2. m3m, Panipat Villa (Bbs) 25102024

CLIENT :- M3M
PROJECT :- TOWNSHIP, SECTOR 36/37, PANIPAT, HARYANA

SUBJECT :- VILLA REINFORCEMENT SUMMARY
CONTRACTOR :- GAMUT BUILDCON PVT. LTD.
S.NO. DETAIL OF WORK UNIT SUBMITTED QTY CERTIFIED QTY DIFF REMARKS
1 FOOTINGS KG 24400.638 23296.000 1104.638 Checked
2 REAINING WALLS, STICHING SLAB, SUMP & BALANCING TANK KG 36504.641 35403.000 1101.641 Only Stitch Slab Uncheck
3 COLUMNS FROM FOUNDATION TO BASEMENT FLOOR ROOF KG 23313.866 24231.524 -917.658 Checked
4 BASEMENT FLOOR ROOF BEAM, SLAB & STAIRCASE KG 39061.176 35394.920 3666.256 Checked
5 COLUMNS FROM BASEMENT FLOOR ROOF TO GROUND FLOOR ROOF KG 13722.885 13059.767 663.118 Checked
6 GROUND FLOOR ROOF BEAM, SLAB & STAIRCASE KG 38078.578 34640.768 3437.810 Checked
7 COLUMNS FROM GROUND FLOOR ROOF TO FIRST FLOOR ROOF KG 13708.307 12092.782 1615.525 Checked
8 FIRST FLOOR ROOF BEAM, SLAB & STAIRCASE KG 51082.024 46884.425 4197.599 Checked
9 COLUMNS FROM FIRST FLOOR ROOF TO SECOND FLOOR ROOF KG 12246.258 11540.760 705.498 only above terrace column uncheck
10 SECOND FLOOR ROOF SLAB KG 38734.135 33927.003 4807.132 Checked
11 U.G. TANK & GUARD ROOM KG 1644.830 1554.122 90.708 Guard Room uncheck
TOTAL KG 292497.338 272025.071 20472.267
TOTAL MT 292.497 272.025 20.472

CLIENT :- M3M - - TOTAL MT 23.30
SUBJECT :- VILLA REINFORCEMENT SUMMARY DIA WISE
Reinforcement Steel
No of Nos. of Total No. Of Cutting Total Length of Bar Dai wise
S.No. Description. Nos. Dia A B C D
Unit Bars No. Bend Length 8 10 12 16 20 25 28 32 Remarks
REINFORCEMENT STEEL
STEEL OF FOOTINGS=16 NOS.
COVER=50 MM
A) FOOTING F1 (4800*4400)=1 4.800 4.400 0.750 SEC-1-1
BOTTOM JALL - - - - - - - -
a) Bottom Main Bar 16 dia @ 100 MM c/c 2 48 1 96 16 0.500 4.30 0.500 2 5.236 - - - 502.66 - - - -
b) Bottom Cross Bar 16 dia @ 100 MM c/c 2 44 1 88 16 0.500 4.70 0.500 2 5.636 - - - 495.97 - - - -
TOP JALL - - - - - - - - -
a) Top Main Bar 10 dia @ 200 MM c/c 2 25 1 50 10 0.500 4.30 0.500 2 5.260 - 263.00 - - - - - -
b) Top Cross Bar 10 dia @ 200 MM c/c 2 23 1 46 10 0.500 4.70 0.500 2 5.660 - 260.36 - - - - - -
c) 12 dia. Chairs 2 20.00 1 40 12 0.924 0.600 0.924 4 2.352 - - 94.08 - - - - -
B) FOOTING F2 (4200*3800)=2 4.200 3.800 0.600 - - - - - - - - - SEC-1-1
BOTTOM JALL - - - - - - - - -
a) Bottom Main Bar 16 dia @ 100 MM c/c 2 42.0 2 168 16 0.400 3.70 0.400 2 4.436 - - - 745.25 - - - -
b) Bottom Cross Bar 16 dia @ 100 MM c/c 2 38.0 2 152 16 0.400 4.10 0.400 2 4.836 - - - 735.07 - - - -
TOP JALL - - - - - - - - -
a) Top Main Bar 10 dia @ 200 MM c/c 2 22.00 2 88 10 0.400 3.70 0.400 2 4.460 - 392.48 - - - - - -
b) Top Cross Bar 10 dia @ 200 MM c/c 2 20.00 2 80 10 0.400 4.10 0.400 2 4.860 - 388.80 - - - - - -
c) 12 dia. Chairs 2 15.00 2 60 12 0.784 0.60 0.784 4 2.072 - - 124.32 - - - - -
C) FOOTING F3 (4000*3800)=2 4.000 3.800 0.700 - - - - - - - - - SEC-1-1
BOTTOM JALL - - - - - - - - -
TOP JALL - - - - - - - - -
c) 12 dia. Chairs 2 14.00 2 56 12 0.884 0.60 0.884 4 2.272 - - 127.23 - - - - - SEC-4-4
D) FOOTING F4 (3000*3000)=1 3.00 3.00 0.600 - - - - - - - - -
BOTTOM JALL - - - - - - - - -
a) Bottom Main Bar 12 dia @ 100 MM c/c 2 30.00 1 60 12 0.400 2.90 0.400 2 3.652 - - 219.12 - - - - -
b) Bottom Cross Bar 12 dia @ 100 MM c/c 2 30.00 1 60 12 0.400 2.90 0.400 2 3.652 - - 219.12 - - - - -
TOP JALL - - - - - - - - -
c) 12 dia. Chairs 2 8.00 1 16 12 0.788 0.60 0.788 4 2.080 - - 33.28 - - - - - SEC-4-4
E) FOOTING F5 (6800*4300)=1 6.80 4.30 0.750 - - - - - - - - -
BOTTOM JALL - - - - - - - - -
TOP JALL - - - - - - - - -
a) Top Main Bar 12 dia @ 200 MM c/c 1 35.00 1 35 12 0.500 4.20 0.500 2 5.152 - - 180.32 - - - - -
2
b) Top Cross Bar 12 dia @ 200 MM c/c 1 22.00 1 22 12 0.500 6.70 0.500 2 7.652 - - 168.34 - - - - -
c) 12 dia. Chairs 1 28.00 1 28 12 0.934 0.60 0.934 4 2.372 - - 66.42 - - - - - SEC-4-4
F) FOOTING F6 (6500*6483)=1 (LIFT) 6.50 6.483 0.750 - - - - - - - - -
BOTTOM JALL - - - - - - - - -
TOP JALL - - - - - - - - -
c) 12 dia. Chairs 2 41.00 1 82 12 0.934 0.60 0.934 4 2.372 - - 194.50 - - - - - SEC-4-4
G) FOOTING F7 (AS PLAN)=1 13.760 3.000 3.800 4.300 0.800 6.80 6.800 - - - - - - - -
BOTTOM JALL - - - - - - - - -
a) Bottom Main Bar 20 dia @ 100 MM c/c 1 110.00 1 110 20 0.533 2.90 0.533 2 3.887 - - - - 427.53 - - -
b) Bottom Cross Bar 20 dia @ 100 MM c/c 1 24.00 1 24 20 0.533 17.96 0.533 2 18.947 - - - - 454.72 - - -
c) Overlaps 20 dia. At Bottom 1 24.00 1 24 20 1.000 1.000 - - - - 24.00 - - -
TOP JALL - - - - - - - - -
c) Overlaps 12 dia. At Top 1 16.00 1 16 12 0.60 0.600 - - 9.60 - - - - -
d) 12 dia. Chairs 1 40.00 1 40 12 0.930 0.60 0.930 4 2.364 - - 94.56 - - - - -
BOTTOM JALL - - - - - - - - -
TOP JALL - - - - - - - - -
c) 12 dia. Chairs 1 40.00 1 40 12 0.930 0.60 0.930 4 2.364 - - 94.56 - - - - -
H) FOOTING F8 (8800*2800)=1 8.80 2.800 0.850 - - - - - - - - -
BOTTOM JALL - - - - - - - - -
TOP JALL - - - - - - - - -
a) Top Main Bar 12 dia @ 200 MM c/c 2 45.00 1 90 12 0.567 2.75 1 3.293 - - 296.34 - - - - -
c) 12 dia. Chairs 2 23.49 1 47 12 1.030 0.60 1.030 4 2.564 - - 120.46 - - - - - SEC-4-4
I) FOOTING F9 (12600*3000)=1 12.60 3.000 0.800 - - - - - - - - -
BOTTOM JALL - - - - - - - - -
Overlaps 20 dia. At Bottom 1 30.00 1 30 20 1.000 1.000 - - - - 30.00 - - -
TOP JALL - - - - - - - - -
Overlaps 10 dia. At Top 1 16.00 1 16 10 0.500 0.500 - 8.00 - - - - - -
c) 12 dia. Chairs 1 23 1 23 12 0.980 0.60 0.980 4 2.464 - - 57.88 - - - - - SEC-4-4
-
3
TOTAL LENGTH OF BARS IN RMT - 2,783.92 4,211.26 6,237.96 3,242.02 - - -
- - - - - - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
Total Qty. of Reinforcement. - 1,717.679 3,739.603 9,843.504 7,994.821 - - -
GRAND TOTAL OF STEEL KG 23,295.61
4
CLIENT :- M3M - - TOTAL MT 35.403
PROJECT : 0
SUBJECT :- VILLA REINFORCEMENT SUMMARY
WORK:- STEEL OF RETAINING WALLS
Reinforcement Steel
Nos. of Total No. Of Cutting Total Length of Bar Dai wise

S.No. Description. No of Unit Nos. Dia A B C D
Bars No. Bend Length 8 10 12 16 20 25 28 32 Remarks
1 RETAINING WALL FOOTINGS
A) In between Grids (V1-V3/Y) & (V6-V8/Y)=2 -
(L=11.832*1.200) (H-0.400) 11.832 1.20 0.40 -
BOTTOM JALL SEC-7-7
a) Bottom Main Bar 12 dia @ 125MM c/c 2 76.00 1 152 12 0.300 1.10 0.300 2 1.652 251.10 -
b) Bottom Cross Bar 12 dia @ 150 c/c 2 8.00 1 16 12 0.300 11.732 0.300 2 12.284 - - 196.54 - - - - -
TOP JALL - - - - - - - -
a) Top Main Bar 10 dia @ 200 MM c/c 2 48.00 1 96 10 0.300 1.150 1 1.430 - 137.28 - - - - - -
b) Top Main Bar 10 dia @ 200 MM c/c 2 7.00 1 14 10 0.300 11.732 0.300 2 12.292 - 172.09 - - - - - -
c) 12 dia. Chairs 2 14 1 28 12 0.578 0.60 0.578 4 1.660 - - 47.14 - - - - -
B) In between Grids (V1-V3/X) & (V6-V8/X)=2 - - - - - - - -
(L=11.832*1.200) (H-0.400) 11.832 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
a) Bottom Main Bar 12 dia @ 125MM c/c 2 76.00 1 152 12 0.300 1.10 0.300 2 1.652 - - 251.10 - - - - -
TOP JALL - - - - - - - -
b) Top Main Bar 10 dia @ 200 MM c/c 2 7.00 1 14 10 0.300 11.732 0.300 2 12.292 - 172.09 - - - - - -
c) 12 dia. Chairs 2 14 1 28 12 0.578 0.60 0.578 4 1.660 - - 47.14 - - - - -
C) In between Grids (Y-X/V1) & (Y-X/V8)=2 - - - - - - - -
(L=2.027) (H-0.400) 2.027 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
b) Bottom Cross Bar 12 dia @ 150 c/c 2 8.00 1 16 12 0.300 3.177 2 3.429 - - 54.86 - - - - -
TOP JALL - - - - - - - -
b) Top Main Bar 10 dia @ 200 MM c/c 2 3.00 1 6 10 0.300 3.177 1 3.457 - 20.74 - - - - - -
c) 12 dia. Chairs 2 2 1 5 12 0.578 0.60 0.578 4 1.660 - - 8.08 - - - - -
(L=1.160) (H-0.400) 1.160 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-6-6
TOP JALL - - - - - - - -
a) Top Main Bar 10 dia @ 200 MM c/c 1 4 1 4 10 0.300 1.10 1 1.380 - 5.52 - - - - - -
5
b) Top Main Bar 10 dia @ 200 MM c/c 1 6 1 6 10 0.300 1.060 1 1.340 - 8.71 - - - - - -
c) 12 dia. Chairs 1 1 1 1 12 0.578 0.60 0.578 4 1.660 - - 2.31 - - - - -
(L=1.160) (H-0.400) 2.740 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 3 1 7 12 0.578 0.60 0.578 4 1.660 - - 10.92 - - - - -
(L=3.493) (H-0.400) 3.493 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
TOP JALL - - - - - - - -
a) Top Main Bar 10 dia @ 200 MM c/c 2 16 1 32 10 0.300 1.10 1 1.380 - 44.16 - - - - - -
c) 12 dia. Chairs 2 4 1 8 12 0.578 0.60 0.578 4 1.660 - - 13.92 - - - - -
- - - - - - - -
D) In between Grids (Y-X/V3) & (Y-X/V6)=2 - - - - - - - -
(L=3.127) (H-0.400) 3.127 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 4 1 8 12 0.578 0.60 0.578 4 1.660 - - 12.46 - - - - -
(L=1.775) (H-0.400) 1.775 1.200 0.400 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-6-6
TOP JALL - - - - - - - -
c) 12 dia. Chairs 1 2 1 2 12 0.578 0.60 0.578 4 1.660 - - 3.54 - - - - -
(L=2.458) (H-0.400) 2.383 1.200 0.400 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
6
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 3 1 6 12 0.578 0.60 0.578 4 1.660 - - 9.49 - - - - -
(L=5.326) (H-0.400) 5.326 1.20 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 6 1 13 12 0.578 0.60 0.578 4 1.660 - - 21.22 - - - - -
(L=7.195) (H-0.400) 7.195 1.200 0.40 - - - - - - - -
BOTTOM JALL - - - - - - - - SEC-7-7
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 9 1 17 12 0.578 0.60 0.578 4 1.660 - - 28.66 - - - - -
- - - - - - - -
2 STEEL OF STICHING SLAB - - - - - - - -
Total Area of Internal Slab=806.56 SQM - - - - - - - - - -
AREA AS PER RCC - - - - - - - -
10 MM dia. Bars @ 200 MM C/C Both Ways - - - - - - - - - -
Total Steel Used Per SQM=6.170 KG/SQM - - - - - - - - - -
Total Length of Steel in RMT 8065.6372 - - - - - - - -
Total Length of 10 MM dia. Bars @ 200 MM
1 1 1 1 10 8065.64 - 8,065.64 - 8,065.64 - - - - - -
C/C Both Ways
- - - - - - - -
3 STEEL OF RETAINING WALLS - - - - - - - -
Wall in between Grids (V1-V3)/Y & (V6-
A) - - - - - - - -
V8)/Y)=2
TOTAL LENGTH OF WALL (L=11.832-0.230-0.45-0.45-0.230=10.472) - - - - - - - -
OUTER FACE 10.472 - - - - - - - -
a) Vertical Bars 12 dia. @ 200 MM C/C 2 52.00 1 104 12 0.375 5.050 0.150 2 5.527 - - 574.81 - - - - -
b) Overlaps Vertical Bars 12 dia. 2 52.00 1 104 12 0.600 0.600 - - 62.40 - - - - -
c) Vertical Bars (Extra) 12 dia. @ 200 MM C/C 2 52.00 1 104 12 0.375 2.150 1 2.501 - - 260.10 - - - - -
d) 10 MM dia. Binders @ 200 C/C - - - - - - - -
7
Height =((0.050+0.075+4.630+0.600-0.075-
4.580 - - - - - - - -
0.150=5.180)
Binder 2 24.00 1 48 10 11.772 11.772 - 565.06 - - - - - -
e) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -
INNER FACE 10.472 - - - - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -
Height =((0.050+0.075+4.630+0.600-0.075-
4.580 - - - - - - - -
0.150=5.180)
Binder 2 24.00 1 48 10 11.772 - 11.772 - 565.06 - - - - - -
d) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -
10 dia. Spacer Bars 0 48 1 0 10 1.046 2 1.006 - - - - - - - -
Wall in between Grids (V1-V2)/X & (V7-
B) - - - - - - - -
V8)/X)=2
- - - - - - - -
OUTER FACE 10.172 - - - - - - - -

Height =((0.075+0.075+4.080+0.600-0.075-
4.580 - - - - - - - -
0.150=4.605)
0 " 2 24.00 1 48 10 11.772 11.772 - 565.06 - - - - - -
e) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -
INNER FACE 10.172 - - - - - - - -

Height =((0.075+0.075+4.080+0.600-0.075-
4.580 - - - - - - - -
0.150=4.605)
" 2 24.00 1 48 10 11.772 - 11.772 - 565.06 - - - - - -
d) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -
10 dia. Spacer Bars 0 47 1 0 10 1.046 2 1.006 - - - - - - - -
Wall in between Grids (Y-X)/V1 &
C) - - - - - - - -
(Y-X)/V8)=2
TOTAL LENGTH OF WALL (L=45.201-0.45-0.600-1.200-0.600-0.600-0.600-1.200-
- - - - - - - -
1.200-0.75-0.450-.300=37.251)
OUTER FACE 37.251 - - - - - - - -
a) Vertical Bars 12 dia. @ 200 MM C/C 2 186.00 1 372 12 0.375 5.050 0.150 2 5.527 - - 2,056.04 - - - - -
8
Height =((0.075+0.075+4.080+0.600-0.075-
4.580 - - - - - - - -
0.150=4.605)
Binder 2 24.00 1 48 10 45.141 45.141 - 2,166.77 - - - - - -
e) Overlaps 10 MM dia. 2 72.00 1 144 10 0.500 0.500 - 72.00 - - - - - -
INNER FACE 37.251 - - - - - - - -

b) Overlaps Vertical Bars 12 dia. 2 248 1 496 12 0.600 0.600 - - 297.60 - - - - -
Height =((0.075+0.075+4.080+0.600-
4.580 - - - - - - - -
0.150=4.680)
" 2 24.00 1 48 10 45.141 - 45.141 - 2,166.77 - - - - - -
d) Overlaps 10 MM dia. 2 72 1 144 10 0.500 0.500 - 72.00 - - - - - -
10 dia. Spacer Bars 0 176 1 0 10 1.046 2 1.006 - - - - - - - -

D) - - - - - - - -
(Y-X)/V6)=2
TOTAL LENGTH OF WALL (L=45.201-0.45-0.45-1.200-0.45-0.45-1.200-1.200-0.75-

- - - - - - - -
0.45=38.601)
OUTER FACE 38.601 - - - - - - - -

Height =((0.075+0.075+4.080+0.600-0.075-
4.580 - - - - - - - -
0.150=4.605)
Binder 2 24.00 1 48 10 45.141 45.141 - 2,166.77 - - - - - -
e) Overlaps 10 MM dia. 2 72 1 144 10 0.500 0.500 - 72.00 - - - - - -
INNER FACE 38.601 - - - - - - - -

a) Vertical Bars 12 dia. @ 150 MM C/C 2 257 1 514 12 0.375 5.050 0.150 2 5.527 - - 2,840.88 - - - - -
b) Overlaps Vertical Bars 12 dia. 2 257 1 514 12 0.600 0.600 - - 308.40 - - - - -
Height =((0.075+0.075+4.080+0.600-
4.580 - - - - - - - -
0.150=4.680)
Binder 2 24.00 1 48 10 45.141 - 45.141 - 2,166.77 - - - - - -
d) Overlaps 10 MM dia. 2 72 1 144 10 0.500 0.500 - 72.00 - - - - - -
10 dia. Spacer Bars 0 176 1 0 10 1.046 2 1.006 - - - - - - - -
STEEL OF WALLS BELOW 4080 MM HEIGHT - - - - - - - -
Wall in between Grids (V1-V3)/Y & (V6-
A) - - - - - - - -
V8)/Y)=2
OUTER FACE 10.472 - - - - - - - -
a) Vertical Bars 12 dia. @ 200 MM C/C 2 52.00 1 104 12 0.550 0.550 - - 57.20 - - - - -
9
b) Vertical Bars (Extra) 12 dia. @ 200 MM C/C 2 52.00 1 104 12 0.550 0.550 - - 57.20 - - - - -
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
Binder 2 4.00 1 8 10 11.772 11.772 - 94.18 - - - - - -
INNER FACE 10.472 - - - - - - - -

b) 10 MM dia. Binders @ 200 C/C - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
Binder 2 4.00 1 8 10 11.772 - 11.772 - 94.18 - - - - - -
10 dia. Spacer Bars 0 6 1 0 10 1.046 2 1.006 - - - - - - - -
Wall in between Grids (V1-V3)/X & (V6-
B) - - - - - - - -
V8)/X)=2
OUTER FACE 5.569 - - - - - - - -
Height =(4.600-4.080=0.520) 0.520 - - - - - - - -
Binder 2 3.00 1 6 10 6.939 6.939 - 41.63 - - - - - -
INNER FACE 5.569 - - - - - - - -

Heigh=(4.630-4.080=0.550) 0.520 - - - - - - - -
Binder 2 3.00 1 6 10 6.939 - 6.939 - 41.63 - - - - - -
10 dia. Spacer Bars 0 3 1 0 10 1.046 2 1.006 - - - - - - - -

C) - - - - - - - -
(Y-X)/V8)=2
TOTAL LENGTH OF WALL (L=3.140-0.450=2.690) - - - - - - - -
OUTER FACE 2.690 - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
Binder 2 3.00 1 6 10 3.080 3.080 - 18.48 - - - - - -
INNER FACE 2.690 - - - - - - - -
10
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
Binder 2 3 1 6 10 3.080 - 3.080 - 18.48 - - - - - -
10 dia. Spacer Bars 0 2 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF WALL (L=18.060-0.75-1.2-1.2-0.6-0.6=13.710) - - - - - - - -
OUTER FACE 9.576 - - - - - - - -
Heigh=(4.600-4.080=0.5200) 0.520 - - - - - - - -
Binder 2 3.00 1 6 10 10.716 10.716 - 64.30 - - - - - -

d) Overlaps 10 dia. 2 3.00 1 6 10 0.500 0.500 - 3.00 - - - - - -
INNER FACE 9.576 - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.520 - - - - - - - -
Binder 2 3.00 1 6 10 10.716 - 10.716 - 64.30 - - - - - -
c) Overlaps 10 dia. 2 3.00 1 6 10 0.500 0.500 - 3.00 - - - - - -
10 dia. Spacer Bars 0 7 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF WALL (L=2.740) - - - - - - - -
OUTER FACE 2.740 - - - - - - - -
a) Vertical Bars 12 dia. @ 200 MM C/C 0 14 1 0 12 0.520 0.520 - - - - - - - -
b) Vertical Bars (Extra) 12 dia. @ 200 MM C/C 0 14 1 0 12 0.520 0.520 - - - - - - - -
Heigh=(4.600-4.080=0.5200) 0.520 - - - - - - - -
Binder 0 4 1 0 10 2.680 2.680 - - - - - - - -
INNER FACE 2.740 - - - - - - - -
a) Vertical Bars 12 dia. @ 150 MM C/C 0 19 1 0 12 0.520 0.520 - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.520 - - - - - - - -
Binder 0 4 1 0 10 2.680 - 2.680 - - - - - - - -
10 dia. Spacer Bars 0 1 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF WALL (L=6.500-0.6-0.6=5.300) (LIFT AREA) (SEC 8-8) - - - - - - - -
OUTER FACE 5.300 - - - - - - - -
11
Heigh=(1.650) 1.650 - - - - - - - -
Binder 2 8.00 1 16 10 6.440 6.440 - 103.04 - - - - - -
INNER FACE 5.300 - - - - - - - -
Heigh=(1.650) 1.650 - - - - - - - -
Binder 2 8.00 1 16 10 6.440 - 6.440 - 103.04 - - - - - -

