PNDValves_Catalog_PH

Digital and Proportional
Miniature Solenoid
Valves
Pneutronics Division
Parker Hannifin Corporation

Parker Life Sciences
1 www.parker.com/lifesciences
Catalog PND-MSV-001/US
VALVES X-Valve
8mm Universal Solenoid Valve

X-Valve ®
Miniature Solenoid Valves
X-Valve® is a two-position, three-way universal solenoid valve, just 8mm in

width. The X-Valve’s unitized body incorporates its functional features in a
single glass-reinforced, PBT (Polybutylene Terephthalate) molded body.
Features
✦ Provides compact size; only 8mm in width.
✦ Meets a range of pressure requirements including 6, 30 & 100 psi.
✦ Offers optional capabilities to meet a 0.016 sccm leakage specification (0.2
sccm for 100 psi) for over 25 million cycles.
✦ Ensures high reliability with its single piece body design.
✦ Allows for direct tubing connection or a radial seal for manifold assemblies
through its universal barb design.
Physical Properties Electrical Performance Characteristics

Power:
Valve Type: 0.5 Watt (low pressure model) Leak Rate:
3-Way, 2 Position 1.0 Watt (high pressure model) < 0.016 sccm (6 psi Silicone)
NO, NC & Distributor < 0.16 sccm (6 psi EPDM & FKM)
(100 psi, NC only) Voltage: < 0.2 sccm (100 psi only)
3, 5, 12, 24 VDC
Media: Not all voltage options are available Response:
Non-Reactive Gases and Select in all models. See Ordering Info. < 20 msec cycling
Liquids Pressure:
Electrical Connections:
Operating Environment: PC Pins, 4 mm centers (all models) 0 to 6 psig
0 to 50°C 0 to 30 psig
15 to 50°C for 100 psi 0 to 100 psig
Storage Temperature: Wetted Materials Minimum Flow:
-40 to 70°C PBT (Polybutylene Terephthalate); 4 lpm @ 6 psi
Length: 430 Series Stainless Steel; 302 6 lpm @ 30 psi
24 mm (.92 in) Series Stainless Steel (passivated); 9 lpm @ 100 psi
FKM (Fluoroelastomer); EPDM Orifice Sizes/Equivalent Cv:
Width: (Ethylene Propylene Diene
7.9 mm (.31 in) 0.020”/0.005 Cv (100 psid)
Monomer); and Silicone 0.030”/0.010 Cv (30 psid)
Height:
Consult factory for details. 0.045”/ 0.018 Cv (6 psid)
9 mm (.35 in)
Spacing:
8 mm (centerline)
Porting:
Universal barbs for 1/16” I.D. tubing
(1/32” Wall Max.); Manifold mount
with X-seal
Weight:
0.16 oz (4.5 grams)
Internal Volume:
0.074 cm3 (.0045 in3)
Parker Hannifin Corporation

www.parker.com/pneutronics
Catalog PND-MSV-001/US
X-Valve VALVES
Miniature Solenoid Valves

Flow
Dimensions
Ordering Information
Sample Part ID X 1 05 1 F _ 0
Description Series Model Voltage Electrical Elastomer _ Optional Accessories
Connection
No: Pressure/Orifice/Coil Wattage/Type 03: 3 VDC S: Standard Pins F: FKM S: Screws (2)
1: 6 psi/0.045"/0.5 Watt/Universal 05: 5 VDCc L: Long Pin E: EPDM G: Gasket
(6psi only) (6psi only)
Options 2: 30 psi/0.030"/1 Watt/Universal B: Screw & Gasket
5: 100 psi/0.020"/1 Watt/NC 12: 12 VDC S: Silicone 0: No Accessories
(6psi only)
24: 24 VDC
Accessory field not printed
on valve
To order, please call 1.603.595.1500
Parker Hannifin Corporation

Rev. 02/2007
Catalog PLS01-1001/US
VALVES X-SYSTEM
Inline Assembly/Diverter Assembly

Miniature Valves
X-System ™
X-System ™ offers molded modular pneumatic manifold technology designed
to support the 8 mm X-Valve ® products. The X-System is a durable thermo-
elastomer assembly incorporating several innovative design features and
provides significant advantages over traditional aluminum materials. It is
available in both inline and diverter assembly configurations.
Features
✦ No screws or seals required for valve mounting.
✦ Lightweight and low cost.
✦ Ideal for "rapid prototyping" (eliminates the need for machining a manifold).
✦ Mixed 2-Way and 3-Way assemblies possible (consult factory).
✦ "Mixed" pneumatic logic in diverter assembly; multiple operating pressures
include vacuum, hybrid, and partitioned manifold options.
✦ Shorter OEM design cycles and faster delivery times.
Physical Properties Dimensions
Media: Inline Assembly

Air & Inert Gases
Leakage:
0.016 sccm external
Operating Temperature:
0 to 50° C
Valve Mounting Centerline:
8 mm (0.31 in)
Electrical Connection Centerline:
4 mm (0.16 in)
Storage Temperature:
-40 to 70° C
Pressure:
0 to 30 psig
Size (stock profile):
25.4 mm x 13.5 mm (1.0 in x 0.53 in)
Service Life (cycles of valve assembly
and disassembly):
3 minimum
Flow SLPM:
Unrestricted X-Valve flow
Special Notes
See X-Valve ® (page 2) for valve description.
Parker can assemble a manifold to meet
your pneumatic specifications. Standard
manifold is offered through ten positions;
consult factory for application requiring
more than ten positions.
X-Valve is a registered trademark and X-System

is a trademark of Parker Hannifin Corporation.

VALVES X-SYSTEM
Miniature Valves
Diverter Assembly
Sample Part ID 912 _ 000 6 02 _ 1 01

Description Series _ End Caps Number of Valves on _ Configuration X-Valve Selection
Left of Diverter
X-System 6: No 01-10 1: 2-Way NC (common supply to NC Port1, Port 3 plugged) 01-18
7: Yes Consult factory for 2: 2-Way NC (common supply to common Port 2, Port 3 plugged) Insert the last two digits
larger assemblies of the valve 912 p/n in
Options 3: 2-Way NO (common supply to common Port 2, Port 3 plugged)
this location
4: 2-Way NO (common supply to NO Port 3, Port 1 plugged)
Inline 5: 3-Way NC (common supply to NC Port 1) (See Doc.#:
912-000001-XXX
Assembly 6: 3-Way NO (common supply to NO Port 3) Contact factory for
7: Distributor (common supply to common port 2) information)
8: 3-Way NC (common supply to NC Port 1, common exhaust)*

* Not available with end caps
Sample Part ID 912 _ 6 6 01 01 _ 6 01

Description Series _ End Caps Number of Valves on X-Valve Selection Diverter Module Selection _ Number of Valves on X-Valve Selection
Left of Diverter Right of Diverter
X-System 6: No 0-9 01-18 01: Diverter Block 1 0-9 01-18
7: Yes Total number of valves Insert the last two digits 02: Diverter Block 2 Total number of valves Insert the last two digits
not to exceed 10 of the valve 912 p/n in not to exceed 10 of the valve 912 p/n in
Options 03: Diverter Block 3
(Consult factory for this location (Consult factory for this location
additional 04: Diverter Block 4 additional
(Contact factory for
Diverter requirements)
information)
05: Diverter Block 5 requirements)
(See Doc.#:
Assembly 06: Diverter Block 6 912-000001-XXX
Contact factory for
07: Diverter Block 7 information)
08: Diverter Block 8
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,
or call and refer to Drawing #s: 890-003100-001 (inline); 890-003112-001 (diverter) and Spec. #790-002176-001.
For more information, call us toll-free at 1-800-525-2857

VALVES TEN-X
10mm Solenoid Valve

Miniature Valves
Ten-X®
Ten-X® is a 10mm solenoid valve with a two-position, two-way Normally
Open (NO) design. Ten-X delivers repeatable "energized" and "de-energized"
response times, low power, and flow capability to meet the specific
performance requirements of Non-Invasive Blood Pressure (NIBP) devices.
Features
✦ Delivers fast and repeatable "open" and "drop-out" response times (<5 msec
includes first shot "open" times) critical to step deflation algorithms over
the entire environmental temperature range and continuous duty operation
of the valve.
✦ Highest flow of any 10mm solenoid valve with a Cv of .032 and flow of
8 slpm @ 6 psig.
✦ Meets the demands for bleed and dump processes, ensuring comfortable
and safe operation.
✦ Single piece body design reduces total size and part count. Fewer parts
increase reliability and reduce both the number of potential leak points and
the overall "stack-up" tolerances.
✦ Universal barb design allows for maximum installation flexibility using
either a direct tubing connection or a radial seal for manifold assemblies.
Valve Type: Power:

