Strut Systems SS-13

Strut systems

Powering Business Worldwide

 SS-13

t systems

Powering business worldwide

As a gioba1 diversified power management company, we help customers
wor1dwide monage the power needed forbuildings, ai<raft, trucLs. cars,
machinery andbusneses.
Eaton‘s innovative technologies help customers manage elecnica1, hydrau1ic and
mecfianica1 power more m1iably, efficiently. safely and sustainably.
We deliver:
•
Electrical solutions that use less energy, improve power
reliability and make the places we live and work safer and more
comfortable
•
Hydraulic and electrical solutions that enable machines to
deliver more productivity without wasting power
•
Aerospace solutions that make aircraft lighter, safer and less
costly to operate, and help airports operate more efficiently
•
Vehicle drivetrain and powertrain solutions that
deliver more power to cars, trucks and buses, while reducing fuel
consumption and emissions

Eaton’s electrical business Eaton is positioned through its global solutio

critical electrical power management challen
Eaton is a global leader with expertise in:
experience behind us, we’re energized by th
•
Power distribution and circuit protection
world that demands twice as much energy a
•
Backup power protection
•
Solutions for harsh and hazardous environments needs, engineering products, and creating so
•
Lighting and security today and in the future.
•
Structural solutions and wiring devices We are dedicated to ensuring that reliable, e
•
Control and automation available when it’s needed most.
•
Engineering services Eaton.com
 We provide integrated solutions
that help make energy, in all its
forms, more practical and
accessible.
With 2012 sales of
$16.3 billion, Eaton has
approximately 103,000
employees around the world and
sells products in more than 175
countries.

hrough its global solutions to answer today’s most

wer management challenges. With 100 years of electrical
s, we’re energized by the challenge of powering up a
twice as much energy as today. We’re anticipating
products, and creating solutions to energize our markets
ure.
ensuring that reliable, efficient and safe power is
needed most.
 B-Line is a leading manufacturer and fabricator of steel and aluminum products which are used in sup
industrial, commercial, utility, and OEM installations. B-Line is proud of the exacting standards of rese
and manufacturing that go into each and every product that comprise our strut product line. Our cust
most complete support systems offered in the industry, including metal framing, cable tray, pipe han
fasteners.
Many of B-Line’s products are listed by the Underwriter’s Laboratories, Inc. All B-Line products are ma
exceed Metal Framing Manufacturers Association (MFMA) and other industry standards set for their de
Eaton’s B-Line Business 509 West Monroe Street Highland, Illinois 62249-0326
Phone: 800-851-7415

www.cooperbline.com Metal Framing Manufacturers Association

......................................................................... 2-
Introduction
Technical Data
Materials & Finishes 4-6
Welding & Corrosion 7-9
Design of Strut Systems & Recommended Specification 10-13
Channel & Combinations
Info. & Specifications & Selection Chart 14-15
B11 Channel 16-17
B12 Channel 18-19
B22, B24, B26 Channels 20-27
B32 Channel 28-29
B42 Channel 30-31
B52, B54, B56 Channels 32-37
Telescoping Channel 38-39
Channel Hole Patterns 40-42

Channel Nuts & Hardware

Info. & Specifications 44
Channel Nuts Selection Charts 45-49
Channel Nuts Slip & Pull-out Load Charts 50-51
Other Hardware 52-58
KwikWire™ & Accessories 59-70

Strut Fittings
Info. & Specifications 72
Flat Plate Fittings 73-75
90° Angle Fittings 76-81
Angular Fittings 82-84
Braces 85
Clevis Fittings 86
U-Fittings 87-90
Z-Fittings 91-93
Wing Fittings 94-96
Post Bases 97-98
Brackets 99-105
Miscellaneous Fittings 106-111

Beam Clamps & Accessories

 Info. & Specifications 112
Beam Clamps & Accessories 113-125
© 2013 B-Line
i
Pipe/Conduit Clamps & Hangers
Info. & Specifications 126
Pipe Clamps & Vibra Clamps 127-135
Armafix™ Clamps & Accessories 136
Vibra Cushions 137
Pipe Clamps, Hangers, & Brackets 138-145
Pipe Block & Rollers 146-151

DURA-BLOK™ Rooftop Supports

Info. & Specifications 152
Base Support - With & Without Channel 154
Base Support - Pipe/Tubing Riser 154
Base Support Riser - Channel & Pipe Roller 155
Base Support - ‘H’ Stand 156-157
Base Support - Pipe Roller 158
Application & Roof-Top Walkway Photos 159-160
Solar Application Photos 161

Electrical Accessories
Info. & Specifications 162
Selection Chart 163
Fluorescent Fixture Hangers 164-166
Electrical Accessories 167-168
Junction Boxes & Strut Joiners 169-171
Electrical Hardware 172
Porcelain & Maple Clamps 173-175

Aluminum & Stainless Steel Materials

Info. & Specifications 176
Aluminum 177-179
Stainless Steel 180-181
Fiberglass Materials
Info. & Specifications 182-183
Channels 184-188
Hardware 188-190
Fittings 191-199

Mini Channel & Fittings

Info. & Specifications 200
Mini Channels & Channel Nuts 201-203
Mini Fittings 203-211
Concrete Inserts
Info. & Specifications 212-213
Continuous Inserts 214-216
Spot Inserts 217
Insert Accessories 218
Anchors 219-221
Slotted Angle
Info. & Specifications

Sizes
Loading Charts
Slotted Angle Fittings
............................................
.....................................
.......................................................

Reference Data
Tolco to B-Line Cross
Index
For additional information on Tolco™ brand part numbers beginning with Fig., visit www.cooperbline.com/tolco
Strut Systems 1
products which are used in support of equipment for
the exacting standards of research, design, engineering,
ur strut product line. Our customers have access to the
l framing, cable tray, pipe hangers, slotted angle, and

nc. All B-Line products are manufactured to meet or

ustry standards set for their design and manufacture.
9-0326

g Manufacturers Association
............................ 2-3

4-6
7-9
10-13

14-15
16-17
18-19
20-27
28-29
30-31
32-37
38-39
40-42

44
45-49
50-51
52-58
59-70

72
73-75
76-81
82-84
85
86
87-90
91-93
94-96
97-98
99-105
106-111
 112
113-125

Strut Systems

126
127-135
136
137
138-145
146-151

152
154
154
155
156-157
158
159-160
161

162
163
164-166
167-168
169-171
172
173-175

176
177-179
180-181

182-183
184-188
188-190
191-199

200
201-203
203-211

212-213
214-216
217
218
219-221
 222
Slotted Angle
223
224-226
227
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228-237
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238-240
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241-248

www.cooperbline.com/tolco
 Our strut support system is designed with many time-saving features. They are fully adjustable and reusab
channels, fittings and accessories for multi-purpose applications.
Introduction

• No Welding
• No Drilling
• Use Your Imagination

The strut system installs quickly, with no need for spe

wrench and hacksaw.
Channels and parts can be taken apart for reuse
as quickly as they were assembled, yet help provide t
construction. This eliminates welding and drilling whic
savings in time and labor.
1. Channel nut may be inserted anywhere along continuous slot. 2. A 90° turn aligns channel nut grooves with
Designed for easy insertion and self-alignment.

3. Position fitting over channel nut and insert bolt to start any 4. With the twist of a wrench, channel nut loc
connection. lips.

2 Strut Systems
 Our strut system provides an economical solution for electrical, mechanical and industrial supports wi
applications in the construction industry.
Electrical Applications
• Lighting Fixture Supports
• Raceway Systems
• Trapeze Hangers
• Pipe & Conduit Supports
• Cable Tray Supports
• Beam Adjustments
Introduction
Mechanical Applications
• Piping Racks
• Tunnel Pipe Stanchions
• Concrete Inserts
• Beam Attachments
• Pipe Risers
Industrial Applications
• Racks and Shelving
• Partitions
• Production Line Supports
• Trolley Systems
• Wall Framing

Strut Systems 3
saving features. They are fully adjustable and reusable, with a complete line of
pplications.

o Welding
o Drilling
se Your Imagination

strut system installs quickly, with no need for special tools. All you need is a
nch and hacksaw.
nnels and parts can be taken apart for reuse
quickly as they were assembled, yet help provide the strength of welded
struction. This eliminates welding and drilling which can have substantial
ngs in time and labor.
2. A 90° turn aligns channel nut grooves with inturned lips of the channel.

4. With the twist of a wrench, channel nut locks its teeth firmly against inturned
lips.

Strut Systems
or electrical, mechanical and industrial supports with an unlimited variety of
 MATERIALSCarbon SteelChannels made from high-quality
Aluminum carbon steel are continuously roll formed to precise dimensions. B
Standard aluminum channel is extruded
from aluminum alloy 6063-T6. Strut
fittings are made from aluminum alloy
5052-H32.
The high strength to weight ratio of
channel made of aluminum helps greatly
reduce the overall cost of installation
through ease of handling and field cutting.
Aluminum owes its excellent corrosion
resistance to its ability to form an
aluminum oxide film that immediately
reforms when scratched or cut. In most
outdoor applications, aluminum has
excellent resistance to “weathering”.
The resistance to chemicals, indoor or
outdoor, can best be determined by tests
conducted by the user with exposure to
the specific conditions for which it is
intended. The corrosion resistance of
aluminum to some commonly known
chemicals is shown in the Corrosion Chart.
For further information, contact
us or the Aluminum Association.
Fiberglass
We offer two fire retardant (FR) resins for
strut systems, polyester and vinyl ester.
Both resins are ideal for corrosive
environments or nonconductive
applications with moderate strength
requirements. Some common types of
environments where Vinyl Ester Resins
are recommended, that Poly Esters are
not, are paper mills, most any metal
plating operation and any condition with
Technical Data

B-Line Steel Strut is stamped with:

Traceable to the steel’s origin Material/Finish
B-Line part number designation
Company Name

4 Strut Systems
 concentrated levels of Chlorine, [ Cl- ]. Please consult our
fiberglass corrosion resistance charts on pg. 183 for
specific chemical recommendation data.
Unlike other base materials depicted in this catalog,
fiberglass exhibits unique physical property changes
when operating in elevated temperature conditions that
are a fraction of increase compared to steel or
aluminum. Thus, it is advised against using fiberglass in
temperatures greater than 200° F.
Please refer to the "Corrosion Resistance Guide" below
for specific applications.
The fiberglass strut systems are manufactured from
glass fiber-reinforced plastic shapes that meet ASTM E-
84, Class 1 Flame Rating and self-extinguishing
requirements of ASTM D-635. A surface veil is applied
during pultrusion to insure a resin-rich surface and
ultraviolet resistance.
While polyester is sufficient for most uses, vinyl ester is
suitable for a broader range of environments.

ut is stamped with:
e steel’s origin Material/Finish
mber designation
e

Strut Systems
 FINISHES Chromium/ Zinc Hot Dip Galvanized After
Zinc Coatings Chromium/ Zinc is a corrosion resistant galvanized or batch hot d
Zinc protects steel in two ways. First it composition, which was developed to Hot dip galvanized strut pr
protects the steel as a coating and second protect fasteners and small bulk items forsteel and then completely
as a sacrificial anode to repair bare areas automotive use. The coating applications zinc. A metallic bond occur
such as cut edges, scratches, and gouges. have since been extended to larger parts that completely coats all s
The corrosion protection of zinc is directly and other markets. welds.
related to its thickness and the Chromium/Zinc composition is an Another advantage of this
environment. This means a .2 mil coating aqueous coating dispersion containing Strut products that are hot
will last twice as long as a .1 mil coating in chromium, proprietary organics, and zinc fabrication have a minimum
the same environment. flake. per square foot on each sid
Galvanizing also protects cut and drilled This finish provides 500 hours protection square foot of steel, accord
Electrogalvanized Zinc Electrogalvanized in salt spray testing per ASTM B117. The zinc thickness is contr
Zinc (also known as zinc plated or Pre-Galvanized Zinc each part is immersed in th
electroplated) is the process by which a (Mill galvanized, hot dip mill galvanized the speed at which it is rem
coating of zinc is deposited on the steel by or continuous hot dip galvanized) Pre- dipping" refers to parts too
electrolysis from a bath of zinc salts. galvanized steel is produced by coating galvanizing kettle and, the
A rating of SC3, our standard, provides a coils of sheet steel with zinc by end at a time. It does not r
minimum zinc coating thickness of .5 mils continuously rolling the material through thickness.
(excluding hardware, which is SC1 = .2 molten zinc at the mills. This is also The layer of zinc which bon
mils). known as mill galvanized or hot dip mill protection against corrosio
When exposed to air and moisture, zinc galvanized. These coils are then slit to overall barrier coating. If th
forms a tough, adherent, protective film size and fabricated by roll forming, scratched or gouged, zinc'
consisting of a mixture of zinc oxides, shearing, punching, or forming to upon to protect the steel b
hydroxides, and carbonates. This film is in produce our pre-galvanized strut Hot-Dip Galvanized After F
itself a barrier coating which slows products. for prolonged outdoor expo
subsequent corrosive attack on the zinc. The G90 specification calls for a coating steel for 20 years or more
This coating is usually recommended for of .90 ounces of zinc per square foot of environments and in many
indoor use in relatively dry areas, as it steel. This results in a coating of .45 best results, a zinc rich pai
provides ninety-six hours protection in salt ounces per square foot on each side of should be applied to field c
spray testing per ASTM B117. the sheet. This is important when provide immediate protect
comparing this finish to hot dip eliminate the short time pe
galvanized after fabrication. “heal” the damaged coatin
During fabrication, cut edges and welded
areas are not normally zinc coated;
however, the zinc near the uncoated
metal becomes a sacrificial anode to
protect the bare areas after a short
period of time.
Technical Data

edges.
Zn ZnFe
Fe
ZnO
 Anticipated Life of Zinc Coatings In Various Atmospheric Environments
40
30
Life in
Years 20
10
Rural Tropical Temperature Suburban Urban Highly
Marine Marine
Industrial
Environment

36 Hot Dip Galvanized

= Zinc Coating 1.50 Oz./Ft. (.0026” Thick)
2

29
Pre-Galvanized
= Zinc Coating 0.45 Oz./Ft. (.00075” Thick)
2

25
21 18

10 11
8
7 6 5
3

Strut Systems 5
ot Dip Galvanized After Fabrication (Hot dip
alvanized or batch hot dip galvanized)
ot dip galvanized strut products are fabricated from
teel and then completely immersed in a bath of molten
nc. A metallic bond occurs resulting in a zinc coating
hat completely coats all sufaces, including edges and
elds.
nother advantage of this method is coating thickness.
trut products that are hot dip galvanized after
abrication have a minimum thickness of 1.50 ounces
er square foot on each side, or a total 3.0 ounces per
quare foot of steel, according to ASTM A123.
he zinc thickness is controlled by the amount of time
ach part is immersed in the molten zinc bath as well as
he speed at which it is removed. The term "double
ipping" refers to parts too large to fit into the
alvanizing kettle and, therefore, must be dipped one
nd at a time. It does not refer to extra coating
hickness.
he layer of zinc which bonds to steel provides a dual
rotection against corrosion. It protects first as an
verall barrier coating. If this coating happens to be
cratched or gouged, zinc's secondary defense is called
pon to protect the steel by galvanic action.
ot-Dip Galvanized After Fabrication is recommended
or prolonged outdoor exposure and will usually protect
teel for 20 years or more in most atmospheric
nvironments and in many industrial environments. For
est results, a zinc rich paint (available from B-Line)
hould be applied to field cuts. The zinc rich paint will
rovide immediate protection for these areas and
liminate the short time period for galvanic action to
heal” the damaged coating.
 DURA-GREEN™ and “Standard for Pipe Hanger Equipment for
DURA- COPPER™ Epoxy Coatings Fire Protection Service, UL203”.
DURA-GREEN and DURA-COPPER epoxy Due to DURA-GREEN’s organically based
coatings are water borne epoxy coatings composition, it seats itself into porous
applied to B-Line products by a precisely surfaces more completely and efficiently
controlled cathodic electro-deposition than zinc coatings. As these porous
process. This process is accomplished using caverns are filled along the material
a conveyor to transport channel and fittings profile, the outer finished surface
through several cleaning, demonstrates an increased smooth
phosphatizing and application stages prior uniform plane which produces
to being baked (See diagram below). considerably less off-gasing when tested.
This custom-designed paint system is used DURA-GREEN channel meets or exceeds
for painting all channels, channel 100 level clean room standards. This was
combinations, slotted angle, and fittings. confirmed by testing the channel in
Samples are selected on a routine basis for accordance with Boeing (PCL) Standards,
Salt Spray (fog) testing to verify the quality which are more stringent and complete
of the finish. These tests are performed in than ASTM E595-93. DURA-GREEN was
accordance with ASTM B117 and evaluated found to be a superior finish, due in part to
and related according to ASTM D1654 its proven application process.
(Tables 1 & 2). PVC Coating
The DURA-GREEN and DURA-COPPER Another of the corrosion resistant coatings
Epoxy coatings have been tested and listed offered by B-Line is PVC (polyvinyl
by Underwriters Laboratories in accordance chloride), applied over steel or aluminum
with “Standard for Surface Metal Raceway channel and fittings. The PVC coating
and Fittings, UL5” and process begins by cleaning the product
SALT SPRAY TEST RESULTS
Technical Data

˛ Unscribed 5% Scribed 1/8” (3.2) Creepage from

Type of Finish Failure (1) Scribe (1)

B-Line DURA-GREEN Epoxy 1000 Hours 312 Hours

Mill Galv. (Pre-Galv.) G90 192 Hours 288 Hours
Perma-Green 438 Hours 231 Hours
Zinc Chromate 36 Hours 96 Hours
Industry Green (Range) 10 to 36 Hours 4 to 30 Hours
(1) All salt spray (fog) tests conducted in accordance with ASTM B117 and evaluated and rated the absence of voids, pi
according to ASTM D1654 Tables 1 & 2. Tests are performed and certified by an independent
testing laboratory.
DURA-GREEN™/DURA-COPPER™ EPOXY COATING PROCESS
6 Strut Systems
TANK 1 TANK 2 TANK 3 TANK 4 TANK 5 TANK 6 TANK 7 TANK 8
The channel A A The material A The The first The final
rinse is phosphatiz pre-deionized electro- post rinse
and parts are ed sealer moves through rinse coating rinse insures a
applied to is applied prepares clear water rinse tank removes smooth,
thoroughly to insure the metal for the to applies a any nonblemi
remove corrosion remove excess uniform unelectri sh
cleaned and resistance cathodic electro- coat of cally surface.
insoluble salts and paint phosphates. epoxy attracte
phosphatized. and adhesion. coating. paint to d solids.
unreacted the
phosphates. entire
surface.
 thoroughly. A bonding coat is applied to the part and
then preheated to a temperature above the melting
point of the coating powder. The product is then passed
through a fluidized bed of vinyl plastic powder where the
powder particles melt, adhere and flow out to form a
smooth continuous coating. The thickness is controlled
by the base metal temperature and the immersion time
in the bed. It is then post-heated to complete the fusion
of the outer surfaces.
The standard coating thickness of B-Line’s PVC coated
products is 15 mils (.380 mm), plus or minus 5 mils
(.125 mm). Since the chemistry, not the thickness of
vinyl plastic PVC determines longevity, a coating of 10
to 20 mils (.250 to .500 mm) is more than adequate. If
the corrosive conditions are such that the plasticizers
are leeched out, a thicker coating will do little to extend
the life of a coated product.
For certain environments, a plastisol dipped PVC coating
is available on request.
PVC coating depends totally on the concept of
encapsulation attached to the base metal by a bonding
agent. If any hole or discontinuity occurs, the corrosive
action can undercut the base metal to a point where all
that remains is the PVC.
In the event of field cuts or any other damage to the
coating, a liquid PVC patch, available from B-Line, must
be applied to maintain the integrity of the coating. After
the installation is complete, a thorough inspection
should be performed to assure

the absence of voids, pinholes, or cuts.

Strut Systems
TANK 8 BAKE OVEN
The final The curing
rinse process
insures a takes 20
smooth, minutes at a
nonblemi baking
sh temperature
surface. of 375° F
(199° C).
 WELDING weld sequence, speed and duration are
The welding procedures used in the carefully controlled and monitored by a
fabrication of our steel products are in sophisticated electronic control system.
accordance with American Welding Society A statistical quality control program,
Standards. To achieve the highest quality in combining destructive and non-
our manufacturing processes, our welders destructive testing, is used to ensure
follow standards set by AWS Code. high quality welds.
Spot Welding MIG Welding
Spot welded back-to-back channel is MIG welded, more properly called gas
manufactured using a modern DC powered metal arc welded (GMAW) combination
resistance welder controlled by a channels and fittings, are produced
microprocessor. This produces a series of when physical dimensions or certain
spot welds with speed and consistency. combinations require a weld process
Consistency is one of the other than automatic spot welding. The
most important advantages in specifying same quality control requirements are
back-to-back channel. Variables such as imposed on MIG welded and spot-
welded products.
Technical Data

Spot Weld MIG Weld

Strut Systems 7
Quality AssuranceOur Quality Assurance Program has been developed and implemented for compliance with ISO9001:2008. We also com
CORROSION GALVANIC SERIES IN SEA WATER
All metal surfaces are affected by corrosion. Metals in descending order of activity in the presence of an electrolyte.
Depending on the physical properties of the
metal and the environment to which it is
exposed, chemical or electromechanical
corrosion may occur.
Atmospheric Corrosion Atmospheric
corrosion occurs when metal is exposed to
airborne liquids, solids or gases. Some
sources of
atmospheric corrosion are moisture, salt, dirt
and sulphuric acid. This form of corrosion is
typically more severe outdoors, especially
near marine environments.
Chemical Corrosion
Chemical corrosion takes place when metal
comes in direct contact with a corrosive
solution. Some factors which affect the
severity of chemical corrosion include:
chemical concentration level, duration of
contact, frequency of washing, and
operating temperature.
Storage Corrosion
Wet storage stain (white rust) is caused by
the entrapment of moisture between
surfaces of closely packed and poorly
ventilated material for an extended period.
Wet storage stain is usually superficial,
having no affect on the properties of the
metal.
Light staining normally disappears with
weathering. Medium to heavy buildup
should be removed in order to allow the
formation of normal protective film.
Proper handling and storage will help to
assure stain-free material. If product arrives
wet, it should be unpacked and dried before
storage. Dry material should be stored in a
well ventilated “low moisture” environment
to avoid condensation formation. Outdoor
storage is undesirable, and should be
avoided whenever possible.
Galvanic Corrosion
 Anodic End
Magnesium
Magnesium Alloys Zinc
Beryllium
Aluminum - Zinc Alloys (7000 series) Aluminum - Magnesium Alloys
(5000 series) Aluminum (1000 series)
Aluminum - Magnesium Alloys (3000 series) Aluminum - Magnesium -
Silicon Alloys (6000 series) Cadmium
Aluminum - Copper Alloys (2000 series) Cast Iron, Wrought Iron, Mild
Steel Austenitic Nickel Cast Iron
Type 410 Stainless Steel (active) Type 316 Stainless Steel (active)
Type 304 Stainless Steel (active)
Naval Brass, Yellow Brass, Red Brass Tin
Copper
Lead-Tin Solders
Admiralty Brass, Aluminum Brass Manganese Bronze
Silicon Bronze Tin Bronze
Type 410 Stainless Steel (passive) Nickel - Silver
Copper Nickel Alloys Lead
Nickel - Aluminum Bronze Silver Solder
Nickel 200 Silver
Type 316 Stainless Steel (passive) Type 304 Stainless Steel (passive)
Incoloy 825
Hastelloy B Titanium Hastelloy C Platinum Graphite
Cathodic End
Technical Data
Galvanic corrosion occurs when two or cathode, and will be protected. If steel
more dissimilar metals are in contact in the and copper are in contact, the steel is
presence of an electrolyte (ie. moisture). now the anode and will corrode.
An electrolytic cell is created and the The rate at which galvanic corrosion
metals form an anode or a cathode occurs depends on several factors:
depending on their relative position on the 1. The relative position on the Galvanic
Galvanic Series Table. Series Table - the further apart materials
The anodic material will be the one to are in the Galvanic Series Table, the
corrode. Anodic or cathodic greater the potential for corrosion of the
characteristics of two dissimilar metals will anodic material.
depend on the type of each material. For
example: If zinc and steel are in contact,
the zinc acts as the anode and will corrode;
the steel acts as the
8 Strut Systems
WATER
y in the presence of an electrolyte.
 2. The amount and concentration of electrolyte present
- an indoor, dry environment will have little or no
galvanic corrosion compared to a wet atmosphere.
3. The relative size of the materials - a small amount of
anodic material in contact with a large cathodic
material will result in greater corrosion. Likewise, a
large anode in contact with a small cathode will
decrease the rate of attack.

Strut Systems
 Type 304
Chemical Aluminum Dura-Green PVC Stainless
Acetic Acid 10% R NR R R
Acetic Acid 2% R F R R
Acetone R R NR R
Ammonium Hydroxide-Conc. R R R R
Ammonium Hydroxide 10% F R R R
Ammonium Hydroxide 2% R R R R
Benzene R R NR R
Bromine Water NR R R NR
Butanol (Butyl Alcohol) R R R R
Carbon Disulfide R R NR R
Carbon Tetrachloride F R F R
Chlorine Water R R R NR
Cutting Oil – R – –
Diethanolamine R R NR –
Ethanol R R R R
Ethyl Acetate R R NR –
Ethylene Dichloride F R NR –
Formaldehyde 20% R R R R
Gasoline R R R R
Glycerine R R R R
Household Detergent 10% F R R R
Hydrochloric Acid 40% NR NR R NR
Hydrochloric Acid 10% NR F – NR
Hydrochloric Acid 2% NR F – NR
Hydrogen Peroxide 30% R NR R R
Hydrogen Peroxide 3% R R – R
Hydrogen Sulfide (Gas) R R R F
JP-4 Jet Fuel R R R R
Lactic Acid 85% F R R NR
Latex R R – R
Linseed Oil Fatty Acid R F R R
Methanol R R R R
Methyl Ethyl Ketone R R NR –
Methyl Isobutyl Ketone R R NR –
Mineral Spirits R R – –
Motor Oil-10W R R R R
Naphtha, VM&P R R R R
Nitric Acid 2% F NR R R
Perchloroethylene R R – –
Petroleum Ether – R – R
Phenol 10% R R NR R
Phosphoric Acid 2% F NR R R
Potassium Hydroxide 50% NR R R R
Potassium Hydroxide 10% NR R R R
Potassium Hydroxide 2% NR R R R
Sodium Chloride 25% F R R R
Sodium Hydroxide 50% NR R R R
Sodium Hydroxide 10% NR R R R
Sodium Hydroxide 2% NR R R –
Sodium Hypochlorite-C1. 10% F R R –
Sodium Hypochlorite-C1. 6% F R R NR
 Sulfuric Acid 2% F NR R NR
Tall Oil Fatty Acid (Syfate 94) R R R –
Tannic Acid 50% F R R R
Water-Deionized R R R R
Water-Sea F F R R
Water-Tap R R R F
Xyol R R NR –
Technical Data

Fiberglass corrosion chart on page 183.

The corrosion data given in this table is for general comparison only.
The presence of contaminates and the effect of temperature in chemical environments can greatly affect the corrosion of any m
B-Line strongly suggests that field service tests or simulated laboratory tests using actual environmental conditions be conduct
materials and finishes to be selected.
R=Recommended
F=May be used under some conditions NR=Not Recommended
–Information not available

Strut Systems 9
Type 316 Zinc Coated
Stainless Steel
R NR
R NR
R R
R –
R –
R –
R –
NR –
R R
R –
R –
F R
– –
– NR
R R
– R
– R
R R
R R
R R
R –
NR NR
NR NR
NR NR
R –
R –
R –
R –
– –
R NR
R –
R R
– R
– R
– –
R R
R R
R –
– NR
R R
R R
R NR
R –
R –
R –
R F
R NR
R F
– –
– –
R –
 R NR
– –
R –
R F
R F
F R
– –

nts can greatly affect the corrosion of any material.

actual environmental conditions be conducted in order to determine the proper
 DESIGN OF STRUT SYSTEMS Cantilever Beam
Beams Cantilever beams are often viewed as
Beams are usually defined as horizontal variations of a fixed beam, but they have
members which are subjected to vertical special characteristics of their own. One
loads such as shelves, platforms or end of the channel is firmly attached to a
supports for pipes, conduits or cable trays. rigid support while the other end remains
The following is a brief overview of common completely free.
beam configurations: A shelf bracket is an example of a
Simple Beam cantilever beam.
An example of a simple beam is a length of Continuous Beam
channel placed across two cylinders. When This beam configuration is commonly used
a load is applied, the channel will support in lighting installations. The continuous
the load because of its stiffness. The beam possesses traits of both the simple
cylinders serve to support the channel, but and fixed beams. When equal loads are
do not interfere with its natural tendency to applied to all spans simultaneously, the
flex or bend. Simple beam analysis is used counter-balancing effect of the loads on
almost universally for beam comparisons, both sides of a support restricts the
even though it is seldom practical in field movement of the channel at the support,
installations. similar to that of the fixed beam. The end
A cable tray or conduit trapeze hanger spans behave substantially like simple
closely resembles a simple beam. beams.
Point Load Continuous beam installations can typically
Fixed Beam support 20% more load than a simple
This type of fixed support restricts the beam of the same span with approximately
movement of the ends of the channel when half the deflection.
a load is applied. Because of this, the Therefore, simple beam data should be
stiffness of the channel at the ends and used for a general comparison only. An
center is employed to resist the load. The example of this configuration is found in a
result is a load capability which is greater long run of channel when installed across
than that of an identical simple beam. several supports to form a number of
The fixed beam can be approximated by spans.
bolting or welding a length of channel to
rigid supports.
Technical Data

10 Strut Systems
 Deflection
Deflection, commonly referred to as “sag”, is inherent
in applying a load to a beam and cannot be avoided.
Any and all beams will deflect when loaded. The amount
of deflection will vary depending upon the material and
the stiffness or moment of inertia. The deflection
equations in this section show that increasing the
stiffness can be increased by a variety of methods.
Increasing the depth of the channel is the most direct
method.
Point Load
The material used affects deflection in a manner which
is significantly different from the way in which it affects
load capacity. The deflection under load is inversely
proportional to a material property known as the
“modulus of elasticity” designated by “E”.
The modulus of elasticity is dependent upon the basic
composition of the material and is not necessarily
related to the material’s strength.

Strut Systems
Safety Factor support and bracing inherently. Piping,
The design loads given for strut beam loads tubing, cable trays, or conduits mounted to
are based on a simple beam condition using the strut with straps and clamps prevent
allowable stress of 25,000 psi. This twisting or lateral movement. If no such
allowable stress results in a safety factor of lateral support exists, contact the factory
1.68. This is based upon a virgin steel for loading recommendations.
minimum yield strength of 33,000 psi cold Columns
worked during rolling to an average yield Columns are vertical members which carry
stress of 42,000 psi. loads in compression. One common
Aluminum typically has an elastic modulus example of a channel column is the
which is 1/3 that of steel even though they vertical members of a storage rack.
may have identical strength. As a result, the In theory, a column will carry a load equal
deflection of aluminum channel will to its cross sectional area multiplied by
be three times that of steel channel under the ultimate compressive stress of the
equal loading. In areas where structures will material of which the column is made. In
be subject to general viewing, deflection reality, there are many factors affecting
can produce a displeasing effect. To the the load capacity of a column, such as the
untrained eye, a sagging channel may tendency to buckle or twist laterally
appear to be a result of poor design or (torsional-flexural buckling), the type of
excessive loading. This is not usually the connection at the top or bottom, the
case. Many properly designed channel eccentricity of the load application, and
installations will show material imperfections. Several of these
a noticeable deflection at their designed failure modes have been considered in the
loads. In areas where cosmetics are not allowable column load tables shown in the
important, deflection should not be a factor. “Channel” section of this catalog.
Designing an entire installation based on B-Line strongly recommends that the
minimal deflection could result in an over engineer perform a detailed study of the
designed structure. This translates into many variable conditions before the
increased material and installation cost. selection process begins.
Where cosmetics are important, it may be Design Factors to be Considered The
necessary to limit the deflection to an loading capacity of channel depends
aesthetically pleasing amount. This primarily on the material, its cross-
“acceptable deflection” amount is typically sectional design, and the beam or column
given as a fraction loading configuration. It should be noted
of the span. 1/240 span deflection is typically that if two lengths of channel have
the limit where the amount of deflection identical designs and configurations, the
appears negligible. For example, a beam one made of the stronger base material
span of 240” would be allowed 1” (240/240) will support a larger load. Therefore, any
of deflection at the mid point. A 120” span comparison of channel should begin by
would only be allowed 1/2” (120/240) of determining whether the materials are
deflection. The maximum load for the approximately equal in strength.
channel must be limited in order to remain The column loading chart for each channel
under these deflection requirements. The lists the allowable load for each channel in
allowable load resulting in 1/240 span compression. This load varies depending
deflection is posted in the beam load chart on the support condition or “K-factor”.
for each channel size. Several “K-factors” are listed, which
For even more stringent deflection correspond to the following support
requirements, an allowable load is listed in conditions:
the beam load charts which results in 1/360 K = .8 pinned top - fixed bottom K = .65
span deflection. This amount of deflection is fixed top - fixed bottom
sometimes used for beams in finished K = 1.0 pinned top - pinned bottom K =
ceilings that are to be plastered. 1.2 free top - fixed bottom
Twisting & Lateral Bracing There are a number of physical properties
Loading of strut on long spans can cause which are important to the complete
torsional stress, resulting in the tendency of design of a channel member; the “section
the strut to twist or bend laterally. This modulus” designated as “Sx” or “Sy”,
phenomenon reduces the allowable beam “moment of inertia” designated by “Ix” or
loads as shown in the beam loading charts. “Iy”, and the “radius of gyration” which is
It is recommended that long spans be given as “rx” or “ry”.
supported in a manner to prevent twisting
(fixed ends), and that the channel have
adequate lateral bracing. Many typical strut
applications provide this
Technical Data

Strut Systems 11
Every structural material has its own maximum or ultimate stress, which is usually expressed in “pounds per square inch” (pascals). Any loa
 The data shown in the beam load charts for appropriate channels on page(s) 16 thru 37 is for simply supported, single span be
load. For other loading and/or support conditions, use the appropriate factor from the chart below.
LOAD AND SUPPORT CONDITION Load Factor

Simple Beam - Uniform Load 1.00

Span

Simple Beam - Concentrated Load at Center 0.50

Simple Beam - Two Equal Concentrated Loads at 1/4 Points 1.00

Beam Fixed at Both Ends - Uniform Load 1.50

Beam Fixed at Both Ends - Concentrated Load at Center 1.00

Cantilever Beam - Uniform Load 0.25

Cantilever Beam - Concentrated Load at End 0.12

Continuous Beam - Two Equal Spans - Uniform Load on One Span 1.30
Span Span

Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans 1.00

Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span 0.62

Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans 0.67
Technical Data

EXAMPLES:
PROBLEM: PROBLEM:
Calculate the maximum allowable load and corresponding Calculate the maximum allowable load and correspondin
B22 beam with a concentrated deflection of a cantilever B52 beam with a uniformly distributed load at midspan as shown
load.
SOLUTION: SOLUTION:
From beam load chart for B22 (page 22), maximum allowable From beam load chart for B52 (page 33), maximum allow
corresponding deflection is B. load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above. Multiplying by the appropriate factors shown in chart abo
LOAD = A x load factor = LOAD = A x load factor =
DEFLECTION = B x deflection factor = DEFLECTION = B x deflection factor =
12 Strut Systems

96”
 for simply supported, single span beams with a uniformly distributed
rt below.
Deflection Factor

1.00

0.80

1.10

0.30

0.40

2.40

3.20

0.92

0.42

0.71

0.48

mum allowable load and corresponding deflection of a simply supported

distributed load at midspan as shown.

art for B52 (page 33), maximum allowable Load is A and the
tion is B.
ppropriate factors shown in chart above.
=
deflection factor =
Strut Systems
RECOMMENDED BOLTED METAL FRAMING SPECIFICATION
Brackets [ ] indicate alternative E. NEC Compliance: Comply with the latest
specifications which may be substituted by revision NFPA 70 - Article 352 “Surface
the project engineer. Metal Raceways and Surface Nonmetallic
PART 1 - GENERAL Raceways”.
1.01 WORK INCLUDED F. UL Compliance: Comply with UL
A. Continuous slot, bolted framing channels “Standard for Surface Metal Raceway and
and all associated fittings and hardware. Fittings”.
B. Trapeze type supports for cable tray, 1.04 SUBMITTALS
conduit, pipe and other similar systems. A. Submit drawings of strut and
C. Use of bolted metal framing as a surface accessories including clamps, brackets,
metal raceway. hanger rods and fittings.
1.02 REFERENCES B. Submit manufacturer’s product data on
A. ASTM A108 - Specification for Steel Bars, strut channels including, but not limited
Carbon, Cold Finished, Structural Quality. to, types, materials, finishes, gauge
B. ASTM A123 - Specification for Zinc (hot- thickness and hole patterns. For each
dip galvanized) Coatings on Products different strut cross section, submit cross
Fabricated from Rolled, Pressed, and Forged sectional properties including Section
Steel Shapes, Plates, Bars and Strips. Modulus (Sx) and Moment of Inertia (Ix).
C. ASTM A1011, 33,000 PSI min. yield - 1.05 DELIVERY, STORAGE AND HANDLING
Specification for Steel, Sheet and Strip, A. Deliver strut systems and components
Carbon, Hot-Rolled, Structural Quality. carefully to avoid breakage, denting, and
D. ASTM B633 - Specification for scoring finishes. Do not install damaged
Electrodeposited Coatings of Zinc on Iron equipment.
and Steel. B. Store strut systems and components in
E. ASTM A653 33,000 PSI min. yield G90 original cartons and in clean dry space;
- Specification for Steel Sheet, Zinc Coated protect from weather and construction
(Galvanized) by the Hot-Dip Process, traffic.
Structural Quality. PART 2 - PRODUCTS
F. ASTM A1018 - Standard Specification for 2.01 ACCEPTABLE MANUFACTURERS
Steel, Sheet and Strip, Heavy-Thickness A. Manufacturer: Subject to compliance
Coils, Carbon, Hot-Rolled, Structural Quality. with these specifications, strut systems to
G. MFMA - Metal Framing Standards be installed shall be as manufactured by
Publication, MFMA-4. B-Line Systems, Inc. [or engineer
1.03 QUALITY ASSURANCE approved equal.]
A. Manufacturers: Firms regularly engaged 2.02 STRUT CHANNELS AND COMPONENTS
in the manufacture of bolted metal framing A. General: Strut shall be 15/8” wide in
of the types required, whose products have varying heights and welded combinations
been in satisfactory use in similar service as required to meet load capacities and
for not less than 5 years. designs indicated on the drawings.
B. A material heat code number shall be B. Material and Finish: Material and finish
stamped on all strut and fittings. This is specifications for each strut type are as
required to maintain traceability of the follows:
product to the material test reports to the 1. Aluminum: Strut shall be manufactured
ASTM standard. of extruded aluminum alloy 6063-T6. All
C. For stainless steel items, the part number fittings and hardware shall be zinc plated
shall contain a material designator according to ASTM B633. For outdoor use,
(EXAMPLE: B-Line B22SS6 for type 316 or all fittings and hardware shall be stainless
B22SS4 for type 304), or a separate stamp steel Type 316 [Type 304] or chromium
shall be included to reference the type of zinc, ASTM F1136 Gr. 3.
material used. 2. Epoxy Painted: Strut shall be made from
D. MFMA Compliance: comply with the latest steel meeting the minimum mechanical
revision of MFMA Standard Publication properties of ASTM A1011 33,000 PSI min
Number MFMA-4, “Metal Framing”. yield, then painted with water borne epoxy
applied by a cathodic electro-deposition
Technical Data

Bolt Size
1
/4-20
5
/16-18
3
/8-16
1
/2-13
Strut Systems 13
N
process. Fittings shall be manufactured from steel
meeting the minimum requirements of ASTM A1018
33,000 PSI min. yield. The fittings shall have the same
epoxy finish as the strut. Threaded hardware shall be
zinc plated in accordance with ASTM B633 Service Class
1 (SC1).
Service Class 1 is not an acceptable coating for fittings
or components other than threaded hardware.
3. Pre-Galvanized Steel: Strut shall be made from
structural quality steel meeting the minimum
mechanical properties of ASTM A653 33,000 PSI min.
yield, mill
galvanized coating designation G90. Fittings shall be
manufactured from steel meeting the minimum
requirements of ASTM A1018 33,000 PSI min. yield and
zinc plated in accordance with ASTM B633 service class
3 (SC3). Threaded hardware shall be zinc plated in
accordance with ASTM B633 Service Class 1 (SC1).
Service Class 1 is not an acceptable coating for fittings
or components other than threaded hardware.
4. Hot-Dip Galvanized Steel: Strut shall be made from
structural quality steel meeting the minimum
mechanical properties of ASTM A1011 33,000 PSI min.
yield and shall be hot-dip galvanized after fabrication in
accordance with ASTM A123. Fittings shall be
manufactured from steel meeting the minimum
requirements of ASTM A1018 33,000 PSI min. yield, and
hot-dip galvanized after fabrication in accordance with
ASTM A123. All hardware shall be stainless steel Type
316 [Type 304] or chromium zinc ASTM F1136 Gr. 3. All
hot- dip galvanized after fabrication products must be
returned to point of manufacture after coating for
inspection and removal of all sharp burrs.
5. Stainless Steel: All strut, fittings and hardware shall
be made of AISI Type 316 [Type 304] stainless steel as
indicated. Channels must be identified as required in
previous section 1.03 Quality Assurance.
PART 3 - EXECUTION
3.01 INSTALLATION
A. Install strut as indicated; in accordance with
equipment manufacturer’s recommendations, and with
recognized industry practices.
B. All nuts and bolts shall be tightened to the following
values.
Torque (ft-lbs)
6
11
19
50
 Channel
Metal framing channel is cold formed on our modern rolling mills from 12 Ga. (2.6mm), 14 Ga. (1.9mm),
carbon steel strips. A continuous slot with inturned lips provides the ability to make attachments at an
Lengths & Tolerances
All channels excluding ‘SH’ style
±1
/8” (3.2mm) on 10’ (3.05m) and
±3
/16” (4.76mm) on 20’ (6.09m)
All ‘SH’ channels only
±1
/4” (6.35mm) on 10’ (3.05m) and
±1
/2” (12.70mm) on 20’ (6.09m)
Custom lengths are available upon request.
Slots
Slotted series of channels offer full flexibility. A variety of pre-punched slot patterns eliminate the need
for hole locations. Slots offer wide adjustments in the alignment and bolt sizing.
Holes
A variety of pre-punched 9/16” (14.3 mm) diameter hole patterns are available in our channels. These ho
economical alternative to costly field drilling required for many applications.
Knockouts
When used with series B217-20 Closure Strips, knockout channels can be used to provide an economic
raceway. Channels are furnished with 7/8” (22.2 mm) knockouts on 6” (152 mm) centers, allowing for per
spans up to 20’ (6.09 m).
Materials & Finishes (Unless otherwise noted) Steel: Plain & Pre-galvanized
12 Ga. (2.6), 14 Ga. (1.9) and 16 Ga. (1.5)
Channel & Combinations

Finish
Code Finish Specification

PLN Plain ASTM A1011, 33,000 PSI

min. yield
GRN DURA-GREEN™
GLV Pre-Galvanized ASTM A653 33,000 PSI
min. yield
HDG Hot-Dipped Galvanized ASTM A123
YZN Yellow Zinc Chromate ASTM B633 SC3 Type II
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240
AL Aluminum Aluminum 6063-T6
Note: A minimum order may apply on special material and finishes.
Design Load (Steel & Stainless Steel)
The design loads given for strut beam loads are based on a simple beam condition using an allowable s
allowable stress results in a safety factor of 1.68. This is based upon virgin steel minimum yield strengt
during rolling to an average yield stress of 42,000 psi.
For aluminum channel loading multiply steel loading by a factor of 0.38.
Welding
Weld spacing is maintained between 21/2 inches (63.5 mm) and 4 inches (101.6 mm) on center. Through
welded channels and continuous monitoring of welding equipment, B-Line provides the most consistent
available today.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

14 Strut Systems
med on our modern rolling mills from 12 Ga. (2.6mm), 14 Ga. (1.9mm), and 16 Ga. (1.5mm) low
slot with inturned lips provides the ability to make attachments at any point.

n request.

l flexibility. A variety of pre-punched slot patterns eliminate the need for precise field measuring
adjustments in the alignment and bolt sizing.

3 mm) diameter hole patterns are available in our channels. These hole patterns provide an
eld drilling required for many applications.

losure Strips, knockout channels can be used to provide an economical U.L. listed surface
with 7/8” (22.2 mm) knockouts on 6” (152 mm) centers, allowing for perfect fixture alignment on

herwise noted) Steel: Plain & Pre-galvanized

a. (1.5)
y on special material and finishes.
el)
eam loads are based on a simple beam condition using an allowable stress of 25,000 psi. This
y factor of 1.68. This is based upon virgin steel minimum yield strength of 33,000 psi cold worked
stress of 42,000 psi.
ltiply steel loading by a factor of 0.38.

een 21/2 inches (63.5 mm) and 4 inches (101.6 mm) on center. Through high quality control testing of
monitoring of welding equipment, B-Line provides the most consistent combination channels

arentheses. Unless noted, all metric dimensions are in millimeters.

14 Strut Systems
 SELECTION CHART
for Channels, Materials and Hole Patterns
Material & Thickness * Channel Hole Pattern **
Channel Dimensions Stainless Steel
Steel Alum. Type Type SH S H17/8
304 316
Height Width /16” x 11/8” /32” x 3” /16”
9 13 9

1 2 3 4 slots on 2” slots diameter

Channel centers holes
Type

B11 31/4” (82.5) 15/8” (41.3) 12 Ga. 0.105 – – 1 1 1

B12 27/16” (61.9) 15/8” (41.3) 12 Ga. 0.105 – – 12 1 12
B22 15/8” (41.3) 15/8” (41.3) 12 Ga. 0.105 12 Ga. 12 Ga. 1234 1 3 123
B24 15/8” (41.3) 15/8” (41.3) 14 Ga. 0.080 14 Ga. 14 Ga. 1234 1 123
B26 15/8” (41.3) 15/8” (41.3) 16 Ga. – – – 1 1 1
B32 13/8” (34.9) 15/8” (41.3) 12 Ga. – 12 Ga. – 13 1 13
B42 1” (25.4) 15/8” (41.3) 12 Ga. – 12 Ga. – 13 1 13
B52 13
/16” (20.6) 15/8” (41.3) 12 Ga. – 12 Ga. 12 Ga. 134 1 1
B54 13
/16” (20.6) 15/8” (41.3) 14 Ga. 0.080 14 Ga. 14 Ga. 1234 1 1234
B56 13
/16” (20.6) 15/8” (41.3) 16 Ga. – – – 1 1 1
B62 13
/16” (20.6) 13
/16” (20.6) 18 Ga. – – – – – –
B72 13
/32” (10.3) 13
/16” (20.6) 18 Ga. – – – – – –
Channel & Combinations

The selection has been prepared to provide a reference for available channel, materials and hole patterns. Mater
various hole patterns are defined by numbers 1 thru 4.
Some stainless steel channels with hole patterns are available on special order only.
*Metric equivalent for thicknesses shown in chart. **1 - Steel
12 Ga. = 2.6 mm 18 Ga. = 1.2 mm 2 - Aluminum
14 Ga. = 1.9 mm .105 = 2.6 mm 3 - Type 304 Stainless Steel
16 Ga. = 1.5 mm .080 = 2.0 mm 4 - Type 316 Stainless Steel
Properties may vary due to commercial tolerances of the material.
Channel Part Numbering Example:
B22 SH - 120 SS4

Channel Type Hole Patterns Length Material/Finish

B11 SH (pg. 40) 120 GRN
B12 S (pg. 40) 240 GLV
B22 † H178 (pg. 40) HDG
B24 † TH (pg. 41) YZN
B26 K06 (pg. 41) SS4
B32 SHA (pg. 41) SS6
B42 S58 (pg. 42) AL
B52 † M (pg. 42)
B54 † H25 (pg. 43)
B56 H112 † (pg. 42)
B62 * Leave blank for no hole pattern B72

Reference page 14 for general fitting and standard finish specificat

Strut Systems 15
Hole Pattern **
TH KO6
9
/16” 7
/8”
diameter on diameter
17 / 8 ” knockouts
centers

– 1
– 12
1 12
– 12
– 1
– 1
– 1
– 1
– 12
– 1
– –
– –

rials and hole patterns. Material types available for

y.

el
el
and standard finish specifications.
 B11 Channel, Combinations & Load Data
B11 15/8”
• Thickness: 12 Gauge (2.6 mm) 3 /8
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
”
• Standard finishes: Plain, DURA-GREEN™, Pre- (9.5
Galvanized, Hot-Dipped Galvanized, Aluminum )
• Weight: 3.05 Lbs./Ft. (4.54 kg/m)
Y
31/4”
X
(82.5)

13
/16” Y
(20.6)

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B11 3.059 (4.55) .900 (5.81) 1.120 (46.63) .6472 (10.61) 1.116 (2.83) .4357 (18.14 .5362
B11A 6.119 (9.11) 1.800 (11.61 3 (266.10 1.967 (32.24) 1.885 (4.79) .8714 ) 1.0725
) 6.393 ) 1 (36.27
)
1
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

24 (609) B11 B11A 5130 (22.82) .029 (.73) 5130 (22.82) 5130
5130* (22.82) .005 (.13) 5130* (22.82) 5130*
36 (914) B11 B11A 3488 (15.51) .065 (1.65) 3488 (15.51) 3488
5130* (22.82) .017 (.43) 5130* (22.82) 5130*
48 (1219) B11 B11A 2616 (11.63) .117 (2.97) 2616 (11.63) 2616
5130* (22.82) .040 (1.01) 5130* (22.82) 5130*
60 (1524) B11 2093 (9.31) .183 (4.65) 2093 (9.31) 1908
B11A 5130* (22.82) .079 (2.00) 5130* (22.82) 5130*
72 (1829) B11 1744 (7.76) .263 (6.68) 1744 (7.76) 1325
B11A 5130* (22.82) .136 (3.45) 5130* (22.82) 5130*
84 (2133) B11 B11A 1495 (6.65) .358 (9.09) 1460 (6.49) 974
4552 (20.25) .191 (4.85) 4552 (20.25) 4552
96 (2438) B11 B11A 1308 (5.82) .468 (11.89) 1118 (4.97) 745
3983 (17.72) .250 (6.35) 3983 (17.72) 3983
108 (2743) B11 B11A 1163 (5.17) .592 (15.03) 884 (3.93) 589
3541 (15.75) .317 (8.05) 3541 (15.75) 3353
120 (3048) B11 B11A 1046 (4.65) .731 (18.57) 716 (3.18) 477
3187 (14.17) .391 (9.93) 3187 (14.17) 2716
144 (3657) B11 B11A 872 (3.88) 1.053 (26.74) 497 (2.21) 331
2656 (11.81) .563 (14.30) 2656 (11.81) 1886
168 (4267) B11 B11A 747 (3.32) 1.433 (36.40) 365 (1.62) 243
2276 (10.12) .766 (19.45) 2078 (9.24) 1386
192 (4877) B11 B11A 654 (2.91) 1.871 (47.52) 280 (1.24) 186
1992 (8.86) 1.001 (25.42) 1591 (7.08) 1061
216 (5486) B11 B11A 581 (2.58) 2.368 (60.15) 221 (0.98) 147
1770 (7.87) 1.267 (32.18) 1257 (5.59) 838
240 (6096) B11 B11A 523 (2.32) 2.924 (74.27) 179 (0.79) 119
1593 (7.08) 1.564 (39.72) 1018 (4.53) 679
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adeq
11 for further explanation). Actual yield point of cold rolled steel is 42,000 psi (289 MPa). To determine concentrated load capac
uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
Reference page 14 for general fitting and standard finish specifications.
16
 (41.3
3 /8 3/8”
)
” (9.5)
(9.5 9/32”
7/8”
) (7.1)
(22.2
)

31/4”
X
(82.5) 1.519
0
(38.6)

Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
in.3 cm3 in. cm

(8.79) .696 (1.77)

(17.58) .696 (1.77)

Cold-Formed Steel Design Manual.

oad @ Deflection = 1/240 Span

60 Span
kN Lbs. kN

5130 (22.82)
5130* (22.82)

3488 (15.51)
5130* (22.82)

2616 (11.63)
5130* (22.82)
 1908 (8.49)
5130* (22.82)

1325 (5.89)
5130* (22.82)

974 (4.33)
4552 (20.25)

745 (3.31)
3983 (17.72)

589 (2.62)
3353 (14.91)

477 (2.12)
2716 (12.08)

331 (1.47)
1886 (8.39)

243 (1.08)
1386 (6.16)

186 (0.83)
1061 (4.72)

147 (0.65)
838 (3.73)

119 (0.53)
679 (3.02)

accordance with MFMA, with adequate lateral bracing (see page

termine concentrated load capacity at mid span, multiply

.
Strut Systems
 B11 Beam & Column Loading Data
Y
31/4” (82.5)
X
X
61/2” (165.1) Y

13
/16” (20.6) Y
B11A 1
5
X
/
8
”

(
B11B Y
31/4
Channel & Combinations

1.519
0 ”
(38.6) (82.5
)

Wt. 6.10 Lbs./Ft. (9.08 kg/m) Wt. 6.10 Lbs./Ft. (9.08 kg/m)
COLUMN LOADING

Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

24 (609) B11 B11A 8190 (36.43) 4477 (19.91) 8446 (37.57) 7783 (34.62)
17701 (78.74) 8267 (36.77) 17778 (79.08) 17572 (78.16)

36 (914) B11 B11A 7311 (32.52) 4183 (18.61) 7838 (34.86) 6503 (28.93)
17416 (77.47) 8189 (36.42) 17590 (78.24) 17127 (76.18)

48 (1219) B11 B11A 6214 (27.64) 3783 (16.83) 7053 (31.37) 4988 (22.19)
17016 (75.69) 8079 (35.94) 17327 (77.07) 16503 (73.41)

60 (1524) B11 B11A 4988 (22.19) 3279 (14.58) 6140 (27.31) 3595 (15.99)
16503 (73.41) 7727 (34.37) 16988 (75.56) 15701 (69.84)

72 (1829) B11 B11A 3816 (16.97) 2444 (10.87) 5146 (22.89) 2790 (12.41)
15876 (70.62) 6160 (27.40) 16574 (73.72) 14721 (65.48)

84 (2133) B11 B11A 3063 (13.62) 1897 (8.44) 4133 (18.38) 2291 (10.19)
15135 (67.32) 4961 (22.07) 16084 (71.54) 13563 (60.33)

96 (2438) B11 B11A 2564 (11.40) 1532 (6.81) 3398 (15.11) 1953 (8.69)
14279 (63.51) 4045 (17.99) 15520 (69.03) 12226 (54.38)

108 (2743) B11 B11A 2213 (9.84) 1273 (5.66) 2886 (12.84) 1708 (7.60)
13310 (59.20) 3337 (14.84) 14880 (66.19) 10712 (47.65)

120 (3048) B11 B11A 1953 (8.69) 1081 (4.81) 2514 (11.18) 1522 (6.77)
12226 (54.38) 2784 (12.38) 14164 (63.00) 9019 (40.12)

144 (3657) B11 B11A 1591 (7.08) 816 (3.63) 2011 (8.94) 1251** (5.56)
9717 (43.22) 1990 (8.85) 12508 (55.64) 6257** (27.83)
168 (4267) B11 B11A 1347 (5.99) 642 (2.85) 1687 (7.50) 1058** (4.70)
7183 (31.95) 1464 (6.51) 10550 (46.93) 4597** (20.45)

192 (4877) B11 B11A 1167** (5.19) 519 (2.31) 1459 (6.49) 910** (4.05)
5499** (24.46) 1121 (4.98) 8330 (37.05) 3520** (15.66)

216 (5486) B11 1026** (4.56) 429 (1.91) 1285** (5.71) – –

B11A 4345** (19.33) 885 (3.93) 6582** (29.28) – –
240 (6096) B11 B11A 910** (4.05) 360 (1.60) 1148** (5.10) – –
3520** (15.66) 717 (3.19) 5331** (23.71) – –
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
Reference page 14 for general fitting and standard finish specifica
Strut Systems 17
Loading Data

31/4
X ”
15/8 (82.5
” )
(41.3
)

B11B
31/4
”
(82.5
)

bs./Ft. (9.08 kg/m)

aded @ C.G.)
K = 1.2
kN Lbs. kN

7311 (32.52)
17416 (77.47)

5612 (24.96)
16774 (74.61)

3816 (16.97)
15876 (70.62)

2790 (12.41)
14721 (65.48)

2213 (9.84)
13310 (59.20)

1846 (8.21)
11642 (51.78)

1591 (7.08)
9717 (43.22)

1401 (6.23)
7725 (34.36)

1251** (5.56)
6257** (27.83)

1026** (4.56)
4345** (19.33)
 859** (3.82)
3192** (14.20)

– –
– –
– –
– –
– –
– –
= radius of gyration.

and standard finish specifications.

 B12 Channel & Combinations
B12 15/8”
• Thickness: 12 Gauge (2.6 mm) 13
/16”
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) (20.6)
/
3
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized, Hot- 8
Dipped Galvanized, Aluminum ”
• Weight: 2.47 Lbs./Ft. (3.67 kg/m) (9
3 /8
(41.3 .5
) )
”
(9.5 /
9
7/8”
) 3
(22.2 2
) ”
27/16 X (7
” .1
(61.9) )
1.
1
Y 1
9
7
(2
8.
4)

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B12 2.484 (3.70) .731 (4.71) .5349 (22.26) .4061 (6.65) .856 (2.17) .3377 (14.06 .4156 (6.81)
B12A 4.969 (7.40) 1.462 (9.43) 2.903 (120.86 1.191 (19.52) 1.409 (3.58) .6756 ) .8315 (13.63)
6 ) 5 (28.12
)
Channel & Combinations

X
15/8
X ”
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed(41.3
Steel Design Manual.
Y
27/16” (61.9) )
47/8” Y
1.119
9
(28.4)
 (123.8) 1.119
X
9 (61.
X (28.4) 9)
13
/16” (20.6) Y
B12A 15/8” (41.3)

B12B
27/16”
Wt. 4.94 Lbs./Ft. (7.35 kg/m) Wt. 4.94 Lbs./Ft. (7.35 kg/m)
Reference page 14 for general fitting and standard finish specifications.
18
 Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
in.3 cm3 in. cm

(6.81) .680 (1.73)

(13.63) .680 (1.73)

31/4
X ”
(82.5
15/8 )
”
-Formed(41.3
Steel Design Manual.
)
t. 4.94 Lbs./Ft. (7.35 kg/m)

Strut Systems
 B12 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B12 3880 (17.26) .009 (.23) 3880 (17.26) 3880

B12A 3880* (17.26) .001 (.02) 3880* (17.26) 3880*
24 (609) B12 B12A 3273 (14.56) .038 (.96) 3273 (14.56) 3273
3880* (17.26) .008 (.20) 3880* (17.26) 3880*
36 (914) B12 B12A 2182 (9.70) .086 (2.18) 2182 (9.70) 2182
3880* (17.26) .028 (.71) 3880* (17.26) 3880*
48 (1219) B12 B12A 1636 (7.28) .153 (3.88) 1636 (7.28) 1421
3880* (17.26) .067 (1.70) 3880* (17.26) 3880*
60 (1524) B12 B12A 1309 (5.82) .240 (6.09) 1309 (5.82) 909
3847* (17.11) .130 (3.30) 3847* (17.11) 3847*
72 (1829) B12 B12A 1091 (4.85) .345 (8.76) 947 (4.21) 632
3206 (14.26) .188 (4.77) 3206 (14.26) 3206
84 (2133) B12 B12A 935 (4.16) .470 (11.94) 696 (3.09) 464
2748 (12.22) .255 (6.48) 2748 (12.22) 2509
96 (2438) B12 B12A 818 (3.64) .614 (15.59) 533 (2.37) 355
2404 (10.69) .334 (8.48) 2404 (10.69) 1921
108 (2743) B12 B12A 727 (3.23) .777 (19.73) 421 (1.87) 281
2137 (9.50) .422 (10.72) 2137 (9.50) 1518
120 (3048) B12 B12A 655 (2.93) .959 (24.36) 341 (1.52) 227
1924 (8.56) .521 (13.23) 1844 (8.20) 1229
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adeq
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B12 B12A 10140 (45.10) 4752 (21.14) 10247 (45.58) 9965 (44.32)
20820 (92.61) 8023 (35.69) 20854 (92.76) 20763 (92.36)

24 (609) B12 B12A 9244 (41.12) 4514 (20.08) 9639 (42.87) 8629 (38.38)
20519 (91.27) 7956 (35.39) 20655 (91.88) 20293 (90.27)

36 (914) B12 B12A 7933 (35.29) 4137 (18.40) 8711 (35.75) 6786 (30.18)
20017 (89.04) 7844 (34.89) 20324 (90.40) 19509 (86.78)

48 (1219) B12 B12A 6386 (28.40) 3638 (16.18) 7562 (33.64) 4785 (21.28)
19315 (85.92) 7688 (34.20) 19861 (88.34) 18412 (81.90)
60 (1524) B12 B12A 4785 (21.28) 2963 (13.18) 6285 (27.96) 3523 (15.67)
18412 (81.90) 6941 (30.87) 19265 (85.69) 17002 (75.63)

72 (1829) B12 B12A 3717 (16.53) 2197 (9.77) 4964 (22.08) 2806 (12.48)
17309 (76.99) 5334 (23.73) 18536 (82.45) 15278 (67.96)

84 (2133) B12 B12A 3052 (13.57) 1717 (7.64) 3994 (17.76) 2345 (10.43)
16005 (71.19) 4176 (18.57) 17675 (78.62) 13240 (58.89)

96 (2438) B12 B12A 2600 (11.56) 1391 (6.19) 3350 (14.90) 2019 (8.98)
14500 (64.50) 3328 (14.80) 16682 (74.20) 10889 (48.43)

108 (2743) B12 B12A 2271 (10.10) 1155 (5.14) 2893 (12.87) 1773 (7.88)
12795 (56.91) 2692 (11.97) 15556 (69.19) 8610 (38.30)

120 (3048) B12 B12A 2019 (8.98) 977 (4.34) 2553 (11.35) 1577 (7.01)
10889 (48.43) 2202 (9.79) 14298 (63.60) 6974 (31.02)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 19
Loading Data
ad @ Deflection = 1/240 Span
Span
kN Lbs. kN

3880 (17.26)
3880* (17.26)

3273 (14.56)
3880* (17.26)

2182 (9.70)
3880* (17.26)

1421 (6.32)
3880* (17.26)

909 (4.04)
3847* (17.11)

632 (2.81)
3206 (14.26)

464 (2.06)
2509 (11.16)

355 (1.58)
1921 (8.54)

281 (1.25)
1518 (6.75)

227 (1.01)
1229 (5.47)

ordance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

9756 (43.40)
20694 (92.05)

7933 (35.29)
20017 (89.04)

5572 (24.78)
18889 (84.02)

3717 (16.53)
17309 (76.99)
 2806 (12.48)
15278 (67.96)

2271 (10.10)
12795 (56.91)

1913 (8.51)
9884 (43.96)

1650 (7.34)
7567 (33.66)

1446 (6.43)
5979 (26.59)

1279** (5.69)
4843** (21.54)

= radius of gyration. r

and standard finish specifications.

 8
1 ”
5

/ (
8 9
” .
B22 5
• Thickness: 12 Gauge (2.6 mm) )
9
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized, /
3
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum 2
• Weight: 1.90 Lbs./Ft. (2.83 kg/m) ”
3
/8” (9.5) (
4
(
1
7
.
.
3
1
)
7 )
X /
8
”

15/8” X ( .7
(41.3) Y 2 25
2
13
/16”2 (1
(20.6). 8.
2
) 4)
Y

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B22 B22A 1.910 (2.84) .562 (3.62) .1912 (7.96) .2125 (3.48) .583 (1.48) .2399 (9.99) .2953 (4.84)
B22X 3.820 (5.69) 1.124 (7.25) .9732 (40.51) .5989 (9.81) .931 (2.36) .4798 (19.97 .5905 (9.68)
6.649 (9.89) 1.956 (12.62 4.148 (172.67 1.701 (27.89) 1.456 (3.70) 1.102 ) 1.2027 (19.71)
) ) (45.88
4 9 3
)
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y

Y
B22A (41.3)
Wt. 3.80 Lbs./Ft. (5.65 kg/m)
Reference page 14 for general fitting and standard finish specifications.
20

15/8”
(41.3)

X 3X
1/4”

13/16

”
(20.6)
15/8”
 Y - Y Axis

ection Radius of
Modulus (S) Gyration (r)
n.3 cm3 in. cm

(4.84) .653 (1.66)

(9.68) .653 (1.66)
(19.71) .751 (1.91)

ormed Steel Design Manual.

(41.3)

Strut Systems

15/8”
(41.3)

(82.
31/4” 5)
 1.3833 15/8” 1.3540
(35.1) (34.4)
Y (41.3)

Y 31/4” Y Y
31/4” X (82.5) 31/4”
X (82.5) X (82.5)
X X
X X

15/8” Y 15/8” Y Y 31/4” (82.5) 1.3250 .725 Y

(41.3) 31/4” (41.3) 31/4” (33.7) (18.4)

B22AD3
B22A3 (82.5) B22A4 (82.5) B22B

Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 7.60 Lbs./Ft. (11.31 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m)
Channel & Combinations

Y
X 31/4”
(82.5)
X
1.924
Y 9
15 /8 31 /4 (48.9)
” ”
(41.3
(82.5 (41.3)
) B22B3 B22C B22C3
)
Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lb
15/8” 27/16”
(41.3) (61.9) 1.5813
(40.2)

Y2 /16
7
Y Y Y
”
31/4” 47/8” 31/4” (61.9)
X
X (82.5) 1.23
X (123.8) X (82.5) Y 13/167”
1.16 4 /8”
8
1 X (123.
X X (31.3 1.73
(29.7 1.73 Y
0 8)
.769 Y X ) Y ) .769 4
Y X 0 Y X (43.9 (101.6) .10
(19.5) (43.9 .842 (19.5)
)
” 4
X ) X 5 X (2.
1.795 .10 2” Y .10
Y 6)
(45.6) 5
5 (50.8 4”
213/16” (2.6 ) (101.
(2.6
15/8)” (21.4) 5 ) 1 / 8” .918
Y (20.6) 5

(71. 6) 7/16
(41.3) (23. (11.1) 1
B22LPL 4) 1 / 8”
B22PL (41.3)
3) ” / 8”
1.835
B22D B22D3 (41.3) B22E B22E3
Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./Ft. (8.48 kg/m) Wt. 3.80 Lbs./Ft. (5.65 kg/m) Wt. 5.70 Lbs./F
Wt. 2.90 Lbs./Ft. (4.31 kg/m) Wt. 3.35 Lbs./Ft. (4.98 kg/m) B22X
(46.6)

Wt. 6.70 Lbs./Ft.

Reference page 14 for general fitting and standard finish specificat
Strut Systems 21
 27/16
”
15/8” Y (61.9)
(41.3)
Y
47/8”
31/4”
X X
X X (82.5) (123.8)
Y
Y
13/16
.841
” 15/8 6
(20.6) (21.4 15 /8
” ) ”
3540 58
4.4) 1 /
”
Y (41.3) 31/4”
X (82.5)

.725 Y
15/8”
(18.4) (41.3)
B22B

Wt. 3.80 Lbs./Ft. (5.65 kg/m)

B22C3 (41.3)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

2.467
(62.7)

Y2 /16
7

”
X
(61.9) X 47/8”
13
/167” (123.8)
4 /8” Y
(123.
8)
.10
4
(2.
6)

(20.6) 5
7/16
(11.1) 1 / 8”
”
1.835
B22E3 (41.3)

Wt. 5.70 Lbs./Ft. (8.48 kg/m)

(46.6)
B22X
Wt. 6.70 Lbs./Ft. (9.97 kg/m)
standard finish specifications.
 27/16
”
(61.9)

47/8”
X
(123.8)
 B22 Beam Loading Data
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B22 2610 (11.61) .014 (.35) 2610 (11.61)

B22A B22X 2610* (11.61) .002 (.05) 2610* (11.61)
5790* (25.75) .001 (.02) 5790* (25.75)

18 (457) B22 B22A 2269 (10.09) .031 (.79) 2269 (10.09)

B22X 2610* (11.61) .007 (.18) 2610* (11.61)
5790* (25.75) .003 (.07) 5790* (25.75)

24 (609) B22 1702 (7.57) .056 (1.42) 1702 (7.57)

B22A B22X 2610* (11.61) .017 (.43) 2610* (11.61)
5790* (25.75) .008 (.20) 5790* (25.75)

30 (762) B22 B22A 1361 (6.05) .087 (2.21) 1361 (6.05)

B22X 2610* (11.61) .033 (.84) 2610* (11.61)
5790* (25.75) .017 (.73) 5790* (25.75)

36 (914) B22 B22A 1135 (5.05) .126 (3.20) 1135 (5.05)

B22X 2610* (11.61) .057 (1.45) 2610* (11.61)
5790* (25.75) .029 (.73) 5790* (25.75)

42 (1067) B22 B22A 972 (4.32) .172 (4.37) 972 (4.32)

B22X 2610* (11.61) .091 (2.31) 2610* (11.61)
5790* (25.75) .046 (1.17) 5790* (25.75)

48 (1219) B22 B22A 851 (3.78) .224 (5.69) 758 (3.37)

B22X 2405 (10.70) .125 (3.17) 2405 (10.70)
5790* (25.75) .068 (1.73) 5790* (25.75)

54 (1371) B22 B22A 756 (3.36) .284 (7.21) 599 (2.66)

B22X 2138 (9.51) .158 (4.01) 2138 (9.51)
5790* (25.75) .097 (2.46) 5790* (25.75)

60 (1524) B22 B22A 681 (3.03) .351 (8.91) 485 (2.16)

B22X 1924 (8.56) .195 (4.95) 1924 (8.56)
5645 (25.11) .130 (3.30) 5645 (25.11)

66 (1676) B22 B22A 619 (2.75) .424 (10.77) 401 (1.78)

B22X 1749 (7.78) .236 (5.99) 1749 (7.78)
5132 (22.83) .158 (4.01) 5132 (22.83)

72 (1829) B22 B22A 567 (2.52) .505 (12.83) 337 (1.50)

B22X 1603 (7.13) .281 (7.14) 1603 (7.13)
4704 (20.92) .188 (4.77) 4704 (20.92)

78 (1981) B22 B22A 524 (2.33) .593 (15.06) 287 (1.27)

B22X 1480 (6.58) .330 (8.38) 1455 (6.47)
4342 (19.31) .220 (5.59) 4342 (19.31)

84 (2133) B22 486 (2.16) .687 (17.45) 248 (1.10)

B22A B22X 1374 (6.11) .383 (9.73) 1255 (5.58)
4032 (17.93) .255 (6.48) 4032 (17.93)

90 (2286) B22 B22A 454 (2.02) .789 (20.04) 216 (0.96)

B22X 1283 (5.71) .440 (11.17) 1093 (4.86)
3763 (16.74) .293 (7.44) 3763 (16.74)

96 (2438) B22 B22A 425 (1.89) .898 (22.81) 190 (0.84)

B22X 1202 (5.35) .500 (12.70) 961 (4.27)
3528 (15.69) .334 (8.48) 3528 (15.69)

102 (2591) B22 B22A 400 (1.78) 1.013 (25.73) 168 (0.75)
B22X 1132 (5.03) .565 (14.35) 851 (3.78)
3320 (14.77) .377 (9.57) 3320 (14.77)
 108 (2743) B22 378 (1.68) 1.136 (28.85) 150 (0.67)
B22A B22X 1069 (4.75) .633 (16.08) 759 (3.37)
3136 (13.95) .422 (10.72) 3136 (13.95)

114 (2895) B22 358 (1.59) 1.266 (32.15) 134 (0.59)

B22A B22X 1013 (4.50) .706 (17.93) 681 (3.03)
2971 (13.21) .471 (11.96) 2971 (13.21)

120 (3048) B22 B22A 340 (1.51) 1.403 (35.63) 121 (0.54)
B22X 962 (4.28) .782 (19.86) 615 (2.73)
2822 (12.55) .521 (13.23) 2706 (12.04)
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adeq
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at
mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8. *Failure determined by weld shear.
Reference page 14 for general fitting and standard finish specifications.
22
oad @ Deflection = 1/240 Span
n
kN Lbs. kN

2610 (11.61)
2610* (11.61)
5790* (25.75)

2269 (10.09)
2610* (11.61)
5790* (25.75)

1702 (7.57)
2610* (11.61)
5790* (25.75)

1294 (5.75)
2610* (11.61)
5790* (25.75)

899 (4.00)
2610* (11.61)
5790* (25.75)

660 (2.93)
2610* (11.61)
5790* (25.75)

505 (2.24)
2405 (10.70)
5790* (25.75)

399 (1.77)
2024 (9.00)
5790* (25.75)

323 (1.44)
1640 (7.29)
5645 (25.11)

267 (1.19)
1355 (6.03)
5132 (22.83)

225 (1.00)
1139 (5.06)
4704 (20.92)

191 (0.85)
970 (4.31)
4270 (18.99)

165 (0.73)
837 (3.72)
3682 (16.38)

144 (0.64)
729 (3.24)
3207 (14.26)

126 (0.56)
640 (2.85)
2819 (12.54)

112 (0.50)
567 (2.52)
2497 (11.11)
 100 (0.44)
506 (2.25)
2227 (9.90)

90 (0.40)
454 (2,02)
1999 (8,89)

81 (0.36)
410 (1.82)
1804 (8.02)

accordance with MFMA, with adequate lateral bracing (see page 11

centrated load capacity at
ned by weld shear.
ns.
Strut Systems
 B22 Column Loading Data
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

B22 10454 (46.50) 4276 (19.12) 10598 (47.14) 10222 (45.47)

B22A 21625 (96.19) 7002 (31.14) 21677 (96.42) 21539 (95.81)
12 (305)
B22X 46948 (208.83) 18975 (84.40) 47061 (209.34) 46761 (208.00)

18 (457) B22 9950 (44.26) 4153 (18.47) 10253 (45.62) 9481 (42.17)
B22A 21433 (95.34) 6959 (30.95) 21551 (95.86) 21239 (94.47)
B22X 46531 (206.98) 18859 (83.90) 46787 (208.12) 46110 (205.11)

24 (609) B22 9311 (41.42) 3993 (17.76) 9801 (43.60) 8582 (38.17)
B22A 21164 (94.14) 6898 (30.68) 21373 (95.07) 20819 (92.61)
B22X 45947 (204.38) 18693 (84.44) 46401 (206.40) 45198 (201.05)

30 (762) B22 8582 (38.17) 3802 (16.91) 9268 (41.22) 7601 (33.81)
B22A 20819 (92.61) 6821 (30.34) 21145 (94.06) 20279 (90.20)
B22X 45198 (201.05) 18485 (82.22) 45906 (204.20) 44026 (195.84)

36 (914) B22 7801 (34.70) 3589 (15.96) 8676 (38.59) 6595 (28.33)
B22A 20397 (90.73) 6728 (29.93) 20866 (92.81) 19619 (87.27)
B22X 44282 (196.97) 18233 (81.10) 45300 (201.50) 42593 (189.46)

42 (1067) B22 6998 (31.13) 3360 (14.94) 8048 (35.80) 5595 (24.89)
B22A 19898 (88.51) 6620 (29.45) 20537 (91.33) 18840 (83.80)
B22X 43198 (192.15) 17940 (79.80) 44586 (198.33) 40901 (181.94)

48 (1219) B22 6193 (27.55) 3118 (13.87) 7401 (32.92) 4718 (20.99)
B22A 19322 (85.95) 6496 (28.89) 20157 (89.66) 17940 (79.80)
B22X 41948 (186.59) 17604 (78.30) 43761 (194.57) 38948 (173.25)

54 (1371) B22 5392 (23.98) 2864 (12.74) 6746 (30.01) 4090 (18.19)
B22A 18669 (83.04) 6263 (27.86) 19276 (87.74) 16920 (75.26)
B22X 40530 (180.28) 16973 (75.50) 42825 (190.49) 36733 (163.39)

60 (1524) B22 4718 (20.99) 2631 (11.70) 6093 (27.10) 3616 (16.08)
B22A 17940 (79.80) 5340 (23.75) 19244 (85.60) 15781 (70.20)
B22X 38948 (173.25) 14471 (64.37) 41779 (185.84) 34260 (152.39)

66 (1676) B22 4202 (18.69) 2434 (10.83) 5441 (24.20) 3242 (14.42)
B22A 17134 (76.21) 4587 (20.40) 18712 (83.23) 14521 (64.59)
B22X 37198 (165.46) 12431 (55.29) 40624 (180.70) 31525 (140.23)

72 (1829) B22 3791 (16.86) 2264 (10.07) 4869 (21.66) 2936 (13.06)
B22A 16251 (72.29) 3968 (17.65) 18129 (80.64) 13141 (58.45)
B22X 35281 (156.94) 10753 (47.83) 39358 (175.07) 28529 (126.90)

78 (1981) B22 3456 (15.37) 2116 (9.41) 4412 (19.62) 2680 (11.92)
B22A 15291 (68.02) 3456 (15.37) 17496 (77.82) 11642 (51.78)
B22X 33197 (147.67) 9366 (41.66) 37984 (168.96) 25275 (112.43)

84 (2133) B22 3176 (14.13) 1984 (8.82) 4037 (17.96) 2461 (10.95)
B22A 14255 (63.41) 3028 (13.47) 16812 (74.78) 10076 (44.82)
B22X 30947 (137.66) 8206 (36.50) 36499 (162.35) 21875 (97.30)

90 (2286) B22 2936 (13.06) 1867 (8.30) 3724 (16.56) 2270 (10.10)
B22A 13141 (58.45) 2667 (11.86) 16077 (71.51) 8778 (39.04)
B22X 28529 (126.90) 7227 (32.15) 34903 (155.25) 19057 (84.77)

96 (2438) B22 2728 (16.58) 1761 (7.83) 3456 (15.37) 2101 (9.34)
B22A 11951 (53.16) 2359 (10.49) 15291 (68.02) 7715 (34.32)
B22X 25945 (115.41) 6393 (28.44) 33197 (147.67) 16749 (74.50)
 102 (2591) B22 2545 (11.32) 1664 (7.40) 3225 (14.34) 1951 (8.68)
B22A 10678 (47.50) 2093 (9.31) 14455 (64.30) 6834 (30.40)
B22X 23182 (103.12) 5672 (25.23) 31382 (139.59) 14836 (65.99)

108 (2743) B22 2381 (10.59) 1575 (7.00) 3022 (13.44) 1816 (8.08)
B22A 9524 (42.36) 1867 (8.30) 13568 (60.35) 6096 (27.11)
B22X 20676 (91.97) 5059 (22.50) 29456 (131.03) 13234 (58.87)

114 (2895) B22 2234 (9.94) 1494 (6.64) 2842 (12.64) 1694 (7.53)
B22A 8548 (38.02) 1675 (7.45) 12630 (56.18) 5471 (24.33)
B22X 18558 (82.55) 4539 (20.19) 27420 (121.97) 11877 (52.83)

120 (3048) B22 2101 (9.34) 1418 (6.31) 2680 (11.92) 1583** (7.04)
B22A 7715 (34.32) 1512 (6.72) 11642 (51.78) 4937 (21.96)
B22X 16749 (74.50) 4097 (18.22) 25275 (112.43) 10718 (47.67)
Channel & Combinations

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration.
r
Reference page 14 for general fitting and standard finish specific
Strut Systems 23
oading Data
ded @ C.G.)
K = 1.2
N Lbs. kN

9950 (44.26)
21433 (95.34)
46531 (206.98)
8955 (39.83)
21001 (93.42)
45593 (202.81)
7801 (3470)
20397 (9073)
44282 (196.97)
6595 (29.33)
19619 (87.27)
42593 (189.46)
5392 (23.98)
18669 (83.04)
40530 (180.28)
4444 (19.77)
17546 (78.05)
38092 (169.44)
3791 (16.86)
16251 (72.29)
35281 (156.94)
3310 (14.72)
14782 (65.75)
32092 (142.75)
2936 (13.06)
13141 (58.45)
28529 (126.90)
2634 (11.71)
11328 (50.39)
24593 (109.39)
2381 (10.59)
9524 (42.36)
20676 (91.97)

2166 (9.63)
8115 (36.10)
17617 (78.36)

1980 (8.81)
6998 (31.13)
15192 (67.58)

1816 (8.08)
6096 (27.11)
13234 (58.87)

1671 (7.43)
5357 (23.83)
11630 (51.73)
 1542* (6.34)
* (21.11)
4746 (45.83)
10303
1426* (68.60)
* (18.83)
4233 (40.88)
9190
1322* (5.88)
* (16.90)
3799* (36.68)
*
1228* (5.46)
* (15.25)
3429* (33.11)
*

radius of gyration.

d standard finish specifications.

 B24 Channel & Combinations
B24
• Thickness: 14 Gauge (1.9 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
• Weight: 1.40 Lbs./Ft. (2.08 kg/m)
15/8”
(41.3)

3
/ 8” /
3

(9.5) 8”
X (9.
15/8” 5)
(41.3)

/
9

32
”
13
/16” Y

(20.6)

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B24 1.442 (2.15) .424 (2.74) .1494 (6.22) .1670 (2.74) .594 (1.51) .1857 (7.73) .2286 (3.75)
B24A 2.884 (4.29) .848 (5.47) .7514 (31.28) .4624 (7.58) .941 (2.39) .3713 (15.4 .4570 (7.49)
5)
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
31/4”
(82.5)
X

Y
31/4”
X (82.5)
X X
X
Y
1 / 8”
5
13
/16” (20.6) Y 15/8” .730 (41.3) 13
/16” (20.6)
15/8” (41.3) (18.6)
B24A B24C
(41.3) B24B
15/8”
(41.3)

Wt. 2.80 Lbs./Ft. (4.16 kg/m) Wt. 2.80 Lbs./Ft. (4.16 kg/m) Wt. 2.80 Lbs./F
Reference page 14 for general fitting and standard finish specifications.
24
 Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
n.3 cm3 in. cm

(3.75) .662 (1.68)

(7.49) .662 (1.68)

ormed Steel Design Manual.

15/8”
(41.3)
Y

X
X 31/4”
(82.5)
Y
13
/16” (20.6)
B24C
15/8”
(41.3)

Wt. 2.80 Lbs./Ft. (4.16 kg/m)

Strut Systems
 B24 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection =
Beam Span In. Uniform Load and Deflection Lbs. kN 1/240 Span 1/360 Span Lbs.
Channel Style
mm In. mm kN Lbs. kN

12 (305) B24 B24A 1750 (7.78) .014 (.35) 1750 (7.78) 1750
1750* (7.78) .002 (.05) 1750* (7.78) 1750*
24 (609) B24 B24A 1379 (6.13) .057 (1.45) 1379 (6.13) 1379
1750* (7.78) .014 (.35) 1750* (7.78) 1750*
36 (914) B24 B24A 919 (4.09) .128 (3.25) 919 (4.09) 720
1750* (7.78) .048 (1.22) 1750* (7.78) 1750*
48 (1219) B24 B24A 689 (3.06) .227 (5.76) 607 (2.70) 405
1750* (7.78) .115 (2.92) 1750* (7.78) 1750*
60 (1524) B24 B24A 551 (2.45) .355 (9.02) 389 (1.73) 259
1518 (6.75) .195 (4.95) 1518 (6.75) 1294
72 (1829) B24 B24A 460 (2.04) .511 (12.98) 270 (1.20) 180
1265 (5.63) .281 (7.14) 1265 (5.63) 898
84 (2133) B24 B24A 394 (1.75) .695 (17.65) 198 (0.88) 132
1084 (4.82) .383 (9.73) 990 (4.40) 660
96 (2438) B24 B24A 345 (1.53) .908 (23.06) 152 (0.67) 101
949 (4.22) .500 (12.70) 758 (3.37) 505
108 (2743) B24 306 (1.36) 1.149 (29.18) 120 (0.53) 80
B24A 843 (3.75) .633 (16.08) 599 (2.66) 399
120 (3048) B24 B24A 276 (1.23) 1.419 (36.04) 97 (0.43) 65
759 (3.37) .782 (19.86) 485 (2.16) 323
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B24 B24A 6441 (28.65) 3077 (13.69) 6509 (28.95) 6330 (28.16)
13212 (58.77) 4988 (22.19) 13237 (58.88) 13171 (58.59)

24 (609) B24 B24A 5874 (26.13) 2896 (12.88) 6124 (27.24) 5483 (24.39)
12993 (57.79) 4924 (21.90) 13092 (58.23) 12828 (57.06)

36 (914) B24 B24A 5038 (22.41) 2619 (11.65) 5535 (24.62) 4302 (19.13)
12627 (56.17) 4819 (21.43) 12851 (57.16) 12256 (54.52)

48 (1219) B24 B24A 4043 (17.98) 2272 (10.10) 4800 (21.35) 3008 (13.38)
12115 (53.89) 4675 (20.79) 12512 (55.65) 11456 (50.96)
60 (1524) B24 B24A 3008 (13.38) 1873 (8.33) 3978 (17.69) 2200 (9.78)
11456 (50.96) 4020 (17.88) 12078 (53.72) 10427 (46.38)

72 (1829) B24 B24A 2324 (10.34) 1562 (6.95) 3123 (13.89) 1740 (7.74)
10651 (47.38) 3048 (13.56) 11546 (51.36) 9169 (40.78)

84 (2133) B24 B24A 1898 (8.44) 1340 (5.96) 2502 (11.13) 1444 (6.42)
9700 (43.15) 2362 (10.50) 10918 (48.56) 7683 (34.17)

96 (2438) B24 B24A 1608 (7.15) 1175 (5.22) 2089 (9.29) 1236 (5.50)
8602 (38.26) 1866 (8.30) 10194 (45.34) 6024 (26.79)

108 (2743) B24 B24A 1397 (6.21) 1046 (4.65) 1796 (7.99) 1078 (4.79)
7358 (32.73) 1498 (6.66) 9373 (41.69) 4760 (21.17)

120 (3048) B24 B24A 1236 (5.50) 942 (4.19) 1578 (7.02) 953** (4.24)
6024 (26.79) 1216 (5.41) 8455 (37.61) 3856 (17.15)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 25
Loading Data
ad @ Deflection =
1/360 Span Lbs.
s. kN

1750 (7.78)
1750* (7.78)

1379 (6.13)
1750* (7.78)

720 (3.20)
1750* (7.78)

405 (1.80)
1750* (7.78)

259 (1.15)
1294 (5.75)

180 (0.80)
898 (3.99)

132 (0.59)
660 (2.93)

101 (0.45)
505 (2.24)

80 (0.35)
399 (1.77)

65 (0.29)
323 (1.44)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

6198 (27.57)
13121 (58.36)

5038 (22.41)
12627 (56.17)

3516 (15.64)
11804 (52.51)

2324 (10.34)
10651 (47.38)
 1740 (7.74)
9169 (40.78)

1397 (6.21)
7358 (32.73)

1168 (5.19)
5464 (24.30)

1000 (4.45)
4184 (18.61)

870** (3.87)
3306 (14.70)

764** (3.40)
2677** (11.91)

= radius of gyration. r

and standard finish specifications.

 B26 Channel & Combinations
B26
• Thickness: 16 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized
• Weight: 1.12 Lbs./Ft. (1.66 kg/m)

15/8”3 (41.
3 /8
/8” 3)
SECTION PROPERTIES X - X Axis Y-Y
” Axis
7/8”
(9.5) (9.5
9/32 (22.
Areas of Moment of Section Radius of ” Moment of Section
)
2)
Weight Section Inertia (I) Modulus (S) Gyration
(7.1)(r) Inertia (I) Modulus27/(S)
64”
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 Y4
cm in.3(10.7)
cm3
lbs./ft. kg/m
X 15/8” X
.7745
B26 1.234 (1.84) .363 (2.34) .1337 (5.57) .1581 (2.59) .607 (1.54) .1564 (6.51) .1925
(19.7)
(2.51) .3128 (13.02 .3850 27/64”
B26A 2.467 (3.67) .726 (4.68) .7086 (29.49) .4361 (7.15) .988
) (10.7)
13/16
Y
Channel & Combinations

”
(20.6)

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y 15/8”
Y 1 /8
5
(41.3)
” 31/4”
(41.3
)
31 /4
X ”
(82.5
X ) X
(82.5) (82.5)
X X
Y Y Y
13/16 13/16”
.774
” (19.7) 15/8” (20.6)
(20.6) 15 /8
B26A ” (41.3) B26B (41.3) B26C

Wt. 2.24 Lbs./Ft. (3.33 kg/m) Wt. 2.24 Lbs./Ft. (3.33 kg/m) Wt. 2.24 Lbs./Ft. (3.3
Reference page 14 for general fitting and standard finish specifications.
26
 3 /8
Y-Y
” Axis
(9.5
Section
) Radius of
Modulus27/(S)
64” Gyration (r)
in.(10.7)
3
cm3 in. cm
15/8” (41.
(3.15 .656 (1.67)
27)/64”3) (1.67)
.656
(10.7) (6.31
)

old-Formed Steel Design Manual.

Y 15/8”
(41.3)
X

31/4”
(82.5)
X

13/16”

(20.6) 15/8”
B26C (41.3)

Wt. 2.24 Lbs./Ft. (3.33 kg/m)

.
Strut Systems
 B26 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B26 B26A 1220 (5.43) .014 (.35) 1220 (5,43) 1220
1220* (5.43) .001 (.02) 1220* (5,43) 1220*
24 (609) B26 B26A 1163 (5.17) .057 (1.45) 1163 (5,17) 1163
1220* (5.43) .012 (.30) 1220* (5,43) 1220*
36 (914) B26 B26A 775 (3.45) .128 (3.25) 775 (3,45) 603
1220* (5.43) .040 (1.01) 1220* (5,43) 1220*
48 (1219) B26 B26A 581 (2.58) .228 (5.79) 509 (2,264) 339
1220* (5.43) .096 (2.44) 1220* (5,43) 1220*
60 (1524) B26 B26A 465 (2.07) .357 (9.07) 326 (1,45) 217
1220* (5.43) .188 (4.77) 1220* (5,43) 1076
72 (1829) B26 B26A 388 (1.72) .514 (13.05) 226 (1,45) 151
1052 (4.68) .281 (7.14) 1052 (4,68) 747
84 (2133) B26 B26A 332 (1.48) .699 (17.75) 166 (0.74) 111
902 (4.01) .383 (9.73) 824 (3.66) 549
96 (2438) B26 B26A 291 (1.29) .913 (23.19) 127 (0.56) 85
789 (3.51) .500 (12.70) 631 (2.81) 420
108 (2743) B26 258 (1.15) 1.156 (29.36) 101 (0.45) 67
B26A 702 (3.12) .633 (16.08) 498 (2.21) 332
120 (3048) B26 B26A 233 (1.03) 1.427 (36.24) 81 (0.36) 54
631 (2.17) .782 (19.86) 404 (1.80) 269
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING

Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B26 B26A 4002 (17.80) 2216 (9.86) 4032 (17.93) 3952 (17.58)
8151 (36.26) 3630 (16.15) 8163 (36.31) 8133 (36.18)

24 (609) B26 B26A 3740 (16.63) 2109 (9.38) 3857 (17.16) 3554 (15.81)
8051 (35.81) 3591 (15.97) 8096 (36.01) 7975 (35.47)

36 (914) B26 B26A 3336 (14.49) 1941 (8.63) 3579 (15.92) 2962 (13.17)
7883 (35.06) 3528 (15.69) 7986 (35.52) 7713 (34.31)

48 (1219) B26 B26A 2828 (12.58) 1725 (7.61) 3217 (14.31) 2251 (10.01)
7648 (34.02) 3441 (15.30) 7831 (34.83) 7346 (32.67)
60 (1524) B26 B26A 2251 (10.01) 1469 (6.53) 2793 (12.42) 1603 (7.13)
7346 (32.67) 3066 (13.64) 7631 (33.94) 6874 (30.58)

72 (1829) B26 B26A 1705 (7.58) 1203 (5.35) 2326 (10.34) 1233 (5.48)
6977 (31.03) 2385 (10.61) 7388 (32.86) 6298 (28.01)

84 (2133) B26 B26A 1358 (6.04) 1011 (4.50) 1851 (8.23) 1003 (4.46)
6541 (29.09) 1884 (8.38) 7100 (31.58) 5616 (24.98)

96 (2438) B26 B26A 1129 (5.02) 871 (3.87) 1513 (6.73) 847 (3.77)
6038 (26.86) 1512 (6.72) 6767 (30.10) 4830 (21.48)

108 (2743) B26 B26A 967 (4.30) 766 (3.41) 1277 (5.68) 734 (3.26)
5467 (24.32) 1231 (5.47) 6391 (28.43) 3940 (17.52)

120 (3048) B26 B26A 847 (3.77) 684 (3.04) 1105 (4.91) 648 (2.88)
4830 (21.48) 1015 (4.51) 5970 (26.55) 3192 (14.20)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 27
Loading Data
ad @ Deflection = 1/240 Span
Span
kN Lbs. kN

1220 (5.43)
1220* (5.43)

1163 (5.17)
1220* (5.43)

603 (2.68)
1220* (5.43)

339 (1.51)
1220* (5.43)

217 (0.96)
1076 (4.78)

151 (0.96)
747 (3.32)

111 (0.49)
549 (2.44)

85 (0.38)
420 (1.87)

67 (0.30)
332 (1.48)

54 (0.24)
269 (1.19)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

3891 (17.31)
8109 (36.07)

3336 (14.84)
7883 (35.06)

2546 (11.32)
7505 (33.38)

1705 (7.58)
6977 (31.03)
 1233 (5.48)
6298 (28.01)

967 (4.30)
5467 (24.32)

797 (3.54)
4486 (19.95)

680 (3.02)
3463 (15.40)

592** (2.63)
2736 (12.17)

523** (2.32)
2216** (9.86)

= radius of gyration. r

nd standard finish specifications.

