Making Technology Visible

COMPUTER HARDWARE AND NETWORK

TECHNOLOGY TRAINING SYSTEMS

Also Featuring Classroom 21 System for Blended Learning

Colour Laser Printer Colour Laser Printer Colour Laser Printer Colour Laser Printer Multi Function Printer
- - - - -
CAP-CPM-4 CAP-CPM-4 CAP-CPM-4 CAP-CPM-4 CAP-CST-2

LAN Switch Trainer Modem

- -
CLP-HST CAP-MDM-1

Computer Network Trainer Scanner Trainer

- -
CLP Series CAP-CST-1
COMPUTER TROUBLE
SHOOTING
Network Security Trainer LED Monitor Trainer
- TRAINERS -
CLP NST - CHT-CMT-C

CHT-CTT Series
HDD LCD Project Trainer
- -
CHT-CDT-3 CAP-LCD-1

DVD-RW UPS Trainer

- TOTAL -
CHT-CDT-7 CAP-UPS-1
214 FAULTS
BLUE RAY-RW Switching Power Supply
- -
CHT-CDT-9 CAP-SPS-1

labtech.org labtech-latam.com labtech-academy.com

 LABTECH PROFILE

LABTECH – the International Technical Educational Company

LABTECH was formed over 30 years ago and is one of the largest Technical and Vocational educational systems
designers and manufacturers in the world. Labtech's prime focus is to provide comprehensive 21st century skills
infused technical and engineering learning solutions for Vocational Technical Schools, Polytechnics, Universities
and Training Institutions. The development of LABTECH has been guided by professional educators from North
America, Europe and Asia that have many years of experience in the field of international education.

Our Systems Approach design philosophy of “Making Technology Visible” is based on modular learning platforms
and exposing key functional systems so as to clearly demonstrate the underlying technologies. We allow students
to get close to technology by adopting a “hands-on” approach to training that combines theory as well as practical
experiments. The result of this is that students have a clearer understanding of how technology works and its
applications to industry and the work place. Many of our trainers have Fault Insertion systems that simulate
common real-world faults with troubleshooting solutions facilitating real hands-on skills. Our Modular educational
approach enables us to create systematic integrated solutions for varying syllabus levels, ranging from
occupational skills standards and upwards to university degrees in engineering.

LABTECH has developed over 1.000 major training products which form a systematic educational program and we
have exported these to over 90 countries worldwide. The technical training systems that LABTECH manufactures
are made to International standards of quality and we are ISO 9001 certified in eight areas including educational
research and development. LABTECH has a comprehensive R&D department and a sophisticated range of
manufacturing equipment. LABTECH can assist training institution or projects by offering a complete service for
equipping technology workshops or laboratories in our key technology areas including provision of training
systems, educational aids, models, support tools and testing equipment.

Our training manuals are comprehensive teaching and learning guides which are student-centric and oriented for
self-studies. The manuals include information on applied theory; related engineering information; set-up &
operation; skills focused experiments; schematics & diagrams; along with troubleshooting solutions. We have active
cooperative programs with leading educational and industrial institutions within our region who work together with
us in our product research and development. Our trainers incorporate the latest technology so that education may
keep pace with the changing economy.

Our manufacturing base is strategically located in a Free Trade Zone location on Batam Island nearby Singapore
which allows us to easily ship all over the world. We also have marketing and distribution offices in Singapore,
Malaysia, Jakarta, Australia, UK, and Jordan in order to facilitate communications, service support and financial
transactions with our customer’s world wide. We also have representatives in dozens of countries who act as our
local partners on project implementation. Our unique international corporate structure allows us to globally
market high quality products and services at reasonable costs.

Industry & Technology Partnerships and Memberships

Labtech has a network of industry and technology partners that
enables us to widen our product offerings and better align our
objectives with the end result of producing employable skills.
Partnering with some of the most innovative technology
companies in the world, including Microsoft and Intel. We are also
members of ISTE (International Society of Technology in
Education), CompTIA (Computing Technology Industry
Association), IVETA (International Vocational Education & Training
Association), Worlddidac. We also produce training systems for
Toyota and for Schneider Electric This global network makes us
uniquely aligned to meet the needs of educational institutions
around the globe.
 INTRODUCTION
Computer Information Technology
Labtech produces one of the most comprehensive lines of training equipment for Information
Communication Technology. Computer training is always a challenge, as the technology as advancing so
rapidly. The Labtech product lines are updated every year to bring the latest technology to the classrooms.

Our trainers focus on providing releveant skills to computer hardware and software technicians and
engineering students. They cover all aspects of computer assembly, Troubleshooting, Diagnostics,
Maintenance and Repair. Teh training courses follow closely to the “A+” and “Network+” Certification Standards
from CompTIA, which have become the world’s benchmarked standards for IT training.

