Easergy Builder_1.7.30.

0_ReleaseNotes
Version 1.7.30.0, Public Document

Internal
General Index.
1. Introduction ...................................................................................................................................... 7
2. General Information ......................................................................................................................... 8
2.1 Installing software ......................................................................................................................... 8
3. Release notes ................................................................................................................................... 9
3.1 Release Summary .......................................................................................................................... 9
Easergy Builder_1.7.30.0 ...................................................................................................................... 11
Easergy Builder ...................................................................................................................... 11
Easergy Builder_1.7.29.0 ...................................................................................................................... 12
Easergy Builder ...................................................................................................................... 12
Easergy Builder_1.7.28.0 ...................................................................................................................... 13
Easergy Builder ...................................................................................................................... 13
Easergy Builder_1.7.27.0 ...................................................................................................................... 14
Easergy Builder ...................................................................................................................... 14
Easergy Builder_1.7.26.0 ...................................................................................................................... 15
Easergy Builder ...................................................................................................................... 15
Easergy Builder_1.7.25.0 ...................................................................................................................... 16
Easergy Builder ...................................................................................................................... 16
Easergy Builder_1.7.24.0 ...................................................................................................................... 18
Easergy Builder ...................................................................................................................... 18
Easergy Builder_1.7.23.0 ...................................................................................................................... 19
Easergy Builder ...................................................................................................................... 19
IEC101_Slave ........................................................................................................................... 20
Easergy Builder_1.7.22.0 ...................................................................................................................... 21
Easergy Builder ...................................................................................................................... 21
IEC101_Slave ........................................................................................................................... 22
Easergy Builder_1.7.21.0 ...................................................................................................................... 23
Easergy Builder ...................................................................................................................... 23
IEC101_Slave ........................................................................................................................... 24
Easergy Builder_1.7.20.0 ...................................................................................................................... 25
Easergy Builder ...................................................................................................................... 25
IEC61850 ................................................................................................................................... 26
Easergy Builder_1.7.19.1 ...................................................................................................................... 27
Easergy Builder ...................................................................................................................... 27

2
Internal
 IEC61850 ................................................................................................................................... 28
Easergy Builder_1.7.19.0 ...................................................................................................................... 29
Easergy Builder ...................................................................................................................... 29
IEC61850 ................................................................................................................................... 30
Easergy Builder_1.7.18.1 ...................................................................................................................... 31
IEC104_Slave ........................................................................................................................... 31
Easergy Builder_1.7.18.0 ...................................................................................................................... 32
Easergy Builder ...................................................................................................................... 32
MDBS ......................................................................................................................................... 33
SpaBusM .................................................................................................................................. 33
WebUI ........................................................................................................................................ 33
IEC104S..................................................................................................................................... 34
IEC101S..................................................................................................................................... 34
Easergy Builder_1.7.17.2 ...................................................................................................................... 35
Easergy Builder ...................................................................................................................... 35
ATS............................................................................................................................................. 37
cilo .............................................................................................................................................. 37
IEC103M .................................................................................................................................... 38
IEC104M .................................................................................................................................... 38
IEC104S..................................................................................................................................... 38
IEC61850 ................................................................................................................................... 39
MDBM ........................................................................................................................................ 39
MDBS ......................................................................................................................................... 40
MICOM ....................................................................................................................................... 40
SEPAM ...................................................................................................................................... 40
SNMPM ...................................................................................................................................... 41
SOE ............................................................................................................................................ 41
SpaBusM .................................................................................................................................. 41
webUI ......................................................................................................................................... 42
Easergy Builder_1.7.9.4 ........................................................................................................................ 45
webUI ......................................................................................................................................... 45
Easergy Builder_1.7.9.3 ........................................................................................................................ 47
IEC101_Slave ........................................................................................................................... 47
Easergy Builder_1.7.9.2 ........................................................................................................................ 49

3
Internal
 webUI ......................................................................................................................................... 49
Easergy Builder_1.7.9.1 ........................................................................................................................ 51
IEC101S..................................................................................................................................... 51
IEC104S..................................................................................................................................... 52
webUI ......................................................................................................................................... 52
Easergy Builder_1.7.9.0 ........................................................................................................................ 52
Easergy Builder ...................................................................................................................... 53
IEC61850 ................................................................................................................................... 54
DNPM ......................................................................................................................................... 54
IEC104S..................................................................................................................................... 55
SpaBusM .................................................................................................................................. 55
HST ............................................................................................................................................. 55
webUI ......................................................................................................................................... 56
Easergy Builder_1.7.8.0 ........................................................................................................................ 57
Easergy Builder ...................................................................................................................... 57
DNPM ......................................................................................................................................... 58
CLAQ ......................................................................................................................................... 58
DNPS.......................................................................................................................................... 59
IEC101S..................................................................................................................................... 59
IEC103M .................................................................................................................................... 59
IEC104M .................................................................................................................................... 59
IEC104S..................................................................................................................................... 60
IEC61850 ................................................................................................................................... 60
ISAGRAF................................................................................................................................... 61
ISAGRAF5 ................................................................................................................................ 61
LAQ ............................................................................................................................................ 61
MDBM ........................................................................................................................................ 61
MDBS ......................................................................................................................................... 62
SEPAM ...................................................................................................................................... 62
SOE ............................................................................................................................................ 62
SpaBusM .................................................................................................................................. 62
ATS............................................................................................................................................. 63
ESD ............................................................................................................................................ 63

