IL&FS
IL&FS
Reinforced cement Concrete grade conforming to IS:456 with coarse sand and graded hard
stone aggregate 20 mm and down nominal size at all heights/depths from finished ground
floor level including addition of suitable plasticizer / super plasticizer (if required) conforming
to IS:9103 (latest) to achieve required slump in concrete. he rate shall include cost of all materials,
3
all labors, plant & machinery, tools & tackles, consumables, all transporations, loading & unloading and
supervision, etc all complete and as directed by the Engineer in charge.
RCC M 20 - for foundations, columns, plinth beams, Tie beams, Roof slab and roof beams, Cum
52.37 6,425.00 3,36,477.25
Staircase also.
Supplying, fixing and removing formwork at all elevations including labour, material, scaffolding,
4 providing pockets complete etc as per specifications and as directed by engineer for the following
Ordinary form work for all concrete elements at all heights. Sq.m 472.20 310.00 1,46,382.00
Providing Reinforcement using High yield strength deformed bars confirming to grade Fe500 confirming
to IS:1786 for all reinforced concrete elements. The rate shall include all materials, all labor charges,
straightening, cutting, bending, placing in position at all levels, binding in position including cost of
5 Mt 7.70 98,000.00 7,54,600.00
binding wire, all transportations, loading & unloading, plant & machinery, tools & tackles,
consumables, etc. complete and as
directed by the Engineer in charge.
Providing and constructing 230 mm thick brick work in cement mortor 1:4 (1 Cement
:4 Coarse sand ) using bricks of class designation 7.5 or locally available best quality bricks in walls at
all heights, including raking out the joints, curing and scaffolding. The rate shall include all
6 cum 49.50 5,955.00 2,94,772.50
materials, all labor charges, all transportations, loading & unloading, plant & machinery, tools &
tackles, consumables, etc. complete and as directed by the Engineer in charge.
Providing and plastering the surface with 12 mm thick in single layer using cement mortar
1:4 finished to smooth sponge surface including making grooves at the required places as per drawing.
The rate shall include all materials, all labor charges, all transportations, loading & unloading,
7
plant & machinery, tools & tackles, consumables, etc. complete and as directed by the Engineer in
charge.
Providing and finishing the external wall surfaces with 2 coats of Exterior tractor emulsion
(Asian Apex or equivalent) over one coat of approved quality of exterior primer to give an even
shade including preparing the surface. The rate shall include cost of all materials, all labor charges,
(b) Sqm 234.76 185.00 43,430.60
tools & tackles, consumables, all transportations, loading & unloading, supervision, etc., complete
and as directed by the Engineer - in - Charge.