Leak Rate:
2-Way, 2 Position, NO (NIBP) 0.5 Watt (2-Way, NO Model)
<0.016 sccm (bubble tight)
Media: Voltage:
Response:
Non-Reactive Gases 5, 12, 24 VDC
<5 msec on time
Operating Environment: Electrical Connections:
Pressure:
0 to 50°C PC Pins, 6 mm centers (all models)
0 to 6 psig
Operating Coil Temp: Max 85°C
Minimum Flow:
Storage Temperature: Wetted Materials 8 lpm @ 6 psi
-40 to 70°C LCP (Liquid Crystal Polymer); Orifice Sizes/Equivalent Cv:
Length: 430 Series Stainless Steel; 0.060"/0.032 Cv
32 mm (1.25 in) 302 Series Stainless Steel/
Width: Nickel-Plated Silicone Elastomer
9.9 mm (0.390 in)
Height:
12 mm (0.475 in)
Spacing:
10 mm (centerline)
Porting:
Barb fitting for 0.078" I.D. Polyurethane
tubing
Manifold mount with Ten-X seal
Weight:
0.39 oz (11 grams)
Internal Volume:
0.131 cm3 (0.0080 in3)
Ten-X is a registered trademark of Parker Hannifin Corporation.

VALVES TEN-X
Miniature Valves
Flow Dimensions
Pressure Decay
Sample Part ID 914 _ 1 1 1 05 1 _ 000

Description Series _ Elastomer Type Model Voltage Electrical _ Optional Accessories
Connection
1: Silicon 1: 2-Way NO No: Pressure/Orifice/Coil Wattage 05: 5 VDC 1: Short Pin 000: No Accessories
(NIBP Only) 1: 0-6 psi/0.060"/0.5 Watt
12: 12 VDC 2: Long Pin Accessories may be
Options 24: 24 VDC ordered separately at no
extra charge:
Screw:191-000112-010
Gasket: 195-000211-001
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us
on the Web, or call and refer to Performance Spec. #790-002213-001 and Drawing #890-003150-001.

VALVES SERIES 11, 25, & 26
PC Mount Digital Solenoid Valve

Miniature Valves
Series 11, 25, 26

Series 11, 25, and 26 PC Mountable Solenoid Valves convert a digital electrical
signal into a digital pneumatic output. The patented miniature design is
preferred by medical and analytical OEMs worldwide and allows valves to
be soldered directly onto a printed circuit board, providing both electrical
termination and mechanical attachment. These valves power small cylinders
directly or can be used to pilot larger valves that require high flow.
Features
✦ Offer a discrete valve design with a 200 million life cycle rating.
✦ Available in manifold mounting.
✦ Provide a range of electrical coil options, including PC mountable, spade
lugs, or wire leads.
✦ Powerful enough for a range of uses that require high flow.

Power:
Valve Type: 0.5, 1.0, or 2.0 Watts Leak Rate:
2-Way or 3-Way, 2 Position <0.016 sccm (bubble tight)
Voltage:
(NO, NC, & Distributor) Response:
5, 12, 24 VDC + 10%
Media: <30 msec cycling (2 Watts)
Gases and select liquids Pressure:
Wetted Materials
Operating Environment: 0 to 100 psig (0.030" orifice)
0 to 70°C Body: 0 to 70 psig (0.050" orifice)
Storage Temperature: 360 HO2 Brass; 302 Series Vacuum:
-40 to 70°C Stainless Steel (passivated) 0-27 in Hg
Length: Stem Base: Orifice Sizes/Equivalent Cv:
1.73 in (43.94 mm) 385 HO2 Brass; 303 Series 0.030"/0.017 Cv
Stainless Steel (passivated) 0.050"/0.035 Cv
Width:
0.625 in (15.88 mm) All Others:
FKM; EPDM; 430 FR Series
Height: Stainless Steel (passivated);
0.67 in (17.02 mm) 302 Series Stainless Steel
Porting:
10-32 tapped ports, 1/16”, 5/64”, or Flow
1/8” Stem Barbs
Weight:
2.1 oz. (60 grams)
Internal Volume:
0.026 in3 (without fittings)
Filtration:
40 micron (recommended)
Lubrication:
None required

VALVES SERIES 11, 25, & 26
Miniature Valves
Dimensions
Sample Part ID 11 10 3 BV 12 P 7 7
Description Series Model Number Type Material Voltage Coil Type Pneumatic Pneumatic
Connection Body Connection Stem
11 No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC P: PC Mount, 4 PC Pins 0: No Barbs 0: Type 1/None
10: 0-100 psi/0.030"/2 Watts 2: 2-Way NO BV: Brass/FKM 12: 12 VDC F: Wire Leads, 18" No Term 6: 1/16" Barbs 6: 1/16" Barbs*
Options 12: 0-70 psi/0.050"/2 Watts 3: 3-Way NC or SV: Stainless Steel/FKM 24: 24 VDC 7: 5/64" Barbs 7: 5/64" Barbs
13: 0-50 psi/0.030"/1 Watt Distributor BE: Brass/EPDM 8: 1/8" Barbs 8: 1/8" Barbs
15: 0-25 psi/0.050"/1 Watt 4: 3-Way NO
16: 0-25 psi/0.030"/0.5 Watt Selection of stainless steel * 1/16" Barbs not
body may extend lead time available for 0.050"
18: 0-10 psi/0.050"/0.5 Watt
orifice valves
NOTE: Series 25 and Series 26 valves are no longer standard product. Consult factory for qualified opportunities.
Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on the Web,
or call and refer to Performance Spec. #790-002075-001 and Drawing #890-003016-001.

VALVES V2
Value Squared Digital Solenoid Valve

Miniature Valves
V2 Valve
The V 2 valve offers a unique plastic body, which provides an economical
solution without compromising on quality or reliability. Parker offers the
versatile V 2 in either a manifold mount design or with molded barbed fittings.
This PC and manifold mountable solenoid valve converts a digital electrical
signal into a digital pneumatic output.
Features
✦ Cost-effective, unique Polybutylene Terephthalate (PBT) body.
✦ Manifold mount design or molded barbed fittings to fit a range of needs.

Power:
Valve Type: 0.5, 1.0, or 2.0 Watts Leak Rate:
2-Way or 3-Way, 2 Position <0.2 sccm
Voltage:
(NO, NC, & Distributor) Response:
5, 12, 24 VDC + 10%
Non-Corrosive Gases Pressure:
Wetted Materials
0 to 70°C Body: 0 to 30 psig (0.050" orifice)
Storage Temperature: PBT Vacuum:
-40 to 70°C Stem Base: 0-27 in Hg
Length: 360 HO2 Brass Orifice Sizes/Equivalent Cv:
1.73 in (43.94 mm) All Others: 0.030"/0.017 Cv
Width: FKM; 430 FR Series Stainless Steel 0.050"/0.035 Cv
0.625 in (15.88 mm) (passivated); 302 Series Stainless
Steel; Loctite ® 290
Height:
0.67 in (17.02 mm)
Porting:
Barb fittings for 1/8" I.D. tubing Flow
or manifold mount
Weight:
1.2 oz (34.29 grams)
Internal Volume:
0.016 cm3 (nominal)
Filtration:
Lubrication:
None required
Loctite ® is a registered trademark of Henkel Consumer Adhesives, Inc.

VALVES V2
Miniature Valves
Dimensions
Sample Part ID V2 14 3 PV 12 P 8 8
Description Series Model Number Type Material Voltage Coil Type Body Styles Topseat Barbs
No: Pressure/Orifice/Coil Wattage 1: 2-Way NC XX: Body/Plunger & Seal 5: 5 VDC P: PC Mount, 4 PC Pins 0: Manifold 0: None (Type 1)
10: 0-100 psi/0.030"/2 Watts 3: 3-Way NC or PV: Plastic/FKM 12: 12 VDC F: Wire Leads, 18" 8: 1/8" Barbs 8: 1/8" Barbs
Options 13: 0-50 psi/0.030"/1 Watt Distributor 24: 24 VDC
14: 0-30 psi/0.050"/2 Watts 4: 3-Way NO
17: 0-15 psi/0.050"/1 Watt

20: 0-6 psi/0.050"/0.5 Watt

VALVES SRS
Manifold Mountable Plastic Solenoid Valve

Miniature Valves
SRS Valve
The 10mm SRS Series Plastic Solenoid Valve converts a digital electrical signal
into a digital pneumatic output. The SRS Valve is constructed of engineering
thermoplastics and non-corrosive metals to exceed the specifications demanded
by critical applications in the life sciences.
Features
✦ Design incorporates thermoplastics and non-corrosive metals.
✦ Offers high-density manifold mounting with convenient manifold to PC
board interface.
✦ Weighs only 0.23 ounces; perfect where low weight is critical to overall system.