4
Internal
 HST ............................................................................................................................................. 63
webUI ......................................................................................................................................... 64
TSV ............................................................................................................................................. 64
MICOM ....................................................................................................................................... 64
Easergy Builder_1.7.7.0 ........................................................................................................................ 65
Easergy Builder ...................................................................................................................... 65
IEC104_Slave ........................................................................................................................... 66
IEC101_Master ........................................................................................................................ 66
IEC103_Master ........................................................................................................................ 67
HST ............................................................................................................................................. 67
TSV ............................................................................................................................................. 67
ESD ............................................................................................................................................ 68
CLAQ ......................................................................................................................................... 68
webUI ......................................................................................................................................... 68
IEC61850 ................................................................................................................................... 69
Easergy Builder_1.7.6.0 ........................................................................................................................ 70
Easergy Builder ...................................................................................................................... 70
IEC104_Slave ........................................................................................................................... 71
webUI ......................................................................................................................................... 71
IEC61850 ................................................................................................................................... 72
Easergy Builder_1.7.5.0 ........................................................................................................................ 72
Easergy Builder ...................................................................................................................... 73
webUI ......................................................................................................................................... 73
IEC61850 ................................................................................................................................... 74
ESD ............................................................................................................................................ 76
HST ............................................................................................................................................. 76
IEC101 Slave ............................................................................................................................ 76
IEC104 Slave ............................................................................................................................ 77
Lioc ............................................................................................................................................ 77
ATS............................................................................................................................................. 77
Easergy Builder_1.7.4.0 ........................................................................................................................ 78
Easergy Builder ...................................................................................................................... 79
IEC104_Slave ........................................................................................................................... 79
IEC101_Slave ........................................................................................................................... 80

5
Internal
 ATS............................................................................................................................................. 80
DNP_Slave................................................................................................................................ 81
DNP_Master ............................................................................................................................. 81
SNMP_Master .......................................................................................................................... 82
Easergy Builder_1.7.3.0 ........................................................................................................................ 82
Easergy Builder ...................................................................................................................... 83
CLAQ ......................................................................................................................................... 83
DNP_Master ............................................................................................................................. 84
DNP_Slave................................................................................................................................ 85
IEC101_Slave ........................................................................................................................... 85
IEC104_Slave ........................................................................................................................... 86
IEC61850 ................................................................................................................................... 87
LAQ ............................................................................................................................................ 90
ModBus_Master ...................................................................................................................... 90
ModBus_Slave ........................................................................................................................ 91
HST ............................................................................................................................................. 91
Easergy Builder_1.7.2.0 ........................................................................................................................ 91
Easergy Builder ...................................................................................................................... 92
IEC101S..................................................................................................................................... 92
Easergy Builder_1.7.1.0 ........................................................................................................................ 93
Easergy Builder ...................................................................................................................... 94
SNMPM ...................................................................................................................................... 94
SEPAM ...................................................................................................................................... 94
ESD ............................................................................................................................................ 95

6
Internal
1. Introduction
This document describes features or corrections that have been added to Easergy
Builder_1.7.30.0.
Symbols on the left of each revision are used to define the different types of revisions made:

 This symbol identifies that there is new information such as

compatibility, compilation dates, etc.

 This symbol indicates that there are new upgrades or new

functionalities.

 This symbol indicates that there are bugs or errors that have been
corrected.

 This symbol identifies known problems that have not been

corrected on the last release.

 This symbol identifies a brief reference to a compilation tool.

According to this document’s organization, the information on the last release is shown at the
beginning of the document.

7
Internal
2. General Information
In this chapter, the load structure and folders for the executable files.

2.1 Installing software

To install run the setup.exe file and run it as administrator.

8
Internal
3. Release notes
3.1 Release Summary
A brief description of every release is given.

Version Brief release description

Easergy Builder_1.7.30.0 Bug fixing
Easergy Builder_1.7.29.0 New DP and DR profiles for supporting IsaGRAF
vulnerability management
Easergy Builder_1.7.28.0 Remove USB ports hardening in T300 2.9
Easergy Builder_1.7.27.0 Updated Manual
Easergy Builder_1.7.26.0 Updated T300 2.9 profiles
Easergy Builder_1.7.25.0 T300 2.8.2NW Bug fixing and T300 2.9 profiles
Easergy Builder_1.7.24.0 Bug fixing
Easergy Builder_1.7.23.0 IEC101S Bug fixing
Easergy Builder_1.7.22.0 CEMIG
Easergy Builder_1.7.21.0 CEMIG
Easergy Builder_1.7.20.0 IEC61850 bug fixing. Signature
Easergy Builder_1.7.19.1 IEC61850 bug fixing.
Easergy Builder_1.7.19.0 Core bug fixing.
Easergy Builder_1.7.18.1 IEC104S bug fixing.
Easergy Builder_1.7.18.0 Updated documentation and bug fixing.
Easergy Builder_1.7.17.2 T300 2.8.1 and bug fixing.
Easergy Builder_1.7.9.4 Reverted webUI version to the last validated one and
removed SpaBus
Easergy Builder_1.7.9.3 New functionality and bugs fixing.