10 dia. Spacer Bars 0 9 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF WALL (L=7.300-1.200=6.100) (POOL AREA) (SEC 11-11) - - - - - - - -
OUTER FACE 6.100 - - - - - - - -
Heigh=(1.350) 1.350 - - - - - - - -
Binder 2 7.00 1 14 10 7.240 7.240 - 101.36 - - - - - -
INNER FACE 6.100 - - - - - - - -
Heigh=(1.350) 1.350 - - - - - - - -
Binder 2 7.00 1 14 10 7.240 - 7.240 - 101.36 - - - - - -

10 dia. Spacer Bars 0 8 1 0 10 1.070 2 1.030 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF BALANCE WALL (L=7.145+0.230-0.450-0.600=6.325) - - - - - - - -
OUTER FACE 6.325 - - - - - - - -
Heigh=(1.350) 0.550 - - - - - - - -
Binder 2 3.00 1 6 10 7.315 7.315 - 43.89 - - - - - -
INNER FACE 6.325 - - - - - - - -
12
Heigh=(1.350) 0.550 - - - - - - - -
Binder 2 3.00 1 6 10 7.315 - 7.315 - 43.89 - - - - - -

10 dia. Spacer Bars 0 3 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
D) - - - - - - - -
(Y-X)/V6)=2
- - - - - - - -
OUTER FACE 10.576 - - - - - - - -
Heigh=(4.230-4.080=0.150) 0.150 - - - - - - - -
Binder 2 1.00 1 2 10 12.616 12.616 - 25.23 - - - - - -
INNER FACE 10.576 - - - - - - - -
Heigh=(4.230-4.080=0.150) 0.150 - - - - - - - -
" 2 1.00 1 2 10 12.616 - 12.616 - 25.23 - - - - - -
10 dia. Spacer Bars 0 2 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
TOTAL LENGTH OF WALL (L=2.980-0.450=2.530) - - - - - - - -
OUTER FACE 2.540 - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
" 2 3.00 1 6 10 2.930 2.930 - 17.58 - - - - - -
INNER FACE 2.530 - - - - - - - -
Heigh=(4.630-4.080=0.550) 0.550 - - - - - - - -
" 2 3.00 1 6 10 2.930 - 2.930 - 17.58 - - - - - -
10 dia. Spacer Bars 0 1 1 0 10 1.046 2 1.006 - - - - - - - -
- - - - - - - -
4 SUMP-01 (1.8*1.8) - - - - - - - -
A) SUMP FOOTING (1800*1800)=1 1.800 1.800 0.250 - - - - - - - - -
13
BOTTOM JALL - - - - - - - -
a) Bottom Main Bar 10 dia @ 200 MM c/c 2 10.00 1 20 10 0.150 1.70 0.150 2 1.960 - 39.20 - - - - - -
b) Bottom Cross Bar 10 dia @ 200 MM c/c 2 10.00 1 20 10 0.150 1.70 0.150 2 1.960 - 39.20 - - - - - -
TOP JALL - - - - - - - -
c) 12 dia. Chairs 2 3.00 1 6 12 0.430 0.60 0.430 4 1.364 - - 8.18 - - - - -
B) TOTAL LENGTH OF WALL (L=1.800)=2 - - - - - - - -
OUTER FACE 1.800 - - - - - - - -
a) Vertical Bars 10 dia. @ 150 MM C/C 2 9.00 2 36 10 0.250 1.960 0.250 2 2.420 - 87.12 - - - - - -
Height =1.80 1.800 - - - - - - - -
Binder 2 10.00 2 40 8 2.320 2 2.288 91.52 - - - - - - -
INNER FACE 1.500 - - - - - - - -
Height =1.80 1.800 - - - - - - - -
Binder 2 10.00 2 40 8 2.100 2.100 84.00 - - - - - - -
C) TOTAL LENGTH OF WALL (L=1.800)=2 - - - - - - - -
OUTER FACE 1.800 - - - - - - - -
Height =1.80 1.800 - - - - - - - -
" 2 10.00 2 40 8 2.320 2 2.288 91.52 - - - - - - -
INNER FACE 1.500 - - - - - - - -
Height =1.80 1.800 - - - - - - - -
" 2 10.00 2 40 8 2.100 2 2.068 82.72 - - - - - - -
D) SUMP ROOF (1.500*1.500)=1 1.500 1.500 - - - - - - - -
10 MM dia. Main Bars Bars @ 200 M/M C/c

0 9.00 1 0 10 0.150 1.760 0.150 2.060 - - - - - - - -
at Bottom & Top
10 MM dia. Cross Bars Bars @ 200 M/M C/c

0 9.00 1 0 10 0.150 1.760 0.150 2.060 - - - - - - - -
at Bottom & Top
12 MM dia. Chairs 0 2 1 0 12 0.390 0.600 0.390 1.380 - - - - - - - -
- - - - - - - -
5 SUMP-02 (1.060*1.060)=1 - - - - - - - -
A) SUMP FOOTING (1060*1060)=1 1.060 1.060 0.250 - - - - - - - - -
BOTTOM JALL - - - - - - - -
TOP JALL - - - - - - - -
14
c) 12 dia. Chairs 2 1 1 2 12 0.430 0.60 0.430 4 1.364 - - 3.07 - - - - -
OUTER FACE 1.060 - - - - - - - -
Height =0.600 0.600 - - - - - - - -
Binder 2 4.00 2 16 8 1.600 2 1.568 25.09 - - - - - - -
INNER FACE 0.600 - - - - - - - -
Height =0.600 0.600 - - - - - - - -
Binder 2 4.00 2 16 8 1.200 2 1.168 18.69 - - - - - - -
OUTER FACE 1.060 - - - - - - - -
Height =0.600 0.600 - - - - - - - -
" 2 4.00 2 16 8 1.600 2 1.568 25.09 - - - - - - -
INNER FACE 0.600 - - - - - - - -
Height =0.600 0.600 - - - - - - - -
" 2 4.00 2 16 8 1.200 2 1.168 18.69 - - - - - - -
D) SUMP ROOF (0.600*0.600)=1 0.600 0.600 - - - - - - - -
0 4 2 0 10 0.150 0.860 0.150 1.160 - - - - - - - -
at Bottom & Top
0 4 2 0 10 0.150 0.860 0.150 1.160 - - - - - - - -
at Bottom & Top
12 MM dia. Chairs 0 0 2 0 12 0.390 0.600 0.390 1.380 - - - - - - - -
- - - - - - - -
6 POOL (9.66*5.060) - - - - - - - -
A) POOL FOOTING 9.660 5.060 0.300 - - - - - - - - -
BOTTOM JALL - - - - - - - -
TOP JALL - - - - - - - -
c) 12 dia. Chairs 1 49 1 49 12 0.476 0.600 0.476 4 1.456 - - 71.17 - - - - -
OUTER FACE 5.060 - - - - - - - -
15
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 5.600 2 5.560 - 88.96 - - - - - -
INNER FACE 4.600 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 5.200 2 5.160 - 82.56 - - - - - -
OUTER FACE 2.441 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 2.981 2 2.941 - 47.06 - - - - - -
INNER FACE 2.211 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 2.810 2 2.770 - 44.32 - - - - - -
D) TOTAL LENGTH OF WALL (L=9.660)=2 - - - - - - - -
OUTER FACE 9.660 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 10.200 2 10.160 - 162.56 - - - - - -
INNER FACE 9.200 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 9.800 2 9.760 - 156.16 - - - - - -
D) TOTAL LENGTH OF WALL (L=7.700)=2 - - - - - - - -
OUTER FACE 7.700 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
Binder 2 8.00 1 16 10 8.240 2 8.200 - 131.20 - - - - - -
INNER FACE 7.470 - - - - - - - -
Height =1.350 1.350 - - - - - - - -
16
Binder 2 8.00 1 16 10 8.070 2 8.030 - 128.48 - - - - - -
7 BALANCING TANK (1.500*1.500*1.800)=1 - - - - - - - -
A) TOTAL LENGTH OF WALL (L=1.500)=1 - - - - - - - -
OUTER FACE 1.730 - - - - - - - -
Height =1.800 1.800 - - - - - - - -
Binder 2 10.00 1 20 10 2.500 2 2.460 - 49.20 - - - - - -
INNER FACE 1.500 - - - - - - - -
Height =1.800 1.800 - - - - - - - -
Binder 2 10.00 1 20 10 2.100 2 2.060 - 41.20 - - - - - -
OUTER FACE 1.267 - - - - - - - -
Height =1.800 1.800 - - - - - - - -
" 2 10.00 1 20 10 1.867 2 1.827 - 36.54 - - - - - -
INNER FACE 1.267 - - - - - - - -
Height =1.800 1.800 - - - - - - - -
Binder 2 10.00 1 20 10 1.867 2 1.827 - 36.54 - - - - - -
C) BALANCING TANK ROOF (1.500*1.500)=1 1.500 1.500 - - - - - - - -
2 11.00 1 22 10 0.150 1.920 0.150 2.220 - 48.84 - - - - - -
at Bottom & Top
2 11.00 1 22 10 0.150 1.920 0.150 2.220 - 48.84 - - - - - -
at Bottom & Top
12 MM dia. Chairs 0 2 1 0 12 0.390 0.600 0.390 1.380 - - - - - - - -
TOTAL LENGTH OF BARS IN RMT 437.31 24,998.19 22,304.86 - - - - -

- - - - - - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
Total Qty. of Reinforcement. 172.738 15,423.883 19,806.711 - - - - -
TOTAL STEEL OF RETAINING WALLS KG 35,403.33
17
CLIENT :- M3M - TOTAL MT 1.554
SUBJECT :- VILLA UG TANK & GUARD ROOM REINFORCEMENT
VILLA UG TANK & GUARD ROOM REINFORCEMENT

1) STEEL OF U.G. TANK & GUARD ROOM
A) U.G. TANK FOOTINGS -
OUT TO OUT SIZE 3.160 2.338 0.300 -
BOTTOM JALL -
a) Bottom Main Bar 12 dia @ 200 MM c/c 2 16.00 1 32 12 0.200 2.238 0.200 2 2.590 - 82.88 -
TOP JALL - - - - - - - -
a) Top Main Bar 12 dia @ 200 MM c/c 2 16.00 1 32 12 0.200 2.238 0.200 2 2.590 - - 82.88 - -
c) 12 dia. Chairs 2 7 1 15 12 0.480 0.60 0.480 4 1.464 - - 21.63 - - - - -
- - - - - -
B) STEEL OF RETAINING WALL - - - - - -
A) TOTAL LENGTH OF OUTER WALLS=3.160 M=2 NOS. - - - - - -
OUTER FACE 2.410 - - - - - -
b) 8 MM dia. Binders @ 175 C/C - - - - - - - - -
Height=1.950 MM 1.800 - - - - - - - - -
" 2 11.00 2 44 8 0.300 3.100 0.300 2 3.668 161.39 - - - - - - -
INNER FACE 2.410 - - - - - - - - -
Height =((0.075+0.075+3.230+0.600-0.075-
1.800 - - - - - - - - -
0.150=3.755)
" 2 11.00 2 44 8 0.300 3.100 0.300 2 3.668 161.39 - - - - - - -
10 dia. Spacer Bars 0 5 2 0 10 1.050 2 1.010 - - - - - - - -
B) TOTAL LENGTH OF OUTER WALLS=2.338 M=2 NOS. - - - - - -
OUTER FACE 1.878 - - - - - -
Height =((0.075+0.075+3.230+0.600-0.075-
1.800 - - - - - - - - -
0.150=3.755)
" 2 11.00 2 44 8 0.300 1.818 0.300 2 2.386 104.98 - - - - - - -
INNER FACE 1.878 - - - - - - - - -
Height =((0.075+0.075+3.230+0.600-0.075-
1.800 - - - - - - - - -
0.150=3.755)
" 2 11.00 2 44 8 0.300 1.818 0.300 2 2.386 104.98 - - - - - - -
10 dia. Spacer Bars 0 3 2 0 10 1.050 2 1.010 - - - - - - - -
-
C) STEEL OF TOP SLAB - - - - - -
Slab Size (3160*2338)=1 3.160 2.338 - - - - - - - - -
18
a) BOTTOM JALL - - - - - -
10 MM dia. Main Bars Bars @ 150 MM C/C
2 15.00 1 30 10 2.298 2.298 - 68.94 - - - - - -
Bottom
10 MM dia. Cross Bars Bars @ 150 MM C/C
2 10.00 1 20 10 3.120 3.120 - 62.40 - - - - - -
Bottom
b) TOP JALL - - - - - -
2 15.00 1 30 10 2.298 2.298 - 68.94 - - - - - -
Top
2 10.00 1 20 10 3.120 3.120 - 62.40 - - - - - -
Top
12 MM dia. Chairs 0 5 1 0 12 0.440 0.600 0.440 4 1.384 - - - - - - - -
2) STEEL GUARD ROOM

A) STELL OF COLUMNS=4 NOS.
HEIGHT=2.450
COVER=40 MM
A) Column SC1 (0.230*0.375)=4 0.230 0.375 - - - - - - - - -
a) Vertical Bars 16 dia. 2 6 4 48 16 0.450 2.370 2.820 - - - 135.36 - - - -
b) Main Ring Bar 8 dia @ 125 MM C/C 2 19 4 152 8 0.300 0.590 0.160 5 0.970 147.13 - - - - - - -
- - -
B) STEEL OF TOP SLAB - - - - - - - - -
Slab Size (1917*2338)=1 1.917 2.338 - - - - - - - - -
a) BOTTOM JALL - - - - - - - - -
2 14 1 27 10 1.877 1.877 - 50.75 - - - - - -
Bottom
2 12 1 24 10 2.298 2.298 - 56.29 - - - - - -
Bottom
b) TOP JALL - - - - - - - - -
2 14 1 27 10 1.877 1.877 - 50.75 - - - - - -
Top
2 12 1 24 10 2.298 2.298 - 56.29 - - - - - -
Top
12 MM dia. Chairs 2 3 1 6 12 0.390 0.600 0.390 4 1.284 - - 7.80 - - - - -
- -
TOTAL LENGTH OF BARS IN RMT 679.88 1,220.76 358.97 135.36 - - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
Total Qty. of Reinforcement. 268.553 753.209 318.762 213.598 - - - -
19
Err:509
CLIENT : 0 - - TOTAL MT
PROJECT 0
SUBJECT 0
WORK:- STEEL OF COLUMNS
Reinforcement Steel
No of Nos. of Bars Nos. Total No. Of Cutting Total Length of Bar Dai wise
S.No. Description. Dia A B C D
Unit No. Bend Length 8 10 12 16 20 25 28 32 Remarks
STEEL OF COLUMNS FROM FOUDATION TO BASEMENT
1 BS-GF.
FLOOR ROOF
STELL OF COLUMNS=43 NOS.
HEIGHT=4.680
COVER=40 MM
A) Column C1/F2 on Grid H7/V6 (0.708*1.200)=1 0.708 1.200
a) Vertical Bars 25 dia. 2 28 1 56 25 0.450 5.465 1 5.865 - - - - - 328.44 - -
b) Vertical Bars 12 dia. 2 12 1 24 12 0.450 5.465 0.300 1 6.191 - - 148.58 - - - - -
c) Overlaps 25 dia. 2 28 1 56 25 1.250 1.250 - - - - - 70.00 - -
d) Overlaps 12 dia. 2 12 1 24 12 0.600 0.600 - - 14.40 - - - - -
e) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 48.00 1 96 8 1.256 2.240 0.150 5 3.566 342.34 - - - - - - -
f) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 44.00 1 88 8 0.590 2.240 0.150 5 2.900 255.20 - - - - - - -
g) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 44.00 1 88 8 0.197 2.240 0.150 5 2.507 220.59 - - - - - - -
i) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 44.00 4 352 8 0.590 0.249 0.150 2 0.957 336.82 - - - - - - -
B) Column C1/F2 on Grid H1/V6 (0.375*1.200)=1 0.375 1.200 - - - - - - - - -
b) Overlaps 25 dia. 2 28 1 56 25 1.250 1.250 - - - - - 70.00 - -
c) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 47.00 1 94 8 0.590 2.240 0.150 5 2.900 272.60 - - - - - - -
d) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 43.00 1 86 8 0.197 2.240 0.150 5 2.507 215.57 - - - - - - -
e) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 43.00 4 344 8 0.590 0.249 0.150 2 0.957 329.17 - - - - - - -
C) Column C1/F9 & F7 on Grid H1/V8 (0.375*1.200)=1 0.375 1.200 - - - - - - - - -

b) Overlaps 25 dia. 2 28 1 56 25 1.250 1.250 - - - - - 70.00 - -
D) Column C1/F8 on Grid H7/V8 (0.375*1.200)=1 0.375 1.200 - - - - - - - - -
b) Overlaps 25 dia. 2 28 1 56 25 1.250 1.250 - - - - - 70.00 - -
E) Column C2/F1 on Grid H3/V6 (0.375*1.200)=1 0.375 1.200 - - - - - - - - -

b) Vertical Bars 16 dia. 2 4 1 8 16 0.450 5.465 1 5.883 - - - 47.06 - - - -
c) Overlaps 25 dia. 2 20 1 40 25 1.250 1.250 - - - - - 50.00 - -
d) Overlaps 16 dia. 2 4 1 8 16 0.800 0.800 - - - 6.40 - - - -
20
F) Column C2/F9 & F7 on Grid H2/V8 (0.375*1.200)=1 0.375 1.200 - - - - - - - - -

c) Overlaps 20 dia. 2 20 1 40 25 1.250 1.250 - - - - - 50.00 - -
d) Overlaps 16 dia. 2 4 1 8 16 0.800 0.800 - - - 6.40 - - - -
G) Column C3 /F5 on Grid H4/V7(0.300*0.900)=1 0.300 0.900 - - - - - - - - -
b) Vertical Bars 20 dia. 1 10 1 10 20 0.450 5.860 1 6.270 - - - - 62.70 - - -
c) Overlaps 25 dia. 1 6 1 6 25 1.250 1.250 - - - - - 7.50 - -
d) Overlaps 20 dia. 1 10 1 10 20 1.000 1.000 - - - - 10.00 - - -
f) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 47.00 1 47 8 0.440 0.547 0.150 5 1.057 49.66 - - - - - - -
g) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 1 47.00 1 47 8 0.220 0.150 2 0.338 15.89 - - - - - - -
h) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 47.00 2 94 8 0.220 0.518 0.150 4 0.824 77.49 - - - - - - -
Column C3 / F7 on Grid H4/V7(0.300*0.900)=1 0.300 0.900 - - - - - - - - -
b) Vertical Bars 20 dia. 1 10 1 10 20 0.450 5.910 1 6.320 - - - - 63.20 - - -
c) Overlaps 25 dia. 1 6 1 6 25 1.250 1.250 - - - - - 7.50 - -
d) Overlaps 20 dia. 1 10 1 10 20 1.000 1.000 - - - - 10.00 - - -
f) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 48.00 1 48 8 0.440 0.547 0.150 5 1.057 50.72 - - - - - - -
h) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 48.00 2 96 8 0.220 0.518 0.150 4 0.824 79.14 - - - - - - -
H) Column C4/F3 on Grid H4/V6 (0.450*0.600)=1 0.450 0.600 - - - - - - - - -

b) Overlaps 25 dia. 2 14 1 28 25 1.250 1.250 - - - - - 35.00 - -
f) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 2 44.00 1 88 8 0.370 0.150 2 0.488 42.94 - - - - - - -
I) Column C4/F3 on Grid H6/V6 (0.450*0.600)=1 0.450 0.600 - - - - - - - - -

b) Overlaps 25 dia. 2 14 1 28 25 1.250 1.250 - - - - - 35.00 - -
J) Column C5/F4 on Grids H3/V4 & H4/V4 (0.300*0.600)=2 0.300 0.600 - - - - - - - - -
a) Vertical Bars 20 dia. 2 6 2 24 20 0.450 5.315 1 5.725 - - - - 137.40 - - -
c) Overlaps 20 dia. 2 6 2 24 20 1.000 1.000 - - - - 24.00 - - -
d) Overlaps 16 dia. 2 6 2 24 16 0.800 0.800 - - - 19.20 - - - -
21
g) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 43.00 4 344 8 0.256 0.220 0.150 4 0.562 193.17 - - - - - - -
K) Column C5/F6 on Grids H5/V8 & H6/V8 (0.300*0.600)=2 0.300 0.600 - - - - - - - - -
a) Vertical Bars 20 dia. 2 6 2 24 20 0.450 7.415 7.865 - - - - 188.76 - - -

b) Vertical Bars 16 dia. 2 6 2 24 16 0.450 7.415 7.865 - - - 188.76 - - - -
c) Overlaps 20 dia. 2 6 2 24 20 1.000 1.000 - - - - 24.00 - - -
d) Overlaps 16 dia. 2 6 2 24 16 0.800 0.800 - - - 19.20 - - - -
L) Column C5/F8 on Grids H8/V8 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -

b) Vertical Bars 16 dia. 2 6 1 12 16 0.450 6.875 7.325 - - - 87.90 - - - -
c) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 - - -
d) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - - - -
M) Column C6/F5 on Grid H4/V8 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -

b) Vertical Bars 16 dia. 0 6 1 0 16 - - - - - - - - -
c) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 - - -
d) Overlaps 16 dia. 0 6 1 0 16 - - - - - - - - -
Column C6/F7 on Grid H4/V8 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -

c) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 - - -
d) Overlaps 16 dia. 0 6 1 0 16 - - - - - - - - -
N) Column C7 on Grid X/(V6-V8) (0.300*0.600)=2 0.300 0.600 - - - - - - - - -

a) Vertical Bars 20 dia. 2 12 2 48 20 0.450 5.635 0.300 6.385 - - - - 306.48 - - -
c) Overlaps 20 dia. 2 12 2 48 20 1.000 1.000 - - - - 48.00 - - -
d) Overlaps 16 dia. 0 0 0 0 16 0.800 0.800 - - - - - - - -
22
O) Column C8 on Grid Y/(V6-V8), X/V8 (0.230*0.450)=5 0.230 0.450 - - - - - - - - -
a) Vertical Bars 16 dia. 2 8 5 80 16 0.450 5.665 0.300 6.415 - - - 513.20 - - - -
b) Overlaps 16 dia. 2 8 5 80 16 0.800 0.800 - - - 64.00 - - - -
O) Column C8 At Grid V6/H8 (0.230*0.450)=1 0.230 0.450 - - - - - - - - -
b) Overlaps 16 dia. 2 8 1 16 16 0.800 0.800 - - - 12.80 - - - -
O) Column C8 at Grid X/V6 (0.230*0.450)=1 0.23 0.450 - - - - - - - - -

b) Overlaps 16 dia. 2 8 1 16 16 0.800 0.800 - - - 12.80 - - - -
P) Column SW9/F6 on Grid H5/V7 & H6/V7 (0.230*2.803)=2 0.230 2.803 - - - - - - - - -
a) Vertical Bars 16 dia. 2 16 2 64 16 0.450 7.123 7.573 - - - 484.67 - - - -

b) Vertical Bars 12 dia. @ 150 C/C 2 24.00 2 96 12 0.450 7.123 7.573 - - 727.01 - - - - -
c) Overlaps 16 dia. 2 16 2 64 16 0.800 0.800 - - - 51.20 - - - -
d) Overlaps 12 dia. 2 24 2 96 12 0.600 0.600 - - 57.60 - - - - -
d) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 65.00 2 260 8 0.300 5.446 0.150 5 5.816 1,512.16 - - - - - - -
f) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 2 61.00 2 244 8 0.300 0.247 0.150 2 0.665 162.18 - - - - - - -
Q) Column C10/F7 on Grid H3-H4/V1 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 - - -
d) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 1 49.00 1 49 8 0.220 0.150 2 0.338 16.56 - - - - - - -
e) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 49.00 2 98 8 0.511 0.256 0.150 2 0.885 86.69 - - - - - - -
R) Column CX/F2 At Grid V6/H1 (0.300*0.750)=1 0.300 0.750 - - - - - - - - -
b) Overlaps 20 dia. 2 14 1 28 20 1.000 1.000 - - - - 28.00 - - -
S) Column CX/F9 on Grid H1/F8 (0.300*0.750)=1 0.300 0.750 - - - - - - - - -
b) Overlaps 20 dia. 2 14 1 28 20 1.000 1.000 - - - - 28.00 - - -
- - - - - - - -
TOTAL LENGTH OF BARS IN RMT 14,193.00 - 947.59 1,901.75 1,659.10 2,768.74 - -
@ @ @ @ @ @ @ @
0.395 0.617 0.889 1.580 2.469 3.858 4.870 6.330
23
Total Qty. of Reinforcement. 5,606.236 - 842.409 3,004.762 4,096.318 10,681.8 - -
TOTAL STEEL OF COLUMNS FROM FOUNDATION TO KG 24,231.52

GROUND FLOOR ROOF
STEEL OF COLUMNS FROM BASEMENT FLOOR ROOF TO

2 GF.-1ST FL.
GROUND FLOOR ROOF
HEIGHT=4.00
COVER=40 MM
A) Column C1 (0.375*0.75)=4 0.375 1.200 - - - - - - - - -
a) Vertical Bars 25 dia. 2 28 2 112 25 4.000 4.000 - - - - - 448.00 - -
b) Overlaps 25 dia. 2 28 2 112 25 1.250 1.250 - - - - - 140.00
d) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 30.00 2 120 8 0.197 2.240 0.150 5 2.507 300.80 - - - - - - -
e) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 8 480 8 0.590 0.249 0.150 5 0.909 436.27 - - - - - -
A) Column C1 (0.375*0.75)=4 0.375 1.200 - - - - - - - - -
b) Overlaps 25 dia. 2 28 2 112 25 1.250 1.250 - - - - - 140.00
B) Column C2(0.375*0.750)=2 0.375 1.200 - - - - - - - - -
b) Vertical Bars 16 dia. 2 4 2 16 16 4.000 4.000 - - - 64.00 - - - -
c) Overlaps 25 dia. 2 20 2 80 25 1.250 1.250 - - - - - 100.00
d) Overlaps 16 dia. 2 4 2 16 16 0.800 0.800 - - - 12.80 - -
g) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 8 480 8 0.590 0.249 0.150 5 0.909 436.27 - - - - - -
C) Column C3 (0.300*0.900)=1 0.300 0.900 - - - - - - - - -
b) Vertical Bars 20 dia. 2 10 1 20 20 4.000 4.000 - - - - 80.00 - - -
c) Overlaps 25 dia. 2 6 1 12 25 1.250 1.250 - - - - - 15.00
d) Overlaps 20 dia. 2 10 1 20 20 1.000 1.000 - - - - 20.00 -
f) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 1 60 8 0.440 0.547 0.150 5 1.057 63.40 - - - - - -
h) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 2 120 8 0.220 0.518 0.150 2 0.856 102.76 - - - - - -
D) Column C4 (0.450*0.600)=2 0.450 0.600 - - - - - - - - -
a) Vertical Bars 25 dia. 2 14 2 56 25 4.000 0.300 4.300 - - - - - 240.80 - -
b) Overlaps 25 dia. 2 14 2 56 25 1.250 1.250 - - - - - 70.00
E) Column C5 (0.300*0.600)=5 0.300 0.600 - - - - - - - - -
a) Vertical Bars 20 dia. 2 6 4 48 20 4.000 4.000 - - - - 192.00 - - -
c) Overlaps 20 dia. 2 6 4 48 20 1.000 1.000 - - - - 48.00 -
24
d) Overlaps 16 dia. 2 6 4 48 16 0.800 0.800 - - - 38.40 - -
g) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 8 480 8 0.256 0.220 0.150 2 0.594 284.90 - - - - - -
E) Column C5 (0.300*0.600)=5 0.300 0.600 - - - - - - - - -
c) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 -
d) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - -
F) Column C6 (0.300*0.600)=1 0.30 0.60 - - - - - - - - -
c) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 -
d) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - -
G) Column SW9 (0.230*2.803)=2 0.230 2.803 - - - - - - - - -
a) Vertical Bars 16 dia. 2 16.00 2 64 16 4.000 4.000 - - - 256.00 - - - -
b) Vertical Bars 12 dia. @ 150 C/C 2 24.00 2 96 12 4.000 4.000 - - 384.00 - - - - -
c) Overlaps 16 dia. 2 16 2 64 16 0.800 0.800 - - - 51.20 - -
d) Overlaps 12 dia. 2 24 2 96 12 0.600 0.600 - - 57.60 - - -
H) Column C10 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 -
e) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 30.00 2 60 8 0.511 0.256 0.150 2 0.885 53.08 - - - - - -
- - - - - - - - -
TOTAL LENGTH OF BARS IN RMT 6,660.88 - 441.60 729.60 520.00 1,969.80 - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.889 1.580 2.469 3.858 4.870 6.330
TOTAL STEEL OF COLUMNS FROM BASEMENT FLOOR

KG 13,059.77
ROOF TO GROUND FLOOR ROOF
3 STEEL OF COLUMNS FROM GROUND FLOOR ROOF TO 1ST FL.-2ND

FIRST FLOOR ROOF FL.
HEIGHT=4.00
COVER=40 MM
A) Column C1 (0.375*0.75)=4 0.375 1.200 - - - - - - - - -
25
b) Overlaps 25 dia. 2 28 2 112 25 1.250 1.250 - - - - - 140.00
A) Column C1 (0.375*0.75)=4 0.375 1.200 - - - - - - - - -
b) Overlaps 25 dia. 2 28 2 112 25 1.250 1.250 - - - - - 140.00
B) Column C2(0.375*0.750)=2 0.375 1.200 - - - - - - - - -
c) Overlaps 25 dia. 2 20 2 80 25 1.250 1.250 - - - - - 100.00
d) Overlaps 16 dia. 2 4 2 16 16 0.800 0.800 - - - 12.80 - -
C) Column C3 (0.300*0.900)=1 0.300 0.900 - - - - - - - - -
c) Overlaps 25 dia. 2 6 1 12 25 1.250 1.250 - - - - - 15.00
d) Overlaps 20 dia. 2 10 1 20 20 1.000 1.000 - - - - 20.00 -
h) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 2 120 8 0.220 0.518 0.150 2 0.856 102.76 - - - - - -
D) Column C4 (0.450*0.600)=2 0.450 0.600 - - - - - - - - -
a) Vertical Bars 25 dia. 0 14 2 0 25 4.000 4.000 - - - - - - - -
b) Overlaps 25 dia. 0 14 2 0 25 1.250 1.250 - - - - - -
c) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 0 36.00 2 0 8 0.740 1.040 0.150 5 1.850 - - - - - - - -
d) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 0 36.00 2 0 8 0.247 1.040 0.150 5 1.357 - - - - - - - -
e) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 0 36.00 2 0 8 0.740 0.520 0.150 5 1.330 - - - - - - -
f) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 0 36.00 2 0 8 0.370 0.150 2 0.488 - - - - - - - -
E) Column C5 (0.300*0.600)=5 0.300 0.600 - - - - - - - - -
c) Overlaps 20 dia. 2 6 4 48 20 1.000 1.000 - - - - 48.00 -
d) Overlaps 16 dia. 2 6 4 48 16 0.800 0.800 - - - 38.40 - -
E) Column C5 (0.300*0.600)=5 0.300 0.600 - - - - - - - - -
c) Overlaps 20 dia. 2 6 2 24 20 1.000 1.000 - - - - 24.00 -
d) Overlaps 16 dia. 2 6 2 24 16 0.800 0.800 - - - 19.20 - -
F) Column C6 (0.300*0.600)=1 0.30 0.60 - - - - - - - - -
c) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 -
26
d) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - -
G) Column SW9 (0.230*2.803)=2 0.230 2.803 - - - - - - - - -
a) Vertical Bars 16 dia. 2 16 2 64 16 4.000 4.000 - - - 256.00 - - - -
b) Vertical Bars 12 dia. @ 150 C/C 2 24 2 96 12 4.000 4.000 - - 384.00 - - - - -
c) Overlaps 16 dia. 2 16 2 64 16 0.800 0.800 - - - 51.20 - -
d) Overlaps 12 dia. 2 24 2 96 12 0.600 0.600 - - 57.60 - - -
H) Column C10 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 -
e) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 30.00 2 60 8 0.511 0.256 0.150 2 0.885 53.08 - - - - - -
- - - - - - - - -
TOTAL LENGTH OF BARS IN RMT 6,500.88 - 441.60 883.20 488.80 1,692.60 - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.889 1.580 2.469 3.858 4.870 6.330
TOTAL STEEL OF COLUMNS FROM GROUND FLOOR ROOF

KG 12,092.78
TO FIRST FLOOR ROOF
STEEL OF COLUMNS FROM FIRST FLOOR ROOF TO 2ND FL.-

4
SECOND FLOOR ROOF TERRACE
HEIGHT=4.00
COVER=40 MM
A) Column C1 (0.375*0.75)=2 0.375 1.200 - - - - - - - - -
b) Overlaps 25 dia. 2 28 2 112 25 1.250 1.250 - - - - - 140.00
B) Column C2(0.375*0.750)=2 0.375 1.200 - - - - - - - - -
c) Overlaps 25 dia. 2 20 2 80 25 1.250 1.250 - - - - - 100.00
d) Overlaps 16 dia. 2 4 2 16 16 0.800 0.800 - - - 12.80 - -
C) Column C3 (0.300*0.900)=1 0.300 0.900 - - - - - - - - -
c) Overlaps 25 dia. 2 6 1 12 25 1.250 1.250 - - - - - 15.00
d) Overlaps 20 dia. 2 10 1 20 20 1.000 1.000 - - - - 20.00 -
27
h) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 2 120 8 0.600 0.150 2 0.718 86.16 - - - - - -
D) Column C5 (0.300*0.600)=2 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 2 6 2 24 20 1.000 1.000 - - - - 24.00 -
c) Overlaps 16 dia. 2 6 2 24 16 0.800 0.800 - - - 19.20 - -
e) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 2 120 8 0.220 0.150 2 0.338 40.56 - - - - - - -
f) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 4 240 8 0.580 0.150 2 0.698 167.52 - - - - - -
E) Column C5 (0.300*0.600)=1 on Grid (H4/V4) 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 -
c) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - -
e) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 2 36.00 1 72 8 0.220 0.150 2 0.338 24.34 - - - - - - -
f) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 36.00 2 144 8 0.580 0.150 2 0.698 100.51 - - - - - -
F) Column C6 (0.300*0.600)=1 0.30 0.60 - - - - - - - - -
c) Overlaps 20 dia. 2 6 1 12 20 1.000 1.000 - - - - 12.00 -
d) Overlaps 16 dia. 2 6 1 12 16 0.800 0.800 - - - 9.60 - -
g) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 30.00 2 120 8 0.580 0.150 2 0.698 83.76 - - - - - -
G) Column SW9 (0.230*2.803)=2 0.230 2.803 - - - - - - - - -
b) Vertical Bars 12 dia. @ 150 C/C 2 24 2 96 12 4.000 4.000 - - 384.00 - - - - -
28
c) Overlaps 16 dia. 2 16 2 64 16 0.800 0.800 - - - 51.20 - -
d) Overlaps 12 dia. 2 24 2 96 12 0.600 0.600 - - 57.60 - - -
H) Column C10 (0.300*0.600)=1 0.300 0.600 - - - - - - - - -
b) Overlaps 20 dia. 1 12 1 12 20 1.000 1.000 - - - - 12.00 -
e) Diagonal Ring Bar 8 dia @ 100 MM & 125 MM c/c 1 30.00 2 60 8 0.580 0.150 2 0.698 41.88 - - - - - -
I) Stub Column SC1 (0.375*0.750)=1 0.300 0.750 - - - - - - - - -
b) Overlaps 25 dia. 2 16 1 32 25 1.250 1.250 - - - - - 40.00
J) Stub Column SC2 (0.375*0.600)=2 0.375 0.600 - - - - - - - - -
b) Overlaps 25 dia. 2 14 2 56 25 1.250 1.250 - - - - - 70.00
5 STEEL OF LIFT FRONT WALLS

FROM BASEMENT FLOOR TO TERRACE FLOOR =4 NOS
L=1.675-1.018=657 MM 1.147 2.425
a) Horizontal Bars 10 MM dia. @ 100 MM c/c 2 25 4 202 10 1.107 1.107 - 223.61 - - - - - -
b) Vertical Bars 10 MM dia. @ 100 MM c/c 2 12 4 100 10 2.025 2.025 - 202.01 - - - - - -
c) STEEL OF LINTEL AT TOP 0.15 0.150
Bottom Bars 10MM dia. 2 2 4 16 10 0.100 2.160 0.100 2.360 - 37.76 - - - - - -
Top Bars 10 MM dia. 2 2 4 16 10 0.100 2.160 0.100 2.360 - 37.76 - - - - - -
Main Ring Bar 8 dia @ 150 M (2L) (230*450) 2 16 5 158 8 0.220 0.180 0.160 5 0.480 75.84 - - - - - - -
STEEL OF COLUMNS FROM MUMTY FLOOR ROOF TO

6
MACHINE ROOM TOP
HEIGHT=1.750
COVER=40 MM
A) Column SW9 (0.230*2.803)=2 0.230 2.803 - - - - - - - - -
b) Vertical Bars 12 dia. @ 150 C/C 2 13 2 51 16 1.670 1.670 - - - 84.75 - - - -
c) Main Ring Bar 8 dia @ 100 MM & 125 MM C/C 2 15 2 60 8 0.300 5.446 0.160 5 5.826 349.56 - - - - - - -
d) Mid Ring Bar 8 dia @ 100 MM & 125 MM c/c 2 15 4 120 8 0.300 0.547 0.160 5 0.927 111.20 - - - - - -
e) Mid Ring (Hook) Bar 8 dia @ 100 MM & 125 MM c/c 2 15 2 60 8 0.300 0.273 0.160 2 0.701 42.08 - - - - - - -
- - - - - - - - -
TOTAL LENGTH OF BARS IN RMT 6,053.36 501.15 441.60 881.55 362.88 1,598.96 - - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
29
Total Qty. of Reinforcement. 2,391.076 309.208 392.141 1,391.081 894.862 6,162.4 - -
TOTAL STEEL OF COLUMNS FROM FIRST FLOOR ROOF TO KG 11,540.76

SECOND FLOOR ROOF
30
AREA = TOTAL MT 35.395
PROJECT0
CLIENT:-
WORK:- STEEL OF BASEMENT FLOOR ROOF
Reinforcement Steel
No of Nos. of Nos. Total No. Of Cutting Total Length of Bar Dai wise
BASEMENT FLOOR ROOF
VILLAS
A) STEEL OF BEAMS -
COVER=30 MM
a) Bems B1 (375*600)=1 0.375 0.600 -
Bottom Bars 25 MM dia. 2 4 1 8 25 0.400 11.372 0.400 2 12.072 - - - - - 96.58 -

Overlaps 25 MM dia. at Bottom 2 4 1 8 25 1.250 1.250 - - - - - 10.00 -
Bottom Extra Bars 25 MM 2 4 1 8 25 8.932 8.932 - - - - - 71.46 -
Spacer Bars 25 MM dia. At Bottom 0 10 1 0 25 0.315 0.315 - -
Top Bars 25 MM dia. 2 4 1 8 25 0.400 11.712 0.400 2 12.412 - - - - - 99.30 -
Overlaps 25 MM dia. At Top 2 4 1 8 25 1.250 1.250 - - - - - 10.00 -
Top Extra Bars 25 MM (Left)/V1 2 4 1 8 25 0.400 3.140 1 3.490 - - - - - 27.92 -
Top Extra Bars 20 MM (Right)/V3 2 4 1 8 20 3.140 0.400 1 3.500 - - - - 28.00 - -
Spacer Bars 25 MM dia. At Top 0 3 2 0 25 0.315 0.315 - -
Main Outer Ring Bar 8 dia @ 100 MM and 200 2 86.00 1 172 8 0.630 1.080 0.150 5 1.780 306.16 - - - - - - -
MM c/c (4L)
Main Inner Ring Bar 8 dia @ 100 MM and 200
2 86.00 1 172 8 0.210 1.080 0.150 5 1.360 233.92 - - - - - - -
MM c/c (4L)
b) Bems B2 (600*600)=1 0.600 0.600 -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.692 0.400 2 12.392 - - - - - 148.70 -
600 Overlaps 25 MM dia. At Top 2 6 1 12 25 1.250 1.250 - - - - - 15.00 -
540 Top Extra Bars 25 MM (Left)/V1 2 6 1 12 25 0.400 3.215 1 3.565 - - - - - 42.78 -
515 Top Extra Bars 25 MM (Right)/V3 2 6 1 12 25 3.215 0.400 1 3.565 - - - - - 42.78 -
103 Spacer Bars 25 MM dia. At Top 0 3 2 0 25 0.540 0.540 - -
309 Main Outer Ring Bar 10 dia @ 100 MM and 150 2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - - -
MM c/c (6L)
334 Main Inner Ring Bar 10 dia @ 100 MM and 150 2 94.00 1 188 10 0.668 1.080 0.200 5 1.848 - 347.42 - - - - - -
MM c/c (6L)
668 2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - - -
MM c/c (6L)
c) Bems B3 (600*600)=1 0.600 0.600 -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
31
Top Extra Bars 25 MM (Right)/V3 2 6 1 12 25 3.215 0.400 1 3.565 - - - - - 42.78 -
Main Outer Ring Bar 10 dia @ 100 MM and 150 2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - - -
MM c/c (6L)
2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - - -
MM c/c (6L)
Main Inner Ring Bar 10 dia @ 100 MM and 150 2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - - -
MM c/c (6L)
d) Bems B4 (300*600) & (450*450)=1 0.300 0.600 0.450 0.450 -
Bottom Extra Bars 20 MM 2 5 1 10 20 4.792 4.792 - - - - 47.92 - -
Top Bars 25 MM dia. 2 3 1 6 25 0.400 11.712 0.250 2 12.262 - - - - - 73.57 -
Top Bars 25 MM dia. 2 2 1 4 25 0.400 7.659 0.250 1 8.259 - - - - - 33.04 -
Top Extra Bars 16 MM (Left)/V1 2 3 1 6 16 0.400 1.240 1 1.608 - - - 9.65 - - -
Top Extra Bars 25 MM (Center)/V2 2 3 1 6 25 3.800 3.800 - - - - - 22.80 -
Top Extra Bars 25 MM (Center)/V2 2 2 1 4 25 0.400 2.740 1 3.090 - - - - - 12.36 -
MM c/c (2L) (300*600)
Main Outer Ring Bar 10 dia @ 100 MM and 150
2 58.00 1 116 10 0.780 0.780 0.200 5 1.660 - 192.56 - - - - - -
MM c/c (2L) (450*450)
e) Bems B5 (230*450)=1 0.230 0.45 -
Bottom Bars 16 MM dia. 2 3 1 6 16 0.390 5.581 0.390 2 6.297 - - - 37.78 - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.390 5.581 0.390 2 6.297 - - - 37.78 - - -
Main Ring Bar 8 dia @ 125 MM c/c (2L) 2 17.00 1 34 8 0.340 0.780 0.150 5 1.190 40.46 - - - - - - -
f) Bems B6 (230*600) & (300*600)=1 0.300 0.600 0.375 - - - -