Power:
Valve Type: Leak Rate:
0.5, 1.0, or 2.0 Watts
3-Way, 2 Position <0.016 sccm (bubble tight)
(NO, NC, & Distributor) Voltage:
Response:
5, 12, 24 VDC + 10%
Gases and select liquids Pressure:
Wetted Materials
0 to 55°C Crystalline Plastics: 0 to 50 psig (0.030" orifice)
Storage Temperature: PBT; LNP Thermocomp® 0 to 20 psig (0.045" orifice)
-40 to 70°C Elastomers: Vacuum:
Length: FKM 0-27 in Hg
1.5 in (38.1 mm) Non-Corrosive Metals: Orifice Sizes/Equivalent Cv:
Width: 302 Series Stainless Steel; 430 FR 0.020"/0.0075 Cv
0.394 in (10 mm) Series Stainless Steel; CMI-B Core 0.030"/0.017 Cv
Iron; Electroless Nickel Plating 0.045"/0.027 Cv
Height:
0.61 in (15.49 mm)
Porting:
Manifold mount; Gasket and
screws supplied
Weight: Flow
.23 oz (6.57 grams)
Internal Volume:
0.0267 cm3
Filtration:
Lubrication:
None required
Thermocomp® is a registered trademark of General Electric Company.

VALVES SRS
Miniature Valves
Dimensions
Sample Part ID SRS 10 2 P V 12 M
Description Series Model Number Type Material Seal Material Voltage Electrical Connection
No: Pressure/Orifice/Coil Wattage 1: 3-Way NC P: Engineering Plastic V: FKM 5: 5 VDC F: 0.025" Square Pins, Front
10: 0-35 psi/0.020"/0.5 Watt 2: 3-Way NO 12: 12 VDC
M: 0.025" Square Pins,
Options 11: 0-85 psi/0.020"/1 Watt 3: Distributor 24: 24 VDC Manifold Interface
13: 0-20 psi/0.030"/0.5 Watt
L: Insulated Wire Leads,
14: 0-50 psi/0.030"/1 Watt 18", Front
16: 0-10 psi/0.045"/0.5 Watt
17: 0-20 psi/0.045"1 Watt

Rev 1.5
VALVES MD PRO
Non-Thermally Compensated Proportional Valve

Miniature Valves
MD PRO
The MD PRO is a miniature solenoid-operated proportional valve that provides
application-specific OEM solutions.
Features
✦ Offers automated calibration.
✦ Provides repeatability across its operating range.
✦ Offers a superior combination of value and performance.
✦ Rated for 10 million life cycles.

Power:
2.0 Watts maximum
2-Way Normally Closed <0.22 sccm of air (bubble tight)
Voltage:
Media: Response:
See Coil Selection under
Air, argon, helium, hydrogen, <30 msec cycling
methane, nitrogen, oxygen, & others Pressure:
Operating Environment: 0 to 100 psig (See Ordering Info.)
0 to 60°C Vacuum:
Storage Temperature: 0-27 in Hg
-40 to 70°C Orifice Sizes: (See Ordering Info.)
Length: 0.040" (1.02 mm)
1.785 in (45.34 mm) 0.050" (1.27 mm)
Width: 0.065" (1.65 mm)
0.625 in (16.51 mm)
Height:
0.67 in (17.02 mm)
Flow
Porting:
1/8” barbs; manifold mount with
43 micron screen
Weight:
2.2 oz (62.86 grams)
Internal Volume:
0.031 in3 (.508 sccm)
Filtration:
43 micron
Lubrication:
None required
Oxygen Clean:
Available

VALVES MD PRO
Miniature Valves
Dimensions
Sample Part ID MDPRO 4 V A F 8 S

Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning
#: Max. Operating Pressure/Orifice Size V: FKM X: Max Voltage/Resistance/Current* F: Wire Leads, 18" 1: Manifold Mount with S: Standard
Screen* Cleaning
A: 5.5 VDC/11 ohms/0.304 amps P: PC Board Mount
Options 4: 75 psid/0.040" B: 8 VDC/23 ohms/0.212 amps 8: 1/8" Barbs O: Oxygen Service*
5: 100 psid/0.050" C: 11.5 VDC/47 ohms/0.152 amps
6: 50 psid/0.065" D: 13.5 VDC/68 ohms/0.125 amps * 43 Micron Screen *Selection of this
(Port 2) option affects the
E: 20 VDC/136 ohms/0.091 amps
valve price; contact
F: 29 VDC/274 ohms/0.066 amps factory for details
* Max Voltage for continuous full flow,

ambient temperature 55°C
Coil Resistance for Room Temp

Input Current for Full Flow
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit us on
the Web, or call and refer to Performance Spec. #790-002206-001 and Drawing #890-003022-001.

VALVES HF PRO
High Flow Standard Performance Proportional Valve

Miniature Valves
HF PRO
The High Flow MDPro controls the flow of gas proportionally to input
current. The valve may be driven with DC current or Pulse Width Modulation.
HF Pro achieves optimal system performance when it uses closed loop feedback.
Features
✦ Capable of 60 lpm flow and pressures up to 50 psig
✦ Face seal manifold mount or 5mm barbed body options
✦ Proven performance to 35 million life cycles
✦ Non-thermally compensated proportional valve

Power:
2.25 Watt nominal at 68° F (20°C)
2-Way Normally Closed 0.5 SCCM Max. N2 at 1 and 10 psid*
3 Watt max
Media: Response:
Voltage:
Air, argon, helium, hydrogen, <30 msec cycling
See Coil Selection under
Operating Environment: 0 to 50 psig
0 to 50°C Vacuum:
-40 to 70°C Effective Orifice Size:
Length: 0.070" (1.8mm)
1.785 in (45.34 mm)
* Low differential pressure represents the
Width: worst case condition due to the reverse
0.625 in (16.51 mm) flow (pressure-assist) nature of the valve.
Height:
0.67 in (17.02 mm)
Flow
Porting:
Manifold Mount; Barbed body
[5 mm (0.195”) ID Tube] HF Pro Typical Flow Media: Nitrogen
Coil: 68 Ohm
60
Weight:
2.2 oz (62.86 grams) 10 psi
50 20 psi
Internal Volume: 30 psi
Flow Rate (slpm)
0.031 in3 (.508 sccm) 40

40 psi
50 psi
Filtration:
43 micron 30
Lubrication:
None required 20
Oxygen Clean
10
0
0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175
Current (Amps)

VALVES HF PRO
Miniature Valves
Dimensions
Barbed Body Option
Manifold Mount Option
Sample Part ID HFPRO 7 V A F 8 O

Description Series Model Number Elastomer Coil Selection Electrical Interface Pneumatic Interface Cleaning
#: Max. Operating Pressure/Orifice Size V: FKM X: Max Voltage/Resistance/Current* F: Wire Leads, 18" 1: Manifold Mount O: Oxygen Service
7: 50 psid A: 5.5 VDC/11 ohms/0.304 amps 8: Barbed Body

Options D: 13.5 VDC/68 ohms/0.125 amps
F: 29 VDC/274 ohms/0.066 amps

NOTE: Please consult Parker Pneutronics for other considerations. For more detailed information, visit us on the Web, or call
and refer to Performance Spec. #790-002243-001 and Drawing #890-003191-001 (Manifold) or #890-003192-001 (Barbed).
For more information, call us at 1-603-595-1500

VALVES VSO
Normally Closed Proportional Solenoid Valve

Miniature Valves
VSO ®
The VSO®, Voltage Sensitive Orifice, is a miniature solenoid valve that controls
the flow of gas in proportion to input current. You can drive the valve with either
DC current or pulse width modulation and use closed loop feedback to deliver
optimal system performance. Medical and analytical OEMs worldwide choose
VSO as their preferred miniature proportional valve.
Features
✦ Offers operating pressure up to 150 psig and a range of orifice sizes.
✦ Satisfies a 0.2 sccm leakage specification of He for 100 million life cycles
and offers high repeatability.
✦ Provides computer-automated calibrations and full calibration traceability.
✦ Uses either DC current or pulse width modulation with closed loop
feedback to deliver optimal system performance.
✦ Maintains ideal flow through thermal compensation.

