7th Asian Symposium on Materials and Processing

(ASMP 2024)
December 5-7, 2024
IC & SR Building, Indian Institute of Technology Madras, Chennai

Day 1 (5th Dec 2024)

08:00 – 09 00 ICSR IIT Madras Conference Registration
09:15 – 10.00 TTJ Auditorium Inaugural Session
EP 01 Prof. Yoshiharu. Mutoh, Nagaoka Univ. of Technology Japan
10.00 - 10:30 How Should We Understand the Fretting Fatigue Phenomena for the Purpose of Life and Strength Assessment?
10:30 – 11:00 Dining Hall Refreshments / Coffee Break
EP 02 Prof Jung Li Song, Changwon National Univ., South Korea
11:00 – 11:30 Advancing Sustainable Materials: The Evolution of Natural Fiber Polymer Composites………………………………………………………………………………………….
EP 03 Kunio Hayakawa, Shizouka Univ., Japan
11:30 - 12:00 Numerical Simulations for Designing Bulk Forming Processes
EP 04 Prof. Karunakaran KP, IIT Bombay, India
12:00 - 12:30 Electron Beam Hybrid Manufacturing
EP 05 Prof. Somrerk Chandra-Ambhorn, KMUTNB, Thailand
12:30 – 13:00 Progress on Ferritic Stainless Steel Development for Solid Oxide Fuel Cell Interconnect Application.
13:00 - 14:00 Dining Hall Lunch
ICSR Hall 2 ICSR Hall 3
EP 06 Prof. Angela Daniela La Rosa, NTNU Norway EP 09 Yasuhiro Yamazaki, Chiba Univ, Japan
14:00 – 14:30 LCA Applied to Materials and Processes Small Crack Propagation in a Single Crystal Ni-Based
Superalloy under Thermomechanical Fatigue Loading
EP 07 Prof. Kazunari Shinagawa, Kyushu Univ, Japan EP 10 Prof. Tomohiro Sato, Kansai Univ, Japan
Expert Lectures
14:30 – 15:00 Simulation of Liquid Phase Sintering by Combined Reduction of Cu-Ni-Si Alloy Powders made by Water
Session B MPFM/DEM Approach Atomization
EP 08 Prof. Gen Sasaki, Hiroshima Univ, Japan EP 11 Prof. Kazunori Asano, Kindai Univ, Japan
15:00 – 15:30 Thermal Expansion & Microstructure of Al Matrix Comp Damping Capacity of Short Alumina Fiber and VGCF
Prepared by Low-Pressure Infiltration to a Porous Body Hybrid Reinforced Aluminum Alloy Composites.
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
Session B1 Polymer & Composite Session B2: Modeling & Analysis Session B3: Damage Tolerance
C-01 K Sugio, Hiroshima Univ. Japan C-05 Marco a. Garcia-Revilla, Guanajuato Univ. C-09 Taiki Yamamoto, Ritsumeikan Univ, Japan
Contributory
15:30 - 15:45 Automatic Particle Detection of Al-SiC Particle Modeling Adsorption and Optical Properties for the Design of Development of New Techniques for High-Temperature
Presentations Dispersed Composites by Machine Learning CO2 Photocatalytic Metal-Organic Framework Fatigue Testing Machines using Miniature Specimens
 C-02 B Sahu, IIT Madras, India C-06 G V Balakrishna, IIT Madras, India C-10 Shun Takamura, Waseda Univ. Japan
15:45 – 16:00 Patch Size Study on GFRP Laminate under Flexural Identification of Grease Formulation using Fourier Transform Investigation of Densification Treatment Method for CNT
Loading Infrared Spectroscopy: Application of Artificial Intelligence Yarns Using Molecular Calculations
C-03 Pramod K Parida, IIT BBSR, India C-07 Nan Zhang, Nagaoka UT, Japan C-11 Praveen Kumar, IIT Bombay, India
Influence of Fumed Silica Nanofiller and Stacking Fatigue Strength and Corrosion Behavior under Humidity in Analysis of Flow and Fracture Behavior of Cu as a Function