CLASSROOM 21 CMS-21st CENTURY EDUCATIONAL PLATFORM FOR BLENDED LEARNING

Classromm Management System and Language Laboratory

Classroom 21 CMS is 21st Century learning platform from Labtech that addresses the growing needs of
educators to control multimedia labs and enhance their use and educational value. It is a modular software
system that can be expanded from a comprehensive classroom management system (CMS) into a full
featured language lab that is second to none. The Classroom CMS emulates many Web 2.0 technologies such
as chat and video conferencing (Skype) without having to utilize the internet. It is a true 21st Century
Educational Platform that can control the classroom, regulate access to the internet, and also lauch
educational programs and learning activities. The program is available in a number of upgradable formats.
CONTENTS
CHT – COMPUTER HARDWARE TECHNICIAN 1
Computer Troubleshooting Trainer 1
Laptop Troubleshoot Trainer 2
Server Troubleshooting Trainer 2
LCD Computer Monitor Trainer 2
LED Computer Monitor Trainer 3
Disk Drive Trainer (Floppy) 3
Disk Drive Trainer (Hard Disk) 3
Disk Drive Trainer (DVD) 4
Disk Drive Trainer (DVD-RW) 4
Disk Drive Trainer (Blue-Ray) 4
Disk Drive Trainer (Blu-Ray RW) 5
Optional Accessories For Computer 5
The Visible Computer 5
CAP – COMPUTER ASSEMBLY 6
Computer Systems Servicing Trainer 6
Laptop For Assembly Skills 6
LaserJet Printer Trainer 7
Dot Matrix Printer Trainer 7
Color Ink Jet Printer Trainer 7
Color LaserJet Printer Trainer 8
Color Scanner Trainer 8
Multifunction Printer/Scanner/Fax/Copier Trainer 8
Computer Modem Trainer 9
LCD Projector Trainer 9
Computer UPS Trainer 9
Switching Power Supply Trainer 9
CLP – COMPUTER TECHNICIAN 10
Basic PC Network SYSTEM Trainer 10
Network and Cabling Trainer 11
LAN Switch Trainer 11
Practical LAN Trainer 12
Practical WAN Trainer 13
Network Security Trainer 14
FBC New fiber optic communications 15
CPA – DATA ACQUISITION SYSTEM & CONTROL 16
Signal Conditioning Trainer for Data Acquisition 16
Sensor and Transducer Trainer 16
Data Acquisition and Control Trainer 16
Electronic Washing Machine Trainer 16
CMM – MICROCOMPUTER & MICROPROCESSOR 17
Advance Digital Application Modules 17
8085 Microprocessor trainer 17
8088 Microprocessor Trainer 17
6811 Motorolla Microprocessor Trainer 18
Motorolla 68000 18
Microcontroller Trainer 19
Pal/Gal Programmer Trainer 19
Programmer 19
Analog Computing Trainer 19
Mod Acc Interface Microprocessor 20
CHT – COMPUTER HARDWARE TECHNICIAN
 CHT – COMPUTER HARDWARE TECHNICIAN

Colour Laser Printer Colour Laser Printer Colour Laser Printer Colour Laser Printer Multi Function Printer
- - - - -
CAP-CPM-4 CAP-CPM-4 CAP-CPM-4 CAP-CPM-4 CAP-CST-2

LAN Switch Trainer Modem

- -
CLP-HST CAP-MDM-1

Computer Network Trainer Scanner Trainer

- -
CLP Series CAP-CST-1
COMPUTER TROUBLE
SHOOTING
Network Security Trainer LED Monitor Trainer
- TRAINERS -
CLP NST - CHT-CMT-C

CHT-CTT Series
HDD LCD Project Trainer
- -
CHT-CDT-3 CAP-LCD-1

DVD-RW UPS Trainer

- TOTAL -
CHT-CDT-7 CAP-UPS-1
214 FAULTS
BLUE RAY-RW Switching Power Supply
- -
CHT-CDT-9 CAP-SPS-1

COMPUTER TROUBLESHOOTING TRAINER

Model Number : CHT-CTT
Educational Objectives:
Identify basic procedures for adding and removing field replaceable modules.
Configure and apply BIOS setting.
Identify motherboard components, their purposes, and properties.
Differentiate among various CPU types and features and select the appropriate
configuration.
Identify common symptoms and problems associated with each module and how
to troubleshoot and isolate the problems.
Given a scenario, use appropriate safety procedures.
How to identify and use various types of preventive maintenance products and
procedures.
Explain environmental impacts and the purpose of environmental controls.
Compare and contrast the features and requirements of various Microsoft
Operating Systems.
How to identify and use varios types of preventive mainta=enance producrts and
procedures.

1
 CHT – COMPUTER HARDWARE TECHNICIAN

LAPTOP TROUBLESHOOTING TRAINER

Model Number : CHT-LTT-1
Educational Objectives:
Install and configure laptop hardware and components.
Compare and contrast the components within the display of a laptop.
Compare and contrast laptop features.
Given a scenario, use appropriate safety procedures.
Explain environmental impacts and the purpose of environmental controls.
Explain the basic features of mobile operating systems. Compare and contrast methods
for securing mobile devices.
Given a scenario, explain the troubleshooting theory.
Given a scenario, troubleshoot common problems related to common symptoms with
appropriate tools.
Given a scenario, troubleshoot operating system problems with appropriate tools.
Given a scenario, troubleshoot common security issues with appropriate tools and best
practices.
Given a scenario, troubleshoot and repair common laptop issues, while adhering to the
appropriate procedures.
Understanding common Safety instruction for laptops.

SERVER TROUBLESHOOTING TRAINER

Model Number : CHT-STT
CHT-STT-W : Windows Base OS
Educational Objectives:
Experiment with Power Supply, Processor, Bios Setting, Cooling System and Fan
Controller, Optical Disk Drive, Esata, Network Device, Serial Port, Usb ( Universal
Serial Bus), Hard-disk, Vga.
Configuring IP Address, Configure Ldap Using Yast, DNS Server, Samba Server.
Configuring Printer Using Internet Printing Server (ipp) and Document Service.
Managing Users, Group and Permissions, Firewall.
Configuring DHCP Server, Web Server, FTP Server.
Virtual Network Computing (VNC) Remote Administration, Virtualization With Xen,
KVM.
Raid 1 (disk Mirroring), Creating/Restoring A Syste Backup Using Yast.
System Monitoring.
Troubleshooting common problems.