Easergy Builder_1.7.9.2 New functionality and bugs fixing.

Easergy Builder_1.7.9.1 New functionality and bugs fixing.

Easergy Builder_1.7.9.0 New functionality and bugs fixing.

Easergy Builder_1.7.8.0 New functionality and bugs fixing.

9
Internal
Version Brief release description

Easergy Builder_1.7.7.0 New functionality and bugs fixing.

Easergy Builder_1.7.6.0 New functionality and bugs fixing.

Easergy Builder_1.7.5.0 New functionality and bugs fixing.

Easergy Builder_1.7.4.0 New functionality and bugs fixing.

Easergy Builder_1.7.3.0 New functionality and bugs fixing.

Easergy Builder_1.7.2.0 New functionality and bugs fixing.

Easergy Builder_1.7.1.0 New functionality and bugs fixing.

10
Internal
Easergy Builder_1.7.30.0

Easergy Builder_1.7.30.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.30
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-233] Remove PLC_ENABLE_A and PLC_ENABLE_B from DP & DR profiles

11
Internal
Easergy Builder_1.7.29.0

Easergy Builder_1.7.29.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.29
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-232] New DP and DR profiles for supporting IsaGRAF vulnerability management.

 Updated SSH library

12
Internal
Easergy Builder_1.7.28.0

Easergy Builder_1.7.28.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.28
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [TANR-6297] Remove USB ports hardening in T300 2.9

13
Internal
Easergy Builder_1.7.27.0

Easergy Builder_1.7.27.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.27
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 Updated Manual documents:

Easergy Builder - User Manual_EN_4.1.pdf
Easergy T300 Devices_EN_4.0.pdf

14
Internal
Easergy Builder_1.7.26.0

Easergy Builder_1.7.26.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.26
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 Updated T300 2.9 profiles with supervision signals: MEM_CAPACITY and MEM_HEALTH

15
Internal
Easergy Builder_1.7.25.0

Easergy Builder_1.7.25.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.25
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-207]:
selected.
T300 2.8.2NW. Fix EB to disable 4G and Zigbee when no wireless option is

Included profiles:
- T300 v02.09+ (TLS en canales TCP, SNMPa, señal PLC_ENABLE)
- T300 v02.09+(HU250-CN)

16
Internal
T300 v02.09+ without Wireless

17
Internal
Easergy Builder_1.7.24.0

Easergy Builder_1.7.24.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.24
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-206]: Easergy Builder 1.7.23 does not show plugins installation option

18
Internal
Easergy Builder_1.7.23.0

Easergy Builder_1.7.23.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.23
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.03
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 New profile:
T300 v02.08.02 without Wireless

19
Internal
IEC101_Slave

 [EABU-136]
fails
IEC101S: When loading a .tar.gz generated with T300G, configuration load

20
Internal
Easergy Builder_1.7.22.0

Easergy Builder_1.7.22.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.22
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.02
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 New- profiles:
Saitel DP-SM_CPU866e v11.06.29+
- Saitel DR-HUe V11.06.23+
Those new profiles provide the functionality for configuration of the new IEC101 parameter
SEND_EVENTS_AS_CLASS2 in Analog monitor points.

21
Internal
IEC101_Slave

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

 Compatible with Easergy Builder v01.07.0X. Compiled with symbol CORE_1_7_1

 [EABU-201] The attribute MFT_MSP_SIZE_IOA2 was not loaded
 [EABU-202] The attribute SEND_EVENTS_AS_CLASS2 was not loaded
 [EABU-203] Error when unselect "Use class 2" for MMEC points
 [EABU-204] SEND_EVENTS_AS_CLASS2 must not be available in T300 configurations.
Included new RTU profile parameter “ that allows the configuration
SEND_EVENTS_AS_CLASS2”
of this parameter.

22
Internal
Easergy Builder_1.7.21.0

Easergy Builder_1.7.21.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.21
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.01
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-200] Deutsch language is showed as “English” in the Language menu of Easergy

Builder, so “English” is repeated.

 [EABU-199] Improved installation speed disabling the creation of a restore point on each
plugin installation.