Power:
2.0 Watts maximum
2-Way Normally Closed < 0.2 sccm of helium (bubble tight)
Voltage:
Media: Response:
See Coil Selection under Ordering
Air, argon, helium, hydrogen, <30 msec cycling (2 Watts)
Information
Oxygen and analytically clean:
Operating Environment: 0 to 150 psig
Standard
0 to 55°C Vacuum:
-40 to 70°C Orifice Sizes: (See Ordering Info.)
Length: 0.010" (0.245 mm)
1.785 in (45.34 mm) 0.020" (0.510 mm)
Width: 0.030" (0.762 mm)
0.625 in (16.51 mm) 0.050" (1.270 mm)
0.065" (1.651 mm)
Height:
0.67 in (17.02 mm)
Flow
Porting:
Barbs or 10-32 female; manifold
mount with screens
Weight:
2.2 oz (62.86 grams)
Internal Volume:
0.031 in3 (.508 sccm)
Filtration:
Types 1 & 2: 17 micron
Types 3, 4, 5, & 6: 40 micron
Lubrication:
None required
Oxygen Clean:
Available
VSO is a registered trademark of Parker Hannifin Corporation.

VALVES VSO
Miniature Valves
Dimensions
Sample Part ID VSONC 1 S 11 V A F 8
Description Standard Model Number Series Body Series Elastomer Coil Selection Electrical Interface Pneumatic Interface
(Series 11 only except
with Option 5)
#: Max. Operating Pressure/Orifice 11: Series 11 V: FKM/Brass X: Max Voltage/Resistance/Current* F: Wire Leads, 18" 0: Manifold Mount
25: Series 25 C: FFKM*/Brass P: PC Board Mount, 1: Manifold Mount with
1: 150 psid/0.010" A: 5.5 VDC/11 ohms/0.304 amps
(available in 4 PC Pins Screens* (this option will
Options I: FKM/Stainless Steel
2: 150 psid/0.020" nickel-plated B: 8 VDC/23 ohms/0.212 amps affect price)
brass only) H: FFKM*/Stainless Steel
3: 150 psid/0.030" C: 11.5 VDC/47 ohms/0.152 amps
5: 10-32 Threaded
4: 75 psid/0.040" D: 13.5 VDC/68 ohms/0.125 amps
*Selection of this option affects Female (Series 25)
5: 100 psid/0.050" E: 20 VDC/136 ohms/0.091 amps
the valve price; consult factory 8: 1/8" Barbs
6: 50 psid/0.065" for details F: 29 VDC/274 ohms/0.066 amps



VALVES VSO LOW FLOW
Normally Closed Proportional Solenoid Valve

Miniature Valves
VSO ® Low Flow

The VSO ® LF (Low Flow) offers the same benefits as the VSO ® valve with
enhanced flow control for applications where control is critical or flow is
required below 600 sccm. This miniature solenoid-operated valve automates
the flow of gas in proportion to the input current.
Features
✦ Uses either DC current or pulse width modulation; closed loop feedback
delivers optimal system performance.
✦ Offers computer automated calibrations and full calibration traceability.
✦ Rated for 10 million life cycles.
✦ Maintains ideal flow through thermal compensation.
✦ Highly repeatable.

Power:
2.0 Watts maximum
2-Way Normally Closed <0.2 sccm of helium (bubble tight)
Voltage:
Media: Response:
See Coil Selection under Ordering
Air, argon, helium, hydrogen, methane, <15 msec cycling
Information
nitrogen, oxygen, & others Orifice Sizes: (See Ordering Info.)
Oxygen and analytically clean:
Operating Environment: 0.003" (0.076 mm)
Standard
0 to 55°C
-40 to 70°C
Length:
1.785 in (45.34 mm)
Width: Flow
0.625 in (16.51 mm)
Height:
0.67 in (17.02 mm)
Porting:
Manifold mount with 17 micron screens
Weight:
2.2 oz (62.86 grams)
Internal Volume:
0.031 in3 (.508 sccm)
Filtration:
17 micron
Lubrication:
None required
Oxygen Clean:
Available

VALVES VSO LOW FLOW
Miniature Valves
Dimensions
Sample Part ID 910 _ 000200 _ 001
Description Series _ Model Number _ Coil Selection
VSO, Low Flow, 0.003" orifice size X: Max Voltage/Resistance/Current*

001: 6.5 VDC/47 ohms/0.152 amps
Options 002: 8 VDC/68 ohms/0.115 amps
003: 12 VDC/136 ohms/0.080 amps
004: 18 VDC/274 ohms/0.060 amps
* Max Voltage for continuous full flow, ambient Temp 55°C,
Coil Resistance for Room Temp, Input Current for Full Flow
NOTE: Please consult Parker Life Sciences for other considerations. For more detailed information, visit
us on the Web, or call and refer to Performance Spec. #790-002160-002 and Drawing #890-003022-022.

VALVES LONE WOLF
Normally Open Proportional Valve

Miniature Valves
Lone Wolf
With its patented technology, the Lone Wolf valve has the highest performance
characteristics of any Normally Open proportional valve available on the
market. This VSO ® valve offers silent operation, provides repeatable high-speed
performance, and ensures maximum accuracy.
Features
✦ Achieves rapid, stable performance.
✦ Enhances system control and patient comfort.
✦ Maintains ideal flow through Normally Open valve with thermal compensation.
✦ Extremely reliable.

Power/Orifice Sizes:
0.5 Watt/0.024"
2-Way Normally Open Internal: 0.2 sccm (bubble tight)
1.0 Watt/0.030"
Media: External: 0.016 sccm
2.0 Watts/0.036"
Air, nitrogen, oxygen, & others Response:
Voltage:
Operating Environment: <30 msec cycling (2 Watts)
3 to 60 VDC
0 to 50°C Pressure:
Electrical Terminal:
Storage Temperature: 25 psig maximum (10 psid)
PC Mount, Spade Lugs,
-40 to 70°C 18” Wire Leads Vacuum:
Length: 0-20 in Hg
1.785 in (45.34 mm)
Width:
0.625 in (16.51 mm)
Flow
Height:
0.67 in (17.02 mm)
Porting:
Manifold mount with 43 micron
screens, 1/8" Barbs, 5/64" Barbs
Weight:
2.2 oz (62.86 grams)
Internal Volume:
0.031 in3 (.508 sccm)
Filtration:
40 micron
Lubrication:
None required

VALVES LONE WOLF
Miniature Valves
Dimensions
Sample Part ID LW 1 B V A F 8
Description Series Model Number Material Elastomer Coil Resistance Electrical Interface Pneumatic Interface
No: Pressure/Orifice*/Coil Wattage B: Brass V: FKM A: 11 ohms F: Wire Leads, 18"-19" 0: Manifold Mount
B: 23 ohms P: PC Board Mount, 4 PC Pins 1: Manifold Mount with
Screens* (this option
Options 1: 0-10 psi/0.024"/0.5 Watt C: 47 ohms
will affect price)
2: 0-20 psi/0.030"/1 Watt D: 68 ohms
8: 1/8" Barbs
3: 0-25 psi/0.036"/2 Watt F: 274 ohms
*Median Effective Orifice

EPC VSO-EP
Electronic Pressure Control Unit

Electronic Pressure Control
VSO-EP ™
The VSO-EP™ Electronic Pressure Control Unit converts a variable electrical
control signal into a variable pneumatic output. Used to control critical pressure,
the VSO-EP replaces manual regulators, needle valves, flow controllers, and
bleed orifices, providing integral closed loop proportional control. This product
uses Pneutronics’ patented VSO® proportional valve and offers significant
improvements over dual valve controllers. VSO-EP is used for carrier gas flow
control, microfluidic flow control, vacuum pump control, and for aspirate /
dispense applications.
Features
✦ Offers silent operation.
✦ Ensures high accuracy and unparalleled resolution.
✦ Tested for long life.
✦ Offers internal closed loop control and external pressure sensor capability*.
✦ OEM application-specific configurations available.
*Accessories Required

Power:
Valve Technology: Pressure Ranges:
24 VDC + 10%
Thermally compensated 0-15 psig
proportional valve Input Control Signal: 0-30 psig
0-5 VDC standard 0-50 psig
Media:
4-20 mA available 0-100 psig
Non-corrosive gases
Monitor Output Voltage: Pressure Accuracy:
Operating Environment:
0-5 volts + 0.2% FS typical
0 to 55°C
Current Requirement: + 1.5% FS max
<150 mA Response:
-40 to 55°C
Electrical Connector: <15 msec
Length:
RJ-45 (Response time to target pressure
2.25 in (57.15 mm)
is output volume dependent)
Width:
Linearity:
2.25 in (57.15 mm)
< +1.0% FS
Height:
Maximum Supply Pressure:
1.25 in (31.75 mm)
150% of pressure transducer rating
Porting:
10-32 female ports
VSO is a registered trademark and VSO EP is a trademark of Parker Hannifin Corporation.

www.parker.com/lifesciences
EPC VSO-EP

Drawing
Configurations
Custom configurations are available.