LCD COMPUTER MONITOR TRAINER

Model Number : CHT-CMT-L
The teaching program is designed to follow the service procedures as recommended by
the manufacturer and uses the factory service manual in conjuction with student job
sheets along with a text on servicing and theory. Each trainer comes with complete
courseware as follows: Factory service manual with detailed circuit board schematic
diagram and Student job sheets with fault guide and wiring diagram.
Educational Objectives:
Understanding history computer LCD display.
Knowledge of computer LCD display theory, block, and circuits.
Understanding AC to DC Switching power supply, VGA input circuits.
Understanding differentiate transmitter and receiver circuits.
Understanding of Pixel control, Rows and Columns refreshing, Back lit circuits,
control, and Safety concern.
Troubleshooting common problems.

2
 CHT – COMPUTER HARDWARE TECHNICIAN

LED COMPUTER MONITOR TRAINER

Model Number : CHT-CMT-L2
The teaching program is designed to follow the service procedures as recommended by
the manufacturer and uses the factory service manual in conjuction with student job
sheets along with a text on servicing and theory. Each trainer comes with complete
courseware as follows: Factory service manual with detailed circuit board schematic
diagram and Student job sheets with fault guide and wiring diagram.
Educational Objectives:
Understanding history computer LED display.
Knowledge of computer LED display theory, block, and circuits.
Understanding AC to DC Switching power supply, VGA input circuits.
Understanding differentiate transmitter and receiver circuits.
Understanding of Pixel control, Rows and Columns refreshing, Back lit circuits,
control, and Safety concern.
Troubleshooting common problems.

DISK DRIVE TRAINNER (FLOPPY)

Model Number : CHT-CDT-1
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

DISK DRIVE TRAINNER (HARD DISK)

Model Number : CHT-CDT-3
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

3
 CHT – COMPUTER HARDWARE TECHNICIAN

DISK DRIVE TRAINNER (DVD)

Model Number : CHT-CDT-6
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

DISK DRIVE TRAINER (DVD-RW)

Model Number : CHT-CDT-7
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

DISK DRIVE TRAINER (BLUE-RAY)

Model Number : CHT-CDT-8
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

4
 CHT – COMPUTER HARDWARE TECHNICIAN

DISK DRIVE TRAINER (BLUE-RAY RW)

Model Number : CHT-CDT-9
Educational Objectives:
Familiarization with HDD/optical device used by computer system.
Familiarization disk drive hardware, component and features.
Familiarization disk drive format standard.
Familiarization disk drive burning progress.
Disk drive organization, partition arrangement, file recovery concept.
Understanding disk drive block diagram.
Understanding disk drive fault symptom.
Disk drive troubleshooting the power supply.
Disk drive troubleshooting the loading motor.
Disk drive troubleshooting the slide motor.
Disk drive troubleshooting the spindle motor.
Disk drive troubleshooting the motor driver.
Disk drive troubleshooting the RF amplifer.
Disk drive troubleshooting the interface.

OPTIONAL ACCESSORIES FOR COMPUTER

Model Number : CHT-ACC
Computer service tool kits with 68 pieces in a soft tool case with zipper. Including
precision screw drivers, small needle nose pliers, screw driver with interchangeable
bit for all types including nut drivers (30 bits), wire stripper/crimper, soldering iron,
part grabber, IC puller, IC in sorter, solder sucker, adjustable wrench, brush, solder
assist tools, an-tistaic clip, alignment trimmers.

THE VISIBLE COMPUTER

Model Number : CHT-VCT
Educational Objectives:
Courseware follows general basic Comp TIA A+ program elements
Terms, concepts, and functions of PC component modules.
Identification of basic components and how they operate and relate to
each other.
Identify common peripherals and how they integrate with the computer,
associated cabling and their connectors.
PC Assembly and Configuration.
Identify proper procedures for installing and configuring peripheral
devices.
Identify hardware methods of how computers can be upgraded to
improve system performance.
Software types and review of their usage and applications.
Basic Operating System configuration and usage.
Identify basic common symptoms and problems.
Basic Elements covered

5
CAP – COMPUTER ASSEMBLY AND
PERIPHERALS
 CAP – COMPUTER ASSEMBLY AND PERIPHERALS

COMPUTER SYSTEMS SERVICING TRAINER

Model Number : CAP-CAT-7 Pentium Computer Assembly Kit Trainer
Educational Objectives:
Demonstrate the proper use of computer hardware and software
Explain the characteristics and functions of internal and external storage devices
Identify basic procedures for adding and removing field replaceable computer components.
Explain the characteristics and functions of peripheral devices
Identify common peripheral ports, associated cabling and their connectors.
Understanding PC Assembly and Configuration.
Understanding BIOS Setup and Configuration.
Identify proper procedures for installing and configuring peripheral devices.
Identify hardware methods of upgrading system performance, procedures for replacing basic and
unique subsystem components and when to use them.
Understanding Operational System (O/S) configuration and usage.
Identify common symptoms and problems associated with each module and how to troubleshoot and
isolate the problems.
Recognize safety hazards and identify corresponding guidelines
Identify preventative maintenance products, procedures, and how to use them