Bottom Bars 25 MM dia. 2 3 1 6 25 0.400 11.712 0.400 2 12.412 - - - - - 74.47 - -
Overlaps 25 MM dia. at Bottom 2 3 1 6 25 1.250 1.250 - - - - - 7.50 - -
Bottom Bars 25 MM dia. (V2-V3) 2 1 1 2 25 0.400 7.364 0.400 2 8.064 - - - - - 16.13 - -
Bottom Extra Bars 25 MM 2 4 1 8 25 7.953 7.953 - - - - - 63.62 - -
Spacer Bars 25 MM dia. At Bottom 0 9 1 0 25 0.315 0.315 - - - - -
Top Bars 25 MM dia. 2 3 1 6 25 0.400 11.712 0.400 2 12.412 - - - - - 74.47 - -
Overlaps 25 MM dia. At Top 2 3 1 6 25 1.250 1.250 - - - - - 7.50 - -
Top Bars 25 MM dia. (V2-V3) 2 1 1 2 25 0.400 7.364 0.400 2 8.064 - - - - - 16.13 - -
Top Extra Bars 25 MM (Left)/V1 2 3 1 6 25 0.400 7.364 1 7.714 - - - - - 46.28 - -
Top Extra Bars 25 MM (Right)/V3 2 1 1 2 25 2.412 0.400 1 2.762 - - - - - 5.52 - -
Spacer Bars 25 MM dia. At Top 0 3 2 0 25 0.315 0.315 - - - - -
Main Outer Ring Bar 10 dia @ 100 MM c/c (2L) 2 13.00 1 26 10 0.480 1.080 0.200 5 1.660 - 43.16 - - - - - -
(230*600)
MM c/c (2L) (300*600)
2 59.00 1 118 10 0.627 1.080 0.200 5 1.807 - 213.19 - - - - - -
MM c/c (2L) (300*600)
g) Bems B7 (600*675)=1 0.600 0.675 - -
32
Spacer Bars 25 MM dia. At Bottom 0 9 1 0 25 0.540 0.540 - - - -
Top Bars 25 MM dia. 2 7 1 14 25 0.400 11.712 0.400 2 12.412 - - - - - 173.77 - -
Spacer Bars 25 MM dia. At Top 0 3 2 0 25 0.540 0.540 - - - -
2 91.00 1 182 10 1.080 1.230 0.200 5 2.410 - 438.62 - - - - - -
MM c/c (6L)
2 91.00 1 182 10 0.720 1.230 0.200 5 2.050 - 373.10 - - - - - -
MM c/c (6L)
2 91.00 1 182 10 0.360 1.230 0.200 5 1.690 - 307.58 - - - - - -
MM c/c (6L)
h) Bems B8 (600*450)=1 0.600 0.450 - - -
Top Bars 25 MM dia. 2 5 1 10 25 0.300 9.867 0.300 2 10.367 - - - - - 103.67 - -
Top Extra Bars 25 MM at Center 2 5 1 10 25 3.200 3.200 - - - - - 32.00 - -
MM c/c (4L)
2 71.00 1 142 8 0.540 0.780 0.150 5 1.390 197.38 - - - - - - -
MM c/c (4L)
i) Bems B9 (230*450)=2 (LIFTS) 0.230 0.450 - - - - - - -
Bottom Bars 16 MM dia. 2 3 2 12 16 0.300 2.560 0.300 2 3.096 - - - 37.15 - - - -
Top Bars 16 MM dia. 2 3 2 12 16 0.300 2.560 0.300 2 3.096 - - - 37.15 - - - -
j) Bems B10 (600*450)=1 0.600 0.450 - - - - - - - -

Spacer Bars 25 MM dia. At Bottom 0 9 1 0 25 0.540 0.540 - - - - - - - -
Top Bars 25 MM dia. 2 5 1 10 25 0.300 10.394 0.300 2 10.894 - - - - - 108.94 - -
Top Extra Bars 25 MM at Joint X 2 5 1 10 25 0.300 2.700 1 2.950 - - - - - 29.50 - -
Spacer Bars 25 MM dia. At Top 0 3 1 0 25 0.540 0.540 - - - - - - - -
MM c/c (4L)
2 73.00 1 146 10 0.540 0.780 0.200 5 1.420 - 207.32 - - - - - -
MM c/c (4L)
k) Bems B11 (230*600)=1 0.230 0.600 - - - - - - - -
Bottom Extra Bars 16 MM 2 3 1 6 16 2.840 2.840 - - - 17.04 - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.400 6.927 0.400 2 7.663 - - - 45.98 - - - -
Top Extra Bars 16 MM at Joint H1 2 3 1 6 16 0.400 3.757 1 4.125 - - - 24.75 - - - -
33
Top Extra Bars 16 MM at Joint Y 2 3 1 6 16 1.330 0.400 1 1.698 - - - 10.19 - - - -
MM c/c (2L)
l) Bems B12 (375*600)=1 0.375 0.600 - - - -
Bottom Bars 20 MM dia. 2 4 1 8 20 0.400 12.750 0.400 2 13.470 - - - - 107.76 - - -
Overlaps 20 MM dia. at Bottom 2 4 1 8 20 1.000 1.000 - - - - 8.00 - - -
Bottom Extra Bars 20 MM 2 4 1 8 20 3.725 3.725 - - - - 29.80 - - -
Spacer Bars 25 MM dia. At Bottom 0 9 1 0 25 0.315 0.315 - - - - - -
Top Bars 20 MM dia. 2 4 1 8 20 0.400 12.750 0.400 2 13.470 - - - - 107.76 - - -
Overlaps 20 MM dia. At Top 2 4 1 8 20 1.000 1.000 - - - - 8.00 - - -
Top Extra Bars 20 MM (Left)/H4 2 4 1 8 20 0.400 1.990 1 2.350 - - - - 18.80 - - -
Top Extra Bars 20 MM (Center)/H2 2 4 1 8 20 3.700 2.520 - - - - 20.16 - - -
Spacer Bars 25 MM dia. At Top 0 5 1 0 25 0.315 0.315 - - - - - -
2 89.00 1 178 8 0.630 1.080 0.150 5 1.780 316.84 - - - - - - -
MM c/c (4L)
2 89.00 1 178 8 0.210 1.080 0.150 5 1.360 242.08 - - - - - - -
MM c/c (4L)
m) Bems B13 (375*600)=1 0.375 0.600 0.600 0.450 - - - - - -
Bottom Bars 25 MM dia. 2 6 1 12 25 1.250 9.439 0.300 1 10.939 - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.400 16.371 0.300 2 16.971 - - - - - 135.77 - -
Top Bars 25 MM dia. 2 2 1 4 25 0.400 9.765 0.300 2 10.365 - - - - - 41.46 - -
Overlaps 25 MM dia. at Top 0 4 1 0 25 1.250 1.250 - - - - - - - -
Top Extra Bars 25 MM (Center) /H6 2 4 1 8 25 4.375 4.375 - - - - - 35.00 - -
Top Extra Bars 25 MM (Center)/H6 2 2 1 8 25 0.400 2.675 3.075 - - - - 20.16 - - -
MM c/c (4L) (375*600)
MM c/c (4L)
2 69.00 1 138 10 1.080 0.780 0.200 5 1.960 - 270.48 - - - - - -
MM c/c (4L) (600*450)
MM c/c (4L)
2 69.00 1 138 10 0.216 0.780 0.200 5 1.096 - 151.25 - - - - - -
MM c/c (4L)
n) Bems B14 (600*450)=1 0.600 0.450 - - - -
Top Bars 25 MM dia. 2 6 1 12 25 0.300 10.377 0.300 2 10.877 - - - - - 130.52 - -
Top Extra Bars 25 MM (Left)/X 2 5 1 10 25 0.300 2.785 1 3.035 - - - - - 30.35 - -
34
2 73.00 1 146 10 1.080 0.780 0.200 5 1.960 - 286.16 - - - - - -
MM c/c (4L)
2 73.00 1 146 10 0.648 0.780 0.200 5 1.528 - 223.09 - - - - - -
MM c/c (4L)
o) Flat Beam FB1 (300*175)=1 0.300 0.175 -

Bottom Bars 20 MM dia. 2 3 1 6 20 0.117 4.645 0.117 2 4.798 - - - - 28.79 - -
Top Bars 20 MM dia. 2 3 1 6 20 0.117 4.645 0.117 2 4.799 - - - - 28.79 - -
p) Flat Beam FB2 (450*230)=1 0.450 0.230 -

Top Bars 25 MM dia. 2 3 1 6 25 0.153 6.681 0.153 2 6.887 - - - - - 41.32 -
Top Bars 20 MM dia. 2 2 1 4 20 0.153 6.681 0.153 2 6.907 - - - - 27.63 - -
Main Ring Bar 10 dia @ 150 MM c/c (4L) 2 40.00 1 80 10 0.780 0.340 0.200 5 1.220 - 97.60 - - - - - -
Main Inner Ring Bar 10 dia @ 150 MM c/c (2L) 2 40.00 1 80 8 0.390 0.340 0.150 5 0.800 64.00 - - - - - - -
q) Plinth Beam PB-01 (230*450)=2 0.230 0.450 - - - - - - - -

Top Bars 16 MM dia. 2 3 2 12 16 0.300 5.029 0.300 2 5.565 - - - 66.78 - - - -
Top Extra Bars 16 MM at Joint V3 2 3 2 12 16 0.300 1.440 1 1.708 - - - 20.50 - - - -
Top Extra Bars 16 MM at Joint V4 2 3 2 12 16 1.740 0.300 1 2.008 - - - 24.10 - - - -
2 32.00 2 128 8 0.340 0.780 0.150 5 1.190 152.32 - - - - - - -
MM c/c (2L)
r) Plinth Beam PB-02 (230*450)=1 0.230 0.45 - - - - - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.300 6.169 0.300 2 6.705 - - - 40.23 - - - -
2 38.00 1 76 8 0.340 0.780 0.150 5 1.190 90.44 - - - - - - -
MM c/c (2L)
- -
B) STEEL OF SLAB - - - - - - - -
COVER=20 MM - - -
a) Slab S1 (5.274*9.040)=1 5.174 8.940 - - - - - - - -
12 MM dia. Main Bars (a) @ 125 MM C/C Alt.
68.00 2 34.00 1 68 12 6.044 6.044 - - 410.99 - - - - -
Bent Back
35.00 12 MM dia. Main Bars (a) @ 125 MM C/C Alt. 2 34.00 1 68 12 6.044 6.044 - - 410.99 - - - - -
Bent Back
12 MM dia. Cross Bars (b) @ 150 MM C/C Alt. 2 18.00 1 36 12 11.369 11.369 - - 409.28 - - - - -
Bent Back
35
Bent Back
12 MM dia. Extra Bars Bars © @ 125 MM C/C 2 33.00 1 66 12 0.100 1.507 1 1.595 - - 105.24 - - - - -
Alt. Bent Back (Double Spacing) (H4-H5)/V6
12 MM dia. Extra Bars Bars © @ 125 MM C/C
2 33.00 1 66 12 0.100 1.507 1 1.595 - - 105.24 - - - - -
Alt. Bent Back (Double Spacing) on Beam B13
8 MM dia. Binders @ 200 MM C/C 2 9.00 2 36 8 3.164 3.164 113.92 - - - - - - -
12 MM dia. Chairs 0 46 1 0 12 0.436 0.600 0.456 4 1.335 - - - - - - - -

b) Slab S2 (7.235*6.135)=1 5.854 6.035 - - - - - - - -
Bent Back
Bent Back
12 MM dia. Main Bars (a) @ 125 MM C/C Alt. 2 5.00 1 10 12 8.424 8.424 - - 84.24 - - - - -
Bent Back
12 MM dia. Main Bars (a) @ 125 MM C/C Alt. 2 5.00 1 10 12 7.125 7.125 - - 71.25 - - - - -
Bent Back
Bent Back
Bent Back
12 MM dia. Extra Bars Bars © @ 150 MM C/C 2 19.00 1 38 12 0.100 2.009 1 2.097 - - 79.68 - - - - -
Alt. Bent Back (Double Spacing) (H3-H4)/V6
12 MM dia. Chairs 0 35 1 0 12 0.411 0.600 0.411 4 1.374 - - - - - - - -
c) Slab S3 (7.235*6.135)=1 7.135 4.975 - - - - - - - - -
10 MM dia. Main Bars @ 125 MM C/C Alt. Bent
57.00 2 29.00 1 58 10 7.779 7.779 - 451.17 - - - - - -
Back
34.00 10 MM dia. Main Bars @ 125 MM C/C Alt. Bent 2 28.00 1 56 10 6.665 6.665 - 373.27 - - - - - -
Back
10 MM dia. Cross Bars @ 150 MM C/C Alt. Bent 2 17.00 1 34 10 7.780 7.780 - 264.52 - - - - - -
Back
10 MM dia. Cross Bars @ 150 MM C/C Alt. Bent
2 17.00 1 34 10 8.761 8.761 - 297.88 - - - - - -
Back
10 MM dia. Extra Bars © @ 150 MM C/C Alt. 2 16.00 1 32 10 0.100 2.009 1 2.099 - 67.16 - - - - - -
Bent Back (Double Spacing) (H1-H2)/V6
10 MM dia. Extra Bars © @ 125 MM C/C Alt.
0 29 1 0 10 0.100 1.869 1 1.959 - - - - - - - -
Bent Back (Double Spacing) on Beam B2
12 MM dia. Chairs 0 35 1 0 12 0.405 0.600 0.405 4 1.362 - - - - - - - -
d) Slab S3 (5.499*6.081)=1 5.399 5.981 - - - - - - - - -
Back
36.00 2 24.00 1 48 10 6.044 6.044 - 290.11 - - - - - -
Back
2 18.00 1 36 10 6.921 6.921 - 249.16 - - - - - -
Back
2 18.00 1 36 10 6.921 6.921 - 249.16 - - - - - -
Back
2 23.00 1 46 10 0.100 1.550 1 1.640 - 75.43 - - - - - -
36

12 MM dia. Chairs 0 32 1 0 12 0.405 0.600 0.405 4 1.362 - - - - - - - -
e) Slab S4 (7.189*1.682)=1 7.189 1.682 - - - - - - - - -
42.00 10 MM dia. Main Bars Bars @ 175 MM C/C 2 21.00 1 42 10 2.597 2.597 - 109.07 - - - - - -
9.00 10 MM dia. Main Bars Bars @ 175 MM C/C 2 21.00 1 42 10 3.896 3.896 - 163.62 - - - - - -
10 MM dia. Cross Bars Bars @ 200 MM C/C 2 5.00 1 10 10 7.589 7.589 - 75.89 - - - - - -
10 MM dia. Cross Bars Bars @ 200 MM C/C 2 4.00 1 8 10 8.202 8.202 - 65.62 - - - - - -

12 MM dia. Chairs 0 12 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
f) Slab S4 (2.453*1.682)=1 2.453 1.682 - - - - - - - - -
14.00 10 MM dia. Main Bars @ 175 MM C/C 2 7.00 1 14 10 3.896 3.896 - 54.54 - - - - - -
9.00 10 MM dia. Main Bars @ 175 MM C/C 2 7.00 1 14 10 2.743 2.743 - 38.40 - - - - - -
10 MM dia. Cross Bars @ 200 MM C/C 2 5.00 1 10 10 2.853 2.853 - 28.53 - - - - - -
12 MM dia. Chairs 0 4 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
g) Slab S4 (3.765*5.075)=1 3.765 5.075 - - - - - - - - -
Back
Back
2 10.00 1 20 10 6.665 6.665 - 133.31 - - - - - -
Back
Back
10 MM dia. Extra Bars © @ 200 MM C/C Alt. 0 10 1 0 10 0.100 1.869 1 1.959 - - - - - - - -
2 14.00 1 28 10 0.100 1.141 1 1.231 - 34.48 - - - - - -
12 MM dia. Chairs 0 19 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

h) Slab S4 (3.765*6.285)=1 3.765 6.285 - - - - - - - - -
36.00 2 18.00 1 36 10 4.310 4.310 - 155.16 - - - - - -
Back
19.00 10 MM dia. Main Bars Bars @ 175 MM C/C Alt. 2 18.00 1 36 10 6.149 6.149 - 221.36 - - - - - -
Bent Back
2 10.00 1 20 10 7.125 7.125 - 142.50 - - - - - -
Back
Back
37
12 MM dia. Chairs 0 24 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
h) Slab S4 (1.395*2.150)=1 1.359 2.150 - - - - - - - - -
10 MM dia. Main Bars @ 175 MM C/C 2 13.00 1 26 10 2.129 2.129 - 55.35 - - - - - -
12 MM dia. Chairs 0 3 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

i) Slab S5 (6.018*3.324)=1 6.018 3.324 - - - - - - - - -
35.00 2 18.00 1 36 10 4.464 4.464 - 160.70 - - - - - -
Back
Bent Back
2 9.00 1 18 10 6.788 6.788 - 122.18 - - - - - -
Back
2 8.00 1 16 10 7.448 7.448 - 119.16 - - - - - -
Back
Bent Back (Double Spacing) on Grid V6 on Beam 2 8.00 1 16 10 0.100 1.705 1 1.795 - 28.71 - - - - - -
BB1
2 17.00 1 34 10 0.100 1.401 1 1.491 - 50.69 - - - - - -
12 MM dia. Chairs 0 20 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
j) Slab S5 (2.518*3.324)=1 2.518 3.324 - - - - - - - - -
Back
Bent Back
2 7.00 1 14 10 4.464 4.464 - 62.50 - - - - - -
Back
Back
2 6.00 1 12 10 0.100 1.401 1 1.491 - 17.89 - - - - - -
12 MM dia. Chairs 0 8 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
k) Slab S5 (2.518*5.740)=1 2.518 5.740 - - - - - - - - -
33.00 2 17.00 1 34 10 3.658 3.658 - 124.37 - - - - - - 1.148 1.098
Back
10 MM dia. Main Bars Bars @ 175 MM C/C Alt.
13.00 2 16.00 1 32 10 5.193 5.193 - 166.16 - - - - - - 0.648
Bent Back
10 MM dia. Cross Bars @ 200 MM C/C Alt. Bent 2 7.00 1 14 10 6.510 6.510 - 91.14 - - - - - - 5.49
Back
2 6.00 1 12 10 7.371 7.371 - 88.45 - - - - - -
Back
38
10 MM dia. Extra Bars Bars © @ 200 MM C/C 2 6.00 1 12 10 0.100 1.635 1 1.725 - 20.70 - - - - - -
Alt. Bent Back (Double Spacing) on Beam BB1
12 MM dia. Chairs 0 14 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

l) Slab S6 (6.018*5.740)=1 6.018 5.740 - - - - - - - - -
Back
39.00 2 24.00 1 48 10 7.361 7.361 - 353.33 - - - - - -
Back
10 MM dia. Cross Bars Bars @ 150 MM C/C Alt. 2 20.00 1 40 10 6.788 6.788 - 271.52 - - - - - -
Bent Back
10 MM dia. Cross Bars Bars @ 150 MM C/C Alt.
2 19.00 1 38 10 7.448 7.448 - 283.01 - - - - - -
Bent Back
Bent Back (Double Spacing) on Grid V6 on Beam 2 19.00 1 38 10 0.100 1.705 1 1.795 - 68.19 - - - - - -
BB1
2 23.00 1 46 10 0.100 1.635 1 1.725 - 79.35 - - - - - -
Alt. Bent Back (Double Spacing) on Beam BB1
12 MM dia. Chairs 0 35 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -
m) Slab S7 (6.018*5.740)=1 5.499 6.081 - - - - - - - - -
41.00 12 MM dia. Main Bars @ 150 MM C/C Alt. Bent 2 21.00 1 42 12 8.704 8.704 - - 365.57 - - - - -
Back
37.00 2 20.00 1 40 12 7.275 7.275 - - 291.00 - - - - -
Back
12 MM dia. Cross Bars @ 150 MM C/C Alt. Bent 2 19.00 1 38 12 6.626 6.626 - - 251.79 - - - - -
Back
2 18.00 1 36 12 8.031 8.031 - - 289.11 - - - - -
Back
Bent Back (Double Spacing) on Grid V6 on Beam 2 20.00 1 40 12 0.100 1.945 1 2.033 - - 81.31 - - - - -
BB1 (H6-H7)
2 18.00 1 36 12 0.100 1.720 1 1.808 - - 65.10 - - - - -
12 MM dia. Chairs 0 33 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -
n) Slab Size (7.189*1.380)=1 7.189 1.380 - - - - - - - - -
SEC. 1-1 - - - - - -
12 MM dia. Chimta Bars @ 100 MM C/C 2 72.00 1 144 12 3.555 0.075 3 3.594 - - 517.54 - - - - -
10 MM dia. Binders @ 200 MM C/C at Bottom 2 6.00 1 12 10 7.589 7.589 - 91.07 - - - - - -
10 MM dia. Binders @ 200 MM C/C at Top 2 6.00 1 12 10 7.589 7.589 - 91.07 - - - - - -
12 MM dia. Chairs 0 10 1 0 12 0.386 0.600 0.386 4 1.324 - - - - - - - -
o) Slab Size (4.140*1.200)=1 4.140 1.200 - - - - - - - - -
SEC. 1-1 - - - - - -
12 MM dia. Chimta Bars @ 100 MM C/C 2 41.00 1 82 12 3.335 0.075 3 3.374 - - 276.67 - - - - -
10 MM dia. Binders @ 200 MM C/C at Bottom 2 7.00 1 14 10 4.685 4.685 - 65.59 - - - - - -
10 MM dia. Binders @ 200 MM C/C at Top 2 7.00 1 14 10 4.685 4.685 - 65.59 - - - - - -
12 MM dia. Chairs 0 5 1 0 12 0.386 0.600 0.386 4 1.324 - - - - - - - -
p) Slab Size (1.532*1.471)=1 1.532 1.471 - - - - - - - - -
39
10 MM dia. Main Bars @ 125 MM C/C at Bottom 2 12.00 1 24 10 2.241 2.241 - 53.78 - - - - - -
10 MM dia. Cross Bars @ 150 MM C/C at Top 2 10.00 1 20 10 2.072 2.072 - 41.44 - - - - - -
12 MM dia. Extra Bars @ 100 MM C/C at Top 2 15.00 1 30 12 3.712 3.712 - - 111.36 - - - - -
8 MM dia. Binders @ 200 MM C/C at Top 2 8.00 2 32 8 1.471 1.471 47.07 - - - - - - -
12 MM dia. Chairs 0 2 1 0 12 0.386 0.600 0.386 4 1.324 - - - - - - - -
- - - - - -
C) STEEL OF STAIR CASES - - - - - -
SEC 2-2 (SIZES AS PER RCC) 1.763 0.275 - - - - - -
Bottom Bars 16 MM dia. 2 17.00 1 34 16 10.706 10.706 - - - 363.99 - - - -
Top Bars 16 MM dia. 2 17.00 1 34 16 10.706 10.706 - - - 363.99 - - - -
Face Bars 16 MM dia. 2 2.00 1 4 16 8.681 8.681 - - - 34.72 - - - -
Main Outer Ring Bar 10 dia @ 100 MM (16L) 2 95.00 1 190 10 3.406 0.430 0.200 5 3.986 - 757.34 - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM c/c (16L) 2 95.00 6 1140 10 0.213 0.430 0.200 5 0.793 - 903.88 - - - - - -
-
TOTAL LENGTH OF BARS IN RMT 3,864.94 16,047.17 5,634.03 1,426.68 544.44 3,988.13 - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
Total Qty. of Reinforcement. 1,526.649 9,901.106 5,003.018 2,251.304 1,342.589 15,370.3 - -
40
PROJECT : 0
CLIENT:-
WORK:- STEEL OF GROUND FLOOR ROOF
Reinforcement Steel
S.No. Description. Unit Bars Nos. No. Dia A B C D Bend Length 8 10 12 16 20 25 28 32 Remarks
GROUND FLOOR ROOF
VILLAS
A) STEEL OF BEAMS -
COVER=30 MM
a) Bems B1 (600*600)=1 0.600 0.600 -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
Main Outer Ring Bar 10 dia @ 100 MM
and 150 MM c/c (6L) 2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - - -

and 150 MM c/c (6L) 2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - - -
2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - - -
and 150 MM c/c (6L)
b) Bems B2 (600*600)=1 0.600 0.600 -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
and 150 MM c/c (6L) 2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - - -

and 150 MM c/c (6L) 2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - - -

and 150 MM c/c (6L) 2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - - -
c) Bems B3 (600*600)=1 0.600 0.600 - - - -
41
PROJECT : 0
CLIENT:-
Reinforcement Steel
Top Bars 25 MM dia. 2 5 1 10 25 0.400 5.018 0.400 2 5.718 - - - - - 57.18 -
Main Outer Ring Bar 8 dia @ 100 MM and
200 MM c/c (4L) 2 35.00 1 70 8 1.080 1.080 0.150 5 2.230 156.10 - - - - - - -
Main Inner Ring Bar 8 dia @ 100 MM and