23
Internal
IEC101_Slave

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

 Compatible with Easergy Builder v01.07.0X. Compiled with symbol CORE_1_7_1

 [DAS-1118] EB 101 adaptation for CEMIG
 [EABU-201] SGCC profile: new configuration parameter to adapt the format of Fault Event
Information to EPC

24
Internal
Easergy Builder_1.7.20.0

Easergy Builder_1.7.20.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.20
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.00
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.24
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-191] Deleted manually created points when adding a new Device

 [EABU-196] Crash with double click in the RTU tree

25
Internal
 [EABU-198] Allow 8 remote IPs of TCP channels
 Easergy Builder will only allow to install plugin signed by Schneider Electric. Also,
Easergy Builder core and setup will be signed by SE so we fix the vulnerability:
ID08031-Easergy Builder-Uncontrolled Search Path Vulnerability
And also problems with CyberARK

 [EABU-195] Updated T300, 866e and DR profiles including a new parameter in

IEC61850 plugin for disabling the “Send status requests” by default.
<CONTROLLER NAME="i61sc" DESC="(X) IEC 61850" >
<PARAM NAME="NOSENDSTATUSREQUESTS" VALUE="Y" /> <!--//EABU-
195-->
</CONTROLLER>

IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-163] Spelling mistake in IEC 61850 Confirmation window

 [EABU-195]
profile
Implemented management of “Send status requests” parameter with a RTU

26
Internal
Easergy Builder_1.7.19.1

Easergy Builder_1.7.19.1
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.19
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.00
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.23
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-166] Fail when saving TAR.GZ with SNMP Agent configuration

 [EABU-183] Easergy Builder breaks when a configuration is created in a directory with a
too large name

27
Internal
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-180] Coordinates from LDevice defined with inst are marked as invalid a coreDB
point which is not.

28
Internal
Easergy Builder_1.7.19.0

Easergy Builder_1.7.19.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.19
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.00
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.21
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-166] Fail when saving TAR.GZ with SNMP Agent configuration

 [EABU-183] Easergy Builder breaks when a configuration is created in a directory with a
too large name

29
Internal
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-174] default value for the Disturbance Record path should change

30
Internal
Easergy Builder_1.7.18.1

Easergy Builder_1.7.18.1
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.18
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.00
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.14
IEC61850_SPlugin.msi IEC61850_01.02.20
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

IEC104_Slave

 [EABU-184]
elements
Error loading xml without attribute EVENTMODE in analog SEC_POINT

31
Internal
Easergy Builder_1.7.18.0

Easergy Builder_1.7.18.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.18
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.06.00
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.13
IEC61850_SPlugin.msi IEC61850_01.02.20
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.01
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.05
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.22
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-168]
Excel
HUe configurations with webUI are not exporting the webUI information to

 [EABU-166] Fail when saving TAR.GZ with SNMP Agent configuration

32
Internal
 [EABU-177] SNMP - Redundant CPU cannot have user with less than 8 characters
 [EABU-179] Indication of invalid .tar.gz
 [EABU-158] Update Embedded documentation in Easergy Builder Tool
MDBS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
•

 [EABU-165] DIAG:COMMAND coordinate is not allowed for STD profile.

SpaBusM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-175] coreDb does not alert about mapped points in coreDb which do not exist in
the SPA-Bus profile

 [EABU-176] Description of SPA-Bus parameters need to be checked

WebUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-172] Hiding/making visible screens without selecting them gives errors

33
Internal
IEC104S

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-178]
loaded
The configuration of EVENTMODE parameter for Analog Points is not being

IEC101S

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-156] Management of IEC101 slave channels redundancy

34
Internal
Easergy Builder_1.7.17.2

Easergy Builder_1.7.17.2
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.17
ATS_SPlugin.msi ATS_01.00.17
cilo_SPlugin.msi Cilo_01.02.00
CLAQ_SPlugin.msi CLAQ_01.01.13
CMON_SPlugin.msi CMON_01.00.18
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.08
IEC103_Master_SPlugin.msi IEC103M_01.01.00
IEC104_Master_SPlugin.msi IEC104M_01.03.00
IEC104_Slave_SPlugin.msi IEC104S_01.05.12
IEC61850_SPlugin.msi IEC61850_01.02.20
IsaGRAF.msi ISAGRAF_01.00.03
Host
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.03.00
Lioc_SPlugin.msi Lioc_01.01.11
MICOM_SPLugin.msi MICOM_01.01.01
ModBus_Master_SPlugin.msi MDBM_01.02.03
ModBus_Slave_SPlugin.msi MDBS_01.02.00
SEPAM_SPlugin.msi SEPAM_01.02.00
SNMPM_SPlugin.msi SNMPM_01.00.10
SOE_SPlugin.msi SOE_01.02.00
SPABUS_SPlugin.msi SpaBusM_01.00.04
TSV_SPlugin.msi TSV_01.00.06
webUI_SPlugin.msi webUI_01.02.20
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09

Easergy Builder

 [EABU-162] 866e: invalid description in network supervision signals

 [EABU-161] Error when opening projects created with previous versions. Issue introduced
fixing [EABU-155]

35
Internal
 [EABU-160] WebUI Warning message when opening a configuration
 [EABU-156] In RTU profile: Saitel DP-SM_CPU866e v11.06.24, Included the new
parameter “Redundancy” for controller IEC101 Slave to support the new IEC101 Slave
redundancy that will be released in that Release.

