Baphomet

Lord of Darkness
Lord of Darkness
Amigurumi pattern
by Lady Artemisa.

@_ladyartemisa_

@_ladyartemisa_ 01
 Difficulty:
Intermediate - Advanced.

Measure:
Using the yarn thickness and crochet hook mentioned below,
the amigurumi would measure 28 cm in height.

Materials:
Yarn 2.5 mm. thick.
Crochet hook 4 mm.
Stuffing material.
20 mm. Safety eyes.
Accessories such as chains, rings, studs.
Metal brush for combing yarn.

Abbreviations (US)
M.R: Magic Ring. 1 Inc4: 4 stitches in the same
s.c: Single crochet. loop.
ch: Chain. 1 Inc3: 3 stitches in the same
Inc: Increase. loop.
Dec: Decrease. 1 Dec3: Decrease by working
BLO: Back Loop Only over 3 stitches.

@_ladyartemisa_ 04
 Notes:
- Asterisks (*) indicate that the sequence within will be
repeated, the specified number of times: x2; x3; x4; etc
- If some stitches are in parentheses, it means that everything
that is inside will be crocheted in the same stitch. For
example: (2 sc; ch 1; 2 sc) this means that within the same
stitch we will make 2 single crochets, a chain and another
2 single crochets).
- The number in parentheses at the end of a row indicates the
stitches that should remain in total on the entire row.
- When a row indicates two numbers at the beginning, it means
that the same will be crocheted from the row of the first
number to the second, inclusive. (Example 2-9) 28 sc)
- It is recommended to crochet closing each round with a
slip stitch and going up with a chain to the next row. Unless
otherwise stated.

@_ladyartemisa_ 05
 Head:
Main color:
1) 6 s.c. in a M.R. (6)
2) 6 inc. (12)
3) *1 s.c; 1 inc*x6 (18)
4) 1 s.c; 1 inc; *2 s.c; 1 inc*x5; 1 s.c. (24)
5) *3 s.c; 1 inc*x6 (30)
6) 2 s.c; 1 inc; *4 s.c; 1 inc*x5; 2 s.c. (36)
7) *5 s.c; 1 inc*x6 (42)
8) 3 s.c; 1 inc; *6 s.c; 1 inc*x5; 3 s.c. (48)
9) 48 s.c.
10) *7 s.c; 1 inc*x6 (54)
11-16) 54 s.c.
17) 15 s.c; *1 inc; 1 s.c.*x3; 1 inc; 10 s.c;
*1 inc; 1 s.c*x3; 1 inc; 15 s.c. (62)
18) 16 s.c; *1 inc; 2 s.c*x3; 1 inc; 10 s.c.;
*1 inc; 2 s.c*x3; 1 inc; 16 s.c. (70)
19) 70 s.c.
20) 16 s.c; *1 dec; 2 s.c*x3; 1 dec; 10 s.c.;
*1 dec; 2 s.c*x3; 1 dec; 16 s.c. (70)
21) 15 s.c.; *1 dec; 1 s.c.*x3; 1 dec; 10 s.c;
*1 dec; 1 s.c*x3; 1 dec; 15 s.c. (54)
22) *4 s.c; 1 dec*x9 (45)
23) *3 s.c; 1 dec*x9 (36)
24) *2 s.c; 1 dec*x9 (27)
25) *1 s.c; 1 dec*x9 (18)
26) 9 dec. (9)

@_ladyartemisa_ 06
 Safety eyes:
The 20 mm safety eyes will be placed
between rows 16 and 17 with a spacing
of 12 stitches.

Keep in mind!
Do you remember that in row 17 we
crocheted ' 1 inc; 1 sc. x3 ' ? Place the
eyes over the 3rd inc. on each side.