200 MM c/c (4L) 2 35.00 1 70 8 0.540 1.080 0.150 5 1.690 118.30 - - - - - - -
c) Bems B4 (375*300)=1 0.375 0.300 -

Bottom Extra Bars 16 MM 1 4 1 4 16 2.845 2.845 - - - 11.38 - - -
Top Bars 20 MM dia. 1 4 1 4 20 0.200 4.685 0.200 2 5.005 - - - - 20.02 - -
Spacer Bars 25 MM dia. At Top 0 2 2 0 25 0.315 0.315 - - -

200 MM c/c (4L) 1 32.00 1 32 8 0.630 0.480 0.150 5 1.180 37.76 - - - - - - -

200 MM c/c (4L) 1 32.00 1 32 8 0.210 0.480 0.150 5 0.760 24.32 - - - - - - -
d) Bems B4 A (375*300)=1 0.375 0.300 - -

Spacer Bars 25 MM dia. At Bottom 0 4 1 0 25 0.315 0.315 - - -
Top Bars 20 MM dia. 1 4 1 4 20 0.200 4.695 0.200 2 5.015 - - - - 20.06 - -
200 MM c/c (4L) 1 32.00 1 32 8 0.630 0.480 0.150 5 1.180 37.76 - - - - - - -

200 MM c/c (4L) 1 32.00 1 32 8 0.210 0.480 0.150 5 0.760 24.32 - - - - - - -
Bems B5 (230*600) & (450*450)

d) (300*600)=1 0.230 0.600 0.450 0.450 0.300 0.600 - -

Bottom Bars 25 MM dia. 2 5 1 10 25 1.250 6.692 1.250 9.192 - - - - - 91.92 -
42
PROJECT : 0
CLIENT:-
Reinforcement Steel
Top Bars 25 MM dia. 2 3 1 6 25 0.400 16.539 0.400 2 17.239 - - - - - 103.43 -
Top Bars 25 MM dia. 2 2 1 4 25 0.400 7.387 0.300 2 7.987 - - - - - 31.95 -

and 200 MM c/c (2L) (230*600) 2 28.00 1 56 10 0.340 1.080 0.200 5 1.520 - 85.12 - - - - - -

and 200 MM c/c (2L) (450*450) 2 53.00 1 106 10 0.780 0.780 0.200 5 1.660 - 175.96 - - - - - -

and 200 MM c/c (2L) (300*600) 2 34.00 1 68 10 0.480 1.080 0.200 5 1.660 - 112.88 - - - - - -
e) Bems B6 (230*600), (375*600)=1 0.230 0.60 0.375 0.60 -
Top Bars 16 MM dia. 2 3 1 6 20 0.400 7.122 0.400 2 7.842 - - - - 47.05 - -

Main Ring Bar 10 dia @ 100 MM c/c (2L)
(230*600) 2 13.00 1 26 10 0.340 1.080 0.200 5 1.520 - 39.52 - - - - - -

(375*600) 2 23.00 1 46 10 0.630 1.080 0.200 5 1.810 - 83.26 - - - - - -
f) Bems B7 (300*600) =1 0.300 0.60 - - - -

Top Bars 25 MM dia. 2 3 1 6 25 0.400 11.750 0.400 2 12.450 - - - - - 74.70 - -
43
PROJECT : 0
CLIENT:-
Reinforcement Steel

and 150 MM c/c (2L) (300*600) 2 72.00 1 144 10 0.480 1.080 0.200 5 1.660 - 239.04 - - - - - -
g) Bems B8 (750*600)=1 0.750 0.600 - -

Top Bars 25 MM dia. 2 7 1 14 25 0.400 11.380 0.400 2 12.080 - - - - - 169.12 - -
150 MM c/c (6L) 2 91.00 1 182 10 1.380 1.080 0.200 5 2.560 - 465.92 - - - - - -

150 MM c/c (6L) 2 91.00 1 182 10 0.920 1.080 0.200 5 2.100 - 382.20 - - - - - -

150 MM c/c (6L) 2 91.00 1 182 10 0.460 1.080 0.200 5 1.640 - 298.48 - - - - - -
Bems B9
h) (375*600)*(300*600)*(230*600)=1 0.375 0.600 0.300 0.600 0.230 0.600 - - -

Top Bars 20 MM dia. 1 3 1 3 20 0.400 13.240 0.400 2 13.960 - - - - 41.88 - - -
Overlaps 20 MM dia. at Top 1 3 1 3 20 1.000 1.000 - - - - 3.00 - - -
Top Extra Bars 20 MM at Center H7 1 3 1 3 20 3.850 3.850 - - - - 11.55 - - -
Top Extra Bars 20 MM (Right)/H6 1 3 1 3 20 4.640 0.400 1 5.000 - - - - 15.00 - - -
200 MM c/c (2L) (375*600) 1 28.00 1 28 8 0.630 1.080 0.150 5 1.780 49.84 - - - - - - -

200 MM c/c (2L) (300*600) 1 43.00 1 43 8 0.480 1.080 0.150 5 1.630 70.09 - - - - - - -
44
PROJECT : 0
CLIENT:-
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM c/c
(2L) (230*600) 1 19.00 1 19 8 0.340 1.080 0.150 5 1.490 28.31 - - - - - - -
i) Bems B10 (230*600)=1 0.230 0.600 0.150 - - - - - - - -

Bottom Extra Bars 20 MM 1 3 1 3 20 1.000 2.495 0.090 1 3.545 - - - - 10.64 - - -
Top Bars 20 MM dia. 1 3 1 3 20 0.400 10.880 0.400 2 11.600 - - - - 34.80 - - -
Top Extra Bars 20 MM 1 3 1 3 20 0.400 1.590 1 1.950 - - - - 5.85 - - -
Top Extra Bars 20 MM at Joint H2 1 3 1 3 20 3.600 3.600 - - - - 10.80 - - -
Top Extra Bars 20 MM at Joint H1 1 3 1 3 20 1.350 3.695 0.090 1 5.095 - - - - 15.29 - - -
200 MM c/c (2L) 1 65.00 1 65 8 0.340 1.080 0.150 5 1.490 96.85 - - - - - - -

(2L) (230*150) Flat Beam 1 25.00 1 25 8 0.340 0.180 0.150 5 0.590 14.75 - - - - - - -
j) Bems B11 (230*450)=2 (LIFTS) 0.230 0.600 - - - - - - - -

Top Bars 16 MM dia. 2 3 1 6 16 0.400 2.560 0.400 2 3.296 - - - 19.78 - - - -
k) Bems B11 (300*300)=1 (SHAFT) 0.300 0.300 - - - - - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.100 3.080 0.100 2 3.216 - - - 19.30 - - - -
l) Bems B12 (450*600)=1 0.450 0.600 0.150 - - - -
Bottom Extra Bars 20 MM 2 4 1 8 20 1.000 2.420 0.090 1 3.470 - - - - 27.76 - - -
Top Bars 20 MM dia. 2 5 1 10 20 0.400 15.800 0.400 2 16.520 - - - - 165.20 - - -
Top Extra Bars 20 MM at Joint H4 2 5 1 10 20 0.400 1.990 1 2.350 - - - - 23.50 - - -
45
PROJECT : 0
CLIENT:-
Reinforcement Steel
Top Extra Bars 20 MM 2 5 1 10 20 3.700 3.700 - - - - 37.00 - - -
200 MM c/c (4L) 2 91.00 1 182 8 0.780 1.080 0.150 5 1.930 351.26 - - - - - - -

200 MM c/c (4L) 2 91.00 1 182 8 0.390 1.080 0.150 5 1.540 280.28 - - - - - - -

(2L) (450*150) Flat Beam 2 25.00 1 50 8 0.780 0.180 0.150 5 1.030 51.50 - - - - - - -
m) Bems B13 (600*450)=1 0.600 0.450 - - - - - -

Top Bars 25 MM dia. 2 6 1 12 25 0.300 9.760 0.300 2 10.260 - - - - - 123.12 - -
200 MM c/c (6L) 2 70.00 1 140 8 1.080 0.780 0.150 5 1.930 270.20 - - - - - - -

200 MM c/c (6L) 2 70.00 1 140 8 0.648 0.780 0.150 5 1.498 209.72 - - - - - - -

200 MM c/c (6L) 2 70.00 1 140 8 0.216 0.780 0.150 5 1.066 149.24 - - - - - - -
n) Bems B14(375*600)=1 0.375 0.600 0.150 - - - - - -

Bottom Extra Bars 20 MM 2 4 1 8 20 0.090 2.970 1.000 4.060 - - - - 32.48 - - -
Top Bars 20 MM dia. 2 4 1 8 20 0.090 9.831 0.400 2 10.241 - - - - 81.93 - - -
Top Extra Bars 25 MM at Joint H7 0 4 0 0 20 1.000 2.970 0.090 1 4.020 - - - - - - - -
200 MM c/c (4L) 2 46.00 1 92 8 0.630 1.080 0.150 5 1.780 163.76 - - - - - - -

200 MM c/c (4L) 2 46.00 1 92 8 0.210 1.080 0.150 5 1.360 125.12 - - - - - - -

(2L) (375*150) Flat Beam 2 30.00 1 60 8 0.630 0.180 0.150 5 0.880 52.80 - - - - - - -

(2L) (375*150) Flat Beam 2 30.00 1 60 8 0.210 0.180 0.150 5 0.460 27.60 - - - - - - -
o) Bems B15(230*830)=1 0.230 0.830 - - - - - -

46
PROJECT : 0
CLIENT:-
Reinforcement Steel
Top Bars 20 MM dia. 2 3 1 6 20 0.553 6.790 0.553 2 7.817 - - - - 46.90 - - -

200 MM c/c (2L) 2 43.00 1 86 8 0.340 1.540 0.150 5 1.950 167.70 - - - - - - -
p) Bems B16 (300*600)=1 0.300 0.600 0.150 - - - - - -

Top Bars 20 MM dia. 2 3 1 6 20 0.400 13.558 0.400 2 14.278 - - - - 85.67 - - -
Bottom Extra Bars 25 MM at Joint H1 2 3 1 6 25 1.250 2.420 0.090 1 3.710 - - - - - 22.26 - -
200 MM c/c (2L) 2 85.00 1 170 8 0.480 1.080 0.150 5 1.630 277.10 - - - - - - -

(2L) (300*150) Flat Beam 2 25.00 1 50 8 0.480 0.180 0.150 5 0.730 36.50 - - - - - - -
q) Bems B17(300*600)=1 0.300 0.600 0.150 - - - - - -

Top Bars 20 MM dia. 2 3 1 6 20 0.400 6.169 0.400 2 6.889 - - - - 41.33 - - -
Top Extra Bars 16 MM at Joint H3 2 3 1 6 16 1.350 3.713 0.090 1 5.121 - - - 30.73 - - - -
200 MM c/c (2L) 2 39.00 1 78 8 0.480 1.080 0.150 5 1.630 127.14 - - - - - - -

(2L) (300*150) Flat Beam 2 31.00 1 62 8 0.480 0.180 0.150 5 0.730 45.26 - - - - - - -
47
PROJECT : 0
CLIENT:-
Reinforcement Steel
Bems B18
r) (375*600)*(300*600)*(230*600)=1 0.375 0.600 0.230 0.600 0.150 - - - -

Top Bars 20 MM dia. 1 3 1 3 20 0.400 33.360 0.400 2 34.080 - - - - 102.24 - - -

200 MM c/c (2L) (375*600) 1 28.00 1 28 10 0.630 1.080 0.200 5 1.810 - 50.68 - - - - - -

200 MM c/c (2L) (300*600) 1 43.00 1 43 10 0.630 1.080 0.200 5 1.810 - 77.83 - - - - - -

(2L) (230*600) 1 397.00 1 397 10 0.170 1.080 0.200 5 1.350 - 535.95 - - - - - -

(2L) (230*150) Flat Beam 1 25.00 1 25 10 0.340 0.180 0.200 5 0.620 - 15.50 - - - - - -
s) Beam BX (395*600)=2 0.395 0.600 - - - - - - - -

Top Bars 16 MM dia. 2 4 1 8 16 0.400 0.850 0.540 2 1.726 - - - 13.81 - - -
- - -
B) STEEL OF SLAB - - - - - - - -
COVER=20 MM - - -
a) Slab S1 (5.495*5.861)=1 5.495 5.861 - - - - - - - -
48
PROJECT : 0
CLIENT:-
Reinforcement Steel
10 MM dia. Main Bars (a) @ 125 MM C/C
47.00 Alt. Bent Back 2 24.00 1 48 10 6.040 6.040 - 289.92 - - - - - -

37.00 Alt. Bent Back 2 23.00 1 46 10 7.345 7.345 - 337.87 - - - - - -
10 MM dia. Cross Bars (b) @ 150 MM C/C

at Bottom (SEC 2-2) 2 19.00 1 38 10 9.851 0.382 1 10.223 - 388.47 - - - - - -
10 MM dia. Extra Bars © @ 150 MM C/C

Alt. Bent Back (Double Spacing) on Beam 2 18.00 1 36 10 5.195 1 5.185 - 186.67 - - - - - -
B8
16 MM dia. Extra Bars @ 125 MM C/C at
Top on Beam B8 2 44.00 1 88 16 6.730 1 6.714 - - - 590.83 - - - -

Alt. Bent Back (Double Spacing) on Beam 2 23.00 1 46 10 0.100 1.574 1 1.664 - 76.53 - - - - - -
B15
B7
10 MM dia. Binders @ 200 MM C/C on
Front Projection Bottom & Top 2 15.00 1 30 10 5.495 5.495 - 164.85 - - - - - -
12 MM dia. Chairs 0 48.69 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -

b) Slab S1 (5.100*5.861)=1 5.100 5.861 - - - - - - - - -
47.00 Alt. Bent Back 2 24.00 1 48 10 5.715 5.715 - 274.32 - - - - - -

34.00 Alt. Bent Back 2 23.00 1 46 10 7.119 7.119 - 327.46 - - - - - -

at Bottom (SEC 2-2) 2 26.00 1 52 10 9.851 0.382 1 10.223 - 531.60 - - - - - -

at Bottom 2 8.00 1 16 10 8.501 8.501 - 136.02 - - - - - -

B8
Alt. Bent Back (Double Spacing) on Beam 2 4.00 1 8 10 3.845 1 3.835 - 30.68 - - - - - -
B8
Top on Beam B8 2 30.00 1 60 16 6.730 1 6.714 - - - 402.84 - - - -

B18
49
PROJECT : 0
CLIENT:-
Reinforcement Steel
B7
10 MM dia. Extra Bars Bars © @ 150 MM
C/C Alt. Bent Back (Double Spacing) on 0 17.50 1 0 10 0.100 2.215 1 2.305 - - - - - - - -
Beam B8
Front Projection Bottom & Top 2 15.00 1 30 8 3.763 3.763 112.89 - - - - - - -

Front Projection Bottom & Top 2 8.00 2 32 8 1.337 1.337 42.78 - - - - - - -

Front Side Fasia 2 2.00 1 4 8 9.748 9.748 38.99 - - - - - - -
12 MM dia. Chairs 0 45 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -

LEFT SIDE PROJECTION 793 MM WIDE -
SEC 3-3 -
12 MM dia. Chimta Bars @ 150 MM C/C 2 52.00 1 104 12 0.075 2.056 0.075 3 2.170 - - 225.68 - - - - -
12 MM dia. Binders @ 150 MM C/C at
Bottom 2 6.00 2 24 12 7.637 7.637 - - 183.29 - - - - -
12 MM dia. Binders @ 200 MM C/C at Top 0 6 1 0 12 4.705 4.705 - - - - - - - -
12 MM dia. Chairs 0 8 1 0 12 0.386 0.600 0.386 4 1.324 - - - - - - - -

STEEL OF HANGER (DETAIL 1) -
DETAIL 1 -
10 MM dia. Chimta Bars @ 150 MM C/C
Outer Side 2 73.00 1 146 10 0.110 1.215 0.500 3 1.795 - 262.07 - - - - - -
10 MM dia. Chimta Bars @ 150 MM C/C

Inner Side 2 73.00 1 146 10 0.110 0.975 0.500 3 1.555 - 227.03 - - - - - -
10 MM dia. Binders @ 150 MM C/C Outer

Side 2 8.00 1 16 10 10.710 10.710 - 171.36 - - - - - -
10 MM dia. Binders @ 150 MM C/C Inner

Side 2 6.00 1 12 10 10.710 10.710 - 128.52 - - - - - -
c) Slab S2 (6.737*5.690)=1 6.737 5.690 - - - - - - - - -

67.00 Alt. Bent Back 2 34.00 1 68 10 6.680 6.680 - 454.24 - - - - - -

38.00 Alt. Bent Back 2 33.00 1 66 10 8.240 8.240 - 543.84 - - - - - -

Alt. Bent Back 2 10.00 1 20 10 8.589 8.589 - 171.78 - - - - - -
50
PROJECT : 0
CLIENT:-
Reinforcement Steel
Alt. Bent Back 2 10.00 1 20 10 8.496 8.496 - 169.92 - - - - - -

Alt. Bent Back 2 9.00 1 18 10 8.589 8.589 - 154.60 - - - - - -

Alt. Bent Back 2 9.00 1 18 10 8.121 8.121 - 146.17 - - - - - -

C/C Alt. Bent Back (Double Spacing) on 2 33.00 1 66 10 0.100 1.843 1 1.933 - 127.55 - - - - - -
Beam B5
12 MM dia. Chairs 0 38 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -
d) Slab S2 (6.737*6.120)=1 6.737 6.120 - - - - - - - - -
67.00 Alt. Bent Back (SEC 1-1) 2 34.00 1 68 10 9.730 0.457 1 10.177 - 692.04 - - - - - -

41.00 Alt. Bent Back (SEC 1-1) 2 33.00 1 66 10 11.173 0.457 1 11.620 - 766.89 - - - - - -

Alt. Bent Back (SEC 1-1) 2 12.00 1 24 10 9.496 9.496 - 227.90 - - - - - -

Alt. Bent Back 2 12.00 1 24 10 8.427 8.427 - 202.25 - - - - - -

Alt. Bent Back (SEC 1-1) 2 9.00 1 18 10 8.456 8.456 - 152.20 - - - - - -

Alt. Bent Back 2 8.00 1 16 10 7.427 7.427 - 118.83 - - - - - -

B1 at Top
12 MM dia. Extra Bars at Top @ 100 MM
C/C Alt. Bent Back (Double Spacing) on 2 33.00 1 66 12 5.480 0.457 1 5.925 - - 391.05 - - - - -
Beam B1 (SEC 1-1)
10 MM dia. Extra at Top © @ 150 MM
Beam B16
Beam B16 (SEC 1-1)
8 MM dia. Binders @ 200 MM C/C 0 13.50 1 0 8 7.447 7.447 - - - - - - - -
12 MM dia. Chairs 0 41 1 0 12 0.415 0.600 0.415 4 1.382 - - - - - - - -
e) Slab S3 (4.115*6.120)=1 4.115 6.120 - - - - - - - - -
51
PROJECT : 0
CLIENT:-
Reinforcement Steel
41.00 Alt. Bent Back 2 21.00 1 42 10 4.735 4.735 - 198.87 - - - - - -

21.00 Alt. Bent Back 2 20.00 1 40 10 6.449 6.449 - 257.94 - - - - - -

Alt. Bent Back 2 11.00 1 22 10 9.730 9.730 - 214.06 - - - - - -

Alt. Bent Back 2 10.00 1 20 10 10.490 10.490 - 209.80 - - - - - -

B1 at Top
Beam B1 (SEC 1-1)
Alt. Bent Back (Double Spacing) on Beam 2 20.00 1 40 10 1.229 1.229 - 49.15 - - - - - -
B18 at Top
12 MM dia. Chairs 0 25.18 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
REAR PROJECTION (L-SHAPED) - - -
10 MM dia. Fasia Bars @ 150 MM C/C
(SEC1-1) (L=12.832+6.552=19.384) 2 130.00 1 260 10 0.075 0.960 0.075 2 1.090 - 283.40 - - - - - -
10 MM dia. Binders @ 150 MM C/C (Fasia) 2 6.00 1 12 8 19.304 19.304 231.65 - - - - - - -
Overlaps 10 MM dia. 2 6.00 1 12 10 0.450 0.450 - 5.40 - - - - - -

Front Projection Bottom & Top (L-SHAPED) 2 13.00 2 52 10 12.79 12.792 - 665.18 - - - - - -
Overlaps 10 MM dia. 2 13.00 2 52 10 0.45 0.450 - 23.40 - - - - - -

Front Projection Bottom & Top (L-SHAPED) 2 6.00 2 24 10 4.58 4.580 - 109.92 - - - - - -
f) Slab S3 (4.528*5.383)=1 4.528 5.383 - - - - - - - - -