LAPTOP FOR ASSEMBLY SKILLS

Model Number : CAP-LST-7
Educational Objectives:
Explain the differences between the various printer types and summarize the associated imaging process.
Recognize printer components and its function: imaging drum, fusser assembly, transfer belt, transfer rollet, pickup rollers, separate pads,
duplexing assembly.
Understanding printing processes : processing, charging, exposing, developing, transfering, fusing and cleaning.
Install and Use appropriate printer drivers for a given operating system.
Operate and set-up Print devices sharing.
Sharing local/networked printer via Operating System settings.
Perform maintenance processes : replacing toner, applying maintenance kit, calibration, cleaning.
Perfom troubleshooting on common faults found in Monochrome Laser Printer.
Understanding Video control, engine Control and Sfety concern.
Understanding typical Laser printer block and circuit.
Understanding of AC to DC power supply.
Learning of Microprocessor control.
Troubleshooting common problems.

6
 CAP – COMPUTER ASSEMBLY AND PERIPHERALS

LASERJET PRINTER TRAINER

Model Number : CAP-CPM-1
Educational Objectives:
Explain the differences between the various printer types and summarize the
associated imaging process.
Recognize printer components and its function: imaging drum, fusser assembly,
transfer belt, transfer rollet, pickup rollers, separate pads, duplexing assembly.
Understanding printing processes : processing, charging, exposing, developing,
transfering, fusing and cleaning.
Install and Use appropriate printer drivers for a given operating system.
Operate and set-up Print devices sharing.
Sharing local/networked printer via Operating System settings.
Perform maintenance processes : replacing toner, applying maintenance kit,
calibration, cleaning.
Perfom troubleshooting on common faults found in Monochrome Laser Printer.
Understanding Video control, engine Control and Sfety concern.
Understanding typical Laser printer block and circuit.
Understanding of AC to DC power supply.
Learning of Microprocessor control.
Troubleshooting common problems.

DOT MATRIX PRINTER TRAINER

Model Number : CAP-CPM-2
Educational Objectives:
Set up the trainer and software installation.
Troubleshoot electronic fault system and test points.
Familiarize theory of Dot Matrix Printer operation.
Learning safety factors when working on Dot Matrix Printers.
Learning disassembly and reassembly of the printer.
Learning printer service specification and DATA.
Learning dot matrix printing process.
Learning routine Maintenance Procedures.
Learning common Servicing Problems.
Learning fault insertion and toubleshooting.
Learning test Points for troubleshooting exercises.
Learning dot Matrix Printer Block Diagram.
Learning dot Matrix Printer Circuit Schematic Diagram.

COLOR INK JET PRINTER TRAINER

Model Number : CAP-CPM-3
Educational Objectives:
Set up the trainer and software installation.
Electronic fault system and test points.
Theory of Ink Jet Printer operation.
Safety factors when working on Ink Jet Printers.
Disassembly and reassembly of the printer.
Printer service specification and DATA.
Ink Jet printing process.
Routine Maintenance Procedures.
Common Servicing Problems.
Fault insertion and troubleshooting.
Test Points for troubleshooting exercises.
Ink Jet Printer Block Diagram.
Ink Jet Printer Circuit Schematic Diagram.

7
 CAP – COMPUTER ASSEMBLY AND PERIPHERALS

COLOR LASERJET PRINTER TRAINER

Model Number : CAP-CPM-4
Educational Objectives:
Explain the differences between the various printer types and summarize the associated imaging
process.
Explain the differences between monochrome and color laser printer system.
Recognize printer components and its function: imaging drum, fusser assembly, transfer belt, transfer
rollet, pickup rollers, separate pads, duplexing assembly.
Understanding printing processes : processing, charging, exposing, developing, transfering, fusing and
cleaning.
Install and Use appropriate printer drivers for a given operating system.
Operate and set-up Print devices sharing.
Sharing local/networked printer via Operating System settings.
Perform maintenance processes : replacing toner, applying maintenance kit, calibration, cleaning.
Perfom troubleshooting on common faults found in Color Laser Printer.

COLOR SCANNER TRAINER

Model Number : CAP-CST-1
Educational Objectives:
Understanding the History and theory of Scanners.
Knowledge of Typical scanner blocks and circuits.
Learning about AC to DC switching power supplies.
Learning about Controller circuits.
Learning about Photo head position sensors.
Learning about CCD sensors.
Learning about Stepping motor circuits.
Learning about DC to DC white LED drivers.
Learning about Computer interfaces.
Learning about Safety concerns.
Troubleshooting common problems.

MULTIFUNCTION PRINTER/SCANNER/FAX/COPIER TRAINER

Model Number : CAP-CST-2
Educational Objectives:
Set up the trainer and software installation.
Electronic fault system and test points.
Theory of Multifuntion Printer/Scanner/Fax/Copier operation.
Safety factors when working on Multifunction Printer/Scanner/ax/Copier.
Replacement cartidge method.
Printer service specification and DATA.
Multifunction/Scanner/Fax/Copier process.
Routine Maintenance Procedures.
Common Servicing Problems.
Fault insertion and troubleshooting.
Test points for troubleshooting exercises.
Multifunction Printer/Scanner/Fax/Copier Block Diagram.
Multifunction Printer/Scanner/Fax/Copier Circuit Schematic Diagram.
OEM Manufacturer service manual.

