Scribd
Upload
57 views52 pages

Anchoring Technology2

Anchoring Technology2

Uploaded by

InMySoul Child life
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
57 views52 pages

Anchoring Technology2

Anchoring Technology2

Uploaded by

InMySoul Child life
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 52
ay Ll Ss DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING |! MUUME T#BLE OF CONTENTS —————— 1.0 NOTATION 3 2.0 PRODUCT SELECTION CRITERIA 4 3.0 LIMIT STATE DESIGN METHODS 5 3.1. ANCHOR DESIGN 3.2. ANCHOR CHECKING 4.0 WORKED EXAMPLES 6 e 4.1 SINGLE ANCHOR UNDER TENSION 6 4.2. SINGLE ANCHOR UNDER SHEAR 6 4.3. SINGLE ANCHOR UNDER COMBINED TENSION AND SHEAR 6 4.4 TWO ANCHORS UNDER TENSION 7 4.5 TWO ANCHORS UNDER SHEAR 4.6 TWO ANCHORS UNDER COMBINED BENDING AND SHEAR, 4.7 TWO ANCHORS UNDER COMBINED TENSION AND SHEAR 8 ® 4.8 FOUR ANCHORS UNDER TENSION 8 4.9 FOUR ANCHORS UNDER TENSION AND SHEAR 3 5.0 SPECIFICATION AND ORDERING GUIDE 1 6.0 PRODUCT DESIGN GUIDES 1 6.1 DYNABOLT PLUS ANCHORS n 6.2 TRUBOLT ANCHORS 13 9 63 DYNASET ANCHORS 19 6.4 SPATEC ANCHORS 23 @ Ramsar Continued DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING MUM 1.9 NoTATION 4, Ss actual spacing of anchors (mmy absolute minimum ancher spacing im minimurn concrete thickness (rm) concrete cube strength (Nim?) bolt diameter im) fixture hole deameter te) aiameter af drilled hole (mm) absolute minimum edge distance im) actual edge distance of anchors tr) anchor tee characteristic ulate tensile ath Pa) anchor steel characteristic yield strength (MPa concrete elinder strength in Capacity reduction factor concrete tension capacity reduction factor concrete shear. recommended as 0.7 for reinforced crete, and 0.6 for plain concrete capacity reduction factor steel tension, recommended as 0.8, ‘capacity eeduction factor steel shear recommended 25 0.7 eifective anchor depth mr Lew nominal efgctive anchor depth imei eifective anchor dest, 20¢ nominal given in TABLE 1 [mm igcave anchor fength tm) reduced ultimate tense capacity kN Ngo Me Xe eX characteristic ultimate tensile capacity aN design tensile force on the anchor kN} increased design tensile iorce on the anchor kN) assembly torque !Naw cembedment dk pth im characteristic ultimate sheat capacity (kN! reduced ultimate shear capacity concrete ky (on the anchor NI increased design shear force on the anchor kN) increment irom effective depth to erd of anchor im sh spacing reduction factor shear concrete strength modification ‘actor she ledge distance reduction factor shear spacing reduction factor tension concrete strength mositicatin factor tension ledge distance recuction ‘actor tension fixture thickness imma ‘nominal fxtre thickness enna @ Romsor Desrah INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING | MMM 3.0 UMIT STATE DESIGN METHODS 34 ANCHOR DESIGN To deermine an depth, gven i pet anctor, design shear force per anchor, concr hor diameter and embecment thickness, design tensile force anchor spacing, and edge distances. Taking account of application requiternents and cenvironenenal factors, select anchor type ine design tensile force N* and design shea force V* on each anchor in the group. Select the critical anchors) inthe group imate anchor diameter irom INDICATIVE COMBINED LOADING graph, Determine hy from TABLE 1, ensuring hy 14 OK 5276414 = 90mm Specify: Ramsee Trobolk M2 @ 90mm Min Embed 4.2. SINGLE ANCHOR UNDER SHEAR A single anchor is subjected 0 a shear load V* = 17.3KN towards an edge which is 125mm away. Te concrete i 25MPa in strength, ard the fixture is Warm thick. Select and check a Tuoli anchor to withstand the load ‘Wal M16 anchor. oV, = 24.9kN Effect af concrete strength = 24.9 + 0.91 2.7K Eiioct of ecge distance 22.7 + 0.67 < VP NG Tai M20 anchor 0, = 36.8KN Erect of concrete strength = 36.8 «0.91 3.3K Etict of edge distance 33.5 + 0.59 = 19.8 D175 OK Bfective depth must exceed 4+ d,= 4-20 Imm to develop tull shear capacity $=80+20= 100mm Specity: Ramet Trubolt M20 @ 100mm Min Embed 15.2kN 4.3. SINGLE ANCHOR UNDER COMBINED TENSION AND SHEAR A single anchor is subjected to combined loading of NS = T2KN, and V" = 6kN directed toware's the ‘edge, The anchor is set into 30MPa concrete 100mm irom the nearest edge, and the fixture is 25mm thick, Select by design a sutable Dynabolt Plus anche, Tension ial MB anchor with effective depth h = 5mm. ON, = 16.44N fect of concrete srength nil. Etfet of edge cistance nil Efiect of concrete strength nil Effect of edge distance nil V*, = 6.0kN ‘Combination Diagram is based upon efective depth of 46mm, Modified N*,= 12.0 + 12.6/16.4 = 9.2kN “Tal cesult pls in interaction diagram as M10, therefore trial M10 anchor. Tension For efective depth h = 851mm, aN, = 20.44 Efiect of concrete strength il Etlect of eoge distance il Shear eV, = T.1kN Efiective depth exceeds 4 « 12mm = 48mm, therefore full shear capacity avalabe. fect of concrete stength nil fact of edge distance nil, V*, = 6.0kN Combination Diagram is based upon elective depth of $Omm. Modified N*, = 12.0 + 18.3 20.4 = B.4kN Tial result pits in interaction diagram as M10, oK s=63+ Specity Ramset Dyncbok Plus M10 @ 73mm Min Embed DESIGN INFORMATION - MEDIUM ANO HEAVY DUTY ANCHORING JME 49° WORKED EXAMPLES 6 ® Ramsoe TWO ANCHORS UNDER TENSION 44 A pair of anchors are spaced 100mm apart, paralie! to-an edge 35mm away, in 40MPa concrete, The anchors cary a total ultimate foad of 27kN in tension, Select and check a suitably sized Internally Threaded Sacker anchor. The anchor ist be fixed wth Epoxy Set ‘Assuming load is evenly shared berween anchors, Ne nN Select 1G iterally Trreaded Socket Epox: Set) as trial eNu = 15.7kN Elect of concrete stength nil, (Capacity is limited by inser steel srength & shoule therefore not be increased due to higher concrete strengths CCheck bolt capacity irom Table 3. 