pi@mainsail:~ $ sudo dmesg -e

[Jan21 08:58] Booting Linux on physical CPU 0x0

[ +0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8
(Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642
SMP Mon Apr 3 17:20:52 BST 2023
[ +0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ +0.000000] CPU: div instructions available: patching division code
[ +0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction
cache
[ +0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ +0.000000] random: crng init done
[ +0.000000] Memory policy: Data cache writealloc
[ +0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB
[ +0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-
dma-pool
[ +0.000000] Zone ranges:
[ +0.000000] DMA [mem 0x0000000000000000-0x0000000035ffffff]
[ +0.000000] Normal empty
[ +0.000000] Movable zone start for each node
[ +0.000000] Early memory node ranges
[ +0.000000] node 0: [mem 0x0000000000000000-0x0000000035ffffff]
[ +0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000035ffffff]
[ +0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632
[ +0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096
[ +0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ +0.000000] Built 1 zonelists, mobility grouping on. Total pages: 219240
[ +0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0
snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1
snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200
console=tty1 root=PARTUUID=9c7cefc0-02 rootfstype=ext4 fsck.repair=yes rootwait
cfg80211.ieee80211_regdom=US
[ +0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes,
linear)
[ +0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ +0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ +0.000000] Memory: 595664K/884736K available (10240K kernel code, 1452K rwdata,
2900K rodata, 1024K init, 613K bss, 26928K reserved, 262144K cma-reserved)
[ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ +0.000000] ftrace: allocating 34800 entries in 103 pages
[ +0.000000] ftrace: allocated 102 pages with 4 groups
[ +0.000000] trace event string verifier disabled
[ +0.000000] rcu: Hierarchical RCU implementation.
[ +0.000000] Rude variant of Tasks RCU enabled.
[ +0.000000] Tracing variant of Tasks RCU enabled.
[ +0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10
jiffies.
[ +0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ +0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ +0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ +0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x46d987e47, max_idle_ns: 440795202767 ns
[ +0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every
4398046511078ns
[ +0.000017] Switching to timer-based delay loop, resolution 52ns
[ +0.000366] Console: colour dummy device 80x30
[ +0.000628] printk: console [tty1] enabled
[ +0.000063] Calibrating delay loop (skipped), value calculated using timer
frequency.. 38.40 BogoMIPS (lpj=192000)
[ +0.000046] pid_max: default: 32768 minimum: 301
[ +0.000160] LSM: Security Framework initializing
[ +0.000219] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ +0.000044] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes,
linear)
[ +0.001158] cgroup: Disabling memory control group subsystem
[ +0.000256] CPU: Testing write buffer coherency: ok
[ +0.000425] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ +0.000861] cblist_init_generic: Setting adjustable number of callback queues.
[ +0.000039] cblist_init_generic: Setting shift to 2 and lim to 1.
[ +0.000129] cblist_init_generic: Setting shift to 2 and lim to 1.
[ +0.000161] Setting up static identity map for 0x100000 - 0x10003c
[ +0.000155] rcu: Hierarchical SRCU implementation.
[ +0.000024] rcu: Max phase no-delay instances is 1000.
[ +0.000725] smp: Bringing up secondary CPUs ...
[ +0.000917] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ +0.000950] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ +0.000876] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ +0.000102] smp: Brought up 1 node, 4 CPUs
[ +0.000083] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ +0.000028] CPU: All CPU(s) started in HYP mode.
[ +0.000019] CPU: Virtualization extensions available.
[ +0.000734] devtmpfs: initialized
[ +0.015137] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev
4
[ +0.000240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604462750000 ns
[ +0.000054] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ +0.010353] pinctrl core: initialized pinctrl subsystem
[ +0.001232] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ +0.003225] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ +0.005097] audit: initializing netlink subsys (disabled)
[ +0.000268] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0
res=1
[ +0.000614] thermal_sys: Registered thermal governor 'step_wise'
[ +0.001003] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ +0.000053] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ +0.000260] Serial: AMBA PL011 UART driver
[ +0.005829] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ +0.017518] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-
17T10:52:42, variant start
[ +0.010014] raspberrypi-firmware soc:firmware: Firmware hash is
82f3750a65fadae9a38077e3c2e217ad158c8d54
[ +0.042370] kprobes: kprobe jump-optimization is enabled. All kprobes are
optimized if possible.