8
 CAP – COMPUTER ASSEMBLY AND PERIPHERALS

COMPUTER MODEM TRAINER

Model Number : CAP-MDM-1
Educational Objectives:
Familiarization of Computer Modem.
Familiarization of Use Modem Terminal Program.
Troubleshooting the Power Supply Fault.
Troubleshooting the Phone Line Fault.
Troubleshooting the Modem Control Fault.
Troubleshooting the Transmit Data Fault.
Troubleshooting the Receive Data Fault.

LCD PROJECTOR TRAINER

Model Number : CAP-LCD-1
Educational Objectives:
Knowledge about the Basic Operation of LCD Projectors.
Installation about the LCD Projectors.
Operating The LCD Projector.
Troubleshooting the Analog Video Input Fault.
Troubleshooting the Lamp Thermistor Fault.
Troubleshooting the Lamp Ballast Fault.
Troubleshooting the Shutter Switch.
Troubleshooting the Auto Iris.
Troubleshooting the Remote.
Troubleshooting the Power Switch.
Troubleshooting the LED Control.

COMPUTER UPS TRAINER

Model Number : CAP-UPS-1
Educational Objectives:
Familiarization of Computer UPS Trainer.
Troubleshooting the Analog Video Input Fault.
Troubleshooting the Lamp Thermistor Fault.
Troubleshooting the Lamp Ballast Fault.
Troubleshooting the Shutter Switch.
Troubleshooting the Auto Iris.
Troubleshooting the Remote.
Troubleshooting the Power Switch.
Troubleshooting the LED Control.

SWITCHING POWER SUPPLY TRAINER

Model Number : CAP-SPS-1
Educational Objectives:
Familiarization of switching power supply & measuring test points.
Troubleshooting the power +12V Circuit.
Troubleshooting the power -12V Circuit.
Troubleshooting the power +5VSB Circuit.
Troubleshooting the power +5V Circuit.
Troubleshooting the power +3.3V Circuit.
Troubleshooting the PS ON Circuit.
Troubleshooting the power Good Circuit.
Troubleshooting the Opto Isolator Feed Back Circuit.
Troubleshooting the PWM Controller Circuit.
Troubleshooting the Diode Rectifier Circuit.

9
CLP – COMPUTER LAN TECHNICIAN
 CLP – COMPUTER LAN TECHNICIAN

BASIC PC NETWORK SYSTEM TRAINER

Model Number : CLP-PCN-1
Educational Objectivies :
Comparing the advantages, disadvantages and characteristics of the most popular networks.
Demonstrating power techniques for connecting networks using twisted pair cable (10/100-Base T network) and Wireless Technology media.
Install and configure modems and software.
Using modems for filre transfer (send/receive).
Connecting telephone line.
Install and configure typical network and communication software for networking and data transfer.
Setup and configure a “peer to peer” network also a “client/server” network.
Setup and configure an Ethernet Network in star configuration using wired and wireless switches.
Plan layout and configure a network for a specific application.
Install and configure hardware.
Install and configure network interface cards.
Install cable and connectors using proper networking tools.
Install and configure basic network security.

10
 CLP – COMPUTER LAN TECHNICIAN

NETWORK AND CABLING TRAINER

Model Number : CLP-PCN-2
Educational Objectives:
Identify media types and their uses :
a. Twisted Pair (UTP/STP) cable, Category 3, 5e and 6.
b. Coaxial cable, such as: RG-58.
Identify connectors :
a. RJ-45 connector.
b. RJ-11 connector.
c. BNC connector.
Dissect and identity construction of various type of cables.
Identify operation of hand tools and cable tester.
Pull cable through conduit, punch down cable to 110 block, test with
cable tester.
Prepare and test a UTP cable, category 5e with RJ45 connectors.
Prepare and test a UTP cable, category 6 with RJ45 connectors.
Prepare and test a UTP cable, category 3 with RJ45 connectors.
Connect UTP cable to modular outlets and test the connection.
Apply BNC connectors to coaxial cable and test.
To demonstrate configuration of various topologies:
a. Bus topology
b. Star topology
c. Token Ring topology.

LAN SWITCH TRAINER

Model Number : CLP-HST-2
Educational Objectivies :
Familiarization of Connection PC to Local Area Network
(LAN) by using LAN Switch.
Familiarization LAN Switch component.
Understand LAN Switch Power supply.
Troubleshooting LAN Switch Isolation Interface.
Troubleshooting of Transmitting System on LAN Switch
Trainer.
Troubleshooting of Receiving System on LAN Switch Trainer.
Troubleshooting Switching Engine.

11
 CLP – COMPUTER LAN TECHNICIAN

PRACTICAL LAN TRAINER

Model Number : CLP-PLT
Educational Objectivies :
1.Understanding Local Area Network Technology
Understanding the function of common LAN protocols.
Identify commonly used TCP and UDP default ports for LAN.
Identify address formats.
Given a scenario, evaluate the proper use of the folloeing addressing technologies and addressing schemes.
Idintify common Ipv4 and Ipv6 routing protocols.
Compare the characteristics of wireless communication standards.

2. Understanding Network Media and Topologies

Categorize standard cable types and their properties.
Identify common tools and connector types.
Given a scenario, differentiate and implement appropriate wiring standards.
Categorize LAN technology types and properties.
Explain common logical network topologies and their characteristics.
Install components of wiring distribution factor which affect the range and speed of wireless service.
Wireless technologies: Direct sequance spread spectrum, Bluetooth, Frequency hopping spread spectrum.

3. Understanding LAN Device

Install, configure and differentiate between common network devices.
Explain the advanced features of a switch.
Implement a basic wireless network.