 [EABU-155] It is possible to get the error message “Configuration modified by other tool.
Please go to workspace and open the configuration again” after sending the configuration
and try to send it again without changes.

 [EABU-120] Compiled for "Any CPU" and setting "Force 32 bits". With this option the
limitation of Ram passes from 1.2Gb to 3Gb.

 [EABU-119] CWE-427. Uncontrolled Search Path Element.

 EABU-70] crash when add PRP in HUe and try to add HSR too.
 [EABU-4] EB 1.7.10. Fixed 3 "String" messages that appear in log console:
After checking
After exporting to excel
After importing from excel

 [EABU-17]
can be use.
Allow special chars in HU_BI users password. Some extended ascii characters

 [EABU-111] Unsupported baud rate 56000 for HUe in COMs and 485
 [EABU-113] webUI creates a wrong coordinate.
 [EABU-119] CWE-427. Uncontrolled Search Path Element.
 [EABU-125] webUI configuration not imported when read a RTU with webUI configuration
 [EABU-123] Error in ATS bin
 [EABU-98] Included new profile parameter in controller snmpm for managing if IPv6 is
available or not.

 [EABU-139] New profile T300 2.8.1

 [EABU-139] New supervision point for T300 2.8.1: MEM_USAGE
 [EABU-132]. Return coreDb syntax error when:
- A Status has a source with only Vmask filled

36
Internal
 - An Analog has a destination with only Threshold filled

 [EABU-137] HUe: "coreDb. Error loading" error when opened a configuration with
Redundancy by protocol and VIA Net in the first VIA.

 [EABU-140] SNMP Agent management. Enabled in Saitel 866e in profile 11.06.24+

 Updated webUI manual and Easergy Builder core manual
 [EABU-146] Include the management of formula period time in RTUs profiles.
 [EABU-147] SNMP Agent: The User minimum length is not 8 characters
 [EABU-150] Missing description of new supervision signals for T300 2.8.1
 New profile T300 v02.08.01(HU250-CN)
 [EABU-154] "Label 1" visible in Supervision wizard
ATS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
•

 [EABU-135] Error “The value for column ‘FASTOPEN’ in table ‘ATSCNF’ id DbNull in
coreDb checking.

cilo

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Updated CreateLib method to support String table.

37
Internal
IEC103M

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Updated CreateLib method to support String table.
IEC104M

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Updated CreateLib method to support String table.
IEC104S

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
•

 [EABU-68] Allow to edit the EVENT MODE attribute for Analog monitoring points.
 [EABU-143] When adding a I104 controller with profile DLT634.5104 MITB and MITC
points should have default configuration as T300 Generator profile.

 [EABU-145]
SGCC IEC104
Allow duplicates coordinates for 0:GETEDITSG destination coordinates in

38
Internal
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-79] IEC 61850 ICD editor creates incorrect data type templates for controls
 [EABU-126] IEC 61850 communication to P3 fails to receive reports
 [EABU-95] Manage Functional Naming functionality in function of a RTU profile parameter
 [EABU-65] Legacy Catconfig configurations, DP (866)
 [EABU-11] Not able to add report control block names bigger than 30 characters
 [EABU-13] Differences detected between a report configured with EB and the info saved
 [EABU-84] IEC 61850 MMS+GOOSE for Saitel DP IT1 - Preparation of datamodel
 [EABU-101] 61850: configuration corrupted
 [EABU-109] IEC61850:Non controlled exception message when creates a new RTU
 [EABU-124] Attached configuration using custom SCD files in T300G marked as invalid a
coreDB point which is not

MDBM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder 1.7.X+

 [EABU-149] Include the communication type in Modbus master device wizard
 Optimization of Device wizard to help the user to enter a valid slave number and a valid
protocol type.

39
Internal
 [EABU-148] Error removing a modbus master device.
MDBS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder 1.7.X+

 [EABU-164] Invalid error on coreDB check with diagnostic coordinate
MDBE_COM_STATUS

MICOM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Crash when click "Event ACK mode" and change the focus.
 Crash when click "Date FMT" and change the focus.
 Updated CreateLib method to support String table.
SEPAM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Updated CreateLib method to support String table.

40
Internal
SNMPM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-138] SNMPM:Time period value must contain only digits

 [EABU-104] Manage sensitive data. Modifications:
- In new configuration Version "3" option is not available
- Loading a config that already has Version "3" (for example reading from a RTU with this
option selected), Version "3" is selected. No option to set a user+password because fields
are not available, but the xml user+password configuration loaded is kept if user don’t
modify the Version to other that "3"

 [EABU-94] SNMP Manager - The PERIOD field should only allow integer numbers and be
specified in time units (min,seconds)

 [EABU-97] Generated wrong XML file. Optimized function when a device is re-named.
 [EABU-98] SNMPM: Only HU250 can change to IPv6
 [EABU-99] Wrong boundary and type value for PERIOD

SOE

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible only with Easergy Builder 1.7.X+

 Updated CreateLib method to support String table.
SpaBusM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0

41
Internal
 • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Not compatible with Easergy Builder 1.6.X

 [EABU-133] coreDb limit values make Easergy Builder break [SPA-Bus]
 [EABU-114] coreDb check does not warn about two duplicated points (SPA Bus)
 [EABU-118] Signals and Events field are not checked
 [EABU-122] Missing and incorrect information in SPA-Bus Master device
 [EABU-128] coreDb does not warn about errors while webApp does [SPA BUS]

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.5.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.7.9+

 [EABU-125] Error opening a configuration with images read from RTU.
 Removed functionality:
[DAS-293] EB.Manage elements color
Because it will be managed at screen level not at global level.

