2
set ftp2 [new Application/FTP]
$ftp2 attach-agent $tcp2
$ftp2 set packetSize_ 600
$ftp2 set interval_ 0.001
set sink3 [new Agent/TCPSink]
$ns attach-agent $n3 $sink3
$ns connect $tcp2 $sink3
set file1 [open file1.tr w]
$tcp0 attach $file1
set file2 [open file2.tr w]
$tcp2 attach $file2
$tcp0 trace cwnd_
$tcp2 trace cwnd_
proc finish { } {
global ns nf tf
$ns flush-trace
close $tf
close $nf
exec nam lab3.nam &
exit 0
}
$ns at 0.1 "$ftp0 start"
$ns at 5 "$ftp0 stop"
$ns at 7 "$ftp0 start"
$ns at 0.2 "$ftp2 start"
$ns at 8 "$ftp2 stop"
$ns at 14 "$ftp0 stop"
$ns at 10 "$ftp2 start"
$ns at 15 "$ftp2 stop"
$ns at 16 "finish"
$ns run

AWK Program:

lab3.awk

BEGIN {
}
{
if($6=="cwnd_")
printf("%f\t%f\t\n",$1,$7);
}
END {
}

Commands
ns lab3.tcl
awk -f lab3.awk file1.tr > a1
awk -f lab3.awk file2.tr > a2
xgraph a1 a2

You might also like