[ +0.005894] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ +0.001695] SCSI subsystem initialized
[ +0.000258] usbcore: registered new interface driver usbfs
[ +0.000080] usbcore: registered new interface driver hub
[ +0.000069] usbcore: registered new device driver usb
[ +0.000238] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ +0.000185] usb_phy_generic phy: dummy supplies not allowed for exclusive
requests
[ +0.000286] pps_core: LinuxPPS API ver. 1 registered
[ +0.000025] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ +0.000050] PTP clock support registered
[ +1.878069] clocksource: Switched to clocksource arch_sys_counter
[ +0.097787] VFS: Disk quotas dquot_6.6.0
[ +0.000124] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ +0.000170] FS-Cache: Loaded
[ +0.000324] CacheFiles: Loaded
[ +0.008718] NET: Registered PF_INET protocol family
[ +0.000307] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ +0.002511] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096
bytes, linear)
[ +0.000099] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,
linear)
[ +0.000106] TCP established hash table entries: 8192 (order: 3, 32768 bytes,
linear)
[ +0.000140] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ +0.000349] TCP: Hash tables configured (established 8192 bind 8192)
[ +0.000156] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ +0.000072] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ +0.000236] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ +0.000530] RPC: Registered named UNIX socket transport module.
[ +0.000028] RPC: Registered udp transport module.
[ +0.000022] RPC: Registered tcp transport module.
[ +0.000021] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ +0.001708] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters
available
[ +0.003105] Initialise system trusted keyrings
[ +0.000259] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ +0.009228] zbud: loaded
[ +0.002383] NFS: Registering the id_resolver key type
[ +0.000053] Key type id_resolver registered
[ +0.000023] Key type id_legacy registered
[ +0.000155] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ +0.000030] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ +0.001298] Key type asymmetric registered
[ +0.000028] Asymmetric key parser 'x509' registered
[ +0.000233] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ +0.000034] io scheduler mq-deadline registered
[ +0.000029] io scheduler kyber registered
[ +0.003976] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000,
0x151800 bytes
[ +0.000062] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8,
mode=720x480x32, linelength=2880
[ +0.004724] Console: switching to colour frame buffer device 90x30
[ +0.006623] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered!
[ +0.007117] bcm2835-rng 3f104000.rng: hwrng registered
[ +0.002908] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000
mem_size:0x40000000(1024 MiB)
[ +0.005877] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at
0x3f200000
[ +0.013352] brd: module loaded
[ +0.010041] loop: module loaded
[ +0.003180] Loading iSCSI transport class v2.0-870.