Contact factory for details.
Sample Part ID VSO-EP SC 0-5 0-100 CAT 5e Plug-in (RJ-45) Connector (included)
Description Series Configuration Electrical Input Pneumatic Range
Signal RJ-45 Pin # Color
SC: Standard Pressure Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, Main Power, 24 VDC 1 White w/ Orange
70, 100 (psi)
AC: Head Pressure Controller
Input Control
Options Signal, 0-5 VDC 2 Solid Orange
Monitor Signal
Output, 0-5 VDC 3 White w/ Green
NOTE: Please consult Parker Life Sciences for other considerations. For more System Ground 4 Solid Blue
detailed information, visit us on the Web, or call and refer to Performance
Spec. #790-002202-001 and Drawing #890-003146-001.

Rev 1.5
EPC VSO-EV
Vacuum Control Module

VSO-EV™
The VSO-EV™ is a pressure controller specifically configured and optimized
for vacuum pressure control. The VSO-EV converts a variable electrical
control signal into a closed-loop, tightly regulated pneumatic output. Often
used for aspirating liquid samples in gas-over-liquid flow control, as well as
for pipetting and dispensing nano-liter volumes, the VSO-EV offers users
a choice of either an external transducer or an internal sensor to close the
control loop around critical system parameters. This EPC is well suited for
high precision automated laboratory instruments, meeting the most stringent
separation and detection requirements.
Features
✦ Low weight and low power consumption
✦ Ensures high accuracy and unparalleled resolution.
✦ Tested for long life.
✦ Offers internal closed loop control and external pressure sensor capability*.
✦ OEM application-specific configurations available.
*Accessories Required

Power:
Valve Technology: Vacuum Ranges:
24 VDC + 10%
Thermally compensated 0-345 mBar
proportional valve Input Control Signal: Custom units available
0-5 VDC standard
Media: Pressure Accuracy:
4-20 mA available
Non-corrosive gases + 0.2% FS typical
Monitor Output Voltage: + 1.5% FS max
0-5 volts
0 to 55°C Response:
Current Requirement: <15 msec
<150 mA (Response time to target pressure
-40 to 55°C
Electrical Connector: is output volume dependent)
Length:
RJ-45 Linearity:
2.25 in (57.15 mm)
< +1.0% FS
Width:
2.25 in (57.15 mm) Maximum Supply Pressure:
Height:
1.25 in (31.75 mm)
Porting:
10-32 female ports
VSO is a registered trademark and VSO EV is a trademark of Parker Hannifin Corporation.

EPC VSO-EV

Drawing
Configurations

Sample Part ID VSO-EV EV 0-5 0-VAC CAT 5e Plug-in (RJ-45) Connector (included)
EV: Vacuum Controller 0-5: 0-5 VDC 0-VAC: 0-VAC* Main Power, 24 VDC 1 White w/ Orange
* 0 to -345 mBar for
vacuum; Consult factory Input Control
Options for custom options Signal, 0-5 VDC 2 Solid Orange
Monitor Signal
NOTE: Please consult Parker Life Sciences for other considerations. For more System Ground 4 Solid Blue
detailed information, visit us on the Web, or call and refer to Performance
Spec. #790-002202-001 and Drawing #890-003146-001.

Rev 1.5
EPC OEM-EP
Miniature Pressure Control Module

OEM-EP
Measuring just 26mm x 27mm x 60mm, the OEM-EP (Electronic Pressure
Control Unit) is the smallest electronic pressure controller available on the
market, configured specifically for the analytical instrumentation and life
science OEM markets.
The OEM-EP can be configured to control pressure or flow and can replace
manual regulators, flow controllers, and needle valves, providing integral
closed loop proportional control for sensitive instrumentation applications.
This product uses Parker's patented VSO® proportional valve, as well as the
proven circuitry of its successful larger products.
Typical applications include:
✦ Carrier gas flow control ✦ Gas over liquid flow control
✦ Microfluidic flow control ✦ Liquid dispensing
✦ Hydro-dynamic focusing
Features
✦ Silent operation
✦ Long life
✦ High accuracy
✦ Low power consumption
✦ “Set and Forget” closed loop control

Main Power:
24 VDC + 10%
Media:
Non-corrosive gases Monitor Output Voltage: 0-100 psig
0-5 volts Pressure Accuracy:
0 to 55°C Current Requirement: + 0.2% FS typical
<150 mA + 1.5% FS max
-40 to 55°C Electrical Connector: Response:
6 pin miniature interface cable <15 msec
Length:
included (Response time to target pressure
1.02 in (26 mm)
Width:
Linearity:
1.06 in (27 mm)
< +1.0% FS
Height:
2.36 in (60 mm)
Porting:
10-32 female ports

EPC OEM-EP

Drawing
Configurations

Sample Part ID OEM-EP SC 0-5 0-100

SC: Standard Pressure Configuration 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50,
70, 100 (psi)
Options
NOTE: Please consult Parker Life Sciences for other considerations.

For more detailed information, visit us on the Web.

Rev 1.5
EPC VSO-GC
Gas Chromatography Flow Control Module

VSO-GC
The VSO-GC, Electronic Pressure Control (EPC) Unit, converts a variable
electrical control signal into a variable pneumatic output. By providing integral
closed loop control, it replaces manual regulators, costly multiple function
control valves, and needle valves. This product uses Parker Hannifin's patented
VSOTM proportional valve and offers application-specific integrated pneumatic
pressure control for Gas Chromatography (GC) applications.

✦ Column Head Pressure Control
✦ Split Flow Control
✦ Carrier Gas Flow Control
Features
✦ Silent operation
✦ Long life
✦ High accuracy
✦ Unparalleled resolution
✦ GC-specific proportional valve
✦ Internal closed loop control
✦ Pressure signal output

Power:
24 VDC + 10%
Media:
4-20 mA available 0-100 psig
Non-corrosive gases
Monitor Output Voltage: Pressure Accuracy:
0-5 volts + 0.2% FS typical
0 to 55°C
Current Requirement: + 1.5% FS max
<150 mA Response:
-40 to 55°C
Electrical Connector: <15 msec
Length:
RJ-45 (Response time to target pressure
2.25 in (57.15 mm)
Width:
Linearity:
2.25 in (57.15 mm)
< +1.0% FS
Height:
1.25 in (31.75 mm)
Porting:
10-32 female ports

EPC VSO-GC

Drawing
Configurations
VSO-GC Block Diagram Representation

Schematic diagram of VSO-GC
Sample Part ID VSO-GC AC 0-5 0-100* CAT 5e Plug-in (RJ-45) Connector (included)
SF: Split Flow Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50, Main Power, 24 VDC 1 White w/ Orange
70, 100 (psi)
Input Control
Options Signal, 0-5 VDC 2 Solid Orange
NOTE: Split Flow Controller * Not required for SF
accommodates varying inlet pressures. Monitor Signal
NOTE: Please consult Parker Life Sciences for other considerations. System Ground 4 Solid Blue
NOTE: Valve sizes are optimized for use in Gas Chromatography applications.
Customs performance readily available; consult factory for options. CAT 5e cable included.

Rev 1.5
EPC VSO-HP
High Performance Pressure Controller

VSO-HP
Used in analytical and OEM instrument applications, the VSO-HP delivers
integral closed loop proportional control with the highest level of accuracy
and stability. This miniature controller, measuring only 39 x 42 x 71 mm, works
ideally in High Performance Liquid Chromatography (HPLC) applications,
eliminating time-consuming temperature and pressure adjustments through
its superior design and performance.
The VSO-HP ensures stable flow levels with features such as monitor voltage
feedback and an LED display for pressure regulation. It also offers rapid
depressurization, which results in a fast response time and has an optional
external sensor for expertly controlling pressure in required applications.
The VSO-HP can be configured to control pressure or flow, replacing manual
regulators, flow controllers, and needle valves. This product uses Parker's
patented VSO® proportional valve and offers precise motion control with
Parker pneumatic cylinders, such as the Series SRX.
✦ Carrier gas flow control ✦ Gas over liquid flow control
✦ Hydro-dynamic focusing ✦ Microfluidic flow control
✦ Liquid dispensing
Features
✦ Stable pressure control with ✦ Configurable for pressure control
minimal thermal drift or flow control
✦ Rapid depressurization ✦ External pressure sensor capability
✦ High accuracy; high repeatability ✦ Silent operation; long life
✦ Low power consumption
✦ Optional 5 VDC supply output

Main Power:
24 VDC + 10%
proportional valve; digital dump valve Input Control Signal: 0-30 psig
Media:
Non-corrosive gases Monitor Output Voltage: 0-100 psig
0-5 volts Pressure Accuracy:
0 to 55°C Current Requirement: + 0.2% FS typical
<250 mA + 1.0% FS max
-40 to 55°C Electrical Connector: Response:
6 pin miniature interface cable <15 msec
Length:
included (Response time to target pressure
1.52 in (39 mm)
Width:
Linearity:
1.66 in (42 mm)
< +1.0% FS
Height:
2.79 in (71 mm)
Porting:
10-32 female ports

EPC VSO-HP

Drawing
Configurations
Application
VSO
Valve Bleed Pressure
Orifice Sensor
atm Custom configurations are available.

