1-888-282-9891
AVAILABLE
with Signature Ultra Precision Compression
Calibration
SEE PG. IN-5 Canister Load Cell
Model WG
0.03% LINEARITY & HYSTERESIS
10,000-500,000 lb.
ALL-WELDED DESIGN Model 415
(0.1%)
Gage:
STAINLESS STEEL Order Code AP411
Absolute:
Order Code AP412
PERFORMANCE Load Ranges ................................ 10,000 to 500,000 lb.
Linearity ........................................ 0.03%*
Hysteresis..................................... 0.03%*
Non-Repeatability (max)............... ±0.01% F.S.
Output........................................... 2mV/V
Resolution .................................... Infinite
Creep (max) ................................. 0.03% (20 min.)
ENVIRONMENTAL Temperature, Operating ............... -30° to 185° F
LOAD
Temperature, Compensated ........ 60° to 160° F
Temperature Effect
– Zero (max)............................. 0.0015% F.S./ ° F
– Span (max)............................ 0.0008% Rdg./ ° F
ELECTRICAL Strain Gage Type ......................... Bonded Foil
ULTRA PRECISION COMPRESSION
Excitation (calibration) .................. 10VDC
Bridge Resistance ........................ 350 ohms
Wiring Code (std) ......................... #2 (See Pg. AP-6)
Electrical Termination (std) .......... MS3102E-14S-6P
Mating Connector (not incl.) ......... MS3106A-14S-6S
MECHANICAL Static Overload Capacity.............. 50% over capacity
Casing Material ............................ Stainless steel
Deflection—Full Scale .................. 0.0031"
Note * 0.05% at ranges >75,000 lb.
Dimensions
Model WG (Order Code BL125)
Ranges D1” D2” D3" H” T” A”
10,000; 15,000; 25,000; 50,000 lb. 2.88 (7.32 cm) 1.25 (3.18 cm) 2.12 (5.38 cm) 3.25 (8.26 cm) 1/2-20 UNF-2B 0.40 (1.02 cm)
100,000 lb. 4.12 (10.46 cm) 2.31 (5.87 cm) 3.66 (9.30 cm) 5.00 (12.70 cm) 3/4-16 UNF-2B 0.51 (1.30 cm)
200,000; 300,000 lb. 6.00 (15.24 cm) 3.13 (7.95 cm) 5.31 (13.49 cm) 7.25 (18.42 cm) 3/4-16 UNF-2B 0.88 (2.64 cm)
500,000 lb. 6.50 (16.51 cm) 3.69 (9.37 cm) 5.81(14.76 cm) 9.00 (22.86 cm) 3/4-16 UNF-2B 0.56 (1.42 cm)
Options (See Appendix)
Temperature compensated 1b, 1c; Electrical termination 6a, 6e, 6f, 6g, 6h, 6i, 6j; Int. shunt cal 8a;
Signature calibration 53e
Premium Options: 9a, 9b
Accessories: Mating connectors and connector/cable assemblies
LO-15