Eyelids:
Main color:
Do 7 chains (6 as the base and 1
to start the first row)
1) 5 s.c; 1 inc; 4 s.c; 1 s.c on the other
side of the 1st chain. (12)

@_ladyartemisa_ 07
 Snout:
Main color:
Do 10 chains (9 as the base and 1
to start the first row)
1) 1 inc; 7 s.c.; 1 Inc4; 7 s.c;
1 inc.(At the same stitch where the first increase is made)(22)
2) 1 s.c; 1 inc3; 3 s.c; 1 inc; 3 s.c; 1 inc3; 2 s.c; 1 inc3;
2 s.c; 1 dec3; 2 s.c; 1 inc3; 1 s.c. (29)
3)*1 s.c; 1 inc*x2; 3 s.c; 2 inc; 3 s.c; *1 inc; 1 s.c*x2; 1 s.c;
1 inc; 2 s.c; 1 dec; 1 s.c; 1 dec; 2 s.c; 1 inc; 1 s.c. (35)
4-5) 35 s.c.
6) 1 s.c; 1 dec; 7 s.c; 1 dec; 7 s.c: 1 dec; 1 s.c; 1 dec;
9 s.c; 1 dec. (30)

@_ladyartemisa_ 08
 Mouth:
Main color:
1) 6 s.c. in a M.R. (6)
2) 6 inc. (12)
3) *1 s.c; 1 inc*x6 (18)

- Fold the circle in half and sew, joining the ends, as shown
in the picture:

Horns:
Secondary color:
1) 4 s.c. in a M.R.
2) *1 s.c.; 1 inc*x2 (6)
3) 6 s.c.
4) *2 s.c.; 1 inc*x2 (8)
5) *3 s.c.; 1 inc*x2 (10)
6) 10 s.c.

@_ladyartemisa_ 09
 7) *4 s.c; 1 inc*x2 (12)
8) 12 s.c.
9) 1 inc; 1 s.c; 1 inc; 6 s.c; 1 inc;
1 s.c; 1 inc (16)
10) *1 s.c; 1 inc*x2; 8 s.c;
*1 inc; 1 s.c*x2 (20)
11) 1 inc; 1 s.c; 1 inc; 4 s.c; 1 dec;
2 s.c; 1 dec; 4 s.c; 1 inc; 1 s.c; 1 inc. (22)
12) 2 s.c, 1 inc; 16 s.c; 1 inc; 2 s.c. (24)
13) 24 s.c.
14) 2 s.c; 1 inc; 6 s.c; 1 dec; 2 s.c; 1 dec; 6 s.c; 1 inc; 2 s.c. (24)
15) 24 s.c.
16) 2 s.c; 1 inc; 6 s.c; 1 dec; 2 s.c; 1 dec; 6 s.c; 1 inc; 2 s.c. (24)
17) 24 s.c
18) 1 s.c; 2 dec; *2 s.c; 1 inc*x4; 2 s.c; 2 dec; 1 s.c (24)

Cheeks:
Main color:
1) 6 s.c. in a M.R
2) 6 inc. (12)
3) *1 s.c; 1 inc*x6 (18)
4) *1 s.c; 1 inc*x2; 10 s.c; *1 inc; 1 s.c*x2 (22)
5) 1 inc; 1 s.c; 1 inc; 5 s.c; 1 dec; 2 s.c; 1 dec;
5 s.c; 1 inc; 1 s.c; 1 inc. (24)

@_ladyartemisa_ 10
 Ears:
Main color:
1) 4 s.c. in a M.R (4)
2) *1 s.c; 1 inc*x2 (6)
3) *1 s.c; 1 inc*x3 (9)
4) *2 s.c; 1 inc*x3 (12)
5) *3 s.c; 1 inc*x3 (15)
6) 2 s.c; 1 inc; *4 s.c;1 inc*x2; 2 s.c.(18)
7) 18 s.c.
8) 2 s.c; 1 dec; *4 s.c;1 dec*x2; 2 s.c. (15)
- To finish shaping the ear, connect 3 stitches on each side.
Then, make a small fold at the tip without sewing and finish
closing. Keep in mind that for the other ear you must follow
the same procedure but on the other side.