 .
5
)

B32 Channel & Combinations

1
B32 5

• Thickness: 12 Gauge (2.6 mm) / 9

• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m) 8 /

• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized, Hot- ” 3
( 2
Dipped Galvanized, Stainless Steel Type 304 4 ”
• Weight: 1.70 Lbs./Ft. (2.53 kg/m) 1
13/8” .
(34.9) 3
3
/ 8” )
(9.5) 7
X /
8
”
(
( 7
2 .
2 1
. )
2 X
)
Y

13
/16” Y
.
(20.6) 6
SECTION PROPERTIES X - X Axis Y0
5
- Y Axis
2
Areas of Moment of Section Radius of Moment of Section
(
Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus
1 (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 5 cm3
lbs./ft. kg/m
.
4
B32 1.733 (2.58) .510 (3.29) .1252 (5.21) .1626 (2.67) .496 (1.26) .2098 (8.73) .2582 (4.23)
)
B32A 3.467 (5.16) 1.020 (6.58) .6238 (25.96) .4537 (7.43) .782 (1.99) .4195 (17.46 .5163 (8.46)
)
Channel & Combinations

15 /8
Y ”
(41.3
)
Calculations of section properties are based on metal thicknesses as determined Y Design Manual.
by the AISI Cold-Formed Steel
13/8”
X
(34.9)
31 /4 X
X Y
2”3/4”
X(82.5
)
Y .687 Y
(17.
4)
 Y .687 Y
X Y (69.8)
.605 (17.
13
/16” (20.6) 15/8” (15. 4)
B32A (41.3) 4) 13 /8 13 /8
” ”

B32B (34.9) B32C

Wt. 3.40 Lbs./Ft. (5.06 kg/m) Wt. 3.40 Lbs./Ft. (5.06 kg/m) Wt. 3.40 Lbs./Ft.
Reference page 14 for general fitting and standard finish specifications.
28
 Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
in.3 cm3 in. cm

(4.23) .642 (1.63)

(8.46) .642 (1.63)

15 /8
”
(41.3
Y )Design Manual.
ld-Formed Steel
X
31 /4
”
(82.5
)
Y
Y

13 /8
”

B32C (34.9)
Wt. 3.40 Lbs./Ft. (5.06 kg/m)

Strut Systems
 B32 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B32 B32A 2210 (9.83) .016 (.40) 2210 (9.83) 2210
2210* (9.83) .003 (.07) 2210* (9.83) 2210*
24 (609) B32 B32A 1299 (5.78) .065 (1.65) 1299 (5.78) 1299
2210* (9.83) .022 (.56) 2210* (9.83) 2210*
36 (914) B32 B32A 866 (3.85) .147 (3.73) 866 (3.85) 587
2210* (9.83) .076 (1.93) 2210* (9.83) 2210*
48 (1219) B32 B32A 649 (2.89) .262 (6.65) 495 (2.20) 330
1817 (8.08) .148 (3.76) 1817 (8.08) 1638
60 (1524) B32 B32A 520 (2.31) .410 (10.41) 317 (1.41) 211
1454 (6.47) .231 (5.87) 1454 (6.47) 1048
72 (1829) B32 B32A 433 (1.92) .590 (14.98) 220 (0.98) 147
1211 (5.39) .333 (8.46) 1092 (4.86) 728
84 (2133) B32 B32A 371 (1.65) .803 (20.39) 162 (0.72) 108
1038 (4.62) .453 (11.50) 802 (3.57) 535
96 (2438) B32 B32A 325 (1.44) 1.049 (26.64) 124 (0.55) 83
909 (4.04) .591 (15.01) 614 (2.73) 410
108 (2743) B32 289 (1.28) 1.327 (33.70) 98 (0.43) 65
B32A 808 (3.59) .749 (19.02) 485 (2.16) 324
120 (3048) B32 B32A 260 (1.15) 1.639 (41.63) 79 (0.35) 53
727 (3.23) .924 (23.47) 393 (1.75) 262
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING

Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B32 B32A 10278 (4.572) 4036 (17.95) 10432 (46.40) 10035 (44.64)
21320 (94.83) 6557 (29.17) 21378 (95.09) 21224 (94.41)

24 (609) B32 B32A 9104 (40.49) 3732 (16.60) 9600 (42.70) 8387 (37.31)
20806 (92.55) 6431 (28.60) 21039 (93.58) 20421 (90.84)

36 (914) B32 B32A 7640 (33.98) 3323 (14.78) 8479 (37.71) 6520 (29.00)
19950 (88.74) 6228 (27.70) 20474 (91.07) 19083 (84.88)

48 (1219) B32 B32A 6151 (27.36) 2877 (12.80) 7265 (32.31) 4778 (21.25)
18751 (83.41) 5954 (26.48) 19682 (87.55) 17210 (76.55)
60 (1524) B32 B32A 4778 (21.25) 2435 (10.83) 6060 (26.95) 3693 (16.43)
17210 (76.55) 4692 (20.87) 18665 (83.02) 14801 (65.84)

72 (1829) B32 B32A 3870 (17.21) 2089 (9.29) 4923 (21.90) 2994 (13.32)
15326 (68.17) 3448 (15.34) 17421 (77.49) 11858 (52.75)

84 (2133) B32 B32A 3243 (14.42) 1817 (8.08) 4114 (18.30) 2489 (11.07)
13100 (58.27) 2609 (11.60) 15951 (70.95) 8798 (39.13)

96 (2438) B32 B32A 2774 (12.34) 1594 (7.09) 3531 (15.70) 1993 (8.86)
10525 (46.82) 2014 (8.96) 14256 (63.41) 6736 (29.96)

108 (2743) B32 B32A 2403 (10.69) 1407 (6.26) 3083 (13.71) 1574** (7.00)
8316 (36.99) 1592 (7.08) 12334 (54.86) 5322 (23.67)

120 (3048) B32 B32A 1993 (8.86) 1221 (5.43) 2723 (12.11) 1275** (5.67)
6736 (29.96) 1289 (5.73) 10203 (45.38) 4311 (19.17)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 29
Loading Data
d @ Deflection = 1/240 Span
1/360 Span
kN Lbs. kN

2210 (9.83)
2210* (9.83)

1299 (5.78)
2210* (9.83)

587 (2.61)
2210* (9.83)

330 (1.47)
1638 (7.28)

211 (0.94)
1048 (4.66)

147 (0.65)
728 (3.24)

108 (0.48)
535 (2.38)

83 (0.37)
410 (1.82)

65 (0.29)
324 (1.44)

53 (0.23)
262 (1.16)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

9753 (43.38)
21106 (93.88)

7640 (33.98)
19950 (88.74)

5425 (24.13)
18023 (80.17)

3870 (17.21)
15326 (68.17)
 2994 (13.32)
11858 (52.75)

2403 (10.68)
8316 (36.99)

1807** (8.04)
6110 (27.18)

1384** (6.15)
4678 (20.81)

1093** (4.86)
3696** (16.44)

886** (3.94)
2994** (13.32)

= radius of gyration. r

and standard finish specifications.

 B42 Channel & Combinations
B42
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304
• Weight: 1.44 Lbs./Ft. (2.14 kg/m)
Note: Also available in 14 gauge (1.9mm) material as B44

15/8”
(41.3)
3
/ 8”
1” (9.5) 7
/ 8”
(22.
X 2)
(25.4)

X
.4226
(10.7)
13
/16” Y

(20.6)
SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B42 1.468 (2.18) .432 (2.79) .0554 (2.31) .0968 (1.59) .358 (.91) .1645 (6.85) .2025
B42A 2.936 (4.37) .864 (5.57) .2689 (11.19) .2689 (4.41) .558 (1.42) .3292 (13.70 .4052
)
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
Y
1” 2”
(25.4)(50.8)
X
X X
 13
/16” (20.6) Y 15/8”
15/8” (41.3)
(41.3) Y
.428 1”
(10.9)

B42A B42B (25.4)

Wt. 2.88 Lbs./Ft. (4.28 kg/m) Wt. 2.88 Lbs./Ft. (4.28 kg/m)
Reference page 14 for general fitting and standard finish specifications.
30
 3
/ 8”
(9.5)

(10.7)

Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
in.3 cm3 in. cm

(3.32) .617 (1.57)

(6.64) .617 (1.57)

Cold-Formed Steel Design Manual.

X
31/4”
(82.5)
 15/8”
(41.3)
Y
1”

(25.4)

t. 2.88 Lbs./Ft. (4.28 kg/m)

s.
Strut Systems
 B42 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B42 B42A 1538 (6.84) .022 (.56) 1538 (6.84) 1538
1590* (7.07) .005 (.13) 1590* (7.07) 1590*
24 (609) B42 B42A 769 (3.42) .088 (2.23) 769 (3.42) 582
1590* (7.07) .038 (.96) 1590* (7.07) 1590*
36 (914) B42 B42A 513 (2.28) .198 (5.03) 388 (1.72) 259
1428 (6.35) .114 (2.89) 1428 (6.35) 1248
48 (1219) B42 B42A 384 (1.71) .352 (8.94) 218 (0.97) 145
1071 (4.76) .203 (5.15) 1053 (4.68) 702
60 (1524) B42 B42A 308 (1.37) .550 (13.97) 140 (0.62) 93
857 (3.81) .318 (8.08) 674 (3.00) 449
72 (1829) B42 B42A 256 (1.14) .792 (20.11) 97 (0.43) 65
714 (3.17) .457 (11.61) 468 (2.08) 312
84 (2133) B42 B42A 220 (0.98) 1.079 (27.40) 71 (0.31) 48
612 (2.72) .623 (15.82) 344 (1.53) 229
96 (2438) B42 B42A 192 (0.85) 1.409 (35.79) 55 (0.24) 36
535 (2.38) .813 (20.65) 263 (1.17) 176
108 (2743) B42 B42A 171 (0.76) 1.783 (45.29) 43 (0.19) 29
476 (2.12) 1.029 (26.13) 208 (0.92) 139
120 (3048) B42 B42A 154 (0.68) 2.202 (55.93) 35 (0.15) 23
428 (1.90) 1.271 (32.28) 168 (0.75) 112
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B42 B42A 9138 (40.65) 3493 (15.54) 9283 (41.23) 8916 (39.66)
21094 (93.83) 5834 (25.95) 21304 (94.76) 20793 (92.49)

24 (609) B42 B42A 8137 (36.19) 3145 (13.99) 8540 (37.99) 7589 (33.76)
19757 (87.88) 5585 (24.84) 20299 (90.29) 18964 (84.35)

36 (914) B42 B42A 7050 (31.36) 2722 (12.11) 7657 (34.06) 5925 (26.35)
18094 (80.48) 5237 (23.29) 19067 (84.81) 16654 (74.08)

48 (1219) B42 B42A 5405 (24.04) 2227 (9.90) 6786 (30.18) 3512 (15.62)
16139 (71.79) 4818 (21.43) 17632 (78.43) 13906 (61.86)
60 (1524) B42 B42A 3512 (15.62) 1718 (7.64) 5272 (23.45) 2247 (9.99)
13906 (61.86) 4352 (19.36) 16008 (71.21) 10710 (47.64)

72 (1829) B42 B42A 2439 (10.85) 1351 (6.01) 3694 (16.43) 1561** (6.94)
11387 (50.65) 3856 (17.15) 14200 (64.16) 7531 (33.50)

84 (2133) B42 B42A 1792 (7.97) 1087 (4.83) 2714 (12.07) 1147** (5.10)
8645 (38.45) 3332 (14.82) 12206 (54.29) 5533 (24.61)

96 (2438) B42 B42A 1372** (6.10) 891 (3.96) 2078 (9.24) 878** (3.90)
6619 (29.44) 2873 (12.78) 10012 (44.53) 4236 (18.84)

108 (2743) B42 B42A 1084** (4.82) 743 (3.30) 1642 (7.30) – 3347 –
5230 (23.26) 2495 (11.10) 7922 (35.24) (14.89)

120 (3048) B42 B42A 878** (3.90) 628 (2.79) 1330** (5.91) – –
4236 (18.84) 2182 (9.70) 6417 (28.54) 2711** (12.06)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 31
Loading Data
d @ Deflection = 1/240 Span
1/360 Span
kN Lbs. kN

1538 (6.84)
1590* (7.07)

582 (2.59)
1590* (7.07)

259 (1.15)
1248 (5.55)

145 (0.64)
702 (3.12)

93 (0.41)
449 (2.00)

65 (0.29)
312 (1.39)

48 (0.21)
229 (1.02)

36 (0.16)
176 (0.78)

29 (0.13)
139 (0.62)

23 (0.10)
112 (0.50)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

8670 (38.56)
20469 (91.05)

7050 (31.36)
18094 (80.48)

4335 (19.28)
15057 (66.98)

2439 (10.85)
11387 (50.65)
 1561** (6.94)
7531 (33.50)

1084** (4.82)
5230 (23.26)

796** (3.54)
3842 (17.09)

– – (13.08)
2942**
– – (10.34)
2324**
– –
1883** (8.37)

= radius of gyration. r

and standard finish specifications.

 B52 Channel & Combinations
B52
• Thickness: 12 Gauge (2.6 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized,
Stainless Steel Type 304 or 316, Hot-Dipped Galvanized
• Weight: 1.27 Lbs./Ft. (1.89 kg/m)

15/8”
3
/ 8” (41.3) 3
/ 8”
(9.5) 7
/8 (9
13
/16” .5
” )
(22
.2)
(20.6) X X
Y .
13
/16”3
3
(20.6)
6
6
SECTION PROPERTIES X - X Axis Y - (Y Axis
8
.
Areas of Moment of Section Radius of Moment of Section
5
Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B52 1.313 (1.95) .386 (2.49) .0320 (1.33) .0673 (1.10) .288 (.73) .1404 (5.84) .1728 (2.83
B52A 2.627 (3.91) .773 (4.99) .1517 (6.31) .1868 (3.06) .443 (1.13) .2809 (11.69 .3457 )
) (5.67
)
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
1.241
(31.5) Y
13
/16” Y
27/16”

(20.6) X (41.3) 31/4”

X X (82.5)
X
 X Y X 15/8” Y
13
/16” (20.6) Y (41.3) 15/8”
B52A 15/8” (41.3)
(41.3)
13
/16” (20.6) 13
/16” (20.6)
B52B3 B52B4

Wt. 2.54 Lbs./Ft. (3.78 kg/m) Wt. 3.81 Lbs./Ft. (5.67 kg/m) Wt. 5.08 Lbs./Ft.
Reference page 14 for general fitting and standard finish specifications.
32
 3
/ 8”
/32”
9
(7.1)

Y - Y Axis

ction Radius of
odulus (S) Gyration (r)
cm3 in. cm

(2.83 .603 (1.53)

) .603 (1.53)
(5.67
)

med Steel Design Manual.

31/4”
X (82.5)
X
 15/8”
(41.3)

13
/16” (20.6) Y
15/8”
B52B4 (41.3)

Wt. 5.08 Lbs./Ft. (7.56 kg/m)

Strut Systems
 B52 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B52 B52A 1079 (4.80) .026 (.66) 1079 (4.80) 1079
1270* (5.65) .006 (.15) 1270* (5.65) 1270*
24 (609) B52 B52A 539 (2.40) .106 (2.69) 506 (2.25) 337
1270* (5.65) .052 (1.32) 1270* (5.65) 1270*
36 (914) B52 B52A 360 (1.60) .240 (6.09) 225 (1.00) 150
1013 (4.50) .141 (3.58) 1013 (4.50) 719
48 (1219) B52 B52A 270 (1.20) .427 (10.84) 126 (0.56) 84
759 (3.37) .250 (6.35) 607 (2.70) 404
60 (1524) B52 B52A 216 (0.96) .667 (16.94) 81 (0.36) 54
608 (2.70) .391 (9.93) 388 (1.72) 259
72 (1829) B52 B52A 180 (0.80) .960 (24.38) 56 (0.25) 37
506 (.225) .563 (14.30) 270 (1.20) 180
84 (2133) B52 B52A 154 (0.68) 1.307 (33.20) 41 (0.18) 28
434 (1.93) .766 (19.45) 198 (0.88) 132
96 (2438) B52 B52A 135 (0.60) 1.707 (43.36) 32 (0.14) 21
380 (1.69) 1.001 (25.42) 152 (0.67) 101
108 (2743) B52 120 (0.53) 2.160 (54.86) 25 (0.11) 17
B52A 338 (1.50) 1.267 (32.18) 120 (0.53) 80
120 (3048) B52 B52A 108 (0.48) 2.667 (67.74) 20 (0.89) 13
304 (.135) 1.564 (39.72) 97 (0.43) 65
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING

Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B52 B52A 8407 (37.36) 3162 (14.06) 8543 (38.00) 8205 (36.50)
19160 (85.23) 5290 (23.53) 19425 (86.41) 18777 (83.52)

24 (609) B52 B52A 7519 (33.44) 2755 (12.25) 7879 (35.05) 6521 (29.01)
17444 (77.59) 4955 (22.04) 18144 (80.71) 16412 (73.00)

36 (914) B52 B52A 5397 (24.01) 2152 (9.57) 6653 (29.59) 3616 (16.08)
15275 (67.94) 4496 (20.00) 16547 (73.60) 13376 (59.50)

48 (1219) B52 B52A 3178 (14.13) 1560 (6.94) 4785 (21.28) 2034 (9.05)
12692 (56.46) 3963 (17.63) 14667 (65.24) 9683 (43.07)
60 (1524) B52 B52A 2034 (9.05) 1159 (5.15) 3081 (13.70) 1302** (5.79)
9683 (43.07) 3383 (15.05) 12516 (55.67) 6248 (27.79)

72 (1829) B52 B52A 1412** (6.28) 891 (3.96) 2139 (9.51) 904** (4.02)
6780 (30.16) 2799 (12.45) 10084 (44.85) 4339 (19.30)

84 (2133) B52 B52A 1038** (4.62) 704 (3.13) 1572 (6.99) 664** (2.95)
4981 (22.15) 2337 (10.39) 7545 (33.56) 3188 (14.18)

96 (2438) B52 B52A 794** (3.53) 570 (2.53) 1203** (5.35) – –

3814 (16.96) 1973 (8.77) 5777 (25.70) 2441** (10.86)

108 (2743) B52 B52A -3013 (13.40) 470 (2.09) 951** (4.23) – – (8.57)
1684 (7.49) 4564 (20.30) 1928**
120 (3048) B52 B52A - - 394 (1.75) 770** (3.42) – –
2441** (10.86) 1452 (6.46) 3697 (16.44) 1562** (6.95)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 33
Loading Data
ad @ Deflection = 1/240 Span
Span
kN Lbs. kN

1079 (4.80)
1270* (5.65)

337 (1.50)
1270* (5.65)

150 (0.67)
719 (3.20)

84 (0.37)
404 (1.80)

54 (0.24)
259 (1.15)

37 (0.16)
180 (0.80)

28 (0.12)
132 (0.59)

21 (0.93)
101 (0.45)

17 (0.75)
80 (0.35)

13 (0.58)
65 (0.29)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

7989 (35.54)
18363 (81.68)

5397 (24.01)
15275 (67.94)

2511 (11.17)
11243 (50.01)

1412** (6.28)
6780 (30.16)
 904** (4.02)
4339 (19.30)

– 3013 –
(13.42)

– – (9.85)
2214**
– – (7.54)
1695**
– – (5.95)
1339**
– –
– –

= radius of gyration. r

and standard finish specifications.

 B54 Channel & Combinations
B54
• Thickness: 14 Gauge (1.9 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized,
Hot-Dipped Galvanized, Stainless Steel Type 304 or 316, Aluminum
• Weight: .97 Lbs./Ft. (1.44 kg/m)

/8” (9.5)
3
15/8” 3
/ 8”
/16”
13 (41.3) (9.5)
(20.6) X
7
/8” (22.2)
X
Y .3422
(8.7)
13
/16”
(20.6)

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B54 1.016 (1.51) .299 (1.93) .0263 (1.09) .0560 (.92) .297 (.75) .1106 (4.60) .1361 (2.23)
B54A 2.032 (3.02) .598 (3.86) .1226 (5.10) .1510 (2.47) .453 (1.15) .2212 (9.12) .2722 (4.46)
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
1.241
(31.5)
Y Y
27/16Y”

15/8” X (41.3)
X (41.3) X

X X

13
/16” (20.6) Y 13
/16” (20.6) Y Y
15/8” 13
/16” 13
/16”
(20.6)
 (41.3) 15/8” (20.6)
(41.3) B54B4
B54A B54B3

Wt. 1.94 Lbs./Ft. (2.89 kg/m) Wt. 2.91 Lbs./Ft. (4.33 kg/m) Wt. 3.88 Lbs./Ft. (
Reference page 14 for general fitting and standard finish specifications.
34
 3
/ 8”
(9.5)

X
.3422
(8.7) /32”
9
(7.1)

Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
n.3 cm3 in. cm

(2.23) .608 (1.55)

(4.46) .608 (1.55)

ormed Steel Design Manual.

31/4”
(82.5)
X
X

15/8”
(41.3)
(20.6) 15/8”
B54B4 (41.3)

Wt. 3.88 Lbs./Ft. (5.77 kg/m)

Strut Systems
 B54 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B54 B54A 870 (3.87) .027 (.68) 870 (3.87) 870
870* (3.87) .005 (.13) 870* (3.87) 870*
24 (609) B54 B54A 465 (2.07) .108 (2.74) 430 (1.91) 287
870* (3.87) .043 (1.09) 870* (3.87) 870*
36 (914) B54 B54A 310 (1.38) .243 (6.17) 191 (0.85) 127
832 (3.70) .141 (3.58) 832 (3.70) 591
48 (1219) B54 B54A 233 (1.03) .432 (10.97) 108 (0.48) 72
624 (2.77) .250 (6.35) 499 (2.22) 332
60 (1524) B54 B54A 186 (0.83) .676 (17.17) 69 (0.31) 46
499 (2.22) .391 (9.93) 319 (1.42) 213
72 (1829) B54 B54A 155 (0.69) .973 (24.71) 48 (0.21) 32
416 (1.85) .563 (14.30) 222 (0.99) 148
84 (2133) B54 B54A 133 (0.59) 1.324 (33.63) 35 (0.15) 23
357 (1.59) .766 (19.45) 163 (0.72) 109
96 (2438) B54 B54A 116 (0.51) 1.730 (43.94) 27 (0.12) 18
312 (1.39) 1.001 (25.42) 125 (0.55) 83
108 (2743) B54 103 (0.46) 2.189 (55.60) 21 (0.93) 14
B54A 277 (1.23) 1.267 (32.18) 98 (0.43) 66
120 (3048) B54 B54A 93 (0.41) 2.703 (68.65) 17 (0.75) 11
250 (1.11) 1.564 (39.72) 80 (0.35) 53
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. N Lbs. N Lbs. N
Lbs. N Lbs. N

12 (305) B54 B54A 6186 (27.51) 2586 (11.50) 6284 (27.95) 6032 (26.83)
12763 (56.77) 4060 (18.06) 12835 (57.09) 12645 (56.25)

24 (609) B54 B54A 5464 (24.30) 2254 (10.02) 5763 (25.63) 4968 (22.10)
12135 (53.98) 3857 (17.16) 12420 (55.25) 11663 (51.88)

36 (914) B54 B54A 4300 (19.13) 1816 (8.08) 5043 (22.43) 3076 (13.68)
11087 (49.32) 3549 (15.79) 11728 (52.17) 10026 (44.60)

48 (1219) B54 B54A 2703 (12.02) 1341 (5.96) 3920 (17.44) 1730 (7.69)
9620 (42.79) 3169 (14.09) 10759 (47.86) 7734 (34.40)
60 (1524) B54 B54A 1730 (7.69) 995 (4.42) 2621 (11.66) 1107** (4.92)
7734 (34.40) 2745 (12.21) 9514 (42.32) 5134 (22.84)

72 (1829) B54 B54A 1201 (5.34) 763 (3.39) 1820 (8.09) 769** (3.42)
5571 (24.78) 2291 (10.19) 7992 (35.50) 3566 (15.86)

84 (2133) B54 B54A 883** (3.93) 603 (2.68) 1337 (5.95) 565** (2.51)
4093 (18.20) 1913 (8.51) 6200 (27.58) 2620 (11.65)

96 (2438) B54 B54A 676** (3.01) 487 (2.16) 1024** (4.55) – – (8.92)
3134 (13.94) 1616 (7.19) 4747 (21.11) 2006**
108 (2743) B54 B54A 534** (2..37) 401 (1.78) 809** (3.60) – – (7.05)
2476 (11.01) 1380 (6.14) 3751 (16.68) 1585**
120 (3048) B54 B54A – – (8.92) 336 (1.49) 655** (2.91) – – (5.71)
2006** 1190 (5.29) 3038 (13.51) 1284**
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 35
Loading Data
d @ Deflection = 1/240 Span
1/360 Span
kN Lbs. kN

870 (3.87)
870* (3.87)

287 (1.27)
870* (3.87)

127 (0.56)
591 (2.63)

72 (0.32)
332 (1.48)

46 (0.20)
213 (0.95)

32 (0.14)
148 (0.66)

23 (0.10)
109 (0.48)

18 (0.80)
83 (0.37)

14 (0.62)
66 (0.29)

11 (0.49)
53 (0.23)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
N Lbs. N

5857 (26.05)
12501 (55.61)

4300 (19.13)
11087 (49.32)

2136 (9.50)
8729 (38.83)

1201 (5.34)
5571 (24.78)
 769** (3.42)
3566 (15.86)

534** (2.37)
2476 (11.01)

– – (8.09)
1819**
– – (6.19)
1393**
– – (4.89)
1100**
– –
– –

= radius of gyration. r

and standard finish specifications.

 B56 Channel & Combinations
B56
• Thickness: 16 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m) & 20’ (6.09 m)
• Standard finishes: Plain, DURA-GREEN™, Pre-Galvanized, Hot-Dipped Galvanized
• Weight: .85 Lbs./Ft. (1.26 kg/m)

3
/ 8” (9.5) 15/8” 3

(41.3) /
13
/16” 7
/ 8” 8
(20.6) (22.2) ”

(
9
.
Y

X
Y
27
/64” 13
/16”
(10.7)

(20.6)
SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section

Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S)
Channel sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3
lbs./ft. kg/m

B56 .894 (1.33) .263 (1.70) .0241 (1.00) .0546 (.89) .303 (.77) .0966 (4.02) .1189
B56A 1.789 (2.66) .526 (3.39) .1205 (5.02) .1484 (2.43) .479 (1.22) .1931 (8.04) .2377
Channel & Combinations

Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel Design Manual.
Y
Y
27/16” 31/4”
Y
15/8” X (82.5
X (61.9)
X (41.3) X X
X
1.20
Y 7
13/16 (30.7
13
/16” (20.6) Y 13
/16” (20.6)
” )
B56A 15/8” (20.6) 15 /8
(41.3) ” 13
/16” (20.6)
B56B4

B56B3 (41.3)
Wt. 1.70 Lbs./Ft. (2.53 kg/m) Wt. 2.55 Lbs./Ft. (3.79 kg/m) Wt. 3.40 Lbs./Ft. (
Reference page 14 for general fitting and standard finish specifications.
36
anized

(9.4)

Y - Y Axis

Section Radius of
Modulus (S) Gyration (r)
in.3 cm3 in. cm

(1.95) .606 (1.54)

(3.89) .606 (1.54)

Cold-Formed Steel Design Manual.

Y
31/4”
X (82.5)
X

Y 15/8”
1 / 8”
5 (41.3)
(41.3)
13
/16” (20.6)
B56B4

Wt. 3.40 Lbs./Ft. (5.06 kg/m)

s.
Strut Systems
 B56 Beam & Column Loading Data
BEAM LOADING
Uniform Load @ Deflection = 1/240 Span
Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B56 B56A 610 (2.73) .027 (.68) 610 (2.71) 610
610* (2.71) .004 (.10) 610* (2.71) 610*
24 (609) B56 B56A 405 (1.80) .109 (2.77) 372 (1.65) 248
610* (2.71) .035 (.89) 610* (2.71) 610*
36 (914) B56 B56A 270 (1.20) .245 (6.22) 165 (0.73) 110
610* (2.71) .121 (3.07) 610* (2.71) 502
48 (1219) B56 B56A 202 (0.90) .435 (11.05) 93 (0.41) 62
530 (2.36) .250 (6.35) 423 (1.88) 282
60 (1524) B56 B56A 162 (0.72) .680 (17.27) 59 (0.26) 40
424 (1.88) .391 (9.93) 271 (1.20) 181
72 (1829) B56 B56A 135 (0.60) .980 (24.89) 41 (0.18) 28
353 (1.57) .563 (14.30) 188 (0.83) 125
84 (2133) B56 B56A 116 (0.51) 1.334 (33.88) 30 (0.13) 20
303 (1.35) .766 (19.45) 138 (0.61) 92
96 (2438) B56 B56A 101 (0.45) 1.742 (44.24) 23 (0.10) 15
265 (1.18) 1.001 (25.42) 106 (0.47) 71
108 (2743) B56 90 (0.40) 2.205 (56.01) 18 (0.80) 12
B56A 236 (1.05) 1.267 (32.18) 84 (0.37) 56
120 (3048) B56 B56A 81 (0.36) 2.722 (69.14) 15 (0.67) 10
212 (0.94) 1.564 (39.72) 68 (0.30) 45
Channel & Combinations

Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B56 B56A 4968 (22.10) 2182 (9.70) 5044 (22.44) 4845 (21.55)
10237 (45.53) 3365 (14.97) 10291 (45.77) 10148 (45.14)

24 (609) B56 B56A 4367 (19.42) 1903 (8.46) 4624 (20.57) 3985 (17.72)
9762 (43.42) 3202 (14.24) 9977 (44.38) 9405 (41.83)

36 (914) B56 B56A 3572 (15.89) 1557 (6.92) 4034 (17.94) 2658 (11.82)
8969 (39.89) 2955 (13.14) 9454 (42.05) 8167 (36.33)

48 (1219) B56 B56A 2335 (10.38) 1164 (5.18) 3290 (14.63) 1495 (6.65)
7860 (34.96) 2649 (11.78) 8722 (38.80) 6434 (28.62)
60 (1524) B56 B56A 1495 (6.65) 862 (3.83) 2264 (10.07) 957 (4.26)
6434 (28.62) 2307 (10.26) 7780 (34.61) 4360 (19.39)

72 (1829) B56 B56A 1038 (4.62) 661 (2.94) 1572 (6.99) 664** (2.95)
4731 (21.04) 1937 (8.61) 6629 (29.49) 3028 (13.47)

84 (2133) B56 B56A 763** (3.39) 522 (2.32) 1155 (5.14) 488** (2.17)
3476 (15.46) 1619 (7.20) 5269 (23.44) 2224 (9.89)

96 (2438) B56 B56A 584** (2.60) 422 (1.88) 884** (3.93) – – (7.57)
2661 (11.84) 1368 (6.08) 4031 (17.93) 1703**
108 (2743) B56 B56A 461** (2.05) 348 (1.55) 699** (3.11) – – (5.99)
2103 (9.35) 1169 (5.20) 3185 (14.17) 1346**
120 (3048) B56 B56A – – 291 (1.29) 566** (2.42) – –
1703** (7.57) 1008 (4.48) 2580 (11.47) 1090** (4.85)

**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 14 for general fitting and standard finish specifica

Strut Systems 37
Loading Data
d @ Deflection = 1/240 Span
1/360 Span
kN Lbs. kN

610 (2.71)
610* (2.71)

248 (1.10)
610* (2.71)

110 (0.49)
502 (2.23)

62 (0.27)
282 (1.70)

40 (0.18)
181 (0.80)

28 (0.12)
125 (0.55)

20 (0.89)
92 (0.41)

15 (0.67)
71 (0.31)

12 (0.53)
56 (0.25)

10 (0.44)
45 (0.20)

rdance with MFMA, with adequate lateral bracing (see page 11

trated load capacity at mid span, multiply uniform load by 0.5

oaded @ C.G.)
K = 1.2
kN Lbs. kN

4702 (20.91)
10039 (44.65)

3572 (15.89)
8969 (39.89)

1845 (8.21)
7186 (31.96)

1038 (4.62)
4731 (21.04)
 664** (2.95)
3028 (13.47)

461** (2.05)
2103 (9.35)

– – (6.87)
1545**
– – (5.26)
1183**
– – (4.15)
934**
– –
– –

= radius of gyration. r

and standard finish specifications.

 Telescoping Channel
BTS22TH
• Can be secured at any point of system
• Order BTS22TH & B22TH separately
• Thickness: 12 Gauge (1.5 mm)
• Standard lengths: 10’ (3.05 m)
• Standard finishes: DURA-GREEN™, Yellow Zinc Dichromate, Hot-Dipped Galvanized

Slip Load Data

Resistance to slip* Resistance to slip* 700 lbs.
3600 lbs.
/4” thick 2-hole
1

/2” bolt
1

fitting with (2)

/2” bolts &
1 & nut

channel nuts. Typical of many standard fittings.

*With a safety factor of 3
Channel & Combinations

BTS22TH
TELESCOPING STRUT
Fits over all 15/8” x 15/8” channels 9/16” holes on 17/8” centers 12 gauge material thickness
Section properties are based on nominal metal thickness, and overall dimensions.

” Y

C
L X

Y 17/8”

Section Properties X-X Axis Y-Y Axis

Channel Weight Area Cx Ix Sx rx Cy Iy Sy ry
lbs./ft. In2 In In4 In3 In In In4 In3 In
BTS22TH 1.934 0.4578 1.0009 0.2525 0.2523 0.7426 0.9375 0.2757 0.2941 0.7761
 B22TH
THREE HOLE STRUT
/16” holes on 17/8” centers 12 gauge material thickness
9

/ 8”
7

C
X CL X

Section Properties X-X Axis Y-Y Axis

Channel Weight Area Cx Ix Sx rx Cy Iy Sy ry
lbs./ft. In2 In In4 In3 In In In4 In3 In
B22TH 1.760 0.3863 0.8245 0.1596 0.1936 0.6400 0.8125 0.1719 0.2116 0.6642
15/8”

Section properties are based on nominal metal thickness, and overall dimensions.
COMBINATION OF BTS22TH & B22TH Cy

/ 8”
7
Y

C
”

X CL X

Section Properties X-X Axis Y-Y Axis

Channel Weight Area Cx Ix Sx rx Cy Iy Sy ry
Combination lbs./ft. In2 In In4 In3 In In In4 In3 In
BTS22TH/B22TH 3.597 0.8474 0.9773 0.4126 0.4222 0.6978 0.9375 0.4476 0.4774 0.7268

Section properties are based on nominal metal thickness, and overall dimensions.
Reference page 14 for general fitting and standard finish specifications.
38
vanized

Cy
7
/8
x
17/8”
kness X
 Y Cy

15/8” x
Y 15/8”

Cy

x
17/8
17/8”

Strut Systems
 Telescoping Channel
BEAM LOADING DATA
B22TH
Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load @
Span Load Deflection Deflection=1/240 Span Lbs.
in lbs* in kN
12 2225 0.015 3225 (14.34)
24 1610 0.061 1610 (7.16)
36 1071 0.136 1071 (4.76)
48 800 0.243 658 (2.92)
60 637 0.379 417 (1.85)
72 528 0.546 286 (1.27)
84 449 0.743 206 (0.91)
96 390 0.970 153 (0.68)
108 344 1.228 116 (0.51)
120 306 1.516 90 (0.40)
Beam
Span
B22TH

BTS22TH
Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load @
Span Load Deflection Deflection=1/240 Span
in lbs* in
Lbs. kN
12 4203 0.012 4203 (18.69)
24 2099 0.050 2099 (9.33)
36 1396 0.112 1396 (6.21)
48 1044 0.200 1044 (4.64)
60 831 0.312 664 (2.95)
72 689 0.450 456 (2.03)
84 587 0.612 330 (1.48)
96 510 0.799 248 (1.10)
108 450 1.012 190 (0.84)
120 401 1.249 149 (0.66)
Channel & Combinations

Beam
Span
BTS22TH
BTS22TH & B22TH
TELESCOPING MEMBERS OF EQUAL LENGTH
 Beam Load Data x-x Axis
Beam Allowable Resulting Allowable Load @
Span Load Deflection Deflection=1/240 Span
in lbs* in
Lbs. kN
12 7033 0.013 7033 (31.28)
24 3511 0.051 3511 (15.62)
36 2335 0.115 2335 (10.38)
48 1745 0.205 1705 (7.58)
60 1389 0.320 1082 (4.81)
72 1151 0.460 742 (3.30)
84 980 0.627 536 (2.38)
96 851 0.819 401 (1.78)
108 749 1.036 307 (1.36)
120 668 1.279 239 (1.06)
Beam
Span
*Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) with adequate lateral bracing (see pa
determine concentrated load capacity at mid span, multiply uniform load by 0.5 and corresponding deflection by 0.8.
Reference page 14 for general fitting and standard finish specific
Strut Systems 39
BTS22TH & B22TH
 Telescoping Channel

LENGTH
lowable design stress of 25,000 psi (172 MPa) with adequate lateral bracing (see page 11 for further explanation). To
span, multiply uniform load by 0.5 and corresponding deflection by 0.8.
Reference page 14 for general fitting and standard finish specifications.
39
 Channel Hole Patterns
B11SH THRU B56SH
SH TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B11SH 12 Ga. (2.6) 31/4” (82.5) 2.97 (4.42)

B12SH 12 Ga. (2.6) 27/16” (61.9) 2.39 (3.55)

B22SH 12 Ga. (2.6) 15/8” (41.3) 1.82 (2.71)

B24SH 14 Ga. (1.9) 15/8” (41.3) 1.34 (1.99)

B26SH 16 Ga. (1.5) 15/8” (41.3) 1.07 (1.59)

B32SH 12 Ga. (2.6) 13/8” (34.9) 1.62 (2.41)

B42SH 12 Ga. (2.6) 1” (25.4) 1.36 (2.02)

B52SH 12 Ga. (2.6) /16”
13 (20.6) 1.19 (1.77)

B54SH 14 Ga. (1.9) /16”

13 (20.6) .91 (1.35)
B56SH 16 Ga. (1.5) /16”
13 (20.6) .80 (1.19)

B11S THRU B56S

S TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Channel & Combinations

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B11S 12 Ga. (2.6) 31/4” (82.5) 2.94 (4.37)

B12S 12 Ga. (2.6) 27/16” (61.9) 2.36 (3.51)

B22S 12 Ga. (2.6) 15/8” (41.3) 1.79 (2.66)

B24S 14 Ga. (1.9) 15/8” (41.3) 1.32 (1.96)

B26S 16 Ga. (1.5) 15/8” (41.3) 1.06 (1.58)

B32S 12 Ga. (2.6) 13/8” (34.9) 1.59 (2.36)

B42S 12 Ga. (2.6) 1” (25.4) 1.33 (1.98)

B52S 12 Ga. (2.6) /16”
13 (20.6) 1.16 (1.72)

B54S 14 Ga. (1.9) /16”

13 (20.6) .89 (1.32)
B56S 16 Ga. (1.5) /16”
13 (20.6) .79 (1.17)

B11H17/8 THRU B56H17/8

H17/8 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B11H17/8 12 Ga. (2.6) 31/4” (82.5) 3.00 (4.46)

B12H17/8 12 Ga. (2.6) 27/16” (61.9) 2.42 (3.60)

B22H17/8 12 Ga. (2.6) 15/8” (41.3) 1.85 (2.75)

B24H17/8 14 Ga. (1.9) 15/8” (41.3) 1.36 (2.02)
B26H17/8 16 Ga. (1.5) 15/8” (41.3) 1.09 (1.62)
B32H17/8 12 Ga. (2.6) 13/8” (34.9) 1.65 (2.45)

B42H17/8 12 Ga. (2.6) 1” (25.4) 1.39 (2.07)

B52H17/8 12 Ga. (2.6) /16”
13 (20.6) 1.22 (1.81)

B54H17/8 14 Ga. (1.9) /16”

13 (20.6) .93 (1.38)
B56H17/8 16 Ga. (1.5) /16”
13 (20.6) .82 (1.22)

Reference page 14 for general fitting and standard finish specifications.

40
s

Loading Chart

Loading Chart

4”
(101.6)
Typ. 13/32” x 3”
Slots (10.3)
(76.2)

Loading Chart

17/8”
(47.6)
Typ.
 17/8”
(47.6)
Typ. ” Dia.
9/16
Holes (14.3)
H

neral fitting and standard finish specifications.

40 Strut Systems

2”
(50.8) / ” x 11/8”
9 16
Typ.
Slots (14.3)
(28.6)
H
 Channel Hole Patterns
B22TH
(TH TYPE CHANNEL)
• For beam loads use 90% of Channel Loading Chart
15 (

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B22TH 12 Ga. (2.6) 15/8” (41.3) 1.76 (2.62)

B11KO6 THRU B56KO6

(KO6 TYPE KNOCKOUT CHANNEL)
• For beam loads use 90% of Channel Loading Chart
Channel & Combinations

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B11KO6 12 Ga. (2.6) 31/4” (82.5) 3.05 (4.54)

B12KO6 12 Ga. (2.6) 27/16” (61.9) 2.47 (3.67)

B22KO6 12 Ga. (2.6) 15/8” (41.3) 1.90 (2.83)

B24KO6 14 Ga. (1.9) 15/8” (41.3) 1.40 (2.08)

B26KO6 16 Ga. (1.5) 15/8” (41.3) 1.12 (1.66)

B32KO6 12 Ga. (2.6) 13/8” (34.9) 1.70 (2.53)

B42KO6 12 Ga. (2.6) 1” (25.4) 1.44 (2.14)

B52KO6 12 Ga. (2.6) /16”
13 (20.6) 1.27 (1.89)

B54KO6 14 Ga. (1.9) /16”

13 (20.6) .97 (1.44)
B56KO6 16 Ga. (1.5) /16”
13 (20.6) .85 (1.26)

6” Typ.
(152.4)
B22SHA
(BACK TO BACK SH TYPE CHANNEL)
• For beam loads use 90% of Channel Loading Chart

9
/16” x 11/8” Slots
(14.3) (28.6)
 Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B22SHA 12 Ga. (2.6) 31/4” (82.5) 3.64 (5.42)

B52SHA 12 Ga. (2.6) 15/8” (41.3) 2.38 (1.77)
B54SHA 14 Ga. (1.9) 15/8” (41.3) 1.82 (1.35)
Reference page 14 for general fitting and standard finish specifica
Strut Systems 41
 Channel Hole Patterns
B22TH
(TH TYPE CHANNEL)
9 /16”Loading
• For beam loads use 90% of Channel Dia. Chart
15 ( Holes (14.3)

17/8”
Typ.
(47.6)

/16” H
23.8)

13/16

”
(20.6)

Loading Chart

3”
Typ.
(76.2)
7/8” Dia.
K.O.
H (22.2)

L)
Loading Chart
 2”
Typ.
(50.8)

Reference page 14 for general fitting and standard finish specifications.

41
H
 Channel Hole Patterns
B11S58 THRU B56S58
S58 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart

Height H In. Weight Lbs./Ft.

Part No. Thickness mm kg/m

B11S58 12 Ga. (2.6) 31/4” (82.5) 2.94 (4.37)

B12S58 12 Ga. (2.6) 27/16” (61.9) 2.36 (3.51)

B22S58 12 Ga. (2.6) 15/8” (41.3) 1.79 (2.66)

B24S58 14 Ga. (1.9) 15/8” (41.3) 1.32 (1.96)

B26S58 16 Ga. (1.5) 15/8” (41.3) 1.06 (1.58)

B32S58 12 Ga. (2.6) 13/8” (34.9) 1.59 (2.36)

B42S58 12 Ga. (2.6) 1” (25.4) 1.33 (1.98)

B52S58 12 Ga. (2.6) /16”
13 (20.6) 1.16 (1.72)

B54S58 14 Ga. (1.9) /16”

13 (20.6) .89 (1.32)
B56S58 16 Ga. (1.5) /16”
13 (20.6) .79 (1.17)

B22M THRU B54M

M (MARINE RUNG) TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart
Channel & Combinations

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B22M 12 Ga. (2.6) 15/8” (41.3) 1.79 (2.66)

B24M 14 Ga. (1.9) 15/8” (41.3) 1.32 (1.96)

B32M 12 Ga. (2.6) 13/8” (34.9) 1.59 (2.36)

B42M 12 Ga. (2.6) 1” (25.4) 1.33 (1.98)

B44M 14 Ga. (1.9) 1” (25.4) 0.98 (1.46)

B52M 12 Ga. (2.6) /16”
13 (20.6) 1.16 (1.72)

B54M 14 Ga. (1.9) /16”

13 (20.6) 0.89 (1.32)
6” (152.4)
B22H25 THRU B56H25
H25 TYPE CHANNEL
• For beam loads use 90% of Channel Loading Chart

Height H Weight
Part No. Thickness In. mm Lbs./Ft. kg/m

B22H25 12 Ga. (2.6) 15/8” (41.3) 1.85 (2.75)

B24H25 14 Ga. (1.9) 15/8” (41.3) 1.36 (2.02)

B26H25 16 Ga. (1.5) 15/8” (41.3) 1.09 (1.62)

B32H25 12 Ga. (2.6) 13/8” (34.9) 1.65 (2.45)

B42H25 12 Ga. (2.6) 1” (25.4) 1.39 (2.07)

B52H25 12 Ga. (2.6) 13
/16” (20.6) 1.22 (1.81)
B54H25 14 Ga. (1.9) /16”
13 (20.6) .93 (1.38)
B56H25 16 Ga. (1.5) /16”
13 (20.6) .82 (1.22)

Reference page 14 for general fitting and standard finish specifications.

42

Channel & Combinations - Notes

Channel & Combinations

Strut Systems 43
s

Loading Chart
13/8”
(34.9)
Typ.

11/16

”
(101.6 / ”x
11 16
)
25/8”
H (17.5) x
(66.7)
Slots

Loading Chart

1”
(25.
4)

/ ”x
1 4

11/16” (6.3)
/ ”
1 2
/ ”
1 2
(38. x (17.5)
(38. 1) Slots
1)

Loading Chart

2”
(50.
8)

1”
(25. ” Dia.
9/32
4) Holes (7.1)
 1”
(25. ” Dia.
9/32
4) Holes (7.1)
H
neral fitting and standard finish specifications.
42 Strut Systems

Channel & Combinations - Notes

43
 Channel Nuts
Channel nuts are one of the main components of our metal framing system. It is designed to
provide essential gripping power and ease during installation. Channel nuts are press formed, machin
which meets the requirements of ASTM A108 or ASTM A36 for our larger sizes.
Bolts, Screws, and Nuts
All bolts, screws and nuts meet the physical and chemical requirements of ASTM A307, SAE J429 or AS
inch screw threads (coarse, UNC). ISO metric threads are also available on special request.
Recommended Torque

Bolt Size 1
/4”-20 5
/16”-18 3
/8”-16 1
/2”-13
Foot/Lbs. 6 11 19 50
Nm 8 15 26 68
Bolt Size M6x1 M8 x1.25 M10 x 1.5 M12x1.75
Nm 12 17 36 62
Foot/Lbs. 9 13 27 46

Materials & Finishes*

Finish
Code Finish Specification

PLN Plain ASTM A108/A307 Gr. A,

ASTM A563, SAE J429
ZN Electro-Plated Zinc ASTM B633 SC1 Type III
CZ Chromium Zinc ASTM F1136 Gr. 3
HDG Hot-Dipped Galvanized ASTM A153
SS6 Stainless Steel Type 316 MPIF 35/ASTM F593
AL Aluminum ASTM F468 S4
Channel Nuts & Hardware

*Unless otherwise noted.

Note: Channel nuts are not available in HDG, Aluminum, or Stainless Steel Type 304
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

44 Strut Systems
 n components of our metal framing system. It is designed to
r and ease during installation. Channel nuts are press formed, machined and hardened from steel
of ASTM A108 or ASTM A36 for our larger sizes.

the physical and chemical requirements of ASTM A307, SAE J429 or ASTM A563, and have unified
C). ISO metric threads are also available on special request.

lable in HDG, Aluminum, or Stainless Steel Type 304

parentheses. Unless noted, all metric dimensions are in millimeters.

44 Strut Systems
STANDARD CHANNEL NUTS
Numbering Example: N 7 25 (*) WO
Nut Type Channel Type Thread Size Stud Length Suffix
N = Standard Nut 7 = Tall Channels 21 = #8-32 * = Specify Length WO = Without Spring TN
= Twirl Nut B11 22 = #10-24 of stud below ** = Twirl Nuts or nuts SN =
Stud Nut B12 27 = #10-32 for Stud Nut or with springs have STN =
Stud Twirl Nut 2 = Medium Channels 24 = 1/4-20 Twirl Stud Nuts blank suffix
NW = Combo Nut B22 23 = 5/16-18 3
/4 = 3/4” Washer B24
28 = /8-16
3
1 = 1”
B26 26 = 7/16-14 11/4 = 11/4”
B32 25 = /2-13
1
11/2 = 11/2”
5 = Short Channels 55 = /8-11 B42
5
75 = 5/8-11
B52 78 = 7/8-9
B54 B56

METRIC CHANNEL NUTS

Numbering Example: BMS 6 M
Nut Metric Suffix
Type Thread Size
BMS = Spring Nut 3 = M3.5 S = Short Spring BMS-D =
Spring Nut (1/2” thick) 4 = M4 M = Medium Spring BMT = Twirl Nut
5 = M5 L = Long Spring
BMT-D = Twirl Nut (1/2” thick) 6 = M6 * = Twirl Nuts and nuts BMM
= Spring Nut (Mini channel) 8 = M8 without springs have
10 = M10 blank suffix 12 = M12
Channel Nuts & Hardware

SPRING NUT NUT WITHOUT SPRING TWIRL-NUT™ COMBO NUT WAS

STUD NUT WITH SPRING STUD NUT WITHOUT SPRING TWIRL STUD NUT
Reference page 44 for general fitting and standard finish specific
Strut Systems 45
 Suffix
Specify Length WO = Without Spring TN
ud below ** = Twirl Nuts or nuts SN =
d Nut or with springs have STN =
d Nuts blank suffix
= 3/4” Washer B24

TWIRL-NUT™ COMBO NUT WASHER

SPRING TWIRL STUD NUT
e 44 for general fitting and standard finish specifications.
45
 Note: See page 50 for res
NUT WITHOUT SPRING pull-out strength.

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

N221WO #8-32 All sizes except B62 & B72 /”

1 4 (6.3) 7.0
N227WO #10-32 All sizes except B62 & B72 /”
1 4 (6.3) 7.0
N222WO #10-24 All sizes except B62 & B72 /”
1 4 (6.3) 7.0
N224WO / -20
1 4
All sizes except B62 & B72 /”
1 4 (6.3) 6.7
N223WO / -18
5 16
All sizes except B62 & B72 /”
1 4 (6.3) 6.7
N228WO / -16
3 8
All sizes except B62 & B72 /”
3 8 (9.5) 9.3
N226WO / -14
7 16
All sizes except B62 & B72 /”
3 8 (9.5) 8.8
N225WO / -13
1 2
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 11.6
N525WO / -13
1 2
B42, B52, B54, B56 /”
3 8 (9.5) 8.8
N255WO / -11
5 8
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 16.4
N555WO / -11
5 8
B42, B52, B54, B56 /”
3 8 (9.5) 10.2
N275WO / -10
3 4
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 14.5
N575WO / -10
3 4
B42, B52, B54, B56 /”
3 8 (9.5) 8.8
N278WO / -9
7 8
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 12.5
Metric Threads
BMS-6 M6 x 1 All sizes except B62 & B72 /”
1 4 (6.3) 6.9
BMS-8 M8 x 1.25 All sizes except B62 & B72 /”
1 4 (6.3) 6.7
BMS-10 M10 x 1.5 All sizes except B62 & B72 /”
3 8 (9.5) 9.6
BMS-12 M12 x 1.75 All sizes except B62 & B72 /”
3 8 (9.5) 9.2
BMS-D-12 M12 x 1.75 B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 12.2
Channel Nuts & Hardware

Note: For mini channel nut information see page 203.

Reference page 44 for general fitting and standard finish specifications.
46
 Note: See page 50 for resistance to slip & page 51 for
pull-out strength.

Wt./C
Lbs. kg

(3.17)
(3.17)
(3.17)
(3.04)
(3.04)
(4.22)
(3.99)
(5.26)
(3.99)
(7.44)
(4.62)
(6.58)
(3.99)
(5.67)

(3.13)
(3.04)
(4.35)
(4.17)
(5.53)

page 203.
ns.
Strut Systems
 Note: See page 50 for resistance to slip & page 700 200
51 for pull-out strength. Series Series
SPRING NUT

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

N721 #8-32 B11 & B12 1

/4” (6.3) 7.0
N221 #8-32 B22, B24, B26, B32 1
/4” (6.3) 7.0
N521 #8-32 B42, B52, B54, B56 1
/4” (6.3) 7.0
N727 #10-32 B11 & B12 1
/4” (6.3) 7.0
N227 #10-32 B22, B24, B26, B32 1
/4” (6.3) 7.0
N527 #10-32 B42, B52, B54, B56 1
/4” (6.3) 7.0
N722 #10-24 B11 & B12 1
/4” (6.3) 7.0
N222 #10-24 B22, B24, B26, B32 1
/4” (6.3) 7.0
N522 #10-24 B42, B52, B54, B56 1
/4” (6.3) 7.0
N724 1
/4-20 B11 & B12 1
/4” (6.3) 6.7
N224 1
/4-20 B22, B24, B26, B32 1
/4” (6.3) 6.7
N524 1
/4-20 B42, B52, B54, B56 1
/4” (6.3) 6.7
N723 5/16-18 B11 & B12 1
/4” (6.3) 6.7
N223 5/16-18 B22, B24, B26, B32 1
/4” (6.3) 6.7
N523 5/16-18 B42, B52, B54, B56 1
/4” (6.3) 6.7
N728 3
/8-16 B11 & B12 3
/8” (9.5) 9.3
N228 3
/8-16 B22, B24, B26, B32 3
/8” (9.5) 9.3
N528 3
/8-16 B42, B52, B54, B56 3
/8” (9.5) 9.3
N726 7
/16-14 B11 & B12 3
/8” (9.5) 8.8
N226 7
/16-14 B22, B24, B26, B32 3
/8” (9.5) 8.8
N526 7
/16-14 B42, B52, B54, B56 3
/8” (9.5) 8.8
N725 1
/2-13 B11 & B12 1
/2” (12.7) 11.6
N225 1
/2-13 B22, B24, B26, B32 1
/2” (12.7) 11.6
N525 1
/2-13 B42, B52, B54, B56 3
/8” (9.5) 8.8
N755 5
/8-11 B11 & B12 1
/2” (12.7) 16.4
N255 5
/8-11 B22, B24, B26, B32 1
/2” (12.7) 16.4
N555 5
/8-11 B42, B52, B54, B56 3
/8” (9.5) 10.2
N775 3
/4-10 B11 & B12 1
/2” (12.7) 14.5
N275 3
/4-10 B22, B24, B26, B32 1
/2” (12.7) 14.5
N575 3
/4-10 B42, B52, B54, B56 3
/8” (9.5) 8.8
N778 7
/8-9 B11 & B12 1
/2” (12.7) 12.5
N278 7
/8-9 B22, B24, B26, B32 1
/2” (12.7) 12.5
Metric Threads
BMS-6L M6 x 1 B11 & B12 1
/4” (6.3) 6.9
BMS-6M M6 x 1 B22, B24, B26, B32 1
/4” (6.3) 6.9
BMS-6S M6 x 1 B42, B52, B54, B56 1
/4” (6.3) 6.9
BMS-8L M8 x 1.25 B11 & B12 1
/4” (6.3) 6.7
BMS-8M M8 x 1.25 B22, B24, B26, B32 1
/4” (6.3) 6.7
BMS-8S M8 x 1.25 B42, B52, B54, B56 1
/4” (6.3) 6.7
BMS-10L M10 x 1.5 B11 & B12 3
/8” (9.5) 9.6
BMS-10M M10 x 1.5 B22, B24, B26, B32 3
/8” (9.5) 9.6
BMS-10S M10 x 1.5 B42, B52, B54, B56 3
/8” (9.5) 9.6
BMS-12M M12 x 1.75 B22, B24, B26, B32 3
/8” (9.5) 9.2
BMS-12S M12 x 1.75 B42, B52, B54, B56 3
/8” (9.5) 9.2
BMS-D-12L M12 x 1.75 B11 & B12 1
/2” (12.7) 12.2
BMS-D-12M M12 x 1.75 B22, B24, B26, B32 1
/2” (12.7) 12.2
Channel Nuts & Hardware

Note: For mini channel nut information see page 203.

Reference page 44 for general fitting and standard finish specifica
Strut Systems 47
 200 500
Series Series

Wt./C
Lbs. kg

(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.17)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(3.04)
(4.22)
(4.22)
(4.22)
(3.99)
(3.99)
(3.99)
(5.26)
(5.26)
(3.99)
(7.44)
(7.44)
(4.62)
(6.58)
(6.58)
(3.99)
(5.67)
(5.67)

(3.13)
(3.13)
(3.13)
(3.04)
(3.04)
(3.04)
(4.35)
(4.35)
(4.35)
(4.17)
(4.17)
(5.53)
(5.53)
page 203.
ng and standard finish specifications.
47
 TWIRL-NUT™ Note: See
page 50 for
TWIRL STUD NUT resistance to
slip & page 51
for pull-out
strength.
Note: See
page 50 for
resistance to
slip & page 51
for pull-out
strength.

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

TN221 #8-32 All sizes except B62 & B72 /”

1 4 (6.3) 7.0
TN227 #10-32 All sizes except B62 & B72 /”
1 4 (6.3) 7.0
TN222 #10-24 All sizes except B62 & B72 /”
1 4 (6.3) 7.0
TN224 / -20
1 4
All sizes except B62 & B72 /”
1 4 (6.3) 6.7
TN223 / -18
5 16
All sizes except B62 & B72 /”
1 4 (6.3) 6.7
TN228 / -16
3 8
All sizes except B62 & B72 /”
3 8 (9.5) 9.3
TN226 / -14
7 16
All sizes except B62 & B72 /”
3 8 (9.5) 8.8
TN225 / -13
1 2
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 11.6
TN525 / -13
1 2
B42, B52, B54, B56 /”
3 8 (9.5) 8.8
TN255 / -11
5 8
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 11.0
Metric BMT-6 M6 x 1 All sizes except B62 & B72 /”
1 4 (6.3) 6.9
Threads BMT-8 M8 x 1.25 All sizes except B62 & B72 /”
1 4 (6.3) 6.7
BMT-10 M10 x 1.5 All sizes except B62 & B72 /”
3 8 (9.5) 9.6
BMT-12 M12 x 1.75 All sizes except B62 & B72 /”
3 8 (9.5) 9.2
BMT-D-12 M12 x 1.75 B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 12.2
Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

STN224-* / -20
1 4
All sizes except B62 & B72 /”
1 4 (6.3) 8.1 (3.66)
 STN228-* / -16
3 8
All sizes except B62 & B72 /”
3 8 (9.5) 12.9 (5.85)
STN225-* / -13
1 2
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 18.2 (8.23)
STN525-* / -13
1 2
B42, B52, B54, B56 /”
3 8 (9.5) 15.4 (6.96)
Channel Nuts & Hardware

*Note: Add stud length in inches (3/4, 1, 11/4, 11/2)

Note: See page 50 for resistance to slip& page 51 for pull-out strength.

STUD NUT WITHOUT SPRING

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

SN224-*WO / -20
1 4
All sizes except B62 & B72 /”
1 4 (6.3) 8.1 (3.66)
SN228-*WO / -16
3 8
All sizes except B62 & B72 /”
3 8 (9.5) 12.9 (5.85)
SN225-*WO / -13
1 2
B11, B12, B22, B24, B26, B32 /”
1 2 (12.7) 18.2 (8.23)
SN525-*WO / -13
1 2
B42, B52, B54, B56 /”
3 8 (9.5) 15.4 (6.96)
*Note: Add stud length in inches ( /4, 1, 1 /4, 1 /2)
3 1 1

Reference page 44 for general fitting and standard finish specifications.

48
 Wt./C
Lbs. kg

7.0 (3.17)
7.0 (3.17)
7.0 (3.17)
6.7 (3.04)
6.7 (3.04)
9.3 (4.22)
8.8 (3.99)
11.6 (5.26)
8.8 (3.99)
11.0 (4.99)
6.9 (3.13)
6.7 (3.04)
9.6 (4.35)
9.2 (4.17)
12.2 (5.53)
Strut Systems
 Note: See page 50 for resistance to slip & page
51 for pull-out strength.
STUD NUT WITH SPRING

700 200
Series Series

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

SN724-* / -20
1 4
B11 & B12 /”
1 4 (6.3) 8.1 (3.66)
SN224-* / -20
1 4
B22, B24, B26, B32 /”
1 4 (6.3) 8.1 (3.66)
SN524-* / -20
1 4
B42, B52, B54, B56 /”
1 4 (6.3) 8.1 (3.66)
SN728-* / -16
3 8
B11 & B12 /”
3 8 (9.5) 12.9 (5.85)
SN228-* / -16
3 8
B22, B24, B26, B32 /”
3 8 (9.5) 12.9 (5.85)
SN528-* / -16
3 8
B42, B52, B54, B56 /”
3 8 (9.5) 12.9 (5.85)
SN725-* / -13
1 2
B11 & B12 /”
1 2 (12.7) 18.2 (8.23)
SN225-* / -13
1 2
B22, B24, B26, B32 /”
1 2 (12.7) 18.2 (8.23)
SN525-* / -13
1 2
B42, B52, B54, B56 /”
3 8 (9.5) 15.4 (6.96)
*Note: Add stud length in inches ( /4, 1, 1 /4, 1 /2)
3 1 1

• Finish: Electrodeposited zinc ASTM B633 SC1

• Available in 316 stainless steel - add SS6 to part number
• To lock combo nut washer in place a nex nut (sold separately) is required
Note: See page 50 for resistance to slip
& page 51 for pull-out strength. Patent Number 7,604,444
Channel Nuts & Hardware

COMBO NUT WASHER

Part No. Thread Size Fits Channel Sizes Nut Thickness Wt./C
Lbs. kg

NW524 / -20
1 4
All Channel Sizes /”
1 4 (6.3) 11.9 (5.40)
NW528 / -16
3 8
All Channel Sizes /”
3 8 (9.5) 13.8 (6.26)
NW525 / -13
1 2
All Channel Sizes /”
3 8 (9.5) 13.1 (5.94)
NWM6 M6 All Channel Sizes /”
1 4 (6.3) 16.6 (7.50)
NWM8 M8 All Channel Sizes /”
1 4 (6.3) 15.4 (7.00)
NWM10 M10 All Channel Sizes /”
3 8 (9.5) 18.9 (8.57)
NWM12 M12 All Channel Sizes /”
3 8 (9.5) 17.7 (8.00)
 Reference page 44 for general fitting and standard finish specifica
Strut Systems 49
 500
Series

Wt./C
bs. kg

(3.66)
(3.66)
(3.66)
(5.85)
(5.85)
(5.85)
(8.23)
(8.23)
(6.96)

Wt./C
bs. kg

(5.40)
(6.26)
(5.94)
(7.50)
(7.00)
(8.57)
(8.00)
standard finish specifications.
 Resistance to Slip
Thread Nut Part

Size Numbers 12 ga. Channel 14 ga. Channel

Lbs. N Lbs. N

#8-32 N221, N221WO,N521, N721, TN221 50 220 50 220

#10-24 N222, N222WO, N522, N722, TN222 100 440 100 440

#10-32 N227, N227WO, N527, N727, TN227 100 440 100 440

NW524*, N224, N224WO, N524, N724,

1
/4”-20 TN224, STN224, SN224WO, SN224, SN524, 300 1330 300 1330
SN724
/16”-18
5 N223, N223WO, N523, N723, TN223 450 2000 450 2000

NW528*, N228, N228WO, N528, N728

3
/8”-16 TN228, STN228, SN228WO, SN228, SN528, 800 3560 600 2670
SN728
/16”-14
7 N226, N226WO, N526, N726, TN226 1000 4450 800 3560

N225, N225WO, N725, TN225,

1500 6670 1000 4450
1
/2”-13 STN225, SN225WO, SN225, SN725
NW525*, N525, N525WO, TN525, 1500 6670 1000 4450
STN525, SN525WO, SN525
5
/8”-11 N255, N255WO, N755, TN255 1500 6670 1000 4450
N555, N555WO 1500 6670 1000 4450
3
/4”-10 N275, N275WO, N775 1500 6670 1000 4450
N575, N575WO 1500 6670 1000 4450
/8”-9
7 N278, N278WO, N778 1500 6670 1000 4450
M6 x 1 BMS-6, BMS-6L, BMS-6M, 300 1330 300 1330
BMS-6S, BMT-6
M8 x 1.25 BMS-8, BMS-8L, BMS-8M, 450 2000 450 2000
BMS-8S, BMT-8
M10 x 1.50 BMS-10, BMS-10L, BMS-10M, 800 3560 600 2760
Channel Nuts & Hardware Metric Threads

BMS-10S, BMT-20
BMS-D-12, BMS-D-12L, 1500 6670 1000 4450
M12 x 1.75 BMS-D-12M, BMT-D-12
BMS-12, BMS-12M, BMS-12S, BMT-12 1500 6670 1000 4450

Note: For mini channel nut information see page 203.

Reference page 44 for general fitting and standard finish specifications.
50

* Combo Nut Washer (see page 49)

Note: When using stainless steel, reduce
slip load by 50% due to hardness of
material.
* Combo Nut Washer (see page 49)
Note: When using stainless steel, reduce
slip load by 50% due to hardness of
material.

Resistance to Slip
of Channel Nut
ce to Slip

16 ga. Channel
Lbs. N

50 220

100 440

100 440

300 1330

450 2000

600 2670

800 3560

1000 4450

1000 4450

1000 4450
1000 4450
1000 4450
1000 4450
1000 4450
300 1330

450 2000

600 2760

1000 4450

1000 4450

Strut Systems
 • Maximum pullout strength for B11 & B12 channels is limited to 1500 lbs. (6670 N).
Pull-Out Strength
Thread Nut Part

Size Numbers 12 ga. Channel 14 ga. Channel

Lbs. N Lbs. N

#8-32 N221, N221WO,N521, N721, TN221 200 890 200 890

#10-24 N222, N222WO, N522, N722, TN222 250 1110 250 1110

#10-32 N227, N227WO, N527, N727, TN227 250 1110 250 1110

NW524*, N224,N224WO, N524, N724,

1
/4”-20 TN224, STN224, SN224WO, SN224, SN524, 450 2000 450 2000
SN724
/16”-18
5 N223, N223WO, N523, N723, TN223 750 3330 750 3330

NW528*, N228, N228WO, N528, N728

3
/8”-16 TN228, STN228, SN228WO, SN228, SN528, 1100 4890 1000 4450
SN728
/16”-14
7 N226, N226WO, N526, N726, TN226 1500 6670 1200 5340

N225, N225WO, N725, TN225,

2000 8900 1400 6230
1
/2”-13 STN225, SN225WO, SN225, SN725
NW525*, N525, N525WO, TN525, 1500 6670 1400 6230
STN525, SN525WO, SN525
5
/8”-11 N255, N255WO, N755, TN255 2000 8900 1400 6230
N555, N555WO 1500 6670 1400 6230
3
/4”-10 N275, N275WO, N775 2000 8900 1400 6230
N575, N575WO 1500 6670 1400 6230
/8”-9
7 N278, N278WO, N778 1500 6670 1400 6230
M6 x 1 BMS-6, BMS-6L, BMS-6M, 450 2000 450 2000
BMS-6S, BMT-6
M8 x 1.25 BMS-8, BMS-8L, BMS-8M, 750 3330 750 3330
BMS-8S, BMT-8
M10 x 1.50 BMS-10, BMS-10L, BMS-10M, 1100 4890 1000 4450
BMS-10S, BMT-20
BMS-D-12, BMS-D-12L, 2000 8900 1400 6230
M12 x 1.75 BMS-D-12M, BMT-D-12
BMS-12, BMS-12M, BMS-12S, BMT-12 1500 6670 1400 6230
Channel Nuts & Hardware

* Combo Nut Washer (see page 49) Pull-Out Strength of

Note: When using stainless steel, reduce slip load by 50% due to hardness of
material.
Note: For mini channel nut information see page 203.
 Reference page 44 for general fitting and standard finish specific
Strut Systems 51
Strength

16 ga. Channel
Lbs. N

200 890

250 1110

250 1110

450 2000

750 3330

1000 4450

1000 4450

1000 4450

1000 4450

1000 4450
1000 4450
1000 4450
1000 4450
1000 4450
450 2000

750 3330

1000 4450

1000 4450

1000 4450

Pull-Out Strength of Channel Nut

nd standard finish specifications.
 DCN 3/8
DOUBLE CONVEYOR NUT
• Recommended torque - 19 ft./Lbs.
• Allowable slip loading - 700 Lbs.(3.11kN)
• Safety Factor of 3
• Material: ASTM 1011SS Gr. 33
• Finish: Electrodeposited zinc ASTM B633 SC1
• Strut ordered separately (76.
2)

3” A D
Threa
B501 SERIES d Size Hex Nu
U-BOLT B C
Included
• Designed for use with Rigid Conduit or Iron Pipe
• Dimension “C” is dependent on the type of pipe or conduit supported and
is a reference only
Design Load Wt./C
Part No. A B C D Lbs. kN Lbs. kg

B501-1/2 15
/16” (23.8) 13/4” (44.4) 11/2” (38.1) 5
/16”-18 600 (2.67) 12 (5.4)
B501-3/4 11/8” (28.6) 13/4” (44.4) 15/8” (41.3) 5
/16”-18 600 (2.67) 13 (5.9)
B501-1 13/8” (29.9) 17/8” (47.6) 15/8” (41.3) 5
/16”-18 900 (4.00) 14 (6.3)
B501-11/4 123/32” (43.6) 13/4” (44.4) 115/32” (37.3) 5
/16”-18 900 (4.00) 15 (6.8)
B501-11/2 2” (50.8) 13/4” (44.4) 17/16” (36.5) 5
/16”-18 900 (4.00) 16 (7.2)
B501-2 27/16” (61.9) 21/16” (52.4) 17/8” (47.6) 3
/8”-16 1200 (5.34) 27 (12.2)
B501-21/2 215/16” (74.6) 21/16” (52.4) 113/16” (46.0) 3
/8”-16 1200 (5.34) 32 (14.5)
B501-3 39/16” (90.5) 2” (50.8) 13/4” (44.4) 3
/8”-16 1800 (8.00) 36 (16.3)
B501-31/2 43/32” (94.6) 2” (50.8) 123/32” (43.6) 3
/8”-16 1800 (8.00) 38 (17.2)
B501-4 419/32” (116.7) 21/4” (57.1) 121/32” (50.0) 3
/8”-16 1800 (8.00) 42 (19.0)
B501-5 521/32” (143.6) 21/4” (57.1) 2” (50.8) 1
/2”-13 2400 (10.70) 92 (41.7)
B501-6 63/4” (171.4) 25/8” (66.7) 23/8” (60.3) 5
/8”-11 2400 (10.70) 176 (79.8)
B501-8 83/4” (222.2) 25/8” (66.7) 23/8” (60.3) 5
/8”-11 2400 (10.70) 191 (86.6)
Channel Nuts & Hardware

B500 SERIES
SQUARE U-BOLT
• Includes:
1 pc. U-Bolt only 121/32
2 pcs. 3/8”-16 Hex Nuts ”
• Additional sizes available 21/2” (42.1)
• Standard finish: ZN, SS4 (63.5)

3
/8”-16
Threads
Channel Wt./C
Part No. A Size Lbs. kg

B500-3-3/8 33/8” (85.7) 15/8” x 15/8” 25 (11.3)

B500-5 5” (127.0) 31/4” x 15/8” 33 (14.9)
Reference page 44 for general fitting and standard finish specifications.
52
 2”
(50. 1/2”
8) (12.
7)

13 /8
”
(34.9
Hex )Nuts

Included

3
/8”-16
Threads
s.
Strut Systems
HHCS SFHMS
HEX HEAD CAP SCREWS SLOTTED FLAT HEAD MACHINE SCREWS
• Standard finish: Zinc-Plated, Stainless Steel • Standard finish: Zinc-Plated

SHHMS
SLOTTED (COMBINATION RECESS) HEX HEAD MACHINE
SCREWS
• Standard finish: Zinc-Plated, Stainless Steel

Part No.

SRHMS 1
/4” x 3/4” SHHMS
SLOTTED ROUND HEAD MACHINE SCREWS 1
/4” x 1” SHHMS
• Standard finish: Zinc-Plated 1
/4” x 11/4” SHHMS
1
/4” x 11/2” SHHMS
5
/16” x 1” SHHMS
5
/16” x 11/4” SHHMS
5
/16” x 11/2” SHHMS
3
/8” x 11/4” SHHMS
Wt./C 3
/8” x 11/2” SHHMS
Part No. Lbs. kg
1
/4” x /2” SRHMS
1
.9 (.41) CNP
1
/4” x 3/4” SRHMS 1.2 (.54) SQUARE HEAD CONE POINT SET SCRE
1
/4” x 1” SRHMS 1.5 (.68) • Standard finish:
1
/4” x 11/4” SRHMS 1.7 (.77) W
1
/4” x 11/2” SRHMS 1.9 (.86) Part No. Lbs.
5
/16” x 1” SRHMS 2.5 (1.13) 3
/8” x 11/2” CNPSS 4.7 (2
5
/16” x 11/4” SRHMS 2.9 (1.31) 3
/8” x 2” CNPSS 6.0 (2
5
/16” x 11/2” SRHMS 3.3 (1.49) 1
/2” x 11/2” CNPSS 9.2 (4
3
/8” x 1” SRHMS 4.0 (1.81) 1
/2” x 2” CNPSS 11.4 (5
3
/8” x 11/4” SRHMS 4.5 (2.04) 1
/2” x 21/2” CNPSS 13.7 (6
3
/8” x 11/2” SRHMS 5.1 (2.31) 5
/8” x 2” CNPSS 19.0 (8
3
/8” x 2” SRHMS 6.3 (2.86) 5
/8” x 21/2” CNPSS 22.6 (10
3
/8” x 21/4” SRHMS 7.1 (3.22)
3
/8” x 21/2” SRHMS 7.7 (3.49)
 Wt./C
Part No. Lbs. kg
1
/4” x /2” HHCS
1
1.3 (0.59)
1
/4” x 3/4” HHCS 1.4 (0.63)
1
/4” x 1” HHCS 1.7 (0.77)
1
/4” x 11/4” HHCS 2.1 (0.95)
1
/4” x 11/2” HHCS 2.4 (1.09)
5
/16” x 1” HHCS 2.8 (1.27)
5
/16” x 11/4” HHCS 3.2 (1.45)
5
/16” x 11/2” HHCS 3.8 (1.72)
3
/8” x 3/4” HHCS 3.4 (1.54)
3
/8” x 1” HHCS 4.1 (1.86)
3
/8” x 11/4” HHCS 4.7 (2.13)
3
/8” x 11/2” HHCS 5.2 (2.36)
3
/8” x 13/4” HHCS 5.9 (2.67)
3
/8” x 2” HHCS 7.0 (3.17)
3
/8” x 21/4” HHCS 7.8 (3.54)
3
/8” x 21/2” HHCS 8.5 (3.85)
1
/2” x 7/8” HHCS 8.0 (3.63)
1
/2” x 1” HHCS 8.4 (3.81)
1
/2” x 11/4” HHCS 9.2 (4.17)
1
/2” x 11/2” HHCS 10.1 (4.58)
1
/2” x 13/4” HHCS 12.0 (5.44)
1
/2” x 2” HHCS 13.2 (5.99)
1
/2” x 21/2” HHCS 16.0 (7.26)
Wt./C
Part No. Lbs. kg

1
/4” x 1/2” SFHMS 1.1 (0.50)
1
/4” x 5/8” SFHMS 1.2 (0.54)
1
/4” x 3/4” SFHMS 1.4 (0.63)
5
/16” x 1” SFHMS 2.8 (1.27)
3
/8” x 11/2” SFHMS 5.6 (2.54)
3
/8” x 2” SFHMS 6.7 (3.04)
3
/8” x 21/4” SFHMS 7.3 (3.31)
3
/8” x 21/2” SFHMS 7.9 (3.58)
1
/2” x 1” SFHMS 5.9 (2.67)
1
/2” x 11/4” SFHMS 7.0 (3.17)
1
/2” x 11/2” SFHMS 8.3 (3.76)
1
/2” x 21/2” SFHMS 13.8 (6.26)
Channel Nuts & Hardware
 Reference page 44 for general fitting and standard finish specific
Strut Systems 53
MACHINE SCREWS
Plated

ON RECESS) HEX HEAD MACHINE

Plated, Stainless Steel

Wt./C
Lbs. kg

1.2 (0.54)
1.5 (0.68)
1.8 (0.80)
2.0 (0.91)
2.6 (1.18)
3.1 (1.40)
3.4 (1.54)
4.6 (2.08)
5.3 (2.40)

CNPSS
RE HEAD CONE POINT SET SCREWS
• Standard finish: ZN
Wt./C
Part No. Lbs. kg
CNPSS 4.7 (2.13)
PSS 6.0 (2.72)
CNPSS 9.2 (4.17)
PSS 11.4 (5.17)
CNPSS 13.7 (6.21)
PSS 19.0 (8.62)
CNPSS 22.6 (10.25)
al fitting and standard finish specifications.
53
 B446A B446B
SWIVEL HANGER (FEMALE ONLY) SWIVEL HANGER (MALE ONLY)
• Design Load: • Design Load:
(3/8)-610 Lbs. (2.71 kN) (3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN) (1/2)-1130 Lbs. (5.02 kN)
• Safety Factor of 3 • Safety Factor of 3
• Standard finish: ZN • Standard finish: ZN
A R 13/4”
1 / 4”
3 (44.4)
(44.4) R B

B446C B4
SWIVEL HANGER (FEMALE-FEMALE) SWIVEL HANGER (FEMALE-MA
• Design Load: • Design Lo
(3/8)-610 Lbs. (2.71 kN) (3/8)-610 Lbs. (2.71
(1/2)-1130 Lbs. (5.02 kN) (1/2)-1130 Lbs. (5.02
• Safety Factor of 3 • Safety Factor
• Standard finish: ZN • Standard finish
23/4” 2
(69.8) (6
A
A
(2

Wt./C
Part No. A Lbs. kg
B446C- /8
3 3
/8”-16 HN 26 (11.8) B446-3/8 /8”-16 HN
3
/8”-16 HHCS
3
28 (12.7)
B446C-1/2 1
/2”-13 HN 31 (14.0)

Wt./C
Part No. A R Lbs. kg

B446A-3/8 3
/8”-16 HN /32”
9 (7.1) 13 (5.9)
B446A-1/2 /2”-13 HN
1 3
/8” (9.5) 15 (6.8)
Wt./C
Part No. A R Lbs. kg

B446B-3/8 3
/8”-16 HHCS 9
/32” (7.1) 16 (7.2)
B446B-1/2 1
/2”-13 HHCS 3
/8” (9.5) 20 (9.1)
Channel Nuts & Hardware

Reference page 44 for general fitting and standard finish specifications.

54
B446B
SWIVEL HANGER (MALE ONLY)
• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
• Safety Factor of 3
• Standard finish: ZN
13/4”
(44.4)
R B

B446
SWIVEL HANGER (FEMALE-MALE)
• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
• Safety Factor of 3
• Standard finish: ZN
23/4”
(69.8)
A
1”
(25.4)
B

Wt./C
Part No. A B Lbs. kg
B446- /83 3
/8”-16 HN /8”-16 HHCS
3
28 (12.7)
B446-1/2 1
/2”-13 HN /2”-13 HHCS
1
36 (16.3)
al fitting and standard finish specifications.
54 Strut Systems
 B617
SHOULDER BOLT
• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)
/8”-16 Thread Size
3

2”
(50.8)

HN
HEX NUTS
• Standard finish: Zinc-Plated, Stainless Steel

Wt./C
Part No. Lbs. kg

1
/4” HN 0.7 (0.32)
5
/16” HN 1.0 (0.45)
3
/8” HN 1.5 (0.68)
1
/2” HN 3.6 (1.63)
5
/8” HN 7.2 (3.26)
3
/4” HN 11.1 (5.03)
7
/8” HN 17.9 (8.12)
1” HN 27.2 (12.34)
Channel Nuts & Hardware

SQN
SQUARE NUTS
• Standard finish: Zinc-Plated

Wt./C
Part No. Lbs. kg

1
/2” SQN 5.7 (2.58)
5
/8” SQN 10.1 (4.58)
Reference page 44 for general fitting and standard finish specific
Strut Systems 55
 Fig. 75
SWIVEL ATTACHMENT
• Standard finish: ZN
• Sized for 3/8”-16 threaded rods
• UL Listed to support up to 4” Pipe per NFPA 13
• Wt./C 13 Lbs. (5.9 kg)

MSQN
MACHINE SQUARE NUT
• For use with B755 Beam Clamp
• Standard finish: Zinc-Plated

Wt./C
Part No. Lbs. kg

MSQN 1/4” .6 (.27)

MSQN 5/16” 1.2 (.54)
MSQN 3/8” 1.8 (.81)
Reference page 44 for general fitting and standard finish specifications.
55
 Buzznut™
• Can be installed at any desired position on the ATR, eliminating the need to thread hex nuts up along ATR.
• Loading Safety Factor of 3.
• Torque: 6 ft./lbs (8 Nm)
• Available in Zinc Plated or 316 stainless steel.

Part No. Thread Size Loading Wt./C

Lbs. kN Lbs. kg

SLWN1/4 / -20
1 4
240 (1.07) 14.4 (6.5)
SLWN3/8 / -16
3 8
730 (3.24) 15.4 (7.0)
SLWN1/2 / -13
1 2
1350 (6.00) 18.8 (8.5)
SLWN5/8 / -11
5 8
2100 (9.33) 25.4 (11.5)
SLWNM6 M6 200 (0.90) 14.1 (6.4)
SLWNM8 M8 380 (1.70) 16.3 (7.4)
SLWNM10 M10 584 (2.60) 17.2 (7.8)
SLWNM12 M12 840 (3.70) 18.9 (8.6)

FW FFW
FLAT WASHERS FLAT FENDER WASHERS
• Standard finish: Zinc-Plated, Stainless Steel • Standard finish: Zinc-Plated
O.D.

O.D. Outside Dia. Wt./C Wt./C

Part No. in. mm Lbs. kg Part No. Lbs. kg
1
/4” FW /64”
47
(18.7) .7 (.32) 1
/4” x 11/4” FFW 2.2 (1.00)
5
/16” FW 7
/8” (22.2) 1.4 (.63) 1
/4” x 11/2” FFW 3.1 (1.40
3
/8” FW 1” (25.4) 1.7 (.77) 3
/8” x 11/4” FFW 2.0 (.91)
1
/2” FW 13/8” (34.9) 3.9 (1.77) 3
/8” x 11/2” FFW 3.0 (1.36
5
/8” FW 115/32” (37.3) 6.4 (2.90) 1
/2” x 2” FFW 5.4 (2.45)
3
/4” FW 2” (50.8) 10.9 (4.94)
7
/8” FW 21/4” (57.1) 13.4 (6.08)
1” FW 21/2” (63.5) 18.8 (8.53)
Channel Nuts & Hardware

LW
LOCK WASHERS
• Standard finish: Zinc-Plated, Stainless Steel

Wt./C
Part No. Lbs. kg

1
/4” LW 0.3 (0.13)
5
/16” LW 0.4 (0.18)
3
/8” LW 0.6 (0.27)
1
/2” LW 1.3 (0.59)
5
/8” LW 2.4 (1.09)
3
/4” LW 3.8 (1.72)
7
/8” LW 5.9 (2.67)
1” LW 8.8 (3.99)
Reference page 44 for general fitting and standard finish specifications.
56
ating the need to thread hex nuts up along ATR.

ENDER WASHERS
ard finish: Zinc-Plated

Lbs. kg
1
/4” x 11/4” FFW 2.2 (1.00)
1
/4” x 11/2” FFW 3.1 (1.40)
3
/8” x 11/4” FFW 2.0 (.91)
3
/8” x 11/2” FFW 3.0 (1.36)
1
/2” x 2” FFW 5.4 (2.45)
rd finish specifications.
Strut Systems
 SC228 HANGER ROD S
N2
C
STIFFENER 2
28
• For 3/8” thru 5/8” ATR W
2
• Strut ordered separately O
8 3
/8
• Standard finish: ZN B
”-
• Wt./C 21 Lbs. (9.5 kg) 1 16
1
Thr
/ ea
2 ds
” SC
( 22
6 8B
3 S
.
Fig. 98
ROD STIFFENER
• For 3/8” thru 7/8” ATR
• Use with 12 ga. strut only, ordered separately
• Secures channel to hanger rod for vertical seismic bracing
• Standard finish: ZN
• Wt./C 11 Lbs. (5.0 kg)

Fig. 98B
ROD STIFFENER w/BREAK-OFF BOLT HEAD
• For 3/8” thru 7/8” ATR
• Use with 12 ga. strut only, ordered separately
• Secures channel to hanger rod for vertical seismic bracing
• Uses a snap-off bolt head
• Standard finish: ZN
• Wt./C 13 Lbs. (5.9 kg)
Channel Nuts & Hardware

SC-UB /8”-16 Hex Nuts

3

HANGER ROD STIFFENER

• For 3/4” thru 7/8” ATR
• Strut ordered separately
• Includes: (1) B3188-11/2WO U-Bolt
(2) 3/8”-16 Hex Nuts
(1) 2-Hole Plate
2-Hole Plate
• Standard finish: ZN 1
/4” (6mm) x 15/8” (41mm) x 31/2” (89mm)
• Wt./C 50 Lbs. (22.7 kg) B3188-1
Stiffner Channel
All Threaded Rod (ATR)
Reference page 44 for general fitting and standard finish specifica
Strut Systems 57
Hex Nuts

B3188-11/2” WO U-Bolt

d (ATR)
nd standard finish specifications.
 ATR
ALL THREADED ROD
• Available in 36” (91.4 cm), 72” (182.9 cm), 120” (304.8 cm), 144” (365.7 cm) lengths
• Safety Factor of 5 on recommended load
• Standard finish: Zinc-Plated, Stainless Steel Type 304

Part No. Threads Recommended Load Wt./C Ft. (3048.0 cm)

& Size Per Inch Lbs. kN Lbs. kg

ATR 1/4” 20 240 (1.07) 12 (5.44)

ATR 5/16” 18 400 (1.78) 19 (8.62)
ATR 3/8” 16 730 (3.24) 29 (13.15)
ATR 1/2” 13 1350 (6.00) 53 (24.04)
ATR 5/8” 11 2160 (9.60) 89 (40.37)
ATR 3/4” 10 3230 (14.37) 123 (55.79)
ATR 7/8” 9 4480 (19.93) 170 (77.11)
ATR 1” 8 5900 (26.24) 225 (102.06)

B655 ROD COUPLING

B656 REDUCER ROD COUPLING
• Load rating for each coupler meets All Threaded Rod value
• Standard finish: Zinc-Plated, Stainless Steel Type 304

Recommended
Part No. Size Load Length Wt./C
Lbs. kN Lbs. kg

B655-1/4 /4”-20
1
240 (1.07) /8” (22.2)
7
1.9 (0.86)
B655-5/16 5
/16”-18 380 (1.69) /8”7(22.2) 1.8 (0.81)
B655-3/8 3
/8”-16 730 (3.24) 1 /8” (28.6)
1
3.6 (1.63)
B655-1/2 1
/2”-13 1350 (6.00) 13/4” (44.4) 11.3 (5.12)
B655-5/8 5
/8”-11 1810 (8.05) 21/8” (54.0) 17.6 (7.98)
B655-3/4 3
/4”-10 2710 (12.05) 21/4” (57.1) 28.1 (12.74)
B655-7/8 7
/8”-9 3770 (16.77) 21/2” (63.5) 57.2 (25.94)
B655-1 1”-8 4960 (22.06) 2 /4” (69.8)
3
73.7 (33.43)
Recommend
Part No. Size ed Load Length Wt./C
Lbs. kN Lbs. kg

B656-3/8 x 1/4 3
/8”-16 & 1/4”-20 240 (1.07) 1” (25.4) 3.7 (1.68)
B656-1/2 x 3/8 1
/2”-13 & 3/8”-16 730 (3.24) 11/4” (31.7) 6.6 (2.99)
B656-5/8 x 1/2 5
/8”-11 & 1/2”-13 1350 (6.00) 11/4” (31.7) 11.6 (5.26)
B656-3/4 x 5/8 3
/4”-10 & 5/8”-11 1810 (8.05) 11/2” (38.1) 20.6 (9.34)
B656-7/8 x 3/4 7
/8”-9 & 3/4”-10 2710 (12.05) 13/4” (44.4) 39.4 (17.87)
Channel Nuts & Hardware
 BHR SERIES
HOT RODS FOR TRAPEZE HANGERS
• 12” length of threaded rod completely assembled with rod coupling, locking hex nuts, square washer, and chan
• Standard finish: Zinc-Plated

Recommended
Part No. Rod Size Load Wt./C
Lbs. kN Lbs. kg

BHR1225ZN 1
/4”-20 240 (1.07) 41 (18.6)
BHR1238ZN 3
/8”-16 730 (3.24) 63 (28.6)
BHR1250ZN 1
/2”-13 1350 (6.00) 98 (44.4)
BHR1262ZN 5
/8”-11 1500 (6.67) 148 (67.1)
Note: Based on use with 12 ga. channel.
(BHR1225, BHR1238, and BHR1250 use combo nut washers instead of square washers and channel nuts) Refere
fitting and standard finish specifications.

58 Strut Systems
8 cm), 144” (365.7 cm) lengths

04

d value
04
with rod coupling, locking hex nuts, square washer, and channel nut.

ashers instead of square washers and channel nuts) Reference page 44 for general

58 Strut Systems
 KwikW
For Use With Wire Box
Part No. Rope Diameters Qty.

BKC100 1
/16” & 3/32” 100
BKC200 1
/8” & /16”
3
50
KwikWire Clamp S
Working Loads* e
7x7 e
7 x 19
* Working loads tshown are
for hanging vertically.
a
For suspending bat 15°, 30°,
45° or 60° l
angles from vertical,
e use
the following percentage
b
of the working loads from
the chart: e
l
o
w

f
o
r

K
w
i
k
W
i
r
e
™

C
l
a
m
p

W
o
r
Clamp Part Wire Lbs. Safety
No. Rope Factor 5
Dia.
BKC100 /16”
1
0-75
BKC100 /32”
3
25-150
BKC200 1
/8” 25-250
BKC200 /16”
3
50-640

Part No. Rope Dia. Working Load Spool

in. mm Lbs. kg

BKW063 (1) 1
/16” (1.6) 96 (43.5) 500 ft.
BKW094 (1) 3
/32” (2.3) 184 (83.4) 500 ft.
BKW125 (1) 1
/8” (3.2) 340 (154.2) 500 ft.
BKW188 (2) 3
/16” (4.8) 840 (381.0) 250 ft.
Channel Nuts & Hardware

Instructions for installing the wire rope in the clamp - No tools are required.
4
5

Pass the wire rope through the Loop wire rope Pass wire rope back
KwikWire Clamp through/around through KwikWire
support Clamp

Strut Systems 59

KwikWire™ Hardware
 KwikWire™ Clamps

* Working loads shown are

for hanging vertically.
For suspending at 15°, 30°,
45° or 60° 15° = 96%
angles from vertical, use 30° = 86%
the following percentage 45° = 70%
of the working loads from 60° = 50%
the chart:
e in the clamp - No tools are required.
 Push wire rope through To adjust, remove tension and pull
clamp leaving 2” to 3” wire rope slightly to disengage
tail, then apply tension on teeth, slide adjustment pin in
wire rope direction shown by arrow to
release wire rope.
 KwikPak™ Wire Rope & Clamps KwikPak
For Use With Wire Rope Box
Part No. Diameters Qty.

BKP10063 BKC100 (100 pcs.) 1

/16ӯ Wire Rope (500 ft.)
1

BKP10094 BKC100 (100 pcs.) 1

/32ӯ Wire Rope (500 ft.)
3

BKP20125 BKC200 (50 pcs.) 1

1
/8ӯ Wire Rope (500 ft.)
BKP20188 BKC200 (50 pcs.) 1
/16ӯ Wire Rope (250 ft.)
3

KwikPak makes handling KwikWire a breeze!

• KwikPaks include KwikWire clamps and a spool of wire rope.
• KwikPaks are shipped in a specially designed dispenser box to ease field cutting of wire.
Channel Nuts & Hardware

KwikWire™ Cable Cutter

Box Qty.
Part No.

BKCC 1

• Wire rope cutter for cutting all wire rope s

** Danger: Never use cutters on energized circuits, wire, or ca

60 Strut Systems

KwikWire System Recommendations:

• Do not exceed the safe working load of the products
• KwikWire Clamp load ratings are guaranteed only when used in combination with our supplied wire rope
• Do not use for overhead lifting or hoisting
• Do not use if cable or components are visibly distorted or worn. Remove damaged cable end prior to inserting in
KwikWire Clamp
• Do not paint cable near working area of KwikWire Clamp
• Do not apply lubricant
• Keep product clean and free of dirt
• Do not use clamp on coated wire rope
• Do not use in chlorinated or caustic atmospheres
• For use in dry locations
• BKCC tool is recommended for cutting wire rope to prevent fraying
KwikWire System Recommendations:
• Do not exceed the safe working load of the products
• KwikWire Clamp load ratings are guaranteed only when used in combination with our supplied wire rope
• Do not use for overhead lifting or hoisting
• Do not use if cable or components are visibly distorted or worn. Remove damaged cable end prior to inserting in
KwikWire Clamp
• Do not paint cable near working area of KwikWire Clamp
• Do not apply lubricant
• Keep product clean and free of dirt
• Do not use clamp on coated wire rope
• Do not use in chlorinated or caustic atmospheres
• For use in dry locations
• BKCC tool is recommended for cutting wire rope to prevent fraying

KwikWire™ Hardware
 KwikPak™ Wire Rope & Clamps KwikPak

wikWire a breeze!
clamps and a spool of wire rope.
pecially designed dispenser box to ease field cutting of wire.

KwikWire™ Cable Cutter

• Wire rope cutter for cutting all wire rope sizes

** Danger: Never use cutters on energized circuits, wire, or cable.

60 Strut Systems

endations:
oad of the products
guaranteed only when used in combination with our supplied wire rope
hoisting
s are visibly distorted or worn. Remove damaged cable end prior to inserting in

rea of KwikWire Clamp

rt
rope
ic atmospheres

utting wire rope to prevent fraying

endations:
oad of the products
guaranteed only when used in combination with our supplied wire rope
hoisting
s are visibly distorted or worn. Remove damaged cable end prior to inserting in

rea of KwikWire Clamp

rt
rope
ic atmospheres

utting wire rope to prevent fraying

KwikWire™ Hardware
 • KwikWire hanger combines the versatility KwikWir
of a bolt with an adjustable wire rope
solution. e™
• Can be quickly installed in existing Hanger
anchors or metal brackets with a nut.
• ARS, ARC, and ARW anchors are ideal for
use with KwikWire Hangers.
• Ideal for supporting light fixtures, wire
basket cable tray, HVAC ducts, and
sign/banner supports.
• Allows for tool-less adjustment of wire
rope.