16:00 - 16:15 Sequence on Solid Particle Erosion Response of Self-Pierce Riveting Joint of Non-Combustible Mg-4%Al- of Temp & Strain Rate Before and after Gaseous Charging
Bidirectional Jute-Kevlar Hybrid Composite 1%Ca-0.2%Mn Alloy
C-04 Hayato Nakatani, Osaka Metropol. Univ, Japan C-08 Soma Maji, IIT Madras, India C-12 Katsunari Takeuchi, Nagaoka UT, Japan
16:15 -16:30 Pseudo-Ductility Design for CFRP Laminates Based on Simulation of Heat Transfer and Microstructural Evolution Factors Affecting Fatigue Strength Characteristic in Friction
Microscopic Damage Accumulation by Mesh Interlayers During Additive Manufacturing of Inconel 625 Stir Welded Aluminum Alloy Lap Joints.
16:30 – 16:45 Refreshments / Coffee Break
16:45 – 17:45 Poster Session - 1
 Day 2 (6th Dec 2024)
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
EP-12 Prof. Miyashita, Nagaoka UT, Japan Japan EP-14 Prof Noel, Université De Poitiers, France EP-16 Prof. Geetha Manivasagam, VIT Vellore
Fatigue Strength of MIG and TIG Welds in Non- Friction Regimes of Resin-Lubricated Carbon Fiber Tows 3D Printing of Orthopedic Metallic Implants with High-
09:00 – 09:30 Combustible Magnesium Alloy under Plane Bending Load Performance
Expert Lecture at Negative Stress Ratios
Session C EP-15 Prof. Chau Chang Chou NTOU, Taiwan EP-17 Prof. Shanmugam Kumar, Univ of Glasgow, UK
EP-13 Prof. Balasubramanian K , DIAT, Pune, India
Tribological Behavior of SKD11 Tool Steel and 5052 Al Sustainable Multifunctional Materials and Composites Via
09:30 - 10:00 Biomaterials Breakthroughs: Expanding Applications
Alloy in Reciprocal Line-Contact Motion: Effect of WS2- Additive Manufacturing and Nanoengineering
in Science and Technology
Suspended Minimum Quantity Lubrication
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
Session C1: Surface Design and Analysis Session C2: Welding & Joining Session C3: Additive Manufacturing
C-13 Darshan Dange, IIT Madras, India C-17 Rattana B, Suranaree Univ. of Tech., Thailand C-21 Nitin Kumar, IIT Madras, India
10:00 – 10:15 Scratch Resistance Behavior of the Coir-Pith PLA Dissimilar Welding of Low-Carbon Steel and Mg Alloy Influence of Pre-Weld Solution Treatment on HAZ Liquation
Composite for Automotive Interior Application in Additively Manufactured Inconel 718
C-14 Ketan Rajendra Patil, Nagaoka UT, Japan C-18 Yoshiki Watanabe, Osaka Inst of Tech. Japan C-22 Arvind Kumar, IIT Jammu, India
10:15 – 10:30 Rolling Contact Fatigue Mechanism in AM Maraging Effects of Al Welds Characteristics on Joint Strength in Innovative Additive Manufactured Pressure Sensors: Design
Steel Cu/Al Dissimilar Materials Resistance Spot Welding and Simulation for Health Applications
Contributory
C-15 Sumanta Prasad Dewri, IIT Madras, India C-19 Ramesh Babu Arigela, NIT Trichy, India C-23 Shinobu Narita, Shizuoka Univ. Japan
Presentations
10:30 – 10:45 Sliding Friction of Coir Fiber in Dry and Wet Conditions Feasibility Study of Activated GTAW in STBW Machine Evaluation of the Effect of Forming Condition on the Strength of
for Welding of SA210-Gr.C Tubes Formed Part by PBF Type Additive Manufacturing
C-16 Chandramouli T V, NIT Karnataka, India C-20 Arata Ishikawa, Osaka Inst of Tech, Japan C-24 Avinash Mohan M, IIT Madras, India