4.6 grade or higher is acceptable for N* of 1TKN. fect of edge stance 15.7 + 0.91 = 14.3KN. Biect of spacing nil, eN,, = 14.3kN > TIkN ak speci Ramet Eooxyset famset Threaded Socket wio Bolts 4.6 grade min 4.5 TWO ANCHORS UNDER SHEAR Two anchors ae cast into @ 30MPa tt panel. The anchors ae 130mm apart, 150mm irom the edge and resist a tol shear of 30KN civeces toward the eee. Select by design a suitably sized Hex ferule to esis the loading. ‘Assume the load is equally shared between the SKN. “ial M12 size anchor. From Table 5, for 88 rade bolt ov, = 28.2kN Elect of concrete strength ni Erect of edge distance 26,2 «0.84 = 23.7kN fect of ierule spacing 23.7 «0.92 = 1B > 13kN OK From Table 6, for MI2 5.8 grade bol, OV, = 18.3 > 15k) seal senath, and thereiore load limited by B grade bolt may be used Speciiy: Ramset Hex Ferule Bolts 5.8 Grade Min M12 @ 65mm Embed 4.6 TWO ANCHORS UNDER COMBINED BENDING AND SHEAR Two anchors are lacated one above the other in te centre of @ 45MPe, 300mm square colums. This gives nao edges at 150mm, The anchors ate spaced 300mm apart and the connection must carry a bending moment of 10kNm, and 2 shear load of 40KN The fixture is 16mm thick. Select by design a suitably sized Spatec Anchor o esi the leads Nt = 10m /'0.3m = 33.3KN Assuming shear is evenly carrie by both anchos, ve Tension From Table i, select W12 at 108mm effective pth astral anchor @NU = 43.2 > 33.3kN Elec: of concrete stenath, X fect of edge distance pet ed, Xy Ect of spacing X, = 0.96 Nt, = 33.3 /(1.13 0.95 + 0.95 «0.96 = 33.4kN 20kN As interaction diagram 3s for Modiied Nt, = 33.4. 340/ Shear fmm, 23 263kN “Eifect of concrete sxength nil Etfect of edge distance nil. Factor ior table 7 ' 0.55. but as load is parallel to edge, this figure 's doubied, but always < 1.0) Etec of spacing rl = 20kN Combination Resell plot on interaction diagram as 412 OK $= 108+ 13 = Zin 50 Ramset Spatec M12 @ 121mm Min Embed vars > MEWIUM AND HEAVY DUTY ANCHORING UME 4.0 WORKED EXAMPLES 4.7 TWO ANCHORS UNDER 4.8 FOUR ANCHORS UNDER € COMBINED TENSION AND. TENSION SHEAR Four anchors at spacing of 150mm and 125mm. are wo anchoes ae rem ftom an edge, located through a 20mm tick see! column hase ico Fee are Tee ete ace 2 AOMPa lb. The (tal Unk on the caluma is ina line parallel o the edge and must together reat 1608N witha zero shear component. Select and 2 total tension of TKN, ela foal shear ol 1BkN, check a suitably sized Spatec anchor to withstand the Select by design a sutably sized Chemset Capsule oad anchor. Assuming the load is equally distsbuted Assuming the loads are distributed equally to between the four anchors both anchors, N¢ = 160/4.=40.0kN, Nt 215/25 7.5KN st M6 Spatee anchor with L, = 131mm 8/2 = kN 131-20 Mim a ON, = S1AKN for = 108 < 111mm OK € Select M10 a5 trial anchor size fect of concrete strength %, = 1.15 Giect of conctetesrength K_ = 0.95, Check egh anchor or the spacing eet oi 0 7 other anchors: Efiect of edge distance and spacing nil 10.95 = 7 SKN, for 130mm soacing and for 175mm spacing ON 2514. 115 «0.73 «0.77 = 332 Biiet of concietesrengt < 48.06 NG {lect of edge distance ri : Cee pace X, 2094 Try M20 anchor with L = 1654 € Vs, =9.0/(0.91 + 0.94) = 10.5kN b= 165-20 = 145mm Combination aN, = BO2KN for h = 140 « 145mm OK Resuk plot on interaction cagram as M2. Check each anchor fo the spacing eect of two thereiore check reduction iacors for edge other anchors sistance and spacing Xa = 0.68 for 150mm spacing and Teesion 71 for 123mm spacing i edge stan Hat ONy = 802 + 1.15 +068 -0.71= 445 Etfect of edge distance and spacing ri. a oerice ¢ Nt 275/095 = 7.9KN : i 40 + 19 = 159mm ni + Specify Giiect of edge divance X,=0.79 ones fect of spacing X, = 05% set Spatec Sener M20 @) 153mm Min Embed Vs\# 90/1097 «0.79 + 0.90) = 13.94% Combination Result plots on interaction diagram as Mi2. OK Specify Ramnset Chemser Capsule Ramset Chem Stud M12 @ TOmm Embed ® Ramsor N+ mevium AND HEAVY DUTY ANCHORING UUM 4.9 WORKED EXAMPLES ® 4.9 FOUR ANCHORS UNDER COMBINED TENSION AND SHEAR Four anchors are located on a 40MPa wall panel ‘ear 10a side edge. The anchoss are set out in a squafe arrai ata spacing of 150mm and located jomm from the edge. The top two anchors are to 8 total tension of KN, The teal shear KN. The Shear loading s directed Sarl tothe euge. Select and check an appropriately sized Chem Injection anchor to resist the applied loads This example can be conservatively solved ifthe ton ‘wo anchors carry no shea’ load. This is ensured by r} slotting the top two fxture holes parallel to the panel edge. Tension Top Anchor Nt 34/25 17kN Select ial anchor size of M16 oN, Eiect of concrete srengtn X= 1.15 Etiect of edge distance and spacing ni oN, = 220+ 15 2253 >17.0KN OK @ ‘Shear Bottom Anchat Vt = 40/2= 204 Wal M16 ov, = 33.368 ect of concrete stengthril fect of anchor spacing X at of edge distance ky (Factor irom Table 71s 0°85 for Mt6 @ 700mm edge distance. This value is doubled as load is parallel edge e ov 337 «093-09 22> 2kN OX. Specify Ramset Chem Injection Ramset Chem Stud 416 @ 125mm Embed DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING I/WE 5.0 SPECIFICATION AND ORDERING GUIDE J ersasorrecus ancrions CHEMICAL ANCHORING SYSTEMS Specfe Tead ize amy @ minut | Onder, DP aw. Spec eredment in Ovmabot he Anchor © D ram — stuns 5: RamseOvnabol Pos Anchor lengths on Tied size mr @ M10 8 Biowm Min Ered 2:08 12 100 28: Rome Chom Std N86 0mm TRUPOLT ANCHORS Spey: Thea siz mn @ ira sockets ‘enero minh head size nm ee Ramet Taso Anchor lng inn) — 7 Ramsat Theadea Socket 88 FSi tin Ea ted ee thcknes |__| *8 Aart Trend Soc | ex: 08 090 DYAASET ANCHORS | Specie Deed vise emmy Orie: SMe, eran ee CCHEMSET CAPSULES resditee ipl 5: Ramet Cheret Capsule eg Ramset Ovnaset amset Cher Stat wi 1B. Bdrm Min Edt ep DE08 “SPATEC ANCHORS Spectr: Tread size mm @ minimum | Orde SA, #88, embenert nm spe T ‘CHEM INIECTION | Thread size mam — (9: Ramset Cham iniection | ce:Ramvetsoaee Anchen” in) —— amset Chern Sut [0 etm ened = Bred «gu tikes 10.8 90mm Embed | eS TCM CONCRETE INSERTS [ | specie Teas sze mm Orders TCM at : | Tea inset — | | eroxyser | head sie im) 25 Ramet Epoey-Set | eg:Romer TOM woe Ramet Tread Sock wie ee [ex renwcices| | specie head size mim @ Onder: eizcment im fe eo EPONY-SET PAST SET [eames Fee Anchoring — |_| Ramet Epon St fa Set jeer [| $80 1500 Embe | ex 29095 Far writen specications, the follwing clause can be kena yi de: read sie) — ‘rch enh) — ig ew: cs08 110 Onder cis (Chem Teac Secke. i Thea se ee ex C15 Orders Cuts Chemie Caos Then size mm) es: CHEM OS nde: sxe Poiyezer cen Order: sxe Inject Seen 1 — bows Se eeu der sa Injection Syst Kit — Ey Set Ft Set “ee conareaion ny logue or curve roded R Anchors toe Kamet(Anchar Narn) MiThread Size! witha minum embednent in concrete af (Design Embedment Dept sid in accordance wih Ramet «rcornmendations. The died holes ar o be (Hole in diameter, and thoroughly cleaned efor insertion of the Snchor- The anchor are tae ightned ta the eecermended assembly tre ® Ramsor { | DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING IMUM 6.1 DYNABOLT® PLUS ANCHORS ® PRODUCT USAGE FEATURES. Meelium duty anchor for structural use Through fastening Progressively collapsible patented sleeve Tesed