Part No. Thread Wire Rope Dia. Loading* SF5

Size in. mm Lbs. kg

BKF100-4 /4”-20
1 1
/16” (1.6) 45 (20.4)
3
/32” (2.3) 90 (40.8)
BKF100-6 /8”-16
3 1
/16” (1.6) 45 (20.4)
3
/32” (2.3) 90 (40.8)

KwikWire Hanger installation

1

2
3

Screw KwikWire Hanger into installed hanger Push cable wire up through the Continue pushing thro
support (ARS anchor pictured) bottom of KwikWire Hanger extending ou
KwikWi
Channel Nuts & Hardware

6
 To adjust up - To adjust down - push up on When hanging the cable
pull or push more cable wire through KwikWire bottom of KwikWire Hanger and excess cable
Hanger allow cable wire to feed down

Strut Systems 61

KwikWire™ Hardware
KwikWire Accessory Features
• Reduces on the job installation time
• Can be installed quickly without drilling into existing structure
• Increases versatility in the field
• KwikWire accessory system reduces inventory and shipping costs
• No more sawing, filing, or fixing nuts
• Designed for use with cable tray, lighting, and HVAC
• Eliminates the need for all threaded rod
• Cost effective solution for jack chain
• “Y” style accessories require 50% less drilling
Continue pushing through until 1/4” minimum is
extending out the side of the
KwikWire Hanger
When hanging the cable wire is complete, cut off any
excess cable wire if desired
 KwikWire Accessory Numbering System
Product Assembly Leg Termination Leg Length Wire Rope Straigh
Line Configuration Diameter t
Length
BK = Blank = A = Angle Blank = See 063 = 1/16” Blank
=
KwikWire Single Leg
Bracket w/Pin Straight Length 094 = 3/32” Loop w/ Assembly
Y = 2 Legs
H = Hook 18 = 18” Leg Plastic Tube Only
3 - 3 Legs
L = Loop 30 = 30” Leg 18 = 18” K=K
T = Toggle 30 = 30” (Assemb
BKC100 Cla
W = Fuse Cut 40 = 40”
B25 = Bolt w/ /4”-20 Thread
1
80 = 80”
B38 = Bolt w/ 3/8”-16 Thread 120 = 120”
BM6 = Bolt w/ M6 Thread 180 = 180”
BM8 = Bolt w/ M8 Thread 240 = 240”
BM10 = Bolt w/ M10 360 = 360”
Thread
Channel Nuts & Hardware
Examples
BKYT18-094-120K

BK Y T 18 - 094 - 120 K
B-Line KwikWire Accessory
2 legs - toggle leg termination - 18” legs - 3/32” diameter wire - 120” straight length - kit
BKL-063-120K
BK L 063
- -120 K
B-Line KwikWire Accessory
single leg - looped leg termination - 1/16” diameter wire - 120” straight length - kit wi
Custom assemblies are available as shown by the red dot on pages 63 - 70.
Lead time on custom assemblies is 2 to 3 weeks depending on quantities.
62 Strut Systems

KwikWire™ Hardware
System
Assembly
or Kit
Blank =
p w/ Assembly
Only
18 = 18” K = Kit
30 = 30” (Assembly &
BKC100 Clamp)
40 = 40”
80 = 80”
120 = 120”
180 = 180”
240 = 240”
360 = 360”
0” straight length - kit with clamp

straight length - kit with clamp

3 - 70.
es.
Systems

re™ Hardware
 KwikWire™ Loop Termination
Wire Rope Dia. Length
Part No. in. mm in. mm

BKL-063-40 1
/16” (1.6) 40” (1016)
BKL-063-80 1
/16” (1.6) 80” (2032)
BKL-063-120 1
/16” (1.6) 120” (3048)
BKL-063-180 1
/16” (1.6) 180” (4572)
BKL-063-240 /16”
1 (1.6) 240” (6096)
BKL-063-360 /16”
1 (1.6) 360” (9144)
BKL-094-40 /32”
3 (2.3) 40” (1016)
BKL-094-80 3
/32” (2.3) 80” (2032)
BKL-094-120 3
/32” (2.3) 120” (3048)
BKL-094-180 3
/32” (2.3) 180” (4572)
BKL-094-240 3
/32” (2.3) 240” (6096)
BKL-094-360 3
/32” (2.3) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

KwikWire™ Loop Termination Kits

Wire Rope Dia. Length
Part No. in. mm in. mm

BKL-063-40K 1
/16” (1.6) 40” (1016)
BKL-063-80K 1
/16” (1.6) 80” (2032)
BKL-063-120K 1
/16” (1.6) 120” (3048)
BKL-063-180K 1
/16” (1.6) 180” (4572)
BKL-063-240K /16”
1 (1.6) 240” (6096)
BKL-063-360K /16”
1 (1.6) 360” (9144)
BKL-094-40K /32”
3 (2.3) 40” (1016)
BKL-094-80K 3
/32” (2.3) 80” (2032)
BKL-094-120K 3
/32” (2.3) 120” (3048)
BKL-094-180K 3
/32” (2.3) 180” (4572)
BKL-094-240K 3
/32” (2.3) 240” (6096)
BKL-094-360K 3
/32” (2.3) 360” (9144)
Channel Nuts & Hardware

Box Quantity - 20
5 bags containing 4 pieces per bag
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working days
Strut Systems 63
KwikWire™ Hardware
 KwikWire™ Loop Termination

Box Quantity - 20
5 bags containing 4 pieces per bag

KwikWire™ Loop Termination Kits

 Box Quantity - 20
5 bags containing 4 pieces per bag
op termination only or as a ready-to-use kit with a BKC100 clamp.
120”, 180”, 240”, and 360”.
ing days = Non-stock item, lead time 10 - 15 working days
63
 KwikWire™ Single Style Hook Termination

Wire Rope Dia. Length

Part No. in. mm in. mm

BKH-094-40 3
/32” (2.3) 40” (1016)
BKH-094-80 3
/32” (2.3) 80” (2032)
BKH-094-120 3
/32” (2.3) 120” (3048)
BKH-094-180 3
/32” (2.3) 180” (4572)
BKH-094-240 3
/32” (2.3) 240” (6096)
BKH-094-360 3
/32” (2.3) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

KwikWire™ Single Style Hook Termination Kits

Wire Rope Dia. Length

Part No. in. mm in. mm

BKH-094-40K 3
/32” (2.3) 40” (1016)
BKH-094-80K 3
/32” (2.3) 80” (2032)
BKH-094-120K 3
/32” (2.3) 120” (3048)
BKH-094-180K 3
/32” (2.3) 180” (4572)
BKH-094-240K 3
/32” (2.3) 240” (6096)
BKH-094-360K 3
/32” (2.3) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag
Channel Nuts & Hardware

KwikWire™ ‘Y’ Style Hook Termination With Loop

 Wire Rope Dia. Length
Part No. in. mm in. mm

BKYH18-094 /32”
3 (2.3) 18” (457)
BKYH30-094 /32”
3 (2.3) 30” (762)

Box Quantity - 10
5 bags containing 2 pieces per bag
• Hook designed to accept up to 3/8” diameter wire.
• Available as a wire rope with hook termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple (3) leg styles

= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 workin
64 Strut Systems

KwikWire™ Hardware
k Termination

k Termination Kits

rmination With Loop

diameter wire.
ermination only or as a ready-to-use kit with a BKC100 clamp.
”, 180”, 240”, and 360”.
riple (3) leg styles
Triple (3) leg style

2 - 3 working days = Non-stock item, lead time 10 - 15 working days

64 Strut Systems

KwikWire™ Hardware
 KwikWire™ ‘Y’ Style Hook Termination
Leg Length Wire Rope Dia. Length
Part No. in. mm in. mm in. mm

BKYH18-094-40 18” (457) 3

/32” (2.3) 40” (1016)
BKYH18-094-80 18” (457) 3
/32” (2.3) 80” (2032)
BKYH18-094-120 18” (457) 3
/32” (2.3) 120” (3048)
BKYH18-094-180 18” (457) 3
/32” (2.3) 180” (4572)
BKYH18-094-240 18” (457) /32”
3 (2.3) 240” (6096)
BKYH18-094-360 18” (457) /32”
3 (2.3) 360” (9144)
BKYH30-094-40 30” (762) /32”
3 (2.3) 40” (1016)
BKYH30-094-80 30” (762) 3
/32” (2.3) 80” (2032)
BKYH30-094-120 30” (762) 3
/32” (2.3) 120” (3048)
BKYH30-094-180 30” (762) 3
/32” (2.3) 180” (4572)
BKYH30-094-240 30” (762) 3
/32” (2.3) 240” (6096)
BKYH30-094-360 30” (762) 3
/32” (2.3) 360” (9144)

Box Quantity - 10
5 bags containing 2 pieces pe

KwikWire™ ‘Y’ Style Hook Termination Kits

Leg Length Wire Rope Dia. Length
Part No. in. mm in. mm in. mm

BKYH18-094-40K 18” (457) 3

/32” (2.3) 40” (1016)
BKYH18-094-80K 18” (457) 3
/32” (2.3) 80” (2032)
BKYH18-094-120K 18” (457) 3
/32” (2.3) 120” (3048)
BKYH18-094-180K 18” (457) 3
/32” (2.3) 180” (4572)
BKYH18-094-240K 18” (457) 3
/32” (2.3) 240” (6096)
BKYH18-094-360K 18” (457) 3
/32” (2.3) 360” (9144)
BKYH30-094-40K 30” (762) /32”
3 (2.3) 40” (1016)
BKYH30-094-80K 30” (762) 3
/32” (2.3) 80” (2032)
BKYH30-094-120K 30” (762) 3
/32” (2.3) 120” (3048)
BKYH30-094-180K 30” (762) 3
/32” (2.3) 180” (4572)
BKYH30-094-240K 30” (762) 3
/32” (2.3) 240” (6096)
BKYH30-094-360K 30” (762) 3
/32” (2.3) 360” (9144)
Channel Nuts & Hardware

Box Quantity - 10
5 bags containing 2 pieces pe
• Hook designed to accept up to 3/8” diameter wire.
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clamp
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.

= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working
Strut Systems 65
KwikWire™ Hardware
kWire™ ‘Y’ Style Hook Termination

Box Quantity - 10
5 bags containing 2 pieces per bag

e™ ‘Y’ Style Hook Termination Kits

 Box Quantity - 10
5 bags containing 2 pieces per bag
.
ly or as a ready-to-use kit with a BKC100 clamp.
”, and 360”.

= Non-stock item, lead time 10 - 15 working days

 KwikWire™ Single Style Toggle Termination

Wire Rope Dia. Length

Part No. in. mm in. mm

BKT-063-40 1
/16” (1.6) 40” (1016)
BKT-063-80 1
/16” (1.6) 80” (2032)
BKT-063-120 1
/16” (1.6) 120” (3048)
BKT-063-180 1
/16” (1.6) 180” (4572)
BKT-063-240 1
/16” (1.6) 240” (6096)
BKT-063-360 1
/16” (1.6) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

KwikWire™ Single Style Toggle Termination Kits

Wire Rope Dia. Length

Part No. in. mm in. mm

BKT-063-40K 1
/16” (1.6) 40” (1016)
BKT-063-80K 1
/16” (1.6) 80” (2032)
BKT-063-120K 1
/16” (1.6) 120” (3048)
BKT-063-180K 1
/16” (1.6) 180” (4572)
BKT-063-240K 1
/16” (1.6) 240” (6096)
BKT-063-360K 1
/16” (1.6) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag
Channel Nuts & Hardware

KwikWire™ ‘Y’ Style Toggle Termination With Loop

 Wire Rope Dia. Length
Part No. in. mm in. mm

BKYT12-063 /16”
1 (1.6) 12” (305)
BKYT18-063 /16”
1 (1.6) 18” (457)
BKYT30-063 /16”
1 (1.6) 30” (762)

Box Quantity - 10
5 bags containing 2 pieces per bag
• Available as a wire rope with toggle termination only or as a ready-to-use kit with a BKC100
clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple (3) leg styles
• All triple (3) leg styles are non-stock, consult B-Line for lead times

= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 workin
66 Strut Systems
KwikWire™ Hardware
gle Termination

gle Termination Kits

Termination With Loop

termination only or as a ready-to-use kit with a BKC100

”, 180”, 240”, and 360”.

riple (3) leg styles
, consult B-Line for lead times

Triple (3) leg style

2 - 3 working days = Non-stock item, lead time 10 - 15 working days
66 Strut Systems
KwikWire™ Hardware
 KwikWire™ ‘Y’ Style Toggle Termination
Leg Length Wire Rope Dia. Length
Part No. in. mm in. mm in. mm

BKYT12-063-40 12” (305) 1

/16” (1.6) 40” (1016)
BKYT12-063-80 12” (305) 1
/16” (1.6) 80” (2032)
BKYT12-063-120 12” (305) 1
/16” (1.6) 120” (3048)
BKYT12-063-180 12” (305) 1
/16” (1.6) 180” (4572)
BKYT12-063-240 12” (305) 1
/16” (1.6) 240” (6096)
BKYT12-063-360 12” (305) 1
/16” (1.6) 360” (9144)
BKYT18-063-40 18” (457) 1
/16” (1.6) 40” (1016)
BKYT18-063-80 18” (457) 1
/16” (1.6) 80” (2032)
BKYT18-063-120 18” (457) 1
/16” (1.6) 120” (3048)
BKYT18-063-180 18” (457) 1
/16” (1.6) 180” (4572)
BKYT18-063-240 18” (457) 1
/16” (1.6) 240” (6096)
BKYT18-063-360 18” (457) 1
/16” (1.6) 360” (9144)
BKYT30-063-40 30” (762) 1
/16” (1.6) 40” (1016)
BKYT30-063-80 30” (762) 1
/16” (1.6) 80” (2032)
BKYT30-063-120 30” (762) 1
/16” (1.6) 120” (3048)
BKYT30-063-180 30” (762) 1
/16” (1.6) 180” (4572)
BKYT30-063-240 30” (762) 1
/16” (1.6) 240” (6096)
BKYT30-063-360 30” (762) 1
/16” (1.6) 360” (9144)

Box Quantity - 10
5 bags containing 2 pieces pe

KwikWire™ ‘Y’ Style Toggle Termination Kits

Leg Length Wire Rope Dia. Length
Part No. in. mm in. mm in. mm

BKYT12-063-40K 12” (305) 1

/16” (1.6) 40” (1016)
BKYT12-063-80K 12” (305) 1
/16” (1.6) 80” (2032)
BKYT12-063-120K 12” (305) 1
/16” (1.6) 120” (3048)
BKYT12-063-180K 12” (305) 1
/16” (1.6) 180” (4572)
BKYT12-063-240K 12” (305) 1
/16” (1.6) 240” (6096)
BKYT12-063-360K 12” (305) 1
/16” (1.6) 360” (9144)
BKYT18-063-40K 18” (457) 1
/16” (1.6) 40” (1016)
BKYT18-063-80K 18” (457) 1
/16” (1.6) 80” (2032)
BKYT18-063-120K 18” (457) 1
/16” (1.6) 120” (3048)
BKYT18-063-180K 18” (457) 1
/16” (1.6) 180” (4572)
BKYT18-063-240K 18” (457) 1
/16” (1.6) 240” (6096)
BKYT18-063-360K 18” (457) 1
/16” (1.6) 360” (9144)
BKYT30-063-40K 30” (762) 1
/16” (1.6) 40” (1016)
BKYT30-063-80K 30” (762) 1
/16” (1.6) 80” (2032)
BKYT30-063-120K 30” (762) 1
/16” (1.6) 120” (3048)
BKYT30-063-180K 30” (762) 1
/16” (1.6) 180” (4572)
 BKYT30-063-240K 30” (762) 1
/16” (1.6) 240” (6096)
BKYT30-063-360K 30” (762) 1
/16” (1.6) 360” (9144)
Channel Nuts & Hardware

Box Quantity - 10
5 bags containing 2 pieces pe
• Available as a wire rope with loop termination only or as a ready-to-use kit with a BKC100 clam
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 working
Strut Systems 67

KwikWire™ Hardware
Wire™ ‘Y’ Style Toggle Termination

Box Quantity - 10
5 bags containing 2 pieces per bag

‘Y’ Style Toggle Termination Kits

 Box Quantity - 10
5 bags containing 2 pieces per bag
nly or as a ready-to-use kit with a BKC100 clamp.
0”, and 360”.
= Non-stock item, lead time 10 - 15 working days
 KwikWire™ Bolt Termination
Thread Wire Rope Dia. Length
Part No. Size in. mm in. mm

BKB25-063-40 1
/4”-20 1
/16” (1.6) 40” (1016)
BKB25-063-80 1
/4”-20 1
/16” (1.6) 80” (2032)
BKB25-063-120 1
/4”-20 1
/16” (1.6) 120” (3048)
BKB25-063-180 1
/4”-20 1
/16” (1.6) 180” (4572)
BKB25-063-240 1
/4”-20 1
/16” (1.6) 240” (6096)
BKB25-063-360 1
/4”-20 1
/16” (1.6) 360” (9144)
BKB38-094-40 3
/8”-16 3
/32” (2.3) 40” (1016)
BKB38-094-80 3
/8”-16 3
/32” (2.3) 80” (2032)
BKB38-094-120 3
/8”-16 3
/32” (2.3) 120” (3048)
BKB38-094-180 3
/8”-16 3
/32” (2.3) 180” (4572)
BKB38-094-240 3
/8”-16 3
/32” (2.3) 240” (6096)
BKB38-094-360 3
/8”-16 3
/32” (2.3) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag
Channel Nuts & Hardware

• Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
• Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clamp.
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple leg (3) styles
• All (Y) and triple (3) styles are non-stock, consult B-Line for lead times

Double (Y) leg style Triple (3) leg style

= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 workin
68 Strut Systems
KwikWire™ Hardware
 hors.
r as a ready-to-use kit with a BKC100 clamp.
nd 360”.
es
ine for lead times

3) leg style
= Non-stock item, lead time 10 - 15 working days
Strut Systems
KwikWire™ Hardware
 KwikWire™ Bolt Termination Kits
Thread Wire Rope Dia. Length
Part No. Size in. mm in. mm

BKB25-063-40K 1
/4”-20 1
/16” (1.6) 40” (1016)
BKB25-063-80K 1
/4”-20 1
/16” (1.6) 80” (2032)
BKB25-063-120K 1
/4”-20 1
/16” (1.6) 120” (3048)
BKB25-063-180K 1
/4”-20 1
/16” (1.6) 180” (4572)
BKB25-063-240K /4”-20
1 1
/16” (1.6) 240” (6096)
BKB25-063-360K /4”-20
1 1
/16” (1.6) 360” (9144)
BKB38-094-40K /8”-16
3 3
/32” (2.3) 40” (1016)
BKB38-094-80K 3
/8”-16 3
/32” (2.3) 80” (2032)
BKB38-094-120K 3
/8”-16 3
/32” (2.3) 120” (3048)
BKB38-094-180K 3
/8”-16 3
/32” (2.3) 180” (4572)
BKB38-094-240K 3
/8”-16 3
/32” (2.3) 240” (6096)
BKB38-094-360K 3
/8”-16 3
/32” (2.3) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces pe
Channel Nuts & Hardware

• Ideal for use with ARS, ARC, ADI, ACPW, or ACPD anchors.
• Available as a wire rope with bolt termination only or as a ready-to-use kit with a BKC100 clam
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
• Available in single, double (Y), and triple (3) styles
• All double (Y) and triple (3) styles are non-stock, consult B-Line for lead times

Double (Y) leg style Triple (3) leg style

= Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 workin
Strut Systems 69
KwikWire™ Hardware
 KwikWire™ Bolt Termination Kits

Box Quantity - 20
5 bags containing 4 pieces per bag

D anchors.
nly or as a ready-to-use kit with a BKC100 clamp.
0”, and 360”.
es
consult B-Line for lead times

ple (3) leg style

= Non-stock item, lead time 10 - 15 working days
 KwikWire™ Angle Bracket Termination

Wire Rope Dia. Length

Part No. in. mm in. mm

BKA-063-40 1
/16” (1.6) 40” (1016)
BKA-063-80 1
/16” (1.6) 80” (2032)
BKA-063-120 1
/16” (1.6) 120” (3048)
BKA-063-180 1
/16” (1.6) 180” (4572)
BKA-063-240 1
/16” (1.6) 240” (6096)
BKA-063-360 1
/16” (1.6) 360” (9144)

Box Quantity - 20
5 bags containing 4 pieces per bag

KwikWire™ Angle Bracket Termination Kits

Wire Rope Dia. Length

Part No. in. mm in. mm

BKA-063-40K 1
/16” (1.6) 40” (1016)
BKA-063-80K 1
/16” (1.6) 80” (2032)
BKA-063-120K 1
/16” (1.6) 120” (3048)
BKA-063-180K 1
/16” (1.6) 180” (4572)
BKA-063-240K /16”
1 (1.6) 240” (6096)
BKA-063-360K /16”
1 (1.6) 360” (9144)
Channel Nuts & Hardware

Box Quantity - 20
5 bags containing 4 pieces per bag
• Available as a wire rope with angle bracket termination only or as a ready-to-use kit with a BKC100
• Available in lengths of 40”, 80”, 120”, 180”, 240”, and 360”.
 = Stock item, lead time 2 - 3 working days = Non-stock item, lead time 10 - 15 workin
70 Strut Systems

Hard
Channel Nuts & Hardware

Strut Systems 71
rmination

ermination Kits

gle bracket termination only or as a ready-to-use kit with a BKC100 clamp.

120”, 180”, 240”, and 360”.
2 - 3 working days = Non-stock item, lead time 10 - 15 working days
70 Strut Systems

Hardware Notes

71
 This section offers a full selection of fittings and accessories to complete our strut system.
Fittings are made from hot rolled, pickled and oiled plate or strip steel in accordance with ASTM A101
unless noted.
Dimensions
The following dimensions apply to all fittings except as noted:

H
o
l
e
Hole Size – 9/16” (14.3 mm)
diameter S
Thickness – 7/32” (5.5 mm) p
a
c
i
n
g
Materials & Finishes (Unless otherwise noted)
Finish
Code Finish Specification

PLN Plain ASTM A1018

33,000 PSI min. yield
ZN Electro-Plated Zinc ASTM B633 SC3 Type III
or ASTM A653
GRN DURA-GREEN™
HDG Hot-Dipped Galvanized ASTM A123
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240
AL Aluminum ASTM B209
Note: A minimum order may apply on special material and finishes.
Load Data
The load data published includes safety factor of 2.5 when used with 12 ga. (2.6) channel (safety facto
the design load).
Use 1/2”-13 x 7/8” hex head cap screws and 1/2”-13 (N225 or TN225) channel nuts for the rated results
Recommended Bolt Torque

Bolt Size 1
/4”-20 5
/16”-18 3
/8”-16 1
/2”-13
Foot/Lbs. 6 11 19 50
Nm 8 15 26 68
Strut Fittings
See chart on page 112 for setscrew torque.
Hardware
Nuts and bolts are not included with the fittings and must be ordered separately, unless noted.
Pre-Assembled Fittings
Some fittings are available with hex head cap screws and channel nuts pre-assembled.

These fittings and finishes will be flagged using the following symbol. PA
Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.

72 Strut Systems
mplete our strut system.
eel in accordance with ASTM A1018 33,000 PSI min. yield,

th 12 ga. (2.6) channel (safety factor = ratio of ultimate load to

) channel nuts for the rated results.

ed separately, unless noted.

nuts pre-assembled.

ZN GRN

Strut Systems
B200-B202-2 SQUARE WASHER
• Standard finishes: ZN, GRN, HDG, SS4, SS6, AL
15/8”
(41.3)
Hole Size A
B200D-B202-2D NO TWIST SQUARE WASHER
• Standard finishes: ZN, GRN, HDG, SS4, SS6, AL
15/8”
(41.3)
Hole Size A

B340 B528
TWO HOLE SPLICE PLATE TWO HOLE SPLICE PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 34 Lbs. (15.4 kg) • Wt./C 50 Lbs. (22.7 kg)
15/8” 15/ ” 21/2”
(41.3)
31/4”
16
(63.5)
(82.5) (33.3)
45/8”
(117.5)
B557 B341
THREE HOLE SPLICE PLATE FOUR HOLE SPLICE PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG
• Wt./C 50 Lbs. (22.7 kg) • Wt./C 76 Lbs. (34.5 kg)
47/8” PA ZN GRN
(123.8) 71/4”
15/8” (184.1)
15/8”
(41.3)
(41.3)

Part Wt./C
No. A (A) Bolt Size Lbs. kg

B200 3
/8” (9.5) /16” (7.9)
5
18 (8.1)
B201 7
/16” (11.1) 3
/8” (9.5) 18 (8.1)
B202 9
/16” (14.2) 1
/2” (12.7) 17 (7.7)
B202-1 11
/16” (17.4) 5
/8” (15.9) 16 (7.2)
B202-2 13
/16” (20.6) 3
/4” (19.0) 15 (6.8)
Part Wt./C
No. A (A) Bolt Size Lbs. kg

B200D 3
/8” (9.5) /16”
5 (7.9) 18 (8.1)
B201D 7
/16” (11.1) 3
/8” (9.5) 18 (8.1)
B202D 9
/16” (14.2) 1
/2” (12.7) 17 (7.7)
B202-1D 11
/16” (17.4) 5
/8” (15.9) 16 (7.2)
B202-2D 13
/16” (20.6) 3
/4” (19.0) 15 (6.8)
Strut Fittings
 Reference page 72 for general fitting and standard finish specifications.
73

Strut Systems
 B129
TWO HOLE SPLICE PLATE
• Standard finishes: ZN, GRN
• Wt./C 37 Lbs. (16.8 kg)
PA ZN GRN
31/2”
(88.9)

B141
THREE HOLE SPLICE PLATE
• Standard finishes: ZN, GRN
• Wt./C 55 Lbs. (24.9 kg)
PA ZN
GRN
5 3/ 8”
(136.5)
 B342
FIVE HOLE SPLICE PLATE
• Standard finishes: ZN, GRN
• Wt./C 96 Lbs. (43.5 kg)
91/8”
(231.8)
PA
fitting and standard finish specifications. Preassembled fitting.
73
 B138 B139
TWO HOLE SWIVEL PLATE THREE HOLE SWIVEL PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 48 Lbs. (21.8 kg) • Wt./C 69 Lbs. (31.3 kg)
45/8” 61/2”
(117.5) (165.1)
3” 3”
(76.2) 17/8” (76.2)
(47.6)

B140 B143
THREE HOLE CORNER PLATE FOUR HOLE CORNER PLATE
• Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 56 Lbs. (25.4 kg) • Wt./C 75 Lbs. (34.0 kg)
PA ZN GRN PA ZN GRN
31/2” 31/2”
(88.9) (88.9)
31/2” 53/8”
(88.9) (136.5)

B132 B135
FIVE HOLE CROSS PLATE THREE HOLE CORNER GUSSET PLATE
• Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg) • Wt./C 70 Lbs. (31.7 kg)
PA ZN GRN 31/2”
5 / 8”
3 (88.9)
(136.5) 31/2 (88.9)
53/8”
Strut Fittings

PA Preassembled fitting. Reference page 72 for general fitting and standard finish specifications.
74
 B504
FOUR HOLE SPLICE PLATE
• Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg)
15/8”
31/2”
(88.9) (41.3) 31/
(82.5

4
”
)

B133
FOUR HOLE TEE PLATE
• Standard finishes: ZN, GRN, HDG, SS4,
AL
• Wt./C 75 Lbs. (34.0 kg)
31/2”
PA ZN
GRN
(88.9)
53/8”
(136.5)

B142
FOUR HOLE CORNER GUSSET PLATE
• Standard finishes: ZN, GRN, HDG
• Wt./C 102 Lbs. (46.2 kg)
PA ZN GRN
31/2”
(88.9)
53/8”
(136.5)
al fitting and standard finish specifications.
74

Strut Systems
B137 B556
FOUR HOLE CORNER GUSSET PLATE FIVE HOLE CORNER GUSSET PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 273 Lbs. (123.8 kg) • Wt./C 145 Lbs. (65.8 kg)
75/8” 25/16” 53/8”
(193.7) (58.7) (136.5)
53/8”
513/16” (136.5)
1” (147.6)
(25.4) 5
7 /8”
(193.7)
31/2”
(88.9)
1”
(25.4)

B432 B136
FOUR HOLE TEE GUSSET PLATE FOUR HOLE TEE GUSSET PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg) • Wt./C 100 Lbs. (45.3 kg)
31/2” 31/2”
(88.9) (88.9)
53/8” 53/8”
(136.5) (136.5)
 B339 B568
SIX HOLE TEE GUSSET PLATE SIX HOLE CROSS GUSSET PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 149 Lbs. (67.6 kg) • Wt./C 166 Lbs. (75.3 kg)
91/8” 91/8”
(231.8) (231.8)
31/2” 31/2”
(88.9) (88.9)
Strut Fittings

Reference page 75 for general fitting and standard finish specific

Strut Systems 75
B337
THREE HOLE TEE GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 70 Lbs. (31.7 kg)
31/2”
(88.9)
31/2”
(88.9)

B532
FIVE HOLE TEE GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 143 Lbs. (64.8 kg)
53/8”
(136.5)
53/8”
(136.5)
 B334
SEVEN HOLE CROSS GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 232 Lbs. (105.2 kg)
91/8”
(231.8)
53/8”
(136.5)

e 75 for general fitting and standard finish specifications.

75
B420-378 B420-578
ONE HOLE CORNER ANGLE ONE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 60 Lbs. (27.2 kg) • Wt./C 85 Lbs. (38.5 kg)
17/8” 17/8”
(47.6) (47.6) 57/8”
37/8” (149.2)
(98.4)

B420-978 B101
ONE HOLE CORNER ANGLE TWO HOLE CORNER ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG, SS4,
• Wt./C 129 Lbs. (58.5 kg) AL
17/8” • Wt./C 37 Lbs. (16.8 kg)
(47.6) PA ZN
15/8”
97/8” GRN
(250.8) (41.3)
25/16”
(58.7)
B231 B359
TWO HOLE “NO-TWIST” CORNER TWO HOLE CORNER ANGLE
ANGLE • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN, HDG • Wt./C 48 Lbs. (21.8 kg)
• Wt./C 41 Lbs. (18.6 kg) 3”
PA ZN GRN (76.2)
2 / 4” 1 17/8”
(57.1) (47.6)
21/4”
(57.1)
Strut Fittings

PA Preassembled fitting. Reference page 72 for general fitting and standard finish specifications.
76
B420-778
ONE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 107 Lbs. (48.5 kg)
17/8”
(47.6)
77/8”
(200.0)

B230
TWO HOLE CORNER ANGLE
• Standard finishes: ZN, GRN, HDG, SS4,
AL
• Wt./C 37 Lbs. (16.8 kg)
PA ZN
17/8”
GRN
(47.6)
21/16”
(52.4)
 B360
TWO HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)
31/2”
(88.9)
17/8”
(47.6)

al fitting and standard finish specifications.

76

Strut Systems
B361 B102
TWO HOLE CORNER ANGLE THREE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 60 Lbs. (27.2 kg) • Wt./C 56 Lbs. (25.4 kg)
4” PA ZN GRN
(101.6) 31/2”
17/8” (88.9)
(47.6) 21/4”
(57.1)

B232 B374
THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN, HDG
• Wt./C 56 Lbs. (25.4 kg) • Wt./C 56 Lbs. (25.4 kg)
PA ZN GRN PA ZN
21/16”
1 / 8”
7 GRN
(52.4)
(47.6) 33/4”
315/16” (95.2)
(100.0)
B104 B115
FOUR HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE
• Standard finishes: ZN, GRN, HDG, SS4, • Standard finishes: ZN, GRN, HDG, SS4,
SS6, AL AL
• Wt./C 78 Lbs. (35.4 kg) • Wt./C 76 Lbs. (34.5 kg)
PA
PA ZN GRN ZN
33/4”
3 / 2” 1 GRN
(88.9) (95.2)
41/8” 315/16”
(104.8) (100.0)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

77

Strut Systems
B103
THREE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 56 Lbs. (25.4 kg)
PA ZN GRN
15/8”
(41.3)
41/8”
(104.8)

B529
THREE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 78 Lbs. (35.4 kg)
3”
15/16” (76.2)
(33.3)
47/8”
(123.8)
15/16” 21/2”
(33.3) (63.5)
 B558
FOUR HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg)
15/8”
(41.3)
21/4”
(57.1)
15/8”
31/4”
(41.3) (82.5)

PA
Preassembled fitting.

ing and standard finish specifications.

77
 B235R B235L
THREE HOLE (RIGHT HAND) OFFSET THREE HOLE (LEFT HAND) OFFSET
BENT ANGLE BENT ANGLE
• 15/8” (41.3) from center to center of the • 15/8” (41.3) from center to center of the
holes that are shown with bolt heads holes that are shown with bolt heads
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg) • Wt./C 53 Lbs. (24.0 kg)
17/8” 31/4”
31/4” 17/8”
(47.6) (82.5)
(82.5) (47.6)
21/16” 21/16”
(52.4) (52.4)

B236L B237
THREE HOLE (LEFT HAND) OFFSET THREE HOLE OFFSET BENT TEE
BENT ANGLE • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 71 Lbs. (32.2 kg)
• Wt./C 65 Lbs. (29.5 kg) 47/8” 2”
31/2” 1 / 8”
7 (123.8) (50.8)

(88.9) (47.6)
21/16”
(52.4)

B238R B238L
FOUR HOLE (RIGHT HAND) OFFSET FOUR HOLE (LEFT HAND) OFFSET
BENT TEE BENT TEE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 76 Lbs. (34.5 kg) • Wt./C 76 Lbs. (34.5 kg)
21/16” 21/16”
(52.4) (52.4)
33/4” 33/4”
(95.2) 31/2” 31/2” (95.2)
(88.9) (88.9)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

78
 B236R
THREE HOLE (RIGHT HAND) OFFSET
BENT ANGLE
• Standard finishes: ZN, GRN
• Wt./C 65 Lbs. (29.5 kg)
17/8” 31/2”
(47.6) (88.9)

21/16”
(52.4)

B357
FOUR HOLE OFFSET BENT TEE
• Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg)
21/16”
(52.4)
53/8”
(136.5)

B239
FIVE HOLE OFFSET BENT TEE
• Standard finishes: ZN, GRN
• Wt./C 96 Lbs. (43.5 kg)
21/16” 53/8”

(52.4) (136.5)
31/2”
(88.9)
rd finish specifications.
Strut Systems
B844 B844W
UNIVERSAL SHELF BRACKET UNIVERSAL SHELF BRACKET- WELDED
• Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN
• Wt./C 132 Lbs. (59.9 kg) • Wt./C 134 Lbs. (60.8 kg)
4” 4”
(101.6) (101.6)
4” Welded Corner
(101.6) 4”
17/8” (101.6)
(47.6) 17/8”
(47.6)

B234R B234L
FOUR HOLE (RIGHT HAND) CORNER FOUR HOLE (LEFT HAND) CORNER
GUSSET GUSSET
• Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg) • Wt./C 100 Lbs. (45.3 kg)
31/2” 31/2”
(88.9) (88.9) 15/8”
15/8” (41.3)
(41.3) 43/16”
43/16” (106.3)
(106.3)
B134L B125
FOUR HOLE (LEFT HAND) CORNER THREE HOLE GUSSETTED SHELF
GUSSET ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg) • Wt./C 67 Lbs. (30.4 kg)
315/16” 31/2”
(100.0) (88.9)
31/2” 15/8”
(88.9) (41.3)
17/8” 25/16”
(47.6) (58.7)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 79
B888W
UNIVERSAL SHELF BRACKET-
WELDED
• Standard finishes: ZN, GRN
• Wt./C 197 Lbs. (89.4 kg)
513/16”
(147.6)
17/8”
(47.6)
53/8”
(136.5)

B134R
FOUR HOLE (RIGHT HAND) CORNER
GUSSET
• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)
315/16”
(100.0)
31/2”
(88.9)
17/8”
(47.6)
 B118
FOUR HOLE GUSSETTED SHELF
ANGLE
• Standard finishes: ZN, GRN, HDG
• Wt./C 102 Lbs. (46.2 kg)
31/2”
(88.9)
15/8”
(41.3)
41/8”
(104.8)

e 72 for general fitting and standard finish specifications.

79
 B485 B533
FOUR HOLE GUSSETTED SHELF FIVE HOLE GUSSETTED SHELF ANGLE
ANGLE • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 141 Lbs. (63.9 kg)
• Wt./C 148 Lbs. (67.1 kg) 15/8”
1 / 8”
7
(41.3) 41/8”
(47.6) (104.8)
53/8” 53/8”
(136.5) (136.5)
315/16”
(100.0)

B127 B503R
FIVE HOLE GUSSETTED THREE WAY SIX HOLE (RIGHT HAND) GUSSETTED
SHELF ANGLE CORNER CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 135 Lbs. (61.2 kg) • Wt./C 229 Lbs. (103.9 kg)
31/2” 33/4”
(88.9) (95.2) 43/16”
31/2” (106.3)
(88.9) 53/8”
43/16” (136.5)
(106.3) 15/8”
(41.3)
B663 B371
SEVEN HOLE GUSSETTED CORNER TWO HOLE ADJUSTABLE CORNER ANGLE
CONNECTION • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 41 Lbs. (18.6 kg)
• Wt./C 289 Lbs. (131.1 kg) 25/8”
5 / 8” 3 (66.7)
(136.5) 9
/16” (14.3)
/8”
43/16” 9
/16” x 11/2” Slot 2”
36.5)
(106.3) (14.3) (38.1) (50.8)

15/8”
(41.3)
Strut Fittings

53
(1
Reference page 72 for general fitting and standard finish specifications.
80
B126
FOUR HOLE GUSSETTED THREE WAY
SHELF ANGLE
• Standard finishes: ZN, GRN
• Wt./C 101 Lbs. (45.8 kg)
31/2”
(88.9)
31/2”
(88.9)
21/4”
(57.1)

B503L
SIX HOLE (LEFT HAND) GUSSETTED
CORNER CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 229 Lbs. (103.9 kg)
33/4 (95.2)
43/16”
(106.3) ”
53/8”
(136.5)
15/8”
(41.3)
 B372
TWO HOLE ADJUSTABLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 38 Lbs. (17.2 kg)
25/8”
(66.7)
9
/16” (14.3)
9
/16” x 11/2” Slot 15/8”

(14.3) (38.1) (41.3)

rd finish specifications.
Strut Systems
 B496 B496-1
TWO HOLE ADJUSTABLE CORNER ANGLE TWO HOLE ADJUSTABLE CORNER
• Standard finishes: ZN, GRN ANGLE
• Wt./C 85 Lbs. (38.5 kg) • Standard finishes: ZN, GRN, HDG
23/8” • Wt./C 58 Lbs. (26.3 kg)
(60.3) 23/8”
67/8” (60.3)
(174.6) 47/8”
9
/16” x 29/16” Slot (14.3) (65.1) (123.8)
17/8” /16” x 29/16”
9
Slot (14.3) (65.1)
(47.6) 17/8”
(47.6)

B104SH B461
THREE HOLE ADJUSTABLE CORNER TWO HOLE ADJUSTABLE CORNER
ANGLE ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 68 Lbs. (30.8 kg) • Wt./C 87 Lbs. (39.4 kg)
31/2” 21/4”
(88.9) 31/2” (57.1)

13
/32” (10.3) (88.9)
9
/16” x 29/16” Slot 1/2”
(14.3) (65.1) 41/8”
(12.7)
31/2”
(104.8) (88.9)
/16” x 29/16”
9
Slot (14.3) (65.1)

B113 B109S
FOUR HOLE ADJUSTABLE CORNER TWO HOLE TAPPED CORNER ANGLE
ANGLE • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 33 Lbs. (14.9 kg)
• Wt./C 256 Lbs. (116.1 kg) 5/16”-18 Tapped
/16” x 11/2” Slot -(2) 33/4” 17/8”
14.3) (38.1) (95.2) (47.6)
6” 15/8”
(152.4) (41.3)
85/8” 17/ ”
(219.1) 8

(47.6)
Strut Fittings

9
(

Reference page 72 for general fitting and standard finish specific

Strut Systems 81
B371-2
THREE HOLE ADJUSTABLE CORNER
ANGLE
• Standard finishes: ZN, GRN
• Wt./C 61 Lbs. (27.6 kg)
15/16”
(33.3)
/16” x 11/2”
9
Slot
(14.3) (38.1) 5
2 /8”
(66.7)
37/8”
(98.4)

B112
FOUR HOLE ADJUSTABLE CORNER
ANGLE
• Standard finishes: ZN, GRN
• Wt./C 180 Lbs. (81.6 kg)
/16” x 11/2”
9
Slot -(2) (14.3) (38.1)
33/4”
4” (95.2)
(101.6)
65/8”
(168.3)

B521
TWO HOLE BUS DUCT ANGLE
• Standard finishes: ZN, GRN
• Wt./C 37 Lbs. (16.8 kg)
1/2”
17/8”
(12.7) (47.6)

2”
(50.8)
e 72 for general fitting and standard finish specifications.
81
B147-B152 B243-B253
TWO HOLE OPEN ANGLE FOUR HOLE OPEN ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
23/8” 311/16”
(60.3) (93.6) A
11/16” 31/2”
31/4” (88.9)
(27.0)

Part A Wt./C A (82.5)

No. Lbs. kg
11/16”
B147 821/2°
(27.0)
B148 75°
B149 671/2° 63 (28.6)

B150 60°
B151 521/2°
B152 371/2°

B162-B165 B322-B332
TWO HOLE OPEN ANGLE TWO HOLE OPEN SHORT ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
11/16” A
(27.0)
Part A Wt./C
35/16” No. Lbs. kg
(84.1)
B322 71/2°
B323 15°
B324 221/2°
B325 30°
B326 371/2°
Part A Wt./C 21/16” B327 45°
No. Lbs. kg 11/16”
(52.4) 35 (15.9)
B328 521/2°
(27.0)
B162 30° 59 (26.7)
B329 60°
B163 221/2° B330 671/2°
B164 15° B331 75°
B165 71/2° B332 821/2°
B154 B522 ING B488
TWO HOLE OPEN ANGLE THREE HOLE 95° , GRN TWO HOLE
• Standard finishes: ZN, GRN, SS4 OPEN ANGLE FITT kg) • Standard fini
• Wt./C 58 Lbs. (26.3 kg) 5° • Wt./C 100 Lb
• Standard finishes: Z
3” • Wt./C 54 Lbs. (24.5
(76.2) 17/8”
11/16” (47.6)
(27.0) 25/16” 35/8”
45°
(58.7) (92.1)
11/16”
(27.0)

Part A Wt./C
No. Lbs. kg

B243 71/2°
B244 15°
B245 221/2°
B246 30°
B247 371/2°
B248 45° 77 (34.9)
B249 521/2°
B250 60°
B251 671/2°
B252 75°
B253 821/2°
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

82
GLE
, GRN

RT ANGLE
GRN

A
13/4”
(44.4) 15/8” (41.3)
 LEG CONNECTION
shes: ZN, GRN s. (45.3 kg)
5°

5°
31/4”
(82.5)

cations.
Strut Systems
B156 - B161 B155
TWO HOLE CLOSED ANGLE TWO HOLE CLOSED ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN, HDG, SS4
/16” (20.6)
13 • Wt./C 63 Lbs. (28.6 kg)
33/16” PA ZN GRN
(80.9) 13
/16” 31/2”
13
/16” (20.6) (20.6)
A (88.9)
21/2” 45°
13/16”
(63.5) 21/2”
(20.6) (63.5)

B363 - B369 B335-2 SERIES

FOUR HOLE CLOSED ANGLE THREE HOLE ADJUSTABLE HINGE
• Standard finishes: ZN, GRN • OSHPD approved for Seismic Zone 4
5” • Standard finishes: ZN, GRN
(127.0) H
Hole Size This Hole Only
411/16”
(119.1)
213/16”
Part A Wt./C (71.4)
No. Lbs. kg

B363 821/2°
B364 75° 43/8”
B365 671/2° (111.1)
B366 60° 95 (43.1) A Part No. & Hole Size H Wt./C
B367 521/2° Size Lbs. kg

B368 45° B335-2-3/8 7

/16” (11.1) 96 (43.2)
B369 371/2° B335-2-1/2 9
/16” (14.3) 94 (42.3)
B335-2-5/8 11
/16” (17.4) 92 (41.4)
B335-2-3/4 13
/16” (20.6) 90 (40.5)

B335 B335V B335-1

FOUR HOLE ADJUSTABLE HINGE TWO HOLE HALF HINGE TWO HOLE ADJUSTABLE HINGE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg) • Wt./C 78 Lbs. (35.4 kg)
411/16” 213/16”
(119.1) Part No. & Hole Size H Wt./C (71.4)
411/16” Size Lbs. kg 213/16”
(119.1) B335V-1/2 9
/16” (14.3) 53 (24.1) (71.4)
B335V-5/8 11
/16” (17.4) 54 (24.5)
B335V-3/4 13
/16” (20.6) 55 (24.9)
H
411/16”
(119.1)
 Part A Wt./C
No. Lbs. kg

B156 82 /2°
1

B157 75°
B158 671/2°
56 (25.4)
B159 60°
B160 521/2°
B161 371/2°
Strut Fittings

PA
Reference page 72 for general fitting and standard finish specifications.
83

Strut Systems
SS4

RIES
TABLE HINGE
Seismic Zone 4
s: ZN, GRN

le Only

B335-1
E ADJUSTABLE HINGE
ard finishes: ZN, GRN
/C 78 Lbs. (35.4 kg)
213/16”
(71.4)
213/16”
(71.4)
pecifications. Preassembled fitting.
 B634 B635
SINGLE CHANNEL ADJUSTABLE BRACE DOUBLE CHANNEL ADJUSTABLE BRACE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 306 Lbs. (138.8 kg) • Wt./C 518 Lbs. (234.9 kg)
13
/16” (20.6) /16”
13
(20.6)
15/8” 15/8”
(41.3) (41.3)
30° 17/8”
MIN. 7
1 /8” (47.6)
(47.6) 33/4”
33/4” (95.2)
(95.2) 53/8”
53/8” (136.5)
(136.5)

B650 SERIES
SEISMIC RETROFIT BRACKET
• OSHPD approved for Seismic Zone 4.
• Available for 3/8”, 1/2”, 5/8”, and 3/4” threaded rods. ATR
• Allows installer to easily brace existing trapeze supports. Bracket
• Includes: Bracket, B129 plate, & key. Hardware sold separately.
• Standard finish: ZN, GRN

Part No. For Rod TL LL Wt./C

& Size Size Lbs. kN Lbs. kN Lbs. kg

B650- /8
3 3
/8” 1100 (4.89) 1100 (4.89) 92 (41.4)
B650-1/2 1
/2” 1500 (6.67) 1500 (6.67) 97 (43.6)
B650-5/8 5
/8” 1500 (6.67) 1500 (6.67) 95 (42.7)
B650-3/4 3
/4” 1500 (6.67) 1500 (6.67) 107 (48.5)
Longitudina l
Load (LL)

B633
ADJUSTABLE SEISMIC HINGE FITTING
• B633-1/2 thru B633-7/8 - OSHPD approved for Seismic Zone 4.
• Use 1/2” Bolt & Channel Nut on two hole side of Connector Fitting (Torque to 50 ft.-
lbs.)
• Allows for swivel in two planes.
33 /4
• Standard finish: ZN
”
(95.2
15 /8 )
”
(41.3
)
 15 /8
”
(41.3
)
Strut Fittings

Part No. Hole Size H Wt./C

& Size A B Lbs. kg

B633-1/2 31/2” (82.5) 15/8” (41.3) 9

/16” (14.3) 92 (41.4)
B633-5/8 31/2” (82.5) 15/8” (41.3) 11
/16” (17.4) 97 (43.6)
B633-3/4 31/2” (82.5) 15/8” (41.3) 13
/16” (20.6) 95 (42.7)
B633-7/8 39/16” (90.5) 2” (50.8) 15
/16” (23.8) 107 (48.5)
B633-1 39/16” (90.5) 2” (50.8) 11/16” (27.0) 120 (54.0)
B633-11/8 39/16” (90.5) 2” (50.8) 1 /16”
3 (30.2) 104 (47.2)
B633-11/4 37/8” (98.4) 21/4” (57.1) 1 /16”
5 (33.3) 114 (51.7)
Reference page 72 for general fitting and standard finish specifications.
84
ACE

B129

Key

ongitudina l Transverse Load (TL)

oad (LL) H

B
A

Strut Systems
 B261 - TWO HOLE 45° KNEE BRACE
• Standard finishes: ZN, GRN
• Design load determined by testing using a B335 hinged corner connection.
• Load ratings are for brace members only. Do not exceed allowable beam or column loads for strut channels.
• Safety Factor of 3

Part No. Design Load Wt./C

Lbs. kN Lbs. kg
A (A) B (B)
B261-8 8” (203.2) 73/8” (187.3) 1500 (6.67) 119 (54.0)
B261-12 12” (304.8) 101/8” (257.2) 1020 (4.54) 165 (74.8)
B261-16 165/8” (422.3) 133/8” (339.7) 530 (2.36) 218 (98.9)
B261-18 18” (457.2) 147/16” (366.7) 450 (2.00) 234 (106.1)
B261-24 24” (609.6) 1811/16” (474.7) 250 (1.11) 303 (137.4)
B261-36 36” (914.4) 273/16” (690.6) 110 (0.49) 441 (200.0)
45°
Part Design Load Wt./C
No. A (A)
Lbs. kN Lbs. kg

B631-18 18” (457.2) 1500 (6.67) 145 (65.8)

B631-24 24” (609.6) 1500 (6.67) 186 (84.4)
B631-30 30” (762.0) 1500 (6.67) 225 (102.0)
B631-36 36” (914.4) 1500 (6.67) 266 (120.6)
B631-42 42” (1066.8) 1230 (5.47) 307 (139.2)
B631-48 48” (1219.2) 940 (4.18) 348 (157.8)
B631-54 54” (1371.6) 740 (3.29) 389 (176.4)
B631-60 60” (1524.0) 600 (2.67) 430 (195.0)
B631-72 72” (1828.8) 420 (1.87) 508 (230.4)
B631-84 84” (2133.6) 310 (1.38) 589 (267.2)
B631-96 96” (2438.4) 240 (1.07) 669 (303.5)

B632 - TWO HOLE STRAIGHT TUBING BRACE

• 1” (25.4) Square steel tubing
• Material: ASTM A513
• Standard finishes: ZN, GRN

Part Wt./C
No. A (A)
Lbs. kg

B632-18 18” (457.2) 133 (60.3)

B632-24 24” (609.6) 174 (78.9)
B632-30 30” (762.0) 215 (97.5)
B632-36 36” (914.4) 256 (116.1)
B632-42 42” (1066.8) 295 (133.8)
B632-48 48” (1219.2) 335 (151.9)
B632-54 54” (1371.6) 380 (172.3)
B632-60 60” (1524.0) 420 (190.5)
B632-72 72” (1828.8) 500 (226.8)
B632-84 84” (2133.6) 585 (265.3)
B632-96 96” (2438.4) 670 (303.9)
Strut Fittings

Reference page 72 for general fitting and standard finish specifica

Strut Systems 85

B631 - TWO HOLE 45° TUBING KNEE BRACE

• 1” (25.4) Square steel tubing
• Material: ASTM A513
• Standard finishes: ZN, GRN
• Design load determined by testing using a B335 hinged corner
connection.
• Load ratings are for brace members only. Do not exceed allowable
beam or column loads for strut channels.
• Safety Factor of 3
 15 /8
nged corner connection. ”
(41.3
xceed allowable beam or column loads for strut channels.
)

Design Load
B
A

15 /8
”
(41.3
)
B
ence page 72 for general fitting and standard finish specifications.
85

Design Load

hinged corner

exceed allowable A

13 /4
”
(44.4
)

13 /4
”
(44.4
)

A
 B169 B168 B167
TWO HOLE SPLICE CLEVIS FOR B52 THREE HOLE SPLICE CLEVIS FOR B52 FOUR HOLE SPLICE CLEVIS FOR B
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 84 Lbs. (38.1 kg) • Wt./C 126 Lbs. (57.1 kg) • Wt./C 178 Lbs. (80.7 kg)
31/2” 53/8” PA GRN
(88.9) (136.5) 71/4”
1
/ 4” 1
/4” (6.3) (184.1)
(6.3) 1
/4” (6.3)

B170 B171 B172

TWO HOLE SPLICE CLEVIS FOR B22 THREE HOLE SPLICE CLEVIS FOR B22 FOUR HOLE SPLICE CLEVIS FOR B2
OR B52A OR B52A OR B52A
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 123 Lbs. (55.8 kg) • Wt./C 195 Lbs. (88.4 kg) • Wt./C 266 Lbs. (120.6 kg)
31/2” 53/8” PA ZN GRN
1/4” (88.9) (136.5) 71/4”
(6.3) 1
/4” (6.3) (184.1)
1
/4” (6.3)

B172-12 B172-22A B4
FOUR HOLE SPLICE CLEVIS FOR B12 FOUR HOLE SPLICE CLEVIS FOR B11 U-WASH
• Standard finishes: ZN, GRN OR B22A • Material: ASTM A1011 HSLAS Gr
• Wt./C 326 Lbs. (147.8 kg) • Standard finishes: ZN, GRN • Standard finishes: ZN, G
71/4” • Wt./C 406 Lbs. (184.1 kg)
(184.1) PA GRN
Hole
1
/4” (6.3) 7 / 4”
1
15
/32”(1
(184.1) 1
1
/4” (6.3) 11 Gauge (3.1)

Part No. & Hole Size H

Size
B450-1/4 5
/16”
B450-3/8 7
/16”
B450-1/2 9
/16”
B450-5/8 11
/16”
B450-3/4 13
/16”
Strut Fittings

PA Preassembled fitting. Reference page 72 for general fitting and standard finish specifications.
86
 B167
OLE SPLICE CLEVIS FOR B52
andard finishes: ZN, GRN
Wt./C 178 Lbs. (80.7 kg)
PA GRN
71/4”
(184.1)
1
/4” (6.3)

LE SPLICE CLEVIS FOR B22

finishes: ZN, GRN

6 Lbs. (120.6 kg)

B450
U-WASHER
erial: ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
H
Hole Size
15
/32” (11.9)
15/8”
11 Gauge (3.1) (41.3)

Hole Size H Wt./C

Lbs. kg
(7.9) 14 (6.3)
(11.1) 14 (6.3)
(14.3) 13 (5.8)
(17.4) 13 (5.8)
(20.6) 13 (5.8)
finish specifications.

Strut Systems
 B527 B116-52
THREE HOLE OFFSET PLATE THREE HOLE U-SUPPORT
CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg) • Wt./C 70 Lbs. (31.7 kg)
/2” (12.7)
1

55/16”
(134.9)

13
/16”
(20.6)

57/16”
(138.1)

B116-32 B116-32A
THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 84 Lbs. (38.1 kg) • Wt./C 116 Lbs. (52.6 kg)

23/4”
13/8” (69.8)
(34.9)

57/16”
(138.1)
57/16”
(138.1)

B107 B107-22A
FIVE HOLE U-SUPPORT THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN, HDG
• Wt./C 85 Lbs. (38.5 kg) • Standard finishes: ZN, GRN
ZN GRN
• Wt./C 126 Lbs. (57.1 kg)
PA
15/8”
(41.3)
57/16”
(138.1)

31/4”
(82.5)
 57/16”
(138.1)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

87

Strut Systems
B116-42
THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)

1”
(25.4)

57/16”
(138.1)

B116-12
THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 108 Lbs. (49.0 kg)

27/16
(61.9)

57/16”
(138.1)

B588
THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 157 Lbs. (71.2 kg)

47/8”
(123.8)
 57/16”
(138.1)

tting and standard finish specifications. Preassembled fitting.

87
B412 B107S
THREE HOLE OFFSET U-SUPPORT FIVE HOLE U-SUPPORT
• Standard finishes: ZN, GRN • Material: 7 Gauge (4.5)
• Wt./C 89 Lbs. (40.3 kg) ASTM A1011 33,000 PSI min. yield
57/16” • Standard finishes: ZN, GRN
(138.1) • Wt./C 51 Lbs. (23.1 kg)
17/8” 33/4”
(47.6) (95.2)
1” 1 /8”
3

(25.4) (34.9)
7
/16” (11.1) Dia.
13/4” 9
/16” (14.3) 4 Holes

Dia.
(44.4)

B578 B594
THREE HOLE LIGHT-WEIGHT U- FIVE HOLE U-SUPPORT
SUPPORT • Standard finishes: ZN, GRN
• Material: 10 Gauge (3.4) • Wt./C 106 Lbs. (48.1 kg)
ASTM A1011 HSLAS Gr. 50 35/16”
• Standard finishes: ZN, GRN 1 / 8”
7 (84.1)

• Wt./C 18 Lbs. (8.1 kg) (47.6)

311/16” 71/16”
3/4” (93.6) (179.4)
(19.0)
13
/32”
15/8”
(10.3)

9
/32” (7.1) (41.3)

Dia. 3 Holes 111/16”

(42.8)
 B425 B581
SIX HOLE U-SUPPORT EIGHT HOLE U-SUPPORT
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 167 Lbs. (75.7 kg) • Wt./C 201 Lbs. (91.2 kg)
31/2” 31/2” 15/8”
(88.9) (88.9) (41.3)

57/16” 71/16”
(138.1) (179.4)

”
)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

88
B596
THREE HOLE SWIVEL CLEVIS
• Material: 7 Gauge (4.5)
• Standard finishes: ZN, GRN
• Wt./C 53 Lbs. (24.0 kg)
/16”
13
(20.6)
21/4”
(57.1)
15/8”
15/8”
(41.3)
(41.3)

B266
SIX HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 105 Lbs. (47.6 kg)
121/32”
(42.1)
15/8 (41.3
71/32”
(178.6)
35/16”
(84.1)
 B519
EIGHT HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 266 Lbs. (102.5 kg)
111/16”
(42.9)
31/2”
31/2”
(88.9)
(88.9)
15/8”
(41.3)
513/32”
(137.3)

”
)

rd finish specifications.
Strut Systems
 B333 B451
SLOTTED THREE HOLE A SLOTTED THREE HOLE U-SUPPORT WITH GUSSET FOR
U-SUPPORT FOR B22 B22
• Standard finishes: ZN, GRN • Consists of B333-1, 2, or 3 with gusset plate welded on back
C • Material: ASTM A1011 HSLAS Gr. 50 A
9
/16” x 11/2” Slots-(2) (14.3) (38.1) • Standard finishes: ZN, GRN
B 9/16” x 11/2” Slots-(2) (14.3) (38.1)
15/8”
(41.3)

B408 B35
TWO HOLE BUS DUCT CLEVIS 1/2” TWO HOLE CLEVIS 13
/
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
(20.
(12.7) 9/16” (14.3) DIA.
17/
17/8” 2 HOLES
(47.
(47.6)
A

Part No. Wt./C

A (A) Lbs. kg
Part No. Wt./C B358-4 4” (101.6) 89 (40.3)
Lbs. kg
A (A) B358-5 5” (127.0) 93 (42.2)
B408-1 2 / ”
13 32 (61.1) 58 (26.3) 13
/16” (20.6) B358-6 6” (152.4) 106 (48.1)
B408-2 325/32” (96.0) 76 (34.5) B358-7 7” (177.8) 118 (53.5)
B408-3 43/4” (762.0) 88 (39.9) B358-8 8” (203.2) 132 (59.9)
B173 B595 B405
FOUR HOLE CLEVIS THREE HOLE CLEVIS THREE HOLE SUSPENSION CLEVIS
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 71 Lbs. (32.2 kg) • Wt./C 75 Lbs. (34.0 kg) • Wt./C 75 Lbs. (34.0 kg)
17/8” 17/8” 37/16”
(47.6) (47.6) (87.3)
121/32” 129/32” 121/32”
35/16”
(42.0) (48.4) (42.0)
(84.1) 35/16” 17/8”
(84.1) (47.6)

Part Wt./C
No. A (A) B (B) C (C) Lbs. kg

B333-1 71/2” (190.5) 15/16” (33.3) 27/8” (73.0) 103 (46.7)

B333-2 81/2” (215.9) 115/16” (49.2) 33/8” (85.7) 115 (52.1)
B333-3 103/8 (263.5) 27/8” (73.0) 45/16” (109.5) 135 (61.2)
Part No. ” Wt./C
A (A) Lbs. kg
B451-1 71/2” (190.5) 137 (62.1)
B451-2 81/2” (215.9) 156 (70.7)
B451-3 103/8” (263.5) 172 (78.0)
Strut Fittings

Reference page 72 for general fitting and standard finish specifica

Strut Systems 89
SUPPORT WITH GUSSET FOR

with gusset plate welded on back.

AS Gr. 50 A

38.1)

B358
CLEVIS 13
/16”
• Standard finishes: ZN, GRN
(20.6)
9/16” (14.3) DIA.
17/8”
2 HOLES
(47.6)
A

13
/16” (20.6)
 B405
EE HOLE SUSPENSION CLEVIS
• Standard finishes: ZN, GRN
• Wt./C 75 Lbs. (34.0 kg)
37/16”
(87.3)
121/32”
(42.0)
17/8”
(47.6)

ting and standard finish specifications.

89
 B398-1 B415
THREE HOLE CUP SUPPORT TWO HOLE BUS DUCT CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 73 Lbs. (33.1 kg) • Wt./C 56 Lbs. (25.4 kg)
111/16” 17/8”
(42.9) (47.6)
23/32” 1
11
/16” 325/32”
(53.2) (42.9) (96.0)
11/16” 15/8” 1
/ 2”
(27.0) (41.3) (12.7) 11/16”
(27.0)

B400 B400-1
THREE STUD ONE STUD
RING CONNECTION RING CONNECTION
• 1/2”-13 stud protrudes 1” • 1/2”-13 stud protrudes 1” (25.4mm)
(25.4mm) • Standard finishes: ZN
• Standard finishes: ZN • Wt./C 53 Lbs. (24.0 kg)
• Wt./C 85 Lbs. (38.5 kg) 111/16”
111/16” 1
11
/16” (42.9)
23/16” (42.9) (42.9)
(55.6)
B400-3 B400-4
TWO STUD TWO STUD
RING CONNECTION RING CONNECTION
• 1/2”-13 stud protrudes 1” (25.4mm) • 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN • Standard finishes: ZN
• Wt./C 59 Lbs. (26.7 kg) • Wt./C 59 Lbs. (26.7 kg)
111/16” 111/16”
111/16”
(42.9) 111/16”
(42.9)

(42.9) (42.9)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

90
LE BUS DUCT CONNECTION
d finishes: ZN, GRN
6 Lbs. (25.4 kg)

325/32”
(96.0)

11/16”

B400-2
ONE STUD
RING CONNECTION
• 1/2”-13 stud protrudes 1” (25.4mm)
• Standard finishes: ZN
• Wt./C 40 Lbs. (18.1 kg)
17/8”
7
1 /8” (47.6)
(47.6)
 B536
TAPPED U-SUPPORT
• Standard finishes: ZN
• Wt./C 87 Lbs. (39.4 kg)
15/8”
(41.3)
59/16”
(141.3)
Tapped 5/16”-18
(2) Holes

rd finish specifications.
Strut Systems
 B526 B106-52
TWO HOLE TWO HOLE
OFFSET Z-SUPPORT Z-SUPPORT FOR B52
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 38 Lbs. (17.2 kg) • Wt./C 40 Lbs. (18.1 kg)
1
/4” (6.3) 13
/16” (20.6)
315/32” 31/2”
(88.1) (88.9)
15/8”
(41.3)

B106-32 B106-12
TWO HOLE TWO HOLE
Z-SUPPORT FOR B32 Z-SUPPORT FOR B12
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 51 Lbs. (23.1 kg) • Wt./C 63 Lbs. (28.6 kg)
13/8” 27/16”
(34.9) (61.9)
31/2” 31/2”
(88.9) (88.9)
 B110 B586
THREE HOLE TWO HOLE Z-SUPPORT
Z-SUPPORT FOR B11 • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 90 Lbs. (40.8 kg)
• Wt./C 70 Lbs. (31.7 kg) 31/2”
3 / 2”
1 (88.9)
(88.9) 47/8” 15/8”
31/2” (123.8) (41.3)

(88.9)
15/8”
(41.3)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 91
 B106-42
TWO HOLE
Z-SUPPORT FOR B42
• Standard finishes: ZN, GRN
• Wt./C 44 Lbs. (20.0 kg)
1”
(25.4)
31/2”
(88.9)

B105
THREE HOLE
Z-SUPPORT FOR B22
• Standard finishes: ZN, GRN, HDG
• Wt./C 51 Lbs. (23.1 kg)
15/8”
(41.3)
31/2”
(88.9)
 B108
TWO HOLE
OFFSET Z-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 55 Lbs. (24.9 kg)
21/8”
(54.0)
31/2”
(88.9)

e 72 for general fitting and standard finish specifications.

91
 B387 B407
TWO HOLE Z-BUS DUCT CONNECTION TWO HOLE Z-SUPPORT
• Standard finishes: ZN, GRN • Standard finishes: ZN,
15/8” GRN 31/2”
(41.3) (88.9)
31/2” 15/8”
(88.9) (41.3) A
1
/ 2” (12.7)
A

B534 B535
TAPPED Z-SUPPORT TAPPED Z-SUPPORT
• Standard finishes: ZN • Standard finishes: ZN
• Wt./C 51 Lbs. (23.1 kg) • Wt./C 50 Lbs. (22.7 kg)
15/8” 15/8” 15/8”
(41.3) 15/8” (41.3) (41.3)

(41.3) 15/8”
15/8” (41.3)
(41.3) 5
/16”-18
5
/16”-18 Tapped Holes (2)
Tapped Hole
B538 B539
TAPPED CORNER CONNECTION TAPPED CORNER CONNECTION
• Standard finishes: ZN • Standard finishes: ZN
• Wt./C 71 Lbs. (32.2 kg) • Wt./C 68 Lbs. (30.8 kg)
15/8” 15/8” /16”-18 Tapped Holes (4)
5

(41.3) 31/2”
17/8” (41.3) (88.9)
(47.6) 7
1 /8” 31/2”
(47.6) (88.9)
5
/16”-18 Tapped Holes (2)

Wt./C
Part No. Lbs. kg
A (A)
B407-4 4” (101.6) 77 (34.9)
B407-5 5” (127.0) 95 (43.1)
B407-6 6” (152.4) 98 (44.4)
B407-7 7” (177.8) 105 (47.6)
B407-8 8” (203.2) 120 (54.4)
B407-95/8 95/8” (244.5) 138 (62.6)
Wt./C
Part No. Lbs. kg
A (A)
B387 43/4” (120.6) 89 (40.3)
B387-1 325/32” (96.0) 78 (35.4)
B387-2 213/32” (61.1) 62 (28.1)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

92
LE Z-SUPPORT
d finishes: ZN,
31/2”

B111
THREE HOLE SHEATH CORNER
CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 68 Lbs. (30.8 kg)
31/2”
31/2”
(88.9)
(88.9)
15/8”
(41.3)
15/8”
(41.3)
CORNER CONNECTION
d finishes: ZN
8 Lbs. (30.8 kg)
pped Holes (4)

ard finish specifications.

Strut Systems
B410-52 CHANNEL HANGER B410-32 CHANNEL HANGER
BRACKET FOR B52 BRACKET FOR B32
• Material: 11 Gauge (3.0) • Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50 ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 6.7 Lbs. (3.0 kg) • Wt./C 8.3 Lbs. (3.7 kg)
/16”
13
/16” (20.6)
13

/32” (7.1)
9
(20.6) /32” (7.1)
9

Dia. Hole Dia. Hole

13
/16” (20.6) 13/8”
(34.9)

B410-12 CHANNEL HANGER B410-11 CHANNEL HANGER

BRACKET FOR B12 BRACKET FOR B11
• Material: 11 Gauge (3.0) • Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50 ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 11.2 Lbs. (5.1 kg) • Wt./C 13.4 Lbs. (6.1 kg)
9
/32” (7.1) 13/16”
/16” (20.6)
13

Dia. Hole (20.6)

/32” (7.1)
9

27/16” Dia. Hole

(61.9) 31/4”
(82.5)
B515 B428
ADJUSTABLE OFFSET GUSSETTED Z-SUPPORT EIGHT HOLE GUSSETTED CORNER CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 93 Lbs. (42.2 kg) • Wt./C 203 Lbs. (92.1 kg)
15
/32” 17/8” 53/4”
(11.9) 1
3 /2” (47.6)
(146.0)
(88.9) 53/4”
9
/16” x 29/16” Slots (146.0)
37/8” (14.3) (65.1) 31/2”
(88.9)
(98.4) 17/8”
(47.6)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 93
B410-22 CHANNEL HANGER
BRACKET FOR B22
• Material: 11 Gauge (3.0)
ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)
/16” (20.6)
13

/32” (7.1)
9

Dia. Hole
15/8”
(41.3)

B580
FIVE HOLE
GUSSETTED Z-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)
31/2” 31/2”
(88.9) (88.9)

15/8”
(41.3)
OLE GUSSETTED CORNER CONNECTION
d finishes: ZN, GRN
03 Lbs. (92.1 kg)

e 72 for general fitting and standard finish specifications.

93
B267R B267L
THREE HOLE SINGLE CORNER THREE HOLE SINGLE CORNER
CONNECTION (RIGHT HAND) CONNECTION (LEFT HAND)
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 54 Lbs. (24.5 kg) • Wt./C 54 Lbs. (24.5 kg)
21/16” 21/16”
(52.4) (52.4)
15/8” 15/8”
(41.3) (41.3)
31/2” 31/2”
(88.9) (88.9)

B270L B268R
FOUR HOLE SINGLE CORNER FIVE HOLE SINGLE CORNER
CONNECTION (LEFT HAND) CONNECTION (RIGHT HAND)
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg) • Wt./C 100 Lbs. (45.3 kg)
111/16” 315/16”
(42.8) 15/8” (100.0)
21/16” (41.3)
(52.4) 31/2”
313/16” (88.9)
(96.8)
 B269R B269L
SIX HOLE SINGLE CORNER SIX HOLE SINGLE CORNER
CONNECTION (RIGHT HAND) CONNECTION (LEFT HAND)
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 120 Lbs. (54.4 kg) • Wt./C 120 Lbs. (54.4 kg)
31/2” 31/2”
(88.9) (88.9)
315/16” 315/16”
(100.0) (100.0)
53/8” 53/8”
(136.5) (136.5)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

94
 B270R
FOUR HOLE SINGLE CORNER
CONNECTION (RIGHT HAND)
• Standard finishes: ZN, GRN
• Wt./C 77 Lbs. (34.9 kg)
111/16”
(42.8)
21/16”
(52.4)
313/16”
(96.8)

B268L
FIVE HOLE SINGLE CORNER
CONNECTION (LEFT HAND)
• Standard finishes: ZN, GRN
• Wt./C 100 Lbs. (45.3 kg)
315/16”
(100.0) 15/8”
(41.3)
31/2”
(88.9)
 B119
FOUR HOLE DOUBLE CORNER
CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 71 Lbs. (32.2 kg)
21/16”
15/8”
(52.4)
(41.3)
31/2”
(88.9)

rd finish specifications.
Strut Systems
 B120 B121
SIX HOLE DOUBLE CORNER EIGHT HOLE DOUBLE CORNER
CONNECTION CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg) • Wt./C 152 Lbs. (68.9 kg)
15/8” 31/2”
315/16”
(41.3) (88.9) 3
15
/16”
(100.0) (100.0)
31/2” 53/8”
(88.9) (136.5)

B272 B273
EIGHT HOLE DOUBLE WING TEN HOLE DOUBLE WING
CONNECTION CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 156 Lbs. (70.7 kg) • Wt./C 185 Lbs. (83.9 kg)
57/16” 93/16”
(138.1) (233.4)
315/16” 315/16”
(100.0) 31/2”
(100.0)

15/8” (88.9)
111/16” 111/16”
(42.8) (42.8)
B123 B124
TWELVE HOLE TRIPLE WING NINE HOLE TRIPLE WING CONNECTION
CONNECTION • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 177 Lbs. (80.3 kg)
• Wt./C 234 Lbs. (106.1 kg) 57/16”
9 /16” 3 (138.1)
(233.4) 315/16”
31/2” 315/16” 15/8” (100.0)
(88.9) (100.0) (41.3)
111/16” 111/16”
(42.8) (42.8)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 95
 B271
FIVE HOLE DOUBLE WING
CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 95 Lbs. (43.1 kg)
57/16”
(138.1)
21/16”
(52.4)
15/8”
(41.3)
111/16”
(42.8)

B122
SIX HOLE TRIPLE WING CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 110 Lbs. (49.9 kg)
57/16”
(138.1)
21/16”
(52.4)
15/8”
111/16” (41.3)
(42.8)
 B276
FOURTEEN HOLE DOUBLE CORNE
GUSSETTED CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 196 Lbs. (88.9 kg)
4”
(101.6)
4”
(101.6)

e 72 for general fitting and standard finish specifications.

95
 B274R B274L
EIGHT HOLE SINGLE CORNER EIGHT HOLE SINGLE CORNER
GUSSETTED CONNECTION (RIGHT GUSSETTED CONNECTION (LEFT
HAND) HAND)
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 176 Lbs. (79.8 kg) • Wt./C 176 Lbs. (79.8 kg)
511/16” 521/32”
(144.5) (143.7)
315/16” 315/16”
(100.0) (100.0)
31/2” 31/2”
(88.9) (88.9)
111/16” 111/16”
(42.8) (42.8)

B277 B362
TWELVE HOLE TRIPLE WING EIGHT HOLE DOUBLE CORNER
GUSSETTED CONNECTION GUSSETTED CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 285 Lbs. (129.3 kg) • Wt./C 226 Lbs. (102.5 kg)
93/16” 4”
(233.4) (101.6)
315/16” 4”
31/2” (100.0) (101.6)
(88.9)
111/16”
(42.8)
 B346L B346R
EIGHT HOLE DOUBLE CORNER GUSSETTED CONNECTION EIGHT HOLE DOUBLE CORNER GUSSETTED CONNECT
(LEFT HAND) (RIGHT HAND)
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 242 Lbs. (109.8 kg) • Wt./C 242 Lbs. (109.8 kg)
53/8” 53/8”
(136.5) (136.5)
31/2” 31/2”
(88.9) (88.9)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

96
 B495
TEN HOLE DOUBLE WING GUSSETTED
CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 240 Lbs. (108.8 kg)
93/16”
(233.4)
37/8”
(98.4)
31/2”
(88.9)
111/16”
(42.8)

B571
EIGHT HOLE WING CONNECTION
• Standard finishes: ZN, GRN
• Wt./C 201 Lbs. (91.2 kg)
53/8”
(136.5)
315/16”
(100.0)
31/2”
(88.9) 15/8”
(41.3)
 B346R
OLE DOUBLE CORNER GUSSETTED CONNECTION
(RIGHT HAND)
• Standard finishes: ZN, GRN
• Wt./C 242 Lbs. (109.8 kg)
53/8”
(136.5)
31/2”
(88.9)

rd finish specifications.
Strut Systems
 B279 B279SQ B279FL
POST BASE FOR B22 POST BASE FOR B22 POST BASE FOR B22
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, G
• Wt./C 314 Lbs. (142.4 kg) • Wt./C 314 Lbs. (142.4 kg) • Wt./C 230 Lbs. (104.3 kg)
/ 4”
3
(19.0) 111/16” /4” (19.0)
3

(42.8) Dia .2 Holes

Dia .4 Holes 111/ 16” /4” (19.0)

3
1
Dia .4 Holes 15/8” (

6” (42.8) (41.3)
(152.4) 15/8” 41/4”
6” (41.3) (107.9)
6” 41/4” 6” 8”
(152.4) (107.9) (203.2)

(152.4) 3” (152.4)
(76.2)

B280 B280SQ B2
POST BASE FOR B22 POST BASE FOR B22 POST BA
• Standard finishes: ZN, GRN, HDG, SS4, AL • Standard finishes: ZN, GRN, HDG, SS4, AL • Standard finishe
• Wt./C 392 Lbs. (177.8 kg) • Wt./C 392 Lbs. (177.8 kg) • Wt./C 312
111/16” 111/16” 1
(42.8) (

3
1
3
/ 4” (19.0) (42.8) /4” (19.0)
3

Dia .4 Holes 31/2” / Dia .2 Holes

6” (88.9) 2
(152.4) ”
(
8
41/4 8
.
” 9
/ 4”
3
(19.0) )
Dia .4 Holes
61/4”
8” (158.7)
(203.2)
6” (107.9) 4
(152.4) 1

(152.4) 3” / 6”
(76.2) (152.4)
4
”
(
6” 1
B281A B281ASQ 0 B281AFL
7
POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, G
• Wt./C 330 Lbs. (149.7 kg) • Wt./C 330 Lbs. (149.7 kg) • Wt./C 250 Lbs. (113.4 kg)
Strut Fittings

/ 4”
3
(19.0) 35/16” 3
/4” (19.0)
Dia .4 Holes 3
/4” (19.0) Dia .2 Holes
15/8” Dia .4 Holes 61/4”
(41.3) 41/4”
6” 35/16” 15/8”
(152.4) (84.1) (41.3)

6” (107.9) 41/4” 8” (158.7)

(152.4) (107.9) 6” (203.2)
(152.4)
(152.4)

3”
(76.2)
6”
Reference page 72 for general fitting and standard finish specifica
Strut Systems 97
B279FL
POST BASE FOR B22
• Standard finishes: ZN, GRN
• Wt./C 230 Lbs. (104.3 kg)
/4” (19.0)
3

Dia .2 Holes

111/16”
(42.8)

15/8”
(41.3)
3”
61/4” (76.2)
(158.7)

B280FL
POST BASE FOR B22
• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 312 Lbs. (141.5 kg)
111/16”
(42.8)

/4” (19.0)
3

Dia .2 Holes

31/2”
(88.9)

B281AFL
POST BASE FOR B22A, B, C, ETC.
• Standard finishes: ZN, GRN
• Wt./C 250 Lbs. (113.4 kg)
 3
/ 4” (19.0) 35/16”
Dia .2 Holes (84.1)
61/4” 15/8”
(41.3)

(158.7)

3”
(76.2)

d standard finish specifications.

 B281 B281SQ B281FL
POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC. POST BASE FOR B22A, B, C, ETC
• Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN, HDG, SS4 • Standard finishes: ZN, GRN
• Wt./C 400 Lbs. (181.4 kg) • Wt./C 400 Lbs. (181.4 kg) • Wt./C 320 Lbs. (145.1 kg)
3
/4” (19.0) 35/16” /4” (19.0)
3 35/16”

Dia. 4 Holes (84.1) Dia. 2 Holes (84.1

35/16” 3
/4” (19.0) 31/2”
1
3 /2” (84.1) Dia. 4 Holes (88.9)
(88.9) 31/2” 61/4”
6” (88.9) 8”
(158.7)
(152.4) 6” 4 /4” (203.2)
1

6” (152.4) (107.9) 1
4 /4” 3”
(152.4) 3” (107.9) 6” (76.2)
(76.2) (152.4)

B281M B281MSQ B570

POST BASE FOR B22-2PL POST BASE FOR B22-2PL POST BASE FOR FOUR CHANNEL
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN COMBINATIONS
• Wt./C 470 Lbs. (213.2 kg) • Wt./C 470 Lbs. (213.2 kg) • Standard finishes: ZN, GRN
39/16” Dia. 4 Holes • Wt./C 397 Lbs. (180.1 kg)
(90.5) 3”
(152.4)
(76.2)
 B570A B278 B585 B3
POST BASE FOR FOUR POST BASE FOR B22 POST BASE FOR B22A POST BA
CHANNEL COMBINATIONS • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Material: Malleable
• Standard finishes: ZN, GRN • Wt./C 288 Lbs. (130.6 kg) • Wt./C 97 Lbs. (44.0 kg) • Standard finishes: ZN, G
• Wt./C 550 Lbs. (249.5 kg) 7 /16” 15/8” 15/ 31/16” • Wt./C 259 Lbs. (117.5
3 / 2”
1 (11.1) Dia. (41.3) 8”
(77.8)
4” 3/4” 3
/8 ”
(88.9) 4 Holes 31/2” (41.3) (101.6) (19.0)
Coun
4” (88.9)
13/4”
.3) 5” /4 ” (
3

(44.4)
6” (127.0) 5”
(152.4) (127.0) 31/2”
(88.9)

(177.8) 2
(5

” 6”
.2) (152.4)
/4” (19.0)
3

Dia. 4 Holes

111/16” 31/2” /4 ”
3
(19.0)
(42.8) (88.9)

/4” (19.0)
3

Dia. 4 Holes 31/2” 315/32”

(88.9) (87.9)
6” 6”
41/4”
(152.4) (152.4)
(107.9)
3” 6”
(152.4)

6”
(152.4)
Strut Fittings

3
(76
Reference page 72 for general fitting and standard finish specifications.
98
1/
(6
 B281FL
POST BASE FOR B22A, B, C, ETC.
• Standard finishes: ZN, GRN
• Wt./C 320 Lbs. (145.1 kg)
/4” (19.0)
3 35/16”

Dia. 2 Holes (84.1)

31/2”
(88.9)
61/4”
8”
(158.7)
(203.2)
3”
(76.2)

570
OST BASE FOR FOUR CHANNEL
OMBINATIONS
Standard finishes: ZN, GRN
Wt./C 397 Lbs. (180.1 kg)
(152.4)
 B300
POST BASE
• Material: Malleable Iron
• Standard finishes: ZN, GRN
• Wt./C 259 Lbs. (117.5 kg)
4” 3/4” 3
/8” (9.5
(101.6) (19.0)
Counters
To
) 13/4” 3
/4” (19.0
unk (44.4)
Dia.
9
) (1
7”
/16” (177.8) 21/16
4.4) (52.4)
”

15/8”
(41.3)

/ 4”
1
(6.3) 6”
6” (152.4)
(76.2) 3
/4” (19.0)
Dia. 4 Holes

fications.
Strut Systems
 B187 BRACKET
• Uniform Loading 1450 Lbs. (6.45 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 55/16” (150.8) Center to Center
• Standard finishes: ZN, GRN
• Wt./C 193 Lbs. (87.5 kg)
11/16” 21/4”

(27.0) (57.1)
4” 9”
(101.6) (228.6)

B189 BRACKET
• Uniform Loading 870 Lbs. (3.87 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 1115/16” (303.2) Center to Center
• Standard finishes: ZN, GRN
• Wt./C 308 Lbs. (139.7 kg)
11/16” 21/4”
(27.0) (57.1)

4”
(101.6)
15”
(381.0)
B190 12” (304.8) BRACKET
• Uniform Loading 900 Lbs. (4.00 kN)
• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 260 Lbs. (117.9 kg)
11/16”
(27.0)
/16” x 3”
9
Slot
(14.3) (76.2)
4”
12”
(101.6) (304.8)

71/2”
(190.5)
2”
(50.8)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 99
B188 BRACKET
• Uniform Loading 1080 Lbs. (4.80 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 815/16” (227.0) Center to Center
• Standard finishes: ZN, GRN
• Wt./C 241 Lbs. (109.3 kg)
11/16”
21/4”
(27.0)
(57.1)
4”
(101.6) 12”
(304.8)

B541 BRACKET
• Uniform Loading 1240 Lbs. (5.51 kN)
• Safety Factor of 2.5
• Hole Spacing on Bracket Top 77/16” (188.9) Center to Cente
• Standard finishes: ZN, GRN
• Wt./C 201 Lbs. (91.2 kg)
11/16” 21/4”

(27.0) (57.1)
4”
(101.6) 101/2”
(266.7)
 B191-18 18” (457.2) BRACKET
• Uniform Loading 600 Lbs. (2.67 kN)
• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 377 Lbs. (171.0 kg)
11/16”
(27.0)
4”
(101.6)
18”
(457.2)
71/2”
(190.5)
9
/16” x 3” Slot (14.3) (76.2)
2”
(50.8)

Reference page 72 for general fitting and standard finish specifications.

99
B191-24 24” (609.6) BRACKET
• Uniform Loading 450 Lbs. (2.00 kN)
1
1 /16” • Safety Factor of 2.5
(27.0) • Standard finishes: ZN, GRN
• Wt./C 377 Lbs. (171.0 kg)
”
.6)
71/2”
(190.5)
2”
(50.8)

B290 16 /2” (419.1) BRACKET

1

• Uniform Loading 1200 Lbs. (5.34 kN)

• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 405 Lbs. (183.7 kg)
13/16” 13/16”
(30.1) (30.1)
6” 51/4”

(152.4) (133.3) 1
16 /2”
31/8”
(419.1)
(79.4)
53/4”
(146.0)
21/2”
(63.5)
13/16”
(30.1)
B289-14 14 /2” (368.3) BRACKET
1

• Uniform Loading 900 Lbs. (4.00 kN)

• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 295 Lbs. (133.8 kg)
13/16”
(30.1) 13/16”
(30.1)
31/4”
6” (82.5)
31/8” 141/2”
(152.4)
(79.4) (368.3)

53/4”
(146.0)
21/2”
13/16”
(63.5) (30.1)

24”
(609.6)
24”
(609.6)
12”
(304.8)
9
/16” x 3” Slot
(14.3) (76.2)

9
/16” x 3” Slot
(14.3) (76.2)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

100
4
(10
1
B192 24” (609.6) BRACKET
11/16”
• Uniform Loading 820 Lbs. (3.65 kN
(27.0)
• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 576 Lbs. (261.3 kg)
6”
(152.4)
27/16”
(61.9)
2”
(50.8

B289-12 12 /2” (317.5) BRACKET

1

• Uniform Loading 1040 Lbs. (4.63 kN)

• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 285 Lbs. (129.3 kg)
13/16”
(30.1) 13/16”
(30.1)
6”
31/4”
121/2”
(82.5)
(317.5)
(152.4)
31/8”
(79.4)
33/4”
(95.2)
21/ 13/16”
2”
(30.1)
(63.5)
 B291 18 /2” (469.9) BRACKET
1

• Uniform Loading 1070 Lbs. (4.76 kN)

• Safety Factor of 2.5
• Standard finishes: ZN, GRN
• Wt./C 468 Lbs. (212.3 kg)
13/16”
(30.1) 3
1 /16”
(30.1)
6” 51/4”

(152.4) (133.3)

1
3 /8” 18 /2”
1

(79.4) (469.9)
73/4”
(196.8)
21/2”
(63.5)
13/16”
(30.1)

eral fitting and standard finish specifications.

100 Strut Systems
)
B292 20 /2” (520.7) BRACKET
1
B297 /16” 13 2”

• Uniform Loading 600 Lbs. (2.67 kN) DOUBLE CHANNEL (20.6) (50.8)

• Safety Factor of 2.5 BRACKET 61/

3/8”

• Standard finishes: ZN, GRN, HDG, SS4 • Safety Factor of 2.5 4” (9.5)

• Wt./C 490 Lbs. (222.2 kg) • Standard finishes: (158.7)

13/16” ZN, GRN, HDG A

(30.1) 13/16” 45/8”
(30.1) (117.5)
B22A
6”
71/4”
(152.4) (184.1) 201/ ”
31/8” 2

(520.7)
(79.4)
73/4”
21/2”
(196.8)

(63.5)
13/16”
(30.1)

B409 B494
13/16” 11/2”
SINGLE CHANNEL BRACKET (20.6)
13
/16” (38.1) BRACED

• Safety Factor of 2.5 (20.6) SINGLE BRACKET

• Standard finishes: ZN, GRN, SS4 H • Safety Factor of 2.5

45/8” 2”
• Standard finishes:
(117.5) (50.8)
15/8” L ZN, GRN
A (41.3)
3” 4”
(76.2) B22 (101.6)
Inside Brace on B494-24 and Larger.
B42

Part Uniform Load Wt./C Part Uniform Load Wt. /C

No. A Lbs. kN Lbs. kg No. L H Lbs. kN Lbs. kg

B409-6 6” (152.4) 1920 (8.54) 152 (68.9) B494-12 12” (304.8) 83/4” (222.2) 1580 (7.02) 364
B409-9 9” (228.6) 1280 (5.69) 195 (88.4) B494-18 18” (475.2) 83/4” (222.2) 1000 (4.45) (165.
479
B409-12 12” (304.8) 960 (4.27) 232 (105.2) B494-24 24” (609.6) 83/4” (222.2) 996 (4.43) (217.
716
B409-14 14” (355.6) 800 (3.56) 274 (124.3) B494-30 30” (762.0) 111/4” (285.7) 924 (4.11) (324.
927
B409-16 16” (406.4) 730 (3.25) 314 (142.4) (420.
B494-36 36” (914.4) 111/4” (285.7) 864 (3.84) 1095
B409-18 18” (457.2) 640 (2.84) 347 (157.4) (496.
B494-42 42” (1066.8) 16” (406.4) 580 (2.58) 1400
B409-24 24” (609.6) 480 (2.13) 450 (204.1) B494-48 48” (1219.2) 16” (406.4) 500 (2.22) 1510(635.
(684.9)

Part No. Uniform Load Wt./C

A Lbs. kN Lbs. kg

B297-12 12” (304.8) 1660 (7.37) 485 (220.0)

B297-18 18” (457.2) 1100 (4.88) 668 (303.0)
B297-24 24” (609.6) 835 (3.71) 857 (388.7)
B297-30 30” (762.0) 665 (2.95) 1040 (471.7)
B297-36 36” (914.4) 550 (2.44) 1240 (562.4)
B297-42 42” (1066.8) 465 (2.06) 1440 (653.2)
 B174SH-B186SH
L&R SLOTTED BRACKET
• Safety Factor of 2.5
• Specify L for left or R for right bracing
• Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN

Part Uniform Load Wt./C

No. A B Lbs. kN Lbs. kg

B174SH 24” (609.6) 67/16” (163.5) 225 (1.00) 370 (167.8)

B175SH 26” (660.4) 615/16” (176.2) 225 (1.00) 425 (192.8)
B176SH 28” (711.2) 77/16” (188.9) 225 (1.00) 480 (217.7)
B177SH 30” (762.0) 715/16” (201.6) 225 (1.00) 520 (235.9)
B178SH 12” (304.8) 37/16” (87.3) 350 (1.55) 143 (64.8)
B179SH 14” (355.6) 315/16” (100.0) 350 (1.55) 162 (73.5)
B180SH 16” (406.4) 47/16” (112.7) 250 (1.11) 204 (92.5)
B181SH 18” (457.2) 415/16” (125.4) 250 (1.11) 232 (105.2)
B182SH 20” (508.0) 57/16” (138.1) 250 (1.11) 275 (124.7)
B183SH 22” (558.8) 515/16” (150.8) 250 (1.11) 317 (143.8)
B184SH 6” (152.4) 115/16” (49.2) 225 (1.00) 58 (26.3)
B185SH 8” (203.2) 27/16” (61.9) 225 (1.00) 82 (37.2)
B186SH 10” (254.0) 215/16” (74.6) 325 (1.44) 103 (46.7)
Strut Fittings

Mounting Hole Right bracket shown, left bracket gussett on opposite side.
7
/16” (11.1) Dia.
Reference page 72 for general fitting and standard finish specifica
Strut Systems 101

9 32/ ” 2”
(7.1) (50.
Dia. 8)
Holes
 / ”
9 32 2”
(7.1) (50.
Dia. 8)
Holes A

B
/ ” x 1”
13 32

2” 1” Slot (10.3)
(50. (25. (25.4)
8) 4)
7 /16” 13 2”

OUBLE CHANNEL (20.6) (50.8)

RACKET 61/
3/8”

4”
afety Factor of 2.5 (9.5)

tandard finishes: (158.7)

, GRN, HDG A
8”
5)
B22A

B494
”
” (38.1) BRACED
SINGLE BRACKET
)
• Safety Factor of 2.5
andard finishes:
” L ZN, GRN
)

6)
e Brace on B494-24 and Larger.

art Uniform Load Wt. /C

o. L H Lbs. kN Lbs. kg

B494-12 12” (304.8) 83/4” (222.2) 1580 (7.02) 364

B494-18 18” (475.2) 83/4” (222.2) 1000 (4.45) (165.1)
479
B494-24 24” (609.6) 83/4” (222.2) 996 (4.43) (217.3)
716
B494-30 30” (762.0) 111/4” (285.7) 924 (4.11) (324.8)
927
(420.5)
B494-36 36” (914.4) 111/4” (285.7) 864 (3.84) 1095
(496.7)
B494-42 42” (1066.8) 16” (406.4) 580 (2.58) 1400
94-48 48” (1219.2) 16” (406.4) 500 (2.22) 1510(635.0)
4.9)
et gussett on opposite side.

e page 72 for general fitting and standard finish specifications.