Tribological Performance of Fe-Based Composite Coatings Effects of External Magnetic Field on Nugget Formation Microstructural Characteristics of Additively Manufactured
10:45 – 11:00 under Elevated Temperature Conditions and Electrode Wear of Resistance Spot Welding for Al Alf357 Alloy: Effect of Tensile Loading and Build Orientations
Alloy
11:00 – 11:15 Refreshments / Coffee Break
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
EP-18 Prof. Takahiro Ohashi, Kokushikan Univ. Japan EP 20 Prof. Takenobu Sakai, Saitama Univ. Japan
Dissimilar Materials Joining of a Space Steel Sheet with Evaluation of Mechanical Properties on CFRP Adhesive Joints
11:15 – 11:45 a Prepared Stamping Hole with an Inside Chamfer to an
Expert Lecture A5083 Al Alloy Sheet via Friction Stir Forming
Session D
EP 19 Prof. S Hashimura, Shibaura Inst of Tech, Japan EP-21 Dr. Poonam Kumari, IIT Guwahati, India
11:45 – 12:15 Clamp Force Reduction on Thin Plates Bolted Joint Fabrication and Characterization of 2-Layered PZT-Zro2 Discs
Through Cold Isostatic Pressing for Improved Life
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
Session D1: Thin Film and Coating Session D2: Surface Design and Analysis Session D3: Polymer & Composite
C-25 Chithambaram K, IIT Madras, India C-28 S Manova Raja Singh, Hiroshima Univ. Japan C-31 Taisho Fukui, Nagoya Univ. Japan
Contributory
12:15 – 12:30 Scratch Resistance of PLA-Based Biodegradable Polymer Controlling the Wettability Behavior of Zn Alloy on High-Throughput Measurement of Transition Temperatures of
Presentation Reinforced with Pineapple Leaf Fiber SUS310S Steel by Application of Ultrasound Thermoresponsive Polymers
 C-26 Neeraj CS, IIT Madras, India C-29 Pream Kumar AL, IIT Madras, India C-32 N B Keerthika, IIT Madras, India
12:30 – 12:45 Dual Dye Based Light and Thermal Responsive Liquid Coir Yarn Friction in Technical Textiles – a New Tensile Characteristics of 3D Printed Flexible Polybutylene
Crystal Polymer Films Methodology for Assessment Succinate (PBS) / Coir Composite
C-27 Tejasva Vashistha, IIT Gandhinagar, India C-30 Yuya Omiya, Kagawa Univ. Japan C-33 Kazuhito Asai, National Inst of Tech, Japan
12:45 – 13:00 Unveiling Structure-Property Links in Sio2-Cr-Au Thin Contact Behavior of Friction Joint using Wedge Structure Forming of Plate with Pin by Plane Strain Compression
Films Via Molecular Dynamics
13:00 – 14:00 Lunch
14:00 -15:00 Poster Session – 2
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
Session E2: Surface Design and Analysis Session E3: Additive Manufacturing
EP-22 Prof. Masaaki Otsu, Univ. of Fukui, Japan EP-24 Prof. Senthilvelan, IIT Guwahati, India
15:00 – 15:30 Incremental Forming of PMMA Sheets by Oil Bath Kalvam (Grinding in Traditional Medicine
Expert Lecture Heating Y Manufacturing)Engg. Insight
Session E EP 23 Dr. Zainuddin Sajuri, Univ. Kebangsaan, MYS EP 25 Dr. Dhanalaskmi, CVRDE, India
15:30 – 16:00 Effect of friction stir spot welding parameters on lap shear Secondary Processing of Aluminium Matrix Components -
strength of similar and dissimilar Al alloys. Challenges & Applications
16:00 – 16:15 Refreshments / Coffee Break
ICSR Hall 1 ICSR Hall 2 ICSR Hall 3