cyclic performance Variety of head stvles MATERIAL SPECIFICATION CARBON STEEL ‘STAINLESS STEEL BOLT |_ STRENGTH BOLT | _STRENGTA | [i oe eoT ae @ vt | ety | ay 33 [ao | 8 [75 | 690 800 6 | 380 | 600 [3 {500 | 700 3 | 80 | 600 wo] 0 | sa ve | 00 | a 12_| 300 | 500 16 _{ 320 | 400. VARIATIONS AVAILABLE. Hex nut, hex head. countersunk (lt nea, round head, hook/eye, component set. SUITABLE FOR FIXING INTO Solid concrete min, 20 MP2 ‘onditional use in solid brick work, filed hollow Blockiystk, hollow concrete slabs, nd hollow correct Gamer tole te. Clean hole thoroughly with ese anchor trough fare Tighten bolt with torque secommended depth nv brs: Remove and fap) until waste wench 16 recortmencet debes by way of vacua Fonars Hure dssemible torque puna, comressed at anit DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING /UUMEE | MIT STATE CAPACITIES PER ANCHOR - (TENSION) DYNABOLT? PLUS ANCHORS TABLE 1 REDUCED (0, = 06, a, = 0.8 CHARACTERISTIC ULTIMATE TENSILE CAPACITY oN, (kN CARBON STEEL so] nz} ate 56 30 | 80 ia) na [va 2e| 26) 126] 126 Wo) 143 | 943 pelaz| a3 wes ioe eta fw ; : J TABLE 32 ABSOLUTE TABLE 42 ABSOLUTE “LIMITED BY STEEL STRENGTH ‘ON,’ MINIMUM EDCE MINIMUM SPACING + INTERACTION DIAGRAM ‘oN,’ DISTANCE ‘en! fr ANCHOR, 7 TABLE 2 CONCRETE STRENGTH EFFECT - TENSION ‘X,' Size coNCRET Awe | 20] 25 [308 mas i FACTOR [oaz [os Me I mi | 0 a i Cuno SRE [18 | 3 ai TABLE 3_ EDGE DISTANCE EFFECT - TENSION ‘Xe! oF EDGE DISTANCE @ Tr) errs au wwimms [a0] 30] 35 [ 60 | 05 [75 [100 | 125 | 150 [160 % [rool ie | 30 [082/100 | 30a [ss | 1.00 | | 4 Joa 086] 0selosa [1.00], | % 081 [086/091 |og6 ree, * | s alos loa lois “1d | 1066 | 069 [073 fazr | ose [1.00 [rao] 00 a0 | 083 | ose | 0.71 [095 | n99 | +00 037059 | 063 |o.74 046 [097 | 00 1s 200 | 250 1.00 07 035 ox 082 100] 100 075 | 079 }0.29| 099 0.70 |0.7$ 10.82 j090 ® lta pene a ee eee | HIMMUMEE LIMIT STATE CAPACITIES PER ANCHOR - (SHEAR) DYNABOLT® PLUS ANCHORS TABLE 5. REDUCED to, = 0.6) CHARACTERISTIC ULTIMATE CARBON 5 ANCHOR [st85) mess MIO] a2 | Ne CAPACITY “avy DIA SPACING | 75 | 110] 120 | 930 | Teo] 170 fee) | pst | 30 | 75 | 35 400 | 19 [130 | einen) SHEAR ti fise} 202 ov, (8 TABLE 6 CONCR: EFFECT. SHEAR Xe CONCRETE STRENG? 0 30 ical ) FACTOR 032 [oat | 1.00 TABLE 7 EDGED! TABLE 8 SPACING E Dist mss vel M10] Miz] M16 SPACING ps5 r [ove 30 (ess } 5 oss 5/03 [3 [tool oss 3 [ess 35 | 100/071 [035] 037 [oa 0 078] 060] 0.58) 031 7/098 8 093/071} 068 | 01 fast e100 2 1.00] 082 [o7e a7 pass 100 097 [058 [088 | 086 Ose 1.00] 1.0] 090] 0.74 20 1.00 100 {0.93 [091 | 080 1.00) 0.96 30 098] 035 D8 TABLE 7 ASSUMES THAT LOAD IS TOWARDS EDGE. vo | [_}i-00] 3.00098 | IF LOAD PARALLEL TO EDGE, FACTORS ARE DOUBLED BUT ARE ALWAYS's 1.5 ©///MME FORMULAE —_///AIMMMENDICATIVE COMBINED LOADING ° | MUU SPECIFY CALCULATE DYNABOLT? PLUS ANCHORS 8 Ny = ON, He Ke Ny 35 INTERACTION DIAGRAM sry CHECK NF /aNy 51 SESE eee eae CHECK a2 aye 2 eq ‘CALCULATE Vy aye yay 1081 NON, +V"/0¥,, 51.2 CALCULATE TENSION RAMSET DYNABOLT PLUS MA’d,) @ (5mm Min Embed HAMUIME \Wssir STATE CAPACITIES FOR STAINLESS STEEL DYNABOLT? PLUS ANCHORS - STAINLESS STEEL { TABLE Iss REDUCED (a, = 0.6,09= 9.8) CHARACTERISTIC ULTIMATE TENSLE CAPACITY on) TABLE 555 REDUCED (o, = 0.6) CHARACTERISTIC ULTIMATE SHEAR CAPACITY ‘aW, kN eee FECTIVE, OF ma] Mio le? ] Ce aa eae sss [ass | 8 [oe [ie a fa % al eep se SPACING 30} a5 te | be x 20 | 20 | eo = ; 7 "Lael ab Lah | [cease a be eo) 116 | 6 EEE eee 30 ar] us | as |. satae [oe Ds iar py 12 ov ina te "TMITED ay Stef STRENGTH GN, TABLE 7 EDGE DISTANCE EFFEL SHEAR EOE DET] was | we | ne [oto at2 eee ‘aime | foe Bs 5 (snl | so |1.0 [oss 33 fio fort Poss jostp | aes 7 033 | 071 |a6s ast o_|120 | p50 |099 loss nea % Yoo Powe 75787077 105 a7 fost jos joe] @ 109 1.80 / 3.00 | 090 ed 190 | 1.08 Joa3 | ost Bs 100 | 1.6, | awo "lass | 03s Cee Tso DYNABOLT? PLUS ANCHOR SETTING DETAILS © (lor Donene a 1 HOLE OUMETER dy Cs [s-{ 0 |v. |_| EFFECTIVE ANCHOR nH po Poe) 3d unr eB lo |e, a | a |e : 3 86 @ 50 13 6 | mf te I | it | nowna rare 3 3 6 a foe | 3] THORNESS [2 )e@ fe |e |e | } 21S [ek |e ta | & @ | L js | SOGTORE TOM «| | | UB | 8 5 10 of I mapudownGaP | 23 3 a é 7 ; t+ { | ® mmuenom baa ee NQhnas ACTING % | % | | |) oem ee erect eee eee eee | 3% 30 |B | 6 ia ane ‘ | { eee EeOMENT NERNEY iam | A seed |euin eee FEE oe PYRMALIUN - MEDIUM AND HEAVY DUTY ANCHORING UE a TRUBOLT? ANCHOR ® PRODUCT USAGE FEATURES Reliable medium to heavy duty anchar Fall shear capacity Through fixing Suitable ior stand-off ixings MATERIAL SPECIFICATION CARBON STEEL REE] ow, | sec | St “dy fe | WE im | MPa! | Pat | Par | Pat 2 6 | 60 | m0 | v0 [ 30 [a [eae [730 [ 30 | 50 {10 | 80 | eee | see [azn 2 [na | 50 | 330 | a0 ® STAINLESS STE [BOUT] ED | RED | THR] TARY Dia, | sec | SC | sec | sec ye | | te | arm | tba} Pas | eat | Pat | © [70 [330 | 320 | aco | {sae [600 | 20 | 000 | 390 f 70 | z pSse0 | sao [360 | 50 [ow faa | ¥ei] 600 | 380 | 600 ‘ i= SUITABLE FOR FIXING INTO. “td inked —Conditional ase in iilled hollow blocks, solid brick won ree” Dail corec diameter ole 19 Clan le horeughly whinge anchor ough inure Tien bat wth reue secoevence eat tvlon Bish Remove and pinuntl washer wench 1b eeccmmmeried ees oy way ok vacuum URE Hate Seren toeue pump. compressed a Rand ® Ramsar pump ee wee i entaiiwes + meUlUM AND REAVY DUTY ANCHORING J MUR WIT STATE CAPACITIES PER ANCHOR - (TENSION) TRUBOLT® ANCHORS ¢ TABLE! REDU CARBON STEEL (0.6, 0, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY oY, fan) ie |nioni2] are fanaa as | | Vien Ts DOT a] * LIMITED BY STEEL STRE TABLE 2 CONCRETE STRENGTH EFFECT TABLE 22 CONCRETE STRENGTH. - TENSION," CONVERSION iiPal CONCRETE), Par] oS [we ques [20] ]o] la FACTOR [oa2[oa1] 00 CHUNDERSTR Dials © TENSION "X,! TABLE 32 ABSOLUTE MINIMUM. EDGE DISTANCE Imma EDGE DISTANC! 3.20}% 00) 10.91 |0.96 |1.06 | | 2] foasfoss|.00 | 10.731077|0.84{091 100! [063 0.58 }0.74 0.80 )0.29, 95 10539]0.62|0.47 10.72 0.79 1B 035 {038 0462 |0.68 i 1050 |0.54(0.56 0.69, TABLE SPACING EFFECT - TENSION | SGNG oT ope ; Bien [SO [es [75 [oo] [a0 [0 [as 0 [109 2 oasjog7 | 831035) c0|s.0 ar|099) 20 oer |el 0 co 10.65 {0.70/0.73 |o.80/0.88j0.95 22 eee ase oss egefogsla" love |oe 1s ae osea-r2|a76: TABLE 42 ABSDLUTE MINIMUM SPACING "ay (mam ANCHOR | ay} 15. 