@_ladyartemisa_ 11
 Legs:
Start with the hooves:
Secondary color:
1) 6 s.c. in a M.R.
2) 6 inc. (12)
3) *1 s.c; 1 inc*x6 (18)
4) 7 s.c; 4 inc.; 7 s.c (22)
5) In BLO: 22 s.c.
6) 8 s.c; 1 dec; 2 s.c; 1 dec; 8 s.c. (20)
7) 6 s.c ;1 dec ;4 s.c; 1 dec; 6 s.c. (18)
8) 18 s.c.
*Cut the yarn.
*Start with the main color in the BLO (1 stitch before the end).
9) *2 s.c; 1 inc*x6 (24)
10) 24 s.c.
11) *2 s.c; 1 dec*x6(18)
12) *4 s.c; 1 dec*x3 (15)
13) *1 s.c; 1 inc*x7; 1 s.c. (22)
*Next, it will vary for the
left and right leg:
- Left:
14) 11 s.c;*1 inc; 1 s.c*x5; 1 inc. (28)
15-16) 28 s.c.
*Cut the yarn*
- Right:
14) *1 inc; 1 s.c*x5; 1 inc; 11 s.c. (28)
15-16) 28 s.c.
*DON’T cut*

@_ladyartemisa_ 12
 Before proceeding with the union of the
2 legs to crochet the body, let's crochet
the details of the hooves. Positioning
ourselves again in row 8, in the middle
of the stitch that we did not use for the
'BLO,' we will crochet with the main color:
9) *2 s.c; 1 inc*x6

Body:
To make the body, we need to join the 2 legs, remembering
that the last one we crocheted is the right leg and we DON’T
cut the yarn:
17) 8 s.c. in the right leg; do 2 ch.; join with 1 s.c. (8 stitches before
closing the left leg); and crochet 27 s.c; 2 s.c. in the chains;
22 s.c. in the right leg. (60)
18) 60 s.c.
19) 8 s.c; 1 dec; 12 s.c; 2 dec; 12 s.c; 1 dec; 12 s.c; 2 dec; 4 s.c. (54)
20) 54 s.c.
21) 7 s.c; 1 dec; 11 s.c; 2 dec; 10 s.c; 1 dec; 10 s.c; 2 dec; 4 s.c. (48)
22) 48 s.c.
23) 7 s.c; 1 dec; 10 s.c; 2 dec; 8 s.c; 1 dec; 8 s.c; 2 dec; 3 s.c. (42)
Switch to a third color, which will be the same one we will
use for the arms:
24) In BLO: 42 s.c.

@_ladyartemisa_ 13
 25)*5 s.c; 1 dec*x6 (36)
26-27) 36 s.c.
28) *4 s.c; 1 dec*x6 (30)
29-30) 30 s.c.
31) *3 s.c; 1 dec*x6 (24)
32-34) 24 s.c.

To finish the body, we will go back to

row 23, where we left the middle of the
stitches where we did the 'BLO', and
crochet:
24) *1 s.c; 1 ch*x42

@_ladyartemisa_ 14
 Arms:
With the third color:
1) 6 s.c. in a M.R.
2) 6 inc. (12)
3) *2 s.c; 1 inc*x4 (16)
4-9) 16 s.c
10) *6 s.c; 1 dec*x2
(14) 11-12) 14 s.c
13) *5 s.c; 1 dec*x2 (12)
14-16) 12 s.c.

Finger:
With the third color:
1) 5 s.c. in a M.R.
2) 5 s.c.

Choker:
Color of your choice
(in my case, white):
Do 25 chains.
(24 as the base and 1
to start the first row)
1) 24 s.c.

@_ladyartemisa_ 15
Bracelets:
Color of your choice
(in my case, white):
Do 15 chains.

Tail:
Main color:
1) 6 s.c. in a M.R.
2-3) 6 s.c.
4) 1 inc; 5 s.c. (7)
5-10) 7 s.c.
11) 1 inc; 6 s.c. (8)
12-17) 8 s.c.
18) 1 inc; 7 s.c. (9)
19-24) 9 s.c.
25) 1 inc; 8 s.c. (10)
26-30) 10 s.c.