Session E1: Additive Manufacturing Session E2: Surface Design and Analysis Session E3: Welding and Joining
C-34 Shakti S Choudhury, IIT Madras, India C-39 Muluken Yehualaw, IIT Madras, India C-44 Hino Taichi, Nagoya Univ. Japan
16:15 – 16:30 Methodology for Manufacturing FGM With DEM- Fretting Characteristics of 3d Printed Polyphenylene Evaluation of Irradiation Characteristics of FAB Source With
Assisted Simulation of Powder Spreading in LPBF Sulfide (PPS) Insulation Shields – Layer Orientation Potential Distribution Control Electrode
C-35 P. Parameswaran, IIT Madras, India C-40 Yae Hasegawa, Shibaura Inst of Tech, Japan C-45 Bindu Pal, IIT Madras, India
16:30 – 16:45 A Study on Failure Mechanisms in Additively Effect of Cylindrical Tube Geometry on the Corrosion Effect of Double Pulsing on the Fatigue Behavior of Resistance
Manufactured Dumbbell Lattice Structures of Ti6Al4V Behavior of ZM21 Magnesium Alloy in a Flow Field Spot Welded Boron Steel
C-36 Arunangshu Das, NIT Trichy, India C-41 Ryo Matsumoto, Osaka Univ. Japan C-46 Muneyoshi Iyota, Osaka Inst of Tech, Japan
Integration of Nanomaterials in the 3D Printing Process Reduction in Barreling of the Hollow Cylinder by Ram Improvement in Joint Strength of Fe/Al Dissimilar Materials
16:45 – 17:00 Contributory
for Enhanced Mechanical and Functional Properties Pulsation in Upsetting Resistance Spot Welded Joints by using External Magnetic
Presentations Field
C-37 Dinesh Kumar A,IIT Madras, India C-42 Dinesh K S, IIITDM Kanchipuram, India C-47 Rahul Srivastava, IIT Madras, India
Influence of Build Orientation on AM PVDF With Fast Fabrication of Titanium Self-Cleaning Surfaces Insights Into the Bonding Characteristics and Bendability of
17:00 – 17:15 Electric Poling for Strain Sensing & Energy Harvesting using Laser Surface Texturing for Surgical Tools Al/Mg/Al Tri-Layered Multi-Metallic Clad Sheets
Apps
C-38 Vijeesh Vijayan, NMAMIT Mumbai, India C-43 Shubhang Srivastava, IIT Madras, India C-48 Saravana Bavan, Dayananda Sagar Univ. India
17:15 – 17:30 Fabrication of Martensitic Stainless Steel using Twin Analysis of Tribological Data of Lubricants using Tensile and Hardness Behavior of Friction Stir Cast Welds for
Wire Arc Additive Manufacturing Advanced Statistical Methods Automotive Application.
Conference Dinner (19:00 – 21:00), ICSR Dining Hall
 Day 3 (7th December 2024)
ICSR Hall 2 ICSR Hall 3
EP 26 Dr. Vasudevan IGCAR Kalpakam, India EP 28 Prof. Tsunehisa Suzuki, Akita Pref Univ, Japan
Session F Development of Structural Materials and the Associated Effects of Ion Beam Irradiation on the Crystal Growth of Tin
09:00 - 09:30
Expert Lecture Processing and Welding Technologies for Fast Breeder Thin Films and the Interface Between the Films and Cemented
Reactors Carbide Substrates
EP 27 Prof. Hiroki Akasaka, Inst. of Sci Tokyo, Japan EP 29 Dr. Jayaprakash M, IIT Indore, India
09:30 – 10:00 Shape and Structure Changes of Diamond-Like Carbon Development of High-Temperature Ti alloys with improved
Films by Defocused Laser Irradiation properties
ICSR Hall 2 ICSR Hall 3
Session F2 Polymer & Composite Session F3 Material Processing
C-49 Abir Saha, IIT Guwahati, India C-53 Junpei Sakurai, Nagoya Univ. Japan
Development of Bamboo Micro Particle- Long Fiber Combinatorial Searching for High Heat-Resistant Thin Film