36.00 Alt. Bent Back 2 18.00 1 36 10 5.068 5.068 - 182.45 - - - - - -

23.00 Alt. Bent Back 2 18.00 1 36 10 6.782 6.782 - 244.16 - - - - - -

Alt. Bent Back (SEC 4-4) 2 12.00 1 24 10 9.386 9.386 - 225.26 - - - - - -

Alt. Bent Back (SEC 4-4) 2 11.00 1 22 10 9.386 9.386 - 206.49 - - - - - -
52
PROJECT : 0
CLIENT:-
Reinforcement Steel
B16 at Top
Alt. Bent Back (Double Spacing) on Beam 0 18.44 1 0 10 1.432 0.100 1 1.522 - - - - - - - -
B17 at Top
B5 at Top
16 MM dia. Extra Bars @ 125 MM C/C
Alt. Bent Back (Double Spacing) on Beam 2 36.00 1 72 16 6.723 0.100 1 6.807 - - - 490.10 - - - -
B3 at Top (SEC4-4)
8 MM dia. Binders @ 200 MM C/C 2 16.00 1 32 10 5.088 5.088 - 162.82 - - - - - -
Rear Projection Bottom & Top 2 16.00 1 32 10 5.088 5.088 - 162.82 - - - - - -
12 MM dia. Chairs 0 38.09 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

10 MM dia. Fasia Bars @ 150 MM C/C
(SEC 4-4) 2 22.00 1 44 10 0.075 0.747 0.075 2 0.877 - 38.59 - - - - - -
10 MM dia. Binders @ 150 MM C/C (Fasia) 2 6.00 1 12 10 5.088 5.088 - 61.06 - - - - - -
g) Slab S4 (4.115*2.960)=1 4.115 2.960 - - - - - - - - -

21.00 Alt. Bent Back 2 4.00 1 8 10 3.905 3.905 - 31.24 - - - - - -

17.00 Alt. Bent Back 2 4.00 1 8 10 5.435 5.435 - 43.48 - - - - - -

Alt. Bent Back 2 7.00 1 14 10 4.531 4.531 - 63.44 - - - - - -

Alt. Bent Back 2 6.00 1 12 10 5.435 5.435 - 65.22 - - - - - -

Alt. Bent Back 2 9.00 1 18 8 4.735 4.735 85.23 - - - - - - -

Alt. Bent Back 2 8.00 1 16 8 6.449 6.449 103.19 - - - - - - -

C/C Alt. Bent Back (Double Spacing) on 2 8.00 1 16 8 0.100 1.229 1 1.321 21.13 - - - - - - -
Beam B18
Beam B4A
53
PROJECT : 0
CLIENT:-
Reinforcement Steel
12 MM dia. Chairs 0 12.18 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -
h) Slab S5 (2.615*2.575)=1 2.615 2.575 - - - - - - - - -
18.00 8 MM dia. Main Bars (a) @ 150 MM C/C 2 9.00 2 36 8 3.120 3.120 112.32 - - - - - - -
8 MM dia. Cross Bars (b) @ 175 MM C/C 2 8.00 2 32 8 3.235 3.235 103.52 - - - - - - -
12 MM dia. Chairs 0 6.73 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

i) Slab S5 (2.262*2.075)=1 2.262 2.075 - - - - - - - - -
10 MM dia. Main Bars (a) @ 150 MM C/C 2 15.00 2 60 8 2.690 2.690 161.40 - - - - - - -
12 MM dia. Chairs 0 5 1 0 12 0.390 0.600 0.390 4 1.332 - - - - - - - -

- - - - -
C) STEEL OF STAIR CASES - - - - -
SEC 2-2 1.763 0.275 - - - - -
Bottom Bars 16 MM dia. 2 17 1 34 16 13.833 13.833 - - - 470.32 - - - -
Top Bars 16 MM dia. 2 17 1 34 16 13.833 13.833 - - - 470.32 - - - -
Face Bars 16 MM dia. 2 2 1 4 16 7.716 7.716 - - - 30.86 - - - -
(16L) 2 127.00 1 254 10 3.406 0.430 0.200 5 3.986 - 1,012.44 - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM c/c

(16L) 2 127.00 6 1524 10 0.213 0.430 0.200 5 0.793 - 1,208.34 - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM c/c

(16L) 2 127.00 1 254 10 0.426 0.430 0.200 5 1.006 - 255.46 - - - - - -
-
TOTAL LENGTH OF BARS IN RMT 5,796.87 19,016.47 1,110.97 2,937.04 1,940.90 2,649.30 - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
Total Qty. of Reinforcement. 2,289.765 11,733.161 986.540 4,634.643 4,786.250 10,210.4 - -
54
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
CLIENT:- TOTAL MT 46.884
WORK:- STEEL OF FIRST FLOOR ROOF
Reinforcement Steel
Total Length of Bar Dai wise
No of Nos. of Total No. Of Cutting
FIRST FLOOR ROOF
VILLAS
A) STEEL OF BEAMS -
COVER=30 MM
a) Bems B1 (600*600)=1 0.600 0.600 -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
Main Outer Ring Bar 10 dia @ 100 MM and 150 MM c/c (6L) 2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM and 200 MM c/c (6L) 2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - - -
b) Bems B2 (600*600)=1 0.600 0.600 - -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
c) Bems B3 (450*600)=1 0.450 0.600 - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.400 5.080 0.400 2 5.780 - - - - - 46.24 -
55
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM and 200 MM c/c (4L) 2 35.00 1 70 8 0.780 1.080 0.150 5 1.930 135.10 - - - - - - -
Main Inner Ring Bar 8 dia @ 100 MM and 200 MM c/c (4L) 2 35.00 1 70 8 0.260 1.080 0.150 5 1.410 98.70 - - - - - - -
d) Bems B4 (375*300)=1 0.375 0.300 - - -
Top Bars 20 MM dia. 1 4 1 4 20 0.200 4.675 0.200 2 4.995 - - - - 19.98 - -
e) Bems B4 A (375*300)=1 0.375 0.300 - -
Spacer Bars 25 MM dia. At Bottom 0 4 1 0 25 0.315 0.315 - - -
Top Bars 20 MM dia. 1 4 1 4 20 0.200 4.695 0.200 2 5.015 - - - - 20.06 - -
f) Bems B5 (230*600) & (750*525) (300*600)=1 0.230 0.600 0.750 0.525 0.300 0.600 - -
Bottom Bars 25 MM dia. 2 6 1 12 25 1.250 6.587 1.250 9.087 - - - - - 109.04 -
Top Bars 25 MM dia. 2 3 1 6 25 0.400 16.538 0.400 2 17.238 - - - - - 103.43 -
Top Bars 25 MM dia. 2 3 1 6 25 0.350 7.387 0.350 2 7.987 - - - - - 47.92 -
56
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM and 200 MM c/c (2L) (230*600) 2 28.00 1 56 8 0.340 1.080 0.150 5 1.490 83.44 - - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM and 200 MM c/c (2L) (750*525) 2 52.00 1 104 10 1.380 0.930 0.200 5 2.410 - 250.64 - - - - - -
Main Outer Ring Bar 10 dia @ 100 MM and 200 MM c/c (6L) (750*525) 2 52.00 1 104 10 0.828 0.930 0.200 5 1.858 - 193.23 - - - - - -
Main Inner Ring Bar 10 dia @ 100 MM and 200 MM c/c (2L) (750*525) 2 52.00 1 104 10 0.276 0.930 0.200 5 1.306 - 135.82 - - - - - -
Main Outer Ring Bar 8 dia @ 100 MM and 200 MM c/c (2L) (300*600) 2 34.00 1 68 8 0.480 1.080 0.150 5 1.630 110.84 - - - - - - -
g) Bems B6 (230*600), (375*175)=1 0.230 0.60 0.375 0.175 -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 7.266 0.117 2 7.703 - - - - 46.22 - -
Main Ring Bar 8 dia @ 100 MM c/c (2L) (230*600) 2 13.00 1 26 8 0.340 1.080 0.150 5 1.490 38.74 - - - - - - -
Main Ring Bar 8 dia @ 100 MM c/c (2L) (375*175) 2 24.00 1 48 8 0.630 0.230 0.150 5 0.930 44.64 - - - - - - -
h) Bems B7 (375*450 & 600*450) =1 0.375 0.450 0.600 0.450 - - - -
Bottom Bars 25 MM dia. (V2-V3) 2 2 1 4 25 0.300 7.610 0.300 2 8.110 - - - - - 32.44 - -
Bottom Extra Bars 20 MM (V2-V3) 2 6 1 12 25 5.000 5.000 - - - - - 60.00 - -
Top Bars 25 MM dia. 2 4 1 8 25 0.300 11.750 0.300 2 12.250 - - - - - 98.00 - -
Top Bars 25 MM dia. (V2-V3) 2 2 1 4 25 0.300 7.610 0.300 2 8.110 - - - - - 32.44 - -
Main Outer Ring Bar 10 dia @ 100 MM (4L) (375*450) 2 9.00 1 18 10 0.630 0.780 0.200 5 1.510 - 27.18 - - - - - -
Main Outer Ring Bar 10 dia @ 100 MM (4L) (375*450) 2 9.00 1 18 10 0.210 0.780 0.200 5 1.090 - 19.62 - - - - - -
Main Outer Ring Bar 10 dia @ 100 MM and 150 MM c/c (4L) (600x450) 2 59.00 1 118 10 1.080 0.780 0.200 5 1.960 - 231.28 - - - - - -
Main Outer Ring Bar 10 dia @ 100 MM and 150 MM c/c (4L) (600x450) 2 59.00 1 118 10 0.648 0.780 0.200 5 1.528 - 180.30 - - - - - -
i) Bems B8 (750*600)=1 0.750 0.600 - -
Top Bars 25 MM dia. 2 7 1 14 25 0.400 11.380 0.400 2 12.080 - - - - - 169.12 - -
57
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
j) Bems B9 (375*600)*(375*600)*(230*600)=1 0.375 0.600 0.375 0.600 0.230 0.600 - - -
Bottom Bars 20 MM dia. (H6-H7) 1 1 1 1 20 0.400 6.791 0.400 2 7.511 - - - - 7.51 - - -
Top Bars 20 MM dia. 1 3 1 3 20 0.400 13.240 0.400 2 13.960 - - - - 41.88 - - -
Top Bars 20 MM dia. (H6-H7) 1 1 1 1 20 0.400 6.791 0.400 2 7.511 - - - - 7.51 - - -
Top Extra Bars 20 MM at Center H7 1 3 1 3 20 0.400 1.540 1.940 - - - - 5.82 - - -
Top Extra Bars 20 MM at Center H7 1 3 1 3 20 3.850 1 3.810 - - - - 11.43 - - -
Top Extra Bars 20 MM at Center H7 1 1 1 1 20 0.400 2.790 1 3.150 - - - - 3.15 - - -
Top Extra Bars 20 MM (Right)/H6 1 4 1 4 20 1.890 0.400 1 2.250 - - - - 9.00 - - -
Top Extra Bars 25 MM (Right)/H6 1 3 1 3 25 0.400 2.630 0.400 1 3.380 - - - - - 10.14 - -
Main Outer Ring Bar 8 dia @ 100 MM c/c (2L) (230*600) 1 19.00 1 19 10 0.340 1.080 0.200 5 1.520 - 28.88 - - - - - -
k) Bems B10 (230*600)=1 0.230 0.600 0.150 - - - - - - - -
Bottom Extra Bars 16 MM 1 3 1 3 16 0.800 2.420 0.090 1 3.278 - - - 9.83 - - - -
Top Bars 25 MM dia. 1 3 1 3 25 0.400 10.880 0.400 2 11.580 - - - - - 34.74 - -
Top Extra Bars 25 MM 1 3 1 3 25 0.400 1.590 1 1.940 - - - - - 5.82 - -
Top Extra Bars 25 MM at Joint H2 1 3 1 3 25 3.600 3.600 - - - - - 10.80 - -
Top Extra Bars 25 MM at Joint H1 1 3 1 3 25 1.350 3.620 0.090 1 5.010 - - - - - 15.03 - -
58
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM c/c (2L) (230*150) Flat Beam 1 25.00 1 25 8 0.340 0.180 0.150 5 0.590 14.75 - - - - - - -
l) Bems B11 (230*450)=2 (LIFTS) 0.230 0.450 - - - - - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.300 2.560 0.300 2 3.096 - - - 18.58 - - - -
m) Bems B11 (300*300)=1 (SHAFT) 0.300 0.300 - - - - - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.200 3.080 0.200 2 3.416 - - - 20.50 - - - -
n) Bems B12 (450*600)=1 0.450 0.600 0.150 - - - -
Bottom Extra Bars 16 MM 2 5 1 10 16 0.800 2.270 0.090 1 3.128 - - - 31.28 - - - -
Top Bars 20 MM dia. 2 5 1 10 20 0.400 15.690 0.400 2 16.410 - - - - 164.10 - - -
Top Extra Bars 20 MM 2 5 1 10 20 3.700 3.700 - - - - 37.00 - - -
o) Bems B13(375*450)=1 0.375 0.450 - - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.300 8.895 0.300 2 9.395 - - - - - 75.16 - -
Top Extra Bars 25 MM at Joint H7 2 4 1 8 25 4.209 0.300 1 4.459 - - - - - 35.67 - -
p) Bems B14(600*450)=1 0.600 0.450 - - - - - -
59
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Top Bars 25 MM dia. 2 6 1 12 25 0.300 15.980 0.300 2 16.480 - - - - - 197.76 - -
Overlaps 25 MM dia. at Top 2 6 1 12 25 1.250 1.250 - - - - - 15.00 - -
q) Bems B15(230*600)=1 0.230 0.600 0.150 - - - - - -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 6.790 0.400 2 7.510 - - - - 45.06 - - -
Bottom Extra Bars 16 MM at Joint H7 2 3 1 6 16 0.800 1.810 0.090 1 2.668 - - - 16.01 - - - -
r) Bems B16 (450*600 & 375*600)=1 0.450 0.600 0.375 0.150 - - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.400 22.901 0.400 2 23.601 - - - - - 188.81 - -
Overlaps 25 MM dia. at Top 2 8 1 16 25 1.250 1.250 - - - - - 20.00 - -
60
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM and 200 MM c/c (450*600) (4L) 2 114.00 1 228 8 0.780 1.080 0.150 5 1.930 440.04 - - - - - - -
Main Inner Ring Bar 8 dia @ 100 MM and 200 MM c/c (450*600) (4L) 2 114.00 1 228 8 0.260 1.080 0.150 5 1.410 321.48 - - - - - - -
Main Outer Ring Bar 8 dia @ 100 MM and 200 MM c/c (375*600) (4L) 2 39.00 1 78 8 0.630 1.080 0.150 5 1.780 138.84 - - - - - - -
Main Inner Ring Bar 8 dia @ 100 MM and 200 MM c/c (375*600) (4L) 2 39.00 1 78 8 0.210 1.080 0.150 5 1.360 106.08 - - - - - - -
s) Bems B17(300*600)=1 0.300 0.600 0.150 - - - - - -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 6.169 0.400 2 6.889 - - - - 41.33 - - -
Top Extra Bars 16 MM at Joint H3 2 3 1 6 16 1.350 3.713 0.090 1 5.121 - - - 30.73 - - - -
t) Bems B18 (375*600)*(300*600)*(230*600)=1 0.375 0.600 0.230 0.600 0.230 0.600 0.150 - - - -
Top Bars 20 MM dia. 1 3 1 3 20 0.400 33.360 0.400 2 34.080 - - - - 102.24 - - -
61
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
Main Outer Ring Bar 8 dia @ 100 MM c/c (2L) (230*600) 1 397.0 1 397 10 0.170 1.080 0.200 5 1.350 - 535.95 - - - - - -
Main Outer Ring Bar 8 dia @ 100 MM c/c (2L) (230*150) Flat Beam 1 25.00 1 25 10 0.340 0.180 0.200 5 0.620 - 15.50 - - - - - -
u) Beam BX (395*600)=2 0.395 0.600 -
Top Bars 16 MM dia. 2 4 1 8 16 0.800 0.850 0.540 2 2.126 - - - 17.01 - - -
v) Bems B19(375*425)=1 0.375 0.450 - - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.300 8.680 0.300 2 9.180 - - - - - 73.44 - -
w) Bems B20(375*450)=1 0.375 0.450 - - - - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.300 8.875 0.300 2 9.375 - - - - - 75.00 - -
x) Flat Beam FB1 (600*250)=1 0.600 0.250 - - - -
Top Bars 25 MM dia. 2 5 1 10 25 0.167 7.685 0.167 2 7.919 - - - - - 79.19 -
Main Outer Ring Bar 10 dia @ 125 MM c/c (4L) 2 53.00 1 106 10 1.080 0.380 0.200 5 1.560 - 165.36 - - - - - -
- - -
B) STEEL OF SLAB - - - - - - - - -
COVER=20 MM - - - -
a) Slab S1 (3.997*5.390)=1 3.997 5.390 - - - - - - - - -
43.00 10 MM dia. Main Bars (a) @ 125 MM C/C Alt. Bent Back 2 22.00 1 44 10 4.987 4.987 - 219.43 - - - - - -
10 MM dia. Cross Bars (b) @ 125 MM C/C Alt. Bent Back 2 16.00 1 32 10 6.680 6.680 - 213.76 - - - - - -
62
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
10 MM dia. Extra Bars © @ 125 MM C/C Alt. Bent Back (Double Spacing) on Beam B16 2 21.00 1 42 10 0.100 1.419 1 1.499 - 62.97 - - - - - -
12 MM dia. Chairs 0 21.54 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
b) Slab S1 (1.990*5.390)=1 1.990 5.390 - - - - - - - - -
10 MM dia. Main Bars (a) @ 125 MM C/C Alt. Bent Back 2 8.00 1 16 10 3.664 3.664 - 58.62 - - - - - -
12 MM dia. Chairs 0 10.73 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
c) Slab S1 (4.528*5.383)=1 4.528 5.533 - - - - - - - - -
10 MM dia. Cross Bars (b) @ 125 MM C/C Alt. Bent Back (SEC 5-5) 2 18.00 1 36 10 9.376 9.376 - 337.54 - - - - - -
10 MM dia. Cross Bars (b) @ 125 MM C/C Alt. Bent Back (SEC 5-5) 2 18.00 1 36 10 9.376 9.376 - 337.54 - - - - - -
10 MM dia. Extra Bars © @ 125 MM C/C Alt. Bent Back (Double Spacing) on Beam B16 at Top 2 18.00 1 36 10 1.552 0.100 1 1.632 - 58.75 - - - - - -
16 MM dia. Extra Bars @ 150 MM C/C Alt. Bent Back (Double Spacing) on Beam B3 at Top (SEC5-5) 2 30.00 1 60 16 6.573 0.100 1 6.641 - - - 398.46 - - - -
8 MM dia. Binders @ 200 MM C/C 0 17.00 1 0 8 5.238 5.238 - - - - - - - -
10 MM dia. Binders @ 200 MM C/C on Rear Projection Bottom & Top 2 15.00 2 60 10 5.238 5.238 - 314.28 - - - - - -
12 MM dia. Chairs 0 38.76 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
10 MM dia. Fasia Bars @ 150 MM C/C (SEC 4-4) 2 19.00 1 38 8 0.075 0.635 0.075 2 0.753 28.61 - - - - - - -
10 MM dia. Binders @ 150 MM C/C (Fasia) 2 5.00 1 10 8 5.163 5.163 51.63 - - - - - - -
d) Slab S4 (4.115*2.960)=1 4.115 2.960 - - - - - - - - -
63
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
8 MM dia. Cross Bars (b) @ 175 MM C/C Alt. Bent Back 2 9.00 1 18 8 4.735 4.735 85.23 - - - - - - -
8 MM dia. Cross Bars (b) @ 175 MM C/C Alt. Bent Back 2 8.00 1 16 8 5.263 5.263 84.20 - - - - - - -
8 MM dia. Extra Bars Bars © @ 175 MM C/C Alt. Bent Back (Double Spacing) on Beam B18 2 8.00 1 16 8 0.100 1.229 1 1.313 21.00 - - - - - - -
10 MM dia. Extra Bars Bars © @ 200 MM C/C Alt. Bent Back (Double Spacing) on Beam B4 2 2.00 1 4 10 0.100 1.085 1 1.165 - 4.66 - - - - - -
12 MM dia. Chairs 0 12 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - - -
e) Slab S5 (2.615*2.575)=1 2.615 2.575 - - - - - - - - -
12 MM dia. Chairs 0 7 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - - -
f) Slab S5 (2.416*1.850)=1 2.416 1.850 - - - - - - - - -
8 MM dia. Main Bars (a) @ 150 MM C/C 2 3.00 1 6 8 4.468 4.468 26.81 - - - - - - -
12 MM dia. Chairs 0 4 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - - -
g) Slab Size (1.118*6.660)=1 1.118 6.660 - - - - - - - - -
AS PER Plan - - - - - -
12 MM dia. Main Bars (a) @ 100 MM C/C 2 68 2 270 12 1.913 1.913 - - 517.28 - - - - -
12 MM dia. Cross Bars (b) @ 200 MM C/C 2 12 2 49 12 7.745 7.745 - - 377.34 - - - - -
12 MM dia. Chairs 0 7 1 0 12 0.386 0.600 0.386 4 1.276 - - - - - - - -
h) Slab S6 (4.034*8.885)=1 4.034 8.885 - - - - - - - - -
64
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
10 MM dia. Extra Bars Bars © @ 150 MM C/C Alt. Bent Back (Double Spacing) on Beam B16 2 30.00 1 60 10 1.646 1.646 - 98.73 - - - - - -
8 MM dia. Binders @ 200 MM C/C at Projection T & B 2 1.00 1 2 8 8.885 8.885 17.77 - - - - - - -
12 MM dia. Chairs 0 37.77 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - - -
i) Slab S1 (2.560*5.785)=1 (FRONT) 2.560 5.785 - - - - - - - - -
375 10 MM dia. Main Bars (a) @ 125 MM C/C Alt. Bent Back 2 24.00 1 48 10 3.105 3.105 - 149.04 - - - - - -
10 MM dia. Cross Bars (b) @ 125 MM C/C at Bottom (SEC 1-1) 2 21.00 1 42 10 10.095 10.095 - 423.99 - - - - - -
10 MM dia. Extra Bars © @ 125 MM C/C Alt. Bent Back (Double Spacing) on Beam B8 2 10.00 1 20 10 5.176 5.176 - 103.52 - - - - - -
16 MM dia. Extra Bars @ 125MM C/C at Top on Beam B8 2 20.00 1 40 16 6.730 6.730 - - - 269.20 - - - -
12 MM dia. Chairs 0 22.49 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
j) Slab S1 (2.560*5.785)=1 (FRONT) 2.560 5.785 - - - - - - - - -
12 MM dia. Chairs 0 22.49 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
k) Slab S1 (3.168*5.785)=1 (FRONT) 3.168 5.785 - - - - - - - - -
65
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
12 MM dia. Chairs 0 26.01 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
l) Slab S1 (1.627*5.785)=1 (FRONT) 1.627 5.785 - - - - - - - - -
12 MM dia. Chairs 0 17 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
10 MM dia. Binders @ 200 MM C/C on Front Projection Bottom & Top 2 15.00 2 60 10 9.75 9.748 - 584.88 - - - - - -
STEEL OF FRONT SIDE RCC WALL & PROJECTION - - - - - -
SEC 1-1 -
a) Wall Inner Side (L=9.038) - - - - - -
12 MM dia. Vertical Bars & 125 MM C/C 2 73.00 1 146 12 0.300 4.115 0.110 3 4.453 - - 650.14 - - - - -
10 MM dia. Binders @ 200 MM C/C Vertical Area 2 8.00 1 16 10 8.998 8.998 - 143.97 - - - - - -
b) Wall Outer Side (L=9.498) - - - - - -
25 MM dia. Extra Bars at Top 2 3 1 6 25 9.458 9.458 - - - - - 56.75 - -
SEC 1-1 -
a) Wall Inner Side (L=1.610) on Grid V6 - - - - - -
b) Wall Outer Side (L=1.840) On Grid V6 - - - - - -
66
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
SEC 1-1 -
a) Wall Inner Side (L=1.610) on Grid V8 - - - - - -
b) Wall Outer Side (L=1.840) On Grid V8 - - - - - -
SEC 2-2 (H6-H7/V6) -
a) Wall Inner Side (L=5.259) - - - - - -
10 MM dia. Binders @ 200 MM C/C at Top & Bottom - - - - - - -
Front Side (SEC 1-1) 2 13.00 2 52 10 11.510 11.510 - 598.52 - - - - - -
Left Side (SEC 1-1) on Grid V6 2 6.00 2 24 10 10.403 10.403 - 249.67 - - - - - -
Right Side (SEC 1-1) on Grid V8 2 6.00 2 24 10 3.760 3.760 - 90.24 - - - - - -
12 MM dia. Chairs 0 56 1 0 12 0.413 0.600 0.413 4 1.330 - - - - - - - -
m) Slab S2 (6.662*6.120)=1 (REAR) 6.662 6.120 - - - - - - - - -
10 MM dia. Main Bars (a) @ 125 MM C/C Alt. Bent Back (SEC 4-4) 2 27.00 1 54 10 9.907 9.907 - 534.98 - - - - - -
10 MM dia. Main Bars (a) @ 125 MM C/C Alt. Bent Back (SEC 4-4) 2 27.00 1 54 10 11.258 11.258 - 607.91 - - - - - -
10 MM dia. Cross Bars (b) @ 150 MM C/C at Bottom 2 21.00 1 42 10 7.427 7.427 - 311.93 - - - - - -
10 MM dia. Cross Bars (b) @ 150 MM C/C at Bottom 2 21.00 1 42 10 8.496 8.496 - 356.82 - - - - - -
12 MM dia. Extra Bars @ 100MM C/C at Top on Beam B1 2 67.00 1 134 12 5.180 5.180 - - 694.12 - - - - -
12 MM dia. Chairs 0 55.64 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
n) Slab S3 (4.115*6.120)=1 (REAR) 4.115 6.120 - - - - - - - - -
67
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
12 MM dia. Extra Bars @ 100MM C/C at Top on Beam B1 2 26.00 1 52 12 5.180 5.180 - - 269.36 - - - - -
12 MM dia. Chairs 0 30.94 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - - -
8 MM dia.Fasia Binders @ 175 MM C/C (SEC 4-4) 2 2.00 2 8 8 10.080 10.080 80.64 - - - - - - -
10 MM dia. Binders @ 200 MM C/C on Front Projection Bottom & Top 2 12.00 2 48 10 10.080 10.080 - 483.84 - - - - - -
L-Shaped Rear Side Projection at Beam Bottom Level - - - - - -
SEC 6-6 -
12 MM dia. Chimta @ 150 MM C/C 2 38.00 1 76 12 0.110 2.780 3 2.818 - - 214.17 - - - - -
12 MM dia. Chimta @ 150 MM C/C 2 68.00 1 136 12 0.110 4.080 3 4.118 - - 560.05 - - - - -
10 MM dia. Binders @ 200 MM C/C at Projection T & B 2 5.00 2 20 10 5.487 5.487 - 109.74 - - - - - -
10 MM dia. Binders @ 200 MM C/C at Projection T & B 2 7.00 2 28 10 12.080 12.080 - 338.24 - - - - - -
Overlaps 8 MM dia. at Bottom & Top 2 7.00 2 28 10 0.500 0.500 - 14.00 - - - - - -
12 MM dia. Chairs 0 21.85 1 0 12 0.386 0.600 0.386 4 1.276 - - - - - - - -
STEEL OF REAR SIDE RCC WALL & PROJECTION - - - - - -
SEC 4-4 -
a) Wall Inner Side (L=9.370-0.15-0.15=9.070) - - - - - -
12 MM dia. Vertical Bars & 125 MM C/C 2 61.00 1 122 10 0.300 0.635 0.110 3 0.985 - 120.17 - - - - - -
12 MM dia. Vertical Bars & 125 MM C/C 2 63.00 1 126 10 0.300 0.915 0.110 3 1.265 - 159.39 - - - - - -
10 MM dia. Binders @ 150 MM C/C at Top & Bottom - - - - - - -
Rear Side (SEC 4-4) 2 3.00 2 12 10 9.330 9.330 - 111.96 - - - - - -
- - - - -
C) STEEL OF STAIR CASES - - - - -
SEC 2-2 1.763 0.275 - - - - -
Bottom Bars 16 MM dia. 2 17.00 1 34 16 10.707 10.707 - - - 364.02 - - - -
Top Bars 16 MM dia. 2 17.00 1 34 16 10.707 10.707 - - - 364.02 - - - -
Face Bars 16 MM dia. 2 2.00 1 4 16 7.716 7.716 - - - 30.86 - - - -
Main Outer Ring Bar 10 dia @ 100 MM (16L) 2 96.00 1 192 10 3.406 0.430 0.200 5 3.936 - 755.71 - - - - - -
68
Err:509
AREA = DATE:- 12/30/1899
PROJECT 0
Reinforcement Steel
TOTAL LENGTH OF BARS IN RMT 5,929.12 22,730.88 4,661.81 2,593.76 1,518.18 4,810.84 - -
@ @ @ @ @ @ @ @
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313
69
Err:509
AREA = DATE:- 12/30/1899
PROJECT0
CLIENT:-M3M TOTAL MT 33.927
WORK:- BEAM , SLAB & MACHINE ROOM STEEL OF SECOND FLOOR ROOF
Reinforcement Steel
SECOND FLOOR ROOF
VILLAS
A) STEEL OF BEAMS -
COVER=30 MM
a) Bems B1 (600*600)=1 0.600 0.600 -
Spacer Bars 25 MM dia. At Bottom 0 10 1 0 25 0.540 0.540 - - - - - - -
Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
Spacer Bars 25 MM dia. At Top 0 3 2 0 25 0.540 0.540 - - - - - - -
2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - -
150 MM c/c (6L)
2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - -
200 MM c/c (6L)
2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - -
200 MM c/c (6L)
b) Bems B2 (600*600)=1 0.600 0.600 - - - - - - - -