[ +0.004034] usbcore: registered new interface driver lan78xx
[ +0.002659] usbcore: registered new interface driver smsc95xx
[ +0.002598] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ +0.730669] Core Release: 2.80a
[ +0.002544] Setting default values for core params
[ +0.002507] Finished setting default values for core params
[ +0.202765] Using Buffer DMA mode
[ +0.002500] Periodic Transfer Interrupt Enhancement - disabled
[ +0.002534] Multiprocessor Interrupt Enhancement - disabled
[ +0.002481] OTG VER PARAM: 0, OTG VER FLAG: 0
[ +0.002498] Dedicated Tx FIFOs mode

[ +0.003352] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000

dma = 0xded04000 len=9024
[ +0.007242] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ +0.011252] dwc_otg: Microframe scheduler enabled

[ +0.000119] WARN::hcd_init_fiq:457: FIQ on core 1

[ +0.004085] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36

[ +0.003984] WARN::hcd_init_fiq:497: MPHI regs_base at b6810000

[ +0.004089] dwc_otg 3f980000.usb: DWC OTG Controller
[ +0.002145] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ +0.002194] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[ +0.002162] Init: Port Power? op_state=1
[ +0.002100] Init: Power Port (0)
[ +0.002266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.01
[ +0.004250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.002256] usb usb1: Product: DWC OTG Controller
[ +0.002218] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd
[ +0.002270] usb usb1: SerialNumber: 3f980000.usb
[ +0.002877] hub 1-0:1.0: USB hub found
[ +0.002244] hub 1-0:1.0: 1 port detected
[ +0.002730] dwc_otg: FIQ enabled
[ +0.000010] dwc_otg: NAK holdoff enabled
[ +0.000009] dwc_otg: FIQ split-transaction FSM enabled
[ +0.000014] Module dwc_common_port init
[ +0.000330] usbcore: registered new interface driver usb-storage
[ +0.002369] mousedev: PS/2 mouse device common for all mice
[ +0.004897] sdhci: Secure Digital Host Controller Interface driver
[ +0.002231] sdhci: Copyright(c) Pierre Ossman
[ +0.002616] sdhci-pltfm: SDHCI platform and OF driver helper
[ +0.004172] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.002575] hid: raw HID events driver (C) Jiri Kosina
[ +0.002427] usbcore: registered new interface driver usbhid
[ +0.002283] usbhid: USB HID core driver
[ +0.006366] Initializing XFRM netlink socket
[ +0.002309] NET: Registered PF_PACKET protocol family
[ +0.002323] Key type dns_resolver registered
[ +0.003038] Registering SWP/SWPB emulation handler
[ +0.002864] registered taskstats version 1
[ +0.002205] Loading compiled-in X.509 certificates
[ +0.002945] Key type .fscrypt registered
[ +0.002182] Key type fscrypt-provisioning registered
[ +0.013494] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ +0.002287] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud =
0) is a PL011 rev2
[ +0.006141] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ +0.002585] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ +0.003525] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ +0.002267] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ +0.029952] sdhost: log_buf @ ca77366a (ded03000)
[ +0.011957] Indeed it is in host mode hprt0 = 00021501
[ +0.039938] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ +0.011847] of_cfs_init
[ +0.002322] of_cfs_init: OK
[ +0.003290] Waiting for root device PARTUUID=9c7cefc0-02...
[ +0.020268] mmc0: host does not support reading read-only switch, assuming write-
enable
[ +0.005773] mmc0: new high speed SDHC card at address 0007
[ +0.003236] mmcblk0: mmc0:0007 SD32G 29.0 GiB
[ +0.006500] mmcblk0: p1 p2
[ +0.006093] mmc1: new high speed SDIO card at address 0001
[ +0.002911] mmcblk0: mmc0:0007 SD32G 29.0 GiB
[ +0.028134] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ +0.002359] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ +0.077264] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ +0.002611] Indeed it is in host mode hprt0 = 00001101
[ +0.124970] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ +0.020494] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[ +0.002450] EXT4-fs (mmcblk0p2): recovery complete
[ +0.028757] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota
mode: none.
[ +0.004606] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ +0.011337] devtmpfs: mounted
[ +0.007917] Freeing unused kernel image (initmem) memory: 1024K
[ +0.007328] Run /sbin/init as init process
[ +0.002312] with arguments:
[ +0.000007] /sbin/init
[ +0.000008] with environment:
[ +0.000006] HOME=/
[ +0.000007] TERM=linux
[ +0.027427] usb 1-1: New USB device found, idVendor=0424, idProduct=2514,
bcdDevice= b.b3
[ +0.004883] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.003258] hub 1-1:1.0: USB hub found
[ +0.002709] hub 1-1:1.0: 4 ports detected
[ +0.318915] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ +0.130262] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514,
bcdDevice= b.b3
[ +0.001419] systemd[1]: System time before build time, advancing clock.
[ +0.003691] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.006101] hub 1-1.1:1.0: USB hub found
[ +0.002798] hub 1-1.1:1.0: 3 ports detected
[ +0.250811] NET: Registered PF_INET6 protocol family
[ +0.004136] Segment Routing with IPv6
[ +0.002609] In-situ OAM (IOAM) with IPv6
[ +0.088452] systemd[1]: systemd 247.3-7+rpi1+deb11u2 running in system mode.