10:00 - 10:15 Reinforced Hybrid Green Comp for Automobile Interior Amorphous Alloys for MEMS Ultrasonic Devices
Apps
C-50 Shruti Gupta, DIAT Pune, India C-54 Yuya Takamatsu, Nagoya Univ. Japan
10:15 – 10:30 Recycling Carbon Fiber Via Additive Manufacturing for Three-Dimensional Estimation of Oxide Film Removal in
Contributory Superior Mechanical Properties Surface Activated Bonding using a Fast Atom Beam
Presentations C-51 Kazutoshi Tachibana, Macoho Co., Ltd., Japan C-55 Tetsuro Yanaseko, Kogakuin Univ. Japan
Trial of Replacement From Conventional Pickling to Wet Evaluation of Healing State of Self-Healing Ceramics by
10:30 – 10:45 Shot Blasting Prior to Zinc-Phosphate Lubrication for Cold Acoustic Emission
Forming
C-52 Jinrong Liu, Kindai Univ. Japan C-56 Taro Kanehira, Kindai Univ. Japan
10:45 – 11:00 Machinability of Carbon Fiber Reinforced Al Alloy Effects of Phosphorus and Calcium on the Refinement of
Composite Mg2Si Crystallized in Mg Alloy
11:00 – 11:15 Refreshments / Coffee Break
ICSR Hall 2 ICSR Hall 3
Session G2 Modeling and Analysis Session G3 Material Processing
C-57 Nodoka Inui, Nagoya Univ. Japan C-64 Anup Kumar Maurya, IIT Madras, India
11:15 – 11:30 Novel Design and Fabrication of Tactile Pin Actuator for Optimizing Surface Roughness of LPBF-CoCrMo for
Tactile Displays Utilizing Origami Structure Enhanced HA Coatings
Contributory C-58 Kohei Nobata, Univ. of Fukui. Japan C-65 Yuki Hirata, Institute of Science Tokyo, Japan
11:30 – 11:45 Presentations Toolpath Generation From Product Depth Map in Synthesis of 2D Nanomaterials and Exploration of Van Der
Incremental Forming by Convolutional Neural Network Waals Heterostructures using SAHP Method
11:45 – 12:00 C-59 Yuto Koga, Osaka Inst of Tech. Japan C-66 Bhartendu Mani Tripathi, IIT BHU, India
 A Study on Suppression of Electrode Deformation in Fe/Al Synthesis and Characterization of Beeswax-Lauric Acid-
Resistance Heating Clinching by Using W Punch-Shaped Graphite/Zeolite Form-Stable Composite PCM for Building
Electrode Apps
C-60 Sujith Reddy Jaggannagari, IIT Madras , India C-67 Sumangala T. P. VIT Vellore, India
Analysis of Powder Bed Homogeneity in Additive Effect of Cobalt Ferrite Conc. on the EMI Shielding
12:00 – 12:15 Manufacturing Through Multi-Layer Spreading Effectiveness of Cu Ferrite/Graphene-Based Epoxy Composites
Simulations
C-61 Sahil K Yadav, IIT Delhi, India C-68 Puli Akshita Govind, NIT Tiruchirappalli., India
12:15 – 12:30 Process Parameters Optimization for Patterned Vertically Fabrication of Thermoelectric Materials From High Entropy
Aligned Carbon Nanotube Growth Alloys
C-62 Anurag Dubey, INSA Centre Val De Loire, France C-69 Pranab Jyoti Barman, JIST, India
A Method to Identify and Characterize Damage in Design and Treatability Studies of a Low-Cost Biofilter
12:30 – 12:45 Mechanical Structures Using Dynamic Parameters
Changes
C-63 Daniel Napoleón G B, ITESHU, Mexico C-70 A. Madhubala, IIT Madras, India
12:45 – 13:00 Agricultural Tractor VR/AR for training Influence of Parameters on the Synthesis of Moalb Phase
Alloys
13:00 – 14:00 Lunch
ICSR Hall 2 ICSR Hall 3
Session H2 Additive Manufacturing Session H3 Material Processing