4. Understanding LAN Implementation and Management

Explain the function of each layer of the OSI model.
Implement client and server connectivity.
Explain the main characteristics and purpose of extranets and intranets.
Identify types of configuration management documentation.
Given a scenario, evaluate the network based on configuration management documentation.

5. Understanding Network tools and Security for LAN

Select the appropriate command line interface tool.
Explain the purpose of network scanners.
Given a scenario, utilize the appropriate hardware tools.
Explain the funtion of hardware and sofware security devices.
Explain common features of a firewall.
Explain the methods of network access security.

12
 CLP – COMPUTER LAN TECHNICIAN

PRACTICAL WAN TRAINER

Model Number : CLP-PWT
Educational Objectivies :
A) Media & Topologies Learning
logical or physical network topologies.
WAN Network Components.
OSI Architecture.
Services: GHDSL.
WAN Implementation: MPLS, IP Transit, VPN, VLAN.
Networking Traffic Analyzer.
Dynamic Routing.

B) Protocols & Standards Learning

MAC (Media Access Control).
Network protocols:
a. PpoE (Point to Point over ethernet).
b. L2TP (Layer 2 Tunneling Protocol).
c. TCP / IP (Transmission Control Protocol / Internet Protocol).
d. PPP (Point to Point Protocol).
e. SLIP (Serial Line Internet Protocol).
f. HDLC (High-Level Data Link Control) – with Optional Module.
g. VOIP (Voice Over Internet Protocol).
IP Secure Addressing.
The characterisctics of the following internet access technologies.
The function of the following remote access protocols and services.
Security protocols and their purpose and function.
The authentication protocols.

C) Wide Area Network Implementation

Client and Server Connectivity over the WAN.
The main characteristics of VPN (Virtual Private Networks).
The main characteristics and purpose of extranets and inranets.
The purpose and benefits of using traffic Monitoring Sftware.
WAN connection and troubleshooting.

13
 CLP – COMPUTER LAN TECHNICIAN

NETWORK SECURITY TRAINER

Model Number : CLP-NST-1
Educational Objectivies :
A) Network Security
Network Security Policy and Concept.
Element of Computer Network.
Security for the domain concept.
a. Integration.
b. Access Control.
Network Security Protocol and application.
Data Encryption, concepts, types, algorithm.
Web Security Concept.
Wireless LAN security.
Components.
VPN Configuration, Protocols.
Risk Study and evaluation.
Recognizing viruses, trojans, worms.
Firewalls and methods of utilization (both software and hardware)
WPA nad Wi-Fi secutiy.

B) Application and Standard

Characteristics of Hacker attack and worm Method.
Firewall method in the computer system stand alone and networking.
Web Filter system in the computer networking.
Intrusion and detection system.
VPN configuration on Window or Linux Server.
Security protocols and their purpose and function.
The authentication protocols.

14
 CLP – COMPUTER LAN TECHNICIAN

FBC NEW FIBER OPTIC COMMUNICATIONS

Model Number : CLP-FBC
A) Base Station & Fundamentals Module. (CLP-FBC-1)
Fiber Characteristics.
Optoelectronic in Fiber technology:
a. Receiver
b. Transmitter
Fiber Media types: Single-mode (ST), Multi-mode (SC)
Fiber Cable Transmission:
a. Attenuation and Loss.
Understanding Digital and Analog signal transmisson over Fiber Optics cable:
a. Data coder and decoder.
b. Multiplexing and De-multiplexing.
c. Modulation and Demodulation.
Fundamentals of Fiber Optic Transmitters Design.
Fundamentals of Fiber Optic Receiver Design.

B) Fiber Optics Installation and Repair. (CLP-FBC-2)

Splices, Connectors and Terminations.
Fiber Optic cable preparation:
a. Cutting.
b. Polishing.
Connecting Fiber Optic cable.
Attenuation in Fiber Optic cable.

C) Fiber Optics Applications (CLP-FBC-3)

Serial Communication between Pcs over Fiber Optic media.
Model: CLP-FBC-3A.
To order with fault simulation: CLP-FBC-3AF.
Analog Communication over Fiber Optic media.
Model: CLP-FBC-3B.
To order with fault simulation: CLP-FBC-3BF.
PC Network data communication over Fiber Media Kit.
Model: CLP-FBC-3C.
Consists of:
a. Fiber Optic Network Card, 1 port (2 Pcs).
b. Fiber Optic Cable 6 m length (1 pair).
c. Fiber Optic Loop Back Cable (1 Pc).
The Kit is design for testing and using fiber optic network cards, cables and connectors
in PC Network Configuration.

15
CPA – DATA ACQUISITION SYSTEM & CONTROL
 CPA – DATA ACQUISITION SYSTEM & CONTROL

SIGNAL CONDITIONING TRAINER FOR DATA

ACQUISITION
Model Number : CPA-SCT-1
Educational Objectives:
Study of Analog Signal Conditioning Module
Study of Digital Signal Conditioning Module
Study of Analog to Digital Converter
Study of Digital to Analog Converter

SENSOR AND TRANSDUCER TRAINER

Model Number : CPA-STT
Educational Objectives:
Specific application modules allow for experiments in such areas as temperature
and humidity, light, proximity, strain, pressure, flow, etc.
Study of electrical/electronic engineering, chemical engineering, process control,
physics and mechanical engineering.
Study of Temperature and Humidity.
Study of Proximity Sensor.
Study of Load Cells and Strain Gauge.
Study of Pressure Measurement.
Study of Photo Electric Sensors.
Study of Level Sensor.
Study of Position and Displacement.
Study of Flow.
Study of Sound Sensor.
Study of Switches and Control.