1n6a|a.6: 067 |0.70 Lous 10.38 0.61 [0.64 0.65 @ Ramser YE Rimariey = MELIUM AND HEAVY DUTY ANCHORING | MMME UMIT STATE CAPACITIES PER ANCHOR - (SHEAR) ® TRUBOLT” ANCHORS TABLES REDUCED {0g = 0.6, CHARACTERISTIC ULTIMATE CARBON STEEL ANCHOR [i | [iO] wiz] 476] MBO] za] oy Ba I | ‘SRCNC oo [5 [5] eek, ‘a [mw \ Dt eDGE DIST | 73 [100] 125] 125] 175 [200 [250 (ines {EAR CAPACITY ‘OV kN} um) Srear [45] 79 /117/136]248]368) 543 M,N) TABLE © CONCRETE STRENGTH EFFECT - SHEAR ” CONCRETE STRENGTH 25 [30% reat ® CIR TABLE 7 EDGE DISTANC! SPACING EFFECT - SHEAR 'Xy" EDGE DIT | ME] MB JoiO] rz] wild] wae yee |] ofa emnm | am I 30 {e2)anolo00 30 |090] 000/000 & —Joz7|oss}o42}o00 & —_|03s}09910%0]000 | 5 __|0.84|0.60}0.46}0.47| 0.00) #5 {0'96|0.3010.92 [0.88 0.00 | 190[071|054[035]030)000 73 __|+00]093]094]0#9|087]000 2 3a casos ose oo nace 105 1190|081/ 03% [034]. [0 38 tos__| _|100)1.00]085|092/083}0851 5 700) 00987 7.00|036] 066 |0.86] 150 033 1100/12) 0003 200 10/1 0/077 o37[03s 350 190 100 TABLE 7 ASSUMES THAT LOAD 15 TOWARDS EDGE. IF LOAD PARALLEL TO EOGE FACTORS ARE DOUBLED BUT ARE ALWAYS 1.0 : THM rormuae §—////AMMMFRIcaTive COMBINED LOADING cau "RUROLT ANCHORS CHECK N*/oN,, <1 nee oP CHECK a2 6,82 em CALCULATE OV = OV, 2X aXe X CHECK V* fov,, 21 CHECK NYPON, + V" Loy S32 CALCULATE schew 0 10 2 30 40 50 SHEAR ‘0 kN) @® Ramsor MU SPECIFY RawSET TRUBOLT 1.) 8 'Simm Min Embed UUM UIMIT STATE CAPACITIES FOR STAINLESS STEEL TRUBOLT® ANCHORS - STAINLESS STEEL TABLE 155 REDUCED [o, = 06.0, CHARACTERISTIC ULTIMATE ON HN) 8) ILE CAPACITY eFREINE pert | | we wie) 20 ial 3a Br % | Vim 13 wl] ml %| * INTERACTION DIAGRAM ‘ON, * UMITED BY STEEL STRENGTH “eN\,, UME SETTING INFORMATION TABLE 55s REDUCED Jo, = 0.6) CHARACTERISTIC UUM ANCHOR Da [xe SPACING ims EDGE DIST een) EAR CAPACITY ‘oV¥," IAN) @ Ramsee TRUBOLT? ANCHOR SETTING DETAILS SOUT Gane ay me] eM a] we | |e HOLE OAMETER oy" spe |ope tle)» | | ECVE NCHOR 2 fe fe2)s )e*]s los lence ty i | e fo | F we fons | 1 a lo | o s | im f 204 7% | 9 138 oo | no ‘NOMINAL FITORE 5 5 3 2 0 THICKNESS *w," 3 | «0 | a8 0 | us 5 los | op nt @ | 6 a0 i | aseaToRDE Tm a | | 3 [OF | 5 | as | 395 | s|_w | % | 4s vas_| Ws TITUREROUE DIA 3 [2 2-3 |» | | | OMNALRECIMEOET a | Bs |» | | os te lol SuB_DUENTINGREMENT vim) 9 | 10 i > | a | = 1% [nina CONCRETE sof sof rey tof no | 30 | 68 [THICKNESS 227A { ® @® Ramsor J MMUME. 6.3 DYNASET? ANCHOR PRODUCT USAGE FEATURES Medium duty anchor Flush finish Suitable far any clamping thickness Usable with any head style Anchor remains set ater bolt xemoved Seeing tol has full st indicator MATERIAL SPECIFICATION CARBON STEEL (Sour STRENGTH | ova, reco] ut iy | ty | | im | iviba} paar 6 | 350 | 0 3 | 350 | a0 10 [0 [ 80 12 [260 [320 ef 30 | 0 SUITABLE FOR FIXING INTO. Solid concrete, min 20MPa, Conditional use in solid brick work, Clean hole thoroughly with 9 avion beast Remove debs by way ct vacuum pump, ‘compressed at hand Dri correct diameter fale to recommender eat Insert anchor, Drive dows ihe plus ‘unt he seting tol Snel meats he incher pump ete VI UWIT ANCHORING HMMM WIMIT STATE CAPACITIES PER ANCHOR - (TENSION) DYNASET® ANCHORS 8) CHARACTERISTIC LiTIMATE TENSILE CAPACITY ONY, KN) ANCHOR SIZE 8 [To [Miz | wt6 | m0 : 109 | 166) 20 4 126 | 192 | 266 141 | a1 | 333] Bs 0 134 [235/325] t u 159/242 | 336 0 v8 ai | 76 TABLE 2. REDUCED (e,=0.8) BOLT CAPACITIES of, TABLE 2a, CONCRETE STRENGTH kN) TENSION CONVERSION (MPa BOLT GRADE BOLT SIZE [cuseste # [20 [30 [0 Ts [o0/ [me [on [a [oe [no [ounoee ste ey is (oe [3 f2| a] ae [39 {70 [ma [rex [301 [azo 53 | [iz [tae | 270) 302 | zea 88 03 | 187 | 29.7 | 43.2 | 6041125. TABLE 3. EDGE DISTANCE “TENSION "X TABLE 3a A8SOLUTE MINIMUM, ANCHOR EDGE DISTANCE ‘e’ (mm) EDGE DISTANCE ’éq (mimi Size ‘ANCHOR a 95_[t00 [135 | 17 285 SIZE we (190 we | 35 we |0a0 [100 an 00 | 140 wa [100 v2 oxo ro) | wi 5 Me 0003.00} | wiz | We is ae [wa [| wie | 30 ao | 285 TABLE SPACING EFFECT -TENSION 9 ANCHOR OREN | size : i, To [ioe [a5 [165 [705] TABLE 4a ABSOLUTE MINIMUM, Mo 100 i SPACING ‘a, (mi Me (000 1.00 | ito 200 |100| | MF 0.00 | 1.00 wae Oi | a0 id [i | 00 ® Ramsor MUM LIMIT STATE CAPACITIES PER ANCHOR - (TENSION) SPATEC™ ANCHORS € TABLET REDUCED (o, = 0.6. 0, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY oN, {kN} CARSON sree i { efective 1 | PbsIn Pana | nz Jans J woo ) oes i | = ae |B PT so | Ff 8 ahr ¥ : : ca ris | nx | oar 90.4" deel he 185 29 TABLE 3a ABSOLUTE == TABLE 4a ABSOLLITE 133 [raat MINIMUM EOE" MINIMUM SPACING Diwbeed [97 [2] wa |B we eee eee Santee | ANCHOR | ey vinm [2] 3] 6 [| ou wie [=] [wo] “INTERACTION OIAGRAN an wi wie | 90 TABLE2 CONCRETE STRENGTH EFFECT - TENSION Xe" wie | sae |S cation] Os La to [a] [se wad | ractor | 082 | os | 1.03 [1.15 [129 | 11 cad Mis 6 TABLE 2a CONCRETE STRENGTH CONVERSION (MPal [ovae ie g »iulols |e Cnunper sme | 5 3 Le) TAALE 3 EDGE DISTANCE EFFECT - TENSION ‘, ee EDGE DISTANCE ‘© oer Rew [75 [ioe [78 [50 [75 | 200 | 0 | 00 7% | o76 fost | 100 a | 07 | O34 | 098 s__| 030 {083 | 095 | 100 : vas [oz Fors | oa: | 035 | 190 | be 868 | 077 | 086 | ose | 100 10 or | ono | bas | 057 147 \ 078 | 086 | 0.93 | 100 185 068 | 34 | 030 | 093 L195 072 10.78 | 090 | 1.00 TABLE 4 SPACING EFFECT TENSION x. oF SPACING te oan ee em [75] 0 75 | a0 ase aon [sca [io [76 [ase Jor axe | 036 | 1.00 | | 86 0.65 | 069 0.84 | 0.49 | 098 | 1.00 | | | oo | oes oe | as | oar | ico || © ce | ove | ous 081 | o8e | 096 | 100 i 083 10 {ue ue wr 095 185 0.86 | 3a ® Romeo ceiem ANY MEAVT DUTT ANCHORING /MUUME MIT STATE CAPACITIES PER ANCHOR - (SHEAR) 6 SPATEC™ ANCHORS TABLE 3 REDUCED = 0.6) CHARACTERISTIC ULTIMATE SHEAR CAPACITY’ ‘BY, 1kMI CARBON STEEL [Saxe ys] sr | Fe x0 | #0 F Anchor wo] Ma wig | 820 | m2] i on j tock ost | 300 | Bo ene sate [a9 | a anyunn | 0 0] Fo TABLE 6 CONCRETE STRENGTH EFFECT. SHEAR 4 CONTE |S ae tir (Teron om [oa i {TABLET EDGE DISTANCE EFECT-SHEAR 4 TABLE SPACING EFECT SHEAR EDGE DIST ‘ao | one wié | 20 | Mas SPACING an wie [a0 | om Ieee OF | ca 09 | 8B | coe oa 83 | 886 [882 | oxo 0.29 ‘ass | cas | 080 | 0.00 o8 ac | cae | 033 | 38 oS tie | Sse | 03 | bss 7 Gee Pom | a a 136 | 03 | 98 oa | at | O34 1 | No 130 | 200 | TABLE 7 ASSUMES THAT LOAD iS TOWARDS EDGE. IF LOAD PARALLEL TO EDGE FACTORS ARE 7 i DOUBLED BUT a: 9 // MME FORMULAE @ Ramsot CALCULATE Ny CHECK N*/oN,, £1 CHECK a2 ane 2 eq CALCULATE 2 Vy = OV, “Ke -K CHECK V*/0V,, CHECK NToNy + V8 /0Vy $1.2 CALCULATE sehey ALWAYS S10 | H/PUAREROICATIVE COMBINED LOADING SPATEC™ ANCHORS INTERACTION DIAGRAM SHEAR ‘0M (kN DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING /IMUMEE SPECIFY avoiserseavec ¢ Sad) 8 SI Mir Embed J UUMEE SETTING INFORMATION SPATEC™ ANCHOR SETTING DETAILS. (RouDiawerer g, Tt wig ws] HOU DIAMETER “ay | I |“s4 7 wi jos 1 180 16 NOMINAL FIXTURE, 20 3 | 33 THICKNESS "wy 0 3 0 50 | RECOMMENDED asiEaer 5 a