C-71 Usha Rani S, IIT Madras, India C-81 S S Satheesh Kumar, DMRL, Hyderabad, India
14:00 – 14:15 A Study on the Influence of Annealing on Mechanical, Achieving Superplasticity in Ni Based Superalloy Processed
Wear Behavior, and Corrosion LPBF Processed Ti Alloy Mult Axial Forging
C-72 Krishna K Yadav, HBNI, Mumbai, India C-82 Milan Shahana, IIT Madras, India
Process Stability, Microstructural and Mechanical Microstructural Insights and Atomic-Scale Analysis of Gas
14:15 – 14:30 Characterization of Spiral-Weaved 316L SS Steel CMT- Atomized Inconel 718 Coatings Processed by Cold Spray and
WAAM Deposit Heat Treatment
C-73 Vishwas Swarnkar, IIT Madras, India C-83 Farhanuzzaman Khan, IIT Madras, India
Does Base Plate Preheat Temperature and Gas Flow Rate Influence of Laser Scan Strategy on Morphological
14:30 – 14:45 Distribution Significantly Affect the Bead Morphology in Characteristics of Sheet-Based Schwarz Diamond TPMS
Contributory Single-Track Experiments Fabricated using LPBF? Lattice Structure Manufactured by LPBF
Presentations
C-74 Midhun Shah, Univ. of Calicut, India C-84 Pavani Udatha, RGUKT-AP, India
14:45 – 15:00 Graphite Sintered Sr1-Xprxtio3 for Thermoelectric Characterization of a Palm Tree Trunk, a Natural
Applications Functionally Graded Structure
C-75 R Ramesh, IIT Madras, India C-85 Alwin Balasundaram, IIT Madras, India
Effect of Post-Processing on Microstructure and Wear Behavior of T400 Reinforced Ni-20Cr Coatings at Room
15:00 – 15:15 Mechanical Behavior of An Additively Manufactured and Elevated Temperature
AlSi10mg Alloy
C-76 Balasubramani V, Thiagarajar Col of Engg, India C-86 Amiya Prakash Das, IIT Madras, India
15:15 – 15:30 Mechanical Characterization of Natural Epoxy Composites Mechanical Characterization of Manganese-Rich Polymetallic
Reinforced with Banana Fibre and Flax Fibre Nodules
 C-77 Koilakuntla V, IIT Goa, India C-87 Jamshina Sanam P.K, Univ. of Calicut, India
Generation of Realistic 2-Dimensional Microstructure of Designing Low Band Gap High Performing Thermoelectric
15:30 – 15:45 Fiber Reinforced Composites: Incorporating Voids and Material of Cucro2 Via Multi-Cation Doping for Synergistic
Resin-Rich Pockets Photovoltaic Energy Conversion
C-78 Anurag Sahu, IIT Madras, India C-88 Vanguri P, RGUKT-Nuzvid, India
15:45 – 16:00 Effect of Heat Treatment on Tensile & Fretting Wear Effect of Various Supplementary Cementitious Materials on
Properties of Additively Manufactured Inconel 718 the Properties of Pervious Concrete
C-79 Poonam, CCET Chandigarh, India C-89 Deepak K Pawar, IIT Madras, India
Pre-Earthquake Rapid Visual Screening (RVS) & Investigating Contact Force Models in Drained Triaxial
16:00 – 16:15 Earthquake Safety Assessment of RCC and Masonry Compressiovin of Granular Materials: Insights from DEM
Buildings Located in the Chandigarh Area (India) Simulations
C-80 Sreekanth M. S. VIT Vellore, India
Enhanced Interfacial Properties of Silane Modified Carbon
16:15 – 16:30 Fiber Grafted MoS2/MWCNTs -Based Epoxy
Nanocomposites for Structural Application
16:30 – 17:00 Closing Session
 ICSR Hall 4, Exhibition Hall
Day 1: 5th December 2024 (16:45 – 17:45), Day 2: 6th December 2024 (14:00 – 15:00)
Poster ID Name of the Presenter Title of the Poster