101
B196 13/16” B198
CHANNEL (20.6) CHANNEL CLEVIS BRACKET
CLEVIS • Safety Factor of 2.5
BRACKET • Standard finishes: 13/16”

• Safety Factor of 2.5 3

5 /8” ZN, GRN
• Standard finishes: (136.5)
(20.6)
ZN, GRN 31/2”
A (88.9)
35/8” A
(92.1) B22
B22

B198A B293 13
/16”
CHANNEL CLEVIS BRACKET CHANNEL BRACKET (20.6)

• Safety Factor of 2.5 • Safety Factor of 2.5

13/16”

• Standard finishes: (20.6) • Standard finishes: 31/2” 11/2”

ZN, GRN ZN, GRN (88.9)
(38.1)
31/2” A
(88.9) B22
A

Part Uniform Load

No. A (A) Lbs. kN
B22
Part Uniform Load Wt./C B293-6 6” (152.4) 1200 (5.34)
No. A (A) Lbs. kN Lbs. kg
B293-12 12” (304.8) 600 (2.67)
B198A-6 6” (152.4) 1600 (7.12) 185 (83.9) B293-18 18” (457.2) 400 (1.78)
B198A-12 12” (304.8) 800 (3.56) 284 (128.8) B293-24 24” (609.6) 300 (1.33)

B293A
13/16” B194 BRACKET FOR B22 & B24
CHANNEL BRACKET (20.6) • Safety Factor of 2.5
• Safety Factor of 2.5 • 6300 In.-Lbs (712 N•m) applies to fitting only, not to strengt
• Standard finishes: of strut arm
ZN, GRN 1
3 /2”
11/2” • Refer to page 223 for strut 13/32”
(88.9) (38.1) • loading data ZN, GRN (27.8) B22
A Standard finishes:
B22 • Wt./C 210 Lbs. (95.2 kg)
63/8”
(161.9)
23/16”
B22
(55.6)
33/4”
(95.3)
Part Uniform Load Wt./C
No. A (A) Lbs. kN Lbs. kg

B293A-6 6” (152.4) 1200 (5.34) 144 (65.3)

B293A-12 12” (304.8) 600 (2.67) 252 (114.3)
B293A-18 18” (457.2) 400 (1.78) 340 (154.2)
B293A-24 24” (609.6) 300 (1.33) 412 (186.9)
 Part Uniform Load Wt./C
No. A (A) Lbs. kN Lbs. kg

B198-6 6” (152.4) 1600 (7.12) 185 (83.9)

B198-12 12” (304.8) 800 (3.56) 284 (128.8)
Part Uniform Load Wt./C
No. A (A) Lbs. kN Lbs. kg

B196-18 18” (457.2) 600 (2.67) 430 (195.0)

B196-24 24” (609.6) 450 (2.00) 510 (231.3)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

102
3/16”

11/2”
)

Wt./C
Lbs. kg

144 (65.3)

252 (114.3)
340 (154.2)
412 (186.9)

B24

to fitting only, not to strength

13/32”

B22
Strut Systems
B370 BRACKET FOR B22A & B11 B195 BRACKET FOR B42
• Safety Factor of 2.5 13/32” • Safety Factor of 2.5
• 13000 In.-Lbs (1469 N•m) applies (27.8) B22 • 2500 In.-Lbs (282 N•m) applies
to fitting only, not to strength of to fitting only, not to strength B22
of strut arm

strut arm 21/8”

• Refer to page 217 for strut loading data • Refer to page 217 for strut (54.0)

• Standard finishes: ZN, GRN loading data

• Wt./C 266 Lbs. (120.6 kg) 8” • Standard finishes: ZN, GRN
(203.2) • Wt./C 174 Lbs. (78.9 kg)
315/16” B22A 37/8”
(100.0) (98.4)
33/4” B42
(95.2) 33/4”
(95.2)

B440 B449-4, 8 & 12 13/16”

BRACKET FOR B52 & B54 CABLE SADDLE

• Safety Factor of 2.5 BRACKET (20.6)

• 2000 In.-Lbs (226 N•m) applies to fitting only, not to strength • Safety Factor of 2.5
of strut arm • Material:
• Refer to page 217 for strut loading data 11 Gauge (3.0) B
• Standard finishes: ZN, GRN 21/8” B22 ASTM A1011
• Wt./C 177 Lbs. (80.3 kg) HSLAS Gr. 50
(54.0) • Standard finishes: A
37/8” ZN, GRN
(98.4) 2”
B52 (50.8
33/4”
(95.2)

Part Uniform Load

No. A B Lbs. kN

B449-4 41/2” (114.3) 23/8” (60.3) 2400

B449-8 81/2” (215.9) 23/8” (60.3) 1270
B449-18 B449-12 121/2 (317.5) 4” (101.6) 860
18” (457.2) CABLE SADDLE BRACKET ”
• Safety Factor of 2.5
• Uniform Load 960 Lbs. (4.17 kN)
• Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50
• Standard finishes: ZN, GRN
• Wt./C 312 Lbs. (141.5 kg)
13
/16”
(20.6) 2”
(50.8)
4”
(101.6)
18”
(457.2)
B449-18
18” (457.2) CABLE SADDLE BRACKET
• Safety Factor of 2.5 B293PL
• Uniform Load 960 Lbs. (4.17 kN) BRACKET PLATE ONLY
• Material: 11 Gauge (3.0) ASTM A1011 HSLAS Gr. 50 • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 46 Lbs. (20.8 kg)
• Wt./C 312 Lbs. (141.5 kg) 11/2”
13
/16” (38.1)
(20.6) 2”
31/2” 120°

(50.8) (88.9) 13/16”

4” (20.6)
(101.6) 11/4”
18” (31.7)
(457.2)
Strut Fittings

Reference page 72 for general fitting and standard finish specific

Strut Systems 103
 of strut arm
B22

(54.0)

Uniform Load Wt./C

Lbs. kN Lbs. kg

(10.67) 74 (33.5)
(5.65) 124 (56.2)
(3.82) 184 (83.4)
3PL
LATE ONLY
shes: ZN, GRN
bs. (20.8 kg)
2”
.1)
120°
13/16”

.6)
4”
.7)

and standard finish specifications.

B816
• Standard finishes: ZN, HDG
2”
(50.8)
23/8” (60.3)
21/8”
(54.0)
9
/16” (14.3)
9
/16” x 29/16” Slot (14.3) (65.1)
11
/16” x 1” Slot (17.4) (25.4)

B802D-W
• Specify W = 8, 12, 16
• Standard finishes: ZN, HDG
/16”
13
(20.6) Dia.
95/8”
(244.5)
W

61/2”
 (165.1)
14”
(355.6)

14”
(355.6)
W
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

104
B852S-W-D
• Specify W = 8, 12, 16
• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13
/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG
/32” (10.3) Dia.
13

/16” (20.6) Dia.

13

725/32”
(197.6)
D
13
/16” x 1” Slot (20.6) (25.4)

B810-W
• Specify W = 8, 12, 16
• 13/16” (20.6mm) x 1” (25.6mm) banding slots for steel band
• Standard finishes: ZN, HDG
13
/32” (10.3) Dia.
13
/16” (20.6) Dia.
W
725/32”
(197.6)
/16”
13
x 1” Slot
(20.6) (25.4)
ral fitting and standard finish specifications.
104 Strut Systems
B811-W
• Can be attached directly to B809 &
B812
• Specify W = 8, 12, 16
• Standard finishes: ZN, HDG

121/32”
(42.1)

27/16” W
(61.9)

13
/16”

(20.6)

B809B-*
• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG
Strut Fittings

Part No. D H
In. mm In. mm

B809B-6 6” (152.4) 123/4” (323.9)

B809B-8 8” (203.2) 143/4” (374.7)
B809B-10 10” (254.0) 163/4” (425.5)
B809B-12 12” (304.8) 183/4” (476.2)
B809B-16 16” (406.4) 223/4” (577.8)
B809B-18 18” (457.2) 24 / ”
3 4 (628.6)
B809B-24 24” (609.6) 273/4” (704.8)
 Reference page 72 for general fitting and standard finish specifica
Strut Systems 105
 B812-*
• Specify D = 6, 8, 10, 12, 16, 18, 24
• 13/16” (20.6mm) x 1” (25.4mm) banding slots for steel band
• Standard finishes: ZN, HDG
/32” (10.3) Dia.
13

/16” (20.6) Dia.

13

725/32”
(197.6)
D /16”
13
x 1” Sl (20.6) (25.4)

ot

lots for steel band

Reference page 72 for general fitting and standard finish specifications.
105

/ ”
13 32 (10.3)
Dia.
/ ”
13 16 (20.6)
Dia.

725/32
”
(197.6) / ” x 1”
13 16
Slot (20.6)
(25.4)
H
 B214 R&L
REEL RACK SUPPORT FOR 11/4” (32)
PIPE
• Standard finishes: ZN, GRN
• Wt./C 200 Lbs. (90.7 kg)
3” 3”

(76.2) (76.2)

53/8” 3
5 /8”
(136.5) (136.5) A
B214R
Right Hand

B214L
Left Hand
B475
DOUBLE REEL RACK SUPPORT ON
SINGLE CHANNEL FOR 11/4” (32) PIPE
• Standard finishes: ZN, GRN
• Wt./C 326 Lbs. (147.9 kg) 3”
(76.2)

9”
(228.6)

B474
DOUBLE REEL RACK
CHANNEL FOR 11/4” (32) PIPE
• Standard finishes: ZN, GRN
• Wt./C 257 Lbs. (116.6 kg)
31/4”
(82.5)

53/8”
Strut Fittings (136.5)

Reference page 72 for general fitting and standard finish specifications.

106
 B514 R&L
REEL RACK SUPPORT FOR 2” (50) PIPE
• Standard finishes: ZN, GRN
• Wt./C 246 Lbs. (111.6 kg)
5
3 /8” 35/8”
(92.1) (92.1)
53/8” 3
5 /8”
(136.5) (136.5)
B514R
Right Hand

B514L
Left Hand
B473
DOUBLE REEL RACK SUPPORT ON SINGLE CHANNEL FOR
2” (50) PIPE
• Standard finishes: ZN, GRN
• Wt./C 351 Lbs. (159.2 kg) 3”
(76.2)
9”
(228.6)

B472
DOUBLE REEL RACK SUPPORT ON DOUBLE CHANNEL
FOR 2” (50) PIPE
• Standard finishes: ZN, GRN
• Wt./C 299 Lbs. (135.6 kg)
31/4”
(82.5)
53/8”
(136.5)
ral fitting and standard finish specifications.
106 Strut Systems
B664 B438
DOUBLE PIPE SUPPORT FOR 11/4” (32) PIPE PIPE SUPPORT BRACKET
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 154 Lbs. (69.8 kg) • Material: ASTM A36
13/4”
35/16” • Wt./C 132 Lbs. (59.9 kg)
(44.4) (84.1) 41/4”
Holes 9/16”(14.3) (107.9)
31/2” 3
/ 8”
(88.9) 4” (9.5)

13/4” (101.6)
(44.4)
13
2 /16” 325/32”
(71.4) (96.0)

B439 B411 SERIES

PIPE SUPPORT BRACKET LADDER RUNGS
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 88 Lbs. (39.9 kg) 13
/16”
3 / 2”
1
(20.6) A
(88.9) 13
/16” (20.6)
1
/ 4”
4”
(6.3)
(101.6)

Wt./C
Part No. A (A) Lbs. kg

B411-12 12” (304.8) 176 (79.8)

B411-15 15” (381.0) 202 (91.6)
B411-18 18” (457.2) 234 (106.1)

B381-B385 B587-1/2, 3/4 & 1

WALL LADDER BRACKETS 13/16” PIPE COUPLING FITTING
• Standard finishes: ZN, GRN • Safety Factor of 2.5
(20.6) • Standard finishes: ZN, GRN Design Load

C B 2 /16”
11 53/8”

2” I.D. (68.2) (136.5)

A (50.8)

Part No. Wt./C Design Load

A (A) B (B) C (C) Lbs. kg Wt./C Lbs. kN
Part No. For Pipe Size
B381 23/8” (60.3) 6” (152.4) 75/8” (193.7) 110 (49.9) Lbs. kg
B382 43/8” (111.1) 8” (203.2) 95/8” (244.5) 164 (74.4)
B382 43/8” (111.1) 8” (203.2) 95/8” (244.5) 164 (74.4)
B383 63/8” (161.9) (254.0) 115/8” (295.3) 200 (90.7) B587-1/2 /2” (15) 77 (34.9) 1000
B384 8 /8”
3 10”
(212.7) (304.8) 135/8” (346.1) 253 (114.7) B587-3/4 3
/4” (20) 84 (38.1) 1400
B385 3 12”
10 /8” (263.5) (355.6) 155/8” (396.9) 318 (144.2) B587-1 1” (25) 105 (47.6) 1900
14”
Strut Fittings

1
Reference page 72 for general fitting and standard finish specifica
Strut Systems 107
RACKET
ZN, GRN
A36
59.9 kg)

oad

Design Load
Lbs. kN
 (4.45)
(6.23)
(8.45)

standard finish specifications.

B349 21/8” B350
(54.0) TROLLEY BEAM JOINT SUPPORT
TROLLEY BEAM SUPPORT 315/16” • Design Load 1200 Lbs. (5.34 kN)
• Design Load 1200 Lbs. (5.34 kN) (100.0)
• Use 3/8” x 3” bolts in side hole to clamp 21/8”
• Safety Factor of 2.5 7
/16”(11.1) Dia. strut together (not included) (54.0)
2 Holes
• Use 3/8” x 3” bolts in side hole to clamp • Standard finishes: ZN, GRN 9/16”(14.3) Dia.
strut together (not included) • Wt./C 233 Lbs. (105.7 kg) 1 Hole 315/16”
31/2”
• Standard finishes: ZN, GRN (100.0)
(88.9)
• Wt./C 107 Lbs. (48.5 kg)
/16”(14.3) Dia.
9
7
/16”(11.1) Dia.
1 Hole
11/32” 6 Holes
(26.2)
13/32”
121/32” 21/32” (27.8)

(42.0) (16.7)

11/32”
(26.2)
15/8”
121/32” (41.3)
(42.0)

B614 B613 B613A

COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B52
• Design Load 800 Lbs. (3.56 kN) Slip with • Design Load 800 Lbs. (3.56 kN) Slip w
• Quick installation (one bolt to tighten) Safety Factor of 3 Safety Factor of 3
• Design Load 800 Lbs. (3.56 kN) Slip • Use with B22 and B24 Channel • Use with B52 and B54 Channel
with Safety Factor of 3 • Setscrews to be torqued to 19 ft./Lbs • Setscrews to be torqued to 19 ft./Lb
• Use with B22 and B24 Channel • Sold in pairs • Sold in pairs
• Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN, HDG
• Sold in pairs
• Wt./C 100 Lbs. (45.3 kg) • Wt./C 100 Lbs. (45.3 kg)
• Standard finish: ZN 15/8” 15/8”
• Wt./C 50 Lbs. (22.6 kg) (41.3) (41.3)
31/2” 31/2”
(88.9) (88.9)
3
/8” x 2” Cone Point Setscrews 3
/8” x 2” Cone Point Setscrews

B560 B562
45° STAIR SUPPORT 37-1/2° STAIR SUPPORT
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 220 Lbs. (99.8 kg) • Wt./C 206 Lbs. (93.4 kg)
87/8” 87/8”
(225.4) (225.4)
31/2” 31/2”
1
3 /2” (88.9) 1
3 /2” (88.9)
(88.9) (88.9)
13
/16” (20.6) 11/16” 13
/16”
(27.0) (20.6)
45° 17/8”
33/4” (47.6)
(95.2)
 (27.0) (20.6)
45°
33/4”
(95.2)

Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

108
UPPORT
34 kN)
hole to clamp 21/8”
) (54.0)

N 9/16”(14.3) Dia.
1 Hole 315/16”

B613A
COLUMN SUPPORT FOR B52
sign Load 800 Lbs. (3.56 kN) Slip with
Safety Factor of 3
Use with B52 and B54 Channel
etscrews to be torqued to 19 ft./Lbs
• Sold in pairs
Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)
15/8”
(41.3)
31/2”
(88.9)
3
/8” x 2” Cone Point Setscrews

11/16”
(27.0) 17/8”
371/2° (47.6)
 33/4”

(95.2)

tions.
Strut Systems
15
/16” (23.8) 3”
Design Load in B22 (76.2)

Lbs. kN RPM Design Load

300 (1.33) @600

450 (2.00) @300
600 (2.67) @100
Design Load in B22
Lbs. kN RPM

150 (0.67) @600

225 (1.00) @300
437 (1.94) @100
B477 11/4 B478
TWO BEARING LIGHT DUTY TROLLEY ” FOUR BEARING LIGHT DUTY T
ASSEMBLY 5
/ 8” ASSEMBLY
/
• Design Load 50 Lbs. (.22 kN) 8 • Design Load 100 Lbs. (.44 kN)
• Safety Factor of 2.5 ” • Safety Factor of 2.5
• Stainless steel ball bearings 6 • Stainless steel ball bearings
• Not for continuous cycling applications ) • Not for continuous cycling app
• Material:12 Gauge (2.6) ASTM A1011 33,000 PSI 3 • Material:12 Gauge (2.6) ASTM A
min. yield 2 33,000 PSI min. yield
• Standard finishes: ZN 13
” • Standard finishes: ZN
• Wt./C 30 Lbs. (13.6 kg) ( ( • Wt./C 68 Lbs. (30.8 kg)
8 B478P
B477P .
WITH PLASTIC BEARINGS 7 WITH PLASTIC BEARINGS
• Design Load ) • Design Load

11
(28.

11/4kN)
10 Lbs. (.045 ” /32” (7.1)
9 (15.9) 20 Lbs. (.090 kN)
3
/ 4” (19.0) Dia. Hole /32” x 9/16”
9
Slot-(2) (7.1) (14.3)
3
/ 4”
(19.0)
2”
(50.8)
(31.7)
3”
Design Load
B477H B478H
 TWO BEARING LIGHT DUTY 1
TROLLEY ASSEMBLY WITH EYE HOOK 1

• Design Load 50 Lbs. (.22 kN) /

• Safety Factor of 2.5 4
• Stainless steel ball bearings ”
• Not for continuous cycling applications ( 1
• Material:12 Gauge (2.6) ASTM A1011 33,000 PSI 3 1

min. yield 1
. /
• Standard finishes: ZN 8
7
• Wt./C 36 Lbs. (16.3 kg) ) ”
B477HP WITH PLASTIC BEARINGS (
2
8
315/16” .
6
Strut Fittings

• Design Load 10 Lbs. 1

/ 4”(6.3) EYE ROD (100.0) 1
• Design Load 20 Lbs. (.090
1
(.045 kN) Design Load kN)
3
/4” I.D (19.0) / 3
/4” I.D (19.0)
3
2
”

(
Reference page 72 for general fitting and standard finish specifica
Strut Systems 109

B376 B377
FOUR BEARING TROLLEY TWO BEARING TROLLEY ASSEMBLY
ASSEMBLY
• Safety Factor of 2.5
• Stainless steel ball
bearings
• Not for continuous
cycling applications
B376 35/16 B377
FOUR BEARING TROLLEY ” 15/16 TWO BEARING TROLLEY ASSEMBLY
ASSEMBLY (84.1) ”(33.3) • Safety Factor of 2.5
• Safety Factor of 2.5
• Stainless steel ball • Stainless
• Not for steel ball
continuous
11/8” (28.6)
Bearing O.D.
bearings cycling applications
13bearings
/16” (20.6) • Standard finishes: ZN
• Not for continuous
• Standard finishes: ZN 5/8” (15.9) • Wt./C 48 Lbs. (21.8 kg)
cycling applications
33/8”
• Wt./C 110 Lbs. (49.9 kg)
(85.7)

(31.7)

/4”
44.4)

11/
 B478
FOUR BEARING LIGHT DUTY TROLLEY
ASSEMBLY
• Design Load 100 Lbs. (.44 kN)
• Safety Factor of 2.5
• Stainless steel ball bearings
• Not for continuous cycling applications
• Material:12 Gauge (2.6) ASTM A1011
33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 68 Lbs. (30.8 kg)
B478P
WITH PLASTIC BEARINGS
• Design Load

9
/32”

20 Lbs. (.090 kN) (7.1)

/32” x 9/16”
9
Slot-(2) (7.1) (14.3) Dia. Hole
3
/ 4”
(19.0)
2”
(50.8)
(76.2)

Design Load
B478H
 FOUR BEARING LIGHT DUTY TROLLEY ASSEMBLY WITH
EYE HOOK
• Design Load 100 Lbs. (.44 kN)
• Safety Factor of 2.5
• Stainless steel ball bearings
• Not for continuous cycling applications
• Material:12 Gauge (2.6) ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN
• Wt./C 72 Lbs. (32.6 kg)
B478HP WITH PLASTIC BEARINGS

• Design Load 20 Lbs. (.090 /4” (6.3) EYE ROD

1

kN) Design Load

3
/4” I.D (19.0)

r general fitting and standard finish specifications.

109

ARING TROLLEY ASSEMBLY

ARING TROLLEY ASSEMBLY
Factor of 2.5
steel ball
continuous
15/16”
plications
(33.3)
d finishes: ZN
8 Lbs. (21.8 kg)
11/8” (28.6)
Bearing O.D.

33 /8 13/16
” ”
(85.7 (20.6)
)
11 /4
”
(31.7
)
Design Load
B203-B206 & B220-B223 B283-B286
CHANNEL END CAPS TYPE X A CHANNEL END CAPS
• Material: ASTM A1011 CS Type B • Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN, HDG, SS4, AL • Standard finishes: ZN, GRN
A
B

B287 & B288 B3322, B3332, B3342, B3352

CHANNEL END CAPS ANCHOR END CAPS TYPE Y
• Material: ASTM A1011 33,000 PSI min. yield • Material: ASTM A1011 33,000 PSI min. yield
• Standard finishes: ZN, GRN • Standard finishes: ZN
119/32”
119/32” 3
/8” (9.5)
(40.5)
(40.5) Dia. Hole
25/8”
(66.7)
A
113/16” B
(46.0)

Part
No. Use With A (A) B
Part Wt./C
No. Use With Lbs. kg B3322 B22I 1.270 (32.2) 13/16”
B3332 B32I 1.000 (25.4) 13/16”
B287 B22 13 (5.9) B3342 B42I 0.645 (16.4) 11/4”
B288 B24 14 (6.3) B3352 B52I 0.460 (11.7) 15/16”
B822 B822A B852
PLASTIC END CAP FOR B22 & B24 PLASTIC END CAP FOR B22A & B11 PLASTIC END CAP FOR B52
• Material: Soft White PVC • Material: Soft White PVC • Material: Soft White PVC
• Wt./C 3 Lbs. (1.3 kg) • Wt./C 5 Lbs. (2.2 kg) • Wt./C 2.5 Lbs. (1.1 kg)
• Available in colors: White (W), Yellow • Available in colors: White (W), Yellow • Available in colors: White (W), Yellow
(Y), Black (BLK), Gray (GRY), Green (Y), Black (BLK), Gray (GRY), Green (GRN) (Y), Black (BLK), Gray (GRY), Green
(GRN) 11/4” (GRN)
11/4” (31.7) 11/4”
(31.7) (31.7)

Part Wt./C
No. Use With Lbs. kg
A (A)
B203 B42 1.015 (25.8) 6 (2.7)
B204 B54 0.827 (21.0) 5 (2.2)
B205 B22 1.640 (41.6) 10 (4.5)
B206 B32 1.390 (35.3) 8 (3.6)
B220 B52 0.827 (21.0) 4 (1.8)
B221 B12 2.452 (62.3) 15 (6.8)
B222 B11 3.265 (82.9) 20 (9.1)
B223 B24 1.640 (41.6) 10 (4.5)
Part Wt./C
No. Use With Lbs. kg
A (A) B (B)
B283 B52 119/32” (40.5) /32”
25 (19.8) 6 (2.7)
B284 B54 & B56 119/32” (40.5) /32”
25 (19.8) 6 (2.7)
B285 B22 119/32” (40.5) 119/32” (40.5) 13 (5.9)
B286 B24 & B26 119/32” (40.5) 119/32” (40.5) 14 (6.3)
Strut Fittings

Reference page 72 for general fitting and standard finish specifications.

110
-B286
END CAPS
1 33,000 PSI min. yield
ishes: ZN, GRN
A
B

352
PSI min. yield

Wt./C
(B) Lbs. kg
(30.2) 15 (6.8)
(30.2) 15 (6.8)
(31.8) 15 (6.8)
(33.3) 15 (6.8)
END CAP FOR B52
l: Soft White PVC
5 Lbs. (1.1 kg)
e in colors: White (W), Yellow
(BLK), Gray (GRY), Green

s.
Strut Systems
 B823 B825
PROFILE END CAPS PLASTIC END CAPS
• Material: PVC • Material: Polyurethane
• Available in colors: White (W), Yellow (Y), Black (BLK), Gray • Available in colors: Gray (GRY), Green (GRN)
(GRY), Green (GRN)
Approx. 3/4” deep
(19.0)

Fits Channel Sizes Wt./C

Part No. Lbs. kg

B823-22A B22A, B24A, B26A 6.9 (3.1)

B823-22 B22, B24, B26 4.1 (1.8)
B823-42 B42 3.8 (1.7)
B823-52 B52, B54, B56 3.5 (1.6)
Fits Channel Sizes Wt./C
Part No. Lbs. kg

B825-22 B22 & B24 2.0 (0.9)

B825-52 B52 & B54 1.0 (0.4)

B408SLBVNS Series 11/8”

STAND-OFF BRACKETS (28.6)
• Material: 1/4” (6.3)
1
/2” (12.7)
• Standard Finishes: HDG, ZN, GRN
• For pipe or rigid conduit sizes
of 11/2” (32) and 2” (50) use with B501 Series ‘U’-Bolts
• For strut channels 15/8” (41.3) wide 15/16”
use with B500 Series Square ‘U’-Bolts (33.3)
• Hardware is not included

(55.6)
23/16”
(55.6)

(6) Slots
Part No. A Wt./C
In. (mm) Lbs. kg

B408SLBVNS 31/2” (88.9) 189 (85.7)

B408SLBVNS1 3” (76.2) 220 (99.8)
B408SLBVNS2 2” (50.8) 236 (107.0)
 /16”
7
(11.1) x 11/8” (28.6)
Reference page 72 for general fitting and standard finish specifications.
111

Strut Systems
Strut Fittings
GRY), Green (GRN)

43/8” 21/8”
(111.1) (53.5)
23/16” A

45/8”
(117.5
)

21/4”
(57.1)
(55.6) 11/16”
23/16” (27.0)
(55.6) 16”
1/
1
 21/4” (27.0)
nish specifications. (57.1)
 Our beam attachments and pipe supports offered in this section are designed to provide supports wit
complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for u
offer many installation advantages.
Materials & Finishes (Unless otherwise noted)
Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips,
Beam Clamps

Finish
Code Finish Specification

PLN Plain ASTM A1018 Gr. 33

ASTM A1011 SS Grade 33
ZN Electro-Plated Zinc ASTM B633 SC3 Type III or
ASTM A653
GRN DURA-GREEN™
– Malleable Iron ASTM A47 Gr. 32510
HDG Hot-Dipped Galvanized ASTM A123
CZ Chromium Zinc ASTM F1136
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240
AL Aluminum ASTM B209
Note: A minimum order may apply on special material and finishes.
Load Data
The load data published includes a safety factor
of 5.0 unless noted (safety factor = ratio of ultimate load to the design load).
Recommended Torque For Setscrews (unless noted)

Setscrew Size 1
/4”-20 3
/8”-16 1
/2”-13
Foot/Lbs. 4 5 11
Nm 5 7 15
Setscrew Size 5
/8”-11 3
/4”-10
Foot/Lbs. 21 34
Nm 28 46
See chart on page 72 for bolt torque.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

112
gned to provide supports without drilling or welding. A
cessories are designed for use with B-Line channels and

from low carbon steel strips, plates or rod unless noted.

ad).

ensions are in millimeters.

Strut Systems
 B351L D
STEEL C-CLAMP WITH LOCKNUT Max. Flange
Thickness
• Safety Factor of 5
• Setscrew and locknut included B
• When Retaining Strap is required, order B3362, B3363 or
B3365 separately
• Standard finishes: ZN, SS4, PLN

E
Rod Size
C A
Beam Clamps

Part Number Rod Size

With Locknut A B C D E Design Load Wt./C
Lbs. kg Lbs. kg

B351L-3/8 * 3
/8”-16 23/8” (60.3) 23/8” (60.3) 3
/4” (19.0) 13/8” (34.9) 230 (1.03) 41 (18.6)
B351L-1/2 * 1
/2”-13 23/8” (60.3) 23/8” (60.3) 3
/4” (19.0) 13/8” (34.9) 380 (1.71) 41 (18.6)
B351L-5/8 * 5
/8”11 23/8” (60.3) 21/4” (57.1) 3
/4” (19.0) 13/8” (34.9) 550 (2.47) 60 (27.2)
B351L-3/4 * 3
/4”-10 23/8” (60.3) 31/4” (82.5) 3
/4” (19.0) 13/8” (34.9) 630 (2.83) 71 (32.2)
B351L-7/8 7
/8”-9 3” (76.2) 31/4” (82.5) 1” (25.4) 17/8” (47.6) 1200 (5.34) 184 (83.4)

B3036L
C-CLAMP WITH LOCKNUT
• Safety Factor of 5
• When Retaining Strap is required, order B3363 or B3364 separately
• Setscrew and locknut included
• Material: Malleable iron
• Standard finishes: ZN, PLN

ROD SIZE
A
Part Number With Rod Size A
Locknut B C Design Load Wt./C
Lbs. kg Lbs. kg

B3036L-3/8 3
/8”-16 13/4” (44.4) 13/4” (44.4) 300 (0.89) 29 (13.1)
B3036L-1/2 1
/2”-13 13/4” (44.4) 13/4” (44.4) 380 (1.69) 28 (12.7)
B3036L-5/8 5
/8”-11 2” (50.8) 17/8” (47.6) 530 (2.36) 55 (24.9)
B3036L-3/4 3
/4”-10 2” (50.8) 2” (50.8) 530 (2.36) 72 (32.6)

B3362 THRU B3365 3/4”

RETAINING STRAP (19.
• *When ordering specify L (Length) as a B 0)
suffix to the part number
• Material: 14 Gauge (1.9)
• Standard finishes: GALV, SS4
L
Wt./C for Length L of
Part No. A B For Use With
Part No. 6” (152.4) 8” (203.2) 10” (254.0) 12” (304.8) A B For Use
A With
Lbs. kg Lbs. kg Lbs. kg Lbs. kg
B3362* 17 (7.7) 24 (10.9) 31 (14.0) 38 (17.2) 11/4” (31.7)/16”
7 (11.1) B351-3/8 & 1/2
B3363* 16 (7.2) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 5
/8” (15.9) B351-5/8 & 3/4 B3036-3/8 & 1/2
B3364* 16 (7.2) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 11/16” (17.4) B3036-5/8 & 3/4
B3365* 21 (9.5) 29 (13.1) 37 (16.8) 46 (20.8) 11/2” (38.1) 3
/4” (19.0) B351-7/8
*See note above.
Reference page 112 for general fitting and standard finish specifica
Strut Systems 113
 *
3
/8 Thru 3/4
Sizes Only

od Size
A

3
/4” (19.0)
Max. Flange Thickness

B
OD SIZE
A

or Use With
or Use With

& 1/2
& 3/4 B3036-3/8 & 1/2
& 3/4

d standard finish specifications.

 B3033
REVERSIBLE WIDE JAW WEDGE C-CLAMP C

(MALLEABLE IRON) D

• Safety Factor of 5
Beam Clamps

• Setscrew and locknut included Throat Openings

• Material: Malleable iron 11/4” (31.7) For
• Standard finishes: ZN, PLN 3
/8 & 1/2 Sizes
15/16” (33.3) For
5
/8 & 3/4 Sizes

Throat Opening
Rod Design Load Wt./C UL Max.
Part No. Size A B C D Lbs. kN Lbs. kg Pipe Size
B3033-3/8 3
/8”-16 2 /4” (57.1)
1
2” (50.8) 11/8” (28.6) 500 (2.22) 46 (20.8) 4” (100)
B3033-1/2 1
/2”-13 2 /16”
5 (58.7) 2 /16” (55.5) 11/4”
3 (31.7) 810 (3.60) 64 (29.0) 8” (200)
B3033-5/8 5
/8”-11 2 /8” (66.7) 21/2” (63.5) 13/8”
5 (34.9) 1000 (4.48) 116 (52.6) 8” (200)
B3033-3/4 3
/4”-10 2 /16” (68.3) 21/2” (63.5) 17/16”
11 (36.5) 1400 (6.22) 140 (63.5) 10” (250)

B3034
WEDGE C-CLAMP
• Safety Factor of 5 Note:
• 3
/4” (19.0) Max. Flange Thickness /8” & 1/2” Sizes
3

• Setscrew and locknut included Are Reversible

*
• Material: Malleable iron Style 3
/8 & 1/2
• Standard finishes: ZN, PLN Sizes Only
3
/4” (19.0) Max.
Flange Thickness

Rod Design Load Wt./C UL Max.

Part No. Size A B C D Lbs. kN Lbs. kg Pipe Size
B3034-3/8* 3
/8”-16 15/8” (41.3) 2” (50.8) /8” (22.2) 560
7 (2.49) 54 (24.5) 4” (100)
B3034-1/2* 1
/2”-13 113/16” (46.0) 2 /16”
3 (55.5) 1 /16” (30.2) 810 (3.60)
3
51 (23.1) 8” (200)
B3034-5/8 5
/8”-11 13/4” (44.5) 21/8” (54.0) 11/8” (28.6) 1000 (4.48) 70 (31.7) -- --
B3034-3/4 3
/4”-10 2” (50.8) 21/4” 57.2 11/8” (28.6) 1500 (6.67) 98 (44.4) -- --
Fig. 65XT Rod Size 11/16”
REVERSIBLE C-TYPE BEAM CLAMP
3
/8”-16 (27.0)
• Safety Factor of 5
3
/4” (19.0) Max.
• 3
/4” (19.0) Max. Flange Thickness Flange Thickness
• Setscrew and locknut included
• Maximum Pipe Size 4” (100)
• Design Load 610 Lbs. (2.71kN)
• Material: Steel
• Standard finishes: ZN, PLN

11/2”
(38.1)

Reference page 112 for general fitting and standard finish specifications.
114
 C

B
Rod Size
A

Throat Opening

C
D
B
Rod Size
A
11/16”
(27.0)

15/8”
(41.3)

7
/ 8” (22.2)

Strut Systems
 Fig. 69 (Formally B-Line B3367) RETAINING STRAP
• Specify ‘L’ lengths required
• Minimum recommended return on strap is 1” (25.4)
• Material: Pre-Galvanized Steel
• Standard finishes: GALV
Beam Clamps

Hole Dia. For Use Wt./C**

Part No. D With Lbs. kg

69-3/8-L 7
/16” (30.1) B3033-3/8 & B3034-3/8 23.9 (10.8)
65XT-3/8
69-1/2-L 9
/16” (30.1) B3033-1/2 & B3034-1/2 23.6 (10.7)
69-5/8-L 11
/16” (50.8) B3033-5/8 23.2 (10.5)
69-3/4-L 13
/16” (63.5) B3033-3/4 22.7 (10.3)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
Fig. 69R
RETROFIT RETAINING STRAP
• Specify ‘L’ lengths required
• Minimum recommended return on strap is 1” (25.4)
• Material: Pre-Galvanized Steel
• Standard finishes: GALV

Slot For Use Wt./C**

Part No. Width With Lbs. kg

69R-3/8-L 7
/16” (30.1) B3033-3/8 & B3034-3/8 22.9 (10.4)
65XT-3/8
69R-1/2-L 9
/16” (30.1) B3033-1/2 & B3034-1/2 22.6 (10.2)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.
B3037Z
Z-PURLIN C-CLAMP
• Design Load 500 Lbs. (2.22 kN)
• Safety Factor of 5
• Designed for attaching a 3/8”-16 hanger rod to the bottom flange of a Z-purlin
• Setscrew and locknut included
• Material: Malleable iron
• Standard finishes: ZN, PLN

Reference page 112 for general fitting and standard finish specific
Strut Systems 115
AINING STRAP

p is 1” (25.4)

11 /4
” L
(31.7
)

each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.

p is 1” (25.4) 11 /4
”
(31.7
)

each additional inch in strap length add 4.2 Lbs (1.9 kg) to Wt./C.

3”
r rod to the bottom flange of a Z-purlin
(76.
2)

313/32
”
Reference page 112 for general fitting and standard finish specifications.
(86.5)
115

Bottom
Hanger Rod
Threads 3/8”-
16
 B444
SERIES ROD SUPPORT
• Safety Factor of 5
• Max. Flange Thickness
3
/4” (19.0) for 1/4 & 5/16 sizes 1” (25.4) for 3/8
& 1/2 sizes
• Setscrew included
• Material: Malleable iron
• Standard finish: ZN
Available in HDG with CZ Hardware
BC442
LIGHT DUTY BEAM CLAMP
• Design Load 75 Lbs. (.33 kN)
• Safety Factor of 5
• 11
/16” (17.5) Max. Flange Thickness
• Setscrew included
• Holes tapped 1/4”-20 (Bottom & Back) D
• Material: 13 Gauge (2.3) C
• Standard finish: ZN 11
/16”
• Wt./C 13 Lbs. (3.9 kg) (17.5)

13/16

”
(20.6)

13 /4
”
(44.5
)
Beam Clamps

Thread Set Design Load Wt./C

Part No. Size A Screw C D Lbs. kN Lbs. kg

B444-1/4 1
/4”-20 1
/4”-20 13/8” (34.9) 13/16” (30.1) 150 (0.66) 24 (10.9)
B444-5/16 5
/16”-18 1
/4”-20 13/8” (34.9) 13/16” (30.1) 150 (0.66) 23 (10.4)
B444-3/8 3
/8”-16 1
/2”-13 17/8” (47.6) 2” (50.8) 350 (7.12) 65 (29.5)
B444-1/2 1
/2”-13 5
/8”-11 2 /8” (60.3) 21/2” (63.5) 1000 (4.45) 132 (59.9)
3

Reference page 112 for general fitting and standard finish specifications.
116
B210 B210A
BEAM CLAMP BEAM CLAMP
• Design Load • Design Load
800 Lbs. (3.56 kN) 300 Lbs. (1.33 kN)
• Safety Factor of 5 • Safety Factor of 5
• 5/8” (15.9) Max. Flange • 3/4” (19.0) Max. Flange
Thickness Thickness
• 1/2”-13 Setscrew included • 3/8”-16 Setscrew included
• Standard finish: ZN • Standard finish: ZN
• Wt./C 100 Lbs.5/8(45.3 kg)
” (15.9) • Wt./C 60 Lbs. (27.2 kg)
Max. 3 /8 / ” (19.0)
3 4

Flange Max.
Thickness ” Flange
(9.5 Thickness
)

3/4”

1/2”- (19.
0) 3/8”-
13
TAP 16
2” TAP
Botto
(50. 11 /2
m Botto
8)
Plate ” m
Only (38.1 Plate
) Only
 A
(Bottom & Back)

tions.
Strut Systems
 1/
4”
(6.3
)

1/2”
(12.
7)

(38.
1)

2”
(50. 11 /2
8)
”
 B303 THRU B309 BEAM CLAMPS T
• Safety Factor of 5 Max. Flange Thickness
• Max. Flange Thickness 1/16” (1.6) thru 7/8” (22.2) C
• Setscrew included
• When Retaining Strap is required, order B312 separately
• Recommended Setscrew Torque: 3/8”-16 150 in-lbs. (16.9 N•m)
1
/2”-13 350 in-lbs. (39.5 N•m)
• Standard finishes: ZN, HDG
Beam Clamps

Rod Set Design Load Wt./C

Part No. Size A Screw C T Lbs. kN Lbs. kg

B303 1
/4”-20 3
/8”-16 25/16” (58.7) 11 Ga. (3.0) 400 (1.78) 72 (32.6)
B304 5
/16”-18 3
/8”-16 25/16” (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B305 3
/8”-16 3
/8”-16 25/16” (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)
B306 3
/8”-16 1
/2”-13 27/16” (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
B307 1
/2”-13 1
/2”-13 27/16” (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)
B308 1
/2”-13 1
/2”-13 29/16” (65.1) 1/4” (6.3) 1500 (6.67) 133 (60.3)
B309 5
/8”-11 1
/2”-13 29/16” (65.1) /4”
1 (6.3) 1500 (6.67) 133 (60.3)
A 21/2” (63.5)

B321 SERIES BEAM CLAMPS

• Safety Factor of 5
• 111/16” (42.8) Max. Flange Thickness
• Setscrew included
• When Retaining Strap is required, order B312 separately
• Recommended Setscrew Torque: 1/2”-13 350 in-lbs. (39.5 N•m) T
5
/8”-11 700 in-lbs. (79.0 N•m)
• Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3)
B321-4 and B321-5 3/8” (9.5)
• Standard finishes: ZN, HDG
C

111/16” (42.8)
Max. Flange
Thickness
Rod Design Load Wt./C
Part No. Size A Setscrew C T Lbs. kN Lbs. kg

B321-1 3
/8”-16 /2”-13
1
39/16” (92.1) 1
/4” (6.3) 1300 (5.78) 187 (84.8)
B321-2 1
/2”-13 /2”-13
1
3 /16”
9 (92.1) 1
/4” (6.3) 1400 (6.23) 186 (84.3)
 B321-3 5
/8”-11 1
/2”-13 39/16” (92.1) /4”
1 (6.3) 1600 (7.12) 185 (83.9)
B321-4 5
/8”-11 5
/8”-11 323/32” (94.4) 5
/16” (7.9) 1800 (8.00) 239 (108.4)
B321-5 3
/4”-10 5
/8”-11 323/32” (94.4) 5
/16” (7.9) 2000 (8.89) 238 (107.9)

B312 SERIES
RETAINING STRAP FOR USE WITH B303 THRU B309 AND B321 SERIES
• 3
/4” (19.0) Max. Flange Thickness
• For thicker beams, step up one flange width size
• Material: 14 Gauge (1.9)
• Standard finishes: GALV, HDG

For Flange Wt./C

Part No. Width A Lbs. kg

B312-6 6” (152.4) 9” (228.6) 22 (10.0)

B312-9 9” (228.6) 12” (304.8) 30 (13.6)
B312-12 12” (304.8) 15” (381.0) 40 (18.1)
B312-15 15” (381.0) 18” (457.2) 49 (22.2)

11/4”
(31.7)

Reference page 112 for general fitting and standard finish specifica
Strut Systems 117
e Thickness

11/8”
(28.6)

A 21/2” (63.5)

15 /8
”
(41.3
)

31 /4
”
(82.5
A)
 A 13/4”
1
/ 4” (44.4)
(6.3) 1
/2” (12.7)

nd standard finish specifications.

B751 B752
BEAM CLAMP BEAM CLAMP SWIVEL
• Safety Factor of 5 • Design Load 500 Lbs. (2.22 kN)
• 3
/4” (19.0) Max. Flange Thickness • Safety Factor of 5
• Setscrew and Locknut included • Material: 12 Gauge (2.6)
• Maximum ATR Size 1/2” • Use B753 Swivel Nut (not included)
• Use B753 Swivel Nut (not included) • Includes:
B751 Clamp (Not
• Material: 12 Gauge (2.6) 1 pc. B752 Swivel Body Included)

• Standard finish: ZN, HDG 1 pc. 5/16”-18 x 13/4” HHCS

• Wt./C 42 Lbs. (19.0 kg) 1 pc. 5/16”-18 Hex Nut
2” 1” • Standard finish: ZN
(50.8) (25.4) • Wt./C 30 Lbs. (13.6 kg)
3” Overall
(76.2) Height 31/4” (82.5)
Design Load 300 Lbs. (1.33 kN) For Rod Sizes
Design Load 500 Lbs. (2.22 kN) 1
/4” (6.3) to 1/2” (12.7)
Beam Clamps

B751-J_-3/8
BEAM CLAMP ASSEMBLY
• Includes:
1 pc. B751 Beam Clamp
1 pc. B701 Type J-Hook only 1 pc. SA203-158 Clip
1 pc. 3/8”-16 Hex Nut B701-J_-3/8 J-Hook
• 1/4” (6.3) Diameter J-Hook available upon request Part
Number changes to B751-J_-1/4 and a 1/4-20 Machine Square
Nut (MSQN) is used
• Use B753 Swivel Nut (not included) B751 Clamp
• Standard finishes: ZN
Part No. For Flange Width Wt./C
Lbs. kg

B751-J4-3/8 3”-6” (76.2-152.4) 70 (31.7)

B751-J6- /8 3
5”-9” (127.0-228.6) 78 (35.4)
B751-J9-3/8 8”-12” (203.2-304.8) 83 (37.6)
B751-J12-3/8 11”-15” (279.4-381.0) 88 (39.9)
B753 B701 SERIES
SWIVEL NUT J-HOOK
• Provides a full swivel of 15° in any • 1/4” (6.3) Diameter J-Hook available upon request Part Number changes to B751-J_-1/4
direction Specify rod size and a 1/4-20 Machine Square Nut (MSQN) is used
• Standard finish: ZN • Standard finish: ZN
B701-J_-3/8 J-Hook Only
SA203-158 Clip
A TL
/8”-16 Hex Nut
3

Thread Length Wt./C

Part No. A TL Lbs. kg
For Wt./C B701-J4-3/8 83/4” (222.2) 51/2” (139.7) 26 (11.8)
Part No. Rod Size Lbs. kg
B701-J6- /83
11 /4” 3
(298.4) 6 /2” (165.1)
1
34 (15.4)
B753-3/8 3
/8”-16 4.0 (1.8) B701-J9-3/8 143/4” (374.6) 61/2” (165.1) 41 (18.6)
B753-1/2 1
/2”-13 3.4 (1.5) B701-J12-3/8 173/4” (450.8) 61/2” (165.1) 48 (21.8)

Reference page 112 for general fitting and standard finish specifications.
118
 B752
BEAM CLAMP SWIVEL
• Design Load 500 Lbs. (2.22 kN)
• Safety Factor of 5
• Material: 12 Gauge (2.6)
• Use B753 Swivel Nut (not included)
• Includes:
B751 Clamp (Not
1 pc. B752 Swivel Body Included)

1 pc. 5/16”-18 x 13/4” HHCS

1 pc. 5/16”-18 Hex Nut
• Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg)
Overall
Height 31/4” (82.5)
For Rod Sizes
1
/4” (6.3) to 1/2” (12.7)

B701-J_-3/8 J-Hook

B751 Clamp
upon request Part Number changes to B751-J_-1/4
QN) is used

TL Lbs. kg
2.2) 51/2” (139.7) 26 (11.8)
(298.4) 6 /2” (165.1)
1
34 (15.4)
4.6) 61/2” (165.1) 41 (18.6)
(450.8) 61/2” (165.1) 48 (21.8)

d finish specifications.
Strut Systems
 B755 B756-3/8
3
/8 BEAM CLAMP SWING CONNECTOR
• Safety Factor of 5 • Design Load 150 Lbs. (0.66 kN)
• 5/8” (15.9) Max. Flange Thickness 3/8”-16 Square • Safety Factor of 5
• For 3/8”-16 Hanger Rod only Machine Nuts • Material: 12 Gauge (2.6)
• Material: 12 Gauge (2.6) • Includes: B755 Clamp (Not Includ

• Includes: 1” 1 pc. B756-3/8 Swing Connector Body

1 pc. B755 Beam Clamp (25.4) 1 pc. 5/16”-18 x 11/4” SHHMS
1 pc. 3/8” x 2” Square Head 1 pc. 5/16”-18 Square Nut
Set Screw • Use B753 Swivel Nut (not included)
2 pcs. 3/8” Square Nut 21/2”
• Standard finish: ZN
• Standard finish: ZN (60.3)
• Wt./C 15 Lbs. (6.8 kg)
• Wt./C 30 Lbs. (13.6 kg) Overall Height 17/8” (47.6)
3
/8” (9.5) Hole
For Swing 7/8”
Connector
3
/8”-16 ROD (22.2)

Design Load Design Load

150 Lbs. (0.66 kN) 300 Lbs. (1.33 kN)
Beam Clamps

B755-3/8-J_
BEAM CLAMP ASSEMBLY
• Includes:
B755
1 pc. B755-3/8 Beam Clamp 1 pc. B705 Type J-Hook only 1 pc. B705 Clip
1 pc. 1/4”-20 Square Nut Clamp
• Standard finish: ZN

Wt./C
Part No. For Flange Width Lbs. kg

B755-3/8-J4 4”-6” (101.6-152.4) 47 (21.3)

B755-3/8-J6 6”-10” (152.4-254.0) 51 (23.1)
B705
B755-3/8-J10 10”-12” (254.0-304.8) 53 (24.0)
Clip
B755-3/8-J12 12”-14” (304.8-355.6) 55 (24.9)

B702 B705 SERIES

CLEAT J-HOOK
• To eliminate the swiveling of the rod • Use with B755-3/8 B705-J_

when required, use the B702 Cleat and • Standard finish: ZN J-Hook Only

a locking nut. This can be used with the B705 Clip

A
B751 Beam Clamp, B752 Swivel or 1
/4”-20
B756 Swing Connector. Machine Nut
• Material: 12 Gauge (2.6) TL
• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)
17/32”
(30.9)
1”
(25.4)
13
/32” (10.3)
Dia. Hole
• Material: 12 Gauge (2.6)
• Standard finish: ZN
• Wt./C 6 Lbs. (2.7 kg)
17/32”
(30.9)
1” Thread Length Wt./C
(25.4) Part No. A TL Lbs. kg
13
/32” (10.3)
Dia. Hole B705-J4 7 /8”
3
(187.3) 3” (76.2) 17 (7.7)
B705-J6 113/8” (288.9) 41/2” (114.3) 21 (9.5)
B705-J10 133/8” (339.7) 41/2” (114.3) 23 (10.4)
B705-J12 15 /8”
3
(390.5) 4 /2” (114.3)
1
25 (11.3)

Reference page 112 for general fitting and standard finish specific
Strut Systems 119
 NNECTOR
oad 150 Lbs. (0.66 kN)
ctor of 5
12 Gauge (2.6)
B755 Clamp (Not Includ

3
/8 Swing Connector Body
18 x 11/4” SHHMS
18 Square Nut
Swivel Nut (not included)
finish: ZN
Lbs. (6.8 kg)
ht 17/8” (47.6)

ed)

705 Clip

B705-J_
J-Hook
Only

B705 SERIES
J-HOOK
5-3/8 B705-J_

h: ZN J-Hook Only

B705 Clip
A 1
/4”-20
Machine Nut
TL
 TL Lbs. kg

187.3) 3” (76.2) 17 (7.7)

(288.9) 41/2” (114.3) 21 (9.5)
339.7) 41/2” (114.3) 23 (10.4)
(390.5) 41/2” (114.3) 25 (11.3)

112 for general fitting and standard finish specifications.

119
 B750 SERIES
BEAM CLAMP
• Safety Factor of 5
• Design Load 500 Lbs. (2.22 kN)
• Recommended Torque:
J-Hook Nut 125 in-lbs. (14.1 N•m)
• Maximum Flange Thickness 5/8” (15.9)
• Standard finish: ZN
B700 SERIES
J-HOOK
• Includes:
1 pc. J-Bolt 1
1 pc. Hex Nut 5

• Maximum Flange Thickness 5/8” (15.9) /

• Standard finish: ZN 8
”
(
4
1
.
3
)
Beam Clamps

7 Ga
(4.6)
Wt./C
Part No. For Flange Width Lbs. kg

B750-J4 3”-6” (76.2-152.4) 109 (49.4)

B750-J6 5”-9” (127.0-228.6) 124 (56.2)

B750-J9 8”-12” (203.2-304.8) 135 (61.2)
B750-J12 11”-15” (279.4-381.0) 147 (66.7)
Thread Length Wt./C
Part No. A TL Lbs. kg

B700-J4 8 /2”
1 (215.9) 6 /4”3 (171.4) 44 (19.9)
B700-J6 111/2” (292.1) 93/4” (247.6) 53 (24.0)
B700-J9 141/2” (368.3) 123/4” (323.8) 63 (28.6)
B700-J12 171/2” (444.5) 153/4” (400.0) 78 (35.4)
 B500 SERIES
SQUARE U-BOLT
• Includes:
1 pc. U-Bolt only
2 pcs. 3/8”-16 Hex Nuts
• Additional sizes available
• Standard finish: ZN, SS4 121/32
21/2” ”
(63.5) (42.1)

3
/8”-16
Threads
Channel Wt./C
Part No. A Size Lbs. kg

B500-3-3/8 33/8” (85.7) 15/8” x 15/8” 25 (11.3)

B500-5 5” (127.0) 31/4” x 15/8” 33 (14.9)
Reference page 112 for general fitting and standard finish specifications.
120
 1
/2”-13 Rod & Hex
Nut Sold Separately
127/32”
(46.8)
1
/2”-13

Thread
s

TL
A
3
/8”-16
Threads

Strut Systems
B441-22 B441-22A
BEAM CLAMP BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) • Design Load 1200 Lbs. (5.34 kN)
when used in pairs when used in pairs
• Safety Factor of 5 • Safety Factor of 5
• 3/4” (19.0) Max. Flange Thickness • 3/4” (19.0) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3) • For use with 15/8” (41.3) to 31/4” (82.5)
high channel high channel
• Recommended Torque: 150 in-lbs. (16.9 • Recommended Torque: 150 in-lbs. (16.9
N•m) N•m)
• Sold in pieces • Sold in pieces
• Other flange thickness variations are • Other flange thickness variations are
available, contact B-Line Engineering for available, contact B-Line Engineering for
sizes sizes
• Standard finishes: ZN, HDG, SS4 • Standard finishes: ZN, HDG, SS4
• Wt./C 87 Lbs. (39.4 kg) • Wt./C 93 Lbs. (42.2 kg)
3”
23/8” 3” 23/8”

(76.2) (60.3) (76.2) (60.3)

33/8” 1” 1”
(85.7) (25.4) (25.4)
1
/4” (6.3) 5”
(127.0)
1
/4” (6.3)
B441Z-22 B441Z-22A
BEAM CLAMP BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) • Design Load 1200 Lbs. (5.34 kN)
when used in series when used in series
• Safety Factor of 5 • Safety Factor of 5
• Sold in pieces • Sold in pieces
• For use with 13/16” (20.6) to 15/8” (41.3) • For use with 15/8” (41.3) to 31/4” (82.5)
high channel high channel
• Recommended Torque: • Recommended Torque: 150 in-lbs. (16.9 N•m)
150 in-lbs. (16.9 N•m) • Standard finishes: ZN
• Standard finishes: ZN • Wt./C 101 Lbs. (45.8 kg)
• Wt./C 95 Lbs. (43.1 kg) 1”
1” (25.4)
(25.4) 3”
3” (76.2)
(76.2) 45/8”
1
/4” (6.3) 1/4” (117.5)
45/8” (6.3)
(117.5) 43/8”
23/4” (111.1)
(69.9)
Beam Clamps

Reference page 112 for general fitting and standard finish specifi
Strut Systems 121
B314
BEAM CLAMP
• Design Load 900 Lbs. (4.00 kN)
when used in pairs
• Safety Factor of 5
• 5/8” (15.9) Max. Flange Thickness
• For use with channel 15/8” (41.3)
in height
• Setscrew included
• Sold in pieces
• Standard finishes: ZN, GRN, HDG, SS4
• Wt./C 105 Lbs. (47.6 kg)
13/4”
37/16”
(44.4) 13/ ”
1/4” (87.3) 4

(6.3) (44.4)
 B441Z-22A
BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN)
when used in series
• Safety Factor of 5
• Sold in pieces
• For use with 15/8” (41.3) to 31/4” (82.5)
high channel
Recommended Torque: 150 in-lbs. (16.9 N•m)
• Standard finishes: ZN
• Wt./C 101 Lbs. (45.8 kg)
1”
(25.4)
3”
(76.2)
45/8”
1/4” (117.5)
(6.3)
43/8”
(111.1)

112 for general fitting and standard finish specifications.

121
B211 B213
ZEE BEAM CLAMP I-BEAM CLAMP
• Design Load 600 Lbs. (2.67 kN)
when used in pairs • Design Load 900 Lbs. (4.00 kN)
• Safety Factor of 5 when used in pairs
• 1” (25.4) Max. Flange Thickness • Safety Factor of 5
• 1/2”-13 Setscrew included • 7/8” (22.2) Max. Flange Thickness
• Sold in pieces
• 1/2”-13 Setscrew included
• Order 1/2”-13 HHCS and Channel
Nut separately • Sold in pieces
• Standard finishes: ZN, HDG • Order 1/2”-13 x 21/4” HHCS and
• Wt./C 66 Lbs. (29.9 kg) Channel Nut separately
• Material: Malleable iron
11/2” • Standard finishes: ZN, GRN
(38.1) • Wt./C 95 Lbs. (43.1 kg)
3
/ 8” (9.5)

31/4”
(82.5)

B355 B212-1/4
BEAM CLAMP I-BEAM CLAMP
• Design Load 1200 Lbs. (5.34 kN) • Design Load 600 Lbs. (2.67 kN)
when used in pairs when used in pairs
• Safety Factor of 5 • Safety Factor of 5
• 5/8” (15.9) Max. Flange Thickness • 7/8” (22.2) Max. Flange Thickness
• Sold in pieces • 3/8”-16 Setscrew included
• Order 1/2”-13 x 11/2” HHCS and Channel Nut separately • Sold in pieces
• Standard finishes: ZN, GRN, HDG, SS4 • Standard finish: ZN
• Wt./C 30 Lbs. (13.6 kg) 15/8” • Wt./C 41 Lbs. (18.6 kg)
(41.3) 7
/8 ” (22.2)
5
/8” (15.9) I.D.
/4 ”
1
Thick
127/32” (6.3)
(46.8) 2”
1
/4” (6.3) (50.8)
11/4”
(31.7)

B212-3/8 B435
I-BEAM CLAMP BEAM CLAMP
• Design Load 1000 Lbs. (4.45 kN)
when used in pairs • Design Load 900 Lbs. (4.00 kN)
• Safety Factor of 5 when used in pairs
• 11/8” (28.6) Max. Flange Thickness • Safety Factor of 5
• 1/2”-13 Setscrew included • 21/8” (54.0) Max. Flange Thickness
• Sold in pieces
• 1/2”-13 x 2” Setscrew included
• Standard finishes: ZN, HDG
• Wt./C 62 Lbs. (28.1 kg) • Sold in pieces
11/4” (31.7) I.D. • Standard finish: ZN
3
/8” THICK • Wt./C 82 Lbs. (37.2 kg)
(9.5)
2”
11/4”
(50.8)
(31.7)
• Standard finishes: ZN, HDG
• Wt./C 62 Lbs. (28.1 kg)
11/4” (31.7) I.D.
3
/8” THICK
(9.5)
2”
11/4”
(50.8)
(31.7) 3
/ 8” (9.5)

2”
(50.8)
Beam Clamps

Reference page 112 for general fitting and standard finish specifications.
122
 11/2”
(38.1)

21/2”
(63.5)

67 kN)

hickness
d
 11/4”
(31.7)

27/8”
(73.0)

tions.
Strut Systems
B427 B405 B405A
BEAM CLAMP SUSPENSION MEMBER SUSPENSION MEMBER WITH BEAM
• Design Load 1100 Lbs. (4.89 kN) • Standard finishes: ZN, GRN CLAMP
when used in pairs • Wt./C 75 Lbs. (34.0 kg) • 7/8” (22.2) Max. Flange Thickness
• Safety Factor of 5 1/ ” 37/8” • Includes:
• 21/2” (63.5) Max. Flange Thickness 4
(87.3) O.D. 1 pc. B405 Suspension Member 1 pc.
without channel (6.3) B213 I-Beam Clamp
• 1/2”-13 x 11/2” Setscrew included 111/16” (42.9) I.D. 1 pc. 1/2”-13 x 21/2” HHCS
• Sold in pieces 17/8” (47.6) O.D. 1 pc. 1/2”-13 Hex Nut
• Standard finish: ZN • Material: Malleable iron
• Wt./C 92 Lbs. (41.7 kg) • Standard finishes: ZN, GRN
10° • Wt./C 183 Lbs. (83.0 kg)
2 Holes 37/16”
27/8” 9
/16” (14.3) (87.3)
(73.0) DIA.
111/16”
2”
11/2”
17/8” (42.9)
3
/8”
(50.8)
(38.1) (47.6)
(9.5)
Beam Clamps

B318 THRU B320

BEAM CLAMP ASSEMBLY
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B333 Slotted U-Support 2 pcs. B213 I-Beam Clamp
B
2 pcs. 1/2”-13 x 21/2” HHCS A
2 pcs. 1/2”-13 Hex Nuts
• Material: Malleable iron
• Standard finishes: ZN, GRN

Design Load Wt./C

Part No. A For Flange Width B Lbs. kN Lbs. kg

B318 71/4” (184.1) 23/8”-41/2” (60.3-114.3) 1200 (5.34) 325 (147.4)

B319 81/2” (215.9) 33/4”-53/4” (95.2-146.0) 800 (3.56) 340 (154.2)
B320 103/8” (263.5) 55/8”-75/8” (142.9-193.7) 560 (2.49) 357 (161.9)
 B602A THRU B602C
BEAM CLAMP WITH GUSSET ASSEMBLY
• Safety Factor of 5
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B451 Slotted Three Hole U Support with Gusset 2 pcs. B213 I-Beam Clamp
2 pcs. 1/2”-13 x 21/2” HHCS
2 pcs. 1/2”-13 Hex Nuts
• Material: Malleable iron
• Standard finishes: ZN, GRN

Design Load Wt./C

Part No. A For Flange Width B Lbs. kN Lbs. kg

B602A 71/4” (184.1) 23/8”-41/2” (60.3-114.3) 1200 (5.34) 365 (165.1)

B602B 81/2” (215.9) 33/4”-53/4” (95.2-146.0) 1200 (5.34) 383 (173.7)
B602C 103/8” (263.5) 55/8”-75/8” (142.9-193.7) 1200 (5.34) 408 (185.0)
Reference page 112 for general fitting and standard finish specific
Strut Systems 123
B405A
SUSPENSION MEMBER WITH BEAM
CLAMP
• 7/8” (22.2) Max. Flange Thickness
• Includes:
1 pc. B405 Suspension Member 1 pc.
B213 I-Beam Clamp
1 pc. 1/2”-13 x 21/2” HHCS
1 pc. 1/2”-13 Hex Nut
• Material: Malleable iron
• Standard finishes: ZN, GRN
• Wt./C 183 Lbs. (83.0 kg)
37/16”
(87.3)
111/16”
17/8” (42.9)
(47.6)

1 /4

”
(6.3
1
) 5 /8
”
(41.3
)
 1 /4

I-Beam Clamp
”
(6.3
1) 3/4
B ”
(44.4
A )

for general fitting and standard finish specifications.

123
 B760-22 SERIES B760-22A SERIES
BEAM CLAMP BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • 1” (25.4) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3) • For use with 15/8” (41.3) to 31/4” (82.5)
high channel high channel
• Recommended Torques: • Recommended Torques: 5” U-Bolt Nuts 150 in-
U-Bolt Nuts 150 in-lbs. (16.9 N•m) (16.9 N•m) (127.0) J-Hook Nut 60 in-lbs. (6.8 N•m)

J-Hook Nut 60 in-lbs. (6.8 N•m) 33/8” • Includes:

• Includes: (85.7)
1 pc. B760 Plate 1 pc. B701 Type
1 pc. B760 Plate 1 pc. B701 Type J-Hook only 1 pc. B500-5”
J-Hook only 1 pc. B500-33/8” U-Bolt only
U-Bolt only 3 pcs. 3/8”-16 Hex Nuts 1/4”

3 pcs. 3/8”-16 Hex Nuts 1/4” • Standard finish: ZN (6.3)

• Standard finish: ZN (6.3) 3”

3” (76.2)
(76.2) 3
/8” (9.5) Dia.
/8 ”
3
(9.5) Dia. J-Hook and Hex Nut
J-Hook and Hex Nut

B761-22 SERIES B761-22A SERIES

BEAM CLAMP BEAM CLAMP
• 1” (25.4) Max. Flange Thickness • 1” (25.4) Max. Flange Thickness
• For use with 13/16” (20.6) to 15/8” (41.3) • For use with 15/8” (41.3) to 31/4” (82.5)
high channel high channel
• Recommended Torques: • Recommended Torques:
U-Bolt Nuts 150 in-lbs. (16.9 N•m) U-Bolt Nuts 150 in-lbs. (16.9 N•m)
ATR Nuts 60 in-lbs. (6.8 N•m) ATR Nuts 60 in-lbs. (6.8 N•m) 5”

• Includes: • Includes: (127.0)

33/8”
2 pcs. B700 Plates 2 pcs. B500-33/8” U-Bolts 2 pcs. B700 Plates
only (85.7) 1 pc. 3/8”-16 ATR (Length) 2 pcs. B500-5” U-Bolts only 1 pc. 3/8”-16 ATR (Length)
6 pcs. 3/8”-16 Hex Nuts 6 pcs. 3/8”-16 Hex Nuts 1/4”
• Standard finish: ZN • Standard finish: ZN (6.3)
1
/ 4” (6.3)
3”
/8”-16 (9.5) ATR
3

(76.2)
and Hex Nuts

(76.2)

ATR Wt./C ATR Wt./C

Part No. For Flange Width Length Lbs. kg Part No. For Flange Width Length Lbs. kg
B761-22-4 4”-5 /8” (101.6-149.2) 4”
7
(101.6) 202 (91.6) B761-22A-4 4”-5 /8” (101.6-149.2) 4”
7
(101.6) 216 (98
B761-22-6 6”-87/8” (152.4-225.4) 6” (152.4) 206 (93.4) B761-22A-6 6”-87/8” (152.4-225.4) 6” (152.4) 220 (99
B761-22-9 9”-117/8” (228.6-301.6) 9” (228.6) 214 (97.0) B761-22A-9 9”-117/8” (228.6-301.6) 9” (228.6) 228 (103
B761-22-12 12”-147/8”(304.8-377.8) 12” (304.8) 221 (100.2) B761-22A-12 12”-147/8” (304.8-377.8) 12” (304.8) 235 (10
Beam Clamps

Wt./C
Part No. For Flange Width Lbs. kg

B760-22-J4 4”-57/8” (101.6-149.2) 122 (55.3)

B760-22-J6 6”-87/8” (152.4-225.4) 129 (58.5)
B760-22-J9 9”-117/8” (228.6-301.6) 135 (61.2)
B760-22-J12 12”-147/8” (304.8-377.8) 141 (63.9)
Wt./C
Part No. For Flange Width Lbs. kg

B760-22A-J4 4”-5 /8”

7 (101.6-149.2) 129 (58.5)
B760-22A-J6 6”-87/8” (152.4-225.4) 136 (61.7)
B760-22A-J9 9”-117/8” (228.6-301.6) 142 (64.4)
B760-22A-J12 12”-14 /8”
7 (304.8-377.8) 148 (67.1)
Reference page 112 for general fitting and standard finish specifications.
124

3
”
 ERIES
AMP
nge Thickness
.3) to 31/4” (82.5)
nel
5” U-Bolt Nuts 150 in-lbs.
t 60 in-lbs. (6.8 N•m)
es:
pc. B701 Type
. B500-5”
nly
1/4”
Nuts
ZN (6.3)

Dia.
ex Nut

2.5)

5”
(127.0)

8”-16 ATR (Length)

3
/8”-16 (9.5) ATR
and Hex Nuts

Length Lbs. kg
2) 4” (101.6) 216 (98.0)
4) 6” 220 (99.8)
(152.4)
6) 9” (228.6) 228 (103.4)
8) 12” (304.8) 235 (106.6)
Strut Systems
 B614 B613 B613A
COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B22 COLUMN SUPPORT FOR B52
• Quick installation (one bolt to tighten) • Design Load 800 Lbs. (3.56 kN) Slip with • Design Load 800 Lbs. (3.56 kN) Slip
• Design Load 800 Lbs. (3.56 kN) Slip with Safety Factor of 3 with Safety Factor of 3
Safety Factor of 3 • Use with B22 and B24 Channel • Use with B52 and B54 Channel
• Use with B22 and B24 Channel • Setscrews to be torqued to 19 ft./Lbs • Setscrews to be torqued to 19 ft./L
• Sold in pairs • Sold in pairs • Sold in pairs
• Standard finish: ZN • Standard finishes: ZN, GRN, HDG • Standard finishes: ZN, GRN, HDG
• Wt./C 50 Lbs. (22.6 kg) • Wt./C 100 Lbs. (45.3 kg) • Wt./C 100 Lbs. (45.3 kg)
15/8”
1 / 8”
5
(41.3)
(41.3) 31/2”
(88.9)
3
/8” x 2” Cone Point Setscrews

31/2”

(88.9)
/8” x 2” Cone
3

Point
Setscrews
Beam Clamps

B422 SERIES
RIGHT ANGLE CLAMP
• Safety Factor of 5
• Material: 7 Gauge (4.5)
• Standard finishes: ZN, SS4

Design Load Vertical P

Design Load
Part No. Conduit Size A Vertical Pull Lbs. Wt./C
kg Lbs. kg

B422-1/2 /2”
1 (15) 23/8” (60.3) 250 (1.11) 38 (17.2)
B422-3/4 /4”
3 (20) 23/8” (60.3) 300 (1.33) 39 (17.7)
B422-1 1” (25) 27/8” (73.0) 400 (1.78) 48 (21.8)
B422-11/4 11/4” (32) 27/8” (73.0) 400 (1.78) 50 (22.7)
B422-11/2 11/2” (40) 31/4” (82.5) 500 (2.22) 59 (26.7)
B422-2 2 (50) 311/16” (93.7) 600 (2.67) 75 (34.0)
B422-21/2 21/2” (65) 41/4” (107.9) 700 (3.11) 98 (44.4)
B422-3 3” (80) 47/8” (123.8) 800 (3.56) 111 (50.3)
B422-31/2 31/2” (90) 57/16” (138.1) 900 (4.00) 123 (55.8)
B422-4 4” (100) 6” (152.4) 1000 (4.45) 135 (61.2)

B107S B593
U-SUPPORT CLEVIS SWIVEL
• Material: 7 Gauge (4.5) • Includes:
• Standard finishes: ZN, GRN 1 pc. 3/8”-16 x 2” HHCS
• Wt./C 51 Lbs. (23.1 kg) 1 pc. 3/8”-16 Hex Nut
33/4” • Material: 11 Gauge (3.0)
(95.2) • Standard finishes: ZN, GRN
• Wt./C 31 Lbs. (14.0 kg)

1” 13/8” 17/16”
(25.4) (34.9) (36.5)
• Illustration shows B107S and B593
used together
• Design Load 900 Lbs., strength of
7
/16” (11.1) Dia. assembly only
13/4” O.D. 4 Holes • Verify anchorage
(44.4) 9
/16” (14.3) Dia.

Reference page 112 for general fitting and standard finish specifica
Strut Systems 125
 B613A
COLUMN SUPPORT FOR B52
• Design Load 800 Lbs. (3.56 kN) Slip
with Safety Factor of 3
• Use with B52 and B54 Channel
Setscrews to be torqued to 19 ft./Lbs
• Sold in pairs
• Standard finishes: ZN, GRN, HDG
• Wt./C 100 Lbs. (45.3 kg)
15/8”
(41.3)
31/2”
(88.9)
3
/8” x 2” Cone Point Setscrews

U-Bolt and Hex

Nuts

Design Load Vertical Pull

 B593
CLEVIS SWIVEL
• Includes:
1 pc. 3/8”-16 x 2” HHCS
1 pc. 3/8”-16 Hex Nut
• Material: 11 Gauge (3.0)
• Standard finishes: ZN, GRN
• Wt./C 31 Lbs. (14.0 kg)

17/16”
(36.5)

21/2”
(63.5)
9
/16” (14.3) Dia.

11/4”
(31.7)
l fitting and standard finish specifications.
125
 Our beam attachments and pipe supports offered in this section are designed to provide supports wit
complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for u
offer many installation advantages.
Materials & Finishes*
Pipe clamps, pipe hangers, beam clamps, brackets, and rollers are made from low carbon steel strips,

Finish
Code Finish Specification

PLN Plain ASTM A1011

33,000 PSI min. yield
ZN Electro-Plated Zinc ASTM B633 SC3 Type III or
ASTM A653
GRN DURA-GREEN™
DCU DURA-COPPER™
HDG Hot-Dipped Galvanized ASTM A123
YZN Yellow Zinc Chromate ASTM B633 SC3 Type II
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240
AL Aluminum ASTM B209
Pipe/Conduit Clamps &
Hangers

*Unless otherwise noted.

Load Data
The load data published includes a safety factor of 5.0 unless noted (safety factor = ratio of ultimate
Recommended Torque For Setscrews (unless noted)

Setscrew Size 1
/4”-20 3
/8”-16 1
/2”-13
Foot/Lbs. 4 5 11
Nm 5 7 15
Setscrew Size 5
/8”-11 3
/4”-10
Foot/Lbs. 21 34
Nm 28 46
*See chart on page 72 for bolt torque.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

126
gned to provide supports without drilling or welding. A
cessories are designed for use with our channels and

from low carbon steel strips, plates or rod unless noted.

ty factor = ratio of ultimate load to the design load).

ensions are in millimeters.

Strut Systems
 B2207 THRU B2213
MULTI-GRIP PIPE CLAMPS FOR THINWALL (EMT), I.M.C., RIGID CONDUIT OR
PIPE
• Safety Factor of 5
Design Load 1
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: ASTM A1011 33,000 PSI min. yield
• Standard finish: ZN

Design Load 2
Hangers
Pipe/Conduit Clamps &

Nominal Material O.D. Size Range Alternate For Design Load 1 Design Load 2 Design Load 3
Part No. Size Thickness Clamp No.’s Lbs. kN Lbs. kg Lbs. kg

B2207 3 8
/ ” (10) 16 Ga. (1.5) .557-.706 (14.2- B2000, 400 (1.78) 50 (0.22) 50
17.9) B2001,
B2208 B2026
1 2
/ ” (15) 16 Ga. (1.5) .701-.875 (17.8- B2001, 400 (1.78) 50 (0.22) 50
22.2) B2008,
B2209 B2027, B2028
3/4” (20) 14 Ga. (1.9) .917-1.081 (23.2- B2002, 400 (1.78) 50 (0.22) 50
27.4) B2009,
B2210 1” (25) 14 Ga. (1.9) 1.125- (28.6- B2003, 400 (1.78) 50 (0.22) 50
1.375 34.9) B2010,
B2030,
B2211 11/4” (32) 14 Ga. (1.9) 1.500- (38.1- B2004,
B2031, 400 (1.78) 50 (0.22) 50
1.691 42.9) B2011,
B2033,
B2212 11/2” (40) 12 Ga. (2.6) 1.735- (44.0- B2005, B2034 600 (2.67) 75 (0.33) 75
1.931 49.0) B2012, B2035
B2213 2” (50) 12 Ga. (2.6) 2.192- (55.7- B2006, B2013 600 (2.67) 75 (0.33) 75
2.400 60.9) B2039
BPC-8 THRU BPC-64
BREAK-APART CONDUIT CLAMP
• Design Load 200 Lbs. (.896 kN)
• Includes Combination Recess Hex Head Machine Screw
• Material: ASTM A1011 33,000 PSI min. yield
• Standard finish: ZN

Design Load
 A
Part No. Rigid or EMT Conduit Wt./C
Size Lbs. kg

BPC-8 1
/2” (21.3) 11.2 (5.1)
BPC-12 3
/4” (26.7) 12.7 (5.8)
BPC-16 1” (33.4) 14.5 (6.6)
BPC-20 11/4” (42.2) 16.5 (7.5)
BPC-24 11/2” (48.3) 18.5 (8.4)
BPC-32 2” (60.3) 21.5 (9.8)
BPC-40 21/2” (73.0) 21.5 (9.8)
BPC-48 3” (88.9) 22.0 (10.0)
BPC-56 31/2” (101.6) 23.0 (10.4)
BPC-64 4” (114.3) 27.5 (12.5)
Reference page 126 for general fitting and standard finish specifica
Strut Systems 127
Design Load 1

Design Load 3

Design Load 3 Wt./C

Lbs. kg Lbs. kg

(0.22) 9 (4.1)

(0.22) 11 (5.0)

(0.22) 12 (5.4)

(0.22) 13 (5.9)

(0.22) 15 (6.8)

(0.33) 23 (10.4)

(0.33) 26 (11.8)

Design Load
and standard finish specifications.
 B2000 SERIES
PIPE AND CONDUIT CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI Design Load 1
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: ZN, HDG, SS4, SS6, AL
Note: For EMT sizes 21/2” and larger use rigid conduit sizes.

THINWALL CONDUIT (EMT) CLAMPS

Pipe/Conduit Clamps &
Hangers

Conduit Material Design Load 1 Design Load 2 Design Load 3 Wt./C

Part No. Size Thickness Lbs. kN Lbs. kg Lbs. kg Lbs. kg

B2000 3
/8” (10) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 10 (4.5)
B2001 1
/2” (15) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 10 (4.5)
B2002 3
/4” (20) 16 Ga. (1.9) 400 (1.78) 50 (0.22) 50 (0.22) 11 (5.0)
B2003 1” (25) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 16 (7.2)
B2004 11/4” (32) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 19 (8.6)
B2005 11/2” (40) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 28 (12.7)
B2006 2” (50) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 33 (14.9)
RIGID CONDUIT OR PIPE CLAMPS
Conduit Material Design Load 1 Design Load 2 Design Load 3 Wt./C
Part No. Size Thickness Lbs. kN Lbs. kg Lbs. kg Lbs. kg

B2001 3
/8” (10) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 10 (4.5)
B2008 1
/2” (15) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 11 (5.0)
B2009 3
/4” (20) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 15 (6.8)
B2010 1” (25) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 16 (7.2)
B2011 11/4” (32) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 20 (9.1)
B2012 11/2” (40) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 30 (13.6)
B2013 2” (50) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 34 (15.4)
B2014 21/2” (65) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 38 (17.2)
B2015 3” (80) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 44 (19.9)
B2016 31/2” (90) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 61 (27.6)
B2017 4” (100) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 66 (29.9)
B2018 41/2” (115) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 70 (31.7)
B2019 5” (125) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 77 (34.9)
B2020 6” (150) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 100 (45.3)
B2021 7” (175) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 115 (52.1)
B2022 8” (200) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 128 (58.0)
B2130 10 (254) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 160 (72.6)
B2132 12” (305) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 185 (83.9)
Reference page 126 for general fitting and standard finish specifications.
128
Design Load 1

Design Load 2
Design Load 3
ons.
Strut Systems
 B2000 SERIES Design Load 1
PVC CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: PVC

CLAMP SIZING CHART FOR PVC COATED RIGID Design Load 2

CONDUIT AND CLAMPS Design Loa

Conduit Coating
Nominal .020 (.51mm) .040 (1.01mm)
Conduit Clamp Coating Clamp Coating
Size
0 .020 0 .020 (.51mm)
/” 1 2 (15) B2008 (.51mm)
B2002 B2002 B2009
/” 3 4 (20) B2030 B2030 B2030 B2003
1” (25) B2032 B2010 B2010 B2004
11/4” (32) B2005 B2005 B2005 B2005
11/2” (40) B2012 B2037 B2037 B2037
2” (50) B2013 B2041 B2041 B2041
2 / ” (65)
1 2
B2014 B2045 B2045 B2045
3” (80) B2015 B2050 B2050 B2050
31/2” (90) B2016 B2054 B2054 B2054
4” (100) B2017 B2058 B2058 B2058
5” (125) B2019 B2066 B2066 B2066
6” (150) B2020 B2115 B2115 B2115
CLAMP SIZING CHART FOR PVC COATED THINWALL
CLAMPS
Conduit Coating
Nominal .020 (.51mm) .040 (1.01mm)
Conduit Clamp Coating Clamp Coating
Size
0 .020 0 .020 (.51mm)
/”
3 8 (10) B2026 (.51mm)
B2026 B2026 B2001
/”
1 2 (15) B2027 B2027 B2027 B2008
/”
3 4 (20) B2009 B2009 B2009 B2009
1” (25) B2003 B2031 B2031 B2031
11/4” (32) B2004 B2011 B2011 B2011
11/2” (40) B2005 B2005 B2005 B2012
2” (50) B2039 B2039 B2039 B2013
Hangers
Pipe/Conduit Clamps &
 *See B2000 O.D. pipe and conduit clamp chart on pgs. 130- *See B2000 O.D. pipe and conduit clamp ch
131 for corresponding clamp load data. corresponding clamp load
B2000 SERIES Design Load 1
COPPER TUBING CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Includes Combination Recess Hex Head Machine Screw and Square Nut
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finish: Exclusive DURA-COPPER™ Finish (DCU)

Design Load 2
COPPER TUBING CLAMPS
Part Tubing O.D. Size Material Design Load 1 Design Load 2 Design Load 3 Wt./C
No. Size In. (mm) Thickness Lbs. kN Lbs. kg Lbs. kg Lbs. kg

B2024DCU 1
/4” 0.375 (9.5) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 8
B2025DCU 3
/8” 0.500 (12.7) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 9
B2026DCU 1
/2” 0.625 (15.9) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 10
B2027DCU 5
/8” 0.750 (19.0) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 10
B2008DCU 3
/4” 0.875 (22.2) 16 Ga. (1.5) 400 (1.78) 50 (0.22) 50 (0.22) 11
B2030DCU 1” 1.125 (28.6) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 15
B2010DCU 11/4” 1.375 (34.9) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 17
B2011DCU 11/2” 1.625 (41.3) 14 Ga. (1.9) 600 (2.67) 75 (0.33) 75 (0.33) 19
B2038DCU 2 2.125 (54.0) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 32
B2042DCU 21/2” 2.625 (66.7) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 35
B2046DCU 3 3.125 (79.4) 12 Ga. (2.6) 800 (3.56) 125 (0.56) 125 (0.56) 39
B2050DCU 31/2” 3.625 (92.1) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 54
B2054DCU 4 4.125 (104.8) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 61
B2062DCU 5 5.125 (130.2) 11 Ga. (3.0) 1000 (4.45) 200 (0.89) 150 (0.67) 70
B2110DCU 6 6.125 (155.6) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 94
B2126DCU 8 8.125 (206.4) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (0.89) 123
Reference page 126 for general fitting and standard finish specifica
Strut Systems 129
 Design Load 1

Design Load 3

R PVC COATED THINWALL (EMT) CONDUIT AND

D. pipe and conduit clamp chart on pgs. 130-131 for
corresponding clamp load data.
Design Load 1

Design Load 3

Wt./C
Lbs. kg

(3.6)
(4.1)
(4.5)
(4.5)
(5.0)
(6.8)
(7.7)
(8.6)
(14.5)
(15.9)
(17.7)
(24.5)
(27.6)
(31.7)
(42.6)
(55.8)
and standard finish specifications.
 B2000 SERIES Design Load 1
O.D. PIPE AND CONDUIT CLAMPS
• Safety Factor of 5 D
e
• Add PA to suffix for pre-assembled pipe clamps s
• Other sizes available upon request i
• Includes Combination Recess Hex Head Machine Screw andO.D.
g
Square Nut. n
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6)
ASTM A1011 33,000 PSI min. yield and 11 Ga. (3.0) L
o
ASTM A1011HSLA Gr. 50 a
• Standard finishes: ZN, HDG, SS4 d
O.D. CLAMPS
2

Part No. O.D. Hardware Material Gauge Design Load 1 Design Load 2 Design Load 3
Size (in.) Size Thickness Lbs. kN Lbs. kN Lbs. kN

B2023 /4”
1 (6.3) /4”-20
1
16 (1.5) 120 (0.54) 30 (0.13) 30 (0.13)
B2024 /8”
3 (9.5) /4”-20
1
16 (1.5) 300 (1.33) 40 (0.18) 40 (0.18)
B2025 /2”
1 (12.7) /4”-20
1
16 (1.5) 400 (1.78) 50 (0.22) 50 (0.22)
B2026 5
/8” (15.9) 1
/4”-20 16 (1.5) 400 (1.78) 50 (0.22) 50 (0.22)
B2027 3
/4” (19.0) 1
/4”-20 16 (1.5) 400 (1.78) 50 (0.22) 50 (0.22)
B2008 7
/8” (22.2) 1
/4”-20 16 (1.5) 400 (1.78) 50 (0.22) 50 (0.22)
B2009 1” (25.4) /4”-20
1
14 (1.9) 500 (2.22) 75 (0.33) 75 (0.33)
B2030 11/8” (28.6) /4”-20
1
14 (1.9) 600 (2.67) 75 (0.33) 75 (0.33)
B2031 1 /4”1 (31.7) 1
/4”-20 14 (1.9) 600 (2.67) 75 (0.33) 75 (0.33)
B2010 13/8” (34.9) 1
/4”-20 14 (1.9) 600 (2.67) 75 (0.33) 75 (0.33)
B2004 11/2” (38.1) 1
/4”-20 14 (1.9) 600 (2.67) 75 (0.33) 75 (0.33)
B2011 15/8” (41.3) /4”-20
1
14 (1.9) 600 (2.67) 75 (0.33) 75 (0.33)
B2005 1 /4”3 (44.4) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2012 17/8” (47.6) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2037 2 (50.8) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2038 2 /8”1 (54.0) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2039 21/4” (57.1) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2013 23/8” (60.3) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2041 21/2” (63.5) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2042 25/8” (66.7) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2043 23/4” (69.8) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2014 27/8” (73.0) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2045 3 (76.2) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2046 31/8” (79.4) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2047 31/4” (82.5) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2048 33/8” (85.7) 5
/16”-18 12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2015 3 /2”1 (88.9) /16”-18
5
12 (2.6) 800 (3.56) 125 (0.56) 125 (0.56)
B2050 35/8” (92.1) /16”-18
5
11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2051 33/4” (95.2) /16”-18
5
11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2052 3 /8”7 (41.3) /16”-18
5
11 (3.0) 1000 4.45 200 (0.89) 150 (0.67)
B2016 4 (101.6) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2054 4 /8”1 (104.8) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2055 41/4” (107.9) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2056 43/8” (111.1) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2017 41/2” (114.3) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
 B2058
Pipe/Conduit Clamps & 45/8” (117.5) /16”-18
5
11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
Hangers

Reference page 126 for general fitting and standard finish specifications.
130
Design Load 1 O.D.
Design Load 3

Wt./C
Lbs. kg

8 (3.6)
8 (3.6)
9 (4.1)
10 (4.5)
10 (4.5)
11 (5.0)
15 (6.8)
15 (6.8)
16 (7.3)
17 (7.7)
18 (8.2)

19 (8.6)
29 (13.1)
30 (13.6)
30 (13.6)
32 (14.5)
32 (14.5)
34 (15.4)
35 (15.9)
35 (15.9)
38 (17.2)
38 (17.2)
38 (17.2)
39 (17.7)
41 (18.6)
43 (19.5)
44 (20.0)
54 (24.5)
57 (25.8)
55 (25.0)
57 (25.8)
61 (27.7)
62 (28.1)
64 (29.0)
66 (29.9)
66 (29.9)

Strut Systems
 B2000 SERIES
O.D. PIPE AND CONDUIT CLAMPS
• Safety Factor of 5
• Add PA to suffix for pre-assembled pipe clamps
• Other sizes available upon request
• Includes Combination Recess Hex Head Machine Screw and Square Nut.
• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI
min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50
• Standard finishes: ZN, HDG, SS4
O.D.

Design Load 1
O.D.
Design
Load 2
Design Load 3

O.D. CLAMPS
Hangers
Pipe/Conduit Clamps &

Part No. O.D. Hardware Material Gauge Design Load 1 Design Load 2 Design Load 3
Size (in.) Size Thickness Lbs. kN Lbs. kN Lbs. kN

B2059 4 /4”
3 (120.6) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2060 47/8” (123.8) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2018 5 (127.0) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2062 51/8” (130.2) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2063 51/4” (133.3) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2064 53/8” (136.5) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2019 51/2” (139.7) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2066 55/8” (142.9) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2067 53/4” (146.0) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2068 57/8” (149.2) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2069 6” (152.4) 5
/16”-18 11 (3.0) 1000 (4.45) 200 (0.89) 150 (0.67)
B2110 61/8” (155.6) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2111 61/4” (158.7) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2112 63/8” (161.9) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2113 61/2” (165.1) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2020 65/8” (168.3) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2115 63/4” (171.4) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2116 67/8” (174.6) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2117 7” (177.8) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2118 71/8” (181.0) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2119 71/4” (184.1) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2120 73/8” (187.3) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2121 71/2” (190.5) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2021 75/8” (193.7) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2123 73/4” (196.8) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2124 77/8” (200.0) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2125 8” (203.2) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2126 81/8” (206.4) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2127 81/4” (209.5) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2128 83/8” (212.7) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2129 81/2” (215.9) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2022 85/8” (219.1) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2130 103/4” (273.0) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
B2132 123/4” (323.8) 3
/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (0.89)
Reference page 126 for general fitting and standard finish specifica
Strut Systems 131
Load 1
O.D.

Design Load 3

Wt./C
Lbs. kg

68 (30.8)
69 (31.3)
70 (31.8)
70 (31.8)
70 (31.8)
77 (34.9)
78 (35.4)
83 (37.6)
84 (38.1)
85 (38.6)
87 (39.5)
94 (42.6)
96 (43.5)
98 (44.4)
99 (44.9)
100 (45.4)
102 (46.3)
104 (47.2)
106 (48.1)
108 (49.0)
110 (49.9)
112 (50.8)
114 (51.7)
115 (52.2)
117 (53.1)
119 (54.0)
121 (54.9)
 123 (55.8)
125 (56.7)
126 (57.2)
128 (58.1)
128 (58.1)
160 (72.6)
185 (83.9)
d standard finish specifications.
 B1508 THRU B1564S Design Load
CONDUIT/STRUT CLAMPS
• Safety Factor of 3 Setscre
• Clamps without saddles are not recommended for w
flexible conduit or cable
• All Sizes Include:
1
/4”-20 Slotted Hex Head Machine Screw
• Standard finish: ZN

Thicknes
Pipe/Conduit Clamps &

s
Hangers

B1508 THRU B1520 B1508S THRU B1524S

B1532S THRU B1564S

Use With Design Load Wt./C
Part No. Thickness Lbs. kN Lbs. kg
EMT Rigid Conduit
B1508 1
/2” (15) – – 16 Ga. (1.5) 200 (0.89) 7.4
B1512 3
/4” (20) 1
/2” (15) 16 Ga. (1.5) 200 (0.89) 8.0
B1516 1” (25) 3
/4” (20) 14 Ga. (1.9) 300 (1.33) 11.0
B1520 11/4” (32) 1” (25) 14 Ga. (1.9) 300 (1.33) 12.5
B1508S 1
/2” (15) – – 16 Ga. (1.5) 200 (0.89) 8.6
B1512S 3
/4” (20) 1
/2” (15) 16 Ga. (1.5) 200 (0.89) 9.2
B1516S 1” (25) 3
/4” (20) 14 Ga. (1.9) 300 (1.33) 12.7
B1520S 11/4” (32) 1” (25) 14 Ga. (1.9) 300 (1.33) 14.6
B1524S 11/2” (40) 11/4” (32) 12 Ga. (2.6) 400 (1.78) 20.5
B1532S 2” (50) 11/2” (40) 12 Ga. (2.6) 400 (1.78) 21.5
B1534S – – 2” (50) 12 Ga. (2.6) 400 (1.78) 22.7
B1540S 2 /2”
1 (65) 2 /2”
1 (65) 12 Ga. (2.6) 400 (1.78) 26.0
B1548S 3” (80) 3” (80) 12 Ga. (2.6) 400 (1.78) 30.2
B1556S 31/2” (90) 31/2” (90) 12 Ga. (2.6) 400 (1.78) 33.3
B1564S 4” (100) 4” (100) 12 Ga. (2.6) 400 (1.78) 36.6
Reference page 126 for general fitting and standard finish specifications.
132
B1532S THRU B1564S
Wt./C
Lbs. kg

(3.4)
(3.6)
(5.0)
(5.7)
(3.9)
(4.2)
(5.8)
(6.6)
(9.3)
(9.8)
(10.3)
(11.9)
(13.7)
(15.1)
(16.6)
ions.
Strut Systems
 B2601 THRU B2610
TWIST EAR™ PIPE CLAMP
• One piece break apart, screw retainer, thread impressions
• Tighter alignment, no need to leave additional space between
clamps in order to access nut and bolt
• Easier access bolt can be tightened directly from front
• Available in 1/2”, 3/4”, 1” rigid and EMT Conduit
• Recommended Torque 30 in. - lbs.
• Safety Factor of 3
• Standard finish: ZN
Allows for multiple clamps to be used in succession, with easier access
than other pipe clamps. Design Load
Break-apart - break in the
middle, bolt the ends together.

