JioFi

5 steps
to be connected
everywhere.
1 Know your JioFi
Network signal
strength WiFi indicator
Power indicator
button
Power Battery WPS
indicator indicator button

USB charging port

2 Open the back cover and install the
SIM and SD cards. To install the
SIM card, insert the SIM card with
the IC chip facing down. To install
the SD card, slide the SD tray
downwards (OPEN) to lift the tray,
insert the SD card with the IC chip
facing down, and slide the tray
upwards (LOCK) to secure the tray.

Commodity: Router JMR1140(Black)

RSN: RAMMFLC00000001 MAC ID: 581D91000000
IMEI: 911504950000010 EAN: 8809423980096
SSID: JioFi4_000000
PWD: abcd000000
System Log IN

USERNAME/PWD:
administrator
3 Remember or write down the SSID
(Service Set Identifier) and
Password mentioned in the battery
compartment before inserting the
battery and replacing back cover.

Commodity: Router JMR1140(Black)

RSN: RAMMFLC00000001 MAC ID: 581D91000000
IMEI: 911504950000010 EAN: 8809423980096
SSID: JioFi4_000000
PWD: abcd000000
System Log IN

USERNAME/PWD:
administrator
4 The Setup is done. Now Turn ON
your device and connect up to 31
WiFi enabled devices on your
wireless network by using the SSID
and password.
 To connect quickly, press WPS
button for 3 seconds and then
press the WPS button on your
wireless device to connect.

5 Welcome to your digital life.

Download Jio4GVoice on your
smart phone to enable HD Voice
Calling and Video Calling using your
JioFi.
* JioFi works with Jio SIM card only.

About your device

Charging the device
When charging the battery for the first time,
it is recommended to charge it to 100% with
adapter and cable provided in turned OFF
position.

Charging time
USB Cable ~ Approx. 6hrs 10mins
Power adapter ~ Approx. 3hrs 30mins

Battery life on LTE*

*Depends on network conditions
Standby time ~ Approx. 480hrs
Running time ~ Approx. 7-8hrs
Turning the device ON or OFF
To turn ON the device, press and hold the
Power button for 1 second.
To turn OFF the device, press and hold the
Power button for 3 seconds.

Resetting the device

Occasionally, you may need to perform a
Factory reset when you forget login username
or password. To reset, press the Power
button and the WPS button simultaneously
for 5 seconds. The four LED indicators will
blink in blue at the same time.
Indicators
Power On Power save mode/Sleep mode*

Blink Normal mode

Power save mode/Sleep mode*

On
in no service

Blink Fast Normal mode in no service

Network signal On Good Signal

strength
On Medium Signal

On Weak Signal

No service/SIM card error/

Blink Fast
no SIM card

Battery Battery high/AC adaptor

On
connected without battery inside

Blink Charging while Battery is high

On Battery medium

Blink Charging while Battery is medium

On Battery low

Blink Charging while Battery is low

Too low to power on

Blink Fast
(when device is powered off)
WiFi On WiFi connected

Blink Transferring data

Blink Fast WPS standby

On WiFi standby

All 4 LEDs

On Firmware upgrade

*Sleep mode (Low power consumption)

Your device will enter a sleep mode after some
time (when there is no device connected).
Short press the Power button to bring it back to
active state. This time period can be altered
through WebGUI or managed devices section of
MyJio App or jio.com.
Manage your device
Using the Web Configuration utility

Change the network name (SSID), the

Security Mode and Key, configure the
sleep mode and other settings.
1 Connect your Computer/Smartphone to JioFi
device over USB or WiFi interface.

2 Enter the URL: http://jiofi.local.html in address bar

of the browser to open the web configuration
page.

3 Click the 'Login' button on the top right corner of

web page screen by using 'administrator' as
username and password to access the homepage
of Web Configuration utility.

4 Customize network, WiFi and other parameters

and access SD card over WiFi using the web
configuration utility. You can also customize some
settings by accessing the JioFi widget. Download
the MyJio App and access the above widget.