S-11
Valve
0-5 VDC pressure

monitor output
Sample Part ID VSO-HP SC 0-5 0-100

SC: Standard Pressure Controller 0-5: 0-5 VDC 0-2, 5, 7, 15, 30, 50,
70, 100 (psi)
Options


Rev 1.5
VALVES PND
Pneutronics New Dump Valve

Miniature Valves
PND Series
The PND Series is a miniature, low cost, application-specific, two-way
Normally Open exhaust or "dump" valve. Perfect for safety-oriented
applications that require pressure relief to atmosphere upon power loss.
Features
✦ Normally Open exhaust valve in a small package size.
✦ Works well in miniature applications such as in Non-Invasive Blood
Pressure (NIBP) devices.
✦ Provides small size and low cost.
✦ Offers low holding voltage.

Power: Leak Rate:
Valve Type:
0.5 Watt or less 0.016 sccm (bubble tight)
2-Way Normally Open
Voltage: Response:
Media:
3, 6, 12 VDC
Non-corrosive gases <100 msec cycling
Operating Environment: Pressure:
Wetted Materials
0 to 45°C 0 to 6 psig holding
Storage Temperature: Elastomer: Vacuum:
-25 to 70°C Silicon; Nickel-Plated Steel 0-27 in Hg
Length: Frame: Orifice Sizes/Equivalent Cv:
1.01 in (25.6 mm) SPCC (Treatment: MFZn2-c) 0.030"/0.017 Cv
Width: All Other: 0.050"/0.035 Cv
0.394 in (10 mm) Polybutylene Terephthalate (PBT); Larger sizes available in
304 Series Stainless Steel 15 mm frame
Height:
0.472 in (12 mm)
Porting:
1 port, 0.118" (3 mm) O.D.; suitable Ordering Information
for 0.078 I.D.; Urethane tubing
Sample Part ID PND _ 05 A _ 12
Weight:
Description Series _ Watts (Rated Orifice Size _ Voltage
.27 oz (7.71 grams) Power at 20°C)
Internal Volume: 05: 0.5 Watt D: 0.030" 03: 3 VDC
0.026 cm3 A: 0.050" 06: 6 VDC
Options 12: 12 VDC
Filtration:
Note: With Orifice
None required Size at 0.050", the
frame width and
Lubrication: height increases
None required 0.118" (3mm)

For more detailed information, visit us on the Web, or call and refer to
Performance Spec. #790-002198-001 and Drawing #s: PND-05A-DWG
and PND-05D-DWG.

VALVES PND
Miniature Valves
Dimensions

VALVES B SERIES
General Purpose 2-Way Direct Acting Valves

Miniature Valves
B Series
The small stainless steel B Series valves convert electrical signal to control
media flow. Available as Normally Closed (B2) and Normally Open (B11), these
bubble tight valves are 100% tested and will perform consistently for up to
20 million cycles.
Features
✦ Multipoised; available in a range of mounting positions.
✦ Rated pressures up to 400 psi allow maximum control over gases and liquids.
✦ Available with 1/8" NPT ports for process connection and 18" lead wires for
electrical connection.
Physical Properties Electrical Standard Material Options

Power Consumption: Body: Series 303 Stainless Steel
Valve Type:
7 Watts Seals: NBR (Nitrile), FKM
Normally Open
Normally Closed Voltage: Sleeve: Series 304 Stainless Steel
DC: 12, 24
Pipe Size: Plunger: 430F FR Stainless Steel
AC: 24/60, 120/60, 240/60
1/8" NPT Stop: 430 FR Stainless Steel
Other voltages available upon
Orifice Diameters: Springs: Stainless Steel (18-8)
request
Normally Open
1/32", 3/64", 3/32" Coil Type: Shading Ring: Copper (AC only)
Class A Orifice: Series 303 Stainless Steel
Normally Closed
1/32", 3/64", 1/16", 1/8"
Valve Diameter: Performance Characteristics
1 in (25.4 mm)
Height: Operating Speed:
2.69 in (68.33mm) Up to 600 cycles per minute
Weight: Vacuum:
4.8 oz (137.14 grams) Up to 5 micron
Maximum Ambient Temperature
105°F
Universal Mounting Bracket:
B19006 Configurations
Filtration:
40 micron recommended
Lubrication:
None required, but will increase life
Compatible Fluids:
Lubricated air, non-lubricated air,
inert gases, water, hydraulic fluids,
petroleum products, and additional
fluids compatible with materials of
construction

VALVES B SERIES
Miniature Valves
Dimensions
NOTE: Universal Mounting Bracket B19006,

shown above, is a separately ordered item.
Sample Part ID B2 DA 1400
Description Series Coil Enclosure Max. Operating Pressure *When ordering, please state voltage.
Example: B2DA1250, 24 VDC
B2: 2-Way, Normally Closed, B2 B2
NBR Seals DA: Grommet 1400: 400 psi (AC/DC)
Options 1250: 250 psi (AC/DC)
B11: 2-Way, Normally Open, B11 1175: 175 psi (AC/DC)
FKM Seals
DK: Grommet 1052: 50 psi (AC)
1026: 25 psi (DC)
B11
1400: 400 psi (AC/DC)
1200: 200 psi (AC/DC)
1040: 40 psi (AC/DC)

VALVES B SERIES
General Purpose 3-Way Solenoid Valve

Miniature Valves
B Series
The three-way B Series valves are available in several configurations, includ-
ing Normally Closed and Normally Closed-Exhaust to Atmosphere (B13 and
B13A), Multipurpose (B14), Normally Open (B15), and Directional Control (B16).
Features
✦ Stainless steel body with high flow capacity.
✦ Available with 1/8" NPT ports.
✦ Can be used as two-way Normally Open or Normally Closed by plugging
one port.
✦ Multipurpose valves accept inlet pressure or vacuum at any port.

Power Consumption: Body: Series 303 Stainless Steel
Valve Type:
7 Watts Seals: NBR, FKM
Normally Open, Normally Closed,
Normally Closed - Exhaust to Voltage: Sleeve: Series 304 Stainless Steel
Atmosphere, Directional Control, DC: 12, 24
AC: 24/60, 120/60, 240/60 Plunger: 430F FR Stainless Steel
Multipurpose
Other voltages available upon Stop: 430 FR Stainless Steel
Pipe Size:
1/8" NPT request Springs: Stainless Steel (18-8)
Orifice Diameters: Coil Type: Shading Ring: Copper (AC only)
1/32", 3/64", 1/16", 3/32" Class B Orifice: Series 303 Stainless Steel
Valve Diameter:
1 in (25.4 mm) Performance Characteristics
Height:
2.26 in (57.4 mm) Operating Speed:
Weight: Up to 600 cycles per minute
4.8 oz (137.14 grams) Vacuum:
Maximum Ambient Temperature Up to 5 micron
105°F
Universal Mounting Bracket:
B19006 Configurations
Filtration:
Lubrication:
Compatible Fluids:
Lubricated air, non-lubricated air,
construction

VALVES B SERIES
Miniature Valves
Dimensions
Sample Part ID B13 DK 1175
Description Series Coil Enclosure Max. Operating Pressure
*When ordering, please state voltage.
B13: 3-Way, Normally Closed (NC) DK: Grommet B13 & B13A Example: B13DK1175, 120/60
B13A: 3-Way, NC, exhaust to 1200: 200 psi (AC/DC)
atmosphere
B14: 3-Way, Multipurpose 1100: 100 psi (AC/DC)
B15: 3-Way, Normally Open 1040: 40 psi (AC/DC) NOTE: Please consult Parker Life
B16: 3-Way, Directional Control B14
Sciences for other considerations.
1150: 150 psi (AC/DC)
1100: 100 psi (AC/DC)
1075: 75 psi (AC)
1030: 30 psi (DC)
B15
1200: 200 psi (AC/DC)
1150: 150 psi (AC/DC)
1125: 125 psi (AC/DC)
1040: 40 psi (AC/DC)
B16
1250: 250 psi (AC/DC)
1200: 200 psi (AC/DC)
1175: 175 psi (AC/DC)
1050: 50 psi (AC/DC)

VALVES C SERIES
General Purpose 2-Way Direct Acting Valves

Miniature Valves
C Series
The two-way Normally Closed C Series valves offer a soft synthetic plunger
insert with a precision-machined seat, which provides a tight seal with long
insert life. These valves are 100% tested and will perform consistently up to
20 million cycles.
Features
✦ Includes only two moving parts: the stainless steel spring and the plunger.
✦ Range of compatible media includes petroleum products and Freon ®.
✦ Up to 275 psi of operating pressure.
✦ Measures 2 5/16" in height and 12 oz in weight.
✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.