No loose pieces
screw
retainer and thr
Hangers
Pipe/Conduit Clamps &

Use With Design Load Wt./C

Part No. EMT Rigid Conduit Thickness Lbs. kN Lbs. kg

B2601 1
/2” (17.9) – – 16 Ga. 300 (1.34) 8.2 (3.7)
B2602 3
/4” (23.4) – – 14 Ga. 500 (2.24) 13.5 (6.1)
B2603 1” (29.5) – – 14 Ga. 500 (2.24) 15.6 (7.1)
B2608 – – 1
/2” (21.3) 16 Ga. 300 (1.34) 8.2 (3.7)
B2609 – – 3
/4” (26.7) 14 Ga. 500 (2.24) 13.5 (6.1)
B2610 – – 1” (33.4) 14 Ga. 500 (2.24) 15.6 (7.1)

BP081SS THRU BP475SS Design Load

P CLAMPS
• Minimizes induction heating Setscre
• Material: Stainless Steel Type 304 w
W
O.D. S ize
O.D. Size Height H Width W Design Load Wt/C.
Part No. In. mm In. mm In. mm Lbs. kN Lbs.
H
kg

BP081SS .250-.840 (6.4-21.3) 1.86 (47.2) 0.87 (22.1) 300 (1.33) 9.0 (4.1)
14
BP110SS .810-1.100 (20.6-28.0) 2.18 (55.4) 1.19 (30.2) 300 (1.33) 12.0 (5.4)
Gauge
BP135SS .850-1.350 (21.6-34.8) 2.25 (57.2) 1.38 (35.1) 300 (1.33) 14.0 (6.3)
BP175SS 1.250-1.750 (31.8-44.4) 2.78 (70.6) 1.78 (45.2) 300 (1.33) 21.0 (9.5)
BP205SS 1.550-2.050 (39.4-52.1) 3.00 (76.2) 2.28 (57.9) 300 (1.33) 30.0 (13.6)
BP250SS 2.00-2.50 (50.8-63.5) 3.43 (87.1) 2.83 (71.9) 300 (1.33) 35.0 (15.9)
BP300SS 2.55-3.00 (64.7-76.2) 3.87 (97.8) 3.15 (80.0) 300 (1.33) 39.0 (17.7)
BP325SS 2.75-3.25 (69.9-82.8) 4.06 (103.1) 3.28 (83.3) 300 (1.33) 41.0 (18.6)
BP375SS 3.25-3.75 (82.6-95.3) 4.60 (116.8) 3.83 (97.3) 300 (1.33) 47.0 (21.3)
BP425SS 3.75-4.25 (95.3-108.0) 5.13 (130.3) 4.50 (114.3) 300 (1.33) 54.0 (24.4)
BP475SS 4.25-4.75 (108.0- 5.70 (5.70) 4.85 (123.2) 300 (1.33) 58.0 (26.3)
120.7) Reference page 126 for general fitting and standard finish specifica
Strut Systems 133
 No loose pieces. One piece break apart with
screw
retainer and thread impressions.

oad

Wt/C.
bs. kg

(4.1)
(5.4)
(6.3)
(9.5)
(13.6)
(15.9)
(17.7)
 (18.6)
(21.3)
(24.4)
(26.3)
standard finish specifications.
 Design Load 1
VibraClamp™ Pipe Clamps
BVT SERIES VIBRACLAMP - COPPER & O.D.
• Safety Factor of 3
• Accesses tubing sizes 1/8” (3) to 6” (150)
• Allows easy one tool installation
• Endures both high (+300°F) and low (-40°F) temperatures
• Dampens vibration and noise
• Eliminates galvanic metal to metal contact Design Load 2
• Resists most industrial oils and solvents A Design Load 3
• Reduces thermal loss and gain
• Secures tubing firmly to channel (strut)
• Dielectric strength of 400 volts/mil B
• Includes cushion, clamp, screw and nut C
• Standard finishes: YZN, SS4

Catalog Tubing Copper Tubing A Dimensions B C Wt./C

Number O.D. Size Size Lbs. kg

BVT025 1
/4” (6.3) 1
/8” (3) 1.22 (30.9) 0.19 (4.8) 0.49 (12.4) 11
BVT037 3
/8” (9.5) 1
/4” (6) 1.36 (34.5) 0.25 (6.3) 0.61 (15.5) 12
BVT050 1
/2” (12.7) 3
/8” (10) 1.49 (37.8) 0.31 (7.8) 0.74 (18.8) 14
BVT062 5
/8” (15.9) 1
/2” (15) 1.62 (41.1) 0.38 (9.6) 0.86 (21.8) 15
BVT075 3
/4” (19.0) 5
/8” (17) 1.87 (47.4) 0.50 (12.7) 1.15 (29.2) 19
BVT087 7
/8” (22.2) 3
/4” (20) 2.00 (50.8) 0.56 (14.2) 1.27 (32.2) 21
BVT100 1” (25.4) – – 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 22
BVT112 11/8” (28.6) 1” (25) 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 26
BVT125 11/4” (31.7) – – 2.51 (63.7) 0.81 (20.6) 1.78 (45.2) 36
BVT137 13/8” (34.9) 11/4” (32) 2.51 (63.7) 0.81 (20.6) 1.78 (45.2) 38
BVT150 11/2” (38.1) – – 2.74 (69.6) 0.88 (22.4) 1.96 (49.8) 35
BVT162 15/8” (41.3) 1 /2”
1 (40) 3.00 (76.2) 1.00 (25.4) 2.20 (55.9) 40
BVT175 13/4” (44.4) – – 3.13 (79.5) 1.06 (26.9) 2.33 (59.1) 44
BVT187 17/8” (47.6) – – 3.28 (83.3) 1.13 (28.7) 2.46 (62.5) 40
BVT200 2” (50.8) – – 3.52 (89.4) 1.25 (31.7) 2.70 (68.6) 55
BVT212 21/8” (54.0) 2” (50) 3.52 (89.4) 1.25 (31.7) 2.70 (68.6) 55
BVT225 21/4” (57.1) – – 3.64 (92.4) 1.31 (33.2) 2.83 (71.8) 54
BVT250 21/2” (63.5) – – 3.91 (99.3) 1.43 (36.3) 3.11 (79.0) 56
BVT262 25/8” (66.6) 21/2” (65) 4.02 (102.1) 1.50 (38.1) 3.20 (81.3) 55
BVT300 3” (76.2) – – 4.42 (112.2) 1.68 (42.6) 3.61 (91.6) 67
BVT312 31/8” (79.4) 3” (80) 4.53 (115.0) 1.75 (44.4) 3.70 (93.9) 64
BVT362 35/8” (92.1) 31/2” (90) 5.05 (128.2) 2.00 (50.8) 4.23 (107.4) 76
BVT412 41/8” (104.8) 4” (100) 5.55 (140.9) 2.25 (57.1) 4.73 (120.1) 93
BVT612 61/8” (155.5) 6” (150) 7.62 (193.5) 3.25 (82.5) 6.74 (171.1) 136
Pipe/Conduit Clamps &
Hangers
Catalog Design Load 1 Design Load 2 Design Load 3
Number Lbs. kN Lbs. kN Lbs. kN

BVT025 400 (1.78) 50 (0.22) 50 (0.22)

BVT037 400 (1.78) 50 (0.22) 50 (0.22)
BVT050 400 (1.78) 50 (0.22) 50 (0.22)
BVT062 400 (1.78) 50 (0.22) 50 (0.22)
BVT075 600 (2.67) 75 (0.33) 75 (0.33)
BVT087 600 (2.67) 75 (0.33) 75 (0.33)
BVT100 600 (2.67) 75 (0.33) 75 (0.33)
BVT112 600 (2.67) 75 (0.33) 75 (0.33)
BVT125 600 (2.67) 75 (0.33) 75 (0.33)
BVT137 600 (2.67) 75 (0.33) 75 (0.33)
BVT150 600 (2.67) 75 (0.33) 75 (0.33)
BVT162 800 (3.56) 125 (0.56) 125 (0.56)
BVT175 800 (3.56) 125 (0.56) 125 (0.56)
BVT187 800 (3.56) 125 (0.56) 125 (0.56)
BVT200 800 (3.56) 125 (0.56) 125 (0.56)
BVT212 800 (3.56) 125 (0.56) 125 (0.56)
BVT225 800 (3.56) 125 (0.56) 125 (0.56)
BVT250 800 (3.56) 125 (0.56) 125 (0.56)
BVT262 800 (3.56) 125 (0.56) 125 (0.56)
BVT300 800 (3.56) 125 (0.56) 125 (0.56)
BVT312 800 (3.56) 125 (0.56) 125 (0.56)
BVT362 1000 (4.45) 200 (0.89) 150 (0.67)
BVT412 1000 (4.45) 200 (0.89) 150 (0.67)
BVT612 1000 (4.45) 200 (0.89) 150 (0.67)
Reference page 126 for general fitting and standard finish specifications.
134
 Design Load 2
Design Load 3

Wt./C
Lbs. kg
(5.0)
(5.4)
(6.3)
(6.8)
(8.6)
(9.5)
(10.0)
(11.8)
(16.3)
(17.2)
(15.9)
(18.1)
(19.9)
(18.1)
(25.0)
(25.0)
(24.5)
(25.4)
(25.0)
(30.4)
(29.0)
(34.5)
(42.2)
(61.6)
Strut Systems
 BVP SERIES
VIBRACLAMP - IRON PIPE & RIGID CONDUIT
VibraClamp™ Pipe Clam
Design Load 1
• Safety Factor of 3 Design Load 2
• Accesses pipe sizes 1/4” (6) to 6” (150) Design Load 3
• Allows easy one tool installation
• Endures both high (+300°F) and low (-40°F) temperatures
• Dampens vibration and noise
• Eliminates galvanic metal to metal contact
• Resists most industrial oils and solvents
• Reduces thermal loss and gain
• Secures pipe firmly to channel (strut)
• Dielectric strength of 400 volts/mil
• Includes cushion, clamp, screw and nut
• Standard finishes: YZN, SS4 A

B
C
Hangers
Pipe/Conduit Clamps &

Catalog Nominal Pipe Steel Dimensions Wt./C

Number Size O.D. Size A B C Lbs. kg

BVP025 1
/4” (6.3) 0.540 (13.7) 1.61 (39.9) 0.37 (9.4) 0.87 (22.1) 15
BVP037 3
/8” (9.5) 0.675 (17.1) 1.86 (47.2) 0.50 (12.7) 1.15 (29.2) 18
BVP050 1
/2” (12.7) 0.875 (22.2) 1.99 (50.5) 0.56 (14.2) 1.27 (32.3) 20
BVP075 3
/4” (19.0) 1.050 (26.7) 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 21
BVP100 1” (25.4) 1.312 (33.3) 2.51 (63.8) 0.81 (20.6) 1.77 (45.0) 20
BVP125 1 /4”
1 (31.7) 1.660 (42.2) 3.00 (76.2) 1.00 (25.4) 2.21 (56.1) 36
BVP150 11/2” (38.1) 1.900 (48.3) 3.21 (83.1) 1.12 (28.4) 2.41 (62.3) 40
BVP200 2” (50.8) 2.375 (60.3) 3.77 (95.8) 1.37 (34.8) 2.96 (75.2) 45
BVP250 21/2” (63.5) 2.875 (73.0) 4.28 (108.7) 1.62 (41.1) 3.46 (87.9) 54
BVP300 3” (76.2) 3.500 (88.9) 5.05 (128.3) 2.00 (50.8) 4.24 (107.7) 81
BVP350 3 /2”
1 (88.9) 4.000 (101.6) 5.55 (140.9) 2.25 (57.1) 4.74 (120.3) 87
BVP400 4” (101.6) 4.500 (114.3) 6.05 (153.7) 2.50 (63.5) 5.24 (133.1) 109
BVP500 5” (127.0) 5.563 (141.3) 6.84 (173.7) 3.00 (76.2) 6.24 (158.4) 136
BVP600 6” (152.4) 6.625 (168.3) 8.24 (209.3) 3.56 (90.4) 7.36 (186.9) 163
Catalog Design Load 1 Design Load 2 Design Load 3
Number Lbs. kN Lbs. kN Lbs. kN

BVP025 400 (1.78) 50 (0.22) 50 (0.22)

BVP037 600 (2.67) 75 (0.33) 75 (0.33)
BVP050 600 (2.67) 75 (0.33) 75 (0.33)
BVP075 600 (2.67) 75 (0.33) 75 (0.33)
BVP100 600 (2.67) 75 (0.33) 75 (0.33)
BVP125 800 (3.56) 125 (0.56) 125 (0.56)
BVP150 800 (3.56) 125 (0.56) 125 (0.56)
BVP200 800 (3.56) 125 (0.56) 125 (0.56)
BVP250 800 (3.56) 125 (0.56) 125 (0.56)
BVP300 1000 (4.45) 200 (0.89) 150 (0.67)
BVP350 1000 (4.45) 200 (0.89) 150 (0.67)
BVP400 1000 (4.45) 200 (0.89) 150 (0.67)
BVP500 1000 (4.45) 200 (0.89) 150 (0.67)
BVP600 1000 (4.45) 200 (0.89) 150 (0.67)
Reference page 126 for general fitting and standard finish specifica
Strut Systems 135
mp™ Pipe Clamps

Wt./C
Lbs. kg

(6.8)
(8.2)
(9.1)
(9.5)
(9.1)
(16.3)
(18.1)
(20.4)
(24.5)
(36.7)
(39.4)
(49.4)
(61.6)
(73.8)
nd standard finish specifications.
 IPH SERIES
Armafix ™
Clamps & Accessories
INSERTS - INSERTS WITH CLAMPS
• Engineered load-bearing inserts prevents insulation 1

compression /
• Innovative insulated pipe support 2
• Desirable “Foam-to-Foam” Bond ”
• Slip Data: 45 lbs. (0.20 kN) max
• Recommended Clamp Torque: 12-15 in-lbs. (1.3-1.7 Nm) W
• Service Temperature Range a
-58°F (-50°C) to +220°F (+105°C) l
l

I
n
s
u
l
a
t
i
o
n

T
h
Insert Only Assembly Insert & Clamp i
3
/4” Wall Insulation Thickness c
* Recommended pipe hanger size for insulation thickness shown. k
(Order hanger separately) n
e
s
s
*

R
e
c
o
m
m
e
n
d
e
d

p
i
p
e

h
a
n
g
e
Assembly Insert Only Pipe/Copper/OD Size Hanger
Part No. Part No. Size*
IPH03812 IPH03812WO 3
/8” O.D. 11/4”
IPH01212 IPH01212WO 1
/2” O.D. 11/4”
IPH05812 IPH05812WO 5
/8” O.D. 11/2”
IPH03412 IPH03412WO 3
/4” O.D. 11/2”
IPH07812 IPH07812WO 7
/8” O.D. 2”
IPH11812 IPH11812WO 3
/4” IPS & 11/8” O.D. 2”
 IPH13812 IPH13812WO 13/8” O.D. 21/2”
IPH15812 IPH15812WO 15/8” O.D. 21/2”
IPH11012 IPH11012WO 1 /2” IPS & 17/8” O.D.
1
3”
IPH21812 IPH21812WO 21/8” O.D. 3”
IPH25812 IPH25812WO 25/8” O.D. 31/2”
IPH31812 IPH31812WO 31/8” O.D. 4”
IPH35812 IPH35812WO 35/8” O.D. 5”
IPH41812 IPH41812WO 41/8” O.D. 6”
IPH40012 IPH40012WO 4” IPS 6”
IPH50012 IPH50012WO 5” IPS 8”
IPH60012 IPH60012WO 6” IPS 8”
Pipe/Conduit Clamps &
Hangers

Assembly Insert Only Pipe/Copper/OD Size Hanger

Part No. Part No. Size*
IPH03834 IPH03834WO 3
/8” O.D. 2”
IPH01234 IPH01234WO 1
/2” O.D. 2”
IPH05834 IPH05834WO 5
/8” O.D. 2”
IPH07834 IPH07834WO 7
/8” O.D. 21/2”
IPH11834 IPH11834WO 3
/4” IPS & 11/8” O.D. 21/2”
IPH13834 IPH13834WO 1 /8” O.D.
3
3”
IPH15834 IPH15834WO 15/8” O.D. 31/2”
IPH11034 IPH11034WO 11/2” IPS & 17/8” O.D. 31/2”
IPH21834 IPH21834WO 21/8” O.D. 4”
IPH25834 IPH25834WO 25/8” O.D. 5”
IPH31834 IPH31834WO 3 /8” O.D.
1
5”
IPH35834 IPH35834WO 35/8” O.D. 6”
IPH41834 IPH41834WO 41/8” O.D. 6”
IPH40034 IPH40034WO 4” IPS 6”
IPH50034 IPH50034WO 5” IPS 8”
IPH60034 IPH60034WO 6” IPS 10”
IPH80034 IPH80034WO 8” IPS 12”
Assembly Insert Only Pipe/Copper/OD Size Hanger
Part No. Part No. Size*
IPH05810 IPH05810WO 5
/8” O.D. 21/2”
IPH03410 IPH03410WO 3
/4” O.D. 21/2”
IPH07810 IPH07810WO 7
/8” O.D. 3”
IPH11810 IPH11810WO 3
/4” IPS & 11/8” O.D. 3”
IPH13810 IPH13810WO 13/8” O.D. 3 /2”
1

IPH15810 IPH15810WO 15/8” O.D. 31/2”

IPH11010 IPH11010WO 1 /2” IPS & 17/8” O.D.
1
4”
IPH21810 IPH21810WO 21/8” O.D. 4”
IPH25810 IPH25810WO 25/8” O.D. 5”
IPH31810 IPH31810WO 31/8” O.D. 5”
IPH35810 IPH35810WO 35/8” O.D. 6”
IPH41810 IPH41810WO 41/8” O.D. 6”
 IPH40010 IPH40010WO 4” IPS 8”
IPH50010 IPH50010WO 5” IPS 8”
IPH60010 IPH60010WO 6” IPS 10”
IPH80010 IPH80010WO 8” IPS 12”
IPH18230
ARMAFLEX®† INSUALTION TAPE
• 30 ft. (9.14 M) roll
†Armaflex® is a registared trademark of Armacell.

Reference page 126 for general fitting and standard finish specifications.
136
s
standard finish specifications.
Strut Systems
 Virba Cushion™ Accessor
B1999 FEATURES
VIBRA CUSHION™

• Packaged 20 Ft. (6.09 m) per carton Vibra Cushion is designed for use with
™

• Ideal Isolation Material refrigeration lines, HVAC, copper tubing,

• Inhibits Galvanic Corrosion glass pipe and hydraulic lines. It provides
• Dampens Sound and Vibrations an energy-absorption barrier between
• Service Temperature Range the lines and the mounting material and
-75°F (-60°C) to +375°F (+199°C) remains flexible thru its entire service
• Wt./Carton 3.8 Lbs. (1.7 kg) range of -75°F (-60°C) to
FOR RIGID CONDUIT OR IRON PIPE +375°F (+199°C).
This elastomer allows for expansion and
contraction within the mount- ing system
and prevents galvanic reaction between
dissimilar metals.
FOR THINWALL (EMT) CONDUIT

15/8”
(41.3)
Hangers
Pipe/Conduit Clamps &

Nominal Length of Vibra- Use Clamp

Size Cushion No.
1
/4” (6) 13/16” (30.2) B2026
3
/8” (10) 19/16” (39.7) B2027
1
/2” (15) 17/8” (47.6) B2008
5
/8” (17) 25/16” (58.7) B2029
3
/4” (20) 2 /4”
3 (69.8) B2030
1” (25) 3 /2”
1 (88.9) B2032
11/4” (32) 45/16” (109.5) B2011
11/2” (40) 51/8” (130.2) B2036
2” (50) 611/16” (169.9) B2013
2 /2”
1 (65) 81/4” (209.5) B2014
3” (80) 913/16” (249.2) B2048
3 /2” (90) 113/8” (288.9)
1 B2052
4” (100) 1215/16” (328.6) B2056
 5” (125) 161/8” (409.6) B2064
6” (150) 191/4” (488.9) B2112
8” (200) 251/2” (647.7) B2128
Nominal Length of Use Clamp
Size Vibra-Cushion No.
3
/8” (10) 21/8” (54.0) B2002
1
/2” (15) 2 /8”
5 (66.7) B2009
3
/4” (20) 31/4” (82.5) B2031
1” (25) 41/8” (104.8) B2004
11/4” (32) 53/16” (131.8) B2012
11/2” (40) 515/16” (150.8) B2038
2” (50) 71/2” (190.5) B2042
21/2” (65) 9” (228.6) B2046
3” (80) 11” (279.4) B2051
31/2” (90) 121/2” (317.5) B2055
4” (100) 141/2” (368.3) B2059
5” (125) 177/16” (442.9) B2067
6” (150) 203/4” (527.0) B2116
Nominal Length of Vibra- Use Clamp
Size Cushion No.
3
/8” (10) 113/16” (46.0) B2027
1
/2” (15) 213/16” (58.7) B2002
3
/4” (20) 27/8” (73.0) B2003
1” (25) 35/8” (92.1) B2032
11/4” (32) 43/8” (120.6) B2036
11/2” (40) 57/16” (138.1) B2012
2” (50) 67/8” (174.6) B2013
ISO PIPE BVS Type - Vibra Strip™ for 15/8" (41.3) wide B-
• Non-adhesive rubber tape Line channel
• Fuses to itself • Fits securely in 15/8” wide channel
• Water resistant • Temperature range: -20°F to 212°F
• Ideal Isolation Material • Ideal Isolation & Vibration Dampening Qualities
• Prevents galvanic reaction caused by dissimilar metal • 45 durometer hardness
contact • Material: Neoprene
• Temperature Range
-140°F (-60°C) to +395°F (+200°C)
1”
(25.4)

Max. Load
Lbs. per Wt.
Part No. Thickness Ft./Roll Lineal In. Std. Each Part No. Lbs.
/
kg 25.4 mm

In. mm Ft. m Length Pkg. Lbs. kg

ISO .020 (0.5)

36 (11)
BVS-12 40 (18.1)
12” (304.8) 25 .46 (.21)

BVS-120 40 (18.1)
120” (3048.0) 25 4.60 (2.08)

Reference page 126 for general fitting and standard finish specifica
Strut Systems 137
a Cushion™ Accessories

FOR COPPER TUBING TYPE L & K

 Strip™ for 15/8" (41.3) wide B-

” wide channel
: -20°F to 212°F
bration Dampening Qualities
ness

Wt.
Std. Each Part No. Lbs.
/
kg 25.4 mm

kg

18.1)
12” (304.8) 25 .46 (.21)

(18.1)
120” (3048.0) 25 4.60 (2.08)

eral fitting and standard finish specifications.

137
 B2400 SERIES Pipe Size Design Load 1
STANDARD PIPE STRAP
• Safety Factor of 5
• B2400-3/4 thru B2400-8 are UL listed
• Order hardware separately
• Other sizes available upon request
• Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield;

2” - 12”, ASTM A1018 33,000 PSI min. yield; Design Load C B

14”-Larger, ASTM A36 3 W
Design Load 2
• Standard finish: ZN
• Ductile Iron Sizes Available
• Meets requirements of MSS SP-58 & SP-69 Type 26

Part No. Pipe Size A B C T W

B2400-1/2 1
/2” (15) 5
/16” (7.9) 7
/16” (11.1) 213/16” (71.4) 10 Ga. (3.4) 15/8” (41.3)
B2400-3/4 3
/4” (20) 5
/16” (7.9) 7
/16” (11.1) 3” (76.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-1 1” (25) 5
/16” (7.9) 7
/16” (11.1) 317/32” (89.7) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/4 11/4” (32) 5
/16” (7.9) 7
/16” (11.1) 33/4” (95.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-11/2 11/2” (40) 5
/16” (7.9) 7
/16” (11.1) 41/16” (103.2) 10 Ga. (3.4) 15/8” (41.3)
B2400-2 2” (50) 7
/16” (11.1) 11
/16” (17.4) 521/32” (143.6) 1
/4” (6.3) 15/8” (41.3)
B2400-21/2 21/2” (65) 7
/16” (11.1) 11
/16” (17.4) 65/32” (156.3) 1
/4” (6.3) 15/8” (41.3)
B2400-3 3” (80) 7
/16” (11.1) 11
/16” (17.4) 625/32” (172.2) 1
/4” (6.3) 15/8” (41.3)
B2400-31/2 31/2” (90) 7
/16” (11.1) 11
/16” (17.4) 79/32” (184.9) 1
/4” (6.3) 15/8” (41.3)
B2400-4 4” (100) 9
/16” (14.3) 11
/16” (17.4) 725/32” (197.6) 1
/4” (6.3) 15/8” (41.3)
B2400-5 5” (125) 9
/16” (14.3) 11
/16” (17.4) 87/8” (225.4) 1
/4” (6.3) 15/8” (41.3)
B2400-6 6” (150) 9
/16” (14.3) 11
/16” (17.4) 915/16” (252.4) 1
/4” (6.3) 15/8” (41.3)
B2400-8 8” (200) 9
/16” (14.3) 11
/16” (17.4) 1131/32” (304.0) 1
/4” (6.3) 15/8” (41.3)
B2400-10 10” (250) 9
/16” (14.3) 11
/16” (17.4) 14” (355.6) 1
/4” (6.3) 15/8” (41.3)
B2400-12 12” (300) 9
/16” (14.3) 11
/16” (17.4) 16” (406.4) 1
/4” (6.3) 15/8” (41.3)
B2400-14 14” (350) 15
/16” (23.8) 11/2” (38.1) 203/4” (527.0) 3
/8” (9.5) 13/4” (44.4)
B2400-16 16” (400) 15
/16” (23.8) 11/2” (38.1) 223/4” (577.8) 3
/8” (9.5) 13/4” (44.4)
B2400-18 18” (460) 15
/16” (23.8) 13/4” (44.4) 27” (685.8) 1
/2” (12.7) 13/4” (44.4)
B2400-20 20” (510) 15
/16” (23.8) 13/4” (44.4) 29” (736.6) 1
/2” (12.7) 13/4” (44.4)
B2400-24 24” (610) 15
/16” (23.8) 13/4” (44.4) 33” (838.2) 1
/2” (12.7) 13/4” (44.4)
Pipe/Conduit Clamps &
Hangers

Part No. Design Load 1 Design Load 2 Design Load 3 Wt./C

Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2400-1/2 600 (2.67) 150 (0.67) 105 (0.47) 23 (10.4)

B2400-3/4 600 (2.67) 150 (0.67) 105 (0.47) 26 (11.8)
B2400-1 600 (2.67) 150 (0.67) 120 (0.53) 31 (14.0)
B2400-11/4 600 (2.67) 150 (0.67) 120 (0.53) 36 (16.3)
B2400-11/2 600 (2.67) 150 (0.67) 120 (0.53) 39 (17.7)
B2400-2 1200 (5.34) 480 (2.14) 180 (0.80) 93 (42.2)
B2400-21/2 1200 (5.34) 480 (2.14) 180 (0.80) 106 (48.1)
B2400-3 1200 (5.34) 480 (2.14) 300 (1.33) 132 (59.9)
B2400-31/2 1200 (5.34) 480 (2.14) 300 (1.33) 151 (68.5)
B2400-4 1500 (6.67) 600 (2.67) 450 (2.00) 160 (72.6)
B2400-5 1500 (6.67) 600 (2.67) 450 (2.00) 192 (87.1)
B2400-6 1500 (6.67) 600 (2.67) 450 (2.00) 219 (99.3)
B2400-8 2000 (8.90) 800 (3.56) 600 (2.67) 297 (134.7)
B2400-10 2000 (8.90) 800 (3.56) 600 (2.67) 465 (210.9)
B2400-12 2000 (8.90) 800 (3.56) 600 (2.67) 560 (254.0)
B2400-14 2000 (8.90) 800 (3.56) 600 (2.67) 761 (345.2)
B2400-16 2000 (8.90) 800 (3.56) 600 (2.67) 861 (390.5)
B2400-18 2000 (8.90) 800 (3.56) 600 (2.67) 1297 (588.3)
B2400-20 2000 (8.90) 800 (3.56) 600 (2.67) 1426 (646.8)
B2400-24 2000 (8.90) 800 (3.56) 600 (2.67) 1682 (762.9)
Reference page 126 for general fitting and standard finish specifications.
138
 Hole Size
A
T

B
W
Design Load 2
Strut Systems
 B437 SERIES TWO PIECE PIPE STRAP Hole
Size
• Clamp halves can turn allowing pipe to be
fastened to channel at any direction A
• Order hardware separately
• Standard finish: ZN
B2417 STRUT MOUNTED PIPE GUIDE
• Copper tubing sizes available - B2417CT Series
• Standard finish: ZN
B2070 THRU B2080
PARALLEL PIPE CLAMP
• Safety Factor of 2
• Designed to support pipe or rigid conduit
• Includes:
1 pr. Pipe Clamps
1 pc. Stand Off Plate
1 pc. Slotted Hex Head

Wt./C
Part No. Pipe Size A T Lbs. kg

B437-1/2 /2”
1 (15) 5
/16” (7.9) 10 Ga. (3.4) 22 (10.0)
B437-3/4 /4”
3 (20) 5
/16” (7.9) 10 Ga. (3.4) 26 (11.8)
B437-1 1” (25) 5
/16” (7.9) 10 Ga. (3.4) 30 (13.6)
B437-11/4 11/4” (32) 5
/16” (7.9) 10 Ga. (3.4) 35 (15.9)
B437-11/2 11/2” (40) 5
/16” (7.9) 10 Ga. (3.4) 38 (17.2)
B437-2 2” (50) 7
/16” (11.1) 1
/4” (6.3) 91 (41.3)
B437-21/2 21/2” (65) 7
/16” (11.1) 1
/4” (6.3) 104 (47.2)
B437-3 3” (80) 7
/16” (11.1) 1
/4” (6.3) 130 (58.9)
B437-31/2 31/2” (90) 7
/16” (11.1) 1
/4” (6.3) 149 (67.6)
B437-4 4” (100) 9
/16” (11.1) 1
/4” (6.3) 158 (71.6)
B437-5 5” (125) 9
/16” (11.1) 1
/4” (6.3) 190 (86.2)
B437-6 6” (150) 9
/16” (11.1) 1
/4” (6.3) 217 (98.4)
B437-8 8” (200) 9
/16” (11.1) 1
/4” (6.3) 295 (133.8)
Hangers
Pipe/Conduit Clamps &

Minimum Includes Wt./C

Part No. Pipe Size Radial Clearance Clamp No. Lbs. kg

B2417-1/2 1
/2" (15) 1
/16" (1.6) B2009 22 (10.0)
B2417-3/4 3
/4" (20) 1
/16" (1.6) B2010 25 (11.3)
B2417-1 1" (25) 3
/32" (2.3) B2034 30 (13.6)
B2417-11/4 11/4" (32) 3
/32" (2.3) B2037 47 (21.8)
B2417-11/2 11/2" (40) 3
/32" (2.3) B2039 51 (23.1)
B2417-2 2" (50) 1
/8" (3.2) B2043 62 (28.1)
B2417-21/2 21/2" (65) 1
/8" (3.2) B2047 69 (31.3)
B2417-3 3" (80) 5
/32" (3.9) B2016 108 (49.0)
B2417-31/2 31/2" (90) 5
/32" (3.9) B2017 118 (53.5)

Material Design Load Wt./C

Part No. Pipe Size A Thickness Lbs. kN Lbs. kg

B2070 3
/8” (10) 111/16” (42.9) 16 Ga. (1.5) 300 (1.33) 24 (10.9)
B2071 1
/2” (15) 13/4” (44.4) 16 Ga. (1.5) 300 (1.33) 26 (11.8)
B2072 3
/4” (20) 17/8” (47.6) 14 Ga. (1.9) 300 (1.33) 30 (13.6)
B2073 1” (25) 2” (50.8) 14 Ga. (1.9) 400 (1.78) 33 (14.9)
B2074 11/4” (32) 23/16” (55.6) 14 Ga. (1.9) 400 (1.78) 36 (16.3)
B2075 11/2” (40) 25/16” (58.7) 12 Ga. (2.6) 500 (2.22) 50 (22.7)
B2076 2” (50) 29/16” (65.1) 12 Ga. (2.6) 500 (2.22) 55 (24.9)
B2077 2 /2” (65)
1
27/8” (73.0) 12 Ga. (2.6) 500 (2.22) 60 (27.2)
B2078 3” (80) 33/16” (80.9) 12 Ga. (2.6) 500 (2.22) 66 (29.9)
B2079 31/2” (90) 37/16” (87.3) 11 Ga. (3.0) 500 (2.22) 85 (38.5)
B2080 4” (100) 35/8” (92.1) 11 Ga. (3.0) 500 (2.22) 95 (43.1)
Machine Screws 1 pc. Pipe Size
Square Nut
• Standard finish: ZN
A dimension, from bottom of A
channel to center of pipe.

Design Load
Reference page 126 for general fitting and standard finish specifica
Strut Systems 139
 T
Clearance

14 Gauge
(1.9)
al fitting and standard finish specifications.
139
B670 SERIES B671 SERIES
PARALLEL PIPE CLAMP EDGE PIPE CLAMP
• Designed to support pipe or rigid conduit parallel to the edge • Designed to support pipe or rigid conduit perpendicular to
of a beam or angle iron the edge of a beam or angle iron
• Hardware included • Hardware included
• Material: Malleable Iron • Material: Malleable Iron
• Standard finish: HDG • Standard finish: HDG

Part Pipe or Conduit Wt./C

Number Size Lbs. kg
B670-3/8 3
/8” (10) 32 (14.5)
B670-1/2 1
/2” (15) 58 (26.3)
B670-3/4 3
/4” (20) 64 (29.0)
B670-1 1” (25) 70 (31.7)
B670-11/4 1 /4”
1 (32) 77 (34.9)
B670-11/2 11/2” (40) 93 (42.2)
B670-2 2” (50) 105 (47.6)
B670-21/2 21/2” (65) 143 (64.8)
B670-3 3” (80) 164 (74.4)
B670-31/2 3 /2”
1 (90) 190 (86.2)
B670-4 4” (100) 205 (93.0)
Part Pipe or Conduit Wt./C
Number Size Lbs. kg
B671- /2 1
/2”
1 (15) 67 (30.4)
B671-3/4 /4”
3 (20) 71 (32.2)
B671-1 1” (25) 85 (38.5)
B671-11/4 11/4” (32) 91 (41.3)
B671-11/2 11/2” (40) 115 (52.1)
B671-2 2” (50) 135 (61.2)
B671-21/2 21/2” (65) 183 (83.0)
B671-3 3” (80) 230 (104.3)
Pipe/Conduit Clamps &
Hangers
 B422 SERIES RIGHT ANGLE CLAMP
• Safety Factor of 5
• Material: 7 Gauge (4.5)
• Standard finishes: ZN, SS4
B3367S
D
RETAINING STRAP e
• Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6), s
10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2) i
• Material: Steel g
• Standard finishes: ZN, PLN n

L
o
a
d

V
e
r
t
i
c
a
l

P
u
l
l

Design Load
Part No. Conduit Size A Vertical Pull Wt./C
Lbs. kg Lbs. kg

B422-1/2 1
/2” (15) 23/8” (60.3) 250 (1.11) 38 (17.2)
B422-3/4 3
/4” (20) 23/8” (60.3) 300 (1.33) 39 (17.7)
B422-1 1” (25) 27/8” (73.0) 400 (1.78) 48 (21.8)
B422-11/4 1 /4”
1 (32) 27/8” (73.0) 400 (1.78) 50 (22.7)
B422-11/2 11/2” (40) 31/4” (82.5) 500 (2.22) 59 (26.7)
B422-2 2 (50) 311/16” (93.7) 600 (2.67) 75 (34.0)
B422-21/2 21/2” (65) 41/4” (107.9) 700 (3.11) 98 (44.4)
B422-3 3” (80) 47/8” (123.8) 800 (3.56) 111 (50.3)
B422-31/2 3 /2”
1 (90) 57/16” (138.1) 900 (4.00) 123 (55.8)
B422-4 4” (100) 6” (152.4) 1000 (4.45) 135 (61.2)
Hole Dia. For Use Wt./C**
Part No. D With Lbs. kg

B3367S-1-L /16”
7 (30.1) B422-1/2 & 3/4 33.4 (5.8)
B3367S-2-L /16”
9 (30.1) B422-1, 11/4 & 11/2 12.8 (15.1)
3
/8” Dia.
(19.0)
** Wt./C based on 6” (152.4) length. For each additional inch in strap length add the following to the Wt./C.
For B3367S-1 add 5.7 Lbs (2.6 kg)
For B3367S-2 add 2.2 Lbs (1.0 kg)
Note: Use Fig. 69 (Old B3367-3/8 retaining strap, page 115) for B422-2 thru 4

Reference page 126 for general fitting and standard finish specifications.
140

3/8” x B3367S- 13
1/2” (9.5)
1 Gauge
(2.3)
(12.7)
Slots
3/8” x B3367S- 13
1/2” (9.5)
1 Gauge
(2.3)
(12.7)
Slots

L
21 /4
”
(57.1
)

3/4”
(19. L
0)
gid conduit perpendicular to
n
 A

U-Bolt
and Hex
Nuts

llowing to the Wt./C.

Strut Systems

13
Gauge
(2.3)
13
Gauge
(2.3)

B3367S-
2
12
Gauge
(2.6)
 B2301 SERIES
ONE HOLE EMT STRAP Hole Dia.
• Standard finish: ZN

W
T
Part No. Conduit Hole Dia. Wt./C
Size T W Lbs. kg

B2301-1/2 1
/2” (15) 0.050 (1.3) /4”
3 (19.0) /32”
9 (7.1) 2.4 (1.1)
B2301- /4 3 3
/4” (20) 0.050 (1.3) /8”
7 (22.2) 9
/32” (7.1) 4.2 (1.9)
B2301-1 1” (25) 0.050 (1.3) 1” (25.4) 9
/32” (7.1) 8.3 (3.7)
B2301-11/4 11/4” (32) 0.065 (1.6) 11/4” (31.7) 9
/32” (7.1) 11.0 (5.0)
B2301-11/2 11/2” (40) 0.090 (2.3) 1” (25.4) 11
/32” (8.7) 14.8 (6.7)
B2301-2 2” (50) 0.090 (2.3) 11/4” (31.7) 13
/32” (10.3) 21.6 (9.8)
Hangers
Pipe/Conduit Clamps &

B2302 SERIES
ONE HOLE RIGID CONDUIT/PIPE STRAP
• Standard finish: ZN

Part Conduit/Pipe Hole Wt./C

No. Size T W Dia. Lbs. kg

B2302-1/4 1
/4” (6) 0.045 (1.1) 5
/8” (15.9) 13
/64” (5.1) 1.4 (0.6)
B2302-3/8 3
/8” (10) 0.050 (1.3) 3
/4” (19.0) /32”
9 (7.1) 2.4 (1.1)
B2302-1/2 1
/2” (15) 0.050 (1.3) 7
/8” (22.2) 9
/32” (7.1) 3.3 (1.5)
B2302-3/4 3
/4” (20) 0.050 (1.3) 7
/8” (22.2) 9
/32” (7.1) 3.8 (1.7)
B2302-1 1” (25) 0.065 (1.6) 1” (25.4) 9
/32” (7.1) 7.2 (3.2)
B2302-11/4 11/4” (32) 0.065 (1.6) 11/4” (31.7) 21
/64” (8.3) 11.0 (5.0)
B2302-11/2 11/2” (40) 11 Ga. (3.0) 1” (25.4) 0.380 (9.6) 19.2 (8.7)
B2302-2 2” (50) 11 Ga. (3.0) 11/4” (31.7) 0.389 (9.9) 28.8 (13.0)
B2302-21/2 21/2” (65) 7 Ga. (4.5) 11/4” (31.7) 0.665 (16.9) 55.2 (25.0)
B2302-3 3” (80) 7 Ga. (4.5) 11/4” (31.7) 0.650 (16.5) 68.0 (30.8)
B2302-31/2 31/2” (90) 1
/4” (6.3) 11/4” (31.7) 0.622 (15.8) 96.0 (43.5)
B2302-4 4” (100) 1
/4” (6.3) 11/4” (31.7) 0.630 (16.0) 108.0 (49.0)
T
B2084 THRU B2091
ONE HOLE O.D. TUBING CLAMP
• Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield
• Standard finish: ZN

Wt./C
Part No. O.D. Size A Lbs. kg

B2084 1
/4” (6.3) 7
/8” (22.2) 4.0 (1.8)
B2085 5
/16” (7.9) 29
/32” (23.0) 4.2 (1.9)
B2086 3
/8” (9.5) 31
/32” (24.6) 5.2 (2.3)
B2087 1
/2” (12.7) 11/16” (25.9) 5.8 (2.6)
B2088 5
/8” (15.9) 13/32” (27.8) 7.1 (3.2)
B2089 3
/4” (19.0) 15/32” (29.1) 7.7 (3.5)
B2090 7
/8” (22.2) 17/32” (30.7) 8.7 (3.9)
B2091 1” (25.4) 19/32” (32.2) 10.0 (4.5)
Reference page 126 for general fitting and standard finish specific
Strut Systems 141
Hole
Dia.

W
or general fitting and standard finish specifications.
141

9/32” (7.1)
Dia.
3/8” (9.5)

15/8”
(41.3)
A O.D.
Size
 BL1400 SERIES Design Load
CONDUIT HANGER
• Safety Factor of 3 W
• Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit
• Hardware included
• Standard finishes: ZN, SS4
Conduit
Size
Conduit Design Load
Part No Size A B T W Lbs. kN
A
BL1400 1
/2” (15) /32”
29 (23.0) 9
/32” (7.1) 16 Ga. (1.5) 3
/4” (19.0) T590 (2.62)
BL1410 3
/4” (20) /32”
31 (24.6) 9
/32” (7.1) 16 Ga. (1.5) 3
/4” (19.0) 590 (2.62)
BL1420 (25) (31.7) (7.1) (1.5) (19.0) Hole Size (2.62)
1” 11/4” 9
/32” 16 Ga. 3
/4” 590
B
BL1425 11/4” EMT (32) 11/4” (31.7) 9
/32” (7.1) 18 Ga. (1.2) 7
/8” (22.2) 590 (2.62)
BL1430 11/4” R,11/2” EMT (32) 113/32” (35.7) 9
/32” (8.7) 18 Ga. (1.2) 7
/8” (22.2) 590 (2.62)
BL1440 11/2” R (40) 15/8” (41.3) 11
/32” (8.7) 16 Ga. (1.5) 1” (25.4) 755 (3.36)
BL1450 2” (50) 21/16” (47.6) 11
/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 755 (3.36)
BL1460 21/2” (65) 21/16” (52.4) 11
/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 755 (3.36)
BL1470 3” (80) 21/2” (63.5) 11
/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 820 (3.65)
BL1480 31/2” (90) 23/4” (69.8) 11
/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 850 (3.78)
BL1490 4” (100) 31/2” (88.9) 11
/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 1410 (6.27)
Pipe/Conduit Clamps &
Hangers

B3373 SERIES Pipe

RISER CLAMP Size
• Safety Factor of 3.5
• B3373-3/4 thru B3373-8 are UL listed
• Includes Hex Head Cap Screws and Hex Nuts
• Standard finishes: ZN, PLN
T
W
Pipe Design Load Wt./C A
Part No. Size A Lbs. kN Lbs. kg

B3373-1/2 /2”
1 (15) 9” (228.6) 255 (1.13) 101 (45.9)
B3373-3/4 /4”
3 (20) 91/4” (234.9) 255 (1.13) 105 (47.7)
B3373-1 1” (25) 99/16” (242.9) 255 (1.13) 109 (49.4)
B3373-11/4 11/4” (32) 10” (254.0) 255 (1.13) 112 (50.9)
B3373-11/2 11/2” (32) 101/4” (260.3) 255 (1.13) 113 (51.1)
B3373-2 2” (40) 103/4” (273.0) 255 (1.13) 165 (75.0)
B3373-21/2 21/2” (50) 111/4” (285.7) 390 (1.73) 180 (81.6)
B3373-3 3” (65) 1115/16” (303.2) 530 (2.36) 195 (88.4)
B3373-31/2 31/2” (80) 123/8” (314.3) 670 (2.98) 217 (98.5)
B3373-4 4” (90) 127/8” (327.0) 810 (3.60) 228 (103.5)
B3373-5 5” (100) 14” (355.6) 1160 (5.16) 480 (217.7)
B3373-6 6” (100) 153/16” (385.8) 1570 (6.98) 526 (238.6)
B3373-8 8” (100) 173/4” (450.8) 2500 (11.12) 957 (434.1)
Reference page 126 for general fitting and standard finish specifications.
142
 Wt./C
Lbs. kg

6 (2.7)
7 (3.2)
8 (3.6)
10 (4.5)
10 (4.5)
17 (7.7)
25 (11.3)
26 (11.8)
33 (14.9)
36 (16.3)
40 (18.1)
Strut Systems
 B3690 SERIES A
ADJUSTABLE J HANGER DIA.
• Safety Factor of 5 C
• Material:
12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield
11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1
7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and
1
/4” (6.3) ASTM A1018 33,000 PSI min. yield
• Standard finish: ZN

‘E’ Diameter. Is For Wall Mounting

Hangers
Pipe/Conduit Clamps &

Bolt Size ‘F’ And Hex Nut Included

Felt Line B3690F- TxW

SIZE Design Load Design Load

Pipe or
Part No. Conduit Size A B C D E F

B3690-1/2 1
/2” (15) 13
/32” (10.3) 23/32” (53.2) 1” (25.4) 111/16” (42.5) 13
/32” (10.3) 1/4”-20 x 21/4”
B3690-3/4 3
/4” (20) 13
/32” (10.3) 211/32” (59.5) 1” (25.4) 113/16” (46.2) 13/32” (10.3) 1/4”-20 x 21/2”
B3690-1 1” (25) 13
/32” (10.3) 219/32” (65.9) 1” (25.4) 115/16” (49.2) 13/32” (10.3) 1/4”-20 x 23/4”
B3690-11/4 11/4” (32) 13
/32” (10.3) 213/16” (71.4) 1” (25.4) 2” (50.4) 13/32” (10.3) 1/4”-20 x 3”
B3690-11/2 11/2” (40) 13
/32” (10.3) 31/16” (77.8) 1” (25.4) 2 /8”
1 (53.7) 13/32” (10.3) 1/4”-20 x 31/4”
B3690-2 2” (50) 13
/32” (10.3) 31/2” (88.9) 1” (25.4) 2 /16” (58.7) 13/32”
5 (10.3) 1/4”-20 x 31/2”
B3690-21/2 21/2” (65) 9
/16” (14.3) 47/16” (112.7) 1” (25.4) 3” (76.2) 9
/16” (14.3) 3/8”-16 x 41/2”
B3690-3 3” (80) 9
/16” (14.3) 47/8” (123.8) 1” (25.4) 31/8” (79.4) 9
/16” (14.3) 3/8”-16 x 5”
B3690-31/2 31/2” (90) 9
/16” (14.3) 53/16” (131.8) 1” (25.4) 33/16” (81.0) 9/16” (14.3) 3/8”-16 x 51/2”
B3690-4 4” (100) 11
/16” (17.5) 61/8” (155.6) 11/4” (31.8) 37/8” (98.4) 9
/16” (14.3) 3/8”-16 x 61/2”
B3690-5 5” (125) 11
/16” (17.5) 63/4” (171.4) 11/2” (38.1) 4” (100.8) 9
/16” (14.3) 3/8”-16 x 71/2”
B3690-6 6” (150) 13
/16” (20.6) 73/4” (196.8) 13/16” (30.2) 47/16” (112.7) 9/16” (14.3) 3/8”-16 x 81/2”
B3690-8 8” (200) 13
/16” (20.6) 91/4” (235.0) 1” (25.4) 415/16” (125.4) 9/16” (14.3) 3/8”-16 x 101/2”
Design Load Wt./C
Part No. T W Lbs. kN Lbs. kg

B3690-1/2 12 Ga. (2.6) 3

/4” (19.0) 400 (1.78) 20
B3690-3/4 12 Ga. (2.6) 3
/4” (19.0) 400 (1.78) 23
B3690-1 12 Ga. (2.6) 3
/4” (19.0) 400 (1.78) 24
B3690-11/4 12 Ga. (2.6) 3
/4” (19.0) 400 (1.78) 27
B3690-11/2 12 Ga. (2.6) 3
/4” (19.0) 400 (1.78) 29
B3690-2 12 Ga. (2.6) 3
/4” (19.0) 400 (1.78) 32
B3690-21/2 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 71
B3690-3 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 77
B3690-31/2 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 84
B3690-4 7 Ga. (4.5) 11/4” (31.7) 800 (3.56) 139
B3690-5 7 Ga. (4.5) 11/4” (31.7) 800 (3.56) 166
B3690-6 1
/4” (6.3) 11/4” (31.7) 1000 (4.45) 226
B3690-8 1
/4” (6.3) 11/2” (38.1) 1200 (5.34) 332
Reference page 126 for general fitting and standard finish specifica
Strut Systems 143
 ‘D’ Rod Take-Out
B

1
/4”-20 x 21/4”
1
/4”-20 x 21/2”
1
/4”-20 x 23/4”
1
/4”-20 x 3”
1
/4”-20 x 31/4”
1
/4”-20 x 31/2”
3
/8”-16 x 41/2”
3
/8”-16 x 5”
3
/8”-16 x 51/2”
3
/8”-16 x 61/2”
3
/8”-16 x 71/2”
3
/8”-16 x 81/2”
3
/8”-16 x 101/2”
Wt./C
Lbs. kg

20 (9.1)
23 (10.4)
24 (10.9)
27 (12.2)
29 (13.1)
32 (14.5)
71 (32.2)
 77 (34.9)
84 (38.1)
139 (63.0)
166 (75.3)
226 (102.5)
332 (150.6)
d standard finish specifications.
 Fig. 4B SERIES ( Formerly B386 Series) SUSPENSION ROD PIPE STRAP C
• Safety Factor of 3
A
• Includes Hex Head Cap Screws and Hex Nuts
• Standard finishes: ZN, GRN B
D
Pipe Size Rod Size B C D Bolt Design Load
Part No. in. (mm) A in. (mm) in. (mm) in. (mm) Size Lbs. (kN)

4B-3/4 3
/4" (20) 3
/8"-16 1" (25.4) 27/8" (73.0) 25/8" (66.7) 5
/16"-18 330 (1.47)
4B-1 1" (25) 3
/8"-16 1" (25.4) 31/4" (82.5) 215/16" (74.6) 5
/16"-18 330 (1.47)
Design Load
4B-11/4 11/4" (32) 3
/8"-16 1" (25.4) 39/16" (90.6) 31/4" (82.5) 5
/16"-18 330 (1.47)
4B-11/2 11/2" (40) 3
/8"-16 1" (25.4) 313/16" (96.8) 37/16" (87.3) 5
/16"-18 330 (1.47)
4B-2 2" (50) 3
/8"-16 11/2" (38.1) 5 /8" (130.2)
1
45/8" (117.5) 5
/16"-18 440 (1.78)
4B-21/2 21/2" (65) 1
/2"-13 13/4" (44.4) 55/8" (142.9) 53/8" (136.5) 3
/8"-16 440 (1.78)
4B-3 3" (80) 1
/2"-13 17/8" (47.6) 63/4" (171.4) 61/8" (155.5) 3
/8"-16 660 (2.93)
4B-31/2 31/2" (90) 1
/2"-13 2" (50.8) 71/4" (184.1) 63/4" (171.4) 3
/8"-16 660 (2.93)
4B-4 4" (100) 5
/8"-11 2" (50.8) 85/8" (219.1) 71/4" (184.1) 2
/2"-13 800 (3.56)
4B-5 5" (125) 5
/8"-11 2" (50.8) 97/8" (250.8) 85/16" (211.1) 5
/8"-11 980 (4.36)
4B-6 6" (150) 3
/4"-10 21/8" (54.0) 1015/16" (277.8) 91/2" (241.3) 5
/8"-11 980 (4.36)
4B-8 8" (200) 7
/8"-9 21/8" (54.0) 137/16" (341.2) 111/2" (292.1) 3
/4"-10 1200 (5.34)
Pipe/Conduit Clamps &
Hangers

B394 SERIES ‘B’

PIPE STRAP Dia.
• Safety Factor of 3
• Includes:
1 Pair Pipe Clamps with Hex Head Cap Screws and Hex Nuts 1 Hanger Strap
• Standard finishes: ZN
‘T’
Clam
p
A Only

Pipe Size
Design
‘W’ Load Wt./C
Part No. Pipe Size A B T W Lbs.
Clamp kN Lbs. kg

B394-3/4 /4”
3 (20) 35/16” (84.1) 7
/16” (11.1) 1
/8” (3.2) 1” (25.4) 500 Design
Only (2.22)Load 71
B394-1 1” (25) 33/4” (95.2) 7
/16” (11.1) 1
/8” (3.2) 1” (25.4) 500 (2.22) 76
B394-11/4 11/4” (32) 4” (101.6) 7/16” (11.1) 1
/8” (3.2) 1” (25.4) 500 (2.22) 77
B394-11/2 11/2” (40) 45/16” (109.5) 7/16” (11.1) 1
/8” (3.2) 1” (25.4) 800 (3.56) 79
B394-2 2” (50) 51/2” (139.7) 7/16” (11.1) 1
/4” (6.3) 1” (25.4) 1040 (4.62) 166
B394-21/2 21/2” (65) 63/8” (161.9) 9/16” (14.3) 1
/4” (6.3) 1” (25.4) 1040 (4.62) 179
B394-3 3” (80) 7” (177.8) 9/16” (14.3) 1
/4” (6.3) 1” (25.4) 1040 (4.62) 190
B394-31/2 31/2” (90) 79/16” (192.1) 9/16” (14.3) 1
/4” (6.3) 1” (25.4) 1040 (4.62) 203
B394-4 4” (100) 85/8” (219.1) 11/16” (17.4) 1
/4” (6.3) 11/4” (31.7) 1040 (4.62) 320
B394-5 5” (125) 93/4” (247.6) 11/16” (17.4) 1
/4” (6.3) 11/4” (31.7) 1040 (4.62) 353
B394-6 6” (150) 115/8” (295.3) 13/16” (20.6) 3
/8” (9.5) 11/2” (38.1) 1615 (7.18) 637
B394-8 8” (200) 137/8” (352.4) 13/16” (20.6) 3
/8” (9.5) 11/2” (38.1) 1615 (7.18) 837
Reference page 126 for general fitting and standard finish specifications.
144
 Wt./C
Lbs. (kg)

56 (3.6)
60 (3.6)
Design Load
74 (4.5)
79 (5.0)
156 (5.0)
176 (5.4)
198 (6.3)
219 (7.2)
288 (8.1)
390 (8.1)
448 (8.1)
691 (8.1)

‘B’
Dia.

‘T’
Clam
p
Only

Pipe Size
Wt./C
Lbs. kg

Design Load 71 (32.2)

76 (34.5)
77 (34.9)
79 (35.8)
166 (75.3)
179 (81.2)
190 (86.2)
203 (92.1)
320 (145.1)
353 (160.1)
637 (288.9)
837 (379.6)
Strut Systems
 B591 SERIES
PIPE BRACKET SADDLE AND CLAMP
• Safety Factor of 3
• Inside brace not required on B591-2 and B591-21/2
• Includes: 113/16”
1 pc. Saddle bottom (30.1)
1 pc. Saddle top (clamp) Pipe
2 pcs. Hex Head Cap Screws 2 pcs. Hex Nuts Size
• Standard finish: ZN

1/4”
(6.3)
Hangers
Pipe/Conduit Clamps &

B D
W

A
C

Design Load
Design Load
Part No. Pipe Size A B C D W Lbs. kN

B591-2 2” (50) 41/2” (114.3) 41/2” (114.3) 73/16” (182.6) 31/16” (77.8) 15/8” (41.3) 1235 (5.53)
B591-2 /2 1
2 /2”
1 (65) 5” (127.0) 5” (127.0) 715/16” (201.6) 39/16” (90.5) 15/8” (41.3)
1180 (5.29)
B591-3 3” (80) 51/2” (139.7) 53/4” (146.0) 83/4” (222.2) 313/16” (96.8) 15/8” (41.3) 1125 (5.04)
B591-31/2 31/2” (90) 6” (152.4) 6 /4” (171.4) 9 /2”
3 1 (241.3) 49/16” (115.9) 15/8” (41.3) 1070 (4.79)
B591-4 4” (100) 61/2” (165.1) 63/4” (171.4) 101/4” (260.3) 61/16” (128.6) 15/8” (41.3) 1015 (4.55)
B591-5 5” (125) 71/2” (190.5) 8” (203.2) 121/8” (308.0) 61/16” (154.0) 15/8” (41.3) 960 (4.30)
B591-6 6” (150) 8” (203.2) 83/4” (222.2) 133/16” (335.0) 6 /16”
13 (173.0) 1 /8”
5 (41.3) 905 (4.05)
B591-8 8” (200) 9” (228.6) 101/2” (266.7) 159/16” (395.3) 8 /16” (217.5) 2” (50.8)
9
850 (3.81)
Reference page 126 for general fitting and standard finish specific
Strut Systems 145
 113/16”
(30.1)
Pipe
Size

1/4”
(6.3)

Wt./C
Lbs. kg

290 (131.5)

330 (149.7)
439 (199.1)
490 (222.2)
545 (247.2)
666 (302.1)
724 (328.4)
1087 (493.0)
d standard finish specifications.
 PIPE BLOCK-2” (50) TO 8” (200) PIPE
• Required hardware not included:
1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut
• Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg) Per Pair
Pipe/Conduit Clamps &
Hangers

Hole For 3/8”-16 HHCS

1”
(25.4)
31/16”
(77.8)
Reference page 126 for general fitting and standard finish specifications.
146
PIPE BLOCK-2” (50) TO 8” (200) PIPE
• Required hardware not included:
1 pc. 3/8”-16 x 1” Hex Head Cap Screw 1 pc. 3/8”-16 Channel Nut
• Material: 1/4” (6.3) thick 15/8” (41.3) wide ASTM A1018 33,000 PSI min. yield
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg) Per Pair

Hole For 3/8”-16 HHCS

1”
(25.4)
31/16”
(77.8)
Reference page 126 for general fitting and standard finish specifications.
146
Strut Systems
 PIPE ROLLERS-1/2” (15) TO 8” (200) PIPE
• Design Load 500 Lbs. (2.22 kN)
• Safety Factor of 5
• When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog)
• Malleable Iron Rollers
• Sold in pairs
• Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts
• Standard finish: ZN
• Wt./C 256 Lbs. (116.1 kg) Per Pair

25 /8
”
Hangers
Pipe/Conduit Clamps &

(66.7
)

REFERENCE CHART - A DIMENSION 23/8”

REFERENCE CHART - B DIMENSION (60.3)

Insulation Thickness in. (mm)

Pipe Size
0” (0.0)
1” (25.4)
1/”
1 2 (38.1)
2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)
1
/2” (15) 71/4” (184.1) – – – – – – – – – – –
/4”
3 (20) 7 /4”
1 (184.1) 7 /4”
1 (184.1) 7 /8”
5 (193.7) 8” (203.2) – – – – –
1” (25) 71/4” (184.1) 71/4” (184.1) 75/8” (193.7) 81/4” (209.5) – – – – –
11/4” (32) 71/4” (184.1) 71/4” (184.1) 8” (203.2) 81/4” (209.5) – – – – –
11/2” (40) 71/4” (184.1) 75/8” (193.7) 8” (203.2) 81/2” (215.9) 9” (228.6) – – –
 2” (50) 71/4” (184.1) 75/8” (193.7) 81/2” (215.9) 81/2” (215.9) 9” (228.6) – – –
21/2” (65) 71/4” (184.1) 8” (203.2) 81/2” (215.9) 9” (228.6) 10” (254.0) – – –
3” (80) 71/4” (184.1) 81/2” (215.9) 9” (228.6) 9” (228.6) 10” (254.0) 10” (254.0) –
31/2” (90) 71/4” (184.1) 81/2” (215.9) 9” (228.6) 10” (254.0) 10” (254.0) 10” (254.0) –
4” (100) 75/8” (193.7) 9” (228.6) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) –
5” (125) 81/2” (215.9) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) 11” (279.4) 12”
6” (150) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) 11” (279.4) 11” (279.4) 12”
8” (200) 10” (254.0) 11” (279.4) 11” (279.4) 11” (279.4) 12” (304.8) – – –
Insulation Thickness in. (mm)
Pipe Size
0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2)
1
/2” (15) 211/16” (68.3) – – – – – – – – – –
/4”
3 (20) 2 /16”
13 (71.4) 3 /8”
7 (98.4) 4 /8”
3 (111.1) 4 /8”
7 (123.8) – – – –
1” (25) 215/16” (74.6) 43/16” (106.4) 411/16” (119.1) 51/16” (128.6) – – – –
11/4” (32) 31/8” (79.4) 43/16” (106.4) 45/8” (117.5) 51/8” (130.2) – – – –
11/2” (40) 31/4” (82.5) 43/8” (111.1) 4 /8”
7 (123.8) 55/16” (134.9) 5 /4”
3 (146.0) – –
2” (50) 39/16” (90.5) 411/16” (119.1) 51/16” (128.6) 55/8” (142.9) 61/16” (154.0) – –
21/2” (65) 313/16” (96.8) 47/8” (123.8) 55/16” (134.9) 6” (152.4) 63/8” (161.9) – –
3” (80) 41/8” (104.8) 51/16” (128.6) 59/16” (141.3) 61/8” (155.6) 67/16” (163.5) 7” (177.8)
31/2” (90) 43/8” (111.1) 55/16” (134.9) 513/16” (147.6) 61/4” (158.7) 611/16” (169.9) 71/4” (184.1)
4” (100) 45/8” (117.5) 59/16” (141.3) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3)
5” (125) 5” (127.0) 61/16” (154.0) 67/16” (163.5) 7” (177.8) 73/8” (187.3) 77/8” (200.0)
6” (150) 51/2” (139.7) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) 715/16” (201.6) 81/2” (215.9)
8” (200) 615/16” (160.3) 73/8” (187.3) 715/16” (201.6) 87/16” (214.3) 815/16” (227.0) – –
Reference page 126 for general fitting and standard finish specifica
Strut Systems 147
 B

23/8”
(60.3)

4” (101.6)
– –
– –
– –
– –
– –
 – –
– –
– –
– –
– –
12” (304.8)
12” (304.8)
– –

4” (101.6)
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
8 /16”
13 (223.8)
91/2” (241.3)
– –
standard finish specifications.
 PIPE ROLLER SERIES - 3/4” (20) TO 12” (300) PIPE
• Design Load 750 Lbs. (3.33 kN)
• Safety Factor of 5
• Requires field assembly
• When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog)
• Malleable Iron Rollers
• Sold in pairs
• Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts
• Reference sizing chart on page 135
• Standard finish: ZN

25/8”
(66.7)

2
3

/
8
”
(
6
0
.
3
)
Pipe/Conduit Clamps &
Hangers

REFERENCE CHART - A DIMENSION

Wt./C PR
Part No. A Lbs. kg

B219 71/4” (184.1) 253 (114.7)

B219-1 8” (203.2) 258 (117.0)
B219-2 9” (228.6) 263 (119.3)
B219-3 10” (254.0) 269 (122.0)
B219-4 107/8” (276.2) 274 (124.8)
B219-5 115/8” (295.3) 279 (126.5)
REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)
1
/2” (15) 211/16” (68.3) – – – – – – – – – – –
3
/4” (20) 213/16” (71.4) 37/8” (98.4) 41/2” (114.3) 47/8” (123.8) – – – – –
1” (25) 215/16” (74.6) 43/16” (106.4) 45/8” (117.5) 51/16” (128.6) – – – – –
11/4” (32) 31/8” (79.4) 43/16” (106.4) 45/8” (117.5) 51/8” (130.2) – – – – –
11/2” (40) 31/4” (82.5) 47/16” (112.7) 47/8” (123.8) 51/4” (133.3) 53/4” (146.0) – – –
2” (50) 39/16” (90.5) 45/8” (117.5) 53/16” (131.8) 51/2” (139.7) 61/16” (154.0) – – –
21/2” (65) 33/4” (95.2) 47/8” (123.8) 51/4” (133.3) 6” (152.4) 63/8” (161.9) – – –
3” (80) 41/8” (104.8) 51/8” (130.2) 59/16” (141.3) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) –
 31/2” (90) 41/4” (107.9) 51/4” (133.3) 513/16” (147.6) 61/4” (158.7) 611/16” (169.9) 71/16” (179.4) –
4” (100) 49/16” (115.9) 51/2” (139.7) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) –
5” (125) 51/16” (128.6) 61/16” (154.0) 67/16” (163.5) 7” (177.8) 73/8” (187.3) 77/8” (200.0) 815/16”
6” (150) 57/16” (138.1) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) 77/8” (200.0) 8 /16”
15 (211.1) 99/16”
8” (200) 63/8” (161.9) 77/16” (188.9) 715/16” (201.6) 83/8” (212.7) 9” (228.6) – – –
10” (250) 75/16” (185.7) 83/16” (208.0) – – – – – – – – –
12” (300) 81/4” (209.5) – – – – – – – – – – –
Reference B219 sizing chart on page 149
Reference page 126 for general fitting and standard finish specifications.
148
 B

4” (101.6)

– –
– –
– –
– –
– –
– –
– –
– –
 – –
– –
815/16” (227.0)
99/16” (242.9)
– –
– –
– –

Strut Systems
 B219 SIZING CHART
Insulation Thickness in. (mm)
Pipe Size
0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2)
1
/2” (15) B219 – – – – –
/4”
3
(20) B219 B219 B219 B219-1 – –
1” (25) B219 B219 B219-1 B219-1 – –
11/4” (32) B219 B219 B219-1 B219-1 – –
11/2” (40) B219 B219 B219-1 B219-2 B219-2 –
2” (50) B219 B219-1 B219-1 B219-2 B219-2 –
21/2” (65) B219 B219-1 B219-2 B219-2 B219-3 –
3” (80) B219 B219-1 B219-2 B219-2 B219-3 B219-3
31/2” (90) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4
4” (100) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4
5” (125) B219-1 B219-2 B219-3 B219-3 B219-4 B219-4
6” (150) B219-2 B219-3 B219-3 B219-4 B219-4 B219-5
8” (200) B219-3 B219-4 B219-4 B219-5 B219-5 –
10” (250) B219-4 B219-5 – – – –
12” (300) B219-5 – – – – –
Hangers
Pipe/Conduit Clamps &

Reference page 126 for general fitting and standard finish specific
Strut Systems 149
 4” (101.6)
–
–
–
–
–
–
–
–
–
–
B219-5
B219-5
–
–
–

d standard finish specifications.

 PIPE ROLLERS-6” (150) TO 18” (450) PIPE
• Design Load 1500 Lbs. (6.67 kN)
• Safety Factor of 5
• Requires field assembly
• When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog)
• Malleable Iron Rollers
• Sold in pairs
• Required hardware not included:
2 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 2 pcs. 1/2”-13 Channel Nuts
• Standard finish: ZN
• Wt./C 889 Lbs. (403.2 kg)
Pipe/Conduit Clamps &

4”
(101.
6)
Hangers

REFERENCE CHART - A DIMENSION

Insulation Thickness in. (mm)
Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2)

6” (150) 99/16” (242.9) 103/16” (258.8) 105/8” (269.9) 11” (279.4) 113/8” (288.9) 113/4” (298.4)
8” (200) 10 /4”1 (260.3) 11 /16”
1 (281.0) 11 /8” (288.9)
3
11 /4”
3 (298.4) 12 /16” (309.6)
3
121/2” (317.5)
10” (250) 11” (279.4) 113/4” (298.4) 121/8” (308.0) 121/2” (317.5) 1213/16” (325.4) 131/8” (333.4)
12” (300) 1111/16” (296.9) 129/16” (319.1) 127/8” (327.0) 131/4” (336.5) 139/16” (344.5) 137/8” (352.4)
14” (350) 121/16” (306.4) 127/8” (327.0) 133/16” (335.0) 139/16” (344.5) 137/8” (352.4) 141/4” (361.9)
16” (400) 123/4” (323.8) 131/2” (342.9) 137/8” (352.4) 1413/16” (360.4) 141/2” (368.3) 147/8” (377.8)
18” (450) 131/2” (342.9) 141/4” (361.9) 145/8” (371.5) 15” (381.0) 155/16” (388.9) 155/8” (396.9)
REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2)

6” (150) 67/8” (174.6) 77/8” (200.0) 83/8” (212.7) 87/8” (225.4) 93/8” (238.1) 97/8” (250.8)
8” (200) 7 /16”
13 (198.4) 8 /8”
7 (225.4) 9 /8” (238.1)
3
9 /8”
7 (250.8) 10 /16” (265.1)
7
1015/16 (277.8)
10” (250) 813/16” (223.8) 97/8” (250.8) 107/16” (265.1) 1015/16” (277.8) 113/8” (228.9) 11”7/8” (301.6)
12” (300) 93/4” (247.6) 1015/16” (277.8) 113/8” (288.9) 117/8” (301.6) 125/16” (312.7) 1213/16 (325.4)
14” (350) 105/16” (261.9) 113/8” (288.9) 117/8” (301.6) 125/16” (312.7) 1213/16” (325.4) 13”1/4” (336.5)
16” (400) 115/16” (287.3) 125/16” (312.7) 1213/16” (325.4) 131/4” (336.5) 133/4” (349.2) 141/4” (361.9)
18” (450) 121/4” (311.1) 131/4” (336.5) 133/4” (349.2) 143/16” (360.4) 1411/16” (373.1) 151/8” (384.2)
Reference page 126 for general fitting and standard finish specifications.
150
 B

4” (101.6)

121/2” (317.5)
131/4” (336.5)
137/8” (352.4)
145/8” (371.5)
147/8” (377.8)
151/2” (393.7)
165/16” (414.3)

4” (101.6)

1015/16” (277.8)
117/8” (301.6)
1213/16” (325.4)
133/4” (349.2)
141/4” (361.9)
151/8” (384.2)
161/16” (408.0)

Strut Systems
 PIPE ROLLERS-16” (400) TO 30” (750) PIPE
• Design Load 2000 Lbs. (8.89 kN)
• Safety Factor of 5
• Requires field assembly
• When used with B3160 thru B3165 Saddles (See Pipe Hanger Catalog)
• Malleable Iron Rollers
• Sold in pieces
• Required hardware not included:
4 pcs. 1/2”-13 x 11/4” Hex Head Cap Screws 4 pcs. 1/2”-13 Channel Nuts
• Standard finish: ZN
• Wt./C 889 Lbs. (403.2 kg)
Hangers
Pipe/Conduit Clamps &

4”
(101.
6)

213/16”
(71.4)
REFERENCE CHART - A DIMENSION
Insulation Thickness in. (mm)
Pipe Size
0” (0.0)
1” (25.4)
1/”
1 2 (38.1)
2” (50.8) 21/2” (63.5) 3” (76.2)
16” (400) 153/16” (385.8) 155/8” (396.9) 157/8” (403.2) 16” (406.4) 161/4” (412.7) 161/2” (419.1)
18” (450) 151/2” (393.7) 16” (406.4) 163/16” (411.2) 163/8” (415.9) 169/16” (420.7) 163/4” (425.4)
20” (500) 16” (406.4) 163/8” (415.9) 169/16” (420.7) 167/8” (428.6) 1615/16” (430.2) 173/16” (436.6)
24” (600) 1613/16” (427.0) 175/16” (439.7) 171/2” (444.5) 171/2” (444.5) 1711/16” (449.3) 177/8” (454.0)
30” (750) 1713/16” (452.4) 181/4” (463.5) 183/8” (466.7) 189/16” (471.5) 187/8” (476.2) 187/8” (479.4)
REFERENCE CHART - B DIMENSION
Insulation Thickness in. (mm)
Pipe Size
0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2)
16” (400) 1013/16” (274.6) 1115/16” (303.2) 123/8” (314.3) 1215/16” (328.6) 133/8” (339.7) 1315/16” (354.0)
18” (450) 11 /8”
7 (301.6) 12 /16” (328.6) 13 /16” (341.3) 13 /16” (354.0)
15 7 15
14 /16” 7 (366.7) 1415/16” (379.4)
20” (500) 123/16” (325.4) 1315/16” (354.0) 147/16” (366.7) 147/8” (377.8) 157/16” (392.1) 157/8” (403.2)
24” (600) 1413/16” (376.2) 157/8” (403.2) 163/8” (415.9) 167/8” (428.6) 173/8” (441.3) 177/8” (454.0)
30” (750) 1713/16” (452.4) 18 /8”
7 (479.4) 19 /8”
3 (492.1) 19 /8”
7 (504.8) 203/8” (517.5) 205/16” (531.8)
Reference page 126 for general fitting and standard finish specifica
Strut Systems 151
 B

4” (101.6)
17” (431.8)
173/16” (436.6)
171/2” (444.5)
181/8” (460.4)
191/4” (488.9)

4” (101.6)
1415/16” (379.4)
1515/16” (404.8)
1615/16” (430.2)
187/8” (479.4)
2115/16” (557.2)
d standard finish specifications.
 DURA-BLOK™ Rooftop Supports
Our DURA-BLOK products gives you a versatile and long-term solution for all your roof top support ne
in mind, DURA-BLOK is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable
Manufactured to provide years of service in harsh, roof top environments, DURA-BLOK is made from 1
require no supplemental rubber pads, and will not float or blow away. 1” gaps between blocks allow w
longer assemblies. For added strength, the DURA-BLOK support channel is through bolted on all sizes
reflective strip is incorporated on both sides of each DURA-BLOK.
Beyond product durability, DURA-BLOK helps to dampen vibration, are not sharp or abrasive and requ
maximize existing roof life - and roof structural and environmental integrity.
Recommended Torque (In channels)
See page 44 Channel Nuts & Hardware section
DURA-BLOK Supports

Materials & Finishes

See appropriate fitting’s pages.
Alternative finishes available upon request.

Metric
Metric dimensions are shown in parentheses.
Unless noted, all metric dimensions are in millimeters.

152
 all your roof top support needs. Designed with flexibility
, HVAC, duct, conduit, cable tray, and roof walkways.
DURA-BLOK is made from 100% recycled rubber,
gaps between blocks allow water to flow freely around
s through bolted on all sizes. For added visibility, a

sharp or abrasive and require no roof penetration to

y.

Strut Systems
 DURA-BLOK™ Rooftop Supports
SUPPORT BASES ONLY
• Base only - see chart for height, width and length.
• 100% recycled rubber, UV resistant.

DBM
• Load Rating - Ultimate Uniform Load (See Chart Below)*
• DURA-BLOK channel support is designed as an economical support for piping systems, cable tray, HVAC equipm
applications. The DURA-BLOK is UV resistant and suitable for any type of roofing material or other flat surfaces. M
screw fasteners for securing accessories.

DBP
Height x Width x Length Wt./Each Load Rating
Part No. In. (mm) Lbs. (kg) Lbs. (kN)

DBM 4” x 6” x 4.8” (101.6 x 152.4 x 2.35 (1.07) 200 (0.89)

121.9)
DBP 4” x 6” x 9.6” (101.6 x 152.4 x 4.48 (2.03) 500 (2.22)
243.8)
DB SERIES SUPPORT BASE WITH B44 CHANNEL
• Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) - see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating - Ultimate Uniform Load (See Chart Below)*
• DURA-BLOK DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC eq
and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing m
(For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 1
• For sloped roofs use B634 adjustable hinge fittings (see page 84).

DB10

DB20
Height x Width x Length Wt./Each Load Rating
Part No. In. (mm) Lbs. (kg) Lbs. (kN)

DB5 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 2.75 (125) 200 (0.89)

DB10 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 5.28 (2.39) 500 (2.22)
DB20 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 10.63 (4.82) 1000 (4.45)
DB30 5” x 6” x 30.8” (127.0 x 152.4 x 782.3) 15.99 (7.25) 1500 (6.67)
 DB40 5” x 6” x 41.4” (127.0 x 152.4 x 21.34 (9.68) 2000 (8.89)
1051.5)
DB48 5” x 6” x 52.0” (127.0 x 152.4 x 26.70 (12.40) 2500 (11.12)
1320.8)
DURA-BLOK Supports

DB30
DB6 SERIES SUPPORT BASE WITH B12 CHANNEL
• Base with 12 ga. (2.6mm) galvanized channel 27/16” high (61.9mm) - see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating - Ultimate Uniform Load (See Chart Below)*
• DURA-BLOK DB-Series channel support is designed for superior support of piping systems, cable tray, HVAC eq
and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing m
(For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 1
• For sloped roofs use B634 adjustable hinge fittings (see page 84).

DB610

DB620
Height x Width x Length Wt./Each Load Rating
Part No. In. (mm) Lbs. (kg) Lbs. (kN)

DB610 67/16” x 6” x 9.6” (163.5 x 152.4 x 243.8) 6.36 (2.88) 500 (2.22)
DB620 67/16” x 6” x (163.5 x 152.4 x 513.1) 12.90 (5.85) 1000 (4.45)
DB630 20.2”
67/16” x 6” x (163.5 x 152.4 x 782.3) 19.45 (8.82) 1500 (6.67)
DB640 30.8”
67/16” x 6” x (163.5 x 152.4 x 26.00 (11.79) 2000 (8.89)
41.4” 1051.5)
DB648 67/16” x 6” x (163.5 x 152.4 x 32.55 (14.76) 2500 (11.12)
52.0” 1320.8)
 DB630
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifica
Strut Systems 153
BLOK™ Rooftop Supports

pport for piping systems, cable tray, HVAC equipment and many other
y type of roofing material or other flat surfaces. Material effectively accepts

- see chart for height, width and length.

r support of piping systems, cable tray, HVAC equipment, walkway systems

d suitable for installation on any type of roofing material or other flat surfaces.
sed with these DURA-BLOK supports, see page 158)
84).
mm) - see chart for height, width and length.

r support of piping systems, cable tray, HVAC equipment, walkway systems

d suitable for installation on any type of roofing material or other flat surfaces.
sed with these DURA-BLOK supports, see page 158)
84).
d capacity.
membrane.
52 for general fitting and standard finish specifications.
153
 DURA-BLOK™ Rooftop Supports
DB10 SERIES
SUPPORT BASES WITH B22 CHANNEL
• Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel 15/8” high (41.3mm) - see chart for height, width an
• 100% recycled rubber, UV resistant.
• Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*
• DURA-BLOK DB10-Series channel support is designed for superior support of piping systems, cable tray, HVAC eq
and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing m
(For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 15

DB10-36

DB10-50

Height x Width x Length Wt./Each

Part No. In. (mm) Lbs. (kg)

DB10-28 55/8” x 6” x 28” (142.9 x 152.4 x 711.2) 13.16 (5.97)

DB10-36 55/8” x 6” x 36” (142.9 x 152.4 x 914.4) 14.36 (6.51)
DB10-42 55/8” x 6” x 42” (142.9 x 152.4 x 15.52 (7.04)
1066.8)
DB10-50 55/8” x 6” x 50” (142.9 x 152.4 x 16.45 (7.46)
1270.0)
DB10-60 55/8” x 6” x 60” (142.9 x 152.4 x 17.94 (8.14)
1524.0)
DBM SERIES
SUPPORT BASE WITH RISER ROD & CLAMP
• Base with 3/8”-16 threaded rod and B3198H clamp - see chart for height, width and length
• 100% recycled rubber, UV resistant.
• Load Rating” 50 lbs. (0.22kN) (Ultimate Load)*
• DURA-BLOK DBM-Series pipe/tubing support is designed for support of single piping systems where elevation ad
DURA-BLOK is UV resistant and suitable for installation on any type of roofing material or other flat surfaces.
DBM-1

DBM-2CT
DURA-BLOK Supports

Clamp Part Block -Height x Width x Length Height** Min.-Max. Wt./Each

Part No. No.† In. (mm) In. (mm) Lbs. (kg)

DBM- /2CT 1
B3198HCT-1/2 4” x 6” x 4.8” (101.6 x 152.4 x 9.69”-11.19” (246.1-284.2) 2.75
121.9)
DBM-3/4CT B3198HCT-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 9.84”-11.34” (249.9-2288.0) 2.76
121.9)
DBM-1CT B3198HCT-1 4” x 6” x 4.8” (101.6 x 152.4 x 9.95”-11.45” (252.7-290.8) 2.84
121.9)
DBM-11/4CT B3198HCT-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 10.13”- (257.3-295.4) 2.95
121.9) 11.63”
DBM-11/2CT B3198HCT-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 10.28”- (261.1-299.2) 2.96
121.9) 11.78”
DBM-2CT B3198HCT-2 4” x 6” x 4.8” (101.6 x 152.4 x 10.53”- (267.4-305.5) 3.03
121.9) 12.03” (250.4-288.5)
DBM- /2 1
B3198H- /2
1
4” x 6” x 4.8” (101.6 x 152.4 x 9.86”-11.36” 2.78
121.9)
DBM-3/4 B3198H-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 10.06”- (255.5-293.6) 2.84
121.9) 11.56” (257.5-295.6)
DBM-1 B3198H-1 4” x 6” x 4.8” (101.6 x 152.4 x 10.14”- 2.86
121.9) 11.64”
DBM-11/4 B3198H-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 10.25”- (260.3-298.4) 2.93
121.9) 11.75”
DBM-11/2 B3198H-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 10.42”- (264.6-302.7) 2.99
121.9) 11.92” (270.7-308.8)
DBM-2 B3198H-2 4” x 6” x 4.8” (101.6 x 152.4 x 10.66”- 3.10
121.9) 12.16”
† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing.
* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
154
see chart for height, width and length.

systems, cable tray, HVAC equipment, walkway systems

tion on any type of roofing material or other flat surfaces.
-BLOK supports, see page 158)

length

systems where elevation adjustment is needed. The

al or other flat surfaces.
 Wt./Each
Lbs. (kg)

(1.25)
(1.25)
(1.29)
(1.34)
(1.34)
(1.37)
(1.26)
(1.29)
(1.30)
 (1.33)
(1.36)
(1.41)
pe/tubing.
pacity.
brane.
s.
Strut Systems
 DURA-BLOK™ Rooftop Sup
DBE SERIES
SUPPORT BASE WITH ROD RISERS & CHANNEL
• Base with (2) 1/2” electro zinc all threaded rod risers - Top channel is 1” (25.4mm) tall. See
chart for adjustable height x wide x length.
• 100% recycled rubber, UV resistant.
• Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate
CLDP10)
• DURA-BLOK DBE-Series channel support is designed as a superior support of piping
systems, cable tray, HVAC equipment and many other applications where elevation L
o
adjustment is critical. The DURA-BLOK is UV resistant and suitable for installation on any
o
type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers s
and roller supports that can be used with these DURA-BLOK supports, see page 158) e
DBR SERIES n
SUPPORT BASE WITH ROD RISERS & PIPE ROLL
h
• Base with (2) 1/2” electro zinc all threaded rod risers and a e
B3114-31/2 pipe roll with sockets - base is 4” (101.6mm) high x 6” (152.4mm) wide x 9.6” x
(243.8mm) long. Overall height is 12” (304.8mm) from bottom of base to contact point on
roller. n
• Pipe roll & sockets for up to 31/2” (90) pipe sizes. u
• 100% recycled rubber, UV resistant. t
• Load Rating” 200 lbs. (0.89kN) (To increase load capacity use load distribution plate s
a
CLDP10)
n
• DURA-BLOK DBR-Series support is designed to support pipe up to 31/2” (90) nominal size d
where difference in elevation is required and longitudinal movement is expected. The
DURA-BLOK is UV resistant and approved for installation on any type of roofing material or s
other flat surfaces. li
CLDP10 d
e
LOAD DISTRIBUTION PLATE
• 11 ga. (3.0mm) steel plate with slots. p
• Dimensions: 15/8” (41.3mm) wide x 91/2” (241.3mm) long. l
• DURA-BLOK CLDP10 load bearing stabilizer plate increases load ratings for DBE Series a
and DBR Series by allowing the load from the threaded rods to be distributed over the t
length of the base instead of the point load where the rods attach to the base. e

u
n
d
e
r
t
h
e

f
l
a
t
w
a
s
h
e
r
s
 Adjustable Height x Width x Length Wt./Each
Part No. In. (mm) Lbs. (kg)

DBE10-8 5 /2-8” x 6” x 9.6”

1 (139.7-152.4 x 152.4 x 243.8) 5.68 (2.58)
DBE10-12 51/2-12” x 6” x 9.6” (139.7-304.8 x 152.4 x 243.8) 5.72 (2.59)
DBE10-16 51/2-16” x 6” x 9.6” (139.7-406.4 x 152.4 x 243.8) 5.76 (2.61)
DURA-BLOK Supports

Adjustable Height x Width x Length Wt./Each

Part No. In. (mm) Lbs. (kg)

DBR10-12 up to 12” x 6” x (up to 304.8 x 152.4 x 243.8) 8.20 (3.72)

9.6”

Thickness x Width x Length Wt./Each

Part No. In. (mm) Lbs. (kg)

CLDP10 11 Ga. x 15/8” x 91/2” (3.0 x 41.3 x 241.3) 0.53 (0.24)

 Retighten the hex nuts with plate in place

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specific
Strut Systems 155
K™ Rooftop Supports
e

g and standard finish specifications.

5
 DURA-BLOK™ Rooftop Supports
DB DS SERIES
SUPPORT BASES WITH B22SH
VERTICAL & HORIZONTAL CHANNEL MEMBERS
• Product is shipped unassembled.
• Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) - Bases are 5” (127.0mm) high x 6” (
long.
Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm)
Fittings & Hardware - Electro-Plated Steel
• 100% recycled rubber, UV resistant.
• Ultimate Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*
• DURA-BLOK DB DS-Series channel support with risers is designed for superior support of piping systems, cable
systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of r
surfaces.
(For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 15
DURA-BLOK Supports

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
156
DURA-BLOK™ Rooftop Supports
DB DS SERIES
SUPPORT BASES WITH B22SH
VERTICAL & HORIZONTAL CHANNEL MEMBERS
• Product is shipped unassembled.
• Two (2) DB20 bases with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) - Bases are 5” (127.0mm) high x 6” (152.4mm
long.
Vertical & Horizontal Riser Channels (SH Style) - 15/8” (41.3mm) x 15/8” (41.3mm) x 12 ga. (2.6mm)
Fittings & Hardware - Electro-Plated Steel
• 100% recycled rubber, UV resistant.
• Ultimate Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*
• DURA-BLOK DB DS-Series channel support with risers is designed for superior support of piping systems, cable tray, HV
systems and many other applications. The DURA-BLOK is UV resistant and suitable for installation on any type of roofing m
surfaces.
(For pipe straps/clamps, rollers and roller supports that can be used with these DURA-BLOK supports, see page 158)

* General Note: Consult roofing manufacturer or engineer for roof load capacity.
The weakest point may be the insulation board beneath the rubber membrane.
Reference page 152 for general fitting and standard finish specifications.
156

DB2318DS
DB2924DS

B + 4.5”
(114mm)

Height
(overal
l)

Length
Width (overall
(overal )
l)
DB5336DS
m) high x 6” (152.4mm) wide x 20.2” (513.1mm)

stems, cable tray, HVAC equipment, walkway

any type of roofing material or other flat

see page 158)

Strut Systems
 DURA-BLOK™ R

A Min. to Max. B
Part No. In. (mm) In. (mm)

DB2318DS 10.56” to 20.75” (268 to 527) 131/2” (343)

DB2918DS 10.56” to 26.75” (268 to 679) 131/2” (343)
DB4118DS 10.56” to 38.75” (268 to 984) 131/2” (343)
DB5318DS 10.56” to 50.75” (268 to 1289) 131/2” (343)
DB2324DS 10.56” to 20.75” (268 to 527) 191/2” (495)
DB2924DS 10.56” to 26.75” (268 to 679) 191/2” (495)
DB4124DS 10.56” to 38.75” (268 to 984) 19 /2”
1 (495)
DB5324DS 10.56” to 50.75” (268 to 1289) 191/2” (495)
DB2336DS 10.56” to 20.75” (268 to 527) 311/2” (800)
DB2936DS 10.56” to 26.75” (268 to 679) 311/2” (800)
DB4136DS 10.56” to 38.75” (268 to 984) 311/2” (800)
DB5336DS 10.56” to 50.75” (268 to 1289) 31 /2”
1 (800)
DB2348DS 10.56” to 20.75” (268 to 527) 431/2” (1105)
DB2948DS 10.56” to 26.75” (268 to 679) 431/2” (1105)
DB4148DS 10.56” to 38.75” (268 to 984) 431/2” (1105)
DB5348DS 10.56” to 50.75” (268 to 1289) 431/2” (1105)
DURA-BLOK Supports

Height (overall) Width (overall) Length (overall) Wt./Each

Part No. In. (mm) In. (mm) In. (mm) lbs. (kg)

DB2318DS 23” (584) 255/8” (651) 20.2” (513) 33.31 (15.11)

DB2918DS 29” (736) 255/8” (651) 20.2” (513) 35.00 (15.88)
DB4118DS 41” (1041) 255/8” (651) 20.2” (513) 38.40 (17.42)
DB5318DS 53” (1346) 255/8” (651) 20.2” (513) 41.80 (18.96)
DB2324DS 23” (584) 315/8” (803) 20.2” (513) 34.15 (15.49)
DB2924DS 29” (736) 315/8” (803) 20.2” (513) 35.84 (16.26)
DB4124DS 41” (1041) 31 /8”
5 (803) 20.2” (513) 39.25 (17.80)
DB5324DS 53” (1346) 315/8” (803) 20.2” (513) 42.65 (19.34)
DB2336DS 23” (584) 435/8” (1108) 20.2” (513) 35.84 (16.26)
DB2936DS 29” (736) 435/8” (1108) 20.2” (513) 37.56 (17.03)
DB4136DS 41” (1041) 435/8” (1108) 20.2” (513) 40.95 (18.57)
DB5336DS 53” (1346) 43 /8”
5 (1108) 20.2” (513) 44.34 (20.11)
DB2348DS 23” (584) 555/8” (1415) 20.2” (513) 37.55 (17.03)
DB2948DS 29” (736) 555/8” (1415) 20.2” (513) 39.25 (17.80)
DB4148DS 41” (1041) 555/8” (1415) 20.2” (513) 42.65 (19.34)
DB5348DS 53” (1346) 555/8” (1415) 20.2” (513) 46.03 (20.88)
 A = Adjustable height from bottom of DURA-BLOK to top of horizontal channel. B = Space be
horizontal channel.
Height (overall) = Distance from bottom of DURA-BLOK to top of upright channel. Width (ove
outside-to-outside of DURA-BLOK supports.
Length (overall) = Distance from end-to-end of DURA-BLOK supports.
Reference page 152 for general fitting and standard finish specific
Strut Systems 157
DURA-BLOK™ Rooftop Supports
DB DS SERIES cont.
ontal channel. B = Space between fittings that support

upright channel. Width (overall) = Distance from

orts.
g and standard finish specifications.
7
 DURA-BLOK™ Rooftop Supports
DBR SERIES
SUPPORT BASES WITH B42 CHANNEL & PIPE ROLLER
• Base with 14 ga. (1.9mm) galvanized channel 1” high (25.4mm) tall - see chart for height, width and length.
• 100% recycled rubber, UV resistant.
• Load Rating: (See Chart Below)*
• DURA-BLOK DBR-Series support is designed to support pipe where longitudinal movement is expected. The DUR
approved for installation on any type of roofing material or other flat surfaces.

DBR4-6

DBR16-20
Roller Part Block & Channel -Height x Width x Length Height** Wt./Each
Part No. No.† In. (mm) In. (mm) Lbs. (kg)

DBR2-31/2 B3126-2 to 31/2 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 7.09” (180) 5.28 (2.39)
DBR4-6 B3126-4 to 6 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 7.09” (180) 10.63 (4.82)
DBR8-10 B3126-8-10 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 8.34” (212) 15.99 (7.25)
DBR12-14 B3126-12-14 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 9.38” (238) 21.34 (9.68)
DBR16-20 B3126-16-20 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 9.78” (248) 26.70 (12.11)
† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to bottom of pipe/tubing.
DURA-BLOK Supports

BTS

B104

B22TH B22SH
Compatible Components Available to make DURA-BLOK bases more versati
B101
TN Nuts HHCS
B634 B3124
Series B240
Serie
B2000 Series B3126 Series
BVT Series

Above rollers can be mounted on DB Series, DB6 Series, and DB10 Series units.
 Reference page 152 for general fitting and standard finish specifications.
158

B218

B219 Series

B379

B479
 width and length.

ent is expected. The DURA-BLOK is UV resistant and

Load Rating
Lbs. (kN)

500 (2.22)
500 (2.22)
1000 (4.45)
1000 (4.45)
1000 (4.45)
bing.

B22SH
K bases more versatile

B2400
Series
B3126 Series

0 Series units.
 Strut Systems

B479
 DURA-BLOK™ R
R
DURA-BLOK Supports

Strut Systems
 DURA-BLOK™ Rooftop Supports
ROOFTOP APPLICATIONS

159
 DURA-BLOK™ Rooftop Supports
ROOFTOP SUPPORTS IN WALKWAY APPLICATIONS

• Safety Grating is available with slip resistant GRATE-LOCK™, helping provide a safe walkway for foot traffic
• Easy to install, elevated design, creates an identifiable path for foot traffic helping prevent wear and tear to
• The cross-over design offers safe passage over existing cabling, piping, cable tray or any other interference
• The self cleaning pattern allows water and dirt to easily flow through, helping make the grating an ideal wal
• Handrail options are available
DURA-BLOK Supports
160
a safe walkway for foot traffic on the roof.
lping prevent wear and tear to the roof surface.
tray or any other interference on the rooftop.
make the grating an ideal walkway in all weather conditions.
Strut Systems
 DURA-BLOK™ Rooftop Supports
DURA-BLOK Supports

Strut Systems
DURA-BLOK™ Rooftop Supports

161
 A complete system of top quality, time saving products, designed for surface metal raceways, lighting
Innovative designs offer many installation advantages. B-Line’s surface raceways are U.L. listed and m
National Electrical Code, Article 352.
Surface Raceways
Our channel provides structural support in addition to a raceway system.
For U.L. wire fill see chart on page 230-231.
Cable Supports
A full range of clamps and saddles are offered in porcelain, thermoplastic elastomer and maple.
Our maple clamps, Insulclamp™ cable clamps and porcelain saddles are furnished complete with steel
Everdur hardware where required.
Materials & Finishes*
Steel products are made from low carbon steel strips or plates. Porcelain saddles and clamps are mad
glazed (porcelain dielectric strength is 50 volts per mil). Maple clamps are made from kiln-dried mapl
impregnated.

Finish
Code Finish Specification

PLN Plain ASTM A1011

33,000 PSI min. yield
ZN Electro-Plated Zinc ASTM B633 SC3 Type III
GRN DURA-GREEN™
GALV Pre-Galvanized ASTM B653
YZN Yellow Zinc Chromate ASTM B633 SC3 Type II
*Unless otherwise noted.
Design Load
Design load data published includes a Safety Factor of 3.0 (Safety Factor = Ratio of ultimate load to t
Electrical Accessories
U.L. listed raceway channels:
B11, B11KO6 B32, B32KO6
B12, B12KO6 B42, B42KO6
B22, B22KO6 B52, B52KO6
B24, B24KO6 B54, B54KO6
B26, B26KO6 B56, B56KO6

U.L. File No. E29637

In all cases, the snap-in closure strip is required to complete raceway enclosure.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

162
ace metal raceways, lighting and cable supports.
ceways are U.L. listed and meet the requirements of the

elastomer and maple.

rnished complete with steel clamps (electro-plated) and

saddles and clamps are made by dry process and white

e made from kiln-dried maple wood, paraffin

= Ratio of ultimate load to the design load).

ensions are in millimeters.

Strut Systems
 (11)
(1)
(1) or (1A) (Not (1)
(6)

(3) or
(10)
(13)
(3A) (Not Shown)

1 1A 2 3 3A 4
SELECTION CHART
Channel Channel Channel Fixture Connection Internal Straight
Number Depth Hanger Hanger Hanger End Cap End Cap Splice
B22A 31/4” (82.5) B616-22A* B241S* B616S-22A* B205 or B285 B392-22** B766-22 (2)
B285
B11 31/4” (82.5) B616-22A* B241S* B616S-22A* B222 B392-11** B766-11
B12 27/16” (61.9) B616-22A* B241S* B616S-22A* B221 B392-12** B766-12
B22 B24 15/8” (41.3) B616* B216S* B616S* B205 or B285 B392-22** B766-22
B616TG* B223 or B286
B26 15/8” (41.3) B616* – – – B392-22** –
B32 13/8” (34.9) B616* B216S* B616S* B206 B392-32** B766-32
B616TG*
B42 1” (25.4) B616* B215S* B616S* B203 – B766-42
B616TG*
B52 / ”
13 16 (20.6) B616* B215S* B616S* B220 or B283 – B766-52
B54 B616TG* B204 or B284
B56 / ”
13 16 (20.6) B616* B215S* B616S* – – B766-56
B616TG*
Electrical Accessories

*Specify Hanger Rod or Conduit Size.