TORQUE T,’ (Nmb ‘MAXIMUM PLLLOGWA CAP 7 «| ! [/ARTURE CLEARANCE HOLE 7 7 [OIAWeTER 6) 205 2s I 74 % | a | £08 ‘NIU CONCRETE 10 140 i THICRNESS "by 2" ht 180 20 Fo AiEDMNTRGEMET mm) @® Ramser e DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING LAMUMEE 6.5 CAST-IN ANCHORS ® Romser 6.5.1 TCM CONCRETE INSERTS PRODUCT USAGE FEATURES Heavy duty castin anchor Can be used without ross bar Flush fish Insened into plastic concrete With crossbar is suitable for seismic loading MATERIAL SPECIFICATION CARBON STEEL STAINLESS ST Tar a ow Pup] es | mee | wan | oa | obo | [6 | 30 | | [a Pa0 Dae | io | 30 | so cap 330 [30 1 Lan [a0 [330 [30 | [oo Tan) [ae [so [re SUITABLE FOR FIXING INTO Pre-cast and in-situ concrete, Drit hele in formar Pass Aer concrete se. remove the bt Butoh the ce the bot ant form work ie the Concrete Inset and ——_‘Iniving the Concrete insert. Tighten fe theese tothe my ante UMMM \IMIT STATE CAPACITIES PER ANCHOR - (TENSION) TCM CONCRETE INSERTS € TABLE 1 REDUCED (0, = 0.6, 0, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY oN, (kN) CARBON STEEL [ RENEORGING [CONCRETE] 6 | we] tO [M2 [ib] M20] wes 4 case | sre Wa EEE eee wus | 5 | aa| oo] 62 | 89 fist) iri | wo UN. 2 |51| 70) 72 }103|a73| 197} 452 sansonceo | 25 | 57 | ra} 0 fat3 Ja95| 221517 | 30 | 62 | 6] 8a {126 | 214] 242| 356 | . res | ts | NA | 78 {2 |ie9[21a| 508 % 2 | mo.ema | 90 }123|218| 247 | 57 INFoR 25 porcross | 100 | 1a | 24.4] 27. | 647 - [30 [foamed | 11.0 {158 | 268] 303 | 703 : i ROSERD. NAT NA) 8 | Re [viz] 2] VID CROSS BAR ec LENGTH | WA | Nin] 300 | 300 | 300 | 300 | 300 * CORRECTLY SIZED BAR MUST BE INSERTED THROUGH INSERT TO OBTAIN THESE LOADS TABLE 3a ABSOLUTE TABLE 2 REDUCED (o,=0.8) BOLT CAPACITIES @N, tkN) TENSION MINIMUM EDGE FOU GRDE IOUS DISTANCE fen: fm ‘6 | me [no] 2 [one | wat wae wee | te ws 39] 70] 1.1] 162 [301] a70] ore 7 3 4 | 13 | tes) 270 302 | ag 39 has TE as 103 | 189] 295) 432 | ana fsa| tao Me] mao} 0 TABLE 2a CONCRETE STRENGTH CONVERSION (MPa) igs € came Teo ea Ta ieee es CunpRsRee ||| Be] 2 [a sanral TABLE 3 EDGE DISTANCE EFFECT - TENSION 'Xy! Med | wa] EDCEOSTANCE nd Sue TABLE 4a ABSOLUTE {20 | 25 [30 | 35 [45 [60 | 75 | 100 [125 | 150 MINIMUM SPACING me P07" [aT [O91 | 1.00 ‘aq! (mm) te | 800/05 [9% [| x00 mae a) € aid 600 | 0.78 |a86 | 1.00, size M2 oooforsyos7| ioc) 4 Met wis 0.00 |0.70| 083 | og7 +90 w20 6.00 }0.78 021 | 1.00, ma | Me Bat | es | 096 | ase | 1.00 mo] Mi | 5 TABLE + SPACING EFFECT - TENSION "%,’ ie | SACHOR SPACING 9 nm) M20 | wo [40 [30] 75 [100] 125] 150 | 200] 250730] = L_we | 75 ja72 [079 | 086 | 1.00 0881033} 073 }0.94| 1.00 0730273 081 073 ]oss [09s [100 074] 082 [990 | 088 | 1 00 0.75] 087 [993 | 1.00 € a7 |o75|083 | ogy |1.00 a nm - mevium AND HEAVY DUTY ANCHORING UME \'NIT STATE CAPACITIES PER ANCHOR - (SHEAR) WUE FORMULAE CALCULATE ON y= ON Ye Ky ay @ Ramsor TCM CONCRETE INSERTS TABLE 5. REDUCED (oy = 0.6} CHARACTERISTIC ULTIMATE SHEAR CAPACITY* “VN CARBON STEEL i“ aout OWA | née | we fora oda spacing | 00 | 95 [125] 150] 3 meas [|] ®ve p lm im) car [3a] 70] 60 163] 30a]@29/902 ayn) | * BASED UPON 8.8 GRADE BOLTS: TABLE REDUCED (o,=0.71 BOLT CAPACITIES ov, BOIT GRADE BOUT SE M6 | ma [ato] Miz} mie] ano Ans [ae 135 [sa [tor] ies)oratszs [ens 33 73 )i29| 83) 343/332 a8 | rafiz7|201)293|545|@51) TABLE 8. EDGE DISTANCE EFFECT - SHEAR TABLE 9 SPACING EFFECT «SHEAR % [EOCEDIT Wi [m8 Jontoy ata] sng] nz | wae PRONG “psh pa ea Rae IS 0.32) 0.26) 0.77 | 0.75 | 0.73] 0.64/0.61/ 0.36] 0.22 0.88] 0.841077)078) 076! 1,201.00] 083} 038/0.0| .3]0.17 asa) 035|033|0a0|a77|ar3 x0 .00{ 081 /0354047/0.26 tay ]1.00)1co/o32/035/agalasolaze 135 1 90)930}052)036 15 6009086043108 a | 36|072) 0.47 150 32/87/40 175 1.00) 2.86) 0.53 15 096)asa]oa2 200 1100]0.64 20 vo0}053/024 ms | or 25 [EM oszlos 250 i Jost 20 1 o0j088 300, 4.00, 300 | 0.93 7 7 a 00 | 100 “ABLE 9 ASSUMES THAT LOAD I§ TOWARDS EDGE. F LOAD PARALLEL TO EDGE. FACTORS ARE DOUBLED BUT ARE ALWAYS S18 //MMUMEIDICATIVE COMBINED LOADING CHECK N*/oN, £1 CHECK a2 ay €2 ey CALCULAT OY, he eX oY, CHECK V*/e\y. <7 CHECK NT ONy #V" (eV, $1.2 TCM INSERTS - REINFORCED. INTERACTION DIAGRAM Bae 4060 80 100 120 140 SHEAR ‘oN! kN) MANY meakT UUIY ANCHOMNG |MUME SPECIFY RAMSET TCM Concrete Insert Mad Bolt Grade /MMUME | Wit STATE CAPACITIES FOR STAINLESS STEEL TCM CONCRETE INSERTS - STAINLESS STEEL $EOLICED 10,208) BOLT CAPACITIES ON (kN) TENSION BOLT SE me | ma [mio] wiz [M16 | mao] oa24 woours3ie | 96 | 17.4) 276] 40. [747 [1106 |1680) TAGLE 655 REDUCED fn,=0.7) BOLT CAPACITIES oV, (kN) SHEAR [Boi Grane ‘BOLT SIZE | Mo | ma | Mio] M2 | Mr6 | M20 | M24 [asussie [ei Pina] rsh 288] 77 [4 ford JAUME SETTING INFORMATION TCM CONCRETE INSERTS SETTING DETAILS SOUT DaNETER g Te [ms [mio [we [me [amo | me EFFECTIVE DEPTH 'ny” wo | 2s | wa | a0 {sa | 1005 ASSEMBLY TORRE TNR f 4 |e fe [we | wm | a ‘MINIMUM CONCRETE y | THICKNESS by 125 “hy xo} a |. | so | mo | os | wo | ‘CROSS-BAR DIAMETER Toa NA ar a so | 150 | 150 | ROSS Ba NCI [ox [ona | | s00 | 300) | 300 @ Ramzor HUME 65 a fae WANU NGAVT DUTY ANCHORING 6 6.5.2 HEX FERRULES PRODUCT USAGE FEATURES Heavy duty cast-in anchor Flush Supoor chairs avaitable Iceal for recasting Must be used with Coss-bar MATERIAL SPECIFICATION CARBON STEEL ) a] sour | sta pa, [WHO] UF ee |e ce | aba | Pa 2 | m0 | 40 16 [30 | 0 [a [aie [0 [ABLE FOR FIXING INTO. and in-situ concrete Pace to bar though cross hole inset Feri in suggar chai Proce suppor chat easing es, The reinoccemers ® Ramser aetna See DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING HMMM VMIT STATE CAPACITIES PER ANCHOR - (TENSION) ® Ramsor HEX FERRULES TABLE 1 REDUCED (a, = D6, ©, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY* aN, (kN) CARBON STEEL CONCRETE] wid ibe | wieds | was | MOE STR vi fre ee 5B mo [3 352 2 266 | 407 ar 5 as7 | 455 453 Ey ae #98 Fm is Da} % BOUT GRAGE SOUS wa] wis [a0 i Te2] 301) 3 yo | #02 | 7a Las na | joa | rasa TABLE 2a, CONCRETE STRENGTH CONVERSION (MPa) CUBESTR 0 0] UND TRE is [3 apapa TABLE 3 EDGE DISTANCE EFFECT - TENSION '% * ¥12 CROSS BAR 300MM LONG MUST BE INSERTED THROUGR FERRULE 1O OBTAIN THESE LOADS TABLE 2 REDUCED (9.20.8) BOLT CAPACITIES aN feN) TENSION TABLE 3a ABSOLUTE MINIMUM sie was amo075 M636 30x75 20x96 SPACING '3 (mm) 35 5 [Le FERRULE WEORNE etm id EDGE DISTANCE ‘e5y mm) z s]s 7 3 ANCHOR | ey sae [3073s @ oo [as rea wines 0.00063 |o72 [086] 1.00 ; MI6x75 0.00 | 0.54 | 0.76 | 0.87 | 1.00 bis 3 OBOE 0.00 | 0.56 | 0.65 | 0.73 } 0.88 | 1.00 wie |S M2005 2.08 )976 (0.87 [1.00 M2089 90 | 0.55 } 0.73 } 0.8 | 00 [0 | TABLES