Setting Code Battery Sleep Time Settings Working Mode Communication Mode Bluetooth HID Mode

When you read the "Battery Display" barcode, you can view the When you read the setting code, you can set the sleep time of the Suitable for devices that support Bluetooth, such as mobile
The code scanner can set the appropriate function by reading one current battery information of the scanner. scanner. Synchronous Mode The wireless barcode scanner supports both wireless communica- phones, Pads, laptops, etc. After the connection is successful, you
or a group of special setting barcodes. The synchronous mode is the default working mode. When you tion and wired communication. When using a cable to connect to can use text input directly, which is equivalent to the virtual
scan the barcode, the barcode information is output at the same the scanner, it will automatically switch to wired communication. keyboard input method of the device.
Procedure time. It will not work when the device is disconnected. Wireless 2.4G Mode Bluetooth HID Pairing Settings
The following are the operation steps for the manual barcode Battery Display 1 Minute The wireless 2.4G mode is the default communication mode. It is Method 1: Read the "Bluetooth HID Mode" setting code, and
reading mode: Data Format suitable for devices connected to 2.4G wireless receivers and the scanner will default to connecting to the last paired
In the wireless 2.4G and wired USB working mode, the barcode Synchronous Mode supports text output directly, which is equal to using a USB Bluetooth.
1. Press and hold the barcode scanner’s trigger button until the
scanner supports direct output of Codepage or Unicode keyboard for input.
aiming line activates and a red aiming line appears. Storage Mode
Wireless 2.4G Mode Pairing Settings

Quick Start Guide

2. Align the red aiming line with the center of the barcode, then encoding. After reading the setting code, the scanner will switch to storage
5 Minutes
move the scanner and adjust the distance between it and the mode. After the user scans the barcode, the barcode information If the 2.4G wireless receiver is installed but not normally Bluetooth HID Mode
barcode to get the best reading distance. is stored in the storage memory of the scanner. connected, please follow the procedures below to configure it. Method 2:
3. The code reading is complete when the success prompt Method 1: Read the "Wireless 2.4G Mode" setting code when 1. Read the "one-key pairing" setting code, the scanner will
Codepage
Wireless Barcode Scanner sounds and the red lighting line disappears at the same time.
The barcode scanner transmits the decoded data to the host
the 2.4G receiver is plugged in, and the scanner will connect to
the last paired receiver by default.
enter the pairing state, and the green indicator light will flash
30 Minutes
Storage Mode
quickly.
[6A] Version: 1.7 device.
Read the "Upload All Data" setting code, and transmit all the
Unicode(UTF-8)
barcode information stored in the scanner to the host device.
Wireless 2.4G Mode
Sounding Settings
System Settings When you read the setting code, you can set the prompt sound of Method 2:
One-click Pairing

Never Sleep Note: Press and hold the button for 8 seconds, and then
Factory Default the scanner. 1. When you read the "One-click Pairing" setting code, the
release the button to enter the Bluetooth HID pairing state.
Read the “Wireless Factory Default” barcode, you can reset all the Upload All Data scanner will enter pairing mode and the green indicator light
But, you must first enable this function by reading the
properties of the scanner to the factory default state. Read the "Upload Total Data" setting code, and transmit the will flash quickly.
configuration code)
number of barcodes read by the scanner to the host device.
2. Turn on Bluetooth in the device and search for "Barcode
High Sleep Now Bluetooth HID".
Wireless Factory Default One-click Pairing 3. Click the "Barcode Bluetooth HID" Bluetooth device to enter
Version Upload Total Data 2. Insert the receiver and listen for a "beep" from the code the pairing state.
Read the “Version” barcode to view the current version information Read the "Clear All Data" setting code to clear all barcode informa- scanner to indicate that the connection and pairing are 4. When you hear a "beep" sound from the code scanner, it
of the scanner. tion that is saved in the scanner. successful. At this time, the green indication light will remain means the connection and pairing is successful. At this time,
Low
on. the green indicator light will remain on.
Note: When the scanner is in the pairing state, you can exit it by Note: When the scanner is in the pairing state, you can exit it
Version Clear All Data
double-clicking the button twice or waiting 1 minute for the by double-clicking the button twice or waiting 1 minute for
pairing timeout. the pairing timeout.
Due to the regular upgrades of systems and products, ZKTeco could not guarantee exact Disable
consistency between the actual product and the written information in this manual. -1- -2- -3- -4- -5- -6-
Long Press for 8 Seconds to Enter Bluetooth HID Search Bluetooth SPP/BLE Pairing Settings Optional Function 2. It is recommended to use a DC 5V 1A power adapter for
Long press for 8 seconds to start the Bluetooth HID search Step 1: After reading the "Bluetooth SPP Mode" or "Bluetooth charging (Figure B).
function, which helps speed up Bluetooth connections. BLE Mode" setting code, the green LED indicator will flash These functions require corresponding design of the hardware of
Add Tab (HT)
quickly. Italian the barcode scanner, otherwise the reading setting code will be After Barcode
invalid.
Vibration Setting(optional)
Enable
NONE When you read the setting code, you can turn on or off the
Bluetooth SPP Mode
vibration prompt of the scanner.
Japanese Current Time (Off )
Keyboard Language Settings
Disable 3. To avoid damaging the scanner, do not use a power adapter
Bluetooth HID Transmission Speed Setting Bluetooth BLE Mode Due to the different keyboard key layouts and symbols LED Indicator Description that is more than 5V 1A and do not use fast charging.
When using a Bluetooth HID connection, the scanner's Step 2: In the SPP or BLE transparent transmission software, corresponding to different national languages, the code scanner Enable
4. When the scanner is not in use, it is recommended to keep the
can be virtualized into the keyboard standards of different The green LED indicator flashes once, indicating that the scanner
transmission speed can be adjusted based on the host device's search for "Barcode Bluetooth SPP" or "Barcode Bluetooth SPP Portuguese battery power at 60% to 80%.
countries according to actual needs. The keyboard layout setting is successfully decoded.
response capability. If the content is corrupted or missing, slow BLE," then click pairing until you hear a beep sound, indicating 5. When the scanner is fully charged, please turn the charging
applicable to the HID communication interface mode, and the The green LED indicator stays on, indicating that the scanner
down. that the connection and pairing is successful, and the green power off.
default is "American English keyboard". successfully connected.
indicator light is always on Bright. Disable The red LED indicator stays on, indicating that the scanner is
British English
Clear Screen Count (Optional) charging.
Fast
Suffix Settings The green LED indicator flashes quickly, indicating that the
scanner is in the process of pairing and connecting.
When you read the setting code, you can add different suffix American English
functions.
Clear Screen Count
Medium
Brazilian Portuguese
Clear Screen Count (Optional)
Matters Needing Attention
1. It is recommended to use the computer USB 3.0 interface for
Add CR*
German charging (Figure A).
Low

Russian Current Time (On)

Add LF
ZKTeco Industrial Park, No. 32, Industrial Road,
Ultra Low French
Tangxia Town, Dongguan, China.

Phone : +86 769 - 82109991

Add CR+LF International Keyboard Before Barcode Fax : +86 755 - 89602394

www.zkteco.com
Spanish

-7- -8- -9- -10- -11- -12-

Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.