**Specify Conduit Size
OTHER ITEMS SHOWN ON ILLUSTRATION
B217-20 (6) B351L (7) B755 (8) B751
Snap-in Closure Strip Beam Clamp Beam Clamp Beam Clamp

B465 (10) B750 (11) B447 B447A (12) B719

H.I.D. Fixture Hanger Beam Clamp Conduit Connection Plate B718 Series Junction Box
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems 163

(9)

(8)

(5) (4)

(13)

Shown)

(2)
 (7)

4 5
Internal Straight Internal Tee
Splice Splice
B766-22 (2) B768-22 (2)

B766-11 B768-11
B766-12 B768-12
B766-22 B768-22

– –
B766-32 B768-32

B766-42 B768-42

B766-52 B768-52

B766-56 –
B751 (9)
Beam Clamp

B719 (13)

B718 Series Junction Box

Fill Chart on pages 230 - 231.
B616-9/16 CHANNEL HANGER B616-7/8 CHANNEL HANGER
• Design Load 250 Lbs. (1.11 kN) • Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3 • Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN) • Maximum design load 50 Lbs. (.22 kN)
whenused as a fixture support when used as a fixture support
• Includes: • Material: 16 Gauge (1.5)
2 pcs. 3/8” Flat Washers for use with 3/8” ATR • Standard finish: ZN
• Material: 16 Gauge (1.5) • Wt./C 25 Lbs. (11.3 kg) 7/8” (22.2) Dia. For
• Standard finish: ZN 9
/16” (14.3) Dia. For /2” (15) Conduit
1

• Wt./C 25 Lbs. (11.3 kg) 1/2” ATR 11/2”

11/2” (38.1)
(38.1) 31/8”
31/8” (79.4)
(79.4)

B616S-9/16 FLUORESCENT FIXTURE HANGER WITH STUD B616S-7/8 FLUORESCENT FIXTURE HANGER WITH STU
• Design Load 150 Lbs. (.67 kN) • Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3 • Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN) • Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support when used as a fixture support
• Allows more than 1/2” (12.7) space between channel and • Allows more than 1/2” (12.7) space between channel and
fixture fixture
• Includes: • Standard finish: ZN
2 pcs. 3/8” Flat Washers for use with 3/8” ATR • Wt./C 30 Lbs. (13.6 kg)
• Material:16 Gauge (1.5) 11/2”
• Standard finish: ZN 11/2” (38.1)
• Wt./C 30 Lbs. (13.6 kg) (38.1)
31/8”
31/8” (79.4)
(79.4)

B616-22A-9/16 CHANNEL HANGER B616-22A-7/8 CHANNEL HANGER

• Design Load 250 Lbs. (1.11 kN) • Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3 • Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN) • Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support when used as a fixture support
• Includes: • Material: 14 Gauge (1.9)
2 pcs. 3/8” Flat Washers for use with 3/8” ATR • Standard finish: ZN
• Material: 14 Gauge (1.9) • Wt./C 44 Lbs. (19.9 kg)
• Standard finish: ZN /8 ”
7
(22.2) Dia. For
• Wt./C 44 Lbs. (19.9 kg) 11/2”/2” (15) Conduit
1

/16”
9
(14.3) Dia. For (38.1)
1
1 /2” /2” ATR
1
51/8”
(38.1) (130.2)
51/8”
(130.2)
Electrical Accessories

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages
164
ER
kN)

bs. (.22 kN)

ort

(22.2) Dia. For

FIXTURE HANGER WITH STUD

N)

bs. (.22 kN)

ort
space between channel and

HANGER
kN)

bs. (.22 kN)

ort
. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems
 B616S-22A-9/16 FLUORESCENT FIXTURE HANGER WITH
STUD
• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Includes:
2 pcs. 3/8” Flat Washers for use with 3/8” ATR
• Allows more than 1/2” (12.7) space
• between channel and fixture 11/2”
• Material: 14 Gauge (1.9) (38.1)

Standard finish: ZN
• Wt./C 49 Lbs. (22.2 kg) 51/8”
(130.2)

B616TG-9/16 FLUORESCENT FIXTURE

HANGER FOR 1/2” (15) KNOCKOUT
9/16” (14.3) Dia.
• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3 For 1/2” ATR

11/2”
• Maximum design load
50 Lbs. (.22 kN) when used as a (38.1)

fixture support
• Includes:
31/8”
2 pcs. 3/8” Flat Washers for (79.4)
use with 3/8” ATR
• Design Load 150 Lbs. (.67 kN)
• Allows more than 1/2” (12.7) space between channel and
fixture
• Material: 16 Gauge (1.5)
• Standard finish: ZN
• Wt./C 32 Lbs. (14.5 kg)
 B216S
CHANNEL HANGER
• Can be used with 3/8” & 1/2” threaded rod or
3
/8” & 1/2” conduit
• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• For use with B22, B24, B26 & B32 Channels
• Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW
for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit
• Material: 16 Gauge (1.5)
7/8” (22.2) Dia.
• Standard finish: ZN
• Wt./C 38 Lbs. (17.2 kg)
31/2”
(88.9)
121/32”
(42.0)
Electrical Accessories

B241S
CHANNEL HANGER
• Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2”
• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• For use with B11 & B12 Channels
• Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1)
One (1) 5/8” FW for use with 3/8” conduit

• Material: 16 Gauge (1.5)

• Standard finish: ZN
• Wt./C 47 Lbs. (21.3 kg)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems 165
 B616S-22A-7/8 FLUORESCENT FIXTURE HANGER WITH
STUD
• Design Load 150 Lbs. (.67 kN)
• Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN)
when used as a fixture support
• Allows more than 1/2” (12.7) space between channel and
fixture
• Material: 14 Gauge (1.9)
11/2”
• Standard finish: ZN (38.1)
• Wt./C 49 Lbs. (22.2 kg)
51/8”
(130.2)

B215S
CHANNEL HANGER
• Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” cond
• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• For use with B42, B52, B54 & B56 Channels
• Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW
for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit
7/8” (22.2) Dia.
• Material: 16 Gauge (1.5)
• Standard finish: ZN
• Wt./C 31 Lbs. (14.0 kg) ” 23/16
(55.6 )
121/32”
(42.0)
 51/16
”
(128.6
)

121/32
”
(42.0)

uit

B241S
CHANNEL HANGER
• Can be used with 3/8” & 1/2” threaded rod or 3/8” & 1/2” conduit
• Design Load 250 Lbs. (1.11 kN)
• Safety Factor of 3
• For use with B11 & B12 Channels
• Hardware included:
One (1) 3/8” x 11/2” FFW for use with 3/8”-16 ATR One (1) 1/2” FW for use with 1/2”-13 ATR
One (1) 5/8” FW for use with 3/8” conduit

• Material: 16 Gauge (1.5) 7

/8 ” (22.2) Dia.
• Standard finish: ZN
• Wt./C 47 Lbs. (21.3 kg)
d standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
165
B390S B390BX
360° SWIVEL CHANNEL CONNECTOR 360° SWIVEL BOX CONNECTOR
• Design Load 250 Lbs. (1.11 kN) • Design Load 250 Lbs. (1.11 kN) for Connector Fitting only
• Safety Factor of 3 • Safety Factor of 3
• Maximum design load 50 Lbs. (.22 kN) • Design Load 50 Lbs. (.22 kN) when used as illustrated or for
when used as a fixture support use as a fixture support
• Swings 15° in 360° plane • Swings 15° in 360° plane
• Includes: • Includes:
2 pcs. SN224-3/4”WO Stud Nut 2 pcs. 1/4”-20 Square Nut 1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer
1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer • Fits on 4” box
• Standard finish: ZN • Standard finish: ZN
• Wt./C 71 Lbs. (32.2 kg) • Wt./C 55 Lbs. (24.9 kg)

B465 B436
H.I.D. FIXTURE HANGER FLUORESCENT FIXTURE NUT
• Design Load 250 Lbs. (1.11 kN) • Standard finish: ZN
• Safety Factor of 3 • Wt./C 2 Lbs. (.9 kg)
• Swings 15° in 360° plane 21/8” Tapped For 1/4”-20 Screw
• Includes: (54.0)

1 pc. 3/4” (20) to 1/2” (15) Conduit Reducer

• Standard finish: ZN
• Wt./C 95 Lbs. (43.1 kg)
21/16”
(52.4)
33/4” B436S
(95.2) FLUORESCENT FIXTURE STUD NUT
• Bolt size: 1/4” x 11/4”
• Standard finish: ZN
• Wt./C 4 Lbs. (1.8 kg)
• Design Load 1
1 /4”
250 Lbs. (1.11 kN)
(31.7)
Safety Factor of 3

B460 B464
FLUORESCENT FIXTURE HANGER FLUORESCENT
1
/4” x 1” Round Head
• Hanger is shipped flat and requires FIXTURE HANGER Machine Screw and
1/4” x 1” Round Head
field bending as shown • Hanger is shipped flat and Square Nut Included

• Allows more than /2” (12.7)

1 Machine Screw and
requires field bending as shown
space between channel and fixture Square Nut Included
• Allows more than 1/8” (3.2) space A
• Material: 18 Gauge (1.2) between channel and fixture
• Standard finish: ZN • Material: 18 Gauge (1.2)
A • Standard finish: ZN
9/ ” 15/8” 1
/4” x 3/4”
Carriage Bolt 15/8”

32 (7.1) (41.3) and Square Nut Included (41.3)

Square Hole
Part No. For Channel Size A Wt./C

Part No. For Channel Size A

Lbs. kg B464-32 B32 11/2”

 B460-22 B22, B24, B26, B32 21/8” (57.5) 17 (7.7) B464-22 B22, B24, B26 13/4”
B460-12 B12 2 /16” (79.5) 20 (9.1)
15 B464-12 B12 29/16”
B460-11 B11 33/4” (101.6) 23 (10.4) B464-11 B11 33/8”
Electrical Accessories

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages
166
OR
N) for Connector Fitting only

when used as illustrated or for

it Reducer

UD NUT

1
1 /4”

ound Head
rew and
Square Nut Included

n
ace A

15/8”
(41.3)

A Wt./C
Lbs. kg
(40.6) 17 (7.7)
 (47.4) 18 (8.1)
(66.0) 21 (9.5)
(91.4) 24 (10.9)

U.L. Wire Fill Chart on pages 230 - 231.

Strut Systems
B217-20 B217P B217-24
SNAP CLOSURE STRIP FOR ALL PLASTIC SNAP CLOSURE STRIP FOR SNAP CLOSURE STRIP FOR ALL 15/8”
15/8” (41.3) WIDE CHANNELS ALL 15/8” (41.3) WIDE CHANNELS (41.3) WIDE CHANNELS
• Refer to Raceway Fill Chart Pg. 214- • Refer to Raceway Fill Chart Pg. 214-215 • Refer to Raceway Fill Chart Pg. 214-215
215 • Standard finishes: Green (GRN) or Gray • For use with 7 or fewer conductors no
• Material: 20 Gauge (.9) (GRY) Plastic larger than #12 AWG
• Standard finishes: GRN, GALV, YZN • Standard length: 120” (3.05m) • Material: 24 Gauge (.6)
• Standard length: 120” (3.05m) • Wt./CFT 9.2 Lbs. (4.2 kg) • Standard finishes: GRN, GALV, YZN
• Wt./CFT 36 Lbs. (16.3 kg) 17/16” • Standard length: 120” (3.05m)
17/16” (36.5) • Wt./CFT 28 Lbs. (12.7 kg)
(36.5) / 8”
5
(15.9) 113/32”
19/32” (35.7)
1/2”
(15.1) (12.7)
15
/32” (11.9)
9
/32” (7.1)

B516 B516S
SNAP-IN OUTLET BOX OUTLET BOX
• Provided with #10-32 tapped hole for grounding strap • Duplex cover plate included
• Duplex cover plate included • Receptacle not furnished
• Receptacle not furnished • Includes:
• Requires ground wire installation for 2 pcs. 1/4”-20 Flat Head Machine Screws
use with UL listed channel raceway system 2 pcs. N224WO Channel Nuts 17/8”
• Standard finish: GALV • Standard finish: ZN 4 / ”
1 16
(47.6)

• Wt./C 72 Lbs. (32.6 kg) 17/8” • Wt./C 98 Lbs. (44.4 kg) 21/8”
41/16” (47.6) (103.2)
(103.2) (54.0)
21/8” 1
/2” (15) & 3/4” (20)
(54.0)
Concentric KO’S
/2” (12.7) x 2” (25.4
1

1
/2” (12.7) x 2” (25.4) Slot 6”
1
/2” (15) & 3/4” (20) 15/8” (152.4)
Concentric KO’S (41.3)
B217-20
Closure Strip 4”
(101.6)

B203 THRU B206 B283 THRU B286

B220 THRU B223 A END CAPS
X TYPE END CAPS • Material: 12 Gauge (2.6)
• Material: 12 Gauge (2.6) • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN, HDG, SS4 A
B

Part No. Use With A Wt./C

Lbs. kg

B203 B42 1.015” (25.8) 6 (2.7)

B204 B54 .827” (21.0) 5 (2.2)
B205 B22 1.640” (41.6) 10 (4.5) Part No. Use With A B
B206 B32 1.390” (35.3) 8 (3.6)
B220 B52 .827” (21.0) 4 (1.8) B283 B52 119/32” (40.5) 25/32”
B221 B12 2.452” (62.3) 15 (6.8) B284 B54 & B56 119/32” (40.5) 25/32”
B222 B11 3.265” (82.9) 20 (9.1) B285 B22 119/32” (40.5) 119/32”
 B223 B24 1.640” (41.6) 10 (4.5) B286 B24 & B26 119/32” (40.5) 119/32”

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Electrical Accessories

Strut Systems 167

RE STRIP FOR ALL 15/8”
HANNELS
eway Fill Chart Pg. 214-215
7 or fewer conductors no
2 AWG
Gauge (.6)
shes: GRN, GALV, YZN
gth: 120” (3.05m)
bs. (12.7 kg)

crews
17/8”
(47.6)

21/8”

” (25.4

U B286
PS
Gauge (2.6)
es: ZN, GRN

B Wt./C
Lbs. kg

(19.8) 6 (2.7)
(19.8) 6 (2.7)
(40.5) 13 (5.9)
 (40.5) 14 (6.3)

) Slot

Chart on pages 230 - 231.

B447 B447A
CONDUIT CONNECTION PLATE FOR 1/2” (15) CONDUIT CONDUIT CONNECTION PLATE FOR 3/4” (20) CONDUIT
• Includes: • Includes:
2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO 2 pcs. 1/4”-20 Flat Head Machine Screws 2 pcs. N224WO
Channel Nuts Channel Nuts
• Material: 16 Gauge (1.5) 2 Holes • Material: 16 Gauge (1.5)
• Standard finish: ZN 9/32” (7.1) Dia. • Standard finish: ZN 2 Holes

• Wt./C 35 Lbs. (15.9 kg) • Wt./C 35 Lbs. (15.9 kg) 9/32” (7.1) Dia.

7
/8” (22.2) Dia. 5/8” 13/32” (27.8) Dia. 5
/8” (15.9)
(15.9) 51/8”
51/8” (130.2)
(130.2)

B392-32 SERIES B392-22 SERIES

CONNECTION END CAP CONNECTION END CAP 15/8”
• Includes: 5 • Includes: (41.3)

1 pc. 1/4”-20 Square Nut 1 /8” 1 pc. 1/4”-20 Square Nut 9/32” (7.1) Dia

1 pc. B436S Fixture Stud Nut (41.3) 1 pc. B436S Fixture Stud Nut
• Material: 11 Gauge (3.0) 9/32” (7.1) Dia.
• Material: 11 Gauge (3.0) 15/8” A Dia.

• Standard finish: ZN 13/8” A Dia. • Standard finish: ZN (41.3)

(34.9) 3
/ 4” (19.0)
3
/ 4”(19.0)

Conduit
Part No. A Size
Wt./C
Part No. A Conduit Size Lbs. kg
B392-22-1/2 7
/8” (22.2) /2” (15)
1

B392-32-1/2 7
/8” (22.2) 1
/2” (15) 20 (9.1) B392-22-3/4 11/16” (27.0) /4” (20)
3

B392-32-3/4 1 /16”
1 (27.0) 3
/4” (20) 19 (8.6) B392-22-1 1” PIPE THREAD 1” (25)

B392-12 SERIES B392-11 SERIES

CONNECTION END CAP CONNECTION END CAP
• Includes: • Includes:
1 pc. 1/4”-20 Square Nut 15/8” 1 pc. 1/4”-20 Square Nut
• 1 pc. B436S Fixture Stud Nut (41.3) 1 pc. B436S Fixture Stud Nut 15/8”
• Material: 11 Gauge (3.0) 9/32” (7.1) Dia. • Material: 11 Gauge (3.0) (41.3)

Standard finish: ZN • Standard finish: ZN 9/32” (7.1) Dia.

27/16” A Dia. A Dia.

(61.9) 31/4”
3
/ 4”(19.0) (82.5)
3
/4” (19.0)

Conduit Wt./C Conduit

Part No. A Size Lbs. kg Part No. A Size

B392-12-1/2 /8”
7 (22.2) 1
/2” (15) 27 (12.2) B392-11-1/2 7
/8” (22.2) /2”
1

B392-12-3/4 11/16” (22.7) 3

/4” (20) 26 (11.8) B392-11-3/4 11/16” (27.0) /4”
3

B392-12-1 1” PIPE THREAD 1” (25) 23 (10.4) B392-11-1 1” PIPE THREAD 1”

.
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Electrical Accessories

168 S
E FOR 3/4” (20) CONDUIT

Screws 2 pcs. N224WO

9)

SERIES
D CAP 15/8”
(41.3)

9/32” (7.1) Dia

ure Stud Nut

0) 15/8” A Dia.

ZN (41.3)

9.0)

Conduit Wt./C
Size Lbs. kg

(15) 21 (9.5)
(20) 20 (9.1)
(25) 17 (7.7)

SERIES
N END CAP
des:
Square Nut
Stud Nut 15/8”
(3.0) (41.3)

9/32” (7.1) Dia.

a.
”
5)
9.0)

Conduit Wt./C
Size Lbs. kg

(15) 36 (16.3)
(20) 33 (14.9)
(25) 32 (14.5)
pages 230 - 231.

Strut Systems
 B718 B718-1 B718-2 B718-2 B718-3 END
THRU BOX 90° TEE
UNIVERSAL JUNCTION BOX SELECTION GUIDE
• Assemble B719 Hubs into B718 square knockouts Box Dimension:
• Designed for use with B22, B24 & B26 Channel 21/2” Deep x 51/8” Square
• B718 Includes:
1 pc. Junction Box only 1 pc. Cover only
2 pcs. #10-20 Round Head Machine Screws
• Standard finish: ZN
• Wt./C 180 Lbs. (81.6 kg)
B719AL
UNIVERSAL JUNCTION BOX HUB
• B719AL Includes:
1 pc. B719AL Hub only
1 pc. B436S Fixture Stud Nut 1 pc. 1/4”-20 Square Nut
2 pcs. #10-24 Self Tapping Screws 2 pcs. Rubber Caps
• Material: Aluminum
• Wt./C 25 Lbs. (11.3 kg)

Wt./C
Part No. Includes Lbs. kg

B718-1 1 B718 & 1 B719 205 (93.0)

B718-2 1 B718 & 2 B719 230 (104.3)
B718-3 1 B718 & 3 B719 255 (115.6)
B718-4 1 B718 & 4 B719 280 (127.0)

B518-1 THRU B518-4

UNIVERSAL JUNCTION BOX AND HUBS
• Channel Connection Kits as shown in the chart above
B518-1 B518-2 THRU
• Includes: END BOX
1 pc. Junction Box with Screws 1 pc. Box Cover
• Standard finish: ZN
Electrical Accessories
 SELECTION GUIDE

CHANNEL CONNECTION KIT

• For use with B22, B24 & B26 Channels.
• Box Dimension: Standard 4” Octagon Box
• Includes:
1 pc. B392-22-3/4 End Connection (See page 160) 1 pc. 3/4”
(20) Insulated Chase Nipple
1 pc. 3/4” (20) Lock Nut
3/4” (19.1) Conduit Knockouts
• Standard finish: ZN

Channel Connection Kits Wt./C

Part No. Included Lbs. kg

B518-1 1 106 (48.1)

B518-2 2 137 (62.1)
B518-3 3 162 (78.5)
B518-4 4 192 (87.1)
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems 169
18-2 B718-2 B718-3 END B718-4 CROSS
90° TEE
N GUIDE
on:
51/8” Square

B518-3
B518-2 90° B518-4 CROSS
TEE
 SELECTION GUIDE

nduit Knockouts

ire Fill Chart on pages 230 - 231.

 B766 SERIES B767 SERIES
STRAIGHT STRUT JOINER 90° ELBOW STRUT JOINER
• Includes: 2 Cam Screws • Includes: 2 Cam Screws
• Material: 12 Gauge (2.6) • Material: 12 Gauge (2.6)
• Standard finish: ZN • Standard finish: ZN
41/2” Note: B767-22
(114.3) (Cast Aluminum Fitting) does not require miter cutting of chann
7
/8” (22.2) as
shown in drawing. 25/16” 25/ ”
(58.7) 16

(58.7)

B768 SERIES B769 SERIES

TEE STRUT JOINER CROSS STRUT JOINER
• Includes: 3 Cam Screws • Includes: 4 Cam Screws
• Patented • Patented
• Material: 12 Gauge (2.6) • Material: 12 Gauge (2.6)
• Standard finish: ZN • Standard finish: ZN
41/2” 41/2”
(114.3) (114.3)
31/16” 41/2”
(77.8) (114.3)

Wt./C Part No. For Channel Size Lbs. kg Wt./C Part No. For Channel Size Lbs. kg

B768-11 B11 142 (64.4) B769-11 B11 148 (67.1)

B768-12 B12 112 (50.8) B769-12 B12 120 (54.4)
B768-22 * B22 & B24 79 (35.8) B769-22 * B22 & B24 87 (39.4)
B768-26 B26 79 (35.8) B769-26 B26 93 (42.2)
B768-32 B32 72 (32.6) B769-32 B32 78 (35.4)
B768-42 B42 62 (28.1) B769-42 B42 65 (29.5)
B768-52 B52 & B54 57 (25.8) B769-52 B52 & B54 58 (26.3)
B768-56 B56 60 (27.2) B769-56 B56 62 (28.1)
 Wt./C
Part No. For Channel Size Lbs. kg

B766-11 B11 94 (42.6)

B766-12 B12 72 (32.6)
B766-22 * B22 & B24 50 (22.7)
B766-26 B26 53 (24.0)
B766-32 B32 44 (19.9)
B766-42 B42 34 (15.4)
B766-52 B52 & B54 28 (12.7)
B766-56 B56 31 (14.0)
Wt./C
Part No. For Channel Size Lbs. kg

B767-11 B11 74 (33.5)

B767-12 B12 56 (25.4)
B767-22 * B22 & B24 39 (17.7)
B767-26 B26 41 (18.6)
B767-32 B32 34 (15.4)
B767-42 B42 27 (12.2)
B767-52 B52 & B54 23 (10.4)
B767-56 B56 25 (11.3)
Electrical Accessories

* Cast Aluminum parts

Note: Strut joiners are not for structural support. A channel support is recommended within 24” (609 mm) of ea
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages
170
ot require miter cutting of channel

6” 25/ ”

annel Size Lbs. kg

148 (67.1)
120 (54.4)
87 (39.4)
93 (42.2)
78 (35.4)
65 (29.5)
58 (26.3)
62 (28.1)
ended within 24” (609 mm) of each joint.
s. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems
B166 71/4” B166-46 71/4”
FOUR HOLE (184.1) FOUR HOLE (184.1)

SPLICE CLEVIS SPLICE CLEVIS ASSEMBLY

• Includes: • Requires ground wire for use with
1 Splice Clevis A • UL listed channel raceway system A
4 pcs. 1/4”-20 Flat Head Includes:
Machine Screws
111/16” 1 Splice Clevis
4 pcs. N224WO Channel Nuts (42.9) 1 pc. B466W tapped plate 111/16
• Material: 16 Gauge (1.5) 4 pcs. 1/4”-20 Flat Head Machine Screws (42.9)

• Standard finishes: ZN, GRN • Material: 16 Gauge (1.5)

• Standard finishes: ZN, GRN

Wt./C For Channel Size Lbs. kg

Part No. A Part No. A

B166-11 31/4” (82.5) B11 128 (58.0) B166-46-11 31/4” (82.5)

B166-12 27/16” (61.9) B12 108 (49.0) B166-46-12 27/16” (61.9)
B166-22 15/8” (41.3) B22, B24, B26 91 (40.3) B166-46-22 15/8” (41.3)
B166-32 13/8” (34.9) B32 83 (37.6) B166-46-32 13/8” (34.9)
B166-42 1” (25.4) B42 75 (34.0) B166-46-42 1” (25.4)
B166-52 13
/16” (20.6) B52, B54, B56 71 (32.2) B166-46-52 13
/16” (20.6)

B166CL B466W LATE B466S

SPLICE CLEVIS CLIP TAPPED SPLICE ead Machine STUD SPLICE PLATE
• Use to cover gap between strut • Includes: (1.9) • Includes:
kg)
• Material: 18 Gauge (1.2) 4 pcs. /4”-20 Flat
1
4 pcs. 1/4”-20 Square Nuts
rom ends and rs
• Standard finish: ZN Screws • Material: 14 Gauge (1.9)
• Wt./C 4 Lbs. (1.8 kg) • Material: 14 Gauge • Standard finish: ZN
B166 • Standard finish: ZN • Wt./C 34 Lbs. (15.4 kg)
1”
125/32” • Wt./C 27 Lbs. (12.2 • Studs 13/16” (20.6) from ends and 17/8”
(25.4) • Holes 13/16” (20.6) (47.6) on centers
(45.2) 17/8” (47.6) on cente

B619
KNOCK-OUT PLATE
• Requires ground wire for use with UL
listed channel raceway system
• Includes:
2 pcs. 1/4”-20 Flat Head Machine Screws
2 pcs. N224WO Channel Nuts
• Material: 16 Gauge (1.5)
1
/2” (15) Conduit Knockouts
• Standard finish: ZN
• Wt./C 40 Lbs. (18.1 kg)
61/4”
/32” (7.1) Dia.
9

(158.7) Holes

121/32”
(42.0)
 B619
KNOCK-OUT PLATE
• Requires ground wire for use with UL
listed channel raceway system
B393-1 B589
• Includes: WIRING STUD SPACER CLEVIS
2 pcs. 1/4”-20 Flat Head Machine Screws • Requires ground wire for use with UL • Can be used with B393-1 wiring stu
2 pcs. N224WO Channel Nuts listed channel raceway system • Material: 12 Gauge (2.6)
• Material: 16 Gauge (1.5) • 1
/2” (15) pipe threads • Standard finish: ZN
1
/2” (15) Conduit Knockouts • Material: Cast Aluminum • Wt./C 29 Lbs. (13.1 kg)
• Standard finish: ZN • Wt./C 6 Lbs. (2.7 kg) 2”
1
/2” (15) Pipe Threads 7
/8” (22.2) Dia. (50.8)
• Wt./C 40 Lbs. (18.1 kg) 1
61/4” 9
/32” (7.1) Dia.
1 / 8” 4”
(28.6) (101.6)
(158.7) Holes

1 /32”
21
1
/ 2” (12.7)
(42.0)

P
H

f
Electrical Accessories

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Strut Systems 171
 71/4”
(184.1)

ASSEMBLY
wire for use with
raceway system A

”
ed plate 111/16
Head Machine Screws (42.9)

ge (1.5)
s: ZN, GRN

Wt./C
For Channel Size Lbs. kg

B11 118 (53.5)

B12 98 (44.4)
B22, B24, B26 79 (35.8)
B32 73 (33.1)
B42 65 (29.5)
B52, B54, B56 61 (27.6)

B466S
STUD SPLICE PLATE
• Includes:
4 pcs. 1/4”-20 Square Nuts
• Material: 14 Gauge (1.9)
• Standard finish: ZN
• Wt./C 34 Lbs. (15.4 kg)
• Studs 13/16” (20.6) from ends and 17/8”
(47.6) on centers
 B589
SPACER CLEVIS
• Can be used with B393-1 wiring stud
• Material: 12 Gauge (2.6)
• Standard finish: ZN
• Wt./C 29 Lbs. (13.1 kg)
2”
/8” (22.2) Dia.
7 (50.8)

4”
(101.6)
/ 2”
1
(12.7)

ns. U.L. Wire Fill Chart on pages 230 - 231.

B446A B446B
SWIVEL HANGER (FEMALE ONLY) SWIVEL HANGER (MALE ONLY)
• Design Load: • Design Load:
(3/8)-610 Lbs. (2.71 kN) (3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN) (1/2)-1130 Lbs. (5.02 kN)
• Safety Factor of 3 • Safety Factor of 3
• Standard finish: ZN • Standard finish: ZN
A R 13/4”
13/4” (44.4)
(44.4) R B

B446C B44
SWIVEL HANGER (FEMALE-FEMALE) SWIVEL HANGER (FEMALE-MAL
• Design Load: • Design Loa
(3/8)-610 Lbs. (2.71 kN) (3/8)-610 Lbs. (2.71 k
(1/2)-1130 Lbs. (5.02 kN) (1/2)-1130 Lbs. (5.02 k
• Safety Factor of 3 • Safety Factor of
• Standard finish: ZN • Standard finish: Z
23/4” 23/
(69.8) (69
A
A 1
(25

Wt./C
Part No. A Lbs. kg Part No. A B

B446C-3/8 /8”-16 HN
3
26 (11.8) B446-3/8 /8”-16 HN
3 3
/8”-16 HHCS
B446C-1/2 /2”-13 HN
1
31 (14.0) B446-1/2 /2”-13 HN
1 1
/2”-13 HHCS
B590 B617
FIBER WIRE RETAINER SHOULDER BOLT
• Installation aid for retaining wires before installing snap • Standard finish: ZN
closure strip • Wt./C 6 Lbs. (2.7 kg)
• Wt./C 1 Lb. (.4 kg) 2”
13/8” (50.8)
1 /2”
1
(34.9)
3
/8”-16 Thread Size
(38.1)
1
/32” (.8)

Wt./C
Part No. A R Lbs. kg

B446A-3/8 3
/8”-16 HN /32”
9 (7.1) 13 (5.9)
B446A-1/2 1
/2”-13 HN /8”
3 (9.5) 15 (6.8)
Wt./C
Part No. A R Lbs. kg

B446B-3/8 3
/8”-16 HHCS /32”
9 (7.1) 16 (7.2)
B446B-1/2 1
/2”-13 HHCS /8”
3 (9.5) 20 (9.1)
Electrical Accessories

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages
172 S
B

B446
HANGER (FEMALE-MALE)
• Design Load:
(3/8)-610 Lbs. (2.71 kN)
(1/2)-1130 Lbs. (5.02 kN)
• Safety Factor of 3
• Standard finish: ZN
23/4”
(69.8)
A
1”
(25.4
B

Wt./C
Lbs. kg

28 (12.7)
36 (16.3)
 )
Wire Fill Chart on pages 230 - 231.
Strut Systems
 B4060 THRU B4093
INSULCLAMP CABLE CLAMPS (Replaces porcelain clamps)
• Assembly includes:
1 Insulclamp & 1 pr. zinc plated Pipe Straps with Everdur (Silicon Bronze) Hardware
• The thermoplastic elastomer Insulclamp has a dielectric strength of 640 volts/mil
• The flame retardant one piece design allows for trouble free assembly
• Everdur hardware is non-ferrous and prevents magnetic induction

Hole Dia.
A

Wt./C
Part No. Hole Dia. Lbs. kg A B

B4060 3
/8” (9.5) 25 (11.3)
B4061 1
/2” (12.7) 25 (11.3) 1.36” (34.5) .56” (14.2)
B4062 5
/8” (15.9) 25 (11.3)
B4063 3
/4” (19.0) 37 (16.8)
B4064 7
/8” (22.2) 37 (16.8)
1.86” (47.2) .81” (20.8)
B4065 1” (25.4) 37 (16.8)
B4066 11/8” (28.6) 37 (16.8)
B4067 11/4” (31.7) 58 (26.3)
B4068 13/8” (34.9) 58 (26.3)
2.36” (59.9) 1.06” (26.9)
B4069 11/2” (38.1) 58 (26.3)
B4070 15/8” (41.3) 58 (26.3)
B4071 13/4” (44.4) 76 (34.5)
B4072 17/8” (47.6) 76 (34.5)
2.86” (72.6) 1.31” (33.3)
B4073 2” (50.8) 76 (34.5)
B4074 21/8” (54.0) 76 (34.5)
B4075 21/4” (57.1) 90 (40.8)
B4076 23/8” (60.3) 90 (40.8)
3.36” (85.3) 1.56” (39.6)
B4077 21/2” (63.5) 90 (40.8)
B4078 25/8” (66.7) 90 (40.8)
B4079 23/4” (69.8) 109 (49.4)
B4080 27/8” (73.0) 109 (49.4)
3.86” (98.0) 1.81” (46.0)
B4081 3” (76.2) 109 (49.4)
B4082 31/8” (79.4) 109 (49.4)
B4083 31/4” (82.5) 130 (58.9)
B4084 33/8” (85.7) 130 (58.9)
4.36” (110.7) 2.06” (52.3)
B4085 31/2” (88.9) 130 (58.9)
B4086 35/8” (92.1) 130 (58.9)
B4087 33/4” (95.2) 160 (72.6) 4.86” 2.31”
B4088 37/8” (98.4) 160 (72.6)
(123.4) (58.7)
B4089 4” (101.6) 160 (72.6)
B4090 41/8” (104.8) 160 (72.6)
B4091 41/4” (107.9) 160 (72.6)
B4092 43/8” (111.1) 160 (72.6) 5.24” (133.1) 2.50” (63.5)
B4093 41/2” (114.3) 160 (72.6)
Electrical Accessories

Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

Strut Systems 173

 B
Includes
Clamp No.

B2030

B2011

B2038

B2042

B2046

B2050

B2054

B2058

B2018
ges 230 - 231.
ges 230 - 231.
 B4050 & B4051 PORCELAIN CABLE CHANNEL SADDLE B4094 & B4095 PORCELAIN CABLE RACK SADDLE
• Electrical porcelain has an dielectric strength of • Electrical porcelain has an dielectric strength of 50 volts/m
50 volts/mil • Designed for use with B449 Brackets
R R
A A
21/4” 3”
(57.1) (76.2)

Wt./C
Part No. A R Lbs. kg

B4094 27/8” (73.0) 13/8” (34.9) 67 (30.4)

B4095 37/8” (98.4) 21/8” (54.0) 106 (48.1)
Wt./C
Part No. A R Lbs. kg

B4050 3” (76.2) 13/8” (34.9) 72 (32.6)

B4051 4” (101.6) 21/8” (54.0) 100 (45.3)

B4035A THRU B4035F 4” (101.6) BUS BAR B4037B 1/4” (6.3) x 4” (101.6)
MAPLE CLAMPS BUS BAR SEPARATOR
• Assembly Includes: • Wt./C 9 Lbs. (4.1 kg)
1 pr. Maple Clamps (Paraffin Impregnated) 3 pcs. 1/2” Flat 47/16”
Washers (112.7)
3 pcs. N225WO
3 pcs. SQN-1/2”
3 pcs. ATR-1/2 x L (Length)
• Required number of Separators
• 1/4” (6.3) x 2” (50.8) and 1/4” (6.3) x 6” (152.4)
Bus Bar Maple Clamps available
15/8”
(41.3)
Electrical Accessories
 A
31/2” / 4”
1
(6.3)
(88.9)
C

B
No. of Bus No. of Bars Wt./C
Part No. A B C Separators Per Leg Lbs. kg

B4035A 81/2” (215.9) /4”

1 (6.3) – 1 416
B4035B 91/2” (241.3) /4”
3 (19.0) 2 2 447
B4035C 101/2” (266.7) 11/4” (31.7) 4 3 479
73/8” (187.3)
B4035D 111/2” (292.1) 13/4” (44.4) 6 4 511
B4035E 121/2” (317.5) 21/4” (57.1) 8 5 542
B4035F 131/2” (342.9) 23/4” (69.8) 10 6 574
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages
174 S
ABLE RACK SADDLE
strength of 50 volts/mil
449 Brackets

” (101.6)
 1
/ 4” (6.3)

Wt./C
Lbs. kg

(188.7)
(202.7)
(217.3)
(231.8)
(245.8)
(260.3)
Wire Fill Chart on pages 230 - 231.
Strut Systems
 B4000 THRU B4007
MAPLE CABLE CLAMPS
• Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated)
1 pr. zinc plated Steel Pipe Straps with Everdur Hardware (Silicon Bronze)
• Everdur hardware is non-ferrous and prevents magnetic induction
Note: Maple cable clamps may be replaced with Insulclamps ™ see page 173 for sizes

Clamp No. Wt./C

Part No. Specify Hole Dia. A B (included) Lbs. kg

B4000 0” to 5/8” (0.0 to 15.9) 111/32” (34.1) 2” (50.8) B2010 24 (10.9)

B4001 1
/2” to 1” (12.7 to 25.4) 1 /32”
29 (48.4) 225/32” (70.6) B2012 44 (19.9)
B4002 3
/4” to 11/2” (19.0 to 38.1) 23/8” (60.3) 39/32” (83.3) B2013 58 (26.3)
B4003 11/4” to 13/4” (31.7 to 44.4) 27/8” (73.0) 33/4” (95.2) B2014 66 (29.9)
B4004 11/2” to 21/4” (38.1 to 57.1) 31/2” (88.9) 43/8” (111.1) B2015 86 (39.0)
B4005 2” to 21/2” (50.8 to 63.5) 4” (101.6) 47/8” (123.8) B2016 110 (49.9)
B4006 21/4” to 3” (38.1 to 76.2) 4 /2” (114.3) 53/8”
1 (136.5) B2017 125 (56.7)
B4007 3” to 4” (76.2 to 59/16” (141.3) 67/16” (163.5) B2019 165 (74.8)
101.6)
B4008 THRU B4017
SQUARE MAPLE CABLE SADDLE
• Assembly Includes:
1 Maple Saddle (Paraffin Impregnated) 1 pc. 3/8”-16 Flat Head Machine Screw 1 pc. N228 Channel Nut
• Other sizes available

Specify Wt./C
Part No. Hole Dia. A B Lbs. kg

B4008 0” to 1” (0.0 to 25.4) 3” (76.2) 13/4” (44.4) 35 (15.9)

B4009 1” to 11/2” (25.4 to 38.1) 31/2” (88.9) 2” (50.8) 42 (19.0)
B4010 11/2” to 2” (38.1 to 50.8) 4” (101.6) 21/4” (57.1) 53 (24.0)
B4011 2” to 21/2” (50.8 to 63.5) 41/2” (114.3) 21/2” (63.5) 62 (28.1)
B4012 21/2” to 3” (63.5 to 76.2) 5” (127.0) 23/4” (69.8) 76 (34.5)
B4013 3” to 31/2” (76.2 to 88.9) 51/2” (139.7) 3” (76.2) 85 (38.5)
B4014 31/2” to 4” (88.9 to 101.6) 6” (152.4) 31/4” (82.5) 95 (43.1)
B4015 4” to 41/2” (101.6 to 114.3) 7” (177.8) 33/4” (95.2) 105 (47.8)
B4016 41/2” to 5” (114.3 to 127.0) 71/2” (190.5) 4” (101.6) 115 (52.4)
B4017 5” to 6” (127.0 to 152.4) 9” (228.6) 5” (127.0) 126 (57.1)
Electrical Accessories
 B4033A THRU B4033I
MAPLE CABLE CLAMPS
• Assembly Includes:
1 pr. Maple Clamps (Paraffin Impregnated) 2 pcs. 3/8”-16 Stud Bolts
2 pcs. 3/8”-16 Flat Washers 2 pcs. 3/8”-16 Square Nuts 2 pcs. N228 Channel Nuts
• Other sizes available
Reference page 162 for general fitting and standard finish specifications. U.L. Wire Fill Chart on pages 230 - 231.

Specify Wt./C
Part No. Hole Dia. A Lbs. kg

B4033A 0” to 1” (0.0 to 25.4) 31/2” (88.9) 85 (38.5)

B4033B 1” to 11/2” (25.4 to 38.1) 4” (101.6) 95 (43.1)
B4033C 11/2 to 2” (38.1 to 50.8) 41/2” (114.3) 118 (53.5)
B4033D 2” to 21/2” (50.8 to 63.5) 51/2” (127.0) 162 (73.5)
B4033E 21/2” to 3” (63.5 to 76.2) 6” (152.4) 187 (84.8)
B4033F 3” to 31/2” (76.2 to 88.9) 61/2” (165.1) 209 (94.8)
B4033G 31/2” to 4” (88.9 to 101.6) 7” (177.8) 248 (112.5)
B4033H 4” to 41/2” (101.6 to 114.3) 71/2” (190.5) 270 (122.5)
B4033I 41/2” to 5” (114.3 to 127.0) 8” (203.2) 298 (135.2)
Strut Systems 175
ze)

Specify Hole
Dia.

Screw 1 pc. N228 Channel Nut B

15 /8
”
(41.3 A
)
 15/8”
(41.
3)

nnel Nuts
A
ns. U.L. Wire Fill Chart on pages 230 - 231. Specify
Hole
Dia.

Specify Hole
Dia.

A
 Aluminum & Stainless Steel
Aluminum
Aluminum channels, fittings and accessories offer excellent corrosion resistance and are suitable for man
applications.
Aluminum’s high strength to weight ratio greatly reduces overall cost of installation through ease of han
are extruded from aluminum alloy 6063-T6. Closure strips are extruded from aluminum alloy 6063-T5. Fi
made from aluminum alloy 5052-H32.
Stainless Steel
Where corrosion problems persist and other material and fittings are ineffective, we recommend use of c
steel channels and accessories. Channels and fittings are available in two types of stainless steel:
SS4-AISI Type 304
SS6-AISI Type 316
Fittings
Most fittings, as shown in this catalog, can be supplied in aluminum or stainless steel.
Consult factory for possible minimum production quantities and set-up charges.
Load Data Aluminum
Channel’s approximate load data can be determined by multiplying load data in the steel channel sectio
of 0.38.
Stainless Steel
Channel load data is the same as the data in the steel channel section of this catalog.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
Alum. & Stainless Steel
Materials

176
nce and are suitable for many indoor and outdoor

allation through ease of handling and cutting. Channels

aluminum alloy 6063-T5. Fittings and accessories are

ive, we recommend use of corrosion resistant stainless

pes of stainless steel:

ess steel.
es.

a in the steel channel section of this catalog by a factor

catalog.

sions are in millimeters.

Strut Systems
 Aluminum Channel & Closure Strips
B11AL B12AL B22AL
• Thickness: .105 (2.6 mm) • Thickness: .105 (2.6 mm) • Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m) • Standard Length: 10’ (3.05 m) • Standard Length: 10’ (3.05 m)
and 20’ (6.09 m) and 20’ (6.09 m) and 20’ (6.09 m)
• Material: Aluminum • Material: Aluminum • Material: Aluminum
• Weight: 1.06 Lbs./Ft. (1.58 kg/m) • Weight: .86 Lbs./Ft. (1.28 kg/m) • Weight: .66 Lbs./Ft. (0.98 kg/m)
31/4” 27/16” 15/8”
(82.5) (61.9) (41.3)
15/8” 15/8” 15/8”
(41.3) (41.3) (41.3)

B22AAL B24AL
• Thickness: .105 (2.6 mm) • Thickness: .080 (2.0 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum • Material: Aluminum
• Weight: 1.18 Lbs./Ft. (1.75 kg/m) • Weight: .52 Lbs./Ft. (0.77 kg/m)
31/4” 15/8”
(82.5) (41.3)
15/8” 15/8”
(41.3) (41.3)

B54AL B54AAL
• Thickness: .080 (2.0 mm) • Thickness: .080 (2.0 mm)
• Standard Length: 10’ (3.05 m) and 20’ (6.09 m) • Standard Length: 10’ (3.05 m) and 20’ (6.09 m)
• Material: Aluminum • Material: Aluminum
• Weight: .37 Lbs./Ft. (0.55 kg/m) • Weight: .57 Lbs./Ft. (0.84 kg/m)
/16”
13
(20.6) 15/8”
15/8” (41.3)
(41.3) 15/8”
(41.3)
B217AL B217P
CLOSURE STRIP PLASTIC CLOSURE STRIP
• Standard Length: 10’ (304.8 cm) • Standard Length: 10’ (304.8 cm)
• Material: Aluminum • Material: PVC
• Weight: .15 Lbs./Ft. (0.23 kg/m) • Weight: .09 Lbs./Ft. (0.14 kg/m)
17/16” 17/16”
(36.5)

(36.5)

5/ 8”
(1 .9)
5
Materials
Alum. & Stainless Steel

Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for
Strut Systems 177
hannel & Closure Strips
B22AL
• Thickness: .105 (2.6 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: Aluminum
• Weight: .66 Lbs./Ft. (0.98 kg/m)
15/8”
(41.3)
15/8”
(41.3)

: .080 (2.0 mm)

Length: 10’ (3.05 m) and 20’ (6.09 m)
Aluminum
2 Lbs./Ft. (0.77 kg/m)

: .080 (2.0 mm)

Length: 10’ (3.05 m) and 20’ (6.09 m)
Aluminum
7 Lbs./Ft. (0.84 kg/m)
 B217FFAL
CLOSURE STRIP
• Standard Length: 10’ (304.8 cm)
• Material: Aluminum
• Weight: .16 Lbs./Ft. (0.24 kg/m)
21/2”
(63.5)

nel combinations available-see steel section for styles.

SH TYPE CHANNEL KO6 TYPE KNOCKOUT CHANNEL
• Material: Aluminum • Material: Aluminum
2” TYP. 6”
(50.8) (152.4)
9
/16” x 11/8” Slots (14.2) (28.6) 3”
H (76.2)
7
/8” (22.2) Dia. KO
H

H-17/8 TYPE CHANNEL B2000 SERIES

• Material: Aluminum RIGID CONDUIT CLAMPS
17/8” Typ. • Safety Factor of 5
(47.6) 9
/16” (14.2) Dia. Holes • Machine Screw and Square Nut included
H • Pipe clamp material 5052-H32
Design Load

Conduit or Material Design Load Wt./C Part No. Pipe

Size Thickness Lbs. kN Lbs. kg
B2001 AL 3
/8” (10) .063 (1.6) 180 (.80) 4 (1.
B2008 AL 1
/2” (15) .063 (1.6) 180 (.80) 4 (1.
B2009 AL 3
/4” (20) .080 (2.0) 270 (1.20) 6 (2.7
B2010 AL 1” (25) .080 (2.0) 270 (1.20) 7 (3.
B2011 AL 11/4” (32) .080 (2.0) 270 (1.20) 8 (3.
Wt./C Part No. Thickness H Lbs./Ft. kg/m B2012 AL 1 /2” (40)
1
.100 (2.5) 360 (1.60) 11 (5.
B2013 AL 2” (50) .100 (2.5) 360 (1.60) 12 (5.
B2014 AL 21/2” (65) .100 (2.5) 360 (1.60) 13 (5.9
B12H17/8 AL .105 (2.6) 27/16” (61.9) .86 (1.28)
B2015 AL 3” (80) .100 (2.5) 360 (1.60) 16 (7.
B22H17/8 AL .105 (2.6) 15/8” (41.3) .66 (.98)
B2016 AL 31/2” (90) .125 (3.2) 450 (2.00) 22 (10.0
B2017 AL 4” (100) .125 (3.2) 450 (2.00) 24 (10.
B54H17/8 AL .080 (2.0) /16” (20.6)
13
.37 (.55)
B2018 AL 4 /2” (115)
1
.125 (3.2) 450 (2.00) 26 (11.8
B2019 AL 5” (125) .125 (3.2) 450 (2.00) 27 (12.
B2020 AL 6” (150) .125 (3.2) 450 (2.00) 33 (14.
Alum. & Stainless Steel
Materials

Wt./C
Part No. Thickness H Lbs./Ft. kg/m

B12KO6 AL 0.105 (2.6) 27/16” (61.9) 0.86 (1.28)

B22KO6 AL 0.105 (2.6) 1 /8” 5 (41.3) 0.66 (0.98)
B24KO6 AL 0.080 (2.0) 15/8” (41.3) 0.52 (0.77)
B54KO6 AL 0.080 (2.0) /16”
13 (20.6) 0.37 (0.55)
Wt./C
Part No. Thickness H Lbs./Ft. kg/m

B12SH AL 0.105 (2.6) 27/16” (61.9) 0.83 (1.23)

B22SH AL 0.105 (2.6) 1 /8”
5 (41.3) 0.63 (0.93)
B24SH AL 0.080 (2.0) 1 /8” (41.3) 0.49
5 (0.73)
B54SH AL 0.080 (2.0) 13/16” (20.6) 0.34 (0.50)
B24H17/8 AL 0.080 (2.0) 15/8” (41.3) 0.52 (0.77)
Reference page 176 for general fitting specifications. Other channel combinations available-see steel s
178
 CHANNEL

0 SERIES
NDUIT CLAMPS
y Factor of 5
and Square Nut included
material 5052-H32
sign Load

Load Wt./C Part No. Pipe

Lbs. kg
3 (1.6) 180 (.80) 4 (1.8)
3 (1.6) 180 (.80) 4 (1.8)
0 (2.0) 270 (1.20) 6 (2.7)
0 (2.0) 270 (1.20) 7 (3.2)
0 (2.0) 270 (1.20) 8 (3.6)
0 (2.5) 360 (1.60) 11 (5.0)
0 (2.5) 360 (1.60) 12 (5.4)
(2.5) 360 (1.60) 13 (5.9)
0 (2.5) 360 (1.60) 16 (7.2)
(3.2) 450 (2.00) 22 (10.0)
5 (3.2) 450 (2.00) 24 (10.9)
(3.2) 450 (2.00) 26 (11.8)
5 (3.2) 450 (2.00) 27 (12.2)
5 (3.2) 450 (2.00) 33 (14.9)
mbinations available-see steel section for styles.
Strut Systems
 ALUMINUM FITTINGS
Most fittings, as shown in this catalog, can be supplied in aluminum. See “Fittings” section (page 72) of this cata
minimum production quantities and set-up charges.
Materials
Alum. & Stainless Steel

CHANNEL NUTS
We recommend the use of Stainless Steel channel nuts with Aluminum channel. For channel nut pull-out strength
channel nut information provided on pg. 50 & 51. A (.70) multiplier is to be applied to obtain the appropriate der
channel.

SPRING NUT NUT WITHOUT SPRING

NUTS FOR B12 CHANNEL

Part Number
With Without Thread Size Wt./C
Lbs. kg
Spring Spring Thickness
N724SS6 N224WOSS6 1
/4”-20 1
/4” (6.3) 6.6
N728SS6 N228WOSS6 3
/8”-16 3
/8” (9.5) 10.6
N725SS6 N225WOSS6 1
/2”-13 3
/8” (9.5) 9.7
NUTS FOR B22, B24 CHANNELS
Part Number
With Without Thread Size Wt./C
Lbs. kg
Spring Spring Thickness
N224SS6 N224WOSS6 1
/4”-20 1
/4” (6.3) 6.6
N228SS6 N228WOSS6 3
/8”-16 3
/8” (9.5) 10.6
N225SS6 N225WOSS6 1
/2”-13 3
/8” (9.5) 9.7
NUTS FOR B54 CHANNEL
Part Number
With Without Thread Size Wt./C
Lbs. kg
Spring Spring Thickness
N524SS6 N224WOSS6 /4”-20
1 1
/4” (6.3) 6.6
N528SS6 N228WOSS6 /8”-16
3 3
/8” (9.5) 10.6
N525SS6 N525WOSS6 1
/2”-13 3
/8” (9.5) 9.7
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for
Strut Systems 179
ction (page 72) of this catalog. Consult factory for possible

hannel nut pull-out strength and slip resistance, use the

obtain the appropriate derated values for aluminum

T SPRING

Wt./C
Lbs. kg

(3.0)
(4.8)
(4.4)

Wt./C
Lbs. kg

(3.0)
(4.8)
(4.4)

Wt./C
Lbs. kg

(3.0)
(4.8)
(4.4)
ailable-see steel section for styles.
B22SS* B24S
• *Substitute 4 for Stainless Steel 15/8” • *Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel Type 304 or 6 for Stainless Steel
Type 316 (41.3)
Type 3
• Thickness: 12 Ga. (2.6 mm) • Thickness: 14 Ga. (1.9 m
• Standard Length: 10’ (3.05 m) • Standard Length: 10’ (3.05
and 20’ (6.09 m) and 20’ (6.09
• Material: SS4, SS6 • Material: SS4, S
• Weight: 1.90 Lbs./Ft. (2.83 kg/m) • Weight: 1.40 Lbs./Ft. (2.08 kg/m)
15/8” (41
(41.3)

B32SS4 B42SS4
• Thickness: 12 Ga. (2.6 mm) • Thickness: 12 Ga. (2.6 mm)
• Standard Length: 10’ (3.05 m) 13/8” • Standard Length: 10’ (3.05 m)
and 20’ (6.09 m) (34.9) • and 20’ (6.09 m) 1”
• Material: SS4 • Material: SS4 (25.4)

• Weight: 1.70 Lbs./Ft. (2.53 kg/m) Weight: 1.44 Lbs./Ft. (2.14 kg/m)
15/8” 15/8”
(41.3) (41.3)

B52SS* B54SS*
• *Substitute 4 for Stainless Steel • *Substitute 4 for Stainless Steel
Type 304 or 6 for Stainless Steel 13/16” Type 304 or 6 for Stainless Steel 13/16”

• Type 316 12 Ga. (20.6) • Type 316 14 Ga. (20.6)

Thickness: (2.6 mm) Thickness: (1.9 mm)

• Standard Length: 10’ (3.05 m) • Standard Length: 10’ (3.05 m)
and 20’ (6.09 m) and 20’ (6.09 m)
• Material: SS4, SS6 • Material: SS4, SS6
• Weight: 1.27 Lbs./Ft. (1.89 kg/m) • Weight: .97 Lbs./Ft. (1.44 kg/m)
15/8” 15/8”
(41.3) (41.3)

SH TYPE CHANNEL H-17/8 TYPE CHANNEL

2” TYP. 17/8” TYP. (47.6)
(50.8) /16” (14.2) Dia. Holes
9

9
/16” x 7/8” Slots H
H (14.2) (22.2)

Wt./C
Part No. Thickness H Lbs./Ft. kg/m

B22SH SS4 12 Ga. (2.6) 15/8” (41.3) 1.82 (2.70) Part No. Thickness H
B22SH SS6 12 Ga. (2.6) 15/8” (41.3) 1.82 (2.70)
B24SH SS4 14 Ga. (1.9) 15/8” (41.3) 1.34 (1.99) B22H17/8 SS4 12 Ga. (2.6) 15/8” (41.3)
B24SH SS6 14 Ga. (1.9) 15/8” (41.3) 1.34 (1.99) B24H17/8 SS4 14 Ga. (1.9) 15/8” (41.3)
B32SH SS4 12 Ga. (2.6) 13/8” (34.9) 1.62 (2.41) B24H17/8 SS6 14 Ga. (1.9) 15/8” (41.3)
B42SH SS4 12 Ga. (2.6) 1” (25.4) 1.36 (2.02) B32H17/8 SS4 12 Ga. (2.6) 13/8” (34.9)
B52SH SS4 12 Ga. (2.6) 13
/16” (20.6) 1.23 (1.83) B42H17/8 SS4 12 Ga. (2.6) 1” (25.4)
B52SH SS6 12 Ga. (2.6) 13
/16” (20.6) 1.23 (1.83) B54H17/8 SS4 14 Ga. (1.9) 13
/16” (20.6)
B54SH SS4 14 Ga. (1.9) 13
/16” (20.6) 0.91 (1.35) B54H17/8 SS6 14 Ga. (1.9) 13
/16” (20.6)
B54SH SS6 14 Ga. (1.9) 13
/16” (20.6) 0.91 (1.35)
Alum. & Stainless Steel
Materials

Reference page 176 for general fitting specifications. Other channel combinations available-see steel s
180
 B24SS*
ss Steel 15/8”
ess Steel (41.3)

Type 316
• Thickness: 14 Ga. (1.9 mm)
• Standard Length: 10’ (3.05 m)
and 20’ (6.09 m)
• Material: SS4, SS6
bs./Ft. (2.08 kg/m) 15/8”
(41.3)

)
1”
(25.4)

m)

eel
eel 13/16”

(20.6)

m)

Wt./C
Lbs./Ft. kg/m

1.85 (2.75)
1.36 (2.02)

1.36 (2.02)
1.65 (2.45)
 1.39 (2.07)
0.93 (1.38)
0.93 (1.38)

mbinations available-see steel section for styles.

Strut Systems
 STAINLESS STEEL FITTINGS
Most fittings, as shown in this catalog, can be supplied in Type 304 or Type 316 stainless steel. See “Fittings” se
Consult factory for possible minimum production quantities and set-up charges.
Materials
Alum. & Stainless Steel

B2000 SERIES
PIPE AND TUBING CLAMPS
• Safety Factor of 5
• Combination Recess Hex Head Machine Screw and Square Nut included
• Material: Stainless Steel Type 304 & 316

Design Load
Conduit Material Design Load Wt./C
Part No. Pipe Size Thickness Lbs. kN Lbs. kg

B2001 SS4 3
/8” (10) 16 Ga. (1.5) 400 (1.78) 10 (4.5)
B2008 SS4 1
/2” (15) 16 Ga. (1.5) 400 (1.78) 11 (5.0)
B2009 SS4 3
/4” (20) 14 Ga. (1.9) 600 (2.67) 15 (6.8)
B2010 SS4 1” (25) 14 Ga. (1.9) 600 (2.67) 16 (7.2)
B2011 SS4 1 /4”
1 (32) 14 Ga. (1.9) 600 (2.67) 20 (9.1)
B2012 SS4 11/2” (40) 12 Ga. (2.6) 800 (3.56) 30 (13.6)
B2013 SS4 2” (50) 12 Ga. (2.6) 800 (3.56) 34 (15.4)
B2014 SS4 21/2” (65) 12 Ga. (2.6) 800 (3.56) 38 (17.2)
B2015 SS4 3” (80) 12 Ga. (2.6) 800 (3.56) 44 (19.9)
B2016 SS4 3 /2”
1 (90) 12 Ga. (2.6) 1000 (4.45) 51 (23.1)
B2017 SS4 4” (100) 12 Ga. (2.6) 1000 (4.45) 55 (24.9)
B2018 SS4 41/2” (115) 12 Ga. (2.6) 1000 (4.45) 59 (26.7)
B2019 SS4 5” (125) 12 Ga. (2.6) 1000 (4.45) 64 (29.0)
B2020 SS4 6” (150) 12 Ga. (2.6) 1000 (4.45) 80 (36.3)

CHANNEL NUTS
• For Channel Nuts pull-out strength and slip resistance, use the data
shown in “Channel Nuts & Hardware” section of this catalog.
Note: Reduce slip load by 50% due to hardness of material.
NUTS FOR B22, B24, B32 CHANNELS

SPRING NUT
NUT WITHOUT SPRING
Part Number
With Without Thread Size Wt./C
Lbs. kg
Spring Spring Thickness
N224SS6 N224WOSS6 /4”-20
1
/4”
1 (6.3) 6.6
N228SS6 N228WOSS6 /8”-16
3
/8”
3 (9.5) 10.6
N225SS6 N225WOSS6 /2”-13
1
/8”
3 (9.5) 9.7
 NUTS FOR B42, B52, B54 CHANNELS
Part Number
With Without Thread Size Wt./C
Lbs. kg
Spring Spring Thickness
N524SS6 N224WOSS6 1
/4”-20 1
/4” (6.3) 6.6
N528SS6 N228WOSS6 3
/8”-16 3
/8” (9.5) 10.6
N525SS6 N225WOSS6 1
/2”-13 3
/8” (9.5) 9.7
Reference page 176 for general fitting specifications. Other channel combinations available-see steel section for
Strut Systems 181
nless steel. See “Fittings” section (page 72) of this catalog.

esign Load

T WITHOUT SPRING

Wt./C
Lbs. kg

(3.0)
(4.8)
(4.4)
 Wt./C
Lbs. kg

(3.0)
(4.8)
(4.4)
ailable-see steel section for styles.
 Fiberglass
We offer two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are idea
While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of environments.
Please refer to the "Corrosion Resistance Guide" for specific applications, page 183.
Materials & Finishes
Our Fiberglass Strut systems are manufactured from glass fiber-reinforced plastic shapes that meet AS
Rating and self- extinguishing requirements of ASTM D-635. A surface veil is applied during pultrusion t
and ultraviolet resistance.
Fittings
The following dimensions apply to all fittings except as noted on the drawings:
Hole Size–13/32” (10.3 mm) Dia.
Hole Spacing–13/16” (20.6 mm) from end and 17/8” (47.6 mm) on center.
Width–15/8” (41.3 mm)
Thickness–1/4” (6.3 mm)
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
Fiberglass Materials

182

Fibe
CHANNEL RESIN INFORMATION
 l ester. Both resins are ideal for corrosive environments.
der range of environments.
age 183.

plastic shapes that meet ASTM E-84, Class 1 Flame

s applied during pultrusion to insure a resin-rich surface

gs:

nsions are in millimeters.

Strut Systems

Fiberglass
 We offer two fire retardant (FR) resins for strut systems, polyester and vinyl ester. Both resins are ide
environments. While polyester is sufficient for most uses, vinyl ester is suitable for a broader range of
Please refer to the "Corrosion Resistance Guide" below for specific applications.

Corrosion Resistance Guide

Chemicals 70°F (21°C) 160°F (71°C) Chemicals 70°F (21°C)

Acetic acid 5% BFP/BFV BFP/BFV Methyl alcohol 10%
Acetic acid 52% BFP/BFV BFV-210° ** Naphtha
Aluminum potassium sulfate 5% BFP/BFV BFP/BFV Nitric acid 5%
Ammonium hydroxide 10% BFP/BFV BFV-150° ** Nitric acid 20%
Ammonium nitrate BFP/BFV BFP/BFV Phosphoric acid 10%
Benzene sulfonic acid 5% BFP/BFV BFP/BFV Phosphoric acid 30%
Calcium chloride BFP/BFV BFP/BFV Phosphoric acid 85%
Carbon tetrachloride BFV BFV-100° ** Sodium bicarbonate 10%
Chlorine dioxide 15% BFP/BFV BFV-150° ** Sodium bisulfate
Chromic acid 5% BFV BFV-150° ** Sodium carbonate
Copper sulfate BFP/BFV BFP/BFV Sodium chloride
Diesel fuel BFP/BFV BFV Sodium hydroxide 1-50%
Ethylene glycol BFP/BFV BFP/BFV Sodium hypochlorite 5%
Fatty acids 100% BFP/BFV BFP/BFV Sodium nitrate
Ferrous sulfate BFP/BFV BFP/BFV Sodium silicate
Fluosilicic acid 0-20% BFV BFV Sodium sulfate
Gasoline BFP/BFV BFV Sulfuric acid 0-30%
Hydrochloric acid 1% BFP/BFV BFP/BFV Sulfuric acid 30-50%
Hydrochloric acid 15% BFP/BFV BFV-180° ** Sulfuric acid 50-70%
Hydrochloric acid 37% BFP/BFV BFV-150° ** Trisodium phosphate 25%
Kerosene BFP/BFV BFP/BFV Trisodium phosphate-All
Magnesium chloride BFP/BFV BFP/BFV Water, Distilled
BFP - BFP parts recommended BFV - BFV parts recommended ** - Not recommended to exceed this temperature
Information contained in this chart is based on data from raw material suppliers.
Temperatures are not the minimum nor the maximum (except where specifically stated) but represent standard test
conditions. The products may be suitable at higher temperatures but individual test data should be required to establish
suitability.
The recommendations or suggestions contained in this chart are made without guarantee or representation as to results. We
suggest that you evaluate the recommendations and suggestions in your own laboratory or actual field trial prior to use.
Fiberglass Materials

Flame Retardant Properties BFP BFV

Flame Resistance (FTMS 406-2023)
ign/burn, seconds 75/75 75/75

Intermittent Flame Test (HLT-15), rating 100 100

Flammability Test (ASTM D635) Ignition
Burning Time none 0 none 0
sec. sec.

Surface Burning Characteristics (ASTM

E84), Flame spread index 25 25

UL 94 Flame Class V-0 V-0

Recommended Guideline:
Temperature Design Load Multiplier
75°F (24°C) 100%
100°F (38°C) 90%
125°F (52°C) 78%
150°F (66°C) 68%
175°F (79°C) 60%
200°F (93°C) 52%
Reference page 182 for general fitting specifications.
Strut Systems 183
and vinyl ester. Both resins are ideal for corrosive
er is suitable for a broader range of environments.
applications.

160°F (71°C)
BFP/BFV BFV-150° **
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFV BFV-120° **
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFP/BFV BFV
BFP/BFV BFP/BFV
BFV BFV-120° **
BFP/BFV BFV-120° **
BFP/BFV BFP/BFV
BFP/BFV BFV-210° **
BFP/BFV BFP/BFV
BFP/BFV BFP/BFV
BFV BFV
BFV BFV-180° **
BFP/BFV BFV-210° **
BFV BFV-210° **
BFP/BFV BFP/BFV
ended to exceed this temperature

ed) but represent standard test

ata should be required to establish

ntee or representation as to results. We

ory or actual field trial prior to use.
e 182 for general fitting specifications.
183
 Fiberglass
BFP22 THRU BFV22SH
• Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of ASTM D-4385 Levels III and IV.

BFP22 BFV22 BFP22H17/8 BFV22H17/8 BFP22SH

Solid Back 9
/16” (14.3) holes BFV22SH
17/8” (47.6) on centers 9
/16” (14.3) x 7/8” (22.2)
2” (50.8) on centers
13
/16”
(20.6)
Fiberglass Materials

Part No. Material Description Color Weight

Lbs./ft. kg/m

BFP22* Polyester Resin Solid Back Gray 0.63 (0.94)

BFV22* Vinyl Ester Resin Solid Back Beige 0.63 (0.94)
BFP22H17/8* Polyester Resin Holes in Back Gray 0.60 (0.89)
BFV22H17/8* Vinyl Ester Resin Holes in Back Beige 0.60 (0.89)
BFP22SH* Polyester Resin Slots in Back Gray 0.61 (0.91)
BFV22SH* Vinyl Ester Resin Slots in Back Beige 0.61 (0.91)
15/8”
(41.3)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length

BFP22A BFV22A 13
/1
• Channel Lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m) 6”
• Fiberglass strut meets specification of ASTM D-4385 Levels III and IV. (20
.6)

15/8”
BFP22A (41.3)
BFV22A
Solid Back to Back

Part No. Material Description Color Weight

Lbs./ft. kg/m

BFP22A* Polyester Resin Back To Back Gray 1.15 (1.71)

BFV22A* Vinyl Ester Resin Back To Back Beige 1.15 (1.71)

* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length
 WARNING: Appropriate protective clothing and respiratory Published design loads on page 185 are base
protection device should be worn when field cutting or grinding be reduced for continuous exposure to highe
below for high temperature applications.
fiberglass.
Field Cutting Sealant Kits
RSK010 Pint Sealing Kit (473 cm )
3

includes sealant and brush applicator

• Seals exposed fibers after field cutting. •
• UV resistant •

Temperature Design Load Multiplier

75°F (24°C) 100%
100°F (38°C) 90%
125°F (52°C) 78%
150°F (66°C) 68%
175°F (79°C) 60%
200°F (93°C) 52%
Reference page 182 for general fitting specifications.
184

BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN

BFP22SH
BFV22SH
9
/16” (14.3) x 7/8” (22.2) slots
2” (50.8) on centers
13
/16”
(20.6)

15/8”
(41.3)
15/8”
(41.3)

15/8”
(41.3)

3
1

/
4

15/8”
(41.3)
sign loads on page 185 are based on usage at 70°F (21°C) and must
r continuous exposure to higher temperatures. Refer to the chart
h temperature applications.

Strut Systems

Fiberglass
 Beam Span Maximum Allowable Deflection @
Beam Load Load Maximum Allowable Allowable Load @ Deflection =
Part No. Beam Load
1/240 Span 1/360 Span
in. mm Lbs. kN in. mm Lbs. kN Lbs.
12” BFP22 1781 (7.92) 0.064 (1.62) 1392 (6.19) 928
(305)
BFP22A 2259 (10.05) 0.037 (0.94) 2259 (10.05) 2051
24” BFP22 890 (3.96) 0.256 (6.50) 347 (1.54) 231
(609)
BFP22A 1127 (5.01) 0.147 (3.73) 767 (3.41) 511
36” BFP22 592 (2.63) 0.576 (14.63) 153 (0.68) 101
(914)
BFP22A 750 (3.33) 0.330 (8.38) 338 (1.50) 224
48” BFP22 443 (1.97) 1.024 (26.01) 85 (0.38) 55
(1219)
BFP22A 560 (2.49) 0.587 (14.91) 188 (0.83) 123
60” BFP22 353 (1.57) 1.600 (40.64) 53 (0.23) 34
(1524)
BFP22A 446 (1.98) 0.918 (23.32) 117 (0.52) 76
72” BFP22 293 (1.30) 2.303 (58.49) 35 (0.15) 22
(1829)
BFP22A 370 (1.64) 1.322 (33.58) 78 (0.34) 50
96” (2438) BFP22 218 (0.97) 4.095 (104.01) 17 (0.07) 9
BFP22A 273 (1.21) 2.350 (59.69) 39 (0.17) 23
120” (3048) BFP22 172 (0.76) 6.398 (162.51) 8 (0.03) 3
BFP22A 214 (0.95) 3.671 (93.24) 19 (0.08) 9
Fiberglass Materials

BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN

Beam Span Maximum Allowable Deflection @
Beam Load Load Maximum Allowable Allowable Load @ Deflection =
Part No. Beam Load
1/240 Span 1/360 Span
in. mm Lbs. kN in. mm Lbs. kN Lbs.

12” BFV22 2220 (9.87) 0.071 (1.80) 1568 (6.97) 1045

(305)
BFV22A 6442 (28.65) 0.039 (0.99) 6442 (29.65) 5549
24” BFV22 1109 (4.93) 0.283 (7.19) 391 (1.74) 260
(609)
BFV22A 3219 (14.32) 0.155 (3.94) 2079 (9.25) 1385
36” BFV22 738 (3.28) 0.637 (16.18) 172 (0.76) 114
(914)
BFV22A 2144 (9.53) 0.348 (8.84) 922 (4.10) 613
48” BFV22 553 (2.46) 1.133 (28.78) 96 (0.43) 63
(1219)
BFV22A 1606 (7.14) 0.619 (15.72) 516 (2.29) 342
60” BFV22 441 (1.96) 1.770 (44.96) 60 (0.26) 39
(1524)
BFV22A 1283 (5.70) 0.967 (24.56) 327 (1.45) 216
72” (1829) BFV22 366 (1.63) 2.549 (64.74) 40 (0.18) 25
BFV22A 1067 (4.74) 1.393 (35.38) 224 (0.99) 147
96” BFV22 273 (1.21) 4.531 (115.09) 19 (0.08) 11
(2438)
BFV22A 796 (3.54) 2.477 (62.91) 121 (0.54) 78
120” BFV22 216 (0.96) 7.079 (179.80) 9 (0.04) 7
(3048)
120”
(3048)
BFV22A 633 (2.81) 3.870 (98.30) 72 (0.32) 44
Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the loa
multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between support
with holes or slots use 90% of recommended load shown in channel loading chart.

Reference page 182 for general fitting specifications.

Strut Systems 185
@ Deflection =

1/360 Span
kN
(4.13)
(9.12)
(1.03)
(2.27)
(0.45)
(0.99)
(0.24)
(0.55)
(0.15)
(0.34)
(0.10)
(0.22)
(0.04)
(0.10)
(0.01)
(0.04)

@ Deflection =

1/360 Span
kN
(4.65)
(24.68)
(1.15)
(6.16)
(0.51)
(2.72)
(0.28)
(1.52)
(0.17)
(0.96)
(0.11)
(0.65)
(0.05)
(0.34)
(0.02)
 (0.19)

um safety factor of 2. If the load is concentrated at center span,

hould be tied between supports to prevent twist. For channels

neral fitting specifications.

85
 Fiberglass
BFP42 THRU BFV42SH
• Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of ASTM D-4385 Levels III and IV.

BFP42 BFV42 BFP42H17/8 BFV42H17/8 BFP42SH

Solid Back 9
/16” (14.3) holes BFV42SH
17/8” (47.6) on centers 9
/16” (14.3) x 7/8” (22.2) slo
2” (50.8) on centers
13
/16”
Fiberglass Materials

Part No. Material Description Color Weight

Lbs./ft. kg/m

BFP42* Polyester Resin Solid Back Gray 0.48 (0.71)

BFV42* Vinyl Ester Resin Solid Back Beige 0.48 (0.71)
BFP42H17/8* Polyester Resin Holes in Back Gray 0.46 (0.68)
BFV42H17/8* Vinyl Ester Resin Holes in Back Beige 0.46 (0.68)
BFP42SH* Polyester Resin Slots in Back Gray 0.47 (0.70)
BFV42SH* Vinyl Ester Resin Slots in Back Beige 0.47 (0.70)
(20.6)

1”
(25.
4

15/8”
(41.3)
 * Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length
BFP42A BFV42A
• Channel lengths: 10 Ft. (3.05 m) and 20 Ft. (6.09 m)
• Fiberglass strut meets specification of ASTM D-4385 Levels III and IV.
BFP42A BFV42A
Solid Back to Back
* Insert -10 for 10’-0” (3.05 m) length or -20 for 20’-0” (6.09 m) length

1”
(25.4)

(20.6)

2”
(50.8

15/8”

Part No. Material Description Color Weight

Lbs./ft. kg/m

BFP42A* Polyester Resin Back To Back Gray 0.85 (1.26)

BFV42A* Vinyl Ester Resin Back To Back Beige 0.85 (1.26)
WARNING: Appropriate protective clothing and respiratory Published design loads on page 187 are based
protection device should be worn when field cutting or grinding be reduced for continuous exposure to higher
below for high temperature applications.
fiberglass.
Field Cutting Sealant Kits
RSK010 Pint Sealing Kit (473 cm ) 3

includes sealant and brush applicator

• Seals exposed fibers after field cutting. •
• UV resistant •

Temperature Design Load Multiplier

75°F (24°C) 100%
100°F (38°C) 90%
125°F (52°C) 78%
150°F (66°C) 68%
175°F (79°C) 60%
200°F (93°C) 52%
Reference page 182 for general fitting specifications.
186
 Fibe
BEAM LOADING DATA FOR GLASS REINFORCED POLYESTER RESIN
BFP42SH
BFV42SH
9
/16” (14.3) x 7/8” (22.2) slots
2” (50.8) on centers
13
/16”

)
 13
/16
”
)
(41.
3)

1”
(25.4)

n loads on page 187 are based on usage at 70°F (21°C) and must
ontinuous exposure to higher temperatures. Refer to the chart
mperature applications.

Strut Systems
Fiberglass
 Beam Span Maximum Allowable Deflection @
Beam Load Load Maximum Allowable Allowable Load @ Deflection =
Part No. Beam Load
1/240 Span 1/360 Span
in. mm Lbs. kN in. mm Lbs. kN Lbs.
12” BFP42 841 (3.74) 0.104 (2.64) 403 (1.79) 269
(305)
BFP42A 2325 (10.34) 0.060 (1.52) 1948 (8.66) 1299
24” BFP42 420 (1.87) 0.417 (10.59) 100 (0.44) 66
(609)
BFP42A 1161 (5.16) 0.239 (6.07) 486 (2.16) 323
36” (914) BFP42 279 (1.24) 0.938 (23.82) 43 (0.19) 29
BFP42A 773 (3.44) 0.537 (13.64) 214 (0.95) 142
48” BFP42 208 (0.92) 1.667 (42.34) 23 (0.10) 15
(1219)
BFP42A 578 (2.57) 0.955 (24.26) 119 (0.53) 78
60” BFP42 166 (0.74) 2.604 (66.14) 14 (0.06) 8
(1524)
BFP42A 461 (2.05) 1.491 (37.87) 74 (0.33) 48
72” BFP42 137 (0.61) 3.750 (95.25) 8 (0.03) 5
(1829)
BFP42A 383 (1.70) 2.148 (54.56) 49 (0.22) 31
96” BFP42 101 (0.45) 6.667 (169.34) 3 (0.01) –
(2438)
BFP42A 284 (1.26) 3.818 (96.98) 24 (0.10) 14
120” BFP42 79 (0.35) 10.417 (264.59) – – –
(3048)
BFP42A 224 (0.99) 5.966 (151.53) 11 (0.05) 5
Fiberglass Materials

BEAM LOADING DATA FOR GLASS REINFORCED VINYL ESTER RESIN

Beam Span Maximum Allowable Deflection @
Beam Load Load Maximum Allowable Allowable Load @ Deflection =
Part No. Beam Load
1/240 Span 1/360 Span
in. mm Lbs. kN in. mm Lbs. kN Lbs.
12” BFV42 988 (4.39) 0.112 (2.84) 440 (1.96) 293
(305)
BFV42A 2865 (12.74) 0.063 (1.60) 2278 (10.13) 1518
24” BFV42 493 (2.19) 0.448 (11.38) 109 (0.48) 73
(609)
BFV42A 1431 (6.36) 0.252 (6.40) 568 (2.52) 378
36” BFV42 328 (1.46) 1.009 (25.63) 48 (0.21) 31
(914)
BFV42A 953 (4.24) 0.566 (14.37) 251 (1.11) 166
48” BFV42 245 (1.09) 1.793 (45.54) 26 (0.11) 16
(1219)
BFV42A 713 (3.17) 1.006 (25.55) 139 (0.62) 92
60” BFV42 195 (0.87) 2.802 (71.17) 15 (0.06) 9
(1524)
BFV42A 569 (2.53) 1.572 (39.93) 87 (0.38) 57
72” BFV42 162 (0.72) 4.035 (102.49) 9 (0.04) 5
(1829)
BFV42A 473 (2.10) 2.264 (57.50) 58 (0.26) 37
96” BFV42 120 (0.53) 7.173 (182.19) 3 (0.01) 1
(2438)
BFV42A 351 (1.56) 4.025 (102.23) 29 (0.13) 17
120” BFV42 94 (0.42) 11.207 (284.66) – – –
(3048)
120”
(3048)
BFV42A 278 (1.23) 6.288 (159.71) 14 (0.06) 7
Loading Information
Beam Loads:
The above charts list the total allowable uniform load for various simple spans based on a minimum safety factor of 2. If the loa
multiply the load from the above charts by 0.5 and the corresponding deflection by 0.8.
All beams should be supported in a manner to prevent rotation at supports. Long, deep beams should be tied between support
with holes or slots use 90% of recommended load shown in channel loading chart.

Reference page 182 for general fitting specifications.

Strut Systems 187
@ Deflection =

1/360 Span
kN
(1.19)
(5.78)
(0.29)
(1.43)
(0.13)
(0.63)
(0.06)
(0.34)
(0.03)
(0.21)
(0.02)
(0.14)
–
(0.04)
–
(0.02)

@ Deflection =

1/360 Span
kN
(1.30)
(6.75)
(0.32)
(1.68)
(0.14)
(0.74)
(0.07)
(0.41)
(0.04)
(0.25)
(0.02)
(0.16)
(0.004)
(0.07)
–
 (0.03)

um safety factor of 2. If the load is concentrated at center span,

hould be tied between supports to prevent twist. For channels

neral fitting specifications.

87
Fiberglass
BF*22I
CONCRETE INSERTS
• Design Load 300 Lbs (1.47 kN)
• Safety Factor of 3
• Standard lengths: 6” (152),12” (305), 24” (609),
36” (914), 48” (1219), 60” (1524), 72” (1829),
84” (2133), 96” (2438), 108” (2743) and 120” (3048)
• Available Material:
*Insert P for BFP - Polyester Resin channel and tee
*Insert V for BFV - Vinyl Ester Resin channel with Polyester Resin tee
• Shipped with removable styrofoam insert
Fiberglass Materials

Length
31/8”
(79.4)
8” (41.3) x 15/8” (41.3)
Field Cutting Sealant Kits Channel Size
RSK010 . . . Pint Sealing Kit (473 cm ) 3

includes sealant and brush applicator 15/

• Seals exposed fibers after field cutting •
• UV resistant •

BFV501 SERIES
U-BOLTS WITH HEX NUTS
• Design Load Safety Factor of 3
• Load A: Straight down loading
• Load B: Side loading
• Inner surface of U-Bolt is flat to provide additional contact surface area
• Material: Glass Reinforced Polyurethane Load
A
Load B
Part No. Nominal Pipe Thread Design Load A Design Load B Maximum Torque
Size Size Lbs. kN Lbs. kN in.-Lbs. N•m
in. mm

BFV501-1/2 /2
1 (15) 3
/8”-16 300 (1.33) 150 (0.67) 30 (3.4)
BFV501-3/4 /4
3 (20) 3
/8”-16 300 (1.33) 150 (0.67) 30 (3.4)

BFV501-1 1 (25) 3
/8”-16 300 (1.33) 150 (0.67) 30 (3.4)
BFV501-1 /4 1
11/4 (32) 3
/8”-16 300 (1.33) 150 (0.67) 30 (3.4)

BFV501-1 /2 1
1 /2 1 (40) 3
/8”-16 300 (1.33) 150 (0.67) 30 (3.4)

BFV501-2 2 (50) 1
/2”-13 600 (2.67) 200 (0.89) 60 (6.8)
BFV501-2 /2 1
2 /2 1 (65) 1
/2”-13 600 (2.67) 200 (0.89) 60 (6.8)
BFV501-3 3 (80) 1
/2”-13 600 (2.67) 200 (0.89) 60 (6.8)

BFV501-31/2 31/2 (90) 1

/2”-13 600 (2.67) 200 (0.89) 60 (6.8)
BFV501-4 4 (100) 1
/2”-13 600 (2.67) 200 (0.89) 60 (6.8)

Reference page 182 for general fitting specifications.

188
 15/8” (41.3)
ze

Load B
Wt./C
Lbs. kg

3.5 (1.59)
3.9 (1.77)

4.4 (1.99)
4.8 (2.18)

5.2 (2.36)

7.7 (3.49)
10.2 (4.63)
12.6 (5.71)

15.1 (6.85)
17.6 (7.98)

Strut Systems
 CHANNEL NUTS
• Design Load Safety Factor of 3
• Overall Nut Height 5/8” (15.9)
• Maximum torque and slip resistance loads shown are when using
stainless steel bolts. When using fiberglass hardware use Max. Torque
for fiberglass bolts, and multiply slip resistance loads by .14 for 3/8”
and .60 for 1/2” thread size.
• Material: Glass Reinforced Polyurethane
• Spring Material: Zinc Plated Steel

WITH SPRING
Part No. Part No. Thread Pull-Out Slip Resistance Max. Torque
With Spring W/O Spring Size Lbs kN Lbs. N in.-Lbs. N•m

BFV-224 BFV-224WO 1
/4”-20 300 (1.33) 150 (0.67) 200 (22.6)
BFV-223 BFV-223WO /16”-18
5
300 (1.33) 150 (0.67) 200 (22.6)
BFV-228 BFV-228WO 3
/8”-16 300 (1.33) 150 (0.67) 200 (22.6)
BFV-225 BFV-225WO 1
/2”-13 300 (1.33) 150 (0.67) 200 (22.6)
Fiberglass Materials

BFVHHCS
HEX HEAD CAP SCREWS
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane

Design Load (in

Thread tension) Lbs. Max. Torque Wt./C
Part No.
Size kN in.-Lbs. N•m Lbs. kg

BFVHHCS 5/16 x 1 /16”-18

5
190 (0.84) 30 (3.4) 0.4 (0.18)
BFVHHCS /16 x 1 /4 5 1
/16”-18
5
190 (0.84) 30 (3.4) 0.5 (0.23)
BFVHHCS 5/16 x 11/2 5
/16”-18 190 (0.84) 30 (3.4) 0.6 (0.27)
BFVHHCS 5/16 x 2 5
/16”-18 190 (0.84) 30 (3.4) 0.8 (0.36)
BFVHHCS 3/8 x 1 3
/8”-16 300 (1.33) 45 (5.1) 0.9 (0.41)
BFVHHCS 3/8 x 11/4 3
/8”-16 300 (1.33) 45 (5.1) 1.1 (0.50)
BFVHHCS 3/8 x 11/2 3
/8”-16 300 (1.33) 45 (5.1) 1.3 (0.59)
BFVHHCS 3/8 x 2 /8”-16
3
300 (1.33) 45 (5.1) 1.3 (0.59)
BFVHHCS /8 x 2 /2 3 1 3
/8”-16 300 (1.33) 45 (5.1) 1.5 (0.68)
BFVHHCS 1/2 x 1 1
/2”-13 490 (2.18) 110 (12.4) 1.4 (0.63)
BFVHHCS 1/2 x 11/4 1
/2”-13 490 (2.18) 110 (12.4) 1.8 (0.81)
BFVHHCS 1/2 x 11/2 1
/2”-13 490 (2.18) 110 (12.4) 2.2 (1.00)
BFVHHCS /2 x 2 1 1
/2”-13 490 (2.18) 110 (12.4) 3.0 (1.36)
BFVHHCS 1/2 x 21/2 1
/2”-13 490 (2.18) 110 (12.4) 3.7 (1.68)
BFVHHCS 1/2 x 3 1
/2”-13 490 (2.18) 110 (12.4) 4.5 (2.04)
 BFVHN
HEX NUTS
• 3/4” & 1” sizes are available. Contact inside sales for details
• Material: Glass Reinforced Polyurethane

Part No. Thread Size Nut Thickness Wt./C

in. mm Lbs. kg

BFVHN 5/16 5
/16”-18 /64
17 (6.7) 0.2 (0.09)
BFVHN /8
3 3
/8”-16 /64
21 (8.3) 0.3 (0.13)
BFVHN 1/2 1
/2”-13 /16
7 (11.1) 0.7 (0.32)

BFVHN 5/8 5
/8”-11 /64
35 (13.9) 1.4 (0.63)

Reference page 182 for general fitting specifications.

Strut Systems 189
 Fiberglass
W/O (WITHOUT) SPRING

WITH SPRING
Wt./C
Lbs. kg

2.4 (1.09)
2.5 (1.13)
2.3 (1.04)
2.1 (0.95)
general fitting specifications.
189
 Fiberglass
BFVATR
ALL THREADED ROD
• Design Load Safety Factor of 3
• Use ATR nuts in place of hex nuts with 3/8”-16 and 1/2”-13 threaded rod in order to obtain minimum required thre
17
/32” (13.5) to obtain design load shown below.
• Material: Glass Reinforced Vinyl Ester

Design Load Max. Torque Wt./Ft.

Thread (in tension) in.-Lbs. N•m Lbs. kg
Part No.
Size Lbs. kN

BFVATR 3/8 x 48” 3

/8”-16 425 (1.89) 45 (5.1) 0.08 (0.04)
BFVATR 1/2 x 48” 1
/2”-13 750 (3.33) 110 (12.4) 0.13 (0.06)
BFVATR 5/8 x 48” 5
/8”-11 950 (4.22) 230 (26.0) 0.21 (0.09)
Fiberglass Materials

BFVATRHN
THREADED ROD NUTS
• ATR Nut is required with 3/8”-16 and 1/2”-13 ATR to provide additional thread engagement which is critical to AT
• Material: Glass Reinforced Polyurethane

H
Part No. Thread H Wt./C
Size in. mm Lbs. kg

BFVATRHN 3/8 3
/8”-16 /4
3 (19) 0.8 (0.36)
BFVATRHN 1/2 1
/2”-13 /8
7 (22) 1.7 (0.77)

BFVFW BFV655 SERIES

FLAT WASHERS ROD COUPLINGS
• Material: PVC • Material: Glass Reinforced Polyurethane

Part Hole
No. Size Wt./C
in. Lbs. kg

BFVFW 3/8 /8
3
.5 (.22) Part Thread Wt./C
No. Size Lbs. kg
BFVFW 1/2 1
/2 .5 (.22)
BFVFW 5/8 5
/8 .5 (.22) BFV655-3/8 3
/8”-16 7.4 (3.35)
BFVFW 3/4 3
/4 .5 (.22) BFV655-1/2 1
/2”-13 11.3 (5.12)
BFVFW 1 1 .5 (.22) BFV655-5/8 /8”-11
5
16.7 (7.57)
 BFVSL SERIES
STOP-LOCK KITS
• Material: Glass Reinforced Polyurethane

Part Thread Wt./C

No. Size Lbs. kg

BFVSL-3/8 /8”-16
3
7.4 (3.35)
BFVSL-1/2 /2”-13
1
11.3 (5.12)
Reference page 182 for general fitting specifications.
190
eaded rod in order to obtain minimum required thread engagement of

additional thread engagement which is critical to ATR load carrying capacity.

5 SERIES
UPLINGS
al: Glass Reinforced Polyurethane

t Thread Wt./C
Size Lbs. kg

/8 3
/8”-16 7.4 (3.35)
/2 1
/2”-13 11.3 (5.12)
/8 5
/8”-11 16.7 (7.57)
ecifications.
Strut Systems
 BFV100 thru BFV300 Design Load
ADJUSTABLE PIPE CLAMPS
• Completely Non-Metallic
• Adjustable to U.S. & Metric Pipe Diameters
• Fits OD Sizes 3/4” (19.0) to 31/2” (88.9)
• Easy To Install
• No Special Tools Required
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
• Not recommended for vertical installation without additional Stop-
Lock Kit. Kit includes one square washer, channel nut and hex head
cap screw.
Order (Stop-Lock Kit on page 190) BFVSL-3/8 for 3/8”-16 hardware or
BFVSL-1/2 for 1/2”-13 hardware.
Mount kit below clamp when used in vertical strut to prevent clamp
slipping.
Fiberglass Materials

Nominal Pipe Sizes Pipe O.D. Design Load

Part No. in. mm Range Lbs. kN
in. mm

BFV100 1
/2 - 11/2 (15- 40) .75 - 1.90 (21.3 - 48.3) 135 (0.60)
BFV200 1 /2 - 2
1 (40 - 51) 1.90 - 2.37 (48.3 - 60.3) 135 (0.60)
BFV300 21/2 - 3 (63 - 76) 2.87 - 3.50 (73.0 - 88.9) 145 (0.64)
 BFV2000 SERIES Design Load
Stop-Lock Kit for vertical
NON-METALLIC PIPE CLAMPS
• For rigid and PVC conduit.
• Standard hardware includes slotted round head machine screw and square
nut in 316 stainless steel
• Design Load Safety Factor of 3
• Material: Glass Reinforced PPO
• Not recommended for vertical installation without additional Stop-Lock Kit.
Kit includes one square washer, channel nut and hex head cap screw.
Order (Stop-Lock Kit on page 190) BFVSL-3/8 for 3/8”-16 hardware or BFVSL-1/2
for 1/2”-13 hardware. Mount kit below clamp when used in vertical strut to
prevent clamp slipping.
• If non-metallic hardware is required, add N to the part number.
Example: BFV2008N

Nominal Pipe Size Design Load Maximum Torque

in. mm Lbs. kN in.-Lbs. N•m
Part No.

BFV2008 /2
1 (15) 300 (1.33) 10 (1.13)
BFV2009 /4
3 (20) 300 (1.33) 10 (1.13)
BFV2010 1 (25) 300 (1.33) 10 (1.13)
BFV2011 11/4 (32) 300 (1.33) 10 (1.13)
BFV2012 11/2 (40) 300 (1.33) 10 (1.13)
BFV2013 2 (50) 300 (1.33) 10 (1.13)
BFV2014 21/2 (65) 300 (1.33) 10 (1.13)
BFV2015 3 (80) 300 (1.33) 10 (1.13)
BFV2016 31/2 (90) 300 (1.33) 10 (1.13)
BFV2017 4 (100) 300 (1.33) 10 (1.13)
Reference page 182 for general fitting specifications.
Strut Systems 191
Fiberglass
Stop-Lock Kit for vertical installation

Max.
Torque
in.-Lbs. N•m

10 (1.13)
36 (4.07)
36 (4.07)
 Design Load
Stop-Lock Kit for vertical installation

or general fitting specifications.

191
 Fiberglass
BFP2400 SERIES
2-HOLE PIPE CLAMPS
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyester

Design
Load
Fiberglass Materials

15 /8
” 13/32”
(41.3
(10.3)
)
Hole Dia.
Pipe
Size
Part No. Nominal A B Design Load A
Pipe Size in. mm in. mm Lbs. kN
in. mm B

BFP2400-2 2 (50) 23/8 (60) 51/2 (140) 115 (0.51)

BFP2400-3 3 (80) 3 /2
1 (89) 6 /4
3 (171) 130 (0.58)
BFP2400-4 4 (100) 41/2 (114) 73/4 (197) 150 (0.66)
BFP2400-6 6 (150) 65/8 (168) 10 (254) 150 (0.66)

BFV751 & BFV751J /2”-13 x 2” (50.8)

1

Screw
BEAM CLAMP
41/4”
• Design Load Safety Factor of 3
(108.0)
• BFV751J (clip included) must be used when installed on Tapped for Hanger Rod Size A
tapered flange beams.
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316 ASTM F593 Group 2,
S4

3”
(76.2)
Part No. For Hanger Rod Size Design Load Torque
A Lbs. kN ft.-Lbs. N•m

BFV751-3/8 3
/8”-16 500 (2.22) 10 (13)
BFV751J-3/8 3
/8”-16 500 (2.22) 10 (13)
BFV751-1/2 1
/2”-13 500 (2.22) 10 (13)
BFV751J-1/2 1
/2”-13 500 (2.22) 10 (13)
BFV751-5/8 5
/8”-11 500 (2.22) 10 (13)
BFV751J-5/8 /8”-11
5
500 (2.22) 10 (13)
Reference page 182 for general fitting specifications.
192
13/32”
(10.3)
Hole Dia.