Power Consumption:
Valve Type: Operating Speed:
8 Watts
2-Way Normally Closed Up to 600 cycles per minute
Voltage:
Pipe Size: Response Time:
DC: 12, 24
1/8" NPT dry seal AC: 4-8 msec to open or close
AC: 24/60, 120/60, 240/60
Orifice Diameters: DC: 10-15 msec to open or close
Other voltages available upon
1/16", 7/64", 1/8", 5/32" Vacuum:
request
Valve Diameter: Down to 5 microns
Coil Enclosures: (0.005 Torr, 2 x 10-4 in Hg)
1.19 in (30.23 mm)
Grommet; 1/2” NPT Conduit
Height: Maximum Operating Pressure
2.31 in (58.67 mm) Differential
Standard Material Options Up to 275 psi
Weight:
12 oz with Conduit (342.86 grams) Body: Brass
11 oz with Grommet (314.29 grams) (Stainless Steel available)
Maximum Ambient Temperature Seals: NBR (FKM, and EPDM
105°F available upon request)
Universal Mounting Bracket: Sleeve: Series 304 Stainless Steel
MECHB5 Plunger: 430F FR Stainless Steel
Filtration: Stop: 430 FR Stainless Steel
Springs: Stainless Steel (18-8)
Lubrication:
Shading Ring: Copper (AC only)
Compatible Fluids:
Lubricated air, non-lubricated air, inert Configurations
gases, water, hydraulic fluids, petroleum
products, Freon ®, and additional fluids
compatible with materials of construction
Water over 180°F, Freon ®, and some
petroleum products may require seal
material modifications.
Freon ® is a registered trademark of E.I. du Pont de Nemours and Company.

VALVES C SERIES
Miniature Valves
Dimensions
NOTE: Universal Mounting Bracket MECHB5,

shown left, is a separately ordered item.
Sample Part ID C2 DA 1277

Example: C2DA1277, 12 vdc
C2: 2-Way, Normally Closed DA: Grommet 1277: 275 psi (AC)
DB: 1/2" Conduit 1251: 250 psi (DC)
Options 1132: 130 psi (AC)
1081: 81 psi (DC)
1092: 90 psi (AC)
1051: 50 psi (DC)
1062: 60 psi (AC)
1031: 30 psi (DC)

VALVES C SERIES
General Purpose 3-Way Direct Acting Valve

Miniature Valves
C Series
The three-way C Series valves, including C3 & C3A (Normally Closed and
Normally Closed-Exhaust to Atmosphere), C4 (Multipurpose) and C5
(Normally Open) convert electrical signal to controlled media flow. These
brass valves are available with 1/8" NPT ports for media connection and
18" lead wires for electrical connection.
Features
✦ Accommodates up to 175 psi of system pressure depending on flow
requirements.
✦ Tested to perform consistently for up to 20 million cycles.
✦ Valves are UL/CSA approved for all AC voltages with 1/2" conduit enclosure.

Power Consumption: Body: Brass
Valve Type:
7.5 Watts Sleeve: Series 300 Stainless Steel
Normally Open, Normally Closed,
Normally Closed - Exhaust to Voltage: Plunger: 430F FR Stainless Steel
Atmosphere, Multipurpose DC: 12, 24
AC: 24/60, 120/60, 240/60 Seals: NBR and FKM
Pipe Size:
Body Ports 1/8" NPT Other voltages available upon
Adapter 1/8" PTF request
Orifice Diameters:
1/16", 7/64", 1/8", 5/32" Performance Characteristics
Valve Diameter:
Operating Speed:
1.19 in (30.23 mm)
Up to 600 cycles per minute
Height:
Vacuum:
3.30 in (83.82 mm)
Down to 5 microns
Filtration:
Maximum Operating Pressure
Differential
Lubrication: Up to 175 psi
Compatible Fluids:
Lubricated air, non-lubricated air, Configurations
construction

VALVES C SERIES
Miniature Valves
Dimensions
Sample Part ID C3 DK 1175
Example: C3DK1175, 12 vdc
C3: 3-Way, Normally Closed (NC) DK: Grommet C3 & C3A
C3A: 3-Way, NC, exhaust to DM: 1/2" NPT Conduit 1175: 175 psi (AC/DC)
atmosphere
C4: 3-Way, Multipurpose 1075: 75 psi (AC/DC)
C5: 3-Way, Normally Open 1050: 50 psi (AC/DC)
C4
1150: 150 psi (AC/DC)
1075: 75 psi (AC/DC)
1050: 50 psi (AC)
1031: 30 psi (DC)
C5
1175: 175 psi (AC/DC)
1100: 100 psi (AC/DC)
1060: 60 psi (AC/DC)

VALVES 3000 SERIES
2-Way & 3-Way Direct Acting Valves

Miniature Valves
3000 Series
The 3000 Series two-way and three-way valves convert electrical signal to
control media flow. Available as Normally Open (Series 3121) or Normally
Closed (Series 3129), these small stainless steel or brass bubble tight
valves will perform consistently for up to 20 million cycles.
Features
✦ 2-Way: Rated for 800 psi for gases and liquids.
3-Way: Rated for 200 psi for gases and liquids.
✦ Available with 1/8" NPT ports or manifold mount for process connection
and either lead wires or tabs for electrical connection.
✦ UL and CSA component recognition.

Power Consumption: Body: Brass or Series 303 Stainless
Valve Type:
6 Watts Steel
2-Way: Normally Open, Normally Closed
7.5 Watts for 24/60 Seals: NBR, FKM, EPDM
3-Way: Normally Open, Normally Closed, 3 Watts
Multipurpose, Directional Control Sleeve: Series 300 Stainless Steel
Voltage:
Orifice Diameters: DC: 12, 24 Plunger: 430F FR Stainless Steel
Normally Open AC: 24/60-24/50, 110/50-120/60, Manifold Body: Aluminum
1/32", 3/64", 1/16", 5/64", 3/32" 220/50-240/60 Flux Plate: Plated Steel
Normally Closed 3-Way Connections: Housing: Plated Steel
1/32", 3/64", 1/16", 5/64", 3/32", 12" leads; 1/4"tab
Integrated Coil Encapsulant: Nylon
1/8", 5/32" 3-Way Coil Enclosure Options:
Valve Diameter: 1/2" Conduit; Grommet; Yoke; Performance Characteristics
1.02 in (25.91 mm) Integrated with tab connection;
Height: Integrated with 12" leads Operating Speed:
2.08 in (52.83) Up to 600 cycles per minute
Weight: Continuous Duty
8 oz (228.57 grams) Response Time:
Maximum Ambient Temperature 8-16 msec to open or close
68°F for continuous duty cycle Vacuum:
Mounting: Down to 5 microns depending
Standard: Two 8-32 tapped holes in on application
bottom of valve 3-Way Configurations
Optional: Universal mounting bracket
B19006 is available
Process Connections:
1/8" NPT
Manifold mount: cavity, screw-in
Filtration:
40 micron
Lubrication:
Compatible Fluids:
Air, Inert Gas, Water, Oil

VALVES 3000 SERIES
Miniature Valves
2-Way Configurations Dimensions
Sample Part ID 3 1 2 1 B B N1 A
Description Series Operations Type Flow Pattern Family Body Material Process Connection Orifice
(Pipe Size)
3000 1: Direct Acting, 2: 2-Way 1: Normally Closed B B: Brass (1/8” NPT only) A6: Male Straight Thread A: 1/32"
6 Watt (5/16"- 24 UNF)
3: 3-Way 3: Multipurpose J: Operator (No Body) E: 3/64"
Options 9: Direct Acting, 8: Directional S: 303 Stainless Steel A7: Male Straight Thread G: 1/16"
3 Watt (1/8” NPT only) (3/4"-32 UNF)
9: Normally Open, J: 5/64"
Ported Sleeve N1
1: Female National Pipe
1/8” L: 3/32"
N: 1/8"
Q: 5/32"
_ E 00 NO M1S1 P0
Series 3000 Part ID Continued _ Seal Material Mechanical Option Housing Coil Voltage
(20 characters total)