SPACING FFFECT- TENSION 7%," Taste da assouuTe inne @ DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING [WAMU MT STATE CAPACITIES PER ANCHOR - (SHEAR) e HEX FERRULES. TABLE 5 REOUCED fo, = 061 CHARACTERISTIC ULTIMATE SHEAR CAPACITY® ‘ok CARBON STEEL ANCHOR DIA | Mia t on SPACING, 150 nan. vom | —_ 7 wees | o SHEAR v6 evi “BASED UPON 8.8 GRADE BOLTS ‘TABLE 6 REDUCED (@,=0.7) BOUT CAP! {kN} SHEAR. [Bm CRaDE forsee ff SEE wna Tm] TABLE 7 CONCRETE STRENGTH EFFECT - SHEAR TF ae as CONCRETE STRENGTH (way | 20] [3 | | Ga 13) oa | 533 FACTOR [ps [a3i [00 | a3 83 ss | eee ee eee TABLE 8 EDGE DISTANCE EFFECT - SHEAR "X, TABLE 9 SPACING EFFECT - SHEAR "X," fEOCEOST m2 MI M20 SPACING ] M2 M6 ] wae erm | nm 3 ! x0 oar | a7 | our 75 0.86, 78 as} 026 100 00 | os: | 07 | 3 135 aa | cas | 080 ay 150 100_| 0a _|_oa2_| 7 | 0s ast |” ae os) be \ as: | 086 bs 100 | 07 asr_ | a9 e | Toa | 20 | | 400 300 | 1.00 300 TABLE & ASSUMES THAT LQAO JS TOWARDS EDGE 350 ! TF LOAD PARALLEL TO EDGE, FACTORS ARE DOU! BUT ARE ALWAYS < 10 UME FORMULAE J/INMERovcame COMBINED LOADING @ Ramser CALCULATE HEX FERRULES: a Ng = ONY oh Ne INTERACTION DIAGRAM CHECK N*/oN, £1 CHECK a2 2,02 tq CALCULATE 2 Nay = Vy Ke Ke Ks creck vel et CHECK Ni oN + V*/oV 912 © 2 ao “60 ad" 100 SHEAR ‘0V,! (kN DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING UME SPECIFY RAMSET HEX FERRULE é Md) @ (5mm Min Embed Bolt Grade /IMUUEE SETTING INFORMATION HEX FERRULES SETTING DETAILS. [Rorroeren a, mies | wos | wt (ienepernn ui iH LLG | Assewaiy TORQUE T: INE ce) 73 ‘NINO CONCRETE 70 1 0 THICKNESS "by o 125 Ver BAR DIAMETER, me viz, YR CROSS-BAR LENGTH 300 300 | 300 @ Ramsor DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING MMAR 0.6 CHEMSET? SPIN CAPSULES e PRODUCT USAGE FEATURES Reliable heavy duty anchoring system: Suress-iree system with small spacing and edge Gistances Fast curing styrene free resin systern Suitable for cored holes ‘Can be installed and used uncier wate Resisant to most organic chemicals, and mild alkalis and acids Spin or hammerin types MATERIAL SPECIFICATION ® CARBON 5 STAINLESS STEEL BOUT | [aoc [_sirencin_| ow. [we ar) | ow [veo [ur Phew le | pa foe pe cron | > | bon] | cm | a | at Le aot ra 708 i@_| 30 ie 700 2 - 30 2 | 700 @ 16 | 80 16 [20 zo [+0 15 20 | «30 | 700 fe Pao [so] [ae Taso Tito SUITABLE FOR FIXING INTO Solid concrete = Conditional use in solid brick wok, filled hollow blockwork, Onli covet ameter Cleo sides and side nse capsule Showy Santana ewnng ole orecommendeti hole throuphiy sth rounded enc out. Stas te sel Sat sth torque depts Sl bash Remove is ay oF acm vende @ Ramser conned Hs tormse DESIGN INFURMALION - MEDIUM AND HEAVY DUTT ANCHORING IMUM \WIT STATE CAPACITIES PER ANCHOR - (TENSION) CHEMSET® SPIN CAPSULE ANCHORS € TABLE | REDUCED (0, = 0.5, 6, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY ON, ik) x PE" yoeecudy saeees []™] OC eho? 6 * NOMINAL EMBEDMENTS. * USE CHEM2024 + CHEMB CAPSULES FOR INCREASED EMBEDMENT DEPTHS TABLE 2. CONCRETE STRENGTH EFFECT - TENSION [Goncee tora [0 [3s [ay] 2 0 FACTOR 049 | 095] 1.00 | 102 | 1.09 TABLE 2a CONCRETE STRENGTH CONVERSION (MPa), TABLE 3a ASSOLUTE € casey | »[s] 01%] 0 ed LUBE STR x t sos DISTANCE ‘e,, (mmb cunoamme [slulsleals SCHOTT ‘i TABLE 3. EDGE DISTANCE EFFECT - TENSION we [34 ANCHOR EDGE DISTANCE © imi mio | 30 sie - 35 [90 [35 | 0 | 50 | oo | 51 | [100 ia i - “4 wie we eas] 096.00 1, wie | 855/835] 05 | 1c) | | ate] @ wid 00 | oat | 089 [1% | casccetl eae o SEE EeEEEeP et M6 ‘00 [08s joe [180 | wo O90 8s 296 |r| | iM [a00) 085 | 038 oss 00 esate ANIMUM SPACING ae mm TABLE 4 SPACING EFFECT. i | ANCHOR Gm’ 1 [ance | | sze |" | set 2 se va {07 [oar | | amo |eoo| 075 owe a0 | i | i i ton ® Ramsor 36 6 DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING [HHMI OMIT STATE CAPACITIES PER ANCHOR - (SHEAR) * ME FORMULAE @ Ramsar CHEMSET? SPIN CAPSULE ANCHORS TABLE 5. REDUCED (a, = 0.61 CHARACTERISTIC ULTIMATE SHEAR CAPACITY ‘ov,’ NI CARB ANCHOR IA te wie lL Bae | 00 “octost 5 [io sea [ra [ne ov, aN FOR oz fo | 1.00 TABLE? EDGE DISTAN ui TABLE SPACING EFFECT - SHEAR xy” eoce pst | ss [io] m2) mig) a0] Me SPAEING [“e Jue waa] 16] so | wot 2 fos] | | | Bes os | 0 \ 20 [067 | 068 | nes 50 | Yoro| ort |az [are a a7] 933 | 073 |073 ) 0.60 5 13024 | 017 0.78 | 0761376 | 082 ord 109 938/027 700 [045 |o42|020] 086073 [a= | 135 352/038 125 J093| 088/085 | 069 | 077 [aan 150 Das 06 150__|¥00/09#1090 | 093 | oa0 |oas 200 0.88 | 063 1.60] 985 | 096 083 | os 30 10/981 0} | 938 | 088 300 100. | 092) 993 | 190 1.00 TO BDGE FACTORS ARE DOUBLED BUT ARE ALWAYS <1.0 CALCULATE CHECK N*/oN,, $1 CHECK a2 a,e2 en, CALCULATE Oy = Vs ae CHECK ¥* /ol, § CHECK Ni/oNy+¥"(0Vy S12 caccutate KN TENSION "v J MAMBERDICATIVE COMBINED LOADING CHEMSET® SPIN CAPSULES INTERACTION DIAG 40 SHEAR ‘0, KN} UUM SPECIFY RAMSET CHEMSET CAPSULE RAMSET CHEM STUD. Md) @ Fs"imm Min Embed | MMMM \IIT STATE CAPACITIES FOR STAINLESS STEEL CHEMSET® SPIN CAPSULES ANCHORS - STAINLESS STEEL TABLE 155 REDUCED 0, = 06, 0, = 08) (CHARACTERISTIC ULTIMATE TENSILE CAPACITY ON, &N) EMBED. CHING STUD SES OerTH (cin [WET ATo[ aa [le] a0 [moe ne" 6 nx nae sa 02" sar" * NOMINAL EMBEDMENTS * USE CHEM2024 + CHEMB CAPSULES FOR INCREASED EMBEDMENT DEPTHS: TABLE 2 CONCRETE STRENGTH EFFECT - TENSION *X," CONCRETE Pal | 20] 25] 30] 3] we HCTOR 088 [03s] 1.00 [102) 108 AMM SETING INFORMATION CHEMSET? SPIN CAPSULES ANCHOR SETTING DETAILS BOUT DETR ve mid] mia] mie | HOLE DIAMETER“ 0 12 14 7% | RECT ANCHOR Spas) as] ee a een @ | | ‘NOMINAL FIXTURE 13 25 0 Ey) 0 cE Tecate 3 Psu tore am a] a | Bp eS Se Sf to 3S 3 o | jam | FIXTUREHOLE DIA. i 1 3 B Cn ee ee [NOMINAL EFFECTIVE 80 30 10 135, | 150 160 THICKNESS by = 1.25 * hg H | ®@ Remsor LESIGN INCUKMATION - MEDIUM AND HEAVY DUTY ANCHORING UME 6.7 CHEMSET? INJECTION ANCHORS PRODUCT USAGE FEATURES Economical heavy duty ancharing system fp WV Strexsitee sster with smal spacing and edge digances a Fax cing paves esn Can be used in damp, clean holes Resa’ o mosaic cherie’, an ld aa } and acids: Reliable cispensing and mining ss MATERIAL SPECIFICATION e (CARBON STEEL STAINLESS STEEL [oor sec | [oO | skint oa was | ur | | ow [Wao | or a) |e cnn | ob | oti] Limm | t| ot GH ¢ ao [so] (Le [so | 7 wee (se) [a0 [a0 700 Lo bs] [lef a5 | 7 ® ve) so | 50 700 | ee [50 2 1 ao | so] SUITABLE FOR FIXING INTO Solid concrete. Conditional use in solid brick work, filled hollow blockwork. hollow concrete stabs, and hollow @ masonty units Clean sides and inside FL 1a 1/2 of Rote, Siowly inert stad Aer curing tgheen Ori cone: diame hole