DATA ACQUISITION AND CONTROL

TRAINER
Model Number : CPA-DAQ
Educational Objectives:
Study of sensors and transducers, signal conditioning, Visual basic
programming, application development, system integration.
Knowledge Basic signal conditioning is explored through a very visible
system on modular application PCBs that are inserted into the base
station.
The signal may be acquired by either a Serial based data acquisition
system through the RS-232 port or through an 8 or 16 channel Data
Acquisition PC Card.
The system explores both open loop and closed loop applications.

ELECTRONIC WASHING MACHINE TRAINER

Model Number : CPA-WMT
Educational Objectives:
Training service technicians about maintenance, trouble shooting and repair of
washing machines.
This trainer can combines a number of electrical, electronic and mechanical
systems into a complex process.
Electronic technicians can demonstrate a typical process control system which
includes Flow, Temperature, Level and Speed control.
Fault system which includes the block system diagram, LED display and 12
electronic faults, for the control system, valves, pump, motor, sensors, etc.
The student can control the process, actuators, solenoid valves, heater, pump
motor, etc.

16
CMM – MICROCOMPUTER & MICROPROCESSOR
 CMM – MICROCOMPUTER & MICROPROCESSOR

ADVANCE DIGITAL APPLICATION MODULES

Model Number : EFT-DTX
Educational Objectives:
Each application circuit module is printed on a special design PCB that shows the circuit layout on top of the PCB (component side) and the
circuit path is able to be observed from the bottom side of the PCB (solder side).
Study of electronic instrument measurements in order to understand and to study the circuit electrical characteristics and behavior.
Study of Arithmetic Logic Unit.
Study of Encoder and Decoder Application.
Study of Data Transmission and Digital Switching Network System.
Study of Frequency to Voltage and Voltage to Frequency Converter.
Study of Usart.
Study of Analog to Digital Converter and Digital to Analog Converter.
Study of Computer Fundamentals Training.
Study of Breadboard.

8085 MICROPROCESSOR TRAINER

MODEL NUMBER : CMM 8085
Educational Objectives:
CMM-8085 operates with SINGLE 5V power supply either from on board keyboard
or from CRT terminal/host computer through RS-232- C interface.
In both keyboard and serial modes, user can enter programs, run them at full
speed and debug them through break point and single step facilities.
The trainer allows program editing and relocation through INSERT, DELETE and
BLOCK MOVE commands.
The system allows direct read / write from / to a specified I/O port though IN BYTE
and OUT BYTE commands.
It has four onboard Spectra Strip type ribbon cable connectors for easy expansion
and two user defined function keys.
Onboard battery backup provision.
It supports many types of interfaces On board Text Editor, Assembler and
Dissembler facilities in serial mode.

8088 MICROPROCESSOR TRAINER

Model Number : CMM 8088
Educational Objectives:
Works with either 8086 or 8088 CPU
Operates with on-board keypad or with a PC compatible system through its RS 232
C interface.
Provision for on-board 8087 (NDP).
Powerful system monitor permits entry of programs, debugging through break
point and instruction step facilities.
Built-in one line assembler / disassembler. Centronics Printer Driver included in the
monitor program.
Provision for easy system expansion through system bus connectors.
Provision for battery backup to RAM.
Supported by a variety of interface modules including EPROM PROGRAMMER.

17
 CMM – MICROCOMPUTER & MICROPROCESSOR

6811 MOTOROLLA MICROPROCESSOR

TRAINER
Model Number : CMM-6811
Educational Objectives:
Socketed 52-pin 6811 Motorola microcontroller, system clock at 2 Mhz
32K battery-backed CMOS static RAM
Digital input latch
Digital output latch driving two L293 chips capable of driving 4 DC motors
14-pin LCD interface and a 16 X 2 character LCD screen
Two user programmable push buttons, one knob, one piezo beeper
Powered header inputs for 7 analog sensors and 9 digital sensors.
Powered/polarized individual sensor connectors
38 kHz oscillator and drive transistor for IR output and on-board 38 Khz IR
receiver.
One servo motor output and serial peripheral interface
Single 9.6 V nicad battery powers CPU and motors recharge, circuitry for
the battery built into the board; battery fits into commercial enclosure
sized to fit the HB.
7 of the 8 analog inputs broken out to sensor headers; eighth is wired to a
user trimpot (can be used to scroll through messages on the LCD screen).
On-board IR receiver interprets signals from house hold remotes or other
robots
Separate serial interface board uses off-the-shelf serial, and recharges the
HB's battery whenever it's plugged in.

MOTOROLLA 68000
Model Number : CMM-68000
Educational Objectives:
68000 CPU with 8 MHz Clock
16 Bit Microprocessor
68230 Parallel Interface/Timer :
- 16 I/O Lines
- 8 User Defined Lines
- 24 Bit Counter/Timer
68681 DUAL UART :
- 2 RS232 Ports via DB 9-way
- 6 Output Lines
- 4 Input Lines
Operates on single +5v power supply with a PC compatible system through
its RS 232 C serial communication interface.
Powerful system monitor permits entry of programs, debugging through
break point, trace and instruction step facilities.
Hardware debugging through Read loop, Write loop and Test memory
command.
Centronics printer Driver included in the monitor program.
Interfacing with PC compatibles, with file uploads / download capability.
ABORT facility to recover gracefully from “STUCK” programs.
Flexible and powerful interrupt system.
Supported by a variety of interface modules
Built-in On-line Assembler, Disassembler.
Trainer has on board memory of 128K bytes of monitor firmware, 64K of
RAM, expandable up to 256K bytes of optional ROM / RAM.
On board serial printer interface.
ABORT facility to recover gracefully from "STUCK" program.
Flexible and Powerful Interrupt system.
On board European standard G64 Bus interface.
Provision for multi-master design expansion.
Provision for Nickel cadmium battery for battery back-up of RAM.
Student Manual with Programming Exercises
Supported by variety of Interface Modules.