5 Certain end user applications like online console

gaming and online streaming like DVR need certain
ports to be opened. Kindly check for Gaming and
Apps Management Tab in Web Configuration
Utility for more details, and for further help please
 contact
JioCare.

For fast support

A user cannot access the Internet
Please check if the user is connected to JioFi SSID.
Make sure your SIM card is properly inserted.
Check if your JioFi is connected to the network.
Ensure your sim card is activated and has adequate
data balance available.

Not able to change my device settings

Please connect computer/smartphone to your JioFi
device over USB/WiFi interface.
Enter http://jiofi.local.html in the browser’s URL
input field. Click the 'Login' button on the top right
corner of your web page screen. The default
username and password are 'administrator'.

Cannot establish a WiFi connection

Please make sure the WiFi is active on your JioFi.
Refresh the network list in your computer/smart-
phone and select the correct SSID. Type the correct
network key (WiFi password) when you connected to
your JioFi.
Safety
To the Owner
Always keep the device at a distance of 20cm from
medical devices like hearing aids, pacemakers as it
may interfere while the device is turned on. It is
advisable to consult your physician or the manufactur-
er of the medical device before using your device.

Avoid using device in areas with high electromagnetic

radiations.

Avoid overnight charging of the device.

Be aware of the usage limitation when using your

device at places such as aircrafts, petrol stations,
hospitals, oil warehouses or chemical factories, where
there are explosive gases or explosive products being
processed. Turn off your device if required.

Do not open and touch the inner area of your device

as it may affect your device performance.

Keep the device out of children’s reach. Your device

may cause injury if used as a toy.
Do not touch metallic parts of your device as they may
become hot when the device is working.
Using your Device
Use only original and authorized accessories.
Unauthorized accessories may affect your device
performance.
Do not expose your device to moisture or water.
Handle carefully. Do not drop!
Kindly use your device with a Nano Sim card only. Do
not try to insert sim card of any other size as this may
lead to damage to sim slot connector pins and might
render your device useless.

Battery Usage precautions

DO NOT - short circuit or try to disassemble the
battery as it may cause fire.
Always store battery in cool dry place.
Always use genuine and authorized charger to charge
the battery.
Replace worn out battery with authorized and genuine
battery.
Dispose worn out battery in an appropriate way.
Battery to be used for intended purpose only.

RoHS and Disposal

This product is RoHS compliant.
Do not dispose with household waste.
Information
Technical specifications
General
Supported OS WinXP (SP3 onwards)/Vista/Win7/
Win8/Win10/MAC/Linux
Input voltage 5V
Output voltage 4.35V Maximum
Maximum power 3.5W
consumption
Memory 2Gbit ROM and 2Gbit RAM

External interfaces Micro-USB port

Nano-SIM card interface
Micro-SD card interface (up to 32GB)
Operating temp. charge Charging: 0 ˚C~+40 ˚C
Discharge: 0 ˚C~+60 ˚C
Dimensions (L*W*H) 88.7 x 78.9 x 16.6mm
No. of device supported 31(WiFi) + 1(USB tethering)

Bands
Standards compliance WAN: LTE (2300/1800/850MHz)
WLAN: IEEE 802.11b/g/n 2.4G only

Battery
Rated capacity 2,600mAh
Maximum charge voltage 4.35V

Power adaptor
Input power supply AC 100~240V
Output power supply DC 5V

Environmental
Ambient temperature Operating: 0 ˚C~+40 ˚C
Storage: -20 ˚C~+60 ˚C
Humidity 5% to 95% (non-condensing)
SAR body value 0.843 W/kg
With love, from Jio
Reach us
If you have further question or require personal
assistance, please contact JioCare by calling or
sending on email.

Phone: 198 from your Jio number or

1800-88-99999 from any network
(24 Hrs.)

Email: [email protected]

Visit www.jio.com

We wish you a beautiful experience with

Jio.