1 .
Implement an IoT-based system to turn ON and turn OFF LED and also
monitor the status of LED using the Blynk app/BT terminal app.
3.Implement an IoT-based system to turn ON and turn OFF LED using
Pushbutton.
4.Implement an IoT-based system to control the speed of blinking of LED
using digital input(key).
5. Implement an IoT-based system to control the speed of blinking of LED
using the BT Terminal app.
8. Implement an IoT-based system to read LDR input and to turn off LED
when the light is bright.
7. Implement an IoT-based system to read LDR input and to turn on LED
when the light is dim.
9. Implement an IoT-based system to measure the distance of an object
and to turn ON LED if the object is closer to 5.5 CM.
11. Implement an IoT-based system to turn ON and OFF LED 10 times
followed by a 5-second delay repeatedly.
12. Implement an IoT-based system to turn ON and OFF LED 10 times
followed by a 10-second delay repeatedly.
19. Implement an IoT-based system to measure the distance of an object
and to turn ON LEDif the object is closer to 3.2 CM.
21 and 13. Implement an IoT-based system to count the number of times
key A is pressed in the serial Monitor. Use key B as reset.
6. / 16. / 18. DHT11 from record
10. ThingSpeak using DHT11 from record
14. Push Button led from record
15. / 20. BT terminal app from record
17. ThinkSpeak using LED from record