18
 CMM – MICROCOMPUTER & MICROPROCESSOR

MICROCONTROLLER TRAINER
Model Number : CMM-8051
Educational Objectives:
CMM-8051 can be operated either from on board keypad or from a CRT
terminal/host computer through its RS-232-C interface.
Keyboard and serial monitor programs support the entry of user programs,
editing and debugging facilities like break points (128K), single stepping and full
speed execution of user programs.
Line Assembler & Disassambler in Serial Mode.
File upload/download from host system using optional driver software.
On board audio cassette interface to save and load programs using audio
cassette recorder.
Total on board memory is 128K bytes of which 88K bytes memory has optional
battery backup facility.
On board Centronics Parallel Printer Interface.
13 uncommitted port lines of 8031 brought out to the connector ( including
INTI, RXD & TXD pins).
Buffered bus signals are available through ribbon cable connector to easy
system expansion.
Test point for system timing, oscillator, read, write, ALE and PSEN.

PAL/GAL PROGRAMMER TRAINER

Model Number : CMM-PLD
Educational Objectives:
The Programmer is a universal device programmer, which works through the PC's
parallel port.
It features a 48-pin universal pin driver and an expandable TTL pin driver.
It supports over 1200 different devices, including PAL, GAL, CPAL, EPLD, PEEL, MAX,
MACH, PLSI, microprocessors, EPROM, series EPROM, PROM and Flash memory.
Optional ROM emulator modules support devices up to 16-bits.

PROGRAMMER
Model Number : CMM-PIC-1
Educational Objectives:
The CMM-PIC-1 is designed as a tool to allow Students and developers to program
PIC Microcontroller’s.
The CMM-PIC-1 comes complete with the development programming board and
Programming Software.
The PIC programmer is used for downloading a specific program for controlling the
experiment modules such as, temperature control, speed control and traffic light
control.
This CMM-PIC-1 uses USB/Serial port connection.
The programming software for PC’s, works under Windows NT/2000/XP/7.

ANALOG COMPUTING TRAINER

Model Number : CMM-ACT
Educational Objectives:
Introduction to Analog Computing
Operational Amplifier as Amplifier
Operational Amplifier as Attenuator
Operational Amplifier as Differentiator
Operational Amplifier as Integrator
Linear Equations
1st Order Differential Equations
2nd Order Differential Equation
Positive and Negative Damping Effects
2nd Order System Frequency Response
Simulation of physical system and transfer function

19
 CMM – MICROCOMPUTER & MICROPROCESSOR

MOD ACC INTERFACE MICROPROCESSOR

Model Number : CMM-INT
Educational Objectives:
Familiarization of Elevator Interface
Familiarization of Trafic Lights Interface
Familiarization of Stepper Motor Interface
Familiarization of 4 Digit, 7 Segment LED Display Interface
Familiarization of DAC For ADC and Temperature Sensor Interface
Familiarization of Dual DAC Interface
Familiarization of 8 Channel 12-BIT ADC Interface
Familiarization of Keyboard Module
Familiarization of 16 Channel 8-BIT ADC Interface
Familiarization of Logic Controller Interface
Familiarization of Music Tone Generator Interface
Familiarization of Opto Isolated Input
Familiarization of Relay Output
Familiarization of Dual Slope ADC Interface

20
 Labtech Product Areas :
Air Conditioning and Refrigeration Technology
Automotive and Transportation Technology
Biomedical Technology
Computer & Networks Technology
Labtech Training Systems are used in over 75 Digital TVET Content for Virtual Learning
countries world wide and indicated in blue on this Electrical Technology
map. Electronics Technology
We also have 6 regional operational locations Learning Management Systems / Classroom21 CMS
marked with a flag . Renewable Energy and Green Tech
TVET Learning Management System

Labtech has obtained major Quality Certifications from TUV Rheinland, Germany:
ISO 9001:2015 Quality Management System

9001 Certification Categories: Research, Assessment, Design and Development of Educational Training Systems,
Programs and Products. Manufacturing of Educational Training Systems and Products to International Standards
which includes the processes of: Production, Manufacturing Resource Planning (MRP), Quality Control and
Assurance (QC/QA), International Sales & Marketing, Project Implementation and Consulting Services, Training
Programs and Customer Services.

Batam Office (Main Factory): Malaysia (Regional Marketing Center)

PT. LABTECH PENTA INTERNATIONAL E-mail: [email protected]
Kawasan Industri Sekupang Kav. 34, Sekupang,
Jordan (Middle East Regional Support Center)
P.O. box 120 Sekupang, Batam - Indonesia 29428
E-mail: [email protected]
Tel: (62-778) 327781, 327782,321057, 321330
Fax: (62-778) 321414 E-mail: [email protected]
India Office
E-mail: [email protected]
Singapore (Finance/ Logistics)
E-mail: [email protected] USA Office
E-mail: [email protected]

Indonesia (Marketing Office) UK Office

E-mail: [email protected] E-mail: [email protected]