Top Bars 25 MM dia. 2 6 1 12 25 0.400 11.712 0.400 2 12.412 - - - - - 148.94 -
2 94.00 1 188 10 1.080 1.080 0.200 5 2.260 - 424.88 - - - - -
150 MM c/c (6L)
2 94.00 1 188 10 0.648 1.080 0.200 5 1.828 - 343.66 - - - - -
200 MM c/c (6L)
2 94.00 1 188 10 0.216 1.080 0.200 5 1.396 - 262.45 - - - - -
200 MM c/c (6L)
c) Bems B3 (230*600)=1 0.230 0.600 - - - - - - - -
BEAM , SLAB MACHINE ROOM STEEL OF SECOND FLOOR ROOF Page 70 of 86

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
Top Bars 20 MM dia. 1 3 1 3 20 0.400 4.685 0.400 2 5.405 - - - - 16.22 - -
200 MM c/c (4L) 1 32.00 1 32 8 0.340 1.080 0.150 5 1.490 47.68 - - - - - -

0 33 1 0 8 0.113 1.080 0.160 5 1.273 - - - - - - -
MM c/c (4L)
d) Bems B3A (230*600)=1 0.230 0.600 - - - - - - - -
Top Bars 20 MM dia. 1 3 1 3 20 0.400 4.695 0.400 2 5.415 - - - - 16.25 - -

200 MM c/c (2L) 1 32.00 1 32 8 0.340 1.080 0.150 5 1.490 47.68 - - - - - -

0 33 1 0 8 0.113 1.080 0.160 5 1.273 - - - - - - -
MM c/c (4L)
e) Bems B4 (230*600)=1 0.230 0.600 - - - - - - - -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 7.302 0.400 2 8.022 - - - - 48.13 - -
Top Extra Bars 25 MM 2 3 1 6 20 0.400 1.465 1 1.825 - - - - 10.95 - -
Top Extra Bars 20 MM at Center 2 3 1 6 20 2.525 2.525 - - - - 15.15 - -
Top Extra Bars 20 MM at Joint V3 0 3 1 0 20 1.495 0.400 1 1.855 - - - - - - -
200 MM c/c (2L) 2 55.00 1 110 8 0.340 1.080 0.150 5 1.490 163.90 - - - - - -
f) Bems B5 (230*600, 300*600)=1 0.230 0.600 0.300 - - - - - - - -

Top Bars 25 MM dia. 2 3 1 6 25 0.400 7.275 0.400 2 7.975 - - - - - 47.85 -
Top Extra Bars 16 MM at Joint V1 2 2 1 4 16 0.400 1.240 1 1.608 - - - 6.43 - - -
Top Extra Bars 16 MM at Joint V2 2 2 1 4 16 4.440 0.400 4.840 - - - 19.36 - - -
200 MM c/c (2L) (230*600) 2 28.00 1 56 10 0.340 1.080 0.200 5 1.520 - 85.12 - - - - -

2 22.00 1 44 10 0.480 1.080 0.200 5 1.660 - 73.04 - - - - -
200 MM c/c (2L) (300*600)
g) Bems B6 (230*600)=1 0.230 0.600 - - - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
Top Bars 20 MM dia. 2 3 1 6 20 0.400 7.315 0.400 2 8.035 - - - - 48.21 - -
Top Extra Bars 20 MM 2 3 1 6 20 0.400 7.315 0.400 2 8.035 - - - - 48.21 - -
200 MM c/c (2L) (230*600) 2 39.00 1 78 8 0.340 1.080 0.150 5 1.490 116.22 - - - - - -
h) Bems B6A (150*600)=1 0.150 0.600 - - - - - - - -

Top Bars 20 MM dia. 2 2 1 4 20 0.400 2.560 0.400 2 3.280 - - - - 13.12 - -
Top Extra Bars 16 MM 2 2 1 4 16 0.400 2.560 0.400 2 3.296 - - - 13.18 - - -
2 22.00 1 44 8 0.180 1.080 0.150 5 1.330 58.52 - - - - - -
200 MM c/c (2L) (230*600)
i) Bems B7 (230*600)=1 0.230 0.600 - - - - - - - -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 7.265 0.400 2 7.985 - - - - 47.91 - -
Top Extra Bars 20 MM 2 3 1 6 20 0.400 7.265 0.400 2 7.985 - - - - 47.91 - -
200 MM c/c (2L) (230*600) 2 13.00 1 26 8 0.340 1.080 0.150 5 1.490 38.74 - - - - - -
j) Bems B8 (230*600. 300*600)=1 0.230 0.600 0.300 - - - - - - - -

Bottom Extra Bars 16 MM (H4-H5) 1 3 1 3 16 4.660 4.660 - - - 13.98 - - -
Top Bars 25 MM dia. 1 3 1 3 25 0.400 22.680 0.400 2 23.380 - - - - - 70.14 -
Overlaps 25 MM dia. at Top 1 3 1 3 25 1.250 1.250 - - - - - 3.75 -
Top Extra Bars 25 MM at Joint H1 1 3 1 3 25 0.400 2.490 1 2.840 - - - - - 8.52 -
Top Extra Bars 25 MM at Joint H2 1 3 1 3 25 3.600 3.600 - - - - - 10.80 -
Top Extra Bars 25 MM at Joint H5 1 3 1 3 25 4.370 0.400 4.770 - - - - - 14.31 -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
1 88.00 1 88 8 0.340 1.080 0.150 5 1.490 131.12 - - - - - -
200 MM c/c (2L) (230*600)

1 65.00 1 65 8 0.480 1.080 0.150 5 1.630 105.95 - - - - - -
200 MM c/c (2L) (300*600)
k) Bems B9 (450*200)=2 0.450 0.200 - - - - - - - -

Top Bars 25 MM dia. 2 4 1 8 25 0.133 8.640 0.133 2 8.806 - - - - - 70.45 -
2 55.00 1 110 8 0.780 0.280 0.150 5 1.130 124.30 - - - - - -
200 MM c/c (4L) (450*200)
2 55.00 1 110 8 0.260 0.280 0.150 5 0.610 67.10 - - - - - -
200 MM c/c (4L) (450*200)
k) Bems B9 (450*200)=2 0.450 0.200 - - - - - - - -
Top Bars 25 MM dia. 2 4 1 8 25 0.133 7.220 0.133 2 7.386 - - - - - 59.09 -
2 44.00 1 88 8 0.780 0.280 0.150 5 1.130 99.44 - - - - - -
200 MM c/c (4L) (450*200)
2 44.00 1 88 8 0.260 0.280 0.150 5 0.610 53.68 - - - - - -
200 MM c/c (4L) (450*200)
l) Bems B10 (230*600)=1 0.230 0.600 - - - - - - - -
Top Bars 16 MM dia. 2 3 1 6 16 0.400 2.955 0.400 2 3.691 - - - 22.15 - - -
(2L) 2 21.00 1 42 8 0.340 1.080 0.150 5 1.490 62.58 - - - - - -
m) Bems B11 (375*600)=1 0.375 0.600 - - - - - - - -

Top Bars 25 MM dia. 2 4 1 8 25 0.400 14.770 0.400 2 15.470 - - - - - 123.76 -
Top Extra Bars 20 MM at Joint H4 2 4 1 8 20 0.400 1.790 1 2.150 - - - - 17.20 - -
2 101.00 1 202 8 0.630 1.080 0.150 5 1.780 359.56 - - - - - -
200 MM c/c (4L)
2 101.00 1 202 8 0.210 1.080 0.150 5 1.360 274.72 - - - - - -
MM c/c (4L)

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
n) Bems B12 (375*600)=1 0.375 0.600 - - - - - - - -
Overlaps 20 MM dia. at Bottom 2 3 1 6 20 1.000 1.000 - - - - 6.00 - -
Top Bars 20 MM dia. 2 3 1 6 20 0.400 13.597 0.400 2 14.317 - - - - 85.90 - -
Overlaps 20 MM dia. at Bottom 2 3 1 6 20 1.000 1.000 - - - - 6.00 - -
Top Extra Bars 20 MM 2 3 1 6 20 0.400 1.890 1 2.250 - - - - 13.50 - -
Top Extra Bars 20 MM at Joint H2 2 3 1 6 20 3.750 3.750 - - - - 22.50 - -
200 MM c/c (2L) 2 83.00 1 166 8 0.630 1.080 0.150 5 1.780 295.48 - - - - - -
o) Bems B13 (375*600)=1 0.375 0.600 - - - - - - - -

Top Bars 25 MM dia. 2 4 1 8 25 0.400 10.753 0.400 2 11.453 - - - - - 91.62 -
Top Extra Bars 25 MM 2 4 1 8 25 0.400 10.753 0.400 1 11.503 - - - - - 92.02 -
200 MM c/c (4L) 2 79.00 1 158 10 0.630 1.080 0.200 5 1.810 - 285.98 - - - - -

2 79.00 1 158 10 0.210 1.080 0.200 5 1.390 - 219.62 - - - - -
200 MM c/c (4L)
p) Bems B14 (230*600. 300*600)=1 0.230 0.600 0.300 - - - - - - - -
Top Bars 25 MM dia. 1 3 1 3 25 0.400 22.680 0.400 2 23.380 - - - - - 70.14 -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
Top Extra Bars 25 MM at Joint H5 1 3 1 3 25 4.370 0.400 4.770 - - - - - 14.31 -
1 120.00 1 120 8 0.340 1.080 0.150 5 1.490 178.80 - - - - - -
200 MM c/c (2L) (230*600)
1 39.00 1 39 8 0.480 1.080 0.150 5 1.630 63.57 - - - - - -
200 MM c/c (2L) (300*600)
q) Bems B15 (375*600)=1 0.375 0.600 - - - - - - - -
Top Bars 25 MM dia. 2 3 1 6 25 0.400 9.528 0.400 2 10.228 - - - - - 61.37 -
Top Extra Bars 25 MM at Joint V3 2 3 1 6 25 1.440 0.400 1.840 - - - - - 11.04 -
Top Extra Bars 25 MM at Joint V4 2 3 1 6 25 2.675 2.675 - - - - - 16.05 -
2 68.00 1 136 8 0.630 1.080 0.150 5 1.780 242.08 - - - - - -
200 MM c/c (2L)
0 68.00 1 0 8 0.210 1.080 0.150 5 1.360 - - - - - - -
MM c/c (2L)
r) Bems B16 (300*300)=1 0.300 0.300 - - - - - - - -
Top Bars 20 MM dia. 2 3 1 6 20 0.200 4.722 0.200 2 5.042 - - - - 30.25 - -
2 32.00 1 64 8 0.480 0.480 0.150 5 1.030 65.92 - - - - - -
200 MM c/c (2L)
s) Bems B17 (300*600, 450*600)=1 0.300 0.600 0.450 - - - - - - - -
Bottom Bars 25 MM dia. (V3-V6) 1 2 1 2 25 0.400 10.305 0.400 2 11.005 - - - - - 22.01 -
Top Bars 25 MM dia. 1 3 1 3 25 0.400 19.199 0.400 2 19.899 - - - - - 59.70 -
Top Bars 25 MM dia. (V3-V6) 1 2 1 2 25 0.400 10.305 0.400 2 11.005 - - - - - 22.01 -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
Top Extra Bars 25 MM 1 3 1 3 25 0.400 1.465 1 1.815 - - - - - 5.44 -
Top Extra Bars 25 MM at Joint V3 1 1 1 1 25 0.400 2.865 1 3.215 - - - - - 3.22 -
Top Extra Bars 25 MM at Joint V6 1 1 1 1 25 2.865 0.400 1 3.215 - - - - - 3.22 -
Top Extra Bars 25 MM 1 3 1 3 25 1.465 0.400 1 1.815 - - - - - 5.44 -

1 64.00 1 64 8 0.480 1.080 0.150 5 1.630 104.32 - - - - - -
200 MM c/c (2L) (300*600)

1 74.00 1 74 8 0.780 1.080 0.150 5 1.930 142.82 - - - - - -
200 MM c/c (2L) (450*600)
t) Bems B18 (375*600)=1 0.375 0.600 - - - - - - - -
Bottom Extra Bars 25 MM 2 4 1 8 20 8.173 - 8.173 - - - - 65.38 - -
Top Bars 25 MM dia. 2 4 1 8 25 0.400 11.363 0.400 2 12.063 - - - - - 96.50 -
Top Extra Bars 25 MM 2 4 1 8 25 0.400 11.363 0.400 2 12.063 - - - - - 96.50 -
2 87.00 1 174 10 0.630 1.080 0.200 5 1.810 - 314.94 - - - - -
150 MM c/c (4L)
150 MM c/c (4L) 2 87.00 1 174 10 0.210 1.080 0.200 5 1.390 - 241.86 - - - - -
- - - - - - - -
B) STEEL OF SLAB - - - - - - - -
COVER=20 MM - - - - - - - -
a) Slab S1 (6.662*4.607)=1 6.662 4.607 - - - - - - - -
Alt. Bent Back 2 18.00 1 36 10 5.397 5.397 - 194.29 - - - - -

2 18.00 1 36 10 6.947 6.947 - 250.09 - - - - -
Alt. Bent Back
2 8.00 1 16 10 6.927 6.927 - 110.83 - - - - -
Alt. Bent Back
2 8.00 1 16 10 5.667 5.667 - 90.67 - - - - -
Alt. Bent Back
2 11.00 1 22 10 7.352 7.352 - 161.74 - - - - -
Alt. Bent Back
Alt. Bent Back 2 11.00 1 22 10 8.220 8.220 - 180.84 - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
2 5.00 1 10 10 7.352 7.352 - 73.52 - - - - -
Alt. Bent Back
Alt. Bent Back 2 5.00 1 10 10 7.934 7.934 - 79.34 - - - - -

Alt. Bent Back (Double Spacing) on Beam B4 2 17.00 1 34 10 0.100 1.352 1 1.432 - 48.68 - - - - -


Alt. Bent Back (Double Spacing) on Beam B11 0 15.86 1 0 10 0.100 2.040 1 2.121 - - - - - - -
8 MM dia. Binders @ 200 MM C/C 2 8.00 2 32 8 2.764 2.764 88.45 - - - - - -

12 MM dia. Chairs 0 30.69 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - -
b) Slab S1 (3.106*6.120)=1 (Rear) 3.106 6.120 - - - - - - - -
SEC 1-1 - - - - - - - -
Alt. Bent Back 2 25.00 1 50 10 3.871 3.871 - 193.55 - - - - -

Alt. Bent Back 2 25.00 1 50 10 4.678 4.678 - 233.88 - - - - -

Alt. Bent Back 2 11.00 1 22 10 8.680 0.350 1 9.010 - 198.22 - - - - -

2 11.00 1 22 10 9.601 0.350 1 9.931 - 218.49 - - - - -
Alt. Bent Back
2 21.00 1 42 16 3.480 0.100 1 3.548 - - - 149.02 - - -
Top on Beam B1

2 24.00 1 48 10 0.100 1.122 1 1.202 - 57.67 - - - - -

12 MM dia. Chairs 0 19.01 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - -
c) Slab S1 (3.106*6.120)=1 (Rear) 3.106 6.120 - - - - - - - -
SEC 1-1 - - - - - - - -
2 25.00 1 50 10 4.678 4.678 - 233.88 - - - - -
Alt. Bent Back
2 25.00 1 50 10 4.466 4.466 - 223.28 - - - - -
Alt. Bent Back
Alt. Bent Back 2 11.00 1 22 10 8.680 0.350 1 9.010 - 198.22 - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
2 11.00 1 22 10 9.601 0.350 1 9.931 - 218.49 - - - - -
Alt. Bent Back
Top on Beam B1 2 21.00 1 42 16 3.480 0.100 1 3.548 - - - 149.02 - - -

12 MM dia. Chairs 0 19.01 1 0 12 0.415 0.600 0.415 4 1.334 - - - - - - -
d) Slab S2 (2.258*6.120)=1 (Rear) 2.258 6.120 - - - - - - - -
SEC 1-1 - - - - - - - -
Alt. Bent Back 2 21.00 1 42 10 3.830 3.830 - 160.84 - - - - -

Alt. Bent Back 2 21.00 1 42 10 3.406 3.406 - 143.05 - - - - -

Alt. Bent Back 2 6.00 1 12 10 8.660 0.350 1 8.990 - 107.88 - - - - -

2 6.00 1 12 10 9.321 0.350 1 9.651 - 115.81 - - - - -
Alt. Bent Back
2 16.00 1 32 16 3.480 0.100 1 3.548 - - - 113.54 - - -
Top on Beam B1
12 MM dia. Chairs 0 13.82 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
e) Slab S2 (1.412*6.120)=1 (Rear) 1.412 6.120 - - - - - - - -
2 21.00 1 42 10 2.102 2.102 - 88.28 - - - - -
Alt. Bent Back
2 21.00 1 42 10 2.697 2.697 - 113.25 - - - - -
Alt. Bent Back
Alt. Bent Back 2 4.00 1 8 10 7.260 7.260 - 58.08 - - - - -

Alt. Bent Back 2 4.00 1 8 10 7.911 7.911 - 63.29 - - - - -



12 MM dia. Chairs 0 8.64 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
f) Slab S2 (4.190*3.105)=1 4.190 3.105 - - - - - - - -
2.990 2 10.00 1 20 10 4.549 4.549 - 90.98 - - - - -
Alt. Bent Back
Alt. Bent Back 2 10.00 1 20 10 5.435 5.435 - 108.70 - - - - -

Alt. Bent Back 2 4.00 1 8 10 3.875 3.875 - 31.00 - - - - -

Alt. Bent Back 2 4.00 1 8 10 5.405 5.405 - 43.24 - - - - -

2 8.00 1 16 10 4.735 4.735 - 75.76 - - - - -
Alt. Bent Back
2 8.00 1 16 10 6.295 6.295 - 100.72 - - - - -
Alt. Bent Back

2 8.00 1 16 10 0.100 1.248 1 1.328 - 21.24 - - - - -

Alt. Bent Back (Double Spacing) on Beam 2 4.00 1 8 10 0.100 0.976 1 1.056 - 8.45 - - - - -
B3A
12 MM dia. Chairs 0 13.01 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
g) Slab S3 (2.760*2.575)=1 2.760 2.575 - - - - - - - -
2 10.00 1 20 8 3.781 3.781 75.63 - - - - - -
Bent Back
2 10.00 1 20 8 4.670 4.670 93.40 - - - - - -
Bent Back
8MM dia. Cross Bars (b) @ 175 MM C/C Alt.
Bent Back 2 8.00 1 16 8 3.305 3.305 52.88 - - - - - -
8MM dia. Cross Bars (b) @ 175 MM C/C Alt.