(+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=unified)
[ +0.009012] systemd[1]: Detected architecture arm.
[ +0.000394] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ +0.023243] systemd[1]: Set hostname to <mainsail>.
[ +0.517070] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ +0.130405] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800,
bcdDevice= 3.00
[ +0.005145] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ +0.267599] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External
EEPROM. Setting MAC Speed
[ +0.025798] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb
period 64
[ +0.307124] systemd[1]: Queued start job for default target Multi-User System.
[ +0.048796] systemd[1]: Created slice system-getty.slice.
[ +0.007555] systemd[1]: Created slice system-modprobe.slice.
[ +0.007127] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ +0.007059] systemd[1]: Created slice User and Session Slice.
[ +0.006728] systemd[1]: Started Dispatch Password Requests to Console Directory
Watch.
[ +0.006531] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ +0.007526] systemd[1]: Set up automount Arbitrary Executable File Formats File
System Automount Point.
[ +0.009858] systemd[1]: Reached target Local Encrypted Volumes.
[ +0.007320] systemd[1]: Reached target Paths.
[ +0.006826] systemd[1]: Reached target Slices.
[ +0.006405] systemd[1]: Reached target Swap.
[ +0.007371] systemd[1]: Listening on Syslog Socket.
[ +0.006758] systemd[1]: Listening on fsck to fsckd communication Socket.
[ +0.006446] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ +0.007378] systemd[1]: Listening on Journal Audit Socket.
[ +0.006762] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0.006863] systemd[1]: Listening on Journal Socket.
[ +0.011028] systemd[1]: Listening on udev Control Socket.
[ +0.006696] systemd[1]: Listening on udev Kernel Socket.
[ +0.006805] systemd[1]: Condition check resulted in Huge Pages File System being
skipped.
[ +0.096497] systemd[1]: Mounting POSIX Message Queue File System...
[ +0.010943] systemd[1]: Mounting RPC Pipe File System...
[ +0.011984] systemd[1]: Mounting Kernel Debug File System...
[ +0.012121] systemd[1]: Mounting Kernel Trace File System...
[ +0.007358] systemd[1]: Condition check resulted in Kernel Module supporting
RPCSEC_GSS being skipped.
[ +0.013564] systemd[1]: Starting Restore / save the current clock...
[ +0.013873] systemd[1]: Starting Set the console keyboard layout...
[ +0.013066] systemd[1]: Starting Create list of static device nodes for the
current kernel...
[ +0.016717] systemd[1]: Starting Load Kernel Module configfs...
[ +0.013653] systemd[1]: Starting Load Kernel Module drm...
[ +0.013399] systemd[1]: Starting Load Kernel Module fuse...
[ +0.018941] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ +0.011756] systemd[1]: Starting File System Check on Root Device...
[ +0.019917] systemd[1]: Starting Journal Service...
[ +0.028569] systemd[1]: Starting Load Kernel Modules...
[ +0.008426] fuse: init (API version 7.37)
[ +0.008874] systemd[1]: Starting Coldplug All udev Devices...
[ +0.029945] systemd[1]: Mounted POSIX Message Queue File System.
[ +0.007467] systemd[1]: Mounted RPC Pipe File System.
[ +0.006900] systemd[1]: Mounted Kernel Debug File System.
[ +0.023952] systemd[1]: Mounted Kernel Trace File System.
[ +0.007485] systemd[1]: Finished Restore / save the current clock.
[ +0.013512] systemd[1]: Finished Create list of static device nodes for the
current kernel.
[ +0.010969] systemd[1]: [email protected]: Succeeded.
[ +0.004266] systemd[1]: Finished Load Kernel Module configfs.
[ +0.007748] systemd[1]: [email protected]: Succeeded.
[ +0.004688] systemd[1]: Finished Load Kernel Module fuse.
[ +0.008849] systemd[1]: Finished Load Kernel Modules.
[ +0.141178] systemd[1]: Mounting FUSE Control File System...