BFV751 BFV751J
(Clamp (Clamp and Retainer Clip)
Only) BFVATR3/8”
1” & BFPUATRHN
(25.4) (Order Separately)
11/8”
(28.6)
Strut Systems
 BFV755
BEAM CLAMP
• Design Load Safety Factor of 3
• Material: Glass Reinforced Polyurethane
• Setscrew material: Stainless Steel 316 ASTM F593 Group
2, S4
25/8”
(66.7)

3”
(76.2)
3
/ 4”
(19.0)
Tapped
for
Hanger
Rod Size
BFV3104 SERIES A
CLEVIS HANGERS C
• Design Load Safety Factor of 3 at 120°F (49°C).
• Insulation may be required at higher temperatures.
• Order hanger rod and nuts separately.
• Material: Glass Reinforced Polyurethane For BFV3104-1 thru BFV3104-
6
• Material: Glass Reinforced Polyester & Vinyl Ester For BFV3104-8 thru
BFV3104-12
C

Part No. For Hanger Rod Size Design Load Torque

A Lbs. kN ft.-Lbs. N•m A
A B
BFV755-3/8 3
/8”-16 400 (1.78)B 10 (13)
BFV755-1/2 1
/2”-13 400 (1.78) 10 (13)
Fiberglass Materials

BFV3104-1 thru BFV3104-6 BFV3104-8 thru BFV3104-12

Part No. Nominal Pipe A B C Hanger Design Load
Size in. mm in. mm in. mm Rod Size Lbs. kN
in. mm

BFV3104-1 1 (50) 11/2 (38) 41/4 (108) 11/4 (32) 1

/2”-13 670 (2.98)
BFV3104-11/2 1 /2
1 (65) 2 (51) 51/8 (130) 11/4 (32) 1
/2”-13 670 (2.98)
BFV3104-2 2 (50) 21/2 (63) 61/2 (165) 11/4 (32) 1
/2”-13 730 (3.25)
BFV3104-21/2, 3, 4 21/2-4 (65-100) 51/8 (130) 10 (254) 11/2 (38) 1
/2”-13 1150 (5.11)
BFV3104-6 6 (150) 63/4 (171) 125/16 (313) 2 (51) 1
/2”-13 1170 (5.20)
 Part No. Nominal A B C Hanger Rod Design Load
Pipe Size in. mm in. mm in. mm Size Lbs. kN
in. mm

BF*3104-8 8 (200) 91/4 (235) 165/8 (422) 3 (76) /8”-11

5
350 (1.55)
BF*3104-10 10 (250) 113/8 (289) 19 /8 (505)
7
4 (101) /8”-11
5
450 (2.01)
BF*3104-12 12 (300) 131/2 (343) 223/8 (568) 5 (127) /8”-11
5
600 (2.69)
*Specify P for polyester or V for Vinyl ester.
Reference page 182 for general fitting specifications.
Strut Systems 193
 Fiberglass
1
/2”-13 x 2” (50.8)
Screw

thru BFV3104-12
al fitting specifications.
 Fiberglass
BF*409 SERIES
BRACKETS 6” (152) TO 24” (609) LONG
• Design Load Safety Factor of 3 based on uniform loading
• MH1 - From Top of Bracket to center of Mounting Hole
• MH2 - From Bottom of Bracket to center of Mounting Hole
Fiberglass Materials

Design Load
Part No. A Lbs. kN
in. mm

BF*409-6 10 (250) 1400 (6.22)

BF*409-9 13 (330) 1000 (4.45)
BF*409-12 16 (406) 800 (3.56)
BF*409-18 22 (559) 675 (3.00)
BF*409-24 28 (711) 450 (2.00)
* Insert P for Glass Reinforced Polyester Resin or V for Glass Reinforced
Vinyl Ester Resin
BF*494 SERIES
BRACKETS 24” (609) TO 36” (914) LONG
• Design Load Safety Factor of 3 based on uniform loading
• MH1 - From Top of Bracket to center of Mounting Hole
• MH2 - From Bottom of Bracket to center of Mounting Hole
• Material: Glass Reinforced Vinyl Ester or Polyester

Design Load
Part No. A B Lbs. kN
in. mm in. mm

BF*494-24 28 (711) 23 (584) 750 (3.33)

BF*494-30 34 (863) 26 (660) 750 (3.33)
BF*494-36 40 (1016) 29 (736) 750 (3.33)
* Insert P for Glass Reinforced Polyester Resin or V for Glass 11/4”
Reinforced Vinyl Ester Resin (31.7)
Reference page 182 for general fitting specifications.
194
 11/4”
(31.7)

11 /4
”
(31.7
)
A
MH1

11/4”
B
(31.7)
pecifications.
Strut Systems

11 /4
”
(31.7
)
 11 /4
”
(31.7 A
)
MH1 MH2 13/32"(10.3)
Dia.
Mounting
Holes

12"
(304.
8)

MH2 13/32”(10.3)
Dia.
Mounting
Holes
BFV201
SQUARE WASHER FOR 3/8” BOLT
• Material: Injection Molded Glass Reinforced Polyurethane
15/8”
(41.3)
13
/32” (10.3)
Diameter Hole

BFV340
TWO HOLE FLAT PLATE
• Material: Injection Molded Glass Reinforced Polyurethane
15/8”
(41.3)
31/4”
(82.5)

BFV141
THREE HOLE FLAT PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

53/8”
 (136.5)
Fiberglass Materials

Reference page 182 for general fitting specifications

Strut Systems 195
 Fiberglass
BFV202
SQUARE WASHER FOR 1/2” BOLT
• Material: Injection Molded Glass Reinforced Polyurethane
15/8”
(41.3)
9
/16” (14.3)
Diameter Hole

BFV129
TWO HOLE SPLICE PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

BFV557
THREE HOLE FLAT PLATE
• Material: Injection Molded Glass Reinforced Polyurethane
47/8”
(123.8)
15/8” 5
1 /8”
(41.3) (41.3)
47/8”
(123.8)
15/8” 5
1 /8”
(41.3) (41.3)

Reference page 182 for general fitting specifications.

195
 Fiberglass
BFV341
FOUR HOLE SPLICE PLATE
• Material: Injection Molded Glass Reinforced Polyurethane
71/4”
(184.1)

BFV140
THREE HOLE FLAT CORNER PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

31/2”
(88.9)

BFV132
FIVE HOLE FLAT CROSS PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

53/8”
(136.5)

53/8”

(136.5)
Fiberglass Materials

Reference page 182 for general fitting specifications.

196
 BFV342
FIVE HOLE FLAT PLATE
• Material: Injection Molded Glass Reinforced Polyurethane
91/8”
(231.8)

BFV143
FOUR HOLE FLAT CORNER PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

53/8”
(136.5)

BFV133
FOUR HOLE FLAT TEE PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

53/8”
 (136.5)

for general fitting specifications.

196 Strut Systems
BFV135
THREE HOLE FLAT GUSSET CORNER PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane
31/2”
(88.9)

31/2”

(88.9)

BFV337
THREE HOLE FLAT GUSSET TEE PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

31/2”
(88.9)

BFV532
FIVE HOLE FLAT GUSSET TEE PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

53/8”
(136.5)
53/8"
(136.5)
Fiberglass Materials

Reference page 182 for general fitting specifications

Strut Systems 197
BFV142
FOUR HOLE FLAT GUSSET CORNER PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane
31/2”
(88.9)

53/8”

(136.5)

BFV136
FOUR HOLE FLAT GUSSET TEE PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

53/8”
(136.5)

BFV334
SEVEN HOLE FLAT GUSSET CROSS PLATE
• Material: Injection Molded Glass Reinforced
Polyurethane

91/8”
(231.8)

53/8”
 (136.5)

Reference page 182 for general fitting specifications.

197
BFV101
TWO HOLE 90° CORNER ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane

15/8”
(41.3)

25/16”
(58.7)

BFV104
FOUR HOLE 90° CORNER ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”
(88.9)

41/8”
(104.8)

BFV558
FOUR HOLE 90° CORNER ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane
31/4”
(82.5)
21/4”
(57.1)
15/8”
(41.3)

15/8”
(41.3)
 15/8”
(41.3)
Fiberglass Materials

Reference page 182 for general fitting specifications.

198
BFV103
THREE HOLE 90° CORNER ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane
15/8”
(41.3)

41/8”
(104.8)

BFV118
FOUR HOLE 90° GUSSETTED SHELF ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane

31/2”

15/8” (88.9)
(41.3)

41/8”
(104.8)

BFV371-2G
THREE HOLE 90° GUSSETTED CORNER ANGLE
• Material: Injection Molded Glass Reinforced
Polyurethane

THREE HOLES
.400” Dia. (10.1)

4”
(101.6)
 15/8”
(41.3)

for general fitting specifications.

198 Strut Systems
BFV280SQ
POST BASE FOR BF*22
• Material: Glass Reinforced Polyurethane
3”
(76.2)
5”
(127.0) 5”
(127.0)

BFV650
CHANNEL SPACER
• Spacer I.D. accommodates 3/8" rod or bolts.
• Material: Polyurethane
Used when attaching fittings to side walls of channel. This channel
spacer prevents wall compression in heavy load conditions.
Fiberglass Materials

Reference page 182 for general fitting specifications

Strut Systems 199
BFV281SQ
POST BASE FOR BF*22A
• Material: Glass Reinforced Polyurethane
3”
(76.2)
5”
(127.0) 5
6 /8”
(168.3)

B217P
PLASTIC CLOSURE STRIP
• Available in 10 Ft. (3.05 m) lengths.
• Material: PVC
17/16”
(36.5)
5
/ 8” (15.9)
Reference page 182 for general fitting specifications.
199
 Mini Channel & Fittings
Our mini channels and fittings provide for an economical method of supporting light load requirements o
Channel
Channels are cold formed on our modern rolling mills from 18 Ga. (1.2 mm) low carbon steel strips plain s
PSI min. yield) and pre- galvanized steel strips, (ASTM A653 33,000 PSI min. yield). A continuous slot with
ability to make attachments at any point. Channel combinations are made with new state of the art, high
Lengths
Standard lengths are 10’ (3.05 m) and 20’ (6.09 m) for B62 series, and 10’ (3.05 m) for B72 series. Custom len
Fittings
Mini fittings are formed from hot rolled pickled and oiled strip or sheet steel (ASTM A1011, HSLAS, Grade
dimensions apply to all fittings except as noted on the drawings:
Hole Size–9/32” (7.14 mm) Dia.
Hole Spacing–13/32” (10.3 mm) from end and 11/16” (27.0 mm) on center.
Width–13/16” (20.6 mm)
Thickness–1/8” (3.2 mm)
Materials & Finishes*
Mini Channel & Fittings

Finish
Code Finish Specification

PLN Plain ASTM A1011, HSLAS,

Grade 50, Class 1
ZN Electro-Plated Zinc ASTM B633 SC3 Type II
GRN DURA-GREEN™
GLV Pre-Galvanized ASTM A653
33,000 PSI min. yield
HDG Hot-Dipped Galvanized ASTM A123
*Unless otherwise noted.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

200
ng light load requirements on a metal framing system.

ow carbon steel strips plain steel (ASTM A1008 33,000

yield). A continuous slot with inturned lips provides the
ith new state of the art, high-tech welding equipment.

m) for B72 series. Custom lengths are available.

(ASTM A1011, HSLAS, Grade 50, Class1). The following

ensions are in millimeters.

Strut Systems
 B62 Chan
• Thickness: 18 Ga. (1.2 mm)
13
/16” 13
/16” (20.6)
(20.6)

• Standard lengths: 10’ (3.05 m) 3

/16” 7

& 20’ (6.09 m) (4.7) /

1 Y
• Standard finishes: Plain, DURA-GREEN™, Pre- 6
Galvanized X 15/8”
”
• Weight: .42 Lbs./Ft. (.62 kg/m)
(

3
/16”
(4.7)
3
13
/16” X
(20.6) .346 Y
.406 (8.8) .406
(10.3) (10.3)

B62A
Wt. .84 Lbs./Ft. (1.25 kg/m)
SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section Radius of

Channel Weight Section Inertia (I) in.4 Modulus (S) in.3 Gyration (r) Inertia (I) in.4 Modulus (S) Gyration (r)
lbs./ft. kg/m sq. in. cm2 cm4 cm3 in. cm cm4 in.3 cm3 in. cm

B62 .420 (.62) .123 (.80) .0103 (.43) .0221 (.36) .289 (.73) .0134 (.56) .0330 (.54) .330
B62A .839 (1.25) .247 (1.59) .0500 (2.08) .0616 (1.01) .450 (1.14) .0269 (1.12) .0663 (1.09) .330
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel D
BEAM LOADING
Mini Channel & Fittings

Uniform Load @ Deflection = 1/240 Span

Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B62 B62A 364 (1.62) .027 (.68) 364 (1.62) 364
420* (1.87) .006 (.15) 420* (1.87) 420*
24 (609) B62 B62A 182 (0.81) .109 (2.77) 167 (0.74) 111
420* (1.87) .051 (1.29) 420* (1.87) 420*
36 (914) B62 B62A 121 (0.54) .245 (6.22) 74 (0.33) 50
341 (1.51) .141 (3.58) 341 (1.51) 242
48 (1219) B62 B62A 91 (0.40) .436 (11.07) 42 (0.18) 28
256 (1.14) .250 (6.35) 204 (0.91) 136
60 (1524) B62 B62A 73 (0.32) .681 (17.30) 27 (0.12) 18
205 (0.91) .391 (9.93) 131 (0.58) 87
 72 (1829) B62 B62A 61 (0.27) .981 (24.92) 19 (0.08) 12
170 (0.75) .563 (14.30) 91 (0.40) 61
Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING
Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B62 2052 (9.13) 820 (3.65) 2161 (9.61) 1890 (8.41) 1715
B62A 4666 (20.75) 1449 (6.44) 4710 (20.95) 4593 (20.43) 4503
24 (609) B62 1350 (6.00) 645 (2.87) 1624 (7.22) 1020 (4.54) 818
B62A 4275 (19.01) 1367 (6.08) 4453 (19.81) 3982 (17.71) 3624
36 (914) B62 818 (3.64) 471 (2.09) 1053 (4.68) 633 (2.81) 515
B62A 3624 (16.12) 847 (3.77) 4023 (17.89) 2965 (13.19) 2179
48 (1219) B62 589 (2.62) 369 (1.64) 745 (3.31) 456 (2.03) 365**
B62A 2713 (12.06) 504 (2.24) 3421 (15.21) 1765 (7.85) 1225
60 (1524) B62 456 (2.03) 300 (1.33) 579 (2.57) 347** (1.54) 271**
B62A 1765 (7.85) 323 (1.44) 2647 (11.77) 1129 (5.02) 784**
72 (1829) B62 365** (1.62) 248 (1.10) 470 (2.09) 271** (1.20) –
B62A 1225 (5.45) 224 (0.99) 1856 (8.25) 784** (3.49) 545**
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 200 for general fitting specifications.

Strut Systems 201
 B62 Channel
13
/16” (20.6)

Y
X 15/8”

X (41.3)
Y 13
/16” (20.6)
.406
(10.3)

.25 kg/m)
- Y Axis

Radius of
Gyration (r)
in. cm

.330 (.84)
.330 (.84)

AISI Cold-Formed Steel Design Manual.

eflection = 1/240 Span

1/360 Span
Lbs. kN

(1.62)
(1.87)

(0.49)
(1.87)

(0.22)
(1.07)

(0.12)
(0.60)

(0.08)
(0.39)
 (0.05)
(0.27)

nce with MFMA, with adequate lateral bracing (see page 11

ed load capacity at mid span, multiply uniform load by 0.5

@ C.G.)
K = 1.2
Lbs. kN

1715 (7.63)
4503 (20.03)

818 (3.64)
3624 (16.12)

515 (2.29)
2179 (9.69)

365** (1.62)
1225 (5.45)

271** (1.20)
784** (3.49)

– –
545** (2.42)
adius of gyration. r

fitting specifications.
 B72 Channel 3
/
1
• Thickness: 18 Ga. (1.2 mm) 1

3 6 /16”
13
(20.6)
• Standard lengths: 10’ (3.05 m) ” Y
• Standard finishes: Plain, DURA-GREEN™, Pre- / X
1 (
Galvanized 6 4 Y
• Weight: .29 Lbs./Ft. (.43 kg/m) 3/16” .
” 7
13 (4.7)
)
(
2
0 3
/
. 3
6 2
/32” ” (2.4)
(10.3) .160
.406
B72A

(4.0) Wt. .58 Lbs./Ft. (.87

(10.3)

SECTION PROPERTIES X - X Axis Y - Y Axis

Areas of Moment of Section Radius of Moment of Section Radius of

Channel Weight Section Inertia (I) Modulus (S) Gyration (r) Inertia (I) Modulus (S) Gyration (r)
lbs./ft. kg/m sq. in. cm2 in.4 cm4 in.3 cm3 in. cm in.4 cm4 in.3 cm3 in. cm

B72 .287 (.43) .084 (.54) .0018 (.07) .0073 (.12) .146 (.37) .0077 (.32) .0190 (.31) .302
B72A .574 (.85) .169 (1.09) .0078 (.32) .0192 (.31) .215 (.55) .0155 (.65) .0382 (.63) .303
Calculations of section properties are based on metal thicknesses as determined by the AISI Cold-Formed Steel D
BEAM LOADING
Mini Channel & Fittings

Uniform Load @ Deflection = 1/240 Span

Beam Span Channel Uniform Load and Deflection 1/360 Span
In. mm Style Lbs. kN In. mm Lbs. kN Lbs. kN

12 (305) B72 B72A 116 (0.51) .051 (1.29) 113 (0.50) 75

210* (0.93) .020 (.51) 210* (0.93) 210*
24 (609) B72 B72A 58 (0.26) .206 (5.23) 28 (0.12) 19
159 (0.71) .125 (3.17) 127 (0.56) 85
36 (914) B72 B72A 39 (0.17) .465 (11.81) 13 (0.06) 8
106 (0.45) .281 (7.14) 57 (0.25) 38
36 (1219) B72 B72A 29 (0.13) .827 (21.00) 7 (0.03) 5
80 (0.35) .500 (12.70) 32 (0.14) 21
60 (1524) B72 B72A 23 (0.10) 1.292 (32.81) 5 (0.02) 3
64 (0.28) .782 (19.86) 20 (0.09) 14
 Based on simple beam condition using an allowable design stress of 25,000 psi (172 MPa) in accordance with MFMA, with adequ
for further explanation). Actual yield point of cold rolled steel is 42,000 psi. To determine concentrated load capacity at mid spa
and corresponding deflection by 0.8. *Failure determined by weld shear.
COLUMN LOADING

Unbraced Height Channel Max. Column Loading K = .80 Max. Column Loading (Loaded @ C.G.)
In. mm Style Loaded@ Loaded@ K = .65 K = 1.0 K = 1.2
C.G. Slot Face Lbs. kN Lbs. kN Lbs. kN
Lbs. kN Lbs. kN

12 (305) B72 1598 (7.11) 539 (2.40) 1712 (7.61) 1410 (6.27) 1181
B72A 3600 (16.01) 986 (4.38) 3700 (16.46) 3433 (15.27) 3229
24 (609) B72 701 (3.12) 320 (1.42) 1050 (4.67) 450 (2.00) 313**
B72A 2710 (12.05) 802 (3.57) 3113 (13.85) 2043 (9.09) 1421
36 (914) B72 313** (1.39) 188 (0.83) 473 (2.10) 201** (0.89) –
B72A 1421 (6.32) 569 (2.53) 2135 (9.50) 909 (4.04) 631**
36 (1219) B72 177** (0.79) 122 (0.54) 267** (1.19) – – –
B72A 799 (3.55) 404 (1.80) 1211 (5.39) 512** (2.28) 355**
60 (1524) B72 113** (0.50) 85 (0.38) 171** (0.76) – – –
B72A 512** (2.28) 298 (1.32) 775 (3.45) 327** (1.45) –
**Where the slenderness ratio KL exceeds 200, and K = end fixity factor, L = actual length and r = radius of gyration. r

Reference page 200 for general fitting specifications.

202
 /16”
13
(20.6)
Y
X
Y
X 13
/16” (20.6)
.406

.406 (10.3)
(10.3)

B72A

Wt. .58 Lbs./Ft. (.87 kg/m)

- Y Axis

Radius of
Gyration (r)
in. cm

.302 (.77)
.303 (.77)
AISI Cold-Formed Steel Design Manual.

eflection = 1/240 Span

1/360 Span
Lbs. kN

(0.32)
(0.93)

(0.08)
(0.38)

(0.03)
(0.17)

(0.02)
(0.09)

(0.01)
(0.06)
nce with MFMA, with adequate lateral bracing (see page 11
ed load capacity at mid span, multiply uniform load by 0.5

@ C.G.)
K = 1.2
Lbs. kN

1181 (5.25)
3229 (14.36)

313** (1.39)
1421 (6.32)

– –
631** (2.81)
– –
355** (1.58)

– –
– –
adius of gyration. r

Strut Systems
 Mini Channel Nuts & Fittings
NUTS FOR B62, B72 CHANNEL
SPRING NUT NUT WITHOUT SPRING
Part Number Thread Size
B62 B72 Wt./C
With Without With Without Lbs. kg
Spring Spring Spring Spring Thickness
N621 N621WO N7221 N621WO #8-32 .150 (3.81) 1.0
N622 N622WO N7222 N622WO #10-24 .150 (3.81) 1.0
N627 N627WO N7227 N627WO #10-32 .150 (3.81) 1.0
N624 N624WO N7224 N624WO 1
/4-20 .150 (3.81) 1.0
BMM-3L BMM-3 BMM-3S BMM-3 M3.5 x 0.6 .150 (3.81) 1.0
BMM-4L BMM-4 BMM-4S BMM-4 M4 x 0.7 .150 (3.81) 1.0
BMM-5L BMM-5 BMM-5S BMM-5 M5 x 0.8 .150 (3.81) 1.0
BMM-6L BMM-6 BMM-6S BMM-6 M6 x 1 .150 (3.81) 1.0
Mini Channel & Fittings

MINI FITTINGS
B6202 B6129 B6340
SQUARE WASHER TWO HOLE SPLICE PLATE TWO HOLE SPLICE PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 2 Lbs. (.9 kg) • Wt./C 5 Lbs. (2.2 kg) • Wt./C 5 Lbs. (2.2 kg)

13
/16” 17/8”
(20.6) (47.6) 15/8”
9
/32” (7.1) DIA. (41.3)
13
/16”

(20.6)
 Reference page 200 for general fitting specifications.
Strut Systems 203
ts & Fittings

Wt./C
Lbs. kg

(.45)
(.45)

(.45)
(.45)

(.45)
(.45)

(.45)
(.45)

SPLICE PLATE
nishes: ZN, GRN
. (2.2 kg)
eral fitting specifications.
B6141 B600-62
THREE HOLE SPLICE PLATE THREE HOLE FLAT ADAPTER PLATE
• Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 19 Lbs. (8.6 kg)
• Wt./C 7 Lbs. (3.2 kg) 15/8” 1
4 /8”
(41.3)
(104.8)
B22 B62
215/16”
(74.6)

B6341 B6138
FOUR HOLE SPLICE PLATE TWO HOLE SWIVEL PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg) • Wt./C 7 Lbs. (3.2 kg)
4” 211/16”
(101.6) (68.2)
17/8”
(47.6)

B6504 B6140
FOUR HOLE SPLICE PLATE THREE HOLE CORNER PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg) • Wt./C 8 Lbs. (3.6 kg)

17/8”
(47.6) 5
1 /8”
(41.3) 17/8”
(47.6)
17/8”

13
/16” (47.6)
Mini Channel & Fittings (20.6)

Reference page 200 for general fitting specifications.

204
B6557
THREE HOLE SPLICE PLATE
• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)
27/16”
(61.9)

/16”
13

(20.6)

B6139
THREE HOLE SWIVEL PLATE
• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)
33/4”
(95.2)
17/8”
(47.6)

B6143
FOUR HOLE CORNER PLATE
• Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg)

17/8”
(47.6)

215/16”
 (74.6)

ecifications.
Strut Systems
B6133 B6132
FOUR HOLE TEE PLATE FIVE HOLE CROSS PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 11 Lbs. (5.0 kg) • Wt./C 13 Lbs. (5.9 kg)

17/8” 215/16”
(47.6) (74.6)

215/16”
(74.6) 215/16”
(74.6)

B6142 B6337
FOUR HOLE THREE HOLE
CORNER GUSSET PLATE TEE GUSSET PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg) • Wt./C 10 Lbs. (4.5 kg)
17/8” 17/8”
(47.6) (47.6)
215/16” 17/8”
(74.6) (47.6)

B6532 B6101
FIVE HOLE TWO HOLE CORNER ANGLE
TEE GUSSET PLATE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 22 Lbs. (10.0 kg) • Wt./C 5 Lbs. (2.2 kg)
215/16”
(74.6)
215/16”
(74.6)
13
/16” (20.6)
 (74.6)

11/4”
(31.7)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

Strut Systems 205
B6135
THREE HOLE CORNER GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 9 Lbs. (4.1 kg)
17/8”
(47.6)
17/8”
(47.6)

B6136
FOUR HOLE
TEE GUSSET PLATE
• Standard finishes: ZN, GRN
• Wt./C 15 Lbs. (6.8 kg)
17/8”
(47.6)
215/16”
(74.6)

B6230
TWO HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Wt./C 5 Lbs. (2.2 kg)

15
/16” (23.8)
 11/8”
(28.6)

erence page 200 for general fitting specifications.

205
B6102 B6103 B6232
THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE THREE HOLE CORNER ANGLE
• Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Wt./C 7 Lbs. (3.2 kg)
• Wt./C 8 Lbs. (3.6 kg) • Wt./C 8 Lbs. (3.6 kg) /16” (23.8)
15

23/16”
(55.5)
13
/16”

17/8” (20.6)
(47.6)

25/16”
(58.7)
1 / 4”
1

(31.7)

B6374 B6104 B6558

THREE HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE FOUR HOLE CORNER ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg) • Wt./C 10 Lbs. (4.5 kg) • Wt./C 10 Lbs. (4.5 kg)

11/8”
(28.6)
17/8” /16”
13

(20.6)

(47.6)

11/4”

25/16” (31.7)

(58.7)
2” 13
/16”
(50.8) (20.6)
(41.3)

B6357 B6239 B6144R&L

FOUR HOLE OFFSET BENT TEE FIVE HOLE OFFSET BENT FOUR HOLE SHELF BRACKET
• Standard finishes: ZN, GRN TEE
• Wt./C 11 Lbs. (5.0 kg) • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
1 / 8”
1
• Wt./C 14 Lbs. (6.3 kg) • Wt./C 19 Lbs. (8.6 kg)
(28.6) 215/16”
215/16” 11/8” (74.6)
(74.6) (28.6)
17/8”

(47.6)

17/8” 25/16”
(47.6) (58.7)

(Right shown)
 15
/16”
(23.8)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

206
32
E HOLE CORNER ANGLE
ndard finishes: ZN, GRN
C 7 Lbs. (3.2 kg)
(23.8)

58
HOLE CORNER ANGLE
ndard finishes: ZN, GRN
C 10 Lbs. (4.5 kg)

/16”
13

(20.6)

11/4”
(31.7)

/16”
15/8”
(41.3)

44R&L
HOLE SHELF BRACKET
ndard finishes: ZN, GRN
C 19 Lbs. (8.6 kg)

17/8”

(47.6)

25/16”
(58.7)

ht shown)
15
/16”
(23.8)

Strut Systems
B6134R&L B6234 R&L B6118
FOUR HOLE CORNER GUSSET FOUR HOLE CORNER GUSSET FOUR HOLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN GUSSETTED SHELF ANGLE
• Wt./C 15 Lbs. (6.8 kg) • Wt./C 15 Lbs. (6.8 kg) • Standard finishes: ZN, GRN
23/16” 17/8” • Wt./C 15 Lbs. (6.8 kg)
(55.5) (47.6) 17/8”
17/8” 25/16” (47.6) 15/16”
(47.6) (58.7) (23.8)
(Left shown) 15/16”
(23.8) (Left shown) 25/16”
(58.7)

B6533 B6126 B6127

FIVE HOLE FOUR HOLE GUSSETTED THREE WAY FIVE HOLE GUSSETTED THREE WA
GUSSETTED SHELF ANGLE SHELF ANGLE SHELF ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 22 Lbs. (10.0 kg) • Wt./C 15 Lbs. (6.8 kg) • Wt./C 18 Lbs. (8.1 kg)
13
/16” 17/8” 17/8”
25/16”
(20.6) (47.6) 17/8” (47.6) 17/8”
(58.7) (47.6) (47.6)
215/16” 11/4” 25/16”
(74.6) (31.7) (58.7)

B6112 B589-62
FOUR HOLE ADJUSTABLE CORNER TWO HOLE 90° ADAPTER
ANGLE ANGLE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 32Lbs. (14.5 kg) • Wt./C 11 Lbs. (5.0 kg)
9
/32” (7.1) x 3/4” (19.0) SLOTS B62
27/16” B22
(61.9) 15/8”
4” (41.3)
(101.6)

23/16”
(55.6)

15
/16”
(23.8)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

Strut Systems 207
6118
OUR HOLE
USSETTED SHELF ANGLE
Standard finishes: ZN, GRN
Wt./C 15 Lbs. (6.8 kg)
8”
7.6) 15/16”

3.8)
16”
8.7)

6127
VE HOLE GUSSETTED THREE WAY
HELF ANGLE
Standard finishes: ZN, GRN
Wt./C 18 Lbs. (8.1 kg)
8”
7.6) 17/8”
7.6)
16”
8.7)

13
/16”
(20.6)

117/32”
(38.9)

15/8”
 (41.3)

00 for general fitting specifications.

207
B6147-B6152 B6154
TWO HOLE OPEN ANGLE TWO HOLE OPEN ANGLE
• Standard finishes: ZN, GRN B • Standard finishes: ZN, GRN
13
/32” • Wt./C 8 Lbs. (3.6 kg)
(10.3) C
123/32”
(43.6)
13
/32” (10.3) 13
/32” (10.3)
45° 13/16”
(30.1)
13
/32” (10.3)

B6162-B6165 B6156-B6161 13/32”

TWO HOLE OPEN ANGLE TWO HOLE CLOSED ANGLE (10.3)

• Standard finishes: ZN, GRN13/32” A • Standard finishes: ZN, G

(10.3)
17/8”
(47.6)
13/ 11/32”
32”
(26.2)
(10.3)

Part No. A B

Wt./C B6156 821/2° 19/32” (32.5)

Part No. A Lbs. kg
B6157 75° 15/16” (33.3)
B6162 30° 8.0 B6158 671/2° 13/8” (34.9)
B6163 221/2° B6159 60° 113/32” (35.7)
(3.6)
B6164 15° B6160 521/2° 115/32” (37.3)
B6165 71/2° B6161 371/2° 121/32” (42.0)

B6155 B601-62 B6169

TWO HOLE CLOSED ANGLE TWO HOLE 45° ADAPTER ANGLE TWO HOLE SPLICE CLEVIS FOR B72
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 8 Lbs. (3.6 kg) • Wt./C 14 Lbs. (6.3 kg) • Wt./C 11 Lbs. (5.0 kg)
/32” B62
13
17/8”
(10.3) 17/8” B22 B72 (47.6)
(47.6) 113/64”
45° (30.5)
13/32”
19/16” 15/8” 45°
(10.3) (39.7) (41.3)
15/8”
(41.3)
 Wt./C
Part No. A B C Lbs. kg

B6147 821/2° 21/32” (51.6) 27/32” (21.4)

B6148 75° 21/32” (51.6) 27/32” (21.4)
B6149 671/2° 2” (50.8) /”
7 8 (22.2)
8.0 (3.6)
B6150 60° 1 /32” (50.0) 1 /16”
31 5 (23.8)
B6151 521/2° 17/8” (47.6) 11/16” (27.0)
B6152 371/2° 2” (50.8) 29/32” (23.0)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

208
161 13/32” 17/8”
CLOSED ANGLE (10.3) (47.6)

• Standard finishes: ZN, GRN

A
B

Wt./C
Lbs. kg

8.0 (3.6)

LE SPLICE CLEVIS FOR B72

d finishes: ZN, GRN
1 Lbs. (5.0 kg)

.6)
Strut Systems
B6168 B6167
THREE HOLE SPLICE CLE- VIS FOR FOUR HOLE SPLICE CLEVIS FOR B72
B72 • Standard finishes: ZN, GRN
• Standard finishes: ZN, GRN • Wt./C 24 Lbs. (10.9 kg)
• Wt./C 16 Lbs. (7.2 kg) 4”
215/16” (101.6)
(74.6) B72
B72

B6171 B6172
THREE HOLE SPLICE CLEVIS FOR B62 FOUR HOLE SPLICE CLEVIS FOR B62
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 26 Lbs. (11.8 kg) • Wt./C 36 Lbs. (16.3 kg)
215/16” 4”
B62 (74.6) (101.6)
B62

B6107 B6107-62A
THREE HOLE U-SUPPORT THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 12 Lbs. (5.4 kg) • Wt./C 16 Lbs. (7.2 kg)

13
/16” (20.6)
15/8”
(41.3)

231/32” 231/32”
(75.4)

(75.4)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

Strut Systems 209
 B6170
TWO HOLE SPLICE CLEVIS FOR B62
• Standard finishes: ZN, GRN
• Wt./C 17 Lbs. (7.7 kg)
17/8”
B62 (47.6)

B7116
THREE HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 10 Lbs. (4.5 kg)
13
/32” (10.3)
231/32”
(75.4)

B6594
FIVE HOLE U-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 13 Lbs. (5.9 kg)
121/32”
15
/16”(42.0)
(23.8)
317/32”
(89.7)
erence page 200 for general fitting specifications.
209
B6173 B6526
FOUR HOLE CLEVIS TWO HOLE
• Standard finishes: ZN, GRN OFFSET Z-SUPPORT
• Wt./C 9 Lbs. (4.1 kg) • Standard finishes: ZN, GRN
15
/16” (23.8) • Wt./C 5 Lbs. (2.2 kg)
121/ ”
13
/16” 1
/8” (3.2)
32
(20.6) 13/4”
(42.0) (44.4)
/16”
13

(20.6)

B7105 B6110
TWO HOLE TWO HOLE
Z-SUPPORT FOR B72 Z-SUPPORT FOR B62A
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg) • Wt./C 9 Lbs. (4.1 kg)
13
/32” (10.3) 13/4”
17/8” (44.4)
(47.6) 13/4”
(44.4)
13
/16” (20.6)
 B598-62 B6571
TWO HOLE Z-ADAPTER PLATE EIGHT HOLE WING CONNECTION
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 28 Lbs. (12.7 kg) • Wt./C 28 Lbs. (12.7 kg)
B62
13
/16” 229/32”
(20.6) (73.8)
15/8” 17/8”
(41.3) 23/4” (47.6)
(69.8) 17/8”
B22 (47.6) 13
/16”
(20.6)
Mini Channel & Fittings

Reference page 200 for general fitting specifications.

210
 B6105
TWO HOLE
Z-SUPPORT FOR B62
• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)
13
/16” (20.6)
17/8”
(47.6)

B6108
TWO HOLE
OFFSET Z-SUPPORT
• Standard finishes: ZN, GRN
• Wt./C 7 Lbs. (3.2 kg)
15
/16” (23.8)
13/4”
(44.4)
OLE WING CONNECTION
d finishes: ZN, GRN
8 Lbs. (12.7 kg)

13
/16”

ecifications.
Strut Systems
B6205 B7205 B6211
END CAP FOR B62 END CAP FOR B72 Z-BEAM CLAMP
• Material: ASTM A1008 SS Gr. 33 Type • Material: ASTM A1008 SS Gr. 33 Type 1 • 5/16”-18 Setscrew included
1 • Standard finishes: ZN, GRN • 13/16” (20.6) Max. Flange Thickness
• Standard finishes: ZN, GRN • Wt./C 1 Lb. (.4 kg) • Material: ASTM A36
• Wt./C 3 Lbs. (1.3 kg) 13
/32” (10.3) • Standard finishes: ZN, GRN
13
/16” (20.6) • Wt./C 13 Lbs. (5.9 kg)
3
/ 4”
(19.0) 13/16”
(20.6)
1
/4” (6.3)
17/8”
(47.6)

B6409-6, 9 B2350-B2355 13/16”

BRACKET ONE HOLE DOUBLE (20.6) 9/32” (7.1) DIA.

• Safety Factor of 2 TUBING STRAP B

• Uniform Design Load 40 Lbs. (.18 kN) • Material: ASTM A1008 SS
• Standard finishes: ZN, GRN Gr. 33 Type 1
25/16” • Standard finishes: ZN, GRN
(58.7) A
A C
B62 O.D. Size O.D.Size Wt./C Part No. A
B C Lbs. kg
B2350 / ” (6.3) 1/4”
1 4
(6.3) 3/4” (19.0) 1.2 (.5)
B2351 / ” (9.5) 3/8”
3 8
(9.5) 1” (25.4) 2.0 (.9)
B2352 / ” (12.7) 1/2” (12.7) 11/4” (31.7) 2.9
1 2
(1.3)
B2353 / ” (6.3) 3/8”
1 4
(9.5) 7/8” (22.2) 1.6 (.7)
B2354 / ” (6.3) 1/2” (12.7) 1” (25.4) 2.1
1 4
(.9)
B2355 / ” (9.5) 1/2” (12.7) 11/8” (28.6) 2.5
3 8
(1.1)

Wt./C
Part No. A Lbs. kg

B6409-6 6” (152.4) 28.0 (12.7)

B6409-9 9” (228.6) 35.0 (15.8)
Mini Channel & Fittings
 B2308-B2315
ONE HOLE TUBING STRAP
• Material: Sizes 1/4” - 1/2”, ASTM A611 Gr. C
5
/8” - 1”, ASTM A1008 SS Gr. 33 Type 1
• Standard finishes: ZN, GRN

O.D. Size Wt./C

Part No. A B C Lbs. kg

B2308 /”
1 4 (6.3) 11/32” (26.2) 0.048 (1.2) 1.2 (0.5)
B2309 / ”
5 16 (7.9) 13/32” (27.8) 0.048 (1.2) 1.4 (0.6)
B2310 /”
3 8 (9.5) 13/16” (30.1) 0.048 (1.2) 1.6 (0.7)
B2311 /”
1 2 (12.7) 121/64” (33.7) 0.048 (1.2) 1.9 (0.8)
B2312 /”
5 8 (15.9) 125/64” (35.3) 0.062 (1.6) 2.7 (1.2)
B2313 /”
3 4 (19.0) 139/64” (40.9) 0.075 (1.9) 4.3 (1.9)
B2314 /”
7 8 (22.2) 151/64” (45.6) 0.075 (1.9) 4.9 (2.2)
B2315 1” (25.4) 21/32” (51.6) 0.075 (1.9) 5.2 (2.3)

Reference page 200 for general fitting specifications.

Strut Systems 211
 B6211
Z-BEAM CLAMP
• /16”-18 Setscrew included
5

• /16” (20.6) Max. Flange Thickness

13

• Material: ASTM A36

• Standard finishes: ZN, GRN
• Wt./C 13 Lbs. (5.9 kg)
3
/ 4”
(19.0) 13/16”
(20.6)
1
/4” (6.3)
17/8”
(47.6)

355 13/16”
DOUBLE (20.6) 9/32” (7.1) DIA.

RAP B
STM A1008 SS
1
finishes: ZN, GRN

.D.Size Wt./C Part No. A

Lbs. kg
(6.3) 1/4” (6.3) 3/4” (19.0) 1.2 (.5)
(9.5) 3/8” (9.5) 1” (25.4) 2.0 (.9)
(12.7) 1/2” (12.7) 11/4” (31.7) 2.9 (1.3)
(6.3) 3/8” (9.5) 7/8” (22.2) 1.6 (.7)
(6.3) 1/2” (12.7) 1” (25.4) 2.1 (.9)
(9.5) 1/2” (12.7) 11/8” (28.6) 2.5 (1.1)
 A
ence page 200 for general fitting specifications.
211

B
9/32” (7.1) Dia.

13/16”

C
(20.6)
 Continuous slot Concrete Inserts are designed to provide a pre-set support system cast in concrete ce
allow flexibility of attachment at any point along the channel. This provides an excellent support syste
cable trays.
Continuous Concrete Inserts, manufactured from Our standard channels, have formed anchors spaced
centers.
3
/16” (4.8 mm) nail-holes are provided for securing the inserts to the forms.
Available in lengths from 3 inches (7.62 cm) to 240 inches (609.6 cm), Concrete Inserts are shipped com
styrofoam filler strips which prevent seepage of concrete into the insert. Styrofoam is easily removed
pull-tab.

Materials & Finishes*

Finish
Code Finish Specification

PLN Plain ASTM A1011

33,000 PSI min. yield
GRN DURA-GREEN™
ZN Electro-Plated Zinc ASTM B633 SC1 Type III
GALV Pre-Galvanized ASTM A653
33,000 PSI min. yield
HDG Hot-Dipped Galvanized ASTM A123
SS4 Stainless Steel Type 304 ASTM A240
SS6 Stainless Steel Type 316 ASTM A240
*Unless otherwise noted.
Concrete Inserts
Spot Inserts
B-Line’s Spot Inserts provide for economical single attachment points with full flexibility of fastener si
adjustment. These products are made from steel strips in accordance with ASTM A1011, 33,000 PSI m
electro-plated zinc (ASTM B633).
Special Concrete Inserts
Pre-stressed inserts, inserts with studs welded to the back of the channel, and other types of special i
Line.
Test Data
Independent Testing Laboratory test data available upon request.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

212
 t system cast in concrete ceilings, walls, and floors to
es an excellent support system for pipe, conduit, and

have formed anchors spaced on 4 inch (101.6 mm)

rete Inserts are shipped complete with end caps and

Styrofoam is easily removed by pulling the convenient
h full flexibility of fastener sizing, but with limited
h ASTM A1011, 33,000 PSI min. yield. Standard finish is

and other types of special inserts are available from B-

ensions are in millimeters.

Strut Systems
Continuous concrete inserts, installed in the ceiling, can be used to support trapeze hangers, suspended pipe rac
multiple pipe hangers.
 When installed in walls, continuous concrete inserts can be used as a support for tunnel stanchions, equipment b

Use spot inserts for single pipe-support or trapeze type hangers. Spot Inserts offer full flexibility of rod and fasten
Concrete Inserts

B-Line Channel can be attached to continuous concrete inserts in walls or ceilings. Channel can also be attached
with expansion anchors.

Reference page 212 for general fitting and standard finish specifi
Strut Systems 213
g, can be used to support trapeze hangers, suspended pipe racks, cable trays and single or
 ts can be used as a support for tunnel stanchions, equipment braces, brackets and pipe racks.

e type hangers. Spot Inserts offer full flexibility of rod and fastener sizings.

ncrete inserts in walls or ceilings. Channel can also be attached to concrete walls and floors

ference page 212 for general fitting and standard finish specifications.
213
 Continuous Concrete Inserts
B22I MATERIAL: 12 Gauge (2.6) 4
CONTINUOUS CONCRETE INSERT 31/8” ”
(79.4) (
• Design Load for B22-I-12 thru B22-I-240 is
2,000 lbs. (8.89 kN) per foot of concrete insert B22-I-3 THRU B22-I-8 1
0
length with safety factor of 3 in 3000 psi
1
concrete. .
• Loads concentrated within the last 2 inches 6
(50.8 mm) of concrete inserts 8” (203.2 mm) and )
longer should not exceed 1,000 lbs. (4.45kN). 1
• Concrete insert should be secured to the forms 1
/
on 16” (406.4 mm) to 24” (609.6 mm) intervals. 2
• B22-I continuous concrete inserts are ”
(
3
8
made from B22 channel. Use channel nuts 25/8”15/8” . 1 S
designed for use in B22 channel. (66.7) (41.3) 5 t
• B22-I concrete inserts are supplied with y
15/8” / r
styrofoam fillers. B3322 end caps are furnished (41.3) 8
o
with inserts through 8” (203.2 mm) long, and Styrofoam Filler ” f
B205 end caps are furnished with inserts 12” ( o
(304.8 mm) and longer. 4 a
• Material: Plain Steel ASTM A1011 33,000 PSI 1 m
min. yield or Pre-Galvanized Steel ASTM .
3 F
A653SS 33,000 PSI min. yield.
) i
• Finish: Plain, DURA-GREEN™, Pre-Galv,
l
l
B3322
e
End Cap
r
HDG B205 End Cap B22-I-12 THRU B22-I-
Length Wt./C Design Load
Part No. in. mm Lbs. kg Lbs. kN

B22-I-3 3” (76) 72 (32.6) 500 (2.22)

B22-I-4 4” (101) 88 (39.9) 800 (3.56)
B22-I-6 6” (152) 120 (54.4) 1000 (4.45)
B22-I-8 8” (203) 152 (68.9) 1200 (5.34)
Concrete Inserts

Length Wt./C
Part No. in. mm Lbs. kg

B22-I-12 12” (305) 224 (101.6)

B22-I-16 16” (406) 289 (131.1)
B22-I-20 20” (508) 353 (160.1)
B22-I-24 24” (609) 420 (190.5)
B22-I-32 32” (813) 553 (250.8)
B22-I-36 36” (914) 620 (281.2)
B22-I-40 40” (1016) 686 (311.1)
B22-I-48 48” (1219) 820 (371.9)
B22-I-60 60” (1524) 1018 (461.7)
B22-I-72 72” (1829) 1218 (552.5)
B22-I-84 84” (2133) 1417 (642.7)
B22-I-96 96” (2438) 1616 (733.0)
B22-I-108 108” (2743) 1816 (823.7)
B22-I-120 120” (3048) 2016 (914.4)
B22-I-144 144” (3657) 2416 (1095.9)
B22-I-168 168” (4267) 2816 (1277.3)
B22-I-192 192” (4877) 3216 (1458.7)
B22-I-216 216” (5486) 3616 (1640.2)
B22-I-240 240” (6096) 4016 (1821.6)
Reference page 212 for general fitting and standard finish specifications
214
 15/8”
(41.3)
3
/4” (19.0)
.188 Knockouts For Nailing Inserts To
Forms

B22-I-12 THRU B22-I-240

Strut Systems
 Continuous Concrete Inserts
B32I
CONTINUOUS CONCRETE INSERT MATERIAL: 12 Gauge (2.6) 4
• Design Load for B32-I-12 thru B32-I-240 is 2,000 27/8” ”
lbs. (8.89 kN) per foot of concrete insert length (73.0) (
with safety factor of 3 in 3000 psi concrete. B32-I-3 THRU B32-I-8 1
• Loads concentrated within the last 2 inches 25/8” 0
(50.8 mm) of concrete inserts 8” (203.2 mm) and (66.7) 1
15/8” .
longer should not exceed 1,000 lbs. (4.45kN).
6
• Concrete insert should be secured to the forms )
on 16” (406.4 mm) to 24” (609.6 mm) intervals.
1
• B32-I continuous concrete inserts are made 1 1
from B32 channel. Use channel nuts designed for 3
/
use in B32 channel. / 2
• B32-I concrete inserts are supplied with 8 ”
styrofoam fillers. B3332 end caps are furnished ” (
with inserts through 8” (203.2 mm) long, and B206 ( 3
end caps are furnished 3 8
4 .
. 1
9 )
) 1

1
with inserts 12” (304.8 mm) and longer. 1 / 8”
3 (41.3)
• Material: Plain Steel ASTM A1011 33,000 PSI (34.9) /
min. yield or Pre-Galvanized Steel ASTM Styrofoam Filler 1
A653SS 33,000 PSI min. yield. B3332
• Finish: Plain, DURA-GREEN™, Pre-Galv, HDG End Cap

B206 End Cap

B32-I-12 THRU B32-I-240
Length Wt./C Design Load
Part No. in. mm Lbs. kg Lbs. kN

B32-I-3 3” (76) 65 (29.5) 500 (2.22)

B32-I-4 4” (101) 80 (36.3) 800 (3.56)
B32-I-6 6” (152) 108 (49.0) 1000 (4.45)
B32-I-8 8” (203) 137 (62.1) 1200 (5.34)
Concrete Inserts

Length Wt./C
Part No. in. mm Lbs. kg

B32-I-12 12” (305) 202 (91.6)

B32-I-16 16” (406) 262 (118.8)
B32-I-20 20” (508) 316 (143.3)
B32-I-24 24” (609) 376 (170.5)
B32-I-32 32” (813) 496 (225.0)
B32-I-36 36” (914) 556 (252.2)
B32-I-40 40” (1016) 616 (279.4)
B32-I-48 48” (1219) 736 (333.8)
B32-I-60 60” (1524) 915 (415.0)
B32-I-72 72” (1829) 1095 (496.7)
B32-I-84 84” (2133) 1274 (577.9)
B32-I-96 96” (2438) 1453 (659.0)
B32-I-108 108” (2743) 1633 (740.7)
B32-I-120 120” (3048) 1813 (822.3)
B32-I-144 144” (3657) 2173 (985.6)
B32-I-168 168” (4267) 2533 (1148.9)
B32-I-192 192” (4877) 2893 (1312.2)
B32-I-216 216” (5486) 3253 (1475.5)
B32-I-240 240” (6096) 3613 (1638.8)
Reference page 212 for general fitting and standard finish specifica
Strut Systems 215
ncrete Inserts
3
/4” (19.0) 15/8”
.188 Knockouts For (41.3)
Nailing Inserts To
Forms
Styrofoam Filler

nd Cap
12 THRU B32-I-240
nd standard finish specifications.
 B52I MATERIAL: 12 Gauge (2.6) 4
CONTINUOUS CONCRETE INSERT 25/16” ”
(58.7) (
• Design Load for B52-I-12 thru B52-I-240 is
1,500 lbs. (6.67 kN) per foot of concrete insert B52-I-3 THRU B52-I-8 1
length with safety factor of 3 in 3000 psi 29/16” 0
(65.1) 1
concrete. .
• Loads concentrated within the last 2 inches 15/8” 1
6
/16” (41.3)
13
(50.8 mm) of concrete inserts 8” (203.2 mm) and 3
)
longer should not exceed 750 lbs. (3.33kN). (20.6) / 1
• Concrete insert should be secured to the forms 1 1

on 16” (406.4 mm) to 24” (609.6 mm) intervals. 6 /

• B52-I continuous concrete inserts are made ” 2
from B52 channel. Use channel nuts designed for ”
use in B52 channel. ( (
• B52-I concrete inserts are supplied with 2 3
styrofoam fillers. B3352 end caps are furnished 0 8
with inserts through 8” (203.2 mm) long, and B220 . .
6 1
end caps are furnished with inserts 12” (304.8
) )
mm) and longer. 1
• Material: Plain Steel ASTM A1011 33,000 PSI 1

min. yield or Pre-Galvanized /

1
6
”
Steel ASTM A653SS 33,000 PSI min. B3352 Styrofoam B220 End Cap
yield. End Cap Filler B52-I-12 THRU B52-I-240
• Finish: Plain, DURA-GREEN , Pre-Galv, HDG
™

Length Wt./C Design Load

Part No. in. mm Lbs. kg Lbs. kN

B52-I-3 3” (76) 53 (24.0) 400 (1.78)

B52-I-4 4” (101) 63 (28.6) 500 (2.22)
B52-I-6 6” (152) 85 (38.5) 750 (3.33)
B52-I-8 8” (203) 106 (48.1) 1000 (4.45)
Concrete Inserts

Length Wt./C
Part No. in. mm Lbs. kg

B52-I-12 12” (305) 157 (71.2)

B52-I-16 16” (406) 202 (91.6)
B52-I-20 20” (508) 237 (107.5)
B52-I-24 24” (609) 282 (127.9)
B52-I-32 32” (813) 373 (169.2)
B52-I-36 36” (914) 419 (190.0)
B52-I-40 40” (1016) 464 (210.4)
B52-I-48 48” (1219) 556 (252.2)
B52-I-60 60” (1524) 692 (313.9)
B52-I-72 72” (1829) 829 376.0
B52-I-84 84” (2133) 965 (437.7)
B52-I-96 96” (2438) 1107 (502.1)
B52-I-108 108” (2743) 1237 (561.1)
B52-I-120 120” (3048) 1374 (623.2)
B52-I-144 144” (3657) 1648 (747.5)
B52-I-168 168” (4267) 1922 (871.8)
B52-I-192 192” (4877) 2196 (996.1)
B52-I-216 216” (5486) 2470 (1120.4)
B52-I-240 240” (6096) 2744 (1244.6)
Reference page 212 for general fitting and standard finish specifications
216
 3
/4” (19.0) 1
.188 Knockouts For 5

Nailing Inserts To /
Forms 8
Styrofoam Filler
”
(
4
1
.
3
)

U B52-I-240
Strut Systems
B2500 N2500 1
1 /4”
SPOT INSERT INSERT SQUARE NUT
(31.7)
• Design Load 600 Lbs. (2.67 kN) • For use in B2500 Spot Insert
• Safety Factor of 5 • Material: Steel ASTM A36 5
/16”
• Order N2500 Nuts Separately • Standard finish: ZN
11/4” (7.9)
• Material: Steel ASTM A1011 33,000 PSI min. yield (31.7)
Thread Size
• Standard finish: ZN
• Wt./C 46 Lbs. (20.8 kg) 2”
(50.8)
31/4”
(82.5)
Material:
12 Gauge (2.6)
11/2” 19/16”

(38.1) (65.0)

B2503 B2505 THRU B2508 Channel End Caps

HEAVY DUTY SPOT INSERT SPOT INSERT Size

• Designed for use where heavy loads are • Safety Factor of 5

required in curtain wall applications • To support 10” (250) pipe use B2505 25/8”
• Design Load is 5000 Lbs. (22.2 kN) with a Safety insert with 5/8”-11 Channel Nuts. (66.7)
Factor of 3 • To support up to and including 8”
• Loading based on two N225 channel nuts (200) pipes use B2506, B2507 and 51/16”

spaced 3” (76.2 mm) on center and a minimum of B2508 inserts with the desired (128.6)

2” (50.8 mm) from the end Channel Nuts.

of the insert • Standard finish: ZN
• Styrofoam end caps prevent concrete seepage
into the channel
• 12” (304.8 mm) long insert is anchored into the
concrete at a depth of Channel End Cap Design Load Maximum
Part No. Style Part No. Lbs. kN Pipe Size
51/2” (139.7 mm)
• Material: 12 Gauge (2.6 mm) thick steel B2505 (5.34) (250)
B22 B3322 1200 10”
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg) B2506 B32 B3332 1000 (4.45) 8” (200)
5 / 2”
1 B2507 B42 B3342 1000 (4.45) 8” (200)
(139.7) B2508 B52 B3352 1000 (4.45) 8” (200)
15/8”
2” (41.3)
/32” (4.0)
5 (50.8)

15/8”
DIA. NAIL
HOLES (41.3)
8”
(203.2)
12”
(304.8)
Styrofoam End Caps
• Material: 12 Gauge (2.6 mm) thick steel
• Standard finish: ZN
• Wt./C 42 Lbs. (19.0 kg)
51/2”
(139.7)
15/8”
2” (41.3) B2501
/32” (4.0)
5 (50.8)
LIGHT DUTY SPOT INSERT
15/8”
DIA. NAIL • Safety Factor of 2
HOLES (41.3) • The concrete attachment problem solver for light
8” duty applications.
(203.2) • Fast and easy applications. A
12” • No concrete leakage problems.
(304.8)
Styrofoam End Caps • One piece unitized construction.
• Color coded cap on thread for rod size identification
and to prevent concrete seepage. (1/4”-Yellow, 3/8”-Red, H
1
/2”-Blue) 11/4”
(31.7)
Design Load

Part No. & Height A Height H Design Load

Size Lbs. kN
B2501-1/4 27/16” (61.9) / ” (22.2)
7 8
250 (1.11)
B2501-3/8 31/16” (77.8) 17/8” (47.6) 610 (2.71)
B2501-1/2 41/8” (104.8) 17/8” (47.6) 880 (3.91)

Thread Wt./C
Part No. Size Lbs. kg

N2500- /4 1 1
/4”-20 13 (5.9)
N2500-5/16 5
/16”-18 13 (5.9)
N2500-3/8 3
/8”-16 12 (5.4)
N2500-1/2 1
/2-13 12 (5.4)
N2500-5/8 5
/8”-11 11 (5.0)
N2500-3/4 3
/4”-10 10 (4.5)
N2500-7/8 7
/8”-9 9 (4.1)
Concrete Inserts

Reference page 212 for general fitting and standard finish specifica
Strut Systems 217
 5
/16”

51/16”
(128.6)

Maximum Wt./C
Pipe Size Lbs. kg

(250) 96 (43.5)
(200) 88 (39.9)
(200) 77 (34.9)
(200) 69 (31.3)
 H
11/4”
(31.7)
Design Load

Wt./C
Lbs. kN
16 (7.2)
22 (9.9)
26 (11.7)

standard finish specifications.

 B205, B206, B220 B3322, B3332, B3342, B3352
X TYPE END CAPS Y TYPE END CAPS
• UL listed for raceway use only • UL listed for raceway use only
• Material: 12 Gauge (2.6) • Material: 14 Gauge (1.9)
• Standard finish: ZN • Standard finish: ZN
A 3
/8” (9.5)
DIA. 5
2 /8”
(66.7)
A
113/16” 1”

(46.0) (25.4)

B380 13/4” B22IFS-B52IFS

JOINT SPLICE PLATE (44.1) STYROFOAM FILLER STRIP
• Used at splice points to prevent 29
/32” (23.0)
concrete seepage in long continuous runs of concrete A B
inserts. A
• Material: 18 Gauge (1.2) 1/16”
5
1 /8”
• Standard finish: GALV (1.6) (41.3)

Use Wt./C
Part No. With A Lbs. kg A
Part No. Ft. mm B
B380-22 B22 15/8” (41.3) 11 (5.0)
B380-32 B32 13/8” (34.9) 10 (4.5) B22-IFS 4’ (1219) 17/32” (309)
B380-42 B42 1” (25.4) 9 (4.1) B32-IFS 4’ (1219) 1” (254)
B380-52 B52 / ”
13 16 (20.6) 7 (3.2) B52-IFS 4’ (1219) / ”
21 32 (167)

Use Wt./C
Part No. With A Lbs. kg

B3322 B22 1.270 (32.2) 15 (6.8)

B3332 B32 1.000 (25.4) 15 (6.8)
B3342 B42 0.645 (16.4) 15 (6.8)
B3352 B52 0.460 (11.7) 15 (6.8)
Use Wt./C
Part No. With A Lbs. kg

B205 B22 121/32” (42.0) 10 (4.5)

B206 B32 113/32” (35.7) 8 (3.6)
B220 B52 / ”
27 32 (21.4) 4 (1.8)
Concrete Inserts

PIPE SLEEVE FASTENERS

• Allows for rigid attachment
of pipe sleeves to wall and floor forms for concrete
pouring.
• Accommodates Schedule 40, Schedule 80, or 5/16"
(8) and smaller wall thickness.
• Simply installed with a hammer.

BD40
BE-5-8 & BE-9-12
Sleeve Wall Thickness
Part No. Diameter
BD40 All Dia. / ” & under
5 16

BE-5-8 6” Schedule 80 pipe

BE-9-12 9” - 14” Schedule 80 pipe
Reference page 212 for general fitting and standard finish specifications
218
52

B52IFS
ILLER STRIP
23.0)

Wt./C
Lbs. kg

10 (4.5)
9 (4.1)
7 (3.2)
-5-8 & BE-9-12

Strut Systems
 WEDGE ANCHOR
Catalog Thread Thread Drill/Hole Load Cap. Load Cap.
Number Size Size Length Size Tension* Shear*
in. mm in. mm in. mm lbs. kN lbs. kN

AWA-37-225 /8"-16
3 3
/8" x 21/4" (9 x 57) 11/4" (32)
AWA-37-275 /8"-16
3 3
/8" x 23/4" (9 x 70) 15/8" (41)
AWA-37-300 3
/8"-16 3
/8" x 3" (9 x 76) 17/8" (47) 3
/8” (9) 760 (3.38) 940 (4.18)
AWA-37-350 3
/8"-16 3
/8" x 31/2" (9 x 89) 23/8" (60)
AWA-37-375 3
/8"-16 3
/8" x 33/4" (9 x 95) 25/8" (66)
AWA-37-500 3
/8"-16 3
/8" x 5" (9 x 127) 37/8" (98)
AWA-50-275 1
/2"-13 1
/2" x 2 /4" (13 x 70)
3
13/8" (35)
AWA-50-375 1
/2"-13 1
/2" x 33/4" (13 x 95) 23/8" (60)
AWA-50-450 1
/2"-13 1
/2" x 41/2" (13 x 114) 31/8" (79) 1/2” (13) 1390 (6.18) 1700 (7.56)
AWA-50-550 1
/2"-13 1
/2" x 51/2" (13 x 140) 41/8" (105)
AWA-50-700 1
/2"-13 1
/2" x 7" (13 x 178) 55/8" (143)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
HOLLOW BASE DROP-IN ANCHORS

Catalog Rod Overall Sleeve Drill/Hole Load Cap. Load Cap.

Number Size Length Length Diameter Tension* Shear*
in. mm in. mm in. mm lbs. kN lbs. kN
ADH-25 1
/4”-20 7
/8” (22) 5
/8” (16) 3
/8” (9) 285 (1.27) 300 (1.33)
ADH-37 3
/8”-16 15/16” (33) 15
/16” (24) 5
/8” (16) 520 (2.31) 640 (2.84)
ADH-50 1
/2”-13 13/4” (44) 11/4” (32) 3
/4” (19) 1005 (4.47) 1005 (44.70)
9323 1
/4” -- -- -- -- -- -- -- -- -- --
9343 3
/8” -- -- -- -- -- -- -- -- -- --
9353 1
/2” -- -- -- -- -- -- -- -- -- --
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
RAPID ROD™ HANGERS FOR CONCRETE
Concrete Inserts

Catalog Rod Size Shank Size Drill/Hole Load Cap. Load Cap.
Number & Length Size Tension* Lbs. Shear*
in. mm in. mm kN Lbs. kN

ARC-25-125 /4”-20
1 1
/4” x 11/4” (6 x 32) 1
/4” (6) 485 (2.16) 610 (2.71)
ARC-37-150 /8”-16
3 1
/4” x 11/2” (6 x 38) 1
/4” (6) 650 (2.89) 660 (2.93)
ARC-50-275 /2”-13
1 3
/8” x 23/4” (9 x 70) 1
/4” (6) 1510 (6.71) 1580 (7.03)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
RAPID ROD™ HANGERS FOR STEEL
 Catalog Rod Size Shank Size & Load Cap. Load Cap.
Number Length Tension* In 12 Ga. Tension* In 1/4”
in. mm Lbs. kN Lbs. kN

ARS-25-100 1
/4”-20 /4” x 1”
1 (6 x 25) 390 (1.75) 1260 (5.60)
ARS-37-100HN 3
/8”-16 1
/4” x 1” * (6 x 25) 512 (2.28) 1260 (5.60)
ARS-37-150 3
/8”-16 1
/4” x 11/2” (6 x 38) 390 (1.75) 1260 (5.60)
ARS-37-150HN 3
/8”-16 /4” x 11/2” (6 x 38)
1
512 (2.28) 1260 (5.60)
ARS-37-200 3
/8”-16 1
/4” x 2” (6 x 51) 390 (1.75) 1260 (5.60)

Note: Loads shown for ASTM A36 beams and ASTM A572 steel purlins include a safety factor of 4.
For UL and FM listings, steel rapid rod must be installed with a retaining nut.
Reference page 212 for general fitting and standard finish specificat
Strut Systems 219
or of 4.

or of 4.

or of 4.
y factor of 4.

nd standard finish specifications.

 PLASTIC SCREW ANCHORS
• Kits contain 100 anchors, 100 screws, and 1 concrete drill bit
Catalog Number Screw Size Load Cap. Load Cap. Shear*
Tension* Lbs. kN
Lbs. kN

APC-8K #8 x 1” 110 (0.49) 70 (0.31)

APC-10K #10 x 1” 140 (0.62) 90 (0.40)
APC-12K #12 x 1” 140 (0.62) 90 (0.40)
Note: Based on concrete compression strength of 4,000 psi using applied safe

WOOD-KNOCKER™ ANCHORS †

Catalog Rod Insert Thread Overall Load Cap. Load Cap.

Number Size Color Length Length Tension* Shear*
in. mm in. mm lbs. kN lbs. kN

ACPW-25 1
/4”-20 Brown 3
/8” (9) 17/8” (47) 930 (4.13) 370 (1.64)
ACPW-37 3
/8”-16 Green 5
/8” (16) 17/8” (47) 1200 (5.33) 1330 (5.91)
ACPW-50 1
/2”-13 Yellow 11
/16” (17) 17/8” (47) 1200 (5.33) 1840 (8.18)
ACPW-62 5
/8”-11 Red 15
/16” (24) 17/8” (47) 1160 (5.16) 2800 (12.45)
ACPW-75 3
/4”-10 Purple 11/8” (28) 17/8” (47) 1160 (5.16) 2800 (12.45)
Notes: Based on normal weight concrete with minimum compression strength of 3,000 ps
Allowable load capacities are calculated using applied safety factor of 4. Minimum embed
† Wood-Knocker™ is a trademark of Powers® Fasteners

BANG-IT™ ANCHORS †
Concrete Inserts

Catalog Rod Insert Thread Upper Deck Lower Deck Upper Deck Lower Deck
Number Size Color Length Tension Load* Tension Load* Shear Load* Shear Load*
in. mm lbs. kN lbs. kN lbs. kN lbs. kN
ACPD-25 1
/4”-20 Brown /8”
3 (9) 1112 (4.94) 830 (3.69) 625 (2.78) 625 (2.78)
ACPD-37 3
/8”-16 Green 5/8” (16) 1435 (6.38) 830 (3.69) 837 (3.72) 837 (3.72)
ACPD-50 1
/2”-13 Yellow 11/16” (17) 1775 (7.89) 830 (3.69) 837 (3.72) 837 (3.72)
ACPD-62 5
/8”-11 Red 15
/16” (24) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
ACPD-75 3
/4”-10 Purple 11/8” (28) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
ACPD-87 7
/8”-9 Black 15/16” (33) 2200 (9.78) 990 (4.40) 837 (3.72) 837 (3.72)
Notes: Based on normal weight concrete with minimum compression strength of 3,000 ps
Allowable load capacities are calculated using applied safety factor of 4. Minimum insert s
minimun end spacing of 12” (305mm). Minimum embedment is 2” (51mm).
Length of sleeve is 33/8” (86mm.
† Bang-It™ is a trademark of Powers® Fasteners

Reference page 212 for general fitting and standard finish specifications
220
 concrete drill bit

ngth of 4,000 psi using applied safety factor of 4.

m compression strength of 3,000 psi.

safety factor of 4. Minimum embedment is 2” (51mm).

m compression strength of 3,000 psi.

safety factor of 4. Minimum insert spacing of 12” (305mm),
ment is 2” (51mm).

cations
Strut Systems
 1
/4” CONCRETE SCREWS
Catalog Rod Size Drill/Hole Load Cap. Load Cap.
Number in. mm Size Tension* Shear*
in. mm lbs. kN lbs. kN

ACS-125H 1
/4” x 11/4” (6 x 32) 3
/16” (5) 265 (1.18) 205 (0.91)
ACS-175H 1
/4” x 13/4” (6 x 44) 3
/16” (5) 265 (1.18) 205 (0.91)
ACS-225H 1
/4” x 21/4” (6 x 57) 3
/16” (5) 265 (1.18) 205 (0.91)
ACS-275H 1
/4” x 23/4” (6 x 70) 3
/16” (5) 265 (1.18) 205 (0.91)
ACS-325H 1
/4” x 31/4” (6 x 82) 3
/16” (5) 265 (1.18) 205 (0.91)
Note: Based on 1” (25mm) embedment with concrete compression strength of 4,000 psi using applied safety fac
Consult factory for loading of other embedment depths.
SELF-TAPPING MACHINE SCREW ANCHOR
Catalog Rod Size Thread Depth Drill/Hole Load Cap. Load Cap.
Number in. mm Size Tension* Lbs. Shear*
in. mm kN Lbs. kN

ATM-37 /8”-16
3
/16”
11 (17) /2”
1 (13) 540 (2.40) 825 (3.67)

Note: Based on concrete compression strength of 4,000 psi in uncracked concrete using applied safety factor o
Minimum concrete thickness 4” (101mm) with minimum embedment of 15/8” (41mm)
WALL SCREWS
Catalog Head Thread Depth Minimum Load Cap. Load Cap.
Number Type in. mm Embedment in. Tension* Lbs. Shear*
mm kN Lbs. kN

AWS-CH Combo /16” x 11/4”

3 (5 x 32) 3
/4” (19) 90 (0.40) 260 (1.15)
AWS-OH Oval /16” x 11/4”
3 (5 x 32) 3
/4” (19) 90 (0.40) 260 (1.15)
AWS-PH Pan /16” x 11/4”
3 (5 x 32) 3
/4” (19) 90 (0.40) 260 (1.15)
Concrete Inserts

Note: Based on concrete compression strength of 4,000 psi. Allowable load capacities are calculated using an a

SLEEVE TYPE EXPANSION ANCHORS

Catalog Anchor Size & Thread Drill/Hole Minimum Load Cap. Load Cap.
Number Length Length Diameter Embedment Tension* Shear*
in. mm in. mm in. mm in. mm lbs. kN lbs. kN

ASA-37-187HN 3
/8” x 17/8” (9 x 47) 15/8” (41) 3
/8” (9) 15/8” (41) 670 (2.98) 610 (2.71)
ASA-37-300HN 3
/8” x 3” (9 x 76) 15/8” (41) 3
/8” (9) 15/8” (41) 670 (2.98) 610 (2.71)
ASA-37-400HN 3
/8” x 4” (9 x 101) 15/8” (41) 3
/8” (9) 15/8” (41) 670 (2.98) 610 (2.71)
ASA-50-225HN 1
/2” x 21/4” (13 x 57) 21/4” (57) 1
/2” (13) 21/4” (57) 1255 (5.58) 1055 (4.69)
ASA-50-300HN 1
/2” x 3” (13 x 76) 21/4” (57) 1
/2” (13) 21/4” (57) 1255 (5.58) 1055 (4.69)
ASA-50-400HN 1
/2” x 4” (13 x 101) 21/4” (57) 1
/2” (13) 21/4” (57) 1255 (5.58) 1055 (4.69)
ASA-50-525HN 1
/2” x 51/4” (13 x 133) 21/4” (57) 1
/2” (13) 21/4” (57) 1255 (5.58) 1055 (4.69)
ASA-50-600HN 1
/2” x 6” (13 x 152) 21/4” (57) 1
/2” (13) 21/4” (57) 1255 (5.58) 1055 (4.69)
Note: Based on concrete compression strength of 4,000 psi using applied safety factor of 4.
 Reference page 212 for general fitting and standard finish specifica
Strut Systems 221
si using applied safety factor of 4.

ng applied safety factor of 4.

are calculated using an applied safety factor of 4.

or of 4.
d standard finish specifications.
 Our Slotted Angle is an all-purpose framing system, roll formed from high strength steel strips. It is de
economical shelving, racks or electrical and mechanical supports. The unique pattern of horizontal an
flexibility. Three basic sizes are available for light, medium, and heavy duty applications.
Materials & Finishes*

Finish
Code Finish Specification

PLN Plain ASTM A1011

33,000 PSI min. yield
ZN Electro-Plated Zinc ASTM B633 SC3
GRN DURA-GREEN™
GALV Pre-Galvanized ASTM A653
33,000 PSI min. yield
*Unless otherwise noted.
Lengths
Standard lengths are 10’ (3.05 m) and 12’ (3.66 m). Slotted Angle is shipped in ten piece bundles comp
3
/4” (19mm) hex head cap screws and 3/8” hex nuts.
Metric
Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.
Slotted Angle

222
strength steel strips. It is designed to be used as
que pattern of horizontal and vertical slots permits full
ty applications.

d in ten piece bundles complete with 75 pieces of 3/8” x

ensions are in millimeters.

Strut Systems
 SA158
1
3

• 14 Gauge (1.9) /
1
3
• 15/8” x 15/8” 3 7
• Standard finishes: ZN, GRN 2
• Wt./Ft. .66 Lbs. (.98 kg/m) ” /
6
( 137/64 4
1 ” ”
0 (40.1) (
. 4
SA276 13/32” (10.3) x 9/3 16” 0
(14.3) ) .
• 14 Gauge (1.9)
Transverse Slots 1
• 15/8” x 23/8” x
13/323”/4(10.3)
” x 9/16” )
• Standard finishes: ZN, (19.0)
(14.3)
GRN 9

Longitudinal Slots10’ (3.05 m)

• Wt./Ft. .78 Lbs. (1.17
12’ (3.66 m)
kg/m) 137/64
”
1)
40

3
/ 4” (19.0) 11/2”
(38.1)
3
/ 4” 10’ (3.05 m)
(19.0)

12’ (3.66 m)

SA318 13
/32” (10.3) x 9/16” (14.3)
25/16 Transverse Slots
• 12 Gauge (2.6)
• 15/8” x 31/8” ” 13
/32” (10.3) x 9/16” (14.3)
(58.7) Longitudinal Slots
• Standard finishes: ZN, GRN
• Wt./Ft. 1.32 Lbs. (1.96 kg/m)

137/6
4”
3 (40.1
/ 4”
3
(19.0) )
/
4
” 11/2”
Slotted Angle

12’ (3.66 m)

Reference page 222 for general fitting and standard finish specifica
Strut Systems 223

(19.0) (38.1) 13/32”(10.3) Hol

10’ (3.05 On 3” (76.2)
m) Centers
(19.0) (38.1) 13/32”(10.3) Hol
10’ (3.05 On 3” (76.2)
m) Centers

33/32
”
(78.6)
 11/2”
(38.1)
10’ (3.05 m)

2” (10.3) x 9/16” (14.3)

Transverse Slots
2” (10.3) x 9/16” (14.3)
Longitudinal Slots

standard finish specifications.

13/32”(10.3) Holes
On 3” (76.2)
Centers
 13/32”(10.3) Holes
On 3” (76.2)
Centers

33/32
”
(78.6)
 BEAM SECTIONS
Single Piece (Up) Single Piece (Level) Single Piece (Down) Single Piece with Stiffener

Z-Section Broad Channel Broad Channel with Stiffener

T-Section T-Section with Stiffener J-Section I-Secti

For greater strength required in some applications, Slotted Angle may be fastened together to create combinatio
A number of these combinations are illustrated above. Refer to the following table for load capacities of these co
Beam Sections illustrated are single sections, except J, N, and P.
BEAM LOADING
SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9)
Beam Span
24” (609 mm) 36” (914 mm) 48” (1219 mm) 60” (1524 mm) 72” (1829 mm) 84” (2133 mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN

A 825 (3.67) 525 (2.33) 340 (1.51) 230 (1.02) 180 (0.80) – –
B 1100 (4.89) 800 (3.56) 540 (2.40) 370 (1.64) 250 (1.11) – –

C 1100 (4.89) 800 (3.56) 540 (2.40) 370 (1.64) 250 (1.11) – –
D 1300 (5.78) 900 (4.00) 625 (2.78) 450 (2.00) 330 (1.47) 275 (1.22)

G 1900 (8.45) 1360 (6.05) 1050 (4.67) 825 (3.67) 660 (2.93) 530 (2.36)

H 2300 (10.23) 1850 (8.23) 1450 (6.45) 1100 (4.89) 950 (4.22) 800 (3.56)

I 2200 (9.78) 1650 (7.34) 1225 (5.45) 930 (4.14) 700 (3.11) 550 (2.44)
Slotted Angle

Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity
uniform load by 0.5.
Reference page 222 for general fitting and standard finish specifications.
224

C
 C

I
J

K
gle Piece with Stiffener Narrow Channel

Z-Section with Stiffener

on I-Section

gether to create combination shapes.

load capacities of these combinations.

96” (2438 mm)

Lbs. kN

– –
– –

– –
200 (089)

400 (1.78)

700 (3.11)

450 (2.00)

concentrated load capacity at mid-span, multiply

Strut Systems
 E

H
L
 BEAM LOADING
SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9)
Beam Span
24” (609 mm) 36” (914 48” (1219 60” (1524 72” (1829 84” (2133 96” (2438 108” (2743
Lbs. kN mm) mm) mm) mm) mm) mm) mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN
A – – 680 (3.02) 450 (2.00) 340 (1.51) – – – – – – –
B – – 830 (3.69) 550 (2.44) 360 (1.60) 210 (0.93) 150 (0.67) – – –

C – – 1540 (6.85) 1060 (4.71) 800 (3.56) 610 (2.71) 480 (2.13) 340 (1.51) 250
D – – 1880 (8.36) 1280 (5.69) 970 (4.31) 820 (3.65) 650 (2.89) 550 (2.44) 420
E – – 2110 (9.38) 1730 (7.69) 1460 (5.77) 1250 (5.56) 1090 (4.85) 920 (4.09) 820
F 4290 (19.08) 2510 (11.16) 1790 (7.96) 1330 (5.91) 980 (4.36) 710 (3.16) 550 (2.44) 420
G 4320 (19.21) 3000 (13.34) 2140 (9.52) 1600 (7.12) 1290 (5.74) 1040 (4.62) 820 (3.65) 640
H – – 3480 (15.48) 2430 (10.81) 1890 (8.41) 1620 (7.20) 1430 (6.36) 1270 (5.65) 1160
I 5780 (25.71) 3640 (16.19) 2820 (12.54) 2200 (9.78) 1700 (7.56) 1350 (6.00) 1060 (4.71) 850
J – – 3660 (16.28) 2840 (12.63) 2230 (9.92) 1720 (7.65) 1360 (6.05) 1090 (4.85) 874
K – – 4910 (21.84) 3830 (17.03) 3000 (13.34) 2550 (11.34) 2190 (9.74) 1880 (8.36) 1640
L – – 6360 (28.29) 4590 (20.42) 3470 (15.43) 2910 (12.94) 2550 (11.34) 2240 (9.96) 2010
Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity
load by 0.5.
BEAM LOADING
SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6)
Beam Span
24” (609 mm) 36” (914 48” (1219 60” (1524 72” (1829 84” (2133 96” (2438 108” (2743
Lbs. kN mm) mm) mm) mm) mm) mm) mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN
A – – 1140 (5.07) 850 (3.78) 690 (3.07) – – – – – – –
B – – 1250 (5.56) 850 (3.78) 600 (2.67) 400 (1.78) – – – – –

C 4800 (21.35) 2750 (12.23) 1800 (8.01) 1280 (5.69) 1000 (4.45) 790 (3.51) 610 (2.71) –
D – – 3900 (17.35) 2690 (11.96) 2050 (9.12) 1700 (7.56) 1480 (6.58) 1280 (5.69) 1100
E – – 4160 (18.50) 3560 (15.83) 3130 (13.92) 2750 (12.23) 2400 (10.67) 2170 (9.65) 1950
F 8180 (36.38) 5000 (22.24) 3650 (16.23) 2750 (12.23) 2200 (9.78) 1750 (7.78) 1350 (6.00) 1020
G 10600 (47.15) 6050 (26.91) 4440 (19.75) 3330 (14.81) 2670 (11.88) 2120 (9.43) 1660 (7.38) 1210
H – – 6100 (27.13) 4620 (20.55) 3670 (16.32) 3110 (13.83) 2680 (11.92) 2380 (10.59) 2100
I 13700 (60.94) 7800 (34.69) 5900 (26.24) 4600 (20.46) 3800 (16.90) 3190 (14.19) 2630 (11.70) 2170
J – – 7900 (35.14) 6300 (28.02) 5050 (22.46) 4070 (18.10) 3240 (14.41) 2630 (11.70) 2170
K – – 10050 (44.70) 8000 (35.58) 6320 (28.11) 5350 (23.80) 4650 (20.68) 4040 (17.97) 3520
L – – 12700 (56.49) 9550 (42.48) 7540 (33.54) 6540 (29.09) 5730 (25.49) 5030 (22.37) 4520
Slotted Angle

Based on simple beam condition with uniform loads on parallel beams. To determine concentrated load capacity
load by 0.5.
Reference page 222 for general fitting and standard finish specifica
Strut Systems 225
 108” (2743 120” (3048
mm) mm)
Lbs. kN Lbs. kN
– – –
– – –
(1.11) – –
(1.87) 340 (1.51)

(3.65) 680 (3.02)

(1.87) 320 (1.42)

(2.85) 490 (2.18)

(5.16) 1030 (4.58)

(3.78) 680 (3.02)

(3.89) 700 (3.11)

(7.29) 1430 (6.36)

(8.94) 1840 (8.18)
ne concentrated load capacity at mid-span, multiply uniform

108” (2743 120” (3048

mm) mm)
Lbs. kN Lbs. kN
– – –
– – –

– – –
(4.89) 960 (4.27)
(8.67) 1780 (7.92)
(4.54) 700 (3.11)
(5.38) 1000 (4.45)
(9.34) 1950 (8.67)
(9.65) 1810 (8.05)
(9.65) 1810 (8.05)
(15.66) 3120 (13.88)

(20.10) 4000 (17.79)

ne concentrated load capacity at mid-span, multiply uniform

ng and standard finish specifications.

25
 COLUMN SECTIONS
M N N N O O
Single Piece T-Section Broad Channel Section Narrow Channel Uneven T-Section
Section
P P P Q R
Dual Channel Section T-Channel Section T-Channel Section I-Section Uneven I-Se

For greater strength required in some applications, Slotted Angle may be fastened together to create combinatio
A number of these combinations are illustrated above. Refer to the following table for load capacities of these co
COLUMN LOADING - SA158-15/8” (41.3) x 15/8” (41.3) x 14 Gauge (1.9)
Column Height
36 (914 mm)
”
48 (1219 mm)
”
60” (1524 mm) 72” (1829 mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN
M 1450 (6.45) 1150 (5.11) 950 (4.22) 750 (3.33)
N 3850 (17.12) 3500 (15.57) 3000 (13.34) 2500 (11.12)
Column Loads assume no lateral support.
COLUMN LOADING - SA276-15/8” (41.3) x 23/8” (60.3) x 14 Gauge (1.9)
Column Height
36
” (914 mm) 48
” (1219 mm) 60
” (1524 mm) 72
” (1829 mm)
”
84 (2133 mm) 96
” (2438 mm) 108
” (2743 mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN

M 2280 (10.14) 1970 (8.76) 1520 (6.76) 1070 (4.760) 660 (2.93) – – – –
N 4760 (21.17) 4490 (19.97) 3995 (17.77) 3140 (13.97) 2340 (10.41) 1750 (7.78) – –
O 4940 (21.97) 4680 (20.82) 4310 (19.17) 3870 (17.21) 3665 (16.30) 2700 (12.01) 2060 (9.16)
P 7270 (32.34) 6920 (30.78) 6370 (28.33) 5840 (25.98) 4930 (21.93) 3850 (17.12) 2870 (12.76)
Q 9520 (42.35) 8970 (39.90) 7990 (35.54) 6280 (27.93) 4660 (20.73) 3500 (15.57) – –
R 9865 (43.88) 9330 (41.50) 8620 (38.34) 7715 (34.32) 6740 (29.98) 5365 (23.86) 4115 (18.30)
Column Loads assume no lateral support.
COLUMN LOADING - SA318-15/8” (41.3) x 31/8” (79.4) x 12 Gauge (2.6)
Slotted Angle

Column Height
36
” (914 mm) 48
” (1219 mm) 60
” (1524 mm) 72
” (1829 mm) ”
84 (2133 mm) 96
” (2438 mm) 108
” (2743 mm)
Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN

M 3470 (15.43) 2870 (12.76) 1970 (8.76) 1280 (5.69) – – – – – –

N 7970 (35.45) 7360 (32.74) 6570 (29.22) 5270 (23.44) 3670 (16.32) 2580 (11.47) – –
O 8770 (39.01) 8580 (38.16) 8180 (36.38) 7690 (34.21) 6970 (31.00) 6260 (27.84) 5460 (24.29)
P 12560 (55.87) 11970 (53.24) 11360 (50.53) 10480 (46.62) 9470 (42.12) 8370 (37.23) 6880 (30.60)
Q 15940 (70.90) 14750 (65.61) 13160 (58.54) 10560 (46.97) 7370 (32.78) 5170 (23.00) – –
R 17550 (78.06) 17150 (76.29) 16360 (72.77) 15360 (68.32) 13970 (62.14) 12570 (55.91) 10970 (48.80)
Column Loads assume no lateral support.
Reference page 222 for general fitting and standard finish specifications.
226
 O
Uneven T-Section Uneven Channel
Section
R
ction Uneven I-Section

ether to create combination shapes.

oad capacities of these combinations.

120
” (3048 mm)
Lbs. kN

– –
– –
1610 (7.16)
2060 (9.16)
– –
3210 (14.28)

120
” (3048 mm)
Lbs. kN

– –
– –
4460 (19.84)
5370 (23.89)
– –
8960 (39.85)

Strut Systems
 AHHK-1/4 & AHHK-3/8
AIR HANDLER HANGING KIT
• Standard finishes: ZN
• Load CapacityPer Kit: 400 Lbs. (181.4 kg)

Item # Description Quantity

AHHK AHHK
1
/4 3
/8
1 Rod Hanger Fitting 4 4
2 Lag Screw 4 4
3 Hex Head Cap Screw 4 4
4 Flat Washer (For HHCS) 4 4
5 Hex Nuts (For HHCS) 4 4
6 Hex Nuts (For Hanging Rods) 16 16
7 Flat Washer (See Note 1) 16 -
8 Hanging Rods (72” Long) 4 4
9 SA158 (36” Long) 2 2
Note 1: Flat washers are required for 1/4”-20 hanging rods only.
SA101 SA102
CONNECTION PLATE ANGLE BRACE
• Standard finishes: ZN, GRN • Standard finishes: ZN, GRN
• Wt./C 67 Lbs. (30.4 kg) • Wt./C 15 Lbs. (6.8 kg)
53/32” 33/16”
(129.4) (80.9)
12 Gauge 14 Gauge
29/32” 33/16”
(57.9) (80.9)
73/8”
(187.3)

SA155
SWIVEL CASTER
• Safety Factor of 1.5
• 300 Lbs. (136.1 kg) maximum load
capacity
• Caster material: Phenolic
• Standard finishes: ZN, GRN
• Wt./Ea. 2.2 Lbs. (1.0 kg)
4”
41/2”
(101.6)
(114.3)
4” (101.6)
Dia. Wheels
51/4”
(133.4)
SA155
SWIVEL CASTER SA110
• Safety Factor of 1.5
SLOTTED ANGLE CUTTER
• 300 Lbs. (136.1 kg) maximum load • Standard finishes:
capacity • Wt./Ea. 16 Lbs. (7.26 kg)
• Caster material: Phenolic
• Standard finishes: ZN, GRN
• Wt./Ea. 2.2 Lbs. (1.0 kg)
4”
41/2”
(101.6)
(114.3)
4” (101.6)
Dia. Wheels
51/4”
(133.4)
Slotted Angle

CLEATS: To reinforce load-bearing joints, cleats can be field made by cutting 2 1/4” (57.1) long segments from the widest slotted
light duty cleats and SA318 for heavy duty cleats.
SPLICE PLATES: To assemble two pieces of slotted angle using a butt joint requires a 6” (152.4) splice plate for reinforcement.

Reference page 222 for general fitting and standard finish specific
Strut Systems 227

8 Hanging rods come in 72”

lengths. Rods can be field cut
for
proper height requirement.

1
6
7
SA154
RIGID CASTER
• Safety Factor of 1.5
• 300 Lbs. (136.1 kg) maximum load
capacity
• Caster material: Phenolic
• Standard finishes: ZN, GRN
• Wt./Ea. 2.0 Lbs. (.91 kg)
4”
41/2”
(101.6)
(114.3)
4” (101.6)
1
5 /4” Dia. Wheels
(133.4)
 SA131
SLOTTED STRAP
• Hole pattern is identical to the hole
pattern in slotted angles
• Standard length: 10’ (3.05 m)
• Standard finishes: Pre-Galv. (GALV)
• Material thickness: 14 gauge (1.9)
15/16”
(33.3)

cutting 2 1/4” (57.1) long segments from the widest slotted angle available. Use SA276 for

oint requires a 6” (152.4) splice plate for reinforcement.

e 222 for general fitting and standard finish specifications.

227

ging rods come in 72”

ods can be field cut
2 or
ght requirement. 3 4
5
 METRIC CONVERSION CHART
To Convert From To Multiply By To Convert From To
Angle Length
degree radian (rad) 0.01745329 foot (ft) meter (m)
radian (rad) degree 57.29578 inch (in) meter (m)
mil meter (m)
Area inch (in) micrometer (µm)
foot
2
square meter (m ) 2
0.09290304 meter (m) foot (ft)
inch2
square meter (m ) 2
0.00064516 meter (m) inch (in)
circular mil square meter (m ) 2
meter (m) mil
sq. centimeter (cm ) 2 0.0000000005067075
square inch (in ) 2
0.1550003 micrometer (µm) inch (in)
square meter (m ) 2
foot
2
10.76391
square meter (m ) 2
inch 2
1550.003 Volume
square meter (m ) 2
circular mil 1973523000.0 foot3
cubic meter (m ) 3

inch3
cubic meter (m ) 3

Temperature cubic centimeter (cm )2

cubic inch (in ) 3

degree Fahrenheit degree Celsius t° =(t° -32)/1.8

C F
cubic meter (m )3
foot3

degree Celsius degree Fahrenheit t° =1.8t° +32

F C
cubic meter (m )3
inch 3

gallon (U.S. liquid) cubic meter (m ) 3

Force
pounds-force (lbf) newtons (N) 4.448222 Section Properties
section modulus S (in )
3
S (m ) 3

moment of inertia I (in ) 4

I (m )
4

modulus of elasticity E (psi) E (Pa)

section modulus S (m )3
S (in ) 3

moment of inertia I (m ) 4
I (in )
4

modulus of elasticity E (Pa) E (psi)

To Convert From To Multiply By Abbreviations
Defl. = Deflection
Bending Moment or Torque
S.F. = Safety Factor Ft. = Feet
lbf • ft newton meter (N•m) 1.355818 Pre-galv. = Pre-galvanized Steel
lbf • in newton meter (N•m) 0.1129848 K Factor = Deflection ÷ load in Lbs./Ft.
N•m lbf • ft 0.7375621 o.c. = On Center
N•m lbf • in 8.850748 PVC = Poly Vinyl Chloride In. = Inch
psi = Pounds per Square Inch wt./c = Weig
Mass per 100 pieces
0.02834952 Metric Symbols
ounce (avoirdupois) kilogram (kg) m = meter
pound (avoirdupois) kilogram (kg) 0.4535924 cm = centimeter mm = millimeter µm =
micrometer kg = kilogram
ton (short, 2000 lb) kilogram (kg) 907.1847
N = newton
ton (long, 2240 lb) kilogram (kg) 1016.047 kN = kilonewton Pa = pascal
kilogram (kg) ounce (avoirdupois) 35.27396 MPa = megapascal
kilogram (kg) pound (avoirdupois) 2.204622
kilogram (kg) ton (short, 2000 lb) 0.001102311
kilogram (kg) ton (long, 2240 lb) 0.0009842064
Mass Per Unit Length
1.488164
lb/ft kilogram per meter (kg/m)
lb/in kilogram per meter (kg/m) 17.85797
kg/m lb/ft 0.6719689
kg/m lb/in 0.5599741
Mass Per Unit Volume
16.01846
lb/ft
3
kilogram per cubic meter (kg/m ) 3

lb/in 3
kilogram per cubic meter (kg/m ) 3
27679.9
kg/m 3
lb/ft
3
0.06242797
kg/m 3
lb/in 3
0.0000361273
 lbs/ft 3
lbs/in 3
1728.0
Mass Per Unit Area
4.882428
lb/ft 2
kilogram per square meter (kg/m )
2

kg/m 2
pound per square foot (lb/ft )
2
0.2048161
Pressure or Stress
6894.757
lbf/in (psi)2
pascal (Pa)
kip/in (ksi) 2
pascal (Pa) 6894757.0
lbf/in (psi)2
megapascals (MPa) 0.006894757
pascal (Pa) pound-force per square inch (psi) 0.0001450377
pascal (Pa) kip per square inch (ksi) 0.0000001450377
megapascals (MPa) lbf/in (psi)
2
145.0377
Reference Data

228
 Multiply By

0.3048
0.0254
0.0000254
25400.00
3.280840
39.37008
39370.08
0.00003937008

0.02831685
0.00001638706
0.06102374
35.31466
61023.76
0.003785412

0.00001638706
0.0000004162314
6894.757
61023.74
2402510.0
0.0001450377

n
ctor Ft. = Feet
galvanized Steel
ction ÷ load in Lbs./Ft.

Chloride In. = Inch

r Square Inch wt./c = Weight

r mm = millimeter µm =
= kilogram

Pa = pascal
cal
Strut Systems
 DESIGN LOAD DATA (For typical channel-fitting connections when USED IN PAIRS).
90° Fittings

Channel
Thickness Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN
12 ga. (2.6) 1500 (6.67) 1000 (4.45) 2000 (8.90) 1500 (6.67) 1500 (6.67) 1000 (4.45)
14 ga. (1.9) 1000 (4.45) 650 (2.89) 1500 (6.67) 1150 (5.12) 1000 (4.45) 650 (2.89)
16 ga. (1.5) 750 (3.34) 500 (2.22) 900 (4.00) 650 (2.89) 1000 (4.45) 500 (2.22)
Reference Data

Design load data includes a safety factor of 2.5 (safety factor = ratio of ultimate load to design load).
90° Fittings Flat Fittings

Channel
Thickness Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN Lbs. kN
12 ga. (2.6) 2500 (11.12) 2000 (8.90) 3000 (13.34) 2500 (11.12) 1000 (4.45) 1000 (4.45)
14 ga. (1.9) 2000 (8.90) 1650 (7.34) 2000 (8.90) 1650 (7.34) 500 (3.56) 800 (3.56)
16 ga. (1.5) 1500 (6.67) 1250 (5.56) 1500 (6.67) 1250 (5.56) 600 (2.67) 600 (2.67)

Strut Systems 229

 kN
(4.45)
(2.89)
(2.22)

design load).
tings

kN
(4.45)
(3.56)
(2.67)
 General Notes for Strut-Type Channel Raceway
UL Catagory RIUU - B-Line, Inc., Highland, IL 62249 December 11, 1998 (C) F . E29637 FLUORE
LIGHTING
Suitable for not more than the number of wires of the sizes and types indicated in the following tables. Intended
potentials not exceeding 600 volts between conductors. In all cases, the B217-20 or B217P snap-in cover is requ
closure. When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger tha
B-Line’s strut-type channel raceways and fittings are manufactured and tested to comply with the UL Standard fo
Channel Raceways and Fittings (UL 5B) in accordance with Article 384 of the 2002 National Electrical Code, NFPA
1. Support spans for strut-type channel raceway shall not exceed 10 foot intervals.
2. No conductor larger than that for which the raceway is listed shall be installed in strut-type channel raceways.
over 6AWG are allowed in any of B-Line’s strut-type channel raceway. See tables 1,
2 and 3 below for a listing of the approved conductors for B-Line’s strut-type channel raceways.
3. The number of conductors permitted in strut-type channel raceway shall not exceed the percentage fill using T
applicable outside diameter of specific types and sizes of wire given in the tables in chapter 9 of the National Ele
two different percent fill areas depending on the use of internal or external joiners. Use 40% area fill with extern
internal joiners.
4. Items in the electrical section of the B-Line Strut Systems Catalog identified by the UL symbol provide for elec
require the use of a separate grounding wire.
5. If strut-type channel raceway is connected to another wiring system, the raceway must be field-tapped adjace
accept a #10-32 or larger grounding screw. A plated or stainless steel screw may be used. A sheet metal screw i
the grounding wire hole before installing wires in raceway or move installed wires out of the way to avoid damag
remove metal chips and burrs before installing screw.
Reference Data

TABLE 1: MAXIMUM NUMBER OF WIRES (Adjusted per NEC Table 384.22 for 40% fill)
Use this table to determine the type and number of conductors for use with B-Line’s strut-type channel raceway
table applies for all installations except for the support and supply of electric discharge type lighting fixtures. See
information.
Insulation Wire Size B11 B12 B22 B24 B26 B32
Type AWG. B11K06 B12K06 B22K06 B24K06 B26K06 B32K06
FEP, 14 172 127 81 81 81 67
12 126 92 59 59 59 49
FEPB 10 90 66 42 42 42 35
8 51 38 24 24 24 20
6 24 17 11 12 12 9
14 52 38 24 26 27 20
RH, RHH, 12 45 33 21 22 23 17
10 37 27 17 18 19 14
RHW 8 20 14 9 10 10 7
6 14 10 6 7 7 5
14 124 91 58 58 58 48
T, TW 12 95 70 45 45 45 37
10 69 51 33 33 33 27
8 36 26 17 18 19 14
6 21 15 9 10 11 8
 14 178 131 84 84 84 69
THHN, 12 130 95 61 61 61 50
10 82 60 38 38 38 32
THWN 8 46 34 21 22 22 17
6 33 24 15 16 16 12
14 82 61 39 39 39 32
THW 12 66 49 31 31 31 26
10 52 38 24 24 24 20
8 29 21 13 14 15 11
6 21 15 10 10 11 8
14 124 91 58 58 58 48
XHHW 12 95 70 45 45 45 37
10 71 52 33 33 33 28
8 37 27 17 19 19 14
6 27 20 13 14 14 10
230
 F . E29637 FLUORESCENT AND INCANDESCENT

following tables. Intended to enclose circuits operating at

217P snap-in cover is required to complete raceway
er conductors no larger than #12 AWG.
ply with the UL Standard for Safety for Strut-Type
ional Electrical Code, NFPA 70.

ut-type channel raceways. No wires under 14AWG or

aceways.
d the percentage fill using Table 384-22 and the
hapter 9 of the National Electrical Code. Table 384-22 lists
e 40% area fill with external joiners and 25% area fill for

UL symbol provide for electrical continuity. Other items

must be field-tapped adjacent to the wire entry point to

sed. A sheet metal screw is not acceptable. Drill and tap
of the way to avoid damage. After drilling and tapping,

fill)
trut-type channel raceway using external joiners. This
e type lighting fixtures. See table 2 and 3 for further

B56
B56K06
36
26
19
11
5
12
10
8
4
3
26
20
14
8
5
37
27
17
10
7
17
14
11
6
5
26
20
15
8
6
Strut Systems
 TABLE 2: MAXIMUM NUMBER OF WIRES
Also suitable for the number of wires in table below when installed to support and supply electric discharge type ligh
wiring is suitable for at least 70°C and clearance between fixture and raceway is at least 1/8”. In all cases, a snap-in co
raceway enclosure.
Raceway Catalog Wires
Wire Size B11 B12 B22 B24 B26 B32
B11K06 B12K06 B22K06 B24K06 B26K06 B32K06
Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW
14 13 10 10 10 10 10
12 13 10 10 10 10 10
10 13 10 8 8 8 6
8 10 8 6 6 6 4
6 8 6 4 4 4 3
Reference Data

When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 A
TABLE 3: MAXIMUM NUMBER OF WIRES
Also suitable for the number of wires in table below when installed to support and supply electric discharge type ligh
wiring is suitable for 75°C, or wiring suitable for 60°C if a minimum clearance between fixture and raceway is at leas
cover is required to complete the raceway enclosure.