Bent Back 2 8.00 1 16 8 3.778 3.778 60.45 - - - - - -

Alt. Bent Back (Double Spacing) on Beam B11 2 7.00 1 14 8 0.100 0.890 1 0.974 13.64 - - - - - -

Alt. Bent Back (Double Spacing) on Beam B10 0 8.39 1 0 8 0.100 0.874 1 0.958 - - - - - - -

12 MM dia. Chairs 0 7.11 1 0 12 0.250 0.600 0.390 4 1.144 - - - - - - -
h) Slab S3 (4.072*1.003)=1 4.072 1.003 - - - - - - - -
8 MM dia. Main Bars (a) @ 150 MM C/C 2 14.00 1 28 8 1.548 1.548 43.34 - - - - - -
8MM dia. Cross Bars (b) @ 175 MM C/C 2 7.00 1 14 8 4.762 4.762 66.67 - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel

2 14.00 1 28 8 0.100 0.451 1 0.535 14.97 - - - - - -

12 MM dia. Chairs 0 4.08 2 0 12 0.250 0.600 0.390 4 1.144 - - - - - - -
i) Slab S3 (2.215*1.003)=1 2.215 1.003 - - - - - - - -

2 3.00 1 6 8 0.100 0.899 1 0.983 5.90 - - - - - -

12 MM dia. Chairs 0 2.22 2 0 12 0.250 0.600 0.390 4 1.144 - - - - - - -
j) Slab S2 (2.740*6.660)=1 2.740 6.660 - - - - - - - -
Alt. Bent Back 2 23.00 1 46 10 3.430 3.430 - 157.78 - - - - -

Alt. Bent Back 2 23.00 1 46 10 4.386 4.386 - 201.77 - - - - -

Alt. Bent Back 2 7.00 1 14 10 7.130 7.130 - 99.82 - - - - -

2 7.00 1 14 10 7.411 7.411 - 103.75 - - - - -
Alt. Bent Back

2 22.00 1 44 10 0.100 1.030 1 1.110 - 48.84 - - - - -

2 7.00 1 14 10 0.100 1.865 1 1.945 - 27.23 - - - - -

0 7.35 1 0 10 0.100 1.895 1 1.975 - - - - - - -

12 MM dia. Chairs 0 18.25 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
k) Slab S2 (3.765*6.660)=1 3.665 6.660 - - - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
2 23.00 1 46 10 4.210 4.210 - 193.66 - - - - -
Alt. Bent Back
Alt. Bent Back 2 23.00 1 46 10 4.925 4.925 - 226.55 - - - - -

2.465 Alt. Bent Back 2 7.00 1 14 10 7.060 7.060 - 98.84 - - - - -

Alt. Bent Back 2 7.00 1 14 10 7.744 7.744 - 108.41 - - - - -

2 3.00 1 6 10 7.060 7.060 - 42.36 - - - - -
Alt. Bent Back
2 3.00 1 6 10 7.060 7.060 - 42.36 - - - - -
Alt. Bent Back

2 22.00 1 44 10 0.100 1.116 1 1.196 - 52.64 - - - - -

2 9.00 1 18 10 0.100 1.865 1 1.945 - 35.01 - - - - -

12 MM dia. Chairs 0 24.41 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
l) Slab S2 (4.072*3.783)=1 4.072 3.783 - - - - - - - -
2 14.00 1 28 10 4.679 4.679 - 131.00 - - - - -
Alt. Bent Back
2 14.00 1 28 10 5.667 5.667 - 158.67 - - - - -
Alt. Bent Back
Alt. Bent Back 2 8.00 1 16 10 5.804 0.110 1 5.894 - 94.30 - - - - -

Alt. Bent Back 2 8.00 1 16 10 5.804 0.110 1 5.894 - 94.30 - - - - -

Alt. Bent Back 2 5.00 1 10 10 4.782 4.782 - 47.82 - - - - -
12MM dia. Extra Bars @ 150 MM C/C at

2 25.00 1 50 12 0.260 2.877 1 3.113 - - 155.65 - - - -
Top on Beam B18 (SEC 3-3)
12 MM dia. Chairs 0 15.40 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
m) Slab S2 (4.072*4.955)=1 4.072 4.955 - - - - - - - -
2 14.00 1 28 10 5.804 0.110 1 5.894 - 165.03 - - - - -
Alt. Bent Back
2 14.00 1 28 10 5.804 0.110 1 5.894 - 165.03 - - - - -
Alt. Bent Back
2 6.00 1 12 10 4.782 4.782 - 57.38 - - - - -
Alt. Bent Back

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
2 11.00 1 22 10 7.235 0.110 1 7.325 - 161.15 - - - - -
Alt. Bent Back
Alt. Bent Back 2 11.00 1 22 10 8.181 0.110 1 8.271 - 181.96 - - - - -

Top on Beam B18 (SEC 3-3) 2 33.00 1 66 12 0.260 2.877 1 3.113 - - 205.46 - - - -

Top on Beam B18 (SEC 5-5) 2 27.00 1 54 12 3.800 0.110 1 3.886 - - 209.84 - - - -

12 MM dia. Chairs 0 20.18 1 0 12 0.390 0.600 0.390 4 1.284 - - - - - - -
n) Slab S3 (2.640*2.220)=1 2.640 2.220 - - - - - - - -
12 MM dia. Chairs 0 5.86 2 0 12 0.250 0.600 0.390 4 1.144 - - - - - - -
Front Side Projection in between Grid (V3-
o) 9.656 0.840 - - - - - - - -
V6)/H6 (L=9.656)
10 MM dia. Main Bars (a) @ 150 MM C/C at
1 65.00 1 65 10 2.820 0.110 1 2.910 - 189.15 - - - - -
Bottom
Top on Beam B17 at Top (SEC 5-5) 1 64.00 1 64 12 2.820 0.110 1 2.906 - - 185.98 - - - -
10 MM dia. Binders @ 200 MM C/C at Top &

2 4.00 2 16 10 9.656 9.656 - 154.50 - - - - -
Bottom (SEC 5-5)
12 MM dia. Chairs 0 8.11 1 0 12 0.388 0.600 0.388 4 1.280 - - - - - - -
Front Side Projection in between Grid (V3-
9.656 0.909 - - - - - - - -
V6)/H4 (L=9.656)

1 65.00 1 65 10 2.697 0.110 1 2.787 - 181.16 - - - - -
Bottom
Top on Beam B17 at Top (SEC 5-5) 1 64.00 1 64 12 2.697 0.110 1 2.783 - - 178.11 - - - -

Bottom (SEC 5-5) 2 13.00 2 52 10 9.656 9.656 - 502.11 - - - - -
12 MM dia. Chairs 0 22.81 1 0 12 0.388 0.600 0.388 4 1.280 - - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
Bottom at Cut Out Left and Right Side 2 6.00 2 24 10 7.297 7.297 - 175.13 - - - - -
Projections 1022 MM Wide. (SEC 3-3)
12 MM dia. Chairs 0 9.25 2 0 12 0.388 0.600 0.388 4 1.280 - - - - - - -
Front Side Projection on Grid H6 (L=7.011) - - - - - - - -
2 19.00 1 38 12 0.110 2.590 0.110 2 2.762 - - 104.96 - - - -
Bottom (Sec 4-4)
2 19.00 1 38 12 0.260 2.590 0.110 2 2.912 - - 110.66 - - - -
Top on Beam B7 at Top (SEC 5-5)
Bottom (SEC 4-4) 2 4.00 2 16 10 2.640 2.640 - 42.24 - - - - -
25 MM dia. Extra Bars at Top 2 3.00 1 6 25 3.246 3.246 - - - - - 19.48 -

Bottom (L-4.370) 2 29.00 1 58 12 0.110 1.990 0.110 2 2.162 - - 125.40 - - - -

2 29.00 1 58 12 0.260 1.990 0.110 2 2.312 - - 134.10 - - - -
Top on Beam B7 at Top (SEC 5-5)

1 10.00 2 20 10 33.655 33.655 - 673.10 - - - - -
Bottom (SEC 5-5) at Front Side Projection.
Overlaps 10 MM dia. 1 20.00 2 40 10 0.500 0.500 - 20.00 - - - - -

12 MM dia. Chairs (Front Projection) 0 60.65 1 0 12 0.388 0.600 0.388 4 1.280 - - - - - - -
p) RCC WALLS - - - - - - - -
a) RCC WALL ON B 4 (H=1.600 M) - - - - - - - -
Wall (L=4.072) - - - - - - - -
12 MM dia. Vertical Bars & 150 MM C/C 2 27.00 1 54 12 4.890 4 4.794 - - 258.88 - - - -
2 9.00 2 36 12 4.742 4.742 - - 170.71 - - - -
Face & Outer Face
b) RCC WALL ON B13(H=1.600 M) - - - - - - - -
Wall (L=9.898) - - - - - - - -
Face & Outer Face 2 9.00 2 36 12 10.793 10.793 - - 388.55 - - - -

c) RCC WALL ON B7 (H=1.600 M) - - - - - - - -
Wall (L=2.416) - - - - - - - -
2 9.00 2 36 12 3.166 3.166 - - 113.98 - - - -
Face & Outer Face
d) RCC WALL ON GRID V1 (H1-H6) (H=1.600 M) - - - - - - - -

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
SEC 2-2 - - - - - - - -
Wall (L=22.800-1.2-1.2-0.6-0.6-0.6-
- - - - - - - -
0.23=18.370))
Face & Outer Face 1 8.00 2 16 12 22.720 22.720 - - 363.52 - - - -
Overlaps 12 MM dia. 1 8.00 2 16 12 0.600 0.600 - - 9.60 - - - -

Overlaps 25 MM dia. 1 3.00 2 6 25 1.250 1.250 - - - - - 7.50 -
375 MM Wide Projection ON GRID V1 (H1-
- - - - - - - -
H6) (L=22.80)
12 MM dia. Chimpta @ 100 MM C/C 1 185.00 1 185 12 1.575 4 1.479 - - 273.61 - - - -
1 3.00 2 6 10 22.760 22.760 - 136.56 - - - - -
Bottom (SEC 2-2)
Overlaps 10 MM dia. 1 3.00 2 6 10 0.500 0.500 - 3.00 - - - - -
12 MM dia. Chairs 0 8.55 1 0 12 0.386 0.600 0.388 4 1.278 - - - - - - -
e) RCC WALL ON B 1 (H=1.600 M) - - - - - - - -
SEC 1-1 (U Shaped RCC Wall) (Rear Side) - - - - - - - -
(V1-V3 & V6-V8) - - - - - - - -
Wall Inner Side
a) - - - - - - - -
(L=9.660+1.170+1.170=12.00)
12 MM dia. Z Bars & 150 MM C/C 2 76.00 1 152 12 1.940 0.110 3 1.978 - - 300.66 - - - -
12 MM dia. Z Bars & 150 MM C/C 2 76.00 1 152 12 1.940 0.110 3 1.978 - - 300.66 - - - -
Face & Outer Face 2 9.00 2 36 12 11.290 11.290 - - 406.44 - - - -

Projection Top & Bottom 2 6.00 2 24 10 10.080 10.080 - 241.92 - - - - -
STEEL OF PROJECTION AT 1150 MM HEIGHT

at sec 1-1 - - - - - - - -
12 MM dia Bottom Bars (a) 100 MM C/C 2 84.00 1 168 12 0.110 2.190 0.110 2 2.362 - - 396.82 - - - -
2 11.00 1 22 10 8.245 8.245 - 181.39 - - - - -
Bottom
12 MM dia Top Bars (a) 100 MM C/C 2 84.00 1 168 12 0.110 2.190 0.110 2 2.362 - - 396.82 - - - -
10 MM dia. Binders @ 200 MM C/C 2 11.00 1 22 10 8.245 8.245 - 181.39 - - - - -
10 MM Fasia Bars 200 MM C/C 2 2.00 1 4 10 8.245 8.245 - 32.98 - - - - -
12 MM dia Bottom Bars (a) 100 MM C/C 2 18.00 1 36 12 0.110 1.590 0.110 2 1.762 - - 63.43 - - - -
2 8.00 1 16 10 1.795 1.795 - 28.72 - - - - -
Bottom

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
12 MM dia. Chairs 0 16.57 1 0 12 0.386 0.600 0.388 4 1.278 - - - - - - -
SLAB SIZE (2.088*2.810) - - - - - - - -
12 MM dia Bottom Bars (a) 100 MM C/C 2 21.00 1 42 12 3.360 0.110 2 3.422 - - 143.72 - - - -
2 15.00 1 30 10 2.048 2.048 - 61.44 - - - - -
Bottom
12 MM dia. Chairs 0 5.87 1 0 12 0.386 0.600 0.388 4 1.278 - - - - - - -
SLAB SIZE (0.85*1.630) - - - - - - - -
12 MM dia Bottom Bars (a) 100 MM C/C 2 9.00 1 18 12 1.590 0.110 2 1.652 - - 29.74 - - - -
2 9.00 1 18 10 0.810 0.810 - 14.58 - - - - -
Bottom
12 MM dia. Chairs 0 1.39 1 0 12 0.386 0.600 0.388 4 1.278 - - - - - - -
- - - - - - - -
STEEL OF MACHINE ROOM ROOF - - - - - - - -
a) Bems B1 (230*375)=4 0.230 0.375 - - - - - - - -
Bottom Bars 20 MM dia. 2 3.00 4 24 20 0.315 2.640 0.315 2 3.190 - - - - 76.56 - -
Top Bars 20 MM dia. 2 3.00 4 24 20 0.315 2.640 0.315 2 3.190 - - - - 76.56 - -

2 16.00 4 128 8 0.340 0.630 0.150 5 1.040 133.12 - - - - - -
(230*375)
b) Slab (2803*2680)=1 2.343 2.220 - - - - - - - -
BOTTOM JALL - - - - - - - -
10 MM dia. Main Bars Bars @ 150 MM C/C 1 17.00 1 17 10 2.640 2.640 - 44.88 - - - - -
8 MM dia. Cross Bars @ 200 MM C/C 1 12.00 1 12 8 2.763 2.763 33.16 - - - - - -
TOP JALL - - - - - - - -
10 MM dia. Main Bars Bars @ 150 MM C/C 1 17.00 1 17 10 2.640 2.640 - 44.88 - - - - -
8 MM dia. Cross Bars @ 200 MM C/C 1 12.00 1 12 8 2.763 2.763 33.16 - - - - - -
12 MM dia. Chairs 0 5.20 1 0 10 0.386 0.600 0.386 4 1.292 - - - - - - -
-
TOTAL LENGTH OF BARS IN RMT 5,343.27 13,386.61 7,345.28 645.42 1,099.95 3,451.82 - -
@ @ @ @ @ @ @ @

Err:509
AREA = DATE:- 12/30/1899
PROJECT0
Reinforcement Steel
0.395 0.617 0.888 1.578 2.466 3.854 4.830 6.313

2. m3m, Panipat Villa (Bbs) 25102024

Uploaded by

Copyright:

Available Formats

2. m3m, Panipat Villa (Bbs) 25102024

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2. m3m, Panipat Villa (Bbs) 25102024

Uploaded by

Copyright:

Available Formats

CLIENT :- M3M

PROJECT :- TOWNSHIP, SECTOR 36/37, PANIPAT, HARYANA

1 FOOTINGS KG 24400.638 23296.000 1104.638 Checked

10 SECOND FLOOR ROOF SLAB KG 38734.135 33927.003 4807.132 Checked

TOTAL KG 292497.338 272025.071 20472.267

TOTAL MT 292.497 272.025 20.472

GRAND TOTAL OF STEEL KG 23,295.61

Nos. of Total No. Of Cutting Total Length of Bar Dai wise

OUTER FACE 10.472 - - - - - - - -

b) Overlaps Vertical Bars 12 dia. 2 52.00 1 104 12 0.600 0.600 - - 62.40 - - - - -

d) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Binder 2 24.00 1 48 10 11.772 11.772 - 565.06 - - - - - -

e) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -

INNER FACE 10.472 - - - - - - - -

OUTER FACE 10.172 - - - - - - - -

b) Overlaps Vertical Bars 12 dia. 2 51.00 1 102 12 0.600 0.600 - - 61.20 - - - - -

d) 10 MM dia. Binders @ 200 C/C - - - - - - - -

e) Overlaps 10 MM dia. 0 24.00 1 0 10 0.500 0.500 - - - - - - - -

INNER FACE 10.172 - - - - - - - -

b) Overlaps Vertical Bars 12 dia. 2 186.00 1 372 12 0.600 0.600 - - 223.20 - - - - -

e) Overlaps 10 MM dia. 2 72.00 1 144 10 0.500 0.500 - 72.00 - - - - - -

INNER FACE 37.251 - - - - - - - -

Wall in between Grids (Y-X)/V3 &

TOTAL LENGTH OF WALL (L=45.201-0.45-0.45-1.200-0.45-0.45-1.200-1.200-0.75-

b) Overlaps Vertical Bars 12 dia. 2 193.00 1 386 12 0.600 0.600 - - 231.60 - - - - -

d) 10 MM dia. Binders @ 200 C/C - - - - - - - -

e) Overlaps 10 MM dia. 2 72 1 144 10 0.500 0.500 - 72.00 - - - - - -

INNER FACE 38.601 - - - - - - - -

OUTER FACE 10.472 - - - - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Binder 2 4.00 1 8 10 11.772 11.772 - 94.18 - - - - - -

INNER FACE 10.472 - - - - - - - -

OUTER FACE 5.569 - - - - - - - -

a) Vertical Bars 12 dia. @ 200 MM C/C 2 28.00 1 56 12 0.520 0.520 - - 29.12 - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Height =(4.600-4.080=0.520) 0.520 - - - - - - - -

Binder 2 3.00 1 6 10 6.939 6.939 - 41.63 - - - - - -

INNER FACE 5.569 - - - - - - - -

Binder 2 3.00 1 6 10 6.939 - 6.939 - 41.63 - - - - - -

10 dia. Spacer Bars 0 3 1 0 10 1.046 2 1.006 - - - - - - - -

OUTER FACE 2.690 - - - - - - - -

a) Vertical Bars 12 dia. @ 200 MM C/C 2 13.00 1 26 12 0.550 0.550 - - 14.30 - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Binder 2 3.00 1 6 10 3.080 3.080 - 18.48 - - - - - -

INNER FACE 2.690 - - - - - - - -

a) Vertical Bars 12 dia. @ 150 MM C/C 2 18.00 1 36 12 0.550 0.550 - - 19.80 - - - - -

b) 10 MM dia. Binders @ 200 C/C - - - - - - - -

TOTAL LENGTH OF WALL (L=18.060-0.75-1.2-1.2-0.6-0.6=13.710) - - - - - - - -

OUTER FACE 9.576 - - - - - - - -

a) Vertical Bars 12 dia. @ 200 MM C/C 2 48.00 1 96 12 0.520 0.520 - - 49.92 - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Binder 2 3.00 1 6 10 10.716 10.716 - 64.30 - - - - - -

b) 10 MM dia. Binders @ 200 C/C - - - - - - - -

TOTAL LENGTH OF WALL (L=2.740) - - - - - - - -

OUTER FACE 2.740 - - - - - - - -

a) Vertical Bars 12 dia. @ 200 MM C/C 0 14 1 0 12 0.520 0.520 - - - - - - - -

b) Vertical Bars (Extra) 12 dia. @ 200 MM C/C 0 14 1 0 12 0.520 0.520 - - - - - - - -

c) 10 MM dia. Binders @ 200 C/C - - - - - - - -

Binder 0 4 1 0 10 2.680 2.680 - - - - - - - -

INNER FACE 2.740 - - - - - - - -