recommended ot vole naraushy with Keep np ol nozzle shit watiog © boll wih ome deh Srvlon brish Remove the sfesve had wench bs ny way of vac recommended @ Ramser’ pump, competed seer ore hand pun perenne 7 } DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING //MMUME WNIT STATE CAPACITIES PER ANCHOR - (TENSION) CHEMSET? INJECTION ANCHORS. € TABLE 1 REDUCED fo, = 0.6, 0, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY aN, IkNI CARBON ST [ ewee. IRCING BARS | Der ‘insis ima [9a [od a [a ato 2] 6 | ¥20 [28 [whe ” os 10 hsor vat reaps I rea }937 | asl 6 \ 25641562 | 808 * NOMINAL EMBEDMENTS " UMITED BY STEEL CAPACITY (ee note & ifebap TABLE 2 CONCRETE STRENGTH EFFECT - TENSION °X,’ # nib, rebar steel capacity sae st taken as A, + he. ro FACTOR os |o9t/ 1.00 |3.13| 1.22) 29 See sre € UTS=a00MPe 2,-0.6 appiie. TABLE 28 CONCRETE STRENGTH CONVERSION (MPa) TABLE 3a ABSOLUTE MINIMUM cusesia 8 [20 [30 [20 [30 | 00 eect a counoersm- Lis fae 13 2 [i } EDGE DISTAL @ 30 [5 | #0 [50 fags [oss .00 sto oao|oss fas fool || widara | fo00|o3i(oeo|i00) || | m6 ayI6 | }o.c0fo.8s /0.95]1.00 | tend Yo 200 [033038 |.00 Luasaves |] |] J esdjoesjcan|996|2.00) cae ag aasOLUTE MINIMUM SPACING) TABLE SPACING EFFECT - TENSION Ky facie | =] ANCHOR SPACING ‘a’ (meni Se r zt [0 [eo [7 z MB j0.86 | 1.00 an wo 78032 go oH Mine yts fo. |o-8s lose [1.00 = mea vib looc{o7e(oar[oas|ic0] “ hos 23 Ge acs os os} .00 meray | | | [loan faslaas|oss 1.00 75 ®@ Rameor 2 DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING MUM \ IT STATE CAPACITIES PER ANCHOR - (SHEAR) ® CHEMSET? INJECTION ANCHORS TABLE § REDUCED fo, = 0.6) CHARACTERISTIC ULTIMATE SHEAR CAPACITY “9¥,’ KN) CARSON STEEL ANCHOR | us [ro [ner2| sar] 0020 [za | oa SpaciNG|150}75 | 200) 200 [5 [325 EDae DST | 75 [10] 125] 200] 25 500 cin a ae ov, aN TABLE CONCRETE STRENGTH EFFECT - SHEAR X. [concrere strenare [20 [2s [306 Ziad bag|0 [100 ‘TABLET EDGE DISTANCE CSHEAR Ye TABLE 8. SPACING EFFECT - SHEAR 'X,” COCEDST | wa |] M0] M24 SPACING | 8 [otto] aia] we] 2 000 s loool 30 0:19] 00 ia 086 0 030) 022} 000] 6 (0.89 063 |.00 os2)asr|ore 000] 5 }035]0-11/023 0.17]000 «© 07410571033 |0.24[0.17 35 | [to0[o7a[0as[0.[o27| 199 foes (0szjeao/aae|o. 1.09/038)032|038 125 {o35|ose\o35|oas for [Mfo7i joss oas 130 [i c0los|oao|os: 1.00) 0.89) 063 vs 000.9509 | 100/981 300 50} .00 1.00 230 2 BS 1.00{1.00 TABLE 7 ASSUMES LOAD IS TOWARDS EDGE. IF LOAD IS PARALLEL TO EDGE, FACTORS ARE DOUBLED BUT ALWAYS < 1.0 ° MIE FORMULAE —///AAMMBRoichtive COMBINED LOADING @ Ramsor catcutare CCHEMSET® INJECTION sySTEM SNE ON, the Hu My cack N08, $1 CHECK azane%eq caLcutaTe VY, Ke ae Ka vey S1 NYVON, HVE EVy S12 CALCULATE TENSION ‘aN. kN) 20 49 60 80 SHEAR ivy kN DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING MIME SPECIFY aasiset crew ection € ROSE cre STUD Med ‘imm Min Embed JOU MIT STATE CAPACITIES FOR STAINLESS STEEL CHEMSET® INJECTION ANCHORS - STAINLESS STEEL 4s REDUCED fo, = 0.4, 0, = 08) CHARACTERISTIC ULTIMATE TENSILE CAPACITY oN, (kN) 1 [To] Ag] ig] MeO] Ma «(Te jee ® | no 35 150 4 160 | sheos" 170 seal 20 49.2]533 250 es AT NOMINAL DEPTH “hy” e TABLE 2 CONCRETE STRENGTH EFFECT - TENSION “x, CONCRETE WP) _| 20 [35 | 30] 40] 45 | 50] [factor [osz)oay [r.o0)i.13|i2a)nas[ta IMUM SETIING INFORMATION 7 ‘CHEMSET® INJECTION ANCHORS SETTING DETAILS BOU DAMETER ey a HOLE DIAMETER “oy 1% farce eerie te EHE EFFECTIVE ANCHOR 5 nS, 140 1s | 20 265 UENGTH “ty NOMINAL FOCTURE | | THICKNESS ny | x ASSEMBLY TORQUE; NTI | 10 20 #® 3% | ns | 1 x 3% ° | EXTURE HOLE DA n B 5 3 | NOMINAL EFFEC 0 sof ae 35 DEPTH hy ‘MINIMUM CONCRETE i009 ~~ | ow | te THICKNESS *b,, = 1.25 * hy I { | REBAR ¥t2{ 16 |¥20] ¥24 HOLD ANE [16] 20] 36 [3 FOR aa @ Ramser DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING - 6.8 EPOXY-SET ANCHORS PRODUCT USAGE FEATURES Reawy cuty anchoring system Stresiee system with small spacing and edge sivances High chemical vessiance MATERIAL SPECIFICATION CARBON SEL STAINLESS STEEL = aa green] [eon smn | ie bin. [wes pa, PWD] ur ‘dy ‘ ‘oy iy ‘y ino [ nba | wb] [mm | wo [vy @ a) aot sa| [8 | 0 | 70 wt so [5 io | 0 | 700 1 | 30 2 [sso eto ts} [i | ca (ae zo [so | 79 | we = tao [| e SUITABLE FOR FIXING INTO & Sold concrete Conditional use in solid brick work, filled haliow slockwork, hallow concrete slabs, and hollow masonry units Drifcovetidammer Chan ees andinide Fil y3 10 72 awl. Slowly mend aerconng eaten foie Uiccomenes sitelethocumtnth Keepeparractcin” whit hwinagna—— baetn ote eon dion bask ferme te ePenne wi, Srctie dks by wav nen ‘sonmersed @ Ramsor sory comprested i ‘seme Foon pump IMUM MIT STATE CAPACITIES PER ANCHOR - (TENSION) EPOXY-SET ANCHORS TABLE1 REDUCED (@, = 0.6, a, = 0.6) CHARACTERISTIC ULTIMATE TENSILE CAPACITY ON, (kN} Chtéow st : CRGTTOME ENGRE RE] age BIS S ADOT wa a | TE [6 | V0 [] a. mi eos jose] 30.6 [485 pa.4| 793 oa ee.e]as 7 ras [6 as ces) ea es | ier onne BL fas | Do Not Exceed aia feral 79.1 fi13.1 | | Sea nes i * NOMINAL EMBEOMENTS UMITED BY STEEL CAPACITY (See nove # if rebar, or Table 2a for Chemset studs) ~ # nb. rebar ste! capacity {RONAN 4 TABLE 2 CONCRETE STRENGTH EFFECT - TENSION %y" taken as A, { (i210 concrete -iwra —_| 20 [25 130 [ 407 45 | 50 | 60 oF applied to Facer Joazfo-sr|.c0|1.15[122[129[-41 0,04 applied 2a CONCRETE STRENGTH CONVERSION (MPa TABLE 33 ABSOLUTE MINIMUM cuss | 19 140] 50 [0 DISTANCE ‘ey mim) [enunoeesray [5 [2 [33 [ae TABLE 3 EOGE DISTANCE EFFECT - TENSION | ANCHOR EDGE DISTANCE wz [Bele a] [a] 8 [085 [0.96 7-00 | mio [000 |0.83|0.3¢|1.00] | | 2.88 1.00 30] 50 [108 watt Pagers | loonjoss[oaeliof | woo ey te [ts al 00 0.00 0.85 0.88 0.96} 7.00 Ma 4Y' TABLE 4 SPACI T = TENSION “Ky i | an | =] i [ANCHOR SPACING @ frm) sze__ [35 [50 [35 [50 | 60 [75 [100 fas [150 m8 [076 Joa foae [roo Mio 0.00 j0.75 [078 [082 |1.00 aatann2 [0 food 8-8 os |092 [1.00 | wig avis ‘onze [0-8 Joes (100 20 8 20 lo.00 0.75 joy jo.32\.99 24 & Y>4 10.00 [0.76 joa Jo. [1.00 ® Ramsar a LE2IGN INFONMAIION - MEDIUM AND HEAVY DUTY ANCHORING WUE | MIT STATE CAPACITIES PER ANCHOR - (SHEAR) ® EPOXY-SET ANCHORS TABLE 5 REDUCED fo, = 06) CHARACTERISTIC ULTIMATE SHEAR CAPACITY “oV,'(kN) CARBON STEEL ANCHOR | Mi Bat SPACING 325] 300 323) 7b 760 TABLES CONCRETE STRENGTH EFFECT - SHEAR ” CONCRETE STRENGTH | 20 | 25 a e iP a aaa] o5rfice| TABLE 7 {DCE DISTANCE EFFECT - SHEAR TABLE 8. SPACING EFFECT [m8 [wio]ara}atig} ee SPACING | MB. hs IM | diam 25 {osa]oa0 200 30 oss |0.66 0.00 4.22]000 40 {o.7 [sa ous ® oa [30 Jozo)ozs jars ost @ — jozslozslor 37! 