Scribd
Upload
28 views1 page

HPI B217 Data Recorder 07-2024EN

Uploaded by

sunny gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views1 page

HPI B217 Data Recorder 07-2024EN

Uploaded by

sunny gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

B217-DR Data Recorder – Technical Data

The B217-DR Data Recorder


is an indispensable measuring system for accurately
measuring transient & time phenomena of various
applications. It is a small and compact desk top device
containing a charge amplifier, AD-Converter and time
measuring system. It is software operated by our custom
made B3000 BWF Work Frame

System requirements:
- Win7 / Win10 operating system, MS Office
- B3000 BWF Ballistic Workframe
- B217 BWF Software Module

Maximum stackable desk top units: Example of measuring result, by showing filtered and
• 4 Analog Channels (pressure) unfiltered pressure curve in one graphic
• 8-time input channels (for 4 time or velocity
phenomena)
Desk Top Unit including:
• 1 Transient channel
• Amplitude resolution 16 Bit (18 Bit oversampling)
• Max. sampling rate 10MHz
• Input memory 2 MWords
• Voltage input range +/- 10 Volt
• Input impedance 100 kOhm/10pF
• 2-time input channels
• Power input DC 15-30 Volt, 15 Watt via external
power supply 85 - 265 V, 50/60 Hz
• Link connection to synchronize up to 4 B217-DR Selectable Digital Filters:
• 2 LAN interfaces min. 100 Mbit/s with built in switch • Bessel
• Butterworth
• Data transfer via optional W-LAN unit
• Moving Average
• Built in calibration/test signal • Others on Request
Charge input:
• 1 Charge input for a piezoelectric transducer
• Input range: +/- 50000 pC
• Frequency range: 250 kHz (-3dB)
• Drift: ≤ 0.05 pC/s
• Cut off Frequency > 0.01 kHz
Time Channel:
Example for CIP Measurement:
• Time measurement, 1 start and 1 stop input (1x max pressure / 1x gas pressure curve / 1x time/velocity):
• Counter resolution 0.05μs (20MHz)
• Software selectable signal conditioner
• TTL/Pulse mode for different sensors (e.g. light
screens, etc., ...)
• Contact mode for insulated start pin
• Piezo mode (charge input) for accelerometer and
blast wave sensor

Dimensions: 270x175x50mm
Example for NATO Measurement:
Weight: 1.8 kg
(2x max pressure / 2x gas pressure curve / 2x time/Velocity):

Subject to change without notice page 1 / 1 07/2024EN

You might also like