V5329A,C

FLANGED LINEAR VALVE PN6/16

PRODUCT DATA

FEATURES
 Cast iron body with flanged end connections
 Metal-to-metal seating for long life span
 Self adjusting packing
 Accurate positioning to ensure state-of-the-art
temperature control
 Direct-coupled electric and pneumatic actuators for
easy mounting
 Constant total flow throughout full plug travel

SPECIFICATIONS
Action Stem up to close port A-AB
Nominal pressure rating V5329A - PN16
V5329C - PN6
Flow characteristic Equal percentage port A-AB,
linear port B-AB
Rangeability 50:1
Leakage rate 0.5 % of kVS port A-AB
1 % of kVS port B-AB
Stroke 20 mm
Valve body
APPLICATION End connections
Material
Flanged per ISO 7005-2
Cast iron (GG25)
These three-port mixing valves are used for modulating con- Dimensions See Fig. 1
trol of hot or chilled water in heating, ventilation, and air con-
ditioning systems and can be operated by electric linear Trim
actuators as ML6420/6425, ML7420/7425, and ML6421/7421 Seat Body integrated
or by pneumatic actuators MP953. Plug Stainless steel, skirt-guided
Stem Stainless steel
Packing Spring-loaded PTFE cone rings
Medium temperature
and max. pressure
PN16 2 ... 120 °C; 1600 kPa
120 ... 150 °C; 1440 kPa
150 ... 170 °C; 1370 kPa
PN6 2 ... 120 °C; 600 kPa
120 ... 150 °C; 540 kPa
150 ... 170 °C; 510 kPa
Maximum temperature
differential in alternating
hot/cold water use 60 K

® U.S. Registered Trademark EN0B-0703GE51 R0217

Copyright © 2017 Honeywell Inc. All Rights Reserved.
V5329A,C FLANGED LINEAR VALVE PN6/16 – PRODUCT DATA

SIZES AND FLOW CAPACITIES INSTALLATION

order number valve size kVS  Water should meet VDI 2035 requirements.
 Do not install valve with stem below the horizontal.
V5329A1004 DN15 2.5
 Fluid flow must correspond with the arrow direction on the
V5329A1012 DN15 4.0
valve body.
V5329A1020 DN20 6.3
 The installation of a strainer is strongly recommended.
V5329A1038 DN25 10.0
V5329A1046 DN32 16.0
REPAIR PACKING KIT
V5329A1053 DN40 25.0 Part No.: R43176754001 (DN15…32)
V5329A1061 DN50 40.0 R43176754002 (DN40…80)
V5329A1079 DN65 63.0
V5329A1087 DN80 100.0
V5329C1000 DN15 2.5
V5329C1018 DN15 4.0
V5329C1026 DN20 6.3
V5329C1034 DN25 10.0
V5329C1042 DN32 16.0
V5329C1059 DN40 25.0
V5329C1067 DN50 40.0
V5329C1075 DN65 63.0
V5329C1083 DN80 100.0

CLOSE OFF PRESSURE RATINGS IN kPa

Pneumatic Actuators
actuator actuator air closed valve size
size posi-
model spring pressure valve
(in) dir. rev. tioner DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80
MP953 range in actuator seat

A5005, 27-76 kPa yes 150 150 150 90 40

5 x - - -
C5027 (4-11 psi) no 370 370 370 240 130

55-83 kPa 500 500 500 330 190

C5019 5 x no - - -
(8-12 psi) 200 200 200 120 60

14-48 kPa upper 3402) 3402) 3402) 220 120 50

C5068 8 x no - -
(2-7 psi) lower 16002) 16002) 16002) 16001) 10001) 600

A5039, 27-76 kPa 0 kPa yes 9802) 9802) 9802) 6002) 360 200 120 70
8 x
C5084 (4-11 psi) 115 kPa no 14002) 14002) 14002) 9202) 570 320 200 120

55-83 kPa 16002) 16002) 16002) 13002) 8502) 480 300 190
C5076 8 x no
(8-12 psi) 10002) 10002) 10002) 7302) 4402) 240 150 90

27-76 kPa 480 480 480 320 180 90 50 20

D5025 7 x no
(4-11 psi) 7901) 7901) 7901) 540 320 170 100 60
lower
B5003, 55-90 kPa yes upper 12001) 12001) 12001) 8301) 510 280 170 100
7 x
D5009 (8-13 psi) no 600 600 600 410 240 120 70 40
1)
For V5329C, maximum 600 kPa
2)
For V5329A, only

EN0B-0703GE51 R0217 2
 V5329A,C FLANGED LINEAR VALVE PN6/16 – PRODUCT DATA

Electric Actuators
actuator valve size
model force DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80
ML6420A, ML6425A,B
ML7420A, ML7425A,B 600 N 10001) 10001) 10001) 7901) 480 260 160 100
ML6421A, ML7421A 1800 N - - - 10001) 10001) 10001) 6501) 400
1)
For V5329C, maximum 600 kPa

DIMENSIONS (mm)
Valve
100%

90%

80%
STROKE

Y2
70%
Y1,2

AB
Y1

FLOW RATE
60%

50%
Without stem With stem

B
extension for extension for 40%

-A
ML6420/25 MP953A,C 8”

B
B ML7420/25
M6421, M7421 30%
MP953A,C 5”
MP953B,D
20%
A AB
10% A-AB
B
C 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90%100%
STROKE
A Fig. 2. Characteristic curve of V5329A,C
Fig. 1. V5329A,C
Table 1. Dimensions, V5329A,C (in mm)
valve Y1 Y2
A B C
size stem up
DN15 130 90
63
DN20 150 95
DN25 160 100
107 151
DN32 180 80 105 port port
DN40 200 115 A-AB A-AB
closed closed
DN50 230 94 125
DN65 290 105 145
DN80 310 112 155

3 EN0B-0703GE51 R0217
V5329A,C FLANGED LINEAR VALVE PN6/16 – PRODUCT DATA

Pneumatic Actuators Electric Actuators

H K H 135x(161)
E E
67.4

135x(161)

67.4

364 (with High-Temperature Kit: 444 mm)

70

322 (with High-Temperature Kit: 402 mm)

F F
0

50 G
100
G

284
100

242
50

233
0

100 0 100 0

192
MP953A,C MP953B,D 0 100 0 100

141
Fig. 3. MP953A,B,C,D

model E F G H K
MP953A 5“ 192 - Fig. 4. ML6420A/6425A,B ML7420A/7425A,B
130 120
MP953C 5“ - 120
-
MP953A 8“ 237 -
210 140
MP953C 8“ - 165 178x (178)
64
MP953B 242 -
180 120 107
MP953D - 137

360
264
239
additional
knock-out for

142
cable fitting:
18.9 (PG11)

Fig. 5. ML6421A, ML7421A

Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative:

Home and Building Technologies

Honeywell GmbH
Böblinger Strasse 17
71101 Schönaich / Germany
Phone: (49) 7031 63701
Fax: (49) 7031 637493
http://ecc.emea.honeywell.com
Subject to change without notice. Printed in Germany

EN0B-0703GE51 R0217