[ +0.014359] systemd[1]: Mounting Kernel Configuration File System...
[ +0.012448] systemd[1]: Started File System Check Daemon to report status.
[ +0.013161] systemd[1]: Starting Apply Kernel Variables...
[ +0.014457] systemd[1]: Started Journal Service.
[ +0.213624] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ +0.138560] systemd-journald[139]: Received client request to flush runtime
journal.
[ +0.034615] systemd-journald[139]: File
/var/log/journal/929461c6cccd4ead895927853f270504/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ +1.371608] vc_sm_cma: module is from the staging directory, the quality is
unknown, you have been warned.
[ +0.002394] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ +0.000043] [vc_sm_connected_init]: start
[ +0.007118] [vc_sm_connected_init]: installed successfully
[ +0.026091] mc: Linux media interface: v0.10
[ +0.137786] videodev: Linux video capture interface: v2.00
[ +0.059640] snd_bcm2835: module is from the staging directory, the quality is
unknown, you have been warned.
[ +0.023713] bcm2835_audio bcm2835_audio: card created with 8 channels
[ +0.034314] bcm2835_mmal_vchiq: module is from the staging directory, the quality
is unknown, you have been warned.
[ +0.061957] bcm2835_mmal_vchiq: module is from the staging directory, the quality
is unknown, you have been warned.
[ +0.026052] bcm2835_isp: module is from the staging directory, the quality is
unknown, you have been warned.
[ +0.027387] bcm2835-isp bcm2835-isp: Device node output[0] registered as
/dev/video13
[ +0.015736] bcm2835-isp bcm2835-isp: Device node capture[0] registered as
/dev/video14
[ +0.000648] bcm2835-isp bcm2835-isp: Device node capture[1] registered as
/dev/video15
[ +0.000456] bcm2835-isp bcm2835-isp: Device node stats[2] registered as
/dev/video16
[ +0.000036] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ +0.000022] bcm2835-isp bcm2835-isp: Register capture node 1 with media
controller
[ +0.000016] bcm2835-isp bcm2835-isp: Register capture node 2 with media
controller
[ +0.000022] bcm2835-isp bcm2835-isp: Register capture node 3 with media
controller
[ +0.006619] bcm2835-isp bcm2835-isp: Device node output[0] registered as
/dev/video20
[ +0.001201] bcm2835-isp bcm2835-isp: Device node capture[0] registered as
/dev/video21
[ +0.000432] bcm2835-isp bcm2835-isp: Device node capture[1] registered as
/dev/video22
[ +0.002351] bcm2835_v4l2: module is from the staging directory, the quality is
unknown, you have been warned.
[ +0.019784] bcm2835_codec: module is from the staging directory, the quality is
unknown, you have been warned.
[ +0.004868] bcm2835-isp bcm2835-isp: Device node stats[2] registered as
/dev/video23
[ +0.000112] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ +0.000088] bcm2835-isp bcm2835-isp: Register capture node 1 with media
controller
[ +0.000081] bcm2835-isp bcm2835-isp: Register capture node 2 with media
controller
[ +0.000078] bcm2835-isp bcm2835-isp: Register capture node 3 with media
controller
[ +0.000966] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ +0.060215] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ +0.000177] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ +0.012432] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ +0.000071] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ +0.008785] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ +0.000074] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ +0.007167] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ +0.000074] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ +0.006906] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ +0.000073] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ +0.306673] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ +0.234794] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ +0.018506] cfg80211: loaded regulatory.db is malformed or signature is
missing/invalid
[ +0.354626] Console: switching to colour dummy device 80x30
[ +0.026628] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ +0.053224] Registered IR keymap rc-cec
[ +0.038834] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ +0.027864] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
[ +0.027097] brcmfmac: F1 signature read @0x18000000=0x15264345