White of the eye:

With white:
Do 5 chains.

16
Assembly
All pieces are ready,
let's assemble our Baphomet!
-

17
1 Let's start assembling the head. First, I recommend making some
stitches on the sides of the eyes to sink them and give more depth.
If you're not sure how to do it, you can find several tutorials on
YouTube by searching 'How to Indent Amigurumi Eyes'.

2 Now let's sew the snout:

The top part will go under row 16 of the head, aligned with the center
of the eyes.
The bottom part goes under row 23 of the head.
It's important to ensure that the snout is positioned correctly; you
can guide yourself by aligning the center of the head (midway
between the eyes) with the 2 increases from row 3 of the snout.

@_ladyartemisa_ 18
3 Once the snout is sewn to the
head, let's make some stitches
from the center of it, downwards,
to add a touch of depth where the
mouth will be later.
1

4 We will place the mouth below the

gap we just created. Ensure that
the center of the magic ring of the
mouth aligns with the center of
the snout.

5 Let's sew the cheeks:

The upper part of these goes under row 18 of the head.
The lower part goes under row 22.
It's important to sew them right next to the snout, with no gap
in between.

@_ladyartemisa_ 19
6 To embroider the star on the forehead, we need to mark 5 points with
pins.
The first one is right in the center between the eyes, 2 rows above
the snout. From that point, count 4 stitches on each side and 3 rows
up; there we will mark 2 more points, one on each side.
The last two points go, from the previous ones, 4 rows up and 1 point
inward.

7 To embroider the nose, we will mark 3 points:

The first one will mark the center of the
snout, just above its first row. (It should
coincide with the center of the mouth).
Then, we will mark 2 more points, each 4
stitches away from the center and above
the 4th row of the snout.

@_ladyartemisa_ 20
8 The eyelids can be sewn in different ways to
give another expression to our amigurumi.
But in this case, this is the way I did it.

9 I sewed the white part of the eye by aligning one end with the side
of the eye, and I inserted the other end underneath the eyelid.
Then, I made several stitches along the chains.

@_ladyartemisa_ 21
10 The horns should be sewn under row 4 of the head and above row 13.
There is a distance of 1 stitch on each side of the star and the horns.
Before finishing sewing, I advise leaving an opening to complete the
filling

11 The ears go under row 10 of the head and above row 17. The back part
of them is aligned with the horns and cheeks.

@_ladyartemisa_ 22
12 The body goes under row 24 of the head. Before finishing sewing,
leave an opening to complete the filling if necessary.

13 Let's create the hair detail on the tail.

To do this, cut several pieces of yarn
(in the color you have chosen for the
horns, for example) each about 14 cm.
long.

@_ladyartemisa_ 23
 Next, I'll show you some images
of how I place the yarn pieces at
the tip of the tail. Doing this in
3 rows should be enough.

Once all the 'hairs' are in place, we need to brush the yarn with a
metal brush until it looks like the last image. Finally, we can shape it
to our liking with scissors.

@_ladyartemisa_ 24
14 Sew the tail onto row 21 of the body, counting from the legs. Make
sure it is well centered.

15 I embroidered the nipples.

You can find this embroidery technique on YouTube as 'french knot
embroidery '.

16 In the next step, I embroidered a cross on its belly where the navel
would be.

@_ladyartemisa_ 25
17 I sewed the arms onto row 31 of the body, counting from the legs.
They go on the sides, practically aligned with the horns. Keep in mind
that the fingers should be facing forward.

18 As final details, I added the accessories.

I decorated the choker with circular studs.
I sewed the bracelets to the amigurumi's wrists.
And I placed rings and chains on the ears.

@_ladyartemisa_ 26
 Congratulations!
If you've made it this far, then your Baphomet is ready!
If you'd like, I'd be delighted to see your results.
You can follow me and tag me on my social media;
you can find them on page '03' of this document.

@_ladyartemisa_ 27