73 19.78/076|076 79 ie Joasfes2[oe0 1.00 0:38 |0.32]0'38 jo.s3}osa}oas 07% jas 045 1.00 0.38/00] 00) 088) 055 1.0 1.00) 0.81 1.09 TABLE 7 ASSUMES THAT LOAD 1S TOWARDS ENCE IF LOAD PARALLEL TO EOGE. FACTORS ARE DOUBLED BLT ARE ALWAYS 51.0 ° mm ME rormuae §—///AAMMEINDICATIVE COMBINED LOADING CALCULATE EPOXY.SET INTERACTION DIAGRAM vous CHECK NF /oN,, $1 CHECK a2a,€2¢, CALCULATE z WV, ah Keg CHECK Vso <1 2 CHECK é NUON + VJ oy S12 5 2 ALCULATE 40 80 SHEAR “LN @ Ramsar’ DESIGN INFORMATION - MEDIUM ANO HEAVY DUTY ANCHORING UME SPECIEY sauser EPOXY SET € RAMSET CHEM STUD M49 @ 'sTmen Main Embed J MUM LIMIT STATE CAPACITIES FOR STAINLESS STEEL EPOXY-SET ANCHORS - STAINLESS STEEL TABLE 155 REDUCED 0, = 0.6, 0, = CHARACTERISTIC ULTIMATE TENSILE CAPACITY @N, (kN] TERECIIE DerTH ‘mt ['8 [0] wna] Mo] wed] Ee wo aa 7 8 Phe € ro 8 5 | [raja 150 tales 180 {Saja 0 Galea x0 | 780) 5 350 I 160. Dowst ened | 131] 209) 303] 565) 08.2]. Stel onset € TAT NOMINAL DEPTH hy TABLE? CONCRETE STRENGTH EFFECT - TENSION ", [conceetecra [2015 [30] 015] 0] 6 FACTOR sa [osi eal a5) i22| 129] a1 HUME SETTING INFORMATION e EPOXY-SET ANCHORS SETTING DETAILS BOLT DIANETER CC HOLE DIAMETER “hy {wf 2 | 8 mu [| | EFFECTIVE ANCHOR a a LENGTH "ty 160 | NOMINAL FOCTURE “3 2 5 THICKNESS "wy 50 i ASSEMBLY TORQUE; Wm =] 10 i oT 130 | as | 00 xa BI ws | 305 ARTUR HOLE OA a a) 5__| 35 3 NOMINAL EFFECTIVE % %0 v0 ws | tao | FFT hy va_\ mo | niu CONCRETE wo | vo | m0 | vo | 19 | 200 THICKNESS “by = 125A ns | 265 REAR Tra] vie] yao] viv HOLE DIAMETER | 16] 20] 26) 32 @ Romser | FORREAAR I | KMALIGN - MEUlaM AND HEAVY DUTY ANCHORING MUM 6.9 THREADED SOCKETS @ Ramsot PRODUCT USAGE FEATURES High periormance anchor ising Hush with soriace Can be used with a variety of bolt heads Stressitee system with smal spacing and edge distances Can be used with various chemical anchoring Thread protected irorn resin entry MATERIAL SPECIFICATION CARBON STEEL & STAINLESS STEEL —T acnor sou | Siexcr: oy, [VHD] Us crm | wba | oa 8 | 350 | 450 1 | 350_[ 450 12 350 | 450 (ie [aa (ao ae VARIATIONS AVAILABLE CAN BE USED WITH HEX BOLTS OR STUDS ‘SUITABLE FOR FIXING INTO Solid concrete, min 20MPa, Ora cover diameter hole wo recommended Jeph 2an Ses and rade Irae, capsule ‘Slowly spin anchor role thoroughly wth rounded end out vn. Sp te el, $ nyion biush. Remove fers by way of vacsum ump, compressed a, hana pamp ete “Aer curing gh hl with torque wrench recommended assembly fxque YEDIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING MUM MIT STATE CAPACITIES PER ANCHOR - (TENSION) THREADED SOCKETS 6 TABLE! REDUCED (o, = 0.6, 0, = 0.8) CHARACTERISTIC ULTIMATE TENSILE CAPACITY oN, (kN) CARBON STEEL * LIMITED BY INSERT STEEL STRENGTH. re DO NOT INCREASE DUE TO HIGHER CONCRETE STRENGTH, 1b, BOLT CAPACITIES MUST BE CHECKED AGAINST Taal isle TABLE 2 CONCRETE STRE TH EFFECT - TENSION %e “CONCRETE fc (MPai uls]2 fo] e ACTOR cm faa fine) 10} TABLE 2a CONCRETE STRENGTH CONVERSION (MPab CUBE STR Pe | [owners fale lsr| TABLE 3. REDUCED [0,=0.8) BOLT CAPACITIES @h, (KN) TENSION e BOLT GRADE 7 ‘BOLT SIZE we [io | wt | wre [om Te 720 [aa [ies [3a fo Pees 8B | ied [93] 53 LBs sy TABLE 4a ABSOLUTE MINIMUM TABLE 4 EDGE DSTANCE EFFECT TENSION xy Bote Ostenc! ce tn RE IEDR ea iar ye sat B]®)|s>e > ee] Sie @ wa [oes | 096 | 3.00 . ] wees wie | 80 | 88 [08 | | imo | | wi |oa0 | oat | os | 1.00 tS we ooo fuss tome Tr TJ ; 20 0.90 | 083 } 031 } 1.00 | Mie 50 STEER mao eo} SPACING EFF! %y TABLE Sa ABSOLUTE MINIMUM ANCHOR ‘SPACING ‘a’ Imm) SPACING ‘@p nem} ar [tor 7 an sae Ti [ Sizk ns % Mid = = we | v0 va [was cap [ae Ls ast | 092 | 100 @ @ Rameor DESIGN INFORMATION . MEDIUM AND HEAVY DUTY ANCHORING IMUMBE M17 STATE CAPACITIES PER ANCHOR - (SHEAR) @ THREADED SOCKETS TABLES. REDUCES 61 CHARACTERISTIC ULTIMATE SHEAR CAPACITY ‘0, tk) CARBON STE ANCHO? | MB] ao | mI | BAGNG | 50 109 3 ton woeoist | 75 | 100 | 125 al | git | 62 | woe bes | 0 | 370 a, REDUCED (0,0.81 BOLT CAPACITIES Vs (kN) SHEAR TOUT GRA TOT SE [ae [Loar | 100 | vas ma | 0 | TABLE § CONCRETE STRENGT? mol 0 3 |e j TABLE7_EDGE DISTANCE EFFECT - SHEAR "ty TABLE9 SPACING EFFECT woceost | we | M0] wiz] MI6 ] M20 SPACING m0 | oF To wae emm | toim | % bom [ow | 089 | om @ 3 fom) ee | ae % Oe [38 [om 10 _| 046 | 034 | 027 | 096 } 08s | 085 | o75 @ [ors [om Pon 1 fog fou | oom 7% | 100 | 070 | 54 ge | o22 | 080 1 | 00 | 076 0 8s 135 i 700 { 7.00 [ost | 0.28 | 130, | 1.00 } 032 v5 / | rp | 0.96 200 I a0 | TABLET ASSUMES THAT LOAD 5 TOWARDS EDGE LOAD PARALLEL TO EDGE, FACTORS ARE BOUBLED BUT ARE ALWAYS st * ame FORMULAE §—_///|AMMMNIDICATIVE COMBINED LOADING CALCULAT THREADED SOCKETS ON, FON, Hy Xe oy INTERACTION DIAGRAMS CHECK Nt ONS 50 INJECTION SYSTEM ours CAPS KEFOXYSET _soure CHECK a2 an€ 260 CALCULATE OV, = OV, HX Xe CHECK Voy eI CHECK Ne/ oN # VF Vy S12 TENSION "of" (kN) SHEAR ‘o\ KN) rh. SRCRADE OTS @ Ramssr VEDIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING |AIM SPECIFY Cheri anne sen TaN REDE SOCKET é fakes /MUBE UNIT STATE CAPACITIES FOR STAINLESS STEEL THREADED SOCKETS - STAINLESS STEEL TABLE 195, CHARAC} DUCED (0, = 08, 0, = 0.8) TIC ULTIMATE TENSILE CAPACITY ON, {kN} | CHENSET NECTION SYSTEM CHEMSET CAPSULES EASE DUE TO HIGHER CONCRETE STRENGTH, NOTE 1. BOUT CAPACITY 700 UTS STAINLESS STEEL BOLT CAPACITIES EXCEED INSERT STRENGTHS TABLE dss REDUCED (0,-0.8) ‘BOLT CAPACITIES of SHEAR e SOCTCRACE| sot ——~*d me [mn [ wa | we [x0 | routs [ua [ire fas [arr HUME SETTING INFORMATION ° THREADED SOCKET SETTING DETAILS * [Sour CiAMerEeR ay MB mio Ls wo HOLE DIAMETER “4 a a [3 30 ASSEWaLY TORQUE 7) New ie 20 35 2 | NowNal fective T_% 30 100 ui DEPTH hy ‘Mindi CONCRETE 700 120 130 3 20 THICKNESS, @ Ramsor 50 JAUME Nore @ @ NFURMAIIOM - MEUIUM AND HEAVY DUTY ANCHORING DESIGN INFORMATION - MEDIUM AND HEAVY DUTY ANCHORING UME Notes Ramset _ Fosteviing Sustoms 1 auinen — oultes RAMSET (THAILAND) LIMITED 2 SOT 24 CHAEOENKRUNG ROAD, SI PRAY, BANGEAI, BaNeTOK “07% TEL.: 2b SAP 90 FAX! 2b 5990 is mal wor bed 0 9/8 aon od in ira rie il a) (ne "Var ate def pun od et ge ro fs Pr Gnd dl heen, gre war Hees rele ngs ma oe Sate fs Be dedety vere Te a sted oy a, Roa Ses Ps Py Une, OW a NS ‘al abe keer nein oo tycoon a= ed a ay bk {dono rang oan ase Song) ote eto adn wi Be from te terten wy poneed mona ook eso pon ay ba peed in ary or moe he waite amin Reet Fess ut 0 The elometan coed hs mort ge gon ah at wit fig any wera 2 inion shh many inain by nga egal ha, rey tr me Layo oa ot fda mgr ‘hel onan fame fame tal Pando st ons 9 se a uh ch roan ‘sraorn howl ancl matin he Beano ube a Bae wi! a, MOpILE 3 Ot- Bt9-a1t0

You might also like