[ +0.008941] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for
chip BCM4345/6
[ +0.016147] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ +0.000585] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ +0.000446] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ +0.000437] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ +0.000425] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ +0.000354] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ +0.030747] usbcore: registered new interface driver brcmfmac
[ +0.051116] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ +0.007795] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ +0.157242] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021
00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ +0.877981] uart-pl011 3f201000.serial: no DMA platform data
[ +0.110369] Adding 102396k swap on /var/swap. Priority:-2 extents:1
across:102396k SSFS
[ +0.108162] 8021q: 802.1Q VLAN Support v1.8
[ +0.275382] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ +0.271547] lan78xx 1-1.1.1:1.0 eth0: Link is Down
[ +0.004432] 8021q: adding VLAN 0 to HW filter on device eth0
[ +5.354744] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ +1.170812] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall)
net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms
instead
[ +0.138547] Bluetooth: Core ver 2.22
[ +0.000085] NET: Registered PF_BLUETOOTH protocol family
[ +0.000005] Bluetooth: HCI device and connection manager initialized
[ +0.000017] Bluetooth: HCI socket layer initialized
[ +0.000008] Bluetooth: L2CAP socket layer initialized
[ +0.000013] Bluetooth: SCO socket layer initialized
[ +0.012935] Bluetooth: HCI UART driver ver 2.3
[ +0.000021] Bluetooth: HCI UART protocol H4 registered
[ +0.000071] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ +0.000127] Bluetooth: HCI UART protocol Broadcom registered
[ +0.550917] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ +0.000020] Bluetooth: BNEP filters: protocol multicast
[ +0.000014] Bluetooth: BNEP socket layer initialized
[ +0.005866] Bluetooth: MGMT ver 1.22
[ +0.011760] NET: Registered PF_ALG protocol family
[ +0.023422] cryptd: max_cpu_qlen set to 1000
[ +5.680505] systemd-journald[139]: File
/var/log/journal/929461c6cccd4ead895927853f270504/user-1000.journal corrupted or
uncleanly shut down, renaming and replacing.
[Jan21 08:59] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg
[ +0.132990] usb 1-1.1.2: New USB device found, idVendor=1a86, idProduct=7523,
bcdDevice= 2.64
[ +0.000041] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ +0.000016] usb 1-1.1.2: Product: USB Serial
[ +0.101720] usbcore: registered new interface driver usbserial_generic
[ +0.001835] usbserial: USB Serial support registered for generic
[ +0.008218] usbcore: registered new interface driver ch341
[ +0.005789] usbserial: USB Serial support registered for ch341-uart
[ +0.000458] ch341 1-1.1.2:1.0: ch341-uart converter detected
[ +0.003521] usb 1-1.1.2: ch341-uart converter now attached to ttyUSB0
[Jan21 09:08] usb 1-1.1.2: USB disconnect, device number 5
[ +0.000680] ch341-uart ttyUSB0: ch341-uart converter now disconnected from
ttyUSB0
[ +0.000098] ch341 1-1.1.2:1.0: device disconnected
[ +35.619227] usb 1-1.1.2: new full-speed USB device number 6 using dwc_otg
[ +0.133060] usb 1-1.1.2: New USB device found, idVendor=1a86, idProduct=7523,
bcdDevice= 2.64
[ +0.000036] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ +0.000016] usb 1-1.1.2: Product: USB Serial
[ +0.000902] ch341 1-1.1.2:1.0: ch341-uart converter detected
[ +0.002292] usb 1-1.1.2: ch341-uart converter now attached to ttyUSB0
[Jan21 09:41] usb 1-1.1.2: USB disconnect, device number 6
[ +0.000669] ch341-uart ttyUSB0: ch341-uart converter now disconnected from
ttyUSB0
[ +0.000097] ch341 1-1.1.2:1.0: device disconnected
[Jan21 09:42] usb 1-1.1.2: new full-speed USB device number 7 using dwc_otg
[ +0.133056] usb 1-1.1.2: New USB device found, idVendor=1a86, idProduct=7523,
bcdDevice= 2.64
[ +0.000037] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ +0.000016] usb 1-1.1.2: Product: USB Serial
[ +0.001022] ch341 1-1.1.2:1.0: ch341-uart converter detected
[ +0.002302] usb 1-1.1.2: ch341-uart converter now attached to ttyUSB0