No 3 Configuration of The Core Interface
No 3 Configuration of The Core Interface
Set up the CIF customizing by choosing Basic Settings for Creating the System Landscape. Create a
RFC Destination and Logical System including the SAP S/4HANA itself (own system and client), so
that the data can be integrated to embedded PP/DS and a logical system and queue types can be
maintained.
There is no need for maintaining distribution definition or publication types as the PP/DS is part of
SAP S/4HANA. However, please take the following SAP Note into account:
2872226 - Advanced PPDS: Settings from transaction /SAPAPO/CP3 are still considered by the
system for in-house production
1.2 Create RFC Destination for the relevant client (client dependent)
An RFC Destination for the transfer of master and transaction data between S/4 and embedded
PP/DS is required. The RFC Destination points to the respective system and client of the S/4HANA
system itself.
On the liveCache installation a RFC Destination for the clients should already be created. Start
transaction SM59 and check the existing RFC Destinations for the relevant client. If there is no
suitable RFC Destination, you have to create one.
Procedure
2. Choose Create.
3. Add a CLNT string and the client number (for example, "678") to your system ID (for example,
"XYZ") to determine the connection name.
Note: This constitutes the connection name (for example, "XYZCLNT678"). You must adhere to
this naming convention as ABAP does not recognize other names, for example, "XYZMAND678",
and causes errors. If there is already a connection with the same destination but a different name,
you must still create the connection as described. ".
5. As a connection type, choose "3" (= SAP S/4HANA backend system destination or connection to
the ABAP system).
Procedure
Access the activity using one of the following navigation options:
Assign logical System to the S/4HANA client for the data integration.
Procedure
Access the activity using one of the following navigation options:
Currency USD
Client Copy and Comparison Tool Select the entry according to your IT policy
Protection
eCATT and CATT Not Allowed Select the entry according to your IT policy
Procedure
Access the activity using one of the following navigation options:
Procedure
Access the activity using one of the following navigation options:
Assign Logical System and define the queue type to the business system group and the client.
Procedure
Access the activity using one of the following navigation options:
IMG Menu IMG → Advanced Planning → Basic Settings → Integration via Core
Interface (CIF) → Integration → Basic Settings for Creating the
System Landscape → Assign Logical System and Queue Type
BusSystGrp BSG or the defined value for the Business System Group
Release 700
Set the logical system as target system and define the queue type.
Procedure
Access the activity using one of the following navigation options:
Q-Type I
The Operation Mode is set automatically to T. If the operation mode is not set automatically, the note
2634408 PP/DS : Setting OPMODE in CFC1 to 'T' standard has to be implemented. After the
implementation delete the entry and enter it again. Then the operation mode should be set
automatically to T.
Procedure
Access the activity using one of the following navigation options:
Logical System Enter the logical System defined in the steps before.
System Type SAP_APO (Please be aware the available content of this particular
field can vary by release)
Release 713
Set the application indicator for ND-APO (New Dimension Plug-In APO) and NDI (New Dimension
Integration) to active. Without this activation the integration will not work.
Procedure
Access the activity using one of the following navigation options:
Procedure
Access the activity using one of the following navigation options:
Select “Registration”:
Field name User action and values
Mode D
Destination Blank
Attempts Blank
Pause 300
Maintain the user-specific settings for generating, debugging and logging of the CIF queues.
Procedure
Access the activity using one of the following navigation options:
User Name *
Field name User action and values
RFC Mode Q
Logging X
Debug Blank
https://launchpad.support.sap.com/#/notes/2983537
2983537 - S/4 HANA: Overview Redesign "New Order Publishing"
functionality (Order Integration from PP/DS to S/4)