E: EPDM 00: None N0: No Housing M1S1: Integrated Molded, P0: 24/50-60 Hz AC
(Integrated Coil 1/4" Tab, 6W, Class B
N: NBR AD: 1/8" NPT P3: 110/50 Hz,
Only)
V: FKM Sleeve Adapter 120/60 Hz AC
M3J5: Integrated Molded,
(3-Way Only) RR: Grommet
12" Leads, 6W, Class B
(Taped Coil Only) Q3: 220/50 Hz,
C#: Aluminum, 240/60 Hz AC
Female 1/8" NPT, YY: Yoke M6J5: Integrated Molded,
2, 3, or 4 Station (Taped Coil Only) 12" Leads, 3W, Class B C1: 12 VDC
Cavity Manifold T1J1: Taped 12" Leads, 6W, C2: 24 VDC
Block Class B
HT: Helium Leak T3J1: Taped 12" Leads, 3W,
Tested Class B
N0: Cleaned for NOTE: For all 6W coils,
NOTE: Please consult Parker Life Oxygen Service actual wattage for 24/60
Sciences for other considerations. Voltage is 7.5

VALVES BP SERIES
Proportional 2-Way Valves

Miniature Valves
BP Series
The BP Series valve is an analog proportional device that digitally modulates
the current supplied to the coil. The mechanism that opens and closes the BP
valve's flow orifice moves in a linear manner in response to the varying coil
current and is easily controlled by a user input signal.
Features
✦ Offers longer valve life and consumes less power than similar
proportional valves.
✦ Eliminates pressure or flow spikes by using linear flow control.
✦ Provides faster response time.
✦ Offers simplified control systems.
✦ Versatile: multipoised valves allow mounting in any position.
Electrical Performance Characteristics

Power:
Response:
7 Watts maximum
Physical Properties Complete cycle, Off-Full, Open-Off:
Voltage: 40 msec cycling at zero pressure
12-24 VDC 100 msec cycling at max pressure
Valve Type:
2-Way, Normally Closed proportional Enclosure: Hysteresis:
General Purpose, NEMA 1 10% of full flow (in open loop
Orifice Diameters:
1/32", 3/64", 1/16", 5/64", 3/32" Coil Type: applications)
Class A Valve Repeatability:
Media:
All gases compatible with valve materials 5% when operating within Linear
Standard Material Options Control Range
Ambient: 14 to 122°F (-10 to 55°C) Valve Orientation:
Body: Stainless Steel
Multipoised: can be mounted in
Media: 0 to 180°F (-18 to 82°C) Seals: NBR, FKM any position
Length: Sleeve: Stainless Steel
3.31 in (84 mm)
Plunger: Stainless Steel
Width:
Stop: Stainless Steel
1.38 in (35 mm)
Springs: Stainless Steel
Height:
1.79 in (45.5 mm) Orifice: Stainless Steel
Porting:
1/8" NPT
Flow
BP Proportional Valve Flow Curve
Linear
(Y) Control
Range
Zero Offset Point

(point where flow begins) % Control Signal
typically between 30-40% of
control signal, depending on
(X)
actual system pressure

VALVES BP SERIES
Miniature Valves
Dimensions
Sample Part ID BP2EV0001
Description Series Orifice Size Cv Max. Operating Flow Ranges Control Input Signal OR External Control
Pressure
BP Flow at Maximum psi Flow at 10 psi 0-2V 0-5V 0-10V 4-20mA

1/32” 0.02 200 psi 0-50,000 sccm 0-8,000 sccm BP2EV0001 BP2EV0012 BP2EV0013 BP2EV0029 BP2DA1201
Options 1/16” 0.08 60 psi 0-75,000 sccm 0-30,000 sccm BP2EV0003 BP2EV0005 BP2EV0009 BP2EV0020 BP2DA1061
3/32” 0.16 25 psi Consult Factory BP2DA1026
NOTE: External control valves do not include electronics in valve number (only the coil is provided).
Please consult Parker Life Sciences for other considerations.

VALVES MANIFOLDS
Value-Added Products
Miniature Valves
Value Added
5 Position SRS Model Gassing Control System

Pneumatic Manifold
✦ Mixed pneumatic ✦ Mixed gassing

logic assembly logic design
✦ Pressed in barbed includes VSO ®
fittings proportional
valves, X-Valve ®,
pressure switch,
pressure sensors,
and PCB interface
10 Position X-Valve ® Vacuum Gas Control Module

Pneumatic Manifold
✦ Mixed pneumatic ✦ Tested to 1 x 10-7
logic design cc/sec/atm Helium
✦ Ultra-miniature ✦ Assembly tested
design with on mass
PCB for mass spectrometer
termination
5 Position SRS Model 14 Position X-Valve ®

Pneumatic Manifold Pneumatic Manifold
✦ Mixed pneumatic ✦ Integrated circuit

logic assembly board
✦ Integrated pressure ✦ Mass electrical
sensors termination
✦ Mass termination of ✦ Splash-proof vinyl
sensors & valves hood
✦ Pressed in barbed
fittings
VSO and X-Valve are registered trademarks of Parker Hannifin Corporation.

VALVES MANIFOLDS
Miniature Valves
4 Position V 2 Pneumatic Manifold 23 Station/Multiple Valve
Pneumatic Manifold
✦ Low cost solution ✦ Circuit board with
mass electrical
termination
✦ Multiple layer
manifold
✦ Integrated volume
chambers
7 Position X-Valve ® 6 Position VSO ® Proportional Valve

Pneumatic Manifold Pneumatic Manifold Assembly
✦ Integrated pressure/ ✦ Quick connect
vacuum sensors fittings
✦ Mixed pneumatic ✦ Circuit board with
logic design mass electrical
✦ Ultem ® manifold termination
pressure/vacuum
sensors
8 Position SRS Model 10 Position SRS Model

Pneumatic Manifold Pneumatic Manifold
✦ Integrated circuit ✦ Circuit board with
board mounting transducers
✦ Mass electrical ✦ Pressed in barbed
termination fittings
FOR OTHER MANIFOLD TECHNOLOGY OPTIONS, PLEASE CONTACT PARKER LIFE SCIENCES TODAY!
Ultem ® is a registered trademark of General Electric Company.


PNDValves_Catalog_PH

Uploaded by

Copyright:

Available Formats

PNDValves_Catalog_PH

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PNDValves_Catalog_PH

Uploaded by

Copyright:

Available Formats

Digital and Proportional

Parker Hannifin Corporation

8mm Universal Solenoid Valve

X-Valve® is a two-position, three-way universal solenoid valve, just 8mm in

Physical Properties Electrical Performance Characteristics

Parker Hanniﬁn Corporation

Miniature Solenoid Valves

To order, please call 1.603.595.1500

Parker Hanniﬁn Corporation

Inline Assembly/Diverter Assembly

Physical Properties Dimensions

Media: Inline Assembly

X-Valve is a registered trademark and X-System

Parker Hannifin Corporation

Sample Part ID 912 _ 000 6 02 _ 1 01

8: 3-Way NC (common supply to NC Port 1, common exhaust)*

Sample Part ID 912 _ 6 6 01 01 _ 6 01

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

10mm Solenoid Valve

Physical Properties Electrical Performance Characteristics

Valve Type: Power:

Ten-X is a registered trademark of Parker Hannifin Corporation.

Parker Hannifin Corporation

Sample Part ID 914 _ 1 1 1 05 1 _ 000

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

PC Mount Digital Solenoid Valve

Series 11, 25, 26

Physical Properties Electrical Performance Characteristics

Parker Hannifin Corporation

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

Value Squared Digital Solenoid Valve

Physical Properties Electrical Performance Characteristics

Loctite ® is a registered trademark of Henkel Consumer Adhesives, Inc.

Parker Hannifin Corporation

17: 0-15 psi/0.050"/1 Watt

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

Manifold Mountable Plastic Solenoid Valve

Physical Properties Electrical Performance Characteristics

Thermocomp® is a registered trademark of General Electric Company.

Parker Hannifin Corporation

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

Non-Thermally Compensated Proportional Valve

Physical Properties Electrical Performance Characteristics

Parker Hannifin Corporation

Sample Part ID MDPRO 4 V A F 8 S

* Max Voltage for continuous full flow,

Coil Resistance for Room Temp

For more information, call us toll-free at 1-800-525-2857

Parker Hannifin Corporation

High Flow Standard Performance Proportional Valve

Physical Properties Electrical Performance Characteristics

0.031 in3 (.508 sccm) 40

Parker Hannifin Corporation

Barbed Body Option

Manifold Mount Option