P-01 Pranab Jyoti Barman Comprehensive Study of Partial Replacement of Cement with Biochar in Concrete

P-02 Yuki Miyoshi Advanced Measurement of Carbon Particle Emission in Fast Atom Beam Source and Analysis of the Emission Mechanism

P-03 Jinglan Xie The Fatigue Properties of Ni-Nb-Zr Thin Film Amorphous Alloys under Ultrasonic Vibration

P-04 Anshika Bagla Sustainable Smart Piezoelectric Sensors for Health Monitoring Based on Bamboo Microfibril Reinforced PVDF Nanofibers

P-05 Amiya Prakash Das Mechanical Characterization of Manganese Rich Polymetallic Nodules

P-06 Mathi Vignesh P Bio-Inspired Camouflage Coating Mimicking Chameleon Colour-Changing Ability

P-07 Hirofumi Tomi Refinement of Solidification Microstructure of Mg2Si Particle-Dispersion Magnesium Alloys by Ultrasonic Vibration.

P-08 Neeraj C S Effect of Light on Crack Propagation in Liquid Crystal Polymer Networks

P-09 Monisha Additively Manufactured Titanium Dental Fixtures with ZnO Coated Surface for Improved Antimicrobial Property

P-10 Shivam Korde Parameter Optimization and Structural Integrity of Spin Arc Welded Al 2219 Alloys

P-11 Milan Shahana Microstructural Insights and Atomic-Scale Analysis of Gas Atomized Inconel 718 Coatings Processed by Cold Spray and Heat
Treatment
P-12 Imthiaz Ahmed M Synthesis of Polyhedral Sno2 for the CO2 Electrochemical Reduction to Formic Acid

P-13 Nareshkumar Jayaseelan Experimental Investigation on Compressive Behaviour of Encased Steel Concrete Composite Sections using Self Compacting Concrete
with Rubber Powder
P-14 Giritharan Samynathan Compressive Behaviour of Encased Steel Concrete Composite Sections using Self Compacting Concrete With Rubber Powder

P-15 Sree Harsha Choutapalli Piezoresistive Properties of Selectively Laser-Assisted Al- and P-Doped Semi-Insulating 4H-Silicon Carbide Substrates

P-16 Gimmi Guruprasad Engoor Biocompatibility and Antifouling of Laser-Induced Periodic Surface Structures on Ti-Based Materials
P-17 Pream Kumar AL, Coir Yarn Friction in Technical Textiles – A New Methodology for Assessment

P-18 Soundhar Arumugam Tribological and Mechanical Characterization of Banana Fiber Reinforced PLA Bio-Composites

P-19 G V Balakrishna Lubricant Deterioration in EV Motor Bearings – Simulated Studies

P-20 Mahesh M Drag Reduction of High-Speed Aircrafts Through Bioinspired Istiophorus Platypterus [Sailfish] Skin Morphology

P-21 Emayavaramban M Comparative Investigation and Analysis of Dental Implant for Different Bio-Compatible Alloys

P-22 Sumandeep Rana Design and Development of 3D Printed Flexible Samples for Automobile Headliners Application

P-23 Keerthika N B Tensile Characteristics of 3D Printed Flexible Polybutylene Succinate (PBS) / Coir Composite

P-24 Abir Saha Development of Bamboo Micro-Particle- Long Fiber Reinforced Hybrid Green Comp for Automobile Interior Apps

P-25 Rahul Srivastava Insights Into the Bonding Characteristics and Bendability of Al/Mg/Al Tri-Layered Multi-Metallic Clad Sheets

P-26 Sahil Kumar Yadav Process Parameters Optimization for Patterned Vertically Aligned Carbon Nanotube Growth

P-27 Liu Jinrong Machinability of Carbon Fiber Reinforced Al Alloy Composite

P-28 Madhubala A Influence of Parameters on the Synthesis of MoAlB Phase Alloys

P-29 Arvind Kumar Innovative Additive Manufactured Pressure Sensors: Design and Simulation for Health Applications

P-30 Kaito Kikuchi Long Natural Fibre Reinforcement in Polymers using 3D Printing -Tensile and Flexural Behaviour

P-31 Soma Maji Simulation of Heat Transfer and Microstructural Evolution During Additive Manufacturing of Inconel 625

P-32 Anurag Sahu Effect of Heat Treatment on Tensile & Fretting Wear Properties of Additively Manufactured Inconel 718

P-33 Manickavasagam T Impact of Fiber Reinforcement on Flexural Properties: A Comparative Study of 3D printed PLA & PLA Composite