Raceway Catalog Wires

Wire Size B11 B12 B22 B24 B26 B32
B11K06 B12K06 B22K06 B24K06 B26K06 B32K06
Type Insulation: FEP, FEPB, RH, RHH, RHW, RUH, THHN, THWN, THW, XHHW
14 10 10 10 10 10 10
12 10 10 10 10 10 10
10 8 5 5 5 5 5
8 6 4 4 4 4 4
6 4 4 4 4 4 4
When using B217-24 snap-in cover, the number of wires is limited to 7 or fewer conductors no larger than #12 A
Strut Systems 231
pply electric discharge type lighting fixtures when raceway
1
/8”. In all cases, a snap-in cover is required to complete the

B56
B56K06
W
6
6
–
–
–

uctors no larger than #12 AWG.

pply electric discharge type lighting fixtures when raceway

fixture and raceway is at least 1/2”. In all cases, a snap-in

B56
B56K06
W
4
3
–
–
–
uctors no larger than #12 AWG.
 The data shown in the beam load charts for appropriate channels on page(s) 17 thru 39 is for simply supported,
uniformly distributed load. For other loading and/or support conditions, use the appropriate factor from the chart

Load and Support Condition Load Factor Deflection Factor

Simple Beam - Uniform Load 1.00 1.00

Span
Simple Beam - Concentrated Load at Center
Simple Beam - Two Equal Concentrated Loads at 1/4 Points
Beam Fixed at Both Ends - Uniform Load 0.50 0.80
Beam Fixed at Both Ends - Concentrated Load at Center
Cantilever Beam - Uniform Load
Cantilever Beam - Concentrated Load at End
Continuous Beam - Two Equal Spans - Uniform Load on One Span 1.00 1.10
Span Span
Continuous Beam - Two Equal Spans - Concentrated Load on Both Spans
Continuous Beam - Two Equal Spans - Concentrated Load at Center of One Span
Continuous Beam - Two Equal Spans - Concentrated Load at Center of Both Spans 1.50 0.30

1.00 0.40

0.25 2.40

0.12 3.20

1.30 0.92

1.00 0.42

0.62 0.71

0.67 0.48
Reference Data

EXAMPLES:
PROBLEM: PROBLEM:
Calculate the maximum allowable load and corresponding Calculate the maximum allowable load and correspondin
B22 beam with a concentrated deflection of a cantilever B52 beam with a uniformly distributed load at midspan as shown
load.
96”
SOLUTION: SOLUTION:
From beam load chart for B22 (page 22), maximum allowable From beam load chart for B52 (page 33), maximum allow
corresponding deflection is B. load is A and the corresponding deflection is B.
Multiplying by the appropriate factors shown in the chart above. Multiplying by the appropriate factors shown in chart abo

LOAD = A x load factor = LOAD = A x load factor =

DEFLECTION = B x deflection factor = DEFLECTION = B x deflection factor =
232
hru 39 is for simply supported, single span beams with a
propriate factor from the chart below.

Deflection Factor

1.00

0.80

1.10

0.30

0.40

2.40

3.20

0.92

0.42

0.71

0.48

m allowable load and corresponding deflection of a simply supported

tributed load at midspan as shown.
 for B52 (page 33), maximum allowable load is A and the
on is B.
ropriate factors shown in chart above.

ection factor =
Strut Systems
 RIGID STEEL CONDUIT (HEAVY WALL CONDUIT)
Nominal Conduit Outside Diameter Nominal Inside Minimum Weight Per 100 Ft. Weight of Conduit and
Size In. mm Diameter (30.5m) with Conductors Per 100 Ft.
In. mm In. mm Couplings Attached (30.5m)*
Lbs. kg Lbs. kg

/” 3 8 (10) 0.675 (17.1) 0.493 (12.5) 51.5 (23.4) 65.1

/” 1 2 (15) 0.840 (21.3) 0.632 (16.0) 79.0 (35.8) 101.1
/”
3 4 (20) 1.050 (26.7) 0.836 (21.3) 105.0 (47.6) 145.8
1” (25) 1.315 (33.4) 1.063 (27.0) 153.0 (69.4) 219.3
11/4” (32) 1.660 (42.2) 1.394 (35.4) 201.0 (91.2) 318.3
11/2” (40) 1.900 (48.3) 1.624 (41.3) 249.0 (113.0) 408.8
2” (50) 2.375 (60.3) 2.083 (52.9) 332.0 (150.6) 593.8
21/2” (65) 2.875 (73.0) 2.489 (63.2) 527.0 (239.1) 901.0
3” (80) 3.500 (88.9) 3.090 (78.5) 682.6 (309.6) 1259.0
31/2” (90) 4.000 (101.6) 3.570 (90.7) 831.0 (376.9) 1604.0
4” (100) 4.500 (114.3) 4.050 (102.9) 972.3 (441.0) 1967.0
5” (125) 5.563 (141.3) 5.073 (128.9) 1313.6 (595.9) 2876.0
6” (150) 6.625 (168.3) 6.093 (154.8) 1745.3 (791.7) 4003.0
Reference Data

Dimensions taken from ANSI C80.1-1977.

*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
INTERMEDIATE METAL CONDUIT (IMC)
Nominal Conduit Outside Diameter Nominal Inside Minimum Weight Per 100 Ft. Weight of Conduit and
Size In. mm Diameter (30.5m) with Conductors Per 100 Ft.
In. mm In. mm Couplings Attached (30.5m)*
Lbs. kg Lbs. kg

/”
1 2 (15) 0.815 (20.7) 0.675 (17.1) 60.0 (27.2) 82.1
/” 3 4 (20) 1.029 (26.1) 0.879 (22.3) 82.0 (37.2) 122.8
1” (25) 1.290 (32.7) 1.120 (28.4) 116.0 (52.6) 182.3
11/4” (32) 1.638 (41.6) 1.468 (37.3) 150.0 (68.0) 267.3
11/2” (40) 1.883 (47.7) 1.703 (43.3) 182.0 (82.5) 341.8
2” (50) 2.360 (59.9) 2.170 (55.1) 242.0 (109.7) 503.8
21/2” (65) 2.857 (72.5) 2.597 (66.0) 428.0 (194.1) 775.0
3” (80) 3.476 (88.3) 3.216 (81.7) 526.0 (238.6) 1069.0
31/2” (90) 3.971 (100.8) 3.711 (94.3) 612.0 (277.6) 1346.0
4” (100) 4.466 (113.4) 4.206 (106.8) 682.0 (309.4) 1632.0
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Rigid and Intermediate Metal Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 m
box, cabinet, or fitting, except for straight runs of conduit connected with couplings which may be supported in a
and 346, provided such supports prevent transmission of stresses to termination where conduit is deflected betw

NEC TABLE 346-12

Conduit Size Maximum Support Span
In. mm Feet Meters
 /-/
1 2 3 4 (15-20) 10 (3.05)
1 (25) 12 (3.66)
11/4-11/2 (32-40) 14 (4.27)
2-21/2 (50-65) 16 (4.88)
3-6 (80-150) 20 (6.10)
Strut Systems 233
Weight of Conduit and
Conductors Per 100 Ft.
(30.5m)*
Lbs. kg

(29.5)
(45.9)
(66.1)
(99.5)
(144.4)
(185.4)
(269.3)
(408.7)
(571.1)
(727.6)
(892.2)
(1304.5)
(1815.7)

ectrical Code.

Weight of Conduit and

Conductors Per 100 Ft.
(30.5m)*
Lbs. kg

(37.2)
(55.7)
(82.7)
(121.2)
(155.0)
(228.5)
(351.5)
(485.0)
(610.8)
(740.5)
ectrical Code.
and within 3 feet (914 mm) of each outlet box, junction
ch may be supported in accordance with NEC Article 345
conduit is deflected between supports.
 ELECTRICAL METALLIC TUBING (EMT) — THINWALL CONDUIT
Nominal Conduit Outside Diameter Inside Diameter Weight Weight of Conduit and
Size In. mm In. mm Per 100 Ft. (30.5m) Conductors Per 100 Ft.
In. mm Lbs. kg (30.5m)*
Lbs. kg

/”
3 8 (10) 0.577 (14.7) 0.493 (12.5) 23.0 (10.4) 36.6
/” 1 2 (15) 0.706 (17.9) 0.622 (15.8) 28.5 (12.9) 50.6
/” 3 4 (20) 0.922 (23.4) 0.824 (20.9) 43.5 (19.7) 84.3
1” (25) 1.163 (29.5) 1.049 (26.6) 64.0 (29.0) 130.3
11/4” (32) 1.510 (38.3) 1.380 (35.1) 95.0 (43.1) 212.3
11/2” (40) 1.740 (44.2) 1.610 (40.9) 110.0 (49.9) 269.8
2” (50) 2.197 (55.8) 2.067 (52.5) 140.0 (63.5) 401.8
21/2” (65) 2.875 (73.0) 2.731 (69.4) 205.0 (93.0) 579.0
3” (80) 3.500 (88.9) 3.356 (85.2) 250.0 (113.4) 826.3
31/2” (90) 4.000 (101.6) 3.834 (97.4) 325.0 (147.4) 1098.0
4” (100) 4.500 (114.3) 4.334 (110.1) 370.0 (167.8) 1364.0
Reference Data

Dimensions taken from ANSI C80.3-1977.

*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Electrical Metallic tubing shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each o
cabinet, or fitting. See NEC Article 348.
RIGID ALUMINUM CONDUIT

Nominal Conduit Outside Diameter Nominal Inside Minimum Weight Per 100 Ft. Weight of Conduit and
Size In. mm Diameter (30.5m) with Conductors Per 100 Ft.
In. mm In. mm Couplings Attached (30.5m)*
Lbs. kg Lbs. kg

/”
1 2 (15) 0.840 (21.3) 0.632 (16.1) 27.4 (12.4) 49.5
/” 3 4 (20) 1.050 (26.7) 0.836 (21.2) 36.4 (16.5) 77.2
1” (25) 1.315 (33.4) 1.063 (27.0) 53.0 (24.0) 119.3
11/4” (32) 1.660 (42.2) 1.394 (35.4) 69.6 (31.6) 186.9
11/2” (40) 1.900 (48.3) 1.624 (41.2) 82.2 (37.3) 242.0
2” (50) 2.375 (60.3) 2.083 (52.9) 115.7 (52.5) 377.5
21/2” (65) 2.875 (73.0) 2.489 (63.2) 182.5 (82.8) 556.5
3” (80) 3.500 (88.9) 3.090 (78.5) 238.9 (108.4) 815.2
31/2” (90) 4.000 (101.6) 3.570 (90.7) 287.7 (130.5) 1061.0
4” (100) 4.500 (114.3) 4.050 (102.9) 340.0 (154.2) 1334.0
5” (125) 5.563 (141.3) 5.073 (128.9) 465.4 (211.1) 2028.0
6” (150) 6.625 (168.3) 6.093 (154.8) 612.5 (277.8) 2870.0
 Dimensions taken from ANSI C80.5-1977.
*Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code.
Aluminum Rigid Conduit shall be supported at least every 10 feet (3.05 m) and within 3 feet (914 mm) of each o
or fitting, except for straight runs of conduit connected with couplings which may be supported in accordance wi
provided such supports prevent transmission of stresses to termination where conduit is deflected between supp
NEC TABLE 344.30 (B)(2)

Conduit Size Maximum Support Span

In. mm Feet Meters
/-/
1 2 3 4 (15-20) 10 (3.05)
1 (25) 12 (3.66)
1 / -11/2
1 4 (32-40) 14 (4.27)
2-21/2 (50-65) 16 (4.88)
3-6 (80-150) 20 (6.10)
234
Weight of Conduit and
Conductors Per 100 Ft.
(30.5m)*
Lbs. kg

(16.6)
(23.0)
(38.2)
(59.1)
(96.3)
(122.4)
(182.3)
(262.6)
(374.8)
(498.0)
(618.7)

ectrical Code.
feet (914 mm) of each outlet box, junction box,

Weight of Conduit and

Conductors Per 100 Ft.
(30.5m)*
Lbs. kg

(22.5)
(35.0)
(54.1)
(84.8)
(109.8)
(171.2)
(252.4)
(369.8)
(481.3)
(605.1)
(919.9)
(1301.8)
ectrical Code.
feet (914 mm) of each outlet box, junction box, cabinet,
pported in accordance with NEC Table 344.30 (B)(2),
s deflected between supports.

Strut Systems
 SCHEDULE 40 PVC PLASTIC PIPE
Nominal Pipe Outside Diameter Inside Diameter Weight of Pipe Per 100 Ft. Weight of Pipe Filled With
Size In. mm In. mm (30.5m) Water Per 100 Ft. (30.5m)
In. mm Lbs. kg Lbs. kg

/”
1 8 (3) 0.405 (10.3) 0.269 (6.8) 4.7 (2.1) 7.2
/” 1 4 (6) 0.540 (13.7) 0.364 (9.2) 8.2 (3.7) 12.7
/”
3 8 (10) 0.675 (17.1) 0.493 (12.5) 10.9 (4.9) 19.2
/”
1 2 (15) 0.840 (21.3) 0.622 (15.8) 16.4 (7.4) 29.6
/”
3 4 (20) 1.050 (26.7) 0.824 (20.9) 21.8 (9.9) 44.9
1” (25) 1.315 (33.4) 1.049 (26.6) 32.1 (14.6) 69.6
11/4” (32) 1.660 (42.2) 1.380 (35.1) 43.4 (19.7) 108.2
11/2” (40) 1.900 (48.3) 1.610 (40.9) 51.8 (23.5) 140.0
2” (50) 2.375 (60.3) 2.067 (52.5) 69.5 (31.5) 214.9
21/2” (65) 2.875 (73.0) 2.469 (62.7) 109.6 (49.7) 317.1
3” (80) 3.500 (88.9) 3.068 (77.9) 143.5 (65.1) 463.9
31/2” (90) 4.000 (101.6) 3.548 (90.1) 175.6 (79.7) 604.1
4” (100) 4.500 (114.3) 4.026 (102.3) 204.3 (92.7) 756.0
5” (125) 5.563 (141.3) 5.047 (128.2) 281.7 (127.8) 1148.8
6” (150) 6.625 (168.3) 6.065 (154.1) 360.9 (163.7) 1613.0
8” (200) 8.625 (219.1) 7.981 (202.7) 545.3 (247.3) 2713.5
10” (250) 10.750 (273.1) 10.020 (254.5) 791.3 (358.9) 4208.9
12” (300) 12.750 (323.9) 11.938 (303.2) 1035.2 (469.6) 5886.4
Reference Data
 1 cubic ft. of water weighs 62.41 Lbs. CLAMP SIZING CHART FOR PVC COATED RIGI
1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) CLAMP SIZING CHART FOR PVC COATED THIN
weighs 8.335 Lbs. CLAMPS
1 liter weighs .999 kg. 235
ALL THREADED ROD (ATR)
Dimensions taken from ANSI B1.1-1982 Unified Inch Screw
Threads. All threads are UNCR series.
Tabulated loads are based on an allowable tensile stress of
12000 psi (82.7 MPa) reduced by 25% resulting in 9000 psi
(62 MPa). From ANSI/MSS SP-58, Table 3.
Strut Systems

Conduit Coating
Nominal .020 (.51mm) .040 (1.01mm)
Conduit Clamp Coating Clamp Coating
Size 0 .020 (.51mm) 0 .020 (.51mm)

/”
1 2 (15) B2028 B2002 B2002 B2029
/”
3 4 (20) B2030 B2030 B2030 B2003
1” (25) B2032 B2032 B2032 B2033
11/4” (32) B2005 B2005 B2005 B2005
11/2” (40) B2012 B2037 B2037 B2037
2” (50) B2013 B2041 B2041 B2041
2/”
1 2 (65) B2014 B2045 B2045 B2045
3” (80) B2015 B2050 B2050 B2050
3/”
1 2 (90) B2016 B2054 B2054 B2054
4” (100) B2017 B2058 B2058 B2058
5” (125) B2019 B2066 B2066 B2066
6” (150) B2020 B2115 B2115 B2115
Nominal Size
(In) Root Area Design Load (SF=5)
and Thread In.2 cm2 Lbs. kN

/ -20”
1 4
0.027 (0.174) 240 (1.07)
 / -18”
5 16
0.045 (0.290) 400 (1.78)
/ -16”
3 8
0.068 (0.438) 730 (3.24)
/ -13”
1 2
0.126 (0.812) 1350 (6.00)
/ -11”
5 8
0.202 (1.303) 2160 (9.60)
/ -10”
3 4
0.302 (1.948) 3230 (14.37)
/ -9”
7 8
0.419 (2.703) 4480 (19.93)
1-8” 0.551 (3.561) 5900 (26.24)
11/8-7” 0.693 (4.471) 7450 (33.14)
11/4-7” 0.889 (5.735) 9500 (42.25)
11/2-6” 1.293 (8.342) 13800 (61.38)
Conduit Coating
Nominal .020 (.51mm) .040 (1.01mm)
Conduit Clamp Coating Clamp Coating
Size 0 .020 (.51mm) 0 .020 (.51mm)

/”
3 8 (10) B2026 B2026 B2026 B2007
/”
1 2 (15) B2027 B2027 B2027 B2008
/”
3 4 (20) B2029 B2029 B2029 B2009
1” (25) B2003 B2031 B2031 B2031
11/4” (32) B2004 B2034 B2034 B2034
11/2” (40) B2035 B2035 B2035 B2036
2” (50) B2039 B2039 B2039 B2013
Weight of Pipe Filled With
Water Per 100 Ft. (30.5m)
Lbs. kg

(3.2)
(5.8)
(8.7)
(13.4)
(20.4)
(31.6)
(49.1)
(63.5)
(97.5)
(143.8)
(210.4)
(274.0)
(342.9)
(521.1)
(731.7)
(1230.8)
(1909.1)
(2670.0)
T FOR PVC COATED RIGID CONDUIT AND CLAMPS
T FOR PVC COATED THINWALL (EMT) CONDUIT AND
 COPPER TUBING, TYPE L
Nominal Tubing Size Outside Diameter Inside Diameter Weight of Tubing Per 100 Ft. Weight of Tubing Filled
In. mm In. mm In. mm (30.5m) With Water Per 100 Ft.
Lbs. kg (30.5m)
Lbs. kg

/”
1 4 (6) 0.375 (9.5) 0.315 (8.0) 12.6 (5.7) 16.0
/”
3 8 (10) 0.500 (12.7) 0.430 (10.9) 19.8 (9.0) 26.1
/”
1 2 (15) 0.625 (15.9) 0.545 (13.8) 28.5 (12.9) 38.6
/”
5 8 (17) 0.750 (19.1) 0.666 (16.9) 36.2 (16.4) 51.3
/”
3 4 (20) 0.875 (22.2) 0.785 (19.9) 45.5 (20.6) 66.5
1” (25) 1.125 (28.6) 1.025 (26.0) 65.5 (29.7) 101.3
11/4” (32) 1.375 (34.9) 1.265 (32.1) 88.4 (40.1) 142.9
11/2” (40) 1.625 (41.3) 1.505 (38.2) 114.0 (51.7) 191.1
2” (50) 2.125 (54.0) 1.985 (50.4) 175.0 (79.4) 309.1
21/2” (65) 2.625 (66.7) 2.465 (62.6) 248.0 (112.5) 454.8
3” (80) 3.125 (79.4) 2.945 (74.8) 333.0 (151.0) 628.2
31/2” (90) 3.625 (92.1) 3.425 (87.0) 429.0 (194.6) 828.3
4” (100) 4.125 (104.8) 3.905 (99.2) 538.0 (244.0) 1057.1
5” (125) 5.125 (130.2) 4.875 (123.8) 761.0 (345.2) 1570.0
6” (150) 6.125 (155.6) 5.845 (148.5) 1020.0 (462.7) 2182.9
8” (200) 8.125 (206.4) 7.725 (196.2) 1930.0 (875.4) 3961.3
10” (250) 10.125 (257.2) 9.625 (244.5) 3010.0 (1365.3) 6163.4
12” (300) 12.125 (308.0) 11.565 (293.8) 4040.0 (1832.5) 8592.8
Reference Data

COPPER TUBING, TYPE K

Nominal Tubing Size Outside Diameter Inside Diameter Weight of Tubing Per 100 Ft. Weight of Tubing Filled
In. mm In. mm In. mm (30.5m) With Water Per 100 Ft.
Lbs. kg (30.5m)
Lbs. kg

/”
1 4 (6) 0.375 (9.5) 0.305 (7.7) 14.5 (6.6) 17.7
/”
3 8 (10) 0.500 (12.7) 0.402 (10.2) 26.9 (12.2) 32.4
/”
1 2 (15) 0.625 (15.9) 0.527 (13.4) 34.4 (15.6) 43.9
/”
5 8 (17) 0.750 (19.1) 0.652 (16.6) 41.8 (19.0) 56.3
/”
3 4 (20) 0.875 (22.2) 0.745 (18.9) 64.1 (29.1) 83.0
1” (25) 1.125 (28.6) 0.995 (25.3) 83.9 (38.1) 117.6
11/4” (32) 1.375 (34.9) 1.245 (31.6) 104.0 (47.2) 156.8
11/2” (40) 1.625 (41.3) 1.481 (37.6) 136.0 (61.7) 210.7
2” (50) 2.125 (54.0) 1.959 (49.8) 206.0 (93.4) 336.6
21/2” (65) 2.625 (66.7) 2.435 (61.8) 293.0 (132.9) 494.8
3” (80) 3.125 (79.4) 2.907 (73.8) 400.0 (181.4) 687.7
31/2” (90) 3.625 (92.1) 3.385 (86.0) 512.0 (232.2) 902.0
4” (100) 4.125 (104.8) 3.857 (98.0) 651.0 (295.3) 1157.4
5” (125) 5.125 (130.2) 4.805 (122.0) 967.0 (438.6) 1752.9
6” (150) 6.125 (155.6) 5.741 (145.8) 1390.0 (630.5) 2511.9
8” (200) 8.125 (206.4) 7.583 (192.6) 2590.0 (1174.8) 4547.3
10” (250) 10.125 (257.2) 9.449 (240.0) 4030.0 (1828.0) 7069.2
12” (300) 12.125 (308.0) 11.315 (287.4) 5780.0 (2621.8) 10138.0
Dimensions taken from ASTM B 88-83.
1 cubic ft. of water weighs 62.41 Lbs.
1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) weighs 8.335 Lbs.
1 liter weighs .999 kg.

236
Weight of Tubing Filled
With Water Per 100 Ft.
(30.5m)
Lbs. kg

(7.2)
(11.8)
(17.5)
(23.3)
(30.2)
(45.9)
(64.8)
(86.7)
(140.2)
(206.3)
(285.0)
(375.7)
(479.5)
(712.1)
(990.2)
(1796.8)
(2795.7)
(3897.6)

Weight of Tubing Filled

With Water Per 100 Ft.
(30.5m)
Lbs. kg

(8.0)
(14.7)
(19.9)
(25.5)
(37.6)
(53.3)
(71.1)
(95.6)
(152.7)
(224.5)
(311.9)
(409.2)
(525.0)
(795.1)
(1139.4)
(2062.6)
(3206.5)
(4598.5)

Strut Systems
 STANDARD WEIGHT SCHEDULE 40 STEEL PIPE
Nominal Pipe Size Outside Diameter Inside Diameter Nominal Weight Per 100 Ft. Weight of Pipe Filled With Water
In. mm In. mm In. mm (30.5mm) Per 100 Ft. (30.5mm)
Plain End Lbs. kg
Lbs. kg

/”
3 8 (10) 0.675 (17.1) 0.493 (12.5) 57.0 (25.9) 65.3
/”
1 2 (15) 0.840 (21.3) 0.622 (15.8) 85.0 (38.6) 98.2
/”
3 4 (20) 1.050 (26.7) 0.824 (20.9) 113.0 (51.3) 136.1
1” (25) 1.315 (33.4) 1.049 (26.6) 168.0 (76.2) 205.5
11/4” (32) 1.660 (42.2) 1.380 (35.1) 227.0 (103.0) 291.8
11/2” (40) 1.900 (48.3) 1.610 (40.9) 272.0 (123.4) 360.2
2” (50) 2.375 (60.3) 2.067 (52.5) 365.0 (165.6) 510.4
21/2” (65) 2.875 (73.0) 2.469 (62.7) 579.0 (262.6) 786.5
3” (80) 3.500 (88.9) 3.068 (77.9) 758.0 (343.8) 1078.4
31/2” (90) 4.000 (101.9) 3.548 (90.1) 911.0 (413.2) 1339.5
4” (100) 4.500 (114.3) 4.026 (102.3) 1079.0 (489.4) 1630.7
5” (125) 5.563 (141.3) 5.047 (128.2) 1462.0 (663.2) 2329.1
6” (150) 6.625 (168.3) 6.065 (154.1) 1897.0 (860.5) 3149.1
8” (200) 8.625 (219.1) 7.981 (202.7) 2855.0 (1295.0) 5023.2
10” (250) 10.750 (273.1) 10.020 (254.5) 4048.0 (1836.1) 7465.6
12” (300) 12.750 (323.9) 12.000 (304.8) 4956.0 (2248.0) 9857.7
14” (350) 14.000 (355.6) 13.250 (336.6) 5457.0 (2475.3) 11433.1
16” (400) 16.000 (406.4) 15.250 (387.4) 6258.0 (2838.6) 14174.3
18” (450) 18.000 (457.2) 17.250 (438.2) 7059.0 (3201.9) 17187.9
20” (500) 20.000 (508.0) 19.250 (489.0) 7860.0 (3565.2) 20473.7
24” (600) 24.000 (609.6) 23.250 (590.6) 9462.0 (4291.9) 27862.5
Reference Data

Dimensions taken from ASTM A 53-82. 1 cubic ft. of water weighs 62.41 Lbs.
1 cubic meter of water weighs 999.972 kg. 1 gallon (U.S.) weighs 8.335 Lbs.
1 liter weighs .999 kg.
TRAPEZE HANGERS USING B-LINE STRUT OR ANGLE IRON

Nominal Pipe Sizes

Length of 21/2” (65mm)
Trapeze Bar or less 3” (80mm) 31/2” (90mm) 4” (100mm) 5” (125mm) 6” (150mm) 8” (200mm)

1’-6” 11/2” x 11/2” x 11/2” x 11/2” x 11/2” x 11/2” x 2” x 11/2” x 2” x 11/2” x 21/2” x 11/2” x 3” x 2” x 3/16”
(0.46m)
3
/16”
B24SH
3
/16” B24SH 3
/16”
B24SH
3
/16”B22SH 3
/16”
B22SH
3
/16”
B12SH B11SH
2’-0” 11/2” x 11/2” x 2” x 11/2” x 2” x 11/2” x 2” x 11/2” x 21/2” x 11/2” x 21/2” x 11/2” x 3” x 2” x 3/16”
(0.61m)
3
/16”
B24SH
3
/16B22SH
” 3
/16”
B22SH
3
/16”B22SH 3
/16”
B12SH
3
/16”
B12SH B11SH
2’-6” 2” x 11/2” x 3/16” 2” x 11/2” x 2” x 1 /2” x / ” 21/2” x 11/2” x
1 3 16
21/2” x 11/2” x 3” x 2” x 3/16” 3” x 2” x 1/4”
(0.76m) B22SH
3
/16B22SH
” B22SH / ” B12SH
3 16
/ ”
3 16
B12SH B11SH B11SH
3’-0” 2” x 11/2” x 3/16” 2” x 11/2” x 21/2” x 11/2” x 21/2” x 11/2” x 3” x 2” x 3/16” 3” x 2” x 3/16” 31/2” x 21/2” x
(0.91m) B22SH
3
/16B22SH
” 3
/16”
B12SH
3
/16”B12SH B11SH B11SH
1
/4 ”
B12SHA
4’-0” 21/2” x 11/2” x 21/2” x 11/2” x 21/2” x 11/2” x 3” x 2” x 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x
3
/16” 3
/16” 3
/16” 3
/16” 5
/16”
(1.22m) B12SH B12SH B12SH B11SH B11SH B11SH B12SHA
5’-0” 21/2” x 11/2” x 21/2” x 11/2” x 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 4” x 3” x 5/16”
(1.52m)
3
/16”
B12SH
3
/16” B12SH B11SH B11SH B11SH
5
/16”
B12SHA B12SHA
6’-0” 2 /2” x 11/2” x
1
3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 4” x 3” x 5/16” 4” x 3” x 5/16”
(1.83m)
3
/16”
B12SH B11SH B11SH B11SH
5
/16”
B12SHA B12SHA B12SHA
7’-0” 3” x 2” x 3/16” 3” x 2” x 3/16” 3” x 2” x 1/4” 3” x 2” x 1/4” 31/2” x 21/2” x 4” x 3” x 5/16” 5” x 31/2” x
(2.13m) B11SH B11SH B11SH B11SH
5
/16”
B12SHA B12SHA
5
/16”
B11SHA
8’-0” 3” x 2” x 3/16” 3” x 2” x 1/4” 3” x 2” x 1/4” 31/2” x 21/2” x 3 /2” x 21/2” x
1
4” x 3” x 5/16” 5” x 31/2” x
(2.44m) B11SH B11SH B11SH
5
/16”B12SHA 5
/16”
B12SHA B12SHA
5
/16”
B11SHA
9’-0” 3” x 2” x 3/16” 3” x 2” x 1/4” 31/2” x 21/2” x 31/2” x 21/2” x 31/2” x 21/2” x 4” x 3” x 5/16” 5” x 31/2” x
(2.74m) B11SH B11SH
5
/16”
B12SHA
5
/16”B12SHA 5
/16”
B12SHA B12SHA
5
/16”
B11SHA
10’-0” 3” x 2” x 1/4” 3” x 2” x 1/4” 3 /2” x 2 /2” x 31/2” x 21/2” x
1 1
4” x 3” x 5/16” 5” x 31/2” x 6” x 4” x 1/4”
(3.05m) B11SH B11SH
5
/16”
B12SHA
5
/16”B12SHA B12SHA
5
/16”
B11SHA 2-B12SHA
REFERENCE: Table 3-14.1.6 standard for the installation of Sprinkler Systems, NFPA No. 13-1985, published by N
Association.
Strut Systems 237
ght of Pipe Filled With Water
Per 100 Ft. (30.5mm)
Lbs. kg

(29.6)
(44.5)
(61.7)
(93.2)
(132.4)
(163.4)
(231.5)
(356.8)
(489.2)
(607.6)
(739.7)
(1056.4)
(1428.4)
(2278.5)
(3386.3)
(4471.4)
(5185.9)
(6429.4)
(7796.3)
(9286.7)
(12638.2)

8” (200mm) 10” (250mm)

3” x 2” x 3/16” 3” x 2” x 1/4”
B11SH B11SH
3” x 2” x 3/16” 3” x 2” x 1/4”
B11SH B11SH
3” x 2” x 1/4” 3” x 2” x 1/4”
B11SH B11SH
31/2” x 21/2” x 31/2” x 21/2” x
1
/4 ”
B12SHA
5
/16”
B12SHA
31/2” x 21/2” x 4” x 3” x 5/16”
5
/16”
 B12SHA B12SHA
4” x 3” x 5/16” 5” x 31/2” x
B12SHA
5
/16”
B11SHA
4” x 3” x 5/16” 5” x 31/2” x
B12SHA
5
/16”
B11SHA
5” x 31/2” x 6” x 4” x 1/4”
5
/16”
B11SHA 2-B12SHA
5” x 31/2” x 6” x 4” x 1/4”
5
/16”
B11SHA 2-B12SHA
5” x 31/2” x 6” x 4” x 3/8”
5
/16”
B11SHA 2-B11SHA
6” x 4” x 1/4” 6” x 4” x 3/8”
2-B12SHA 2-B11SHA
No. 13-1985, published by National Fire Protection
Tolco™ to B-Line Cross Reference
Tolco B-Line Tolco B-Line Tolco B-
Fig# Pt. # Fig# Pt. # Fig# Pt
2 STR 1/2” B2400-1/2 BC-14-5/8 B321-4 BR-22-12
2 STR /4” . . . . . . . . . . . . . . . B2400-3/4
3
BC-14-3/4 B321-5 BR-22-18
2 STR 1” B2400-1 BC-16 B314 BR-22-24
2 STR 11/4” . . . . . . . . . . . B2400-11/4 BC-17 B441-22 C SAFETY END CAP
2 STR 11/2” . . . . . . . . . . . B2400-11/2 BC-18-3/8 . . . . . . . . . . . . . . . . . B212-3/8 C-14
2 STR 2” B2400-2 BC-18-1/2 . . . . . . . . . . . . . . . . . B212-1/2 C-14 END CAP
2 STR 21/2” . . . . . . . . . . . B2400-21/2 BC-19 B427 CL-10
2 STR 3” B2400-3 BC-20 B355 CR ISOLATOR
2 STR 31/2” . . . . . . . . . . . B2400-31/2 BC-21 B211 CUSH CLP 1/4
2 STR 4” B2400-4 BC-23 B614 CUSH CLP 3/8
2 STR 5” B2400-5 BC-70 B760-22 Series CUSH CLP 1/2
2 STR 6” B2400-6 BC-71 B760-22A Series CUSH CLP 5/8
2 STR 8” B2400-8 BC-72 B761-22 Series CUSH CLP 3/4
65XT N/C BC-73 B761-22A Series CUSH CLP 1
69 B3367 BR-10-8L B185SHL CUSH CLP 11/8
69R N/C BR-10-8R B185SHR CUSH CLP 11/4
75 N/C BR-10-10L B186SHL CUSH CLP 13/8
98 SC228 BR-10-10R B186SHR CUSH CLP 11/2
98B N/C BR-10-12L B178SHL CUSH CLP 15/8
310 B2501 BR-10-12R B178SHR CUSH CLP 13/4
310N 1/4 . . . . . . . . . . . . . . . . . N2501-1/4 BR-10-18L B181SHL CUSH CLP 2
310N 3/8 . . . . . . . . . . . . . . . . . N2501-3/8 BR-10-18R B181SHR CUSH CLP 21/8
310N 1/2 . . . . . . . . . . . . . . . . . N2501-1/2 BR-10-20L B182SHL CUSH CLP 21/2
310N 5/8 . . . . . . . . . . . . . . . . . N2501-5/8 BR-10-20R B182SHR CUSH CLP 25/8
310N 3/4 . . . . . . . . . . . . . . . . . N2501-3/4 BR-11-81/2 B187 CUSH CLP 3
310N 7/8 . . . . . . . . . . . . . . . . . N2501-7/8 BR-11-101/2 B541 CUSH CLP 31/8
902 B335V BR-11-121/2 B289-12 CUSH CLP 35/8
912 B335-1 BR-11-141/2 B289-14 CUSH CLP 4
913 B335-2 BR-11-22 B292 CUSH CLP 45/8
914 B335 BR-12 B290 CUSH CLP 51/8
915 B634 BR-13 B194 CUSH CLP 61/8
915D B635 BR-14 B370 CUSH CLP IPS 1/4
A SAFETY END CAP B822 BR-15-18 B196-18 CUSH CLP IPS 3/8
A-12 B22 BR-15-24 B196-24 CUSH CLP IPS 1/2
A-12 End Cap B205 BR-16-6 . . . . . . . . . . . . . . . . . . B198A-6 CUSH CLP IPS 3/4
A-12 End Spot B3322 BR-16-12 . . . . . . . . . . . . . . . B198A-12 CUSH CLP IPS 1
A-14 B24 BR-17-12 B297-12 CUSH CLP IPS 11/4
A-14 End Cap B223 BR-17-18 B297-18 CUSH CLP IPS 11/2
BC-09 B312 Series BR-17-24 B297-24 CUSH CLP IPS 2
BC-10 B751 BR-17-30 B297-30 CUSH CLP IPS 21/2
BC-11 B751-J Series BR-17-36 B297-36 CUSH CLP IPS 3
BC-12 B751-J Series BR-18-6 B293-6 CUSH CLP IPS 31/2
BC-13-1/4 B303 BR-18-12 B293-12 CUSH CLP IPS 4
BC-13-5/16 B304 BR-19-18 . . . . . . . . . . . . . . . B293A-18 CUSH CLP IPS 5
BC-13-3/8 B305 BR-18-24 B293-24 CUSH CLP IPS 6
BC-13-1/2 B307 BR-19-6 . . . . . . . . . . . . . . . . . . B293A-6 CUSH STRIP
BC-13-5/8 B309 BR-18-12 B293-12 D-12
BC-13-3/4 B321-5 BR-19-18 . . . . . . . . . . . . . . . B293A-18 D-12 END CAP
BC-14-1/4 B303 BR-19-24 . . . . . . . . . . . . . . . B293A-24 E SAFETY END CAP
BC-14-5/16 B304 BR-20 B439 E-12
BC-14-3/8 B321-1 BR-21 B356 E-12 END CAP
BC-14-1/2 B321-2 BR-22-6 B409-6 EMTC-1/2
 BC-10 B751 BR-17-30 B297-30 CUSH CLP IPS 21/2
BC-11 B751-J Series BR-17-36 B297-36 CUSH CLP IPS 3
BC-12 B751-J Series BR-18-6 B293-6 CUSH CLP IPS 31/2
BC-13-1/4 B303 BR-18-12 B293-12 CUSH CLP IPS 4
BC-13-5/16 B304 BR-19-18 . . . . . . . . . . . . . . . B293A-18 CUSH CLP IPS 5
BC-13-3/8 B305 BR-18-24 B293-24 CUSH CLP IPS 6
BC-13-1/2 B307 BR-19-6 . . . . . . . . . . . . . . . . . . B293A-6 CUSH STRIP
BC-13-5/8 B309 BR-18-12 B293-12 D-12
BC-13-3/4 B321-5 BR-19-18 . . . . . . . . . . . . . . . B293A-18 D-12 END CAP
BC-14-1/4 B303 BR-19-24 . . . . . . . . . . . . . . . B293A-24 E SAFETY END CAP
BC-14-5/16 B304 BR-20 B439 E-12
BC-14-3/8 B321-1 BR-21 B356 E-12 END CAP
BC-14-1/2 B321-2 BR-22-6 B409-6 EMTC-1/2
Tolco to B-Line Cross

238
Tolco B-Line
Fig# Pt. #
BR-22-12 B409-12
BR-22-18 B409-18
BR-22-24 B409-25
C SAFETY END CAP B852
C-14 B54
C-14 END CAP B204
CL-10 B217-20
CR ISOLATOR ISO
CUSH CLP 1/4 BVT025
CUSH CLP 3/8 BVT037
CUSH CLP 1/2 BVT050
CUSH CLP 5/8 BVT062
CUSH CLP 3/4 BVT075
CUSH CLP 1 BVT100
CUSH CLP 11/8 BVT112
CUSH CLP 11/4 BVT125
CUSH CLP 13/8 BVT137
CUSH CLP 11/2 BVT150
CUSH CLP 15/8 BVT162
CUSH CLP 13/4 BVT175
CUSH CLP 2 BVT200
CUSH CLP 21/8 BVT212
CUSH CLP 21/2 BVT250
CUSH CLP 25/8 BVT262
CUSH CLP 3 BVT300
CUSH CLP 31/8 BVT312
CUSH CLP 35/8 BVT362
CUSH CLP 4 BVT400
CUSH CLP 45/8 N/A
CUSH CLP 51/8 N/A
CUSH CLP 61/8 BVT612
CUSH CLP IPS 1/4 BVP025
CUSH CLP IPS 3/8 BVP037
CUSH CLP IPS 1/2 BVP050
CUSH CLP IPS /4
3
BVP075
CUSH CLP IPS 1 BVP100
CUSH CLP IPS 11/4 BVP125
CUSH CLP IPS 11/2 BVP150
CUSH CLP IPS 2 BVP200
CUSH CLP IPS 21/2 BVP250
CUSH CLP IPS 3 BVP300
CUSH CLP IPS 31/2 BVP350
CUSH CLP IPS 4 BVP400
CUSH CLP IPS 5 BVP500
CUSH CLP IPS 6 BVP600
CUSH STRIP B1999
D-12 B12
D-12 END CAP B221
E SAFETY END CAP B822-A
E-12 B11
E-12 END CAP B222
EMTC-1/2 B2001
CUSH CLP IPS 21/2 BVP250
CUSH CLP IPS 3 BVP300
CUSH CLP IPS 31/2 BVP350
CUSH CLP IPS 4 BVP400
CUSH CLP IPS 5 BVP500
CUSH CLP IPS 6 BVP600
CUSH STRIP B1999
D-12 B12
D-12 END CAP B221
E SAFETY END CAP B822-A
E-12 B11
E-12 END CAP B222
EMTC-1/2 B2001

Strut Systems
 Tolco™ to B-Line Cross Reference
Tolco B-Line Tolco B-Line
Fig# Pt. # Fig# Pt. #
EMTC-3/4 B2002 L-23 U B844
EMTC-1 B2003 L-24 L B503L
EMTC-11/4 B2004 L-24 R B503R
EMTC-11/2 B2005 L-25 L B503L
EMTC-2 B2006 L-25 B503R
F-09 B129 L-26 L B236L
F-10 B200D L-26 R B236R
F-11 B201D L-27 B357
F-12-1/2 B202-D L-28 B237
F-12-5/8 B202-1D L-29 B240-378
F-12-3/4 B202-2D L-30 B558
F-13 B200 L-31 L B235L
F-14 B201 L-31 R B235R
F-15 B202 L-32 B126
F-15 B202 L-33 B127
F-16 B202-1 L-34 B118
F-17 B202-2 L-35 B239
F-18 N/C L-36 L B234L
F-20 B141 L-36 R B234R
F-21 B342 L-37 B112
F-22 B340 L-38 B113
F-23 B341 L-39 B461
F-24 B504 L-40 B533
F-25 B133 L-41 B485
F-26 B138 L-42 L B134L
F-27 B139 L-42 R B134R
F-28 B132 L-43 B125
F-29 B339 L-44-12 B261-12
F-30 B337 L-44-16 B261-16
F-31 B136 L-44-18 B261-18
F-32 B532 L-45-30 B162
F-33 B142 L-45-45 B154
F-34 B556 L-45-60 B150
F-35 B135 L-46-30 B246
F-36 B140 L-46-45 B248
F-37 B143 L-46-60 B250
F-38 B334 L-47-30 N/C
HEX HEAD BOLTS HHCS L-47-45 B155
L-08 B231 L-47-60 B159
L-10 B101 L-48-30 N/C
L-11 B230 L-48-45 B368
L-12-3 B359 L-48-60 B366
L-12-31/2 B360 NUT 1/4 N224WO
L-12-4 B361 NUT 3/8 N228WO
L-15 B372 NUT 1/2 N225WO
L-16 B496-1 NUT 5/8 N255WO
L-17 B496 NUT 3/4 N275WO
L-18 B102 NUT 7/8 N278WO
L-19 B232 OD 1/4 B2023
L-20 B103 OD 3/8 B2024
L-21 B371-2 OD 1/2 B2025
L-22 B104 OD 5/8 B2026
 L-10 B101 L-48-30 N/C
L-11 B230 L-48-45 B368
L-12-3 B359 L-48-60 B366
L-12-31/2 B360 NUT 1/4 N224WO
L-12-4 B361 NUT 3/8 N228WO
L-15 B372 NUT 1/2 N225WO
L-16 B496-1 NUT 5/8 N255WO
L-17 B496 NUT 3/4 N275WO
L-18 B102 NUT 7/8 N278WO
L-19 B232 OD 1/4 B2023
L-20 B103 OD 3/8 B2024
L-21 B371-2 OD 1/2 B2025
L-22 B104 OD 5/8 B2026
Tolco to B-Line Cross

Strut Systems 239

Cross Reference
Tolco B-Line
Fig# Pt. #
OD 3/4 B2027
OD 7/8 B2008
OD 1 B2029
OD 11/8 B2030
OD 11/4 B2031
OD 13/8 B2032
OD 11/2 B2004
OD 15/8 B2011
OD 13/4 B2005
OD 17/8 B2036
OD 2 B2037
OD 21/8 B2038
OD 21/4 B2039
OD 23/8 B2013
OD 21/2 B2041
OD 25/8 B2042
OD 23/4 B2043
OD 27/8 B2014
OD 3 B2045
OD 31/8 B2046
OD 31/4 B2047
OD 33/8 B2048
OD 31/2 B2015
OD 35/8 B2050
OD 33/4 B2051
OD 37/8 B2052
OD 4 B2016
OD 51/8 B2062
OD 51/4 B2063
OD 53/8 B2064
OD 51/2 B2019
OD 55/8 B2066
OD 53/4 B2067
OD 57/8 B2068
OD 6 B2069
OD 61/8 B2110
OD 61/4 B2111
OD 63/8 B2112
OD 61/2 B2113
OD 65/8 B2020
OD 63/4 B2115
OD 67/8 B2116
OD 7 B2117
OD 71/8 B2118
OD 71/4 B2119
OD 73/8 B2120
OD 71/2 B2121
OD 75/8 B2021
OD 73/4 B2123
OD 77/8 B2124
OD 8 B2125
OD 81/8 B2126
OD 65/8 B2020
OD 63/4 B2115
OD 67/8 B2116
OD 7 B2117
OD 71/8 B2118
OD 71/4 B2119
OD 73/8 B2120
OD 71/2 B2121
OD 75/8 B2021
OD 73/4 B2123
OD 77/8 B2124
OD 8 B2125
OD 81/8 B2126
Tolco™ to B-Line Cross Reference
Tolco B-Line Tolco B-Line Tolco B-
Fig# Pt. # Fig# Pt. # Fig# P
OD 81/4 B2127 RIGID 2 B2013 TSN 3/8
OD 83/8 B2128 RIGID 21/2 B2014 TSN 1/2
OD 81/2 B2129 RIGID 3 B2015 U-10
OD 85/8 B2022 RIGID 31/2 B2016 U-11
OD 83/4 B2133 RIGID 4 B2017 U-12
OD 87/8 B2134 RIGID 5 B2019 U-13-71/4
OD 9 B2135 RIGID 6 B2120 U-13-81/2
OD 91/2 B2139 RIGID 8 B2122 U-13-103/8
OD 95/8 B2140 ROL-10 B377 U-16
OD 10 B2143 ROL-11 B376 U-18
OD 103/4 B2130 ROL-12* B218 U-22 B
OD 11 B2151 ROL-13 B219 Series U-24 B
OD 115/8 B2156 ROL-14 B379 U-26
OD 12 B2159 ROL-15 B479 U-29
OD 123/4 B2132 ROL-16 B3126 Series U-30
OD CP 3/8 B2024DCU SPRA 1/4 N224 U-31
OD CP 1/2 B2025DCU SPRA 3/8 N228 U-32
OD CP 5/8 B2026DCU SPRA 1/2 N225 U-33
OD CP 3/4 B2027DCU SPRA 5/8 N255 U-34
OD CP 7/8 B2008DCU SPRA 3/4 N275 UNIV-1/2
OD CP 11/8 B2030DCU SPRA 7/8 N278 UNIV-3/4
OD CP 13/8 B2032DCU SPRC 1/4 N524 UNIV-1
OD CP 15/8 B2011DCU SPRC 3/8 N528 UNIV-11/4
OD CP 21/8 B2038DCU SPRC 1/2 N525 UNIV-11/2
OD CP 25/8 B2042DCU SPRC 5/8 N555 UNIV-2
OD CP 31/8 B2046DCU SPRC 3/4 N575 W-10 L
OD CP 35/8 B2050DCU SPRD 1/4 N724 W-10 R
OD CP 41/8 B2054DCU SPRD 3/8 N728 W-11 L
OD CP 51/8 B2062DCU SPRD 1/2 N725 W-11 R
OD CP 61/8 B2110DCU SPRD 5/8 N755 W-12
P-09 B280FL SPRD 3/4 N775 W-13
P-10 B279 SPRM 1/4 SN224 W-14
P-10 F B279FL SPRM 3/8 SN228 W-16
P-10 SQ B279SQ SPRM 1/2 SN225 W-17
P-11 B280 SPRM /8
5
SN255 W-18
P-11 F B280FL SWF 3/8 . . . . . . . . . . . . . . . . . B446A-3/8 W-19
P-11 SQ B280SQ SWF 1/2 . . . . . . . . . . . . . . . . . B446A-1/2 W-20
P-12 B281A SWF 5/8 . . . . . . . . . . . . . . . . . B446A-5/8 W-21
P-12 F B281AFL SWF 3/4 . . . . . . . . . . . . . . . . . B446A-3/4 W-22 L
P-12 SQ B281ASQ SWFF 3/8 . . . . . . . . . . . . . . . B446C-3/8 W-22 R
P-13 B281 SWFF 1/2 . . . . . . . . . . . . . . . B446C-1/2 W-23
P-13 F B281FL SWFF 5/8 . . . . . . . . . . . . . . . B446C-5/8 W-24
P-13 SQ B281SQ SWFF 3/4 . . . . . . . . . . . . . . . B446C-3/4 W-25
P-14 B585 SWM 3/8 . . . . . . . . . . . . . . . . B446B-3/8 Z-10
P-15 B278 SWM 1/2 . . . . . . . . . . . . . . . . B446B-1/2 Z-15
PIPE PIER DURA-BLOKS SWM 5/8 . . . . . . . . . . . . . . . . B446B-5/8 Z-17
RIGID 3/8 B2001 SWM 3/4 . . . . . . . . . . . . . . . . B446B-3/4 Z-25
RIGID 1/2 B2008 SWMF 3/8 . . . . . . . . . . . . . . . . B446-3/8
RIGID 3/4 B2009 SWMF 1/2 . . . . . . . . . . . . . . . . B446-1/2
RIGID 1 B2010 SWMF 5/8 . . . . . . . . . . . . . . . . B446-5/8
RIGID 11/4 B2011 SWMF 3/4 . . . . . . . . . . . . . . . . B446-3/4
RIGID 11/2 B2012 TSN 1/4 TN224
 P-12 SQ B281ASQ SWFF 3/8 . . . . . . . . . . . . . . . B446C-3/8 W-22 R
P-13 B281 SWFF 1/2 . . . . . . . . . . . . . . . B446C-1/2 W-23
P-13 F B281FL SWFF 5/8 . . . . . . . . . . . . . . . B446C-5/8 W-24
P-13 SQ B281SQ SWFF 3/4 . . . . . . . . . . . . . . . B446C-3/4 W-25
P-14 B585 SWM 3/8 . . . . . . . . . . . . . . . . B446B-3/8 Z-10
P-15 B278 SWM 1/2 . . . . . . . . . . . . . . . . B446B-1/2 Z-15
PIPE PIER DURA-BLOKS SWM 5/8 . . . . . . . . . . . . . . . . B446B-5/8 Z-17
RIGID 3/8 B2001 SWM 3/4 . . . . . . . . . . . . . . . . B446B-3/4 Z-25
RIGID 1/2 B2008 SWMF 3/8 . . . . . . . . . . . . . . . . B446-3/8
RIGID 3/4 B2009 SWMF 1/2 . . . . . . . . . . . . . . . . B446-1/2
RIGID 1 B2010 SWMF 5/8 . . . . . . . . . . . . . . . . B446-5/8
RIGID 11/4 B2011 SWMF 3/4 . . . . . . . . . . . . . . . . B446-3/4
RIGID 11/2 B2012 TSN 1/4 TN224
Tolco to B-Line Cross

240
Tolco B-Line
Fig# Pt. #
TSN 3/8 TN228
TSN 1/2 TN225
U-10 B107
U-11 B116-52
U-12 B116-12
U-13-71/4 B333-1
U-13-81/2 B333-2
U-13-103/8 B333-3
U-16 B107-22A
U-18 B398-1
U-22 B169, B170
U-24 B167, B172
U-26 B173
U-29 B400-1
U-30 B400-3
U-31 B425
U-32 B519
U-33 B581
U-34 N/C
UNIV-1/2 B2208
UNIV-3/4 B2209
UNIV-1 B2210
UNIV-11/4 B2211
UNIV-11/2 B2212
UNIV-2 B2213
W-10 L B267L
W-10 R B267R
W-11 L B269L
W-11 R B269R
W-12 B119
W-13 B120
W-14 B121
W-16 B271
W-17 B272
W-18 B273
W-19 B122
W-20 B124
W-21 B123
W-22 L B274L
W-22 R B274R
W-23 B276
W-24 B495
W-25 B362
Z-10 B105
Z-15 B108
Z-17 B586
Z-25 B515
W-22 R B274R
W-23 B276
W-24 B495
W-25 B362
Z-10 B105
Z-15 B108
Z-17 B586
Z-25 B515

Strut Systems
 65XT-3/8 114 B22A3 21 B24KO6 41
69 . . . . . . . . . . . . . . . . 115 B22A4 21 B24KO6AL 178
69R 115 B22AAL 177 B24M 42
75 . . . . . . . . . . . . . . . . . 55 B22AD3 21 B24S 40
98 . . . . . . . . . . . . . . . . . 57 B22AL 177 B24S58 42
98B 57 B22B 21 B24SH 40
ACPD Series 220 B22B3 21 B24SHAL 178
ACPW Series 220 B22C 21 B24SHSS4 180
ACS Series 221 B22C3 21 B24SHSS6 180
ADH Series 219 B22D 21 B24SS4 180
AHHK-1/4 227 B22D3 21 B24SS6 180
AHHK- /8 3
227 B22E 21 B26 26,27
APC Series 220 B22E3 21 B26A 26,27
ARC Series 219 B22H17/8 40 B26B 26
ARS Series 219 B22H17/8AL 178 B26C 26
ASA Series 221 B22H17/8SS4 180 B26H17/8 40
ATM-37 221 B22H25 42 B26H25 42
ATR 58 B22-I Series 214 B26KO6 41
AWA Series 219 B22-IFS 218 B26S 40
AWS-CH 221 B22KO6 41 B26S58 42
AWS-OH 221 B22KO6AL 178 B26SH 40
AWS-PH 221 B22LPL 21 B32 28,29
B11 16,17 B22M 42 B32A 28,29
B11A 16,17 B22PL 21 B32B 28
B11AL 177 B22S 40 B32C 28
B11B 17 B22S58 42 B32H17/8 40
B11H1 /8 7
40 B22SH 40 B32H1 /8SS4
7
180
B11KO6 41 B22SHA 41 B32H25 42
B11S 40 B22SHAL 178 B32-I Series 215
B11S58 42 B22SHSS4 180 B32-IFS 218
B11SH 40 B22SHSS6 180 B32KO6 41
B12 18,19 B22SS4 180 B32M 42
B12A 18,19 B22SS6 180 B32S 40
B12AL 177 B22TH 38,39,41 B32S58 42
B12B 18 B22X 20-23 B32SH 40
B12H17/8 40 B24 24,25 B32SHSS4 180
B12H17/8AL 178 B24A 24,25 B32SS4 180
B12KO6 41 B24AL 177 B42 30,31
B12KO6AL 178 B24B 24 B42A 30,31
B12S 40 B24C 24 B42B 30
B12S58 42 B24H17/8 40 B42H17/8 40
B12SH 40 B24H17/8AL 178 B42H17/8SS4 180
B12SHAL 178 B24H17/8SS4 180 B42H25 42
B22 20-23 B24H17/8SS6 180 B42KO6 41
Index B22A 20,22,23 B24H25 42 B42M 42

Strut Systems 241

B42S 40
B42S58 42
B42SH 40
B42SHSS4 180
B42SS4 180
B44M 42
B52 32,33
B52A 32,33
B52B3 32
B52B4 32
B52H17/8 40
B52H25 42
B52-I Series 216
B52-IFS 218
B52KO6 41
B52M 42
B52S 40
B52S58 42
B52SH 40
B52SHA 41
B52SHSS4 180
B52SHSS6 180
B52SS4 180
B52SS6 180
B54 34,35
B54A 34,35
B54AAL 177
B54AL 177
B54B3 34
B54B4 34
B54H17/8 40
B54H1 /8AL
7
178
B54H17/8SS4 180
B54H17/8SS6 180
B54H25 42
B54KO6 41
B54KO6AL 178
B54M 42
B54S 40
B54S58 42
B54SH 40
B54SHA 41
B54SHAL 178
B54SHSS4 180
B54SHSS6 180
B54SS4 180 B122 .............. 95 B171 86
B54SS6 180 B123 .............. 95 B172 86
B56 36,37 B124 . . . . . . . . . . . . . . 95 B172-12 86
B56A 36,37 B125 . . . . . . . . . . . . . . 79 B172-22A 86
B56B3 36 B126 . . . . . . . . . . . . . . 80 B173 89
B56B4 36 B127 .............. 80 B174SHL 101
B56H1 /8
7
40 B129 .............. 73 B174SHR 101
B56H25 42 B132 . . . . . . . . . . . . . . 74 B175SHL 101
B56KO6 41 B133 . . . . . . . . . . . . . . 74 B175SHR 101
B56S 40 B134L . . . . . . . . . . . . . 79 B176SHL 101
B56S58 42 B134R ............. 79 B176SHR 101
B56SH 40 B135 .............. 74 B177SHL 101
B62 201 B136 . . . . . . . . . . . . . . 75 B177SHR 101
B62A 201 B137 . . . . . . . . . . . . . . 75 B178SHL 101
B72 202 B138 . . . . . . . . . . . . . . 74 B178SHR 101
B72A 202 B139 .............. 74 B179SHL 101
B101 76 B140 .............. 74 B179SHR 101
B102 77 B141 .............. 73 B180SHL 101
B103 77 B142 . . . . . . . . . . . . . . 74 B180SHR 101
B104 77 B143 . . . . . . . . . . . . . . 74 B181SHL 101
B104SH 81 B147 .............. 82 B181SHR 101
B105 91 B148 .............. 82 B182SHL 101
B106-12 91 B149 .............. 82 B182SHR 101
B106-32 91 B150 . . . . . . . . . . . . . . 82 B183SHL 101
B106-42 91 B151 . . . . . . . . . . . . . . 82 B183SHR 101
B106-52 91 B152 .............. 82 B184SHL 101
B107 87 B154 .............. 82 B184SHR 101
B107-22A 87 B155 .............. 83 B185SHL 101
B107S 88,125 B156 . . . . . . . . . . . . . . 83 B185SHR 101
B108 91 B157 . . . . . . . . . . . . . . 83 B186SHL 101
B109S 81 B158 .............. 83 B186SHR 101
B110 91 B159 .............. 83 B187 99
B111 92 B160 .............. 83 B188 99
B112 81 B161 . . . . . . . . . . . . . . 83 B189 99
B113 81 B162 . . . . . . . . . . . . . . 82 B190 99
B115 77 B163 .............. 82 B191-18 99
B116-12 87 B164 . . . . . . . . . . . . . . 82 B191-24 100
B116-32 87 B165 . . . . . . . . . . . . . . 82 B192 100
B116-32A 87 B166 Series 171 B194 . . . . . . . . . . . . . 102
B116-42 87 B166-46 Series . . . 171 B195 . . . . . . . . . . . . . 103
B116-52 87 B166CL 171 B196-18 102
B118 79 B167 86 B196-24 102
B119 94 B168 86 B198-6 102
B120 95 B169 86 B198-12 102
 B121 95 B170 86 B198A-6 102
Index

242
B198A-12 102
B200 73
B200D 73
B201 73
B201D 73
B202 73
B202-1 73
B202-1D 73
B202-2 73
B202-2D 73
B202D 73
B203 110,167
B204 110,167
B205 110,167,218
B206 110,167,218
B210 116
B210A 116
B211 122
B212-1/4 122
B212-3/8 122
B213 122
B214L 106
B214R 106
B215S 165
B216S 165
B217-20 167
B217-24 167
B217AL 177
B217FFAL 177
B217P . . . 167,177,199
B218 147
B219 Series . . 148,149
B220 110,167,218
B221 110,167
B222 110,167
B223 110,167
B230 76
B231 76
B232 .............. 77
B234L ............. 79
B234R ............. 79
B235L . . . . . . . . . . . . . 78
B235R . . . . . . . . . . . . . 78
B236L . . . . . . . . . . . . . 78
B236R ............. 78

Strut Systems
B237 .............. 78 B281M 98 B333-3 89
B238L ............. 78 B281MSQ 98 B334 75
B238R . . . . . . . . . . . . . 78 B281SQ 98 B335 83
B239 . . . . . . . . . . . . . . 78 B283 110,167 B335-1 83
B241S . . . . . . . . . . . . 165 B284 . . . . . . . . 110,167 B335-2 Series 83
B243 .............. 82 B285 ........ 110,167 B335V Series 83
B244 .............. 82 B286 ........ 110,167 B337 75
B245 . . . . . . . . . . . . . . 82 B287 . . . . . . . . . . . . . 110 B339 75
B246 . . . . . . . . . . . . . . 82 B288 . . . . . . . . . . . . . 110 B340 . . . . . . . . . . . . . . 73 B393-1
B247 . . . . . . . . . . . . . . 82 B289-12 100 B341 . . . . . . . . . . . . . . 73 B394 Series
B248 .............. 82 B289-14 100 B342 .............. 73 B398-1
B249 .............. 82 B290 100 B346L ............. 95 B400
B250 . . . . . . . . . . . . . . 82 B291 . . . . . . . . . . . . . 100 B346R 95
B251 . . . . . . . . . . . . . . 82 B292 . . . . . . . . . . . . . 101 B349 108
B252 . . . . . . . . . . . . . . 82 B293 Series 102 B350 108
B253 .............. 82 B293A Series 102 B351L Series 113
B261 Series 85 B293PL 103 B355 122
B266 . . . . . . . . . . . . . . 88 B297 Series 101 B356 146
B267L . . . . . . . . . . . . . 94 B300 . . . . . . . . . . . . . . 98 B357 . . . . . . . . . . . . . . 78 B407 Series
B267R . . . . . . . . . . . . . 94 B303 . . . . . . . . . . . . . 117 B358 Series . . . . . . . 89 B408 Series

B268L ............. 94 B304 ............. 117 B359 . . . . . . . . . . . . . . 76

B268R ............. 94 B305 ............. 117 B360 . . . . . . . . . . . . . . 76
B269L . . . . . . . . . . . . . 94 B306 . . . . . . . . . . . . . 117 B361 . . . . . . . . . . . . . . 77
B269R . . . . . . . . . . . . . 94 B307 . . . . . . . . . . . . . 117 B362 . . . . . . . . . . . . . . 96
B270L . . . . . . . . . . . . . 94 B308 . . . . . . . . . . . . . 117 B363 . . . . . . . . . . . . . . 83
B270R ............. 94 B309 ............. 117 B364 . . . . . . . . . . . . . . 83
B271 . . . . . . . . . . . . . . 95 B312 Series . . . . . . 117 B365 . . . . . . . . . . . . . . 83
B272 . . . . . . . . . . . . . . 95 B314 . . . . . . . . . . . . . 121 B366 . . . . . . . . . . . . . . 83
B273 . . . . . . . . . . . . . . 95 B318 . . . . . . . . . . . . . 123 B367 . . . . . . . . . . . . . . 83
B274L 96 B319 . . . . . . . . . . . . . 123 B368 . . . . . . . . . . . . . . 83 B415
B274R 96 B320 ............. 123 B369 . . . . . . . . . . . . . . 83 B420-378
B276 95 B321 Series 117 B370 . . . . . . . . . . . . . 103 B420-578
B277 96 B322 82 B371 . . . . . . . . . . . . . . 80 B420-778
B278 98 B323 82 B371-2 . . . . . . . . . . . . 81 B420-978
B279 97 B324 82 B372 . . . . . . . . . . . . . . 80 B422 Series

B279FL 97 B325 .............. 82 B374 . . . . . . . . . . . . . . 77

B279SQ 97 B326 . . . . . . . . . . . . . . 82 B376 . . . . . . . . . . . . . 109
B280 97 B327 . . . . . . . . . . . . . . 82 B377 . . . . . . . . . . . . . 109
B280FL 97 B328 . . . . . . . . . . . . . . 82 B379 . . . . . . . . . . . . . 150
B280SQ 97 B329 . . . . . . . . . . . . . . 82 B380 Series 218
B281 98 B330 .............. 82 B381 107
B281A 97 B331 .............. 82 B382 . . . . . . . . . . . . . 107
B281AFL 97 B332 . . . . . . . . . . . . . . 82 B383 . . . . . . . . . . . . . 107
B281ASQ 97 B333-1 . . . . . . . . . . . . 89 B384 . . . . . . . . . . . . . 107
 B281FL 98 B333-2 ............ 89 B385 . . . . . . . . . . . . . 107
.
.
.
Index

Strut Systems 243

 B386 Series 144
B387 Series 92
B390BX 166
B390S 166
B392-11 Series . . . 168

B392-12 Series ... 168

B392-22 Series ... 168
B392-32 Series . . . 168
... 73 B393-1 171
. . . . 73 B394 Series 144
.... 73 B398-1 90
.... 95 B400 90
B400-1 ............ 90
B400-2 ............ 90
B400-3 . . . . . . . . . . . . 90

B400-4 ............ 90
B405 . . . . . . . . . . 89,123
B405A . . . . . . . . . . . . 123
... 78 B407 Series 92
. . . 89 B408 Series 89

B408SLBVNS 111
B409 Series 101
B410-11 93
B410-12 93
B410-22 93
B410-32 93
B410-52 . . . . . . . . . . . 93
B411 Series 107
B412 88
... 83 B415 90
... 83 B420-378 76
. . . 103 B420-578 76
. . . . 80 B420-778 76
. . . . 81 B420-978 76
. . . . 80 B422 Series 125,140

B425 . . . . . . . . . . . . . . 88
B427 . . . . . . . . . . . . . 123
B428 . . . . . . . . . . . . . . 93
B432 . . . . . . . . . . . . . . 75
B435 . . . . . . . . . . . . . 122
B436 . . . . . . . . . . . . . 166
B436S 166
B437 Series 139
B438 107
B439 107
B440 103 B500 Series ... 52,120 B591 Series 145
B441-22 Series 121 B501 Series 52 B593 . . . . . . . . . . . . . 125
B441-22A Series .121 B503L 80 B594 . . . . . . . . . . . . . . 88
B441Z-22 121 B503R 80 B595 . . . . . . . . . . . . . . 89
B441Z-22A 121 B504 74 B596 . . . . . . . . . . . . . . 88

B444 Series 116 B514L 106 B598-62 .......... 210

B761-22A Series . 1
B446 Series . . . 54,172 B514R 106 B600-62 .......... 204
B766 Series 1
B446A Series . . 54,172 B515 93 B601-62 . . . . . . . . . . 208
B446B Series . . 54,172 B516 167 B602-A . . . . . . . . . . . 123
B446C Series . 54,172 B516S 167 B602-B . . . . . . . . . . . 123

B447 168 B518 Series 169 B602-C 123

B447A 168 B519 88 B613 108,125
B449-4 103 B521 . . . . . . . . . . . . . . 81 B613A 108,125
B449-8 103 B522 . . . . . . . . . . . . . . 82 B614 108,125
B449-12 103 B526 . . . . . . . . . . . . . . 91 B616 Series 164

B449-18 103 B527 . . . . . . . . . . . . . . 87 B616-22A Series . 164

B450 Series 86 B528 . . . . . . . . . . . . . . 73 B616S Series 164
B451-1 89 B529 . . . . . . . . . . . . . . 77 B616S-22A Series 165
B451-2 89 B532 . . . . . . . . . . . . . . 75 B616TG-9/16 165
B451-3 89 B533 . . . . . . . . . . . . . . 80 B617 55,172

B460 Series 166 B534 . . . . . . . . . . . . . . 92 B619 171

B461 81 B535 . . . . . . . . . . . . . . 92 B631 Series ....... 85
B464 Series 166 B536 . . . . . . . . . . . . . . 90 B632 Series . . . . . . . 85
B465 166 B538 . . . . . . . . . . . . . . 92 B633 Series . . . . . . . 84
B466S 171 B539 . . . . . . . . . . . . . . 92 B634 . . . . . . . . . . . . . . 84

B466W 171 B541 . . . . . . . . . . . . . . 99 B635 ....... ....... 84

B472 . . . . . . . . . . . . . 106 B556 . . . . . . . . . . . . . . 75 B650 Series ....... 84
B473 . . . . . . . . . . . . . 106 B557 . . . . . . . . . . . . . . 73 B655 Series . . . . . . . 58
B474 . . . . . . . . . . . . . 106 B558 . . . . . . . . . . . . . . 77 B656 Series . . . . . . . 58
B475 . . . . . . . . . . . . . 106 B560 . . . . . . . . . . . . . 108 B663 .............. 80
B1508 132
B477 . . . . . . . . . . . . . 109 B562 . . . . . . . . . . . . . 108 B664 . . . . . . . . . . . . . 107
B1508S 132
B477H 109 B568 . . . . . . . . . . . . . . 75 B670 Series ...... 140
B1512
B477HP 109 B570 . . . . . . . . . . . . . . 98 B671 Series ...... 140
B1512S
B477P 109 B570A 98 B700 Series ...... 120
B1516 132
B478 109 B571 96 B701 Series ...... 118
B1516S 132
B478H 109 B578 88 B702 ............. 119
B1520 132

B478HP 109 B580 . . . . . . . . . . . . . . 93 B705 Series 119

B478P 109 B581 . . . . . . . . . . . . . . 88 B718 Series 169
B479 151 B585 . . . . . . . . . . . . . . 98 B719AL 169
B485 80 B586 . . . . . . . . . . . . . . 91 B750 Series 120

B488 . . . . . . . . . . . . . . 82 B587 Series 107 B751 118

B494 Series 101 B588 87 B751-J Series 118
B495 96 B589 171 B752 118
B496 81 B589-62 207 B753 Series 118
 B496-1 81 B590 172 B755 119
Index

244
 B755-3/8-J Series . 119
B756-3/8 119
B760-22 Series . . . 124
B760-22A Series . 124
B761-22 Series . . . 124
0
B761-22A Series . 124
4
B766 Series 170
B767 Series . . . . . . 170
B768 Series . . . . . . 170
B769 Series . . . . . . 170
B802D Series 104
B809B Series 105
B810 Series ...... 104
B811 Series ...... 105
B812 Series . . . . . . 105

B816 104
B822 110
B822A 110
B823-22 111
B823-22A 111

B823-42 .......... 111

B823-52 .......... 111
B825-22 . . . . . . . . . . 111
B825-52 . . . . . . . . . . 111
B844 . . . . . . . . . . . . . . 79

B844W . ........... 79
B852 110
B852S Series 104
B888W 79
B1508 132
B1508S 132
.. 140
B1512 132
.. 140
B1512S 132
B1516 132
B1516S 132
B1520 132

B1520S .......... 132

B1524S . . . . . . . . . . 132
B1532S . . . . . . . . . . 132
B1534S . . . . . . . . . . 132

B1540S .......... 132

B1548S . . . . . . . . . . 132
B1556S . . . . . . . . . . 132
B1564S . . . . . . . . . . 132
B1999 137

Strut Systems
B2000 128 B2019AL 178 B2062 131
B2001 128 B2019SS4 181 B2062DCU 129
B2001AL 178 B2020 128,131 B2063 131
B2001SS4 181 B2020AL 178 B2064 131
B2002 128 B2020SS4 181 B2066 131
B2003 . . . . . . . . . . . . 128 B2021 . . . . . . . . 128,131 B2067 ............ 131
B2004 . . . . . . . . 128,130 B2022 . . . . . . . . 128,131 B2068 ............ 131
B2005 . . . . . . . . 128,130 B2023 . . . . . . . . . . . . 130 B2069 . . . . . . . . . . . . 131
B2006 . . . . . . . . . . . . 128 B2024 . . . . . . . . . . . . 130 B2070 . . . . . . . . . . . . 139
B2008 . . . . . . . . 128,130 B2024DCU 129 B2071 . . . . . . . . . . . . 139

B2008AL 178 B2025 130 B2072 ............ 139

B2008DCU 129 B2025DCU 129 B2073 . . . . . . . . . . . . 139
B2008SS4 181 B2026 130 B2074 . . . . . . . . . . . . 139
B2009 128 B2026DCU 129 B2075 . . . . . . . . . . . . 139
B2009AL 178 B2027 130 B2076 . . . . . . . . . . . . 139

B2009SS4 181 B2027DCU 129 B2077 ............ 139

B2010 128 B2030 130 B2078 ............ 139
B2010AL 178 B2030DCU 129 B2079 ............ 139
B2010SS4 181 B2031 130 B2080 . . . . . . . . . . . . 139
B2011 128,130 B2032 130 B2084 . . . . . . . . . . . . 141

B2011AL 178 B2032DCU 129 B2085 ............ 141

B2011DCU 129 B2037 130 B2086 ............ 141
B2011SS4 181 B2038 130 B2087 ............ 141
B2012 128 B2038DCU 129 B2088 . . . . . . . . . . . . 141
B2012AL 178 B2039 130 B2089 . . . . . . . . . . . . 141

B2012SS4 181 B2041 130 B2090 ............ 141

B2013 128,130 B2042 130 B2091 . . . . . . . . . . . . 141
B2013AL 178 B2042DCU 129 B2110 . . . . . . . . . . . . 131
B2013SS4 181 B2043 . . . . . . . . . . . . 130 B2110DCU 129
B2014 128,130 B2045 . . . . . . . . . . . . 130 B2111 131
B2014AL 178 B2046 . . . . . . . . . . . . 130 B2112 131
B2014SS4 181 B2046DCU 129 B2113 ............ 131
B2015 128,130 B2047 130 B2115 . . . . . . . . . . . . 131
B2015AL 178 B2048 130 B2116 . . . . . . . . . . . . 131
B2015SS4 181 B2050 130 B2117 . . . . . . . . . . . . 131

B2016 128,130 B2050DCU 129 B2118 ............ 131

B2016AL 178 B2051 130 B2119 ............ 131
B2016SS4 181 B2052 130 B2120 . . . . . . . . . . . . 131
B2017 128,130 B2054 130 B2121 . . . . . . . . . . . . 131
B2017AL 178 B2054DCU 129 B2123 . . . . . . . . . . . . 131

B2017SS4 181 B2055 130 B2124 ............ 131

B2018 128,131 B2056 130 B2125 . . . . . . . . . . . . 131
B2018AL 178 B2058 130 B2126 . . . . . . . . . . . . 131
B2018SS4 181 B2059 . . . . . . . . . . . . 131 B2126DCU 129
Index B2019 128,131 B2060 . . . . . . . . . . . . 131 B2127 131

Strut Systems 245

 B2128 . . . . . . . . . . . . 131
B2129 . . . . . . . . . . . . 131
B2130 . . . . . . . . 128,131
B2132 . . . . . . . . 128,131
B2207 . . . . . . . . . . . . 127
B2208 . . . . . . . . . . . . 127
B2209 . . . . . . . . . . . . 127
B2210 . . . . . . . . . . . . 127
B2211 . . . . . . . . . . . . 127
B2212 . . . . . . . . . . . . 127
B2213 . . . . . . . . . . . . 127
B2301 Series 141
B2302 Series 141
B2308 . . . . . . . . . . . . 211
B2309 . . . . . . . . . . . . 211
B2310 . . . . . . . . . . . . 211
B2311 . . . . . . . . . . . . 211
B2312 . . . . . . . . . . . . 211
B2313 . . . . . . . . . . . . 211
B2314 . . . . . . . . . . . . 211
B2315 . . . . . . . . . . . . 211
B2350 . . . . . . . . . . . . 211
B2351 . . . . . . . . . . . . 211
B2352 . . . . . . . . . . . . 211
B2353 . . . . . . . . . . . . 211
B2354 . . . . . . . . . . . . 211
B2355 . . . . . . . . . . . . 211
B2400 Series 138
B2417 Series 139
B2500 217
B2501 Series 217
B2503 . . . . . . . . . . . . 217
B2505 . . . . . . . . . . . . 217
B2506 . . . . . . . . . . . . 217
B2507 . . . . . . . . . . . . 217
B2508 . . . . . . . . . . . . 217
B2601 . . . . . . . . . . . . 133
B2602 . . . . . . . . . . . . 133
B2603 . . . . . . . . . . . . 133
B2608 . . . . . . . . . . . . 133
B2609 . . . . . . . . . . . . 133
B2610 . . . . . . . . . . . . 133
B3033 Series 114
B3034 Series 114
B3036L Series 113
B3037Z 115 B4035D .......... 174 B6104 . . . . . . . . . . . . 206
B3322 110,218 B4035E ........... 174 B6105 . . . . . . . . . . . . 210
B3332 110,218 B4035F . . . . . . . . . . . 174 B6107 . . . . . . . . . . . . 209
B3342 . . . . . . . . 110,218 B4037B 174 B6107-62A 209
B3352 . . . . . . . . 110,218 B4050 174 B6108 210
B3362 Series ..... 113 B4051 ............ 174 B6110 ............ 210
B3363 Series ..... 113 B4060 ............ 173 B6112 ............ 207
B3364 Series . . . . . 113 B4061 . . . . . . . . . . . . 173 B6118 . . . . . . . . . . . . 207
B3365 Series . . . . . 113 B4062 . . . . . . . . . . . . 173 B6126 . . . . . . . . . . . . 207
B3367 Series . . . . . 115 B4063 . . . . . . . . . . . . 173 B6127 . . . . . . . . . . . . 207

B3367S-1 Series . 140 B4064 ............ 173 B6129 ............ 203

B3367S-2 Series . 140 B4065 . . . . . . . . . . . . 173 B6132 . . . . . . . . . . . . 205
B3373 Series 142 B4066 . . . . . . . . . . . . 173 B6133 . . . . . . . . . . . . 205
B3690 Series 143 B4067 . . . . . . . . . . . . 173 B6134L . . . . . . . . . . . 207
B3690F Series 143 B4068 . . . . . . . . . . . . 173 B6134R 207
B4000 . . . . . . . . . . . . 175 B4069 . . . . . . . . . . . . 173 B6135 205
B4001 . . . . . . . . . . . . 175 B4070 ............ 173 B6136 205
B4002 . . . . . . . . . . . . 175 B4071 . . . . . . . . . 173 B6138 204
B4003 . . . . . . . . . . . . 175 B4072 . . . . . . . . . . . . 173 B6139 204
B4004 . . . . . . . . . . . . 175 B4073 . . . . . . . . . . . . 173 B6140 204
B4005 . . . . . . . . . . . . 175 B4074 ............ 173 B6141 204
B4006 . . . . . . . . . . . . 175 B4075 ............ 173 B6142 205
B4007 . . . . . . . . . . . . 175 B4076 . . . . . . . . . . . . 173 B6143 204
B4008 . . . . . . . . . . . . 175 B4077 . . . . . . . . . . . . 173 B6144L 206
B4009 . . . . . . . . . . . . 175 B4078 . . . . . . . . . . . . 173 B6144R 206
B4010 . . . . . . . . . . . . 175 B4079 ............ 173 B6147 208
B4011 . . . . . . . . . . . . 175 B4080 ............ 173 B6148 208
B4012 . . . . . . . . . . . . 175 B4081 ............ 173 B6149 208
B4013 . . . . . . . . . . . . 175 B4082 . . . . . . . . . . . . 173 B6150 208
B4014 . . . . . . . . . . . . 175 B4083 . . . . . . . . . . . . 173 B6151 208
B4015 . . . . . . . . . . . . 175 B4084 ............ 173 B6152 208
B4016 . . .......... 175 B4085 ............ 173 B6154 ............ 208
B4017 . . .......... 175 B4086 ............ 173 B6155 ............ 208
B4033A . . . . . . . . . . 175 B4087 . . . . . . . . . . . . 173 B6156 . . . . . . . . . . . . 208
B4033B . . . . . . . . . . 175 B4088 . . . . . . . . . . . . 173 B6157 . . . . . . . . . . . . 208

B4033C .......... 175 B4089 ............ 173 B6158 ............ 208

B4033D .......... 175 B4090 ............ 173 B6159 ............ 208
B4033E . . . . . . . . . . . 175 B4091 . . . . . . . . . . . . 173 B6160 . . . . . . . . . . . . 208
B4033F . . . . . . . . . . . 175 B4092 . . . . . . . . . . . . 173 B6161 . . . . . . . . . . . . 208
B4033G . . . . . . . . . . 175 B4093 . . . . . . . . . . . . 173 B6162 . . . . . . . . . . . . 208

B4033H .......... 175 B4094 ............ 174 B6163 ............ 208

B4033I . .......... 175 B4095 ............ 174 B6164 ............ 208
B4035A . . . . . . . . . . 174 B6101 . . . . . . . . . . . . 205 B6165 . . . . . . . . . . . . 208
B4035B . . . . . . . . . . 174 B6102 . . . . . . . . . . . . 206 B6167 . . . . . . . . . . . . 209
 B4035C .......... 174 B6103 ............ 206 B6168 ............ 209
Index

246
B6169 ............ 208
B6170 ............ 209
B6171 . . . . . . . . . . . . 209
B6172 . . . . . . . . . . . . 209
B6173 . . . . . . . . . . . . 210

B6202 ............ 203

B6205 ............ 211
B6211 . . . . . . . . . . . . 211
B6230 . . . . . . . . . . . . 205
B6232 . . . . . . . . . . . . 206

B6234L . . . . . . . . . . . 207
B6234R . . . . . . . . . . 207
B6239 . . . . . . . . . . . . 206
B6337 . . . . . . . . . . . . 205
B6340 . . . . . . . . . . . . 203
B6341 . . . . . . . . . . . . 204
B6357 . . . . . . . . . . . . 206
B6374 . . . . . . . . . . . . 206
B6409 Series 211
B6504 . . . . . . . . . . . . 204
B6526 . . . . . . . . . . . . 210
B6532 . . . . . . . . . . . . 205
B6533 . . . . . . . . . . . . 207
B6557 . . . . . . . . . . . . 204
B6558 . . . . . . . . . . . . 206
B6571 . . . . . . . . . . . . 210
B6594 . . . . . . . . . . . . 209
B7105 . . . . . . . . . . . . 210
B7116 . . . . . . . . . . . . 209
B7205 . . . . . . . . . . . . 211
BC442 . . . . . . . . . . . . 116
BD40 218
BE-5-8 218
BE-9-12 218
BFP22 184,185
BFP22A 184,185
BFP22H17/8 184
BFP22I 188
BFP22SH 184
BFP42 186,187
BFP42A 186,187
BFP42H17/8 186
BFP42SH 186
BFP409 Series . . . 194
BFP494 Series ... 194

Strut Systems
BFP2400-2 ....... 192 BFV337 . . . . . . . . . . . 197 BKA25-063 Series . 70
BFP2400-3 ....... 192 BFV340 . . . . . . . . . . . 195 BKA25-063K Series . 70
BFP2400-4 . . . . . . . 192 BFV341 . . . . . . . . . . . 196 BKB25-063 Series . 68
BFP2400-6 . . . . . . . 192 BFV342 . . . . . . . . . . . 196 BKB25-06K3 Series . 69
BFP3104-8 . . . . . . . 193 BFV371-2G 198 BKB38-094 Series . 68

BFP3104-10 193 BFV409 Series 194 BKB38-094K Series . 69

BFP3104-12 193 BFV494 Series 194 BKC100 . . . . . . . . . . . 59
BFV22 184,185 BFV501 Series 188 BKC200 . . . . . . . . . . . 59
BFV22A 184,185 BFV532 197 BKCC . . . . . . . . . . . . . 60
BFV22H17/8 184 BFV557 195 BKF100-4 . . . . . . . . . . 61

BFV22I 188 BFV558 198 BKF100-6 ......... . 61

BFV22SH 184 BFV650 199 BKH-094 Series . . . 64
BFV42 186,187 BFV655 Series 190 BKH-094K Series . . 64
BFV42A 186,187 BFV751-1/2 192 BKL-063 Series . . . . 63
BFV42H17/8 186 BFV751-3/8 192 BKL-063K Series . . 63

BFV42SH 186 BFV751-5/8 192 BKL-094 Series ... . 63

BFV100 191 BFV751J-1/2 192 BKL-094K Series . . 63
BFV101 . . . . . . . . . . . 198 BFV751J-3/8 . . . . . . 192 BKP10063 . . . . . . . . . 60
BFV103 . . . . . . . . . . . 198 BFV751J-5/8 . . . . . . 192 BKP10094 . . . . . . . . . 60
BFV104 . . . . . . . . . . . 198 BFV755-1/2 . . . . . . . 193 BKP20125 . . . . . . . . . 60

BFV118 . . . . . . . . . . . 198 BFV755-3/8 193 BKP20188 . . . . . . . . . 60

BFV129 . . . . . . . . . . . 185 BFV2008 . . . . . . . . . 191 BKT-063 Series 66
BFV132 . . . . . . . . . . . 196 BFV2009 . . . . . . . . . 191 BKT-063K Series . . 66
BFV133 . . . . . . . . . . . 196 BFV2010 . . . . . . . . . 191 BKW063 59
BFV135 . . . . . . . . . . . 197 BFV2011 . . . . . . . . . 191 BKW094 59
BFV136 . . . . . . . . . . . 197 BFV2012 ......... 191 BKW125 59
BFV140 . . . . . . . . . . . 196 BFV2013 ......... 191 BKW188 59
BFV141 . . . . . . . . . . . 195 BFV2014 ......... 191 BKYH18-094 64
BFV142 . . . . . . . . . . . 197 BFV2015 . . . . . . . . . 191 BKYH18-094 Series . 65
BFV143 . . . . . . . . . . . 196 BFV2016 . . . . . . . . . 191 BKYH18-094K Series 65
BFV200 . . . . . . . . . . . 191 BFV2017 ......... 191 BKYH30-094 64
BFV201 . . . . . . . . . . . 195 BFV3104 -1 thru 6 193 BKYH30-094 Series . 65
BFV202 . . . . . . . . . . . 195 BFV3104-8 193 BKYH30-094K Series 65
BFV-223 189 BFV3104-10 193 BKYT12-063 66
BFV-223WO 189 BFV3104-12 193 BKYT12-063 Series . 67
BFV-224 189 BFVATR Series ... 190 BKYT12-063K Series 67
BFV-224WO 189 BFVATRHN Series 190 BKYT18-063 66
BFV-225 189 BFVFW Series 190 BKYT18-063 Series . 67
BFV-225WO 189 BFVHHCS Series . 189 BKYT18-063K Series 67
BFV-228 189 BFVHN Series 189 BKYT30-063 66
BFV-228WO 189 BFVSL Series 190 BKYT30-063 Series . 67
BFV280SQ 199 BHR1225ZN 58 BKYT30-063K Series 67
BFV281SQ 199 BHR1238ZN 58 BL1400 Series 142
BFV300 191 BHR1250ZN 58 BMM-3 203
Index BFV334 197 BHR1262ZN 58 BMM-3L 203

Strut Systems 247

BMM-3S 203
BMM-4 203
BMM-4L 203
BMM-4S 203
BMM-5 203

BMM-5L 203
BMM-5S 203
BMM-6 203
BMM-6L 203
BMM-6S 203
BMS-6 46
BMS-6L 47
BMS-6M 47
BMS-6S 47
BMS-8 46
BMS-8L 47
BMS-8M 47
BMS-8S ........... 47
BMS-10 . . . . . . . . . . . 46
BMS-10L . . . . . . . . . . 47

BMS-10M 47
BMS-10S 47
BMS-12 46
BMS-12M 47
BMS-12S 47
BMS-D-12 46
BMS-D-12L 47
BMS-D-12M 47
BMT-6 48
BMT-8 48
BMT-10 48
BMT-12 48
BMT-D-12 48
BP081SS . . . . . . . . . 133
BP110SS . . . . . . . . . 133

BP135SS ......... 133

BP175SS ......... 133
BP205SS ......... 133
BP250SS . . . . . . . . . 133
BP300SS . . . . . . . . . 133

BP325SS ......... 133

BP375SS ......... 133
BP425SS ......... 133
BP475SS . . . . . . . . . 133
BPC Series 127
 BTS22TH 38,39 LW Series 56 N575 47
BVP Series 135 MSQN Series 55 N575WO 46
BVS-12 137 N221 47 N621 203
BVS-120 137 N221WO 46 N621WO 203
BVT Series 134 N222 47 N622 203
CLDP10 155 N222WO 46 N622WO 203
CNPSS Series 53 N223 47 N624 203
DB DS Series 156,157 N223WO 46 N624WO 203
DB5 153 N224 47 N627 203
DB10 153 N224SS6 179,181 N627WO 203
DB10-28 154 N224WO 46 N721 47
DB10-36 154 N224WOSS6 . 178,181 N722 47
DB10-42 154 N225 47 N723 47
DB10-50 154 N225SS6 179,181 N724 47
DB10-60 154 N225WO 46 N724SS6 179
DB20 153 N225WOSS6 . 179,181 N725 47
DB30 153 N226 47 N725SS6 179
DB40 153 N226WO 46 N726 47
DB48 153 N227 47 N727 47
DB610 153 N227WO 46 N728 47
DB620 153 N228 47 N728SS6 179
DB630 153 N228SS6 179,181 N755 47
DB640 153 N228WO 46 N775 47
DB648 153 N228WOSS6 . 179,181 N778 47
DBE10-8 155 N255 47 N2500 Series 217
DBE10-12 155 N255WO 46 N7221 203
DBE10-16 155 N275 47 N7222 203
DBM 153 N275WO 46 N7224 203
DBM- Series . . . 154 N278 47 N7227 203
DBM- CT Series 154 N278WO 46 NW524 49
DBP 153 N521 47 NW525 49
DBR10-12 155 N522 47 NW528 49
DBR2-31/2 158 N523 47 NWM6 49
DBR4-6 158 N524 47 NWM8 49
DBR8-10 158 N524SS6 179,181 NWM10 49
DBR12-14 158 N525 47 NWM12 49
DBR16-20 158 N525SS6 179,181 SA101 227
DCN 3/8 52 N525WO 46 SA102 227
FFW Series 56 N525WOSS6 179 SA110 227
FW Series 56 N526 47 SA131 227
HHCS Series 53 N527 47 SA154 227
HN Series 55 N528 47 SA155 227
IPH Series 136 N528SS6 179,181 SA158 223-226
IPH18230 136 N555 47 SA276 223-226
ISO 137 N555WO 46 SA318 223-226
 Index

248
SC228 57
SC-UB 57
SFHMS Series 53
SHHMS Series 53
SLWN1/4 56
SLWN1/2 56
SLWN3/8 56
SLWN5/8 56
SLWNM6 56
SLWNM8 56
SLWNM10 56
SLWNM12 56
SN224 Series 49
SN224WO Series . . 48
SN225 Series 49
SN225WO Series .. 48
SN228 Series 49
SN228WO Series .. 48
SN524 Series 49
SN525 Series 49
SN525WO Series .. 48
SN528 Series 49
SN724 Series 49
SN725 Series 49
SN728 Series 49
SQN Series 55
SRHMS Series 53
STN224 Series 48
STN225 Series 48
STN228 Series 48
STN525 Series 48
TN221 48
TN222 48
TN223 48
TN224 48
TN225 48
TN226 48
TN227 48
TN228 48
TN255 48
TN525 48
Strut Systems
Strut Systems
249
 250
B-Line reserves the right to make changes to the specifications, materials, equipment, prices, or the availability of pro
notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time o
responsibility
for inaccuracies resulting from undetected errors or omissions.
Strut Systems
U.S. Customer Service Center is staffed Monday through Friday
from 7 a.m. to 5:00 p.m. Central Standard Time.
Eaton’s B-Line Business Eaton’s B-Line BusinessUnited States

Eaton’s B-Line Business Eaton’s B-Line BusinessCanada

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122 United States Eaton.com

B-Line Business509 West Monroe Street Highland, IL 62249Phone: 800-851-7415Fax: 618-654-1

 Strut Systems

ices, or the availability of products at any time without prior

d in this catalog at the time of publication, we cannot accept

ors or omissions.

Friday

essUnited States United Kingdom509 West Monroe Street Walrow Industrial EstateHighland, IL 62249

essCanada Middle East5925 McLaughlin Road PO Box 70160 - Al Khobar - 31952Mississauga, ON L

one: 800-851-7415Fax: 618-654-1917www.bline.com© 2013 EatonAll Rights Reserved Eaton is a registered trademark Printed in US