 [EABU-121] When moved the measure on the screen change the "Units" defined by "kV"
 [EABU-110] webUI: wrong color for transf-tertiary
 [EABU-112] webUI crashes when aligns the selected figures
 [EABU-115] webUI: remove warning sign from AB_DI image

42
Internal
 [EABU-116] webUI: Level 2 command status doesn't appear
 [EABU-121] webUI: "Measure" items are not resized when the user changes their font size
 [EABU-117] webUI: Labels container size don't match the text
 [EABU-120]
loading fails.
webUI. Memory leak makes that after opening a configuration some times the

 [DAS-325] Manage objects in zoom levels

 [DAS-327] EB. Management of hide/Show screens
 [DAS-348] EB. Include HUe management in webUI plugin
 [EABU-93] Simplify the numer of measures elements
 [DAS-293] EB.Manage elements color
 [EABU-12] The plugin only should allow external links starting with http:// or https://.
 [DAS-265] Manage 7 voltage level colors. Default colors are the Iberdrola defined one.
 [EABU-82] Update the webUI preview to the new webUI interface look
 [EABU-83] When user changes the units (Text field) of a voltage measure, the units are
not updated in the drawing.

 [SAIT-6206] Create a button for open an external link

 [SAIT-6089] SM_AI16 and SM_AI8AO4 modules cannot be used in webUI.
 For jenkins compilation this change is needed:
Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

 Tooltips of the main bar are not translated to spanish

 SM_DO16R configuration is not generated in configuration xml.
 Included
screen.
a new button for removing the customer logo in System identification editor

43
Internal
 44
Internal
Easergy Builder_1.7.9.4

Easergy Builder_1.7.9.4
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.09
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.08
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.11
IEC61850_SPlugin.msi IEC61850_01.02.19
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.02
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09
webUI_SPlugin.msi webUI_01.02.08
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

45
Internal
 Reverted webUI version to the last validated one.

46
Internal
Easergy Builder_1.7.9.3

Easergy Builder_1.7.9.3
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.09
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.08
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.11
IEC61850_SPlugin.msi IEC61850_01.02.19
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.02
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09
webUI_SPlugin.msi webUI_01.02.17
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

IEC101_Slave

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

47
Internal
 Compatible with Easergy Builder v01.07.0X. Compiled with symbol CORE_1_7_1
 [EABU-136] When loading a .tar.gz generated with T300G, configuration load fails

48
Internal
Easergy Builder_1.7.9.2

Easergy Builder_1.7.9.2
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.09
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.07
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.11
IEC61850_SPlugin.msi IEC61850_01.02.19
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.02
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09
webUI_SPlugin.msi webUI_01.02.17
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.5.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

49
Internal
 Compatible for EB 1.7.9+
 [EABU-110] webUI: wrong color for transf-tertiary
 [EABU-112] webUI crashes when aligns the selected figures
 [EABU-115] webUI: remove warning sign from AB_DI image
 [EABU-116] webUI: Level 2 command status doesn't appear
 [EABU-121] webUI: "Measure" items are not resized when the user changes their font size
 [EABU-117] webUI: Labels container size don't match the text
 [EABU-120]
loading fails.
webUI. Memory leak makes that after opening a configuration some times the

 [DAS-325] Manage objects in zoom levels

50
Internal
Easergy Builder_1.7.9.1

Easergy Builder_1.7.9.1
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.09
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.07
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.11
IEC61850_SPlugin.msi IEC61850_01.02.19
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.02
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09
webUI_SPlugin.msi webUI_01.02.16
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

IEC101S

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

51
Internal
 Compatible with Easergy Builder v01.07.0X. Compiled with symbol CORE_1_7_1
 [EABU-102] Fail processing TAR.GZ or reading from HU 1.2 into EB T300 profile 1.2. Add
support for attribute EVENTMODE.

IEC104S

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-102] Support of attribute EVENTMODE in element SEC_POINT_NM1.

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.5.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.7.9+

 [DAS-327] EB. Management of hide/Show screens
 [DAS-348] EB. Include HUe management in webUI plugin
 [EABU-93] Simplify the numer of measures elements
 [DAS-293] EB.Manage elements color
Easergy Builder_1.7.9.0

Easergy Builder_1.7.9.0
Binary file Release module

52
Internal
 Easergy Builder.data Easergy_Builder_01.07.09
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.04
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.06
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.10
IEC61850_SPlugin.msi IEC61850_01.02.19
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.02
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.09
webUI_SPlugin.msi webUI_01.02.15
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

Easergy Builder

 [EABU-80] Error in dbRed checking

 [EABU-64] SpaBus Master shouldn’t be included in RTU profiles:
Saitel DP-SM_CPU866e 11.06.00
Saitel DR-HUe 11.06.00

 [EABU-17] Allow special chars in HU_BI users password.

 [EABU-5] Persistent "working" message

53
Internal
 [EABU-4] Wrong information when EB makes a coreDb checking
 [EABU-70] Crash in dbNet when adding the device PRP(LAN2(A)-LAN1(B))
 [EABU-88] HU120 must include PTP option in Synchronization devices
 [EABU-92] Error loading 2.8 Enedis configuration in 2.8 Standard RTU.
 Optimized Devices management
 [EABU-81] New profiles 866e 11.06.24+ and HUe 11.06.15+ including T300 2.7 controller
functionality.

 [TANR-4701] Updated manuals.

 [EABU-96] Show String table only for RTUs that support it.
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-100] Easergy Builder allow diagnostic signals not supported by some Fw versions.

 [EABU-95] Manage Functional Naming functionality in function of a RTU profile parameter

DNPM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-71] Fixed auto request mask tooltip.

 [EABU-91] Problem in the validation xsd. It is missing the element COMM_TYPES. This
makes configurations with Digital command types defined are not loaded.

54
Internal
IEC104S

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-14] IEC104: new configuration parameter to adapt the format of Fault Event
Information to EPC: “MFT_MSP_SIZE_IOA2” in element SEC_SGCC.

 [TANR-5519] Problem with Dynamic threshold percentage value. It Should allow decimal
values but the separator depends on the computer culture (decimal separator char).
I have fixed for using “.” As decimal separator no matter the computer culture.

 [EABU-89] CoreDB allows to insert manually I104 IOAs for settings that are out of the
allowed range.

SpaBusM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Not compatible with Easergy Builder 1.6.X

 [EABU-64] Plugin was modifying the profiles Saitel DP-SM_CPU866e 11.06.00 and Saitel
DR-HUe 11.06.00 adding the support for SpabusM devices.

 Plugin Including the help documents in core help menu. It should be managed by Easergy
Builder core.

HST

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [EABU-86] FLOWREV device types should be configured with:

"Period of scan" in range 1-30 like EXV type
"Number of records" in range 1024-2048 like SOE type

55
Internal
 [TANR-5985] Flowrev trigger coordinate is not recognized by EB HST plugin
 Fixed: When opening the wizard for a new point, the default coordinate is always set to the
first one in the table.

 Fixed: When opening any instance of device previously configured and try to change any
value, when clicking on Validate buttom, an error message is shown to indicate "Invalid
Type".

 Fixed: Plugin is not working when importing conf from Excel

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.7.X. Not compatible with EB 1.6.X

 [EABU-12] The plugin only should allow external links starting with http:// or https://.
 [DAS-265] Manage 7 voltage level colors. Default colors are the Iberdrola defined one.
 [EABU-82] Update the webUI preview to the new webUI interface look
 [EABU-83] When user changes the units(Text field) of a voltage measure, the units are not
updated in the drawing.

56
Internal
Easergy Builder_1.7.8.0

Easergy Builder_1.7.8.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.08
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.13
DNP_Master_SPlugin.msi DNPM_01.03.03
DNP_Slave_SPlugin.msi DNPS_01.03.04
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.06
IEC103_Master_SPlugin.msi IEC103M_01.00.12
IEC104_Master_SPlugin.msi IEC104M_01.02.07
IEC104_Slave_SPlugin.msi IEC104S_01.05.09
IEC61850_SPlugin.msi IEC61850_01.02.18
IsaGRAF.msi ISAGRAF_01.00.03
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.03
LAQ_SPlugin.msi LAQ_01.02.07
Host Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.01
ModBus_Slave_SPlugin.msi MDBS_01.01.02
SEPAM_SPlugin.msi SEPAM_01.01.04
SOE_SPlugin.msi SOE_01.01.06
SPABUS_SPlugin.msi SpaBusM_01.00.01
ATS_SPlugin.msi ATS_01.00.16
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.09
HST_SPlugin.msi HST_01.00.07
webUI_SPlugin.msi webUI_01.02.14
TSV_SPlugin.msi TSV_01.00.06
MICOM_SPLugin.msi MICOM_01.00.07

Easergy Builder

 [TANR-5857] String table settings in profile are not loaded.

 [TANR-5864] Easergy Builder - T300 2.8 profile - new sup coordinates

57
Internal
 [TANR-3171] Multilanguage - Device wrong name alert Enhancement
 [TANR-5790] CoreDB limits should be increased for Excel Importation to allow max T300
Generator configuration

 [TANR-5816] Profile T300 v02.08CN renamed to v02.08(HU250-CN)

 [TANR-5816] In channel encryption change label SGCC by SM2 digital certificate
 [SAIT-6236] Include support for SpaBus Master plugin in RTUS:
Saitel DP-SM_CPU866e 11.06.16+
Saitel DR-HUe 11.06.09+

 [SAIT-6191] The plugin service AddPointList returns error showing the error in the ref
argument ErrMsg, but coreDB invalid points are not marked as invalid.

 [SAIT-6246] Problem editing Router for RTU B in redundant configuration

 Updated SSH.NET from
 [SAIT-6133]
network IPs.
In redundancy configuration, there is no checking of duplicated serial ports or

 [SAIT-6132] in dbNET, users can add ports that use two network devices and devices itself
without error. For example, an user can add device PRP1(ETH1-ETH2) and ETH1.

 [SAIT-6104]. Removed the option of 5 and 6 data bits in profiles: Saitel DP-SM_CPU866,
Saitel DP-SM_CPU866e, Saitel DR-HU120, Saitel DR-HUe, Saitel DR-HU_A, Saitel DR-
HU_AF, Saitel DR-HU120

DNPM

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export*.dll

CLAQ

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export*.dll

58
Internal
DNPS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 TANR-5813: DNP slave, new parameters, start delay and unused IIN bits

 TANR-5812: DNP slave configuration TXFRAGMENTSIZE invalid checking.

 For jenkins compilation this change is needed:
Update Easergy Builder core .dll references to path ..\..\Core\Export*.dll

IEC101S

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0
• SupervisionCoords.dll 1.0.0.0

 Change the label of Profile SGCC in 101 plugin by "DLT634.5101"

 Spelling mistake in I101 Slave plugin controller
 Plugin should only check that the format of the coordinate is correct during syntax
checking no matter the configuration.

IEC103M

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

IEC104M

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

59
Internal
 For jenkins compilation this change is needed:
Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

IEC104S

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: Plugin does not show "Save events" option for all 2.8 profiles, only ENEDIS
 Change the label of Profile SGCC by "DLT634.5104"
 Spelling mistake in I104 plugin controller
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Plugin does not allow cdc CUG mapping in coreDb with the point wizard

 Always display LDevice inst and also display ldName only if it has a value
 The attribute 'ldName' is removed when user modifies it as an empty string
 Plugin should check LGOS instances in config file and SCD file
 The limit for prefix+lnClass+lnInst for a new logical node is 16 alphanumeric characters.
 Prefix and LN instance control values are initialized when add logical node form is loaded.
 Maximum value for logical node instance in the control for adding a logical node is set to
the maximum uint32, 4,294,967,295.

60
Internal
ISAGRAF

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

ISAGRAF5

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

 Fixed: Error generating dictionary when dictionary contains internal variable with initial
value containing simple quotes.

LAQ

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 [SAIT-6135] SM_CPU866e picture is changed for SM_CPU866 one.

 [SAIT-5963] When there is more than 63 modules, the “Add a module” button is disabled
 For jenkins compilation this change is needed:
Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

MDBM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

For jenkins compilation this change is needed:

61
Internal
MDBS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder 1.6.X+ and Easergy Builder 1.7.X+

 [SAIT-4289]
Fixed errors in coreDb checking with Generic profile.
Allowed coordinate DIAG:COMMAND in Generic profile
Fixed: In Generic profile Points wizard, current coordinates are not loaded in wizard and
Double coordinates can be generated (not supported in Generic)

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

SEPAM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

SOE

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

For jenkins compilation this change is needed:

SpaBusM

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

62
Internal
 Initial Release
ATS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Plugin only checks for the FAST MODE variables if the ATS fast mode is enabled.
 When user set screen scaling to 125% ATS plugin buttons are nor reachable
ESD

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 The parameters popup associated to a coordinate is now refreshed

HST

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 When there are already some points set to HST devices, when opening the wizard for a
new point, the default coordinate is always set to the first one in the table. This induces to
an error as the coordinate is duplicated and will return an error if it is selected.

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export*.dll

63
Internal
webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.7.X. Not compatible with EB 1.6.X

 [SAIT-6206] Create an button for open an external link
 [SAIT-6089] SM_AI16 and SM_AI8AO4 modules cannot be used in webUI.
 For jenkins compilation this change is needed:
Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

TSV

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

MICOM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For jenkins compilation this change is needed:

Update Easergy Builder core .dll references to path ..\..\Core\Export\*.dll

64
Internal
Easergy Builder_1.7.7.0

Easergy Builder_1.7.7.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.07
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.12
DNP_Master_SPlugin.msi DNPM_01.03.01
DNP_Slave_SPlugin.msi DNPS_01.03.01
IEC101_Master_SPlugin.msi IEC101M_01.02.06
IEC101_Slave_SPlugin.msi IEC101S_01.05.04
IEC103_Master_SPlugin.msi IEC103M_01.00.11
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.08
IEC61850_SPlugin.msi IEC61850_01.02.16
IsaGRAF.msi ISAGRAF_01.00.02
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
Host LAQ_SPlugin.msi LAQ_01.02.05
Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.00
ModBus_Slave_SPlugin.msi MDBS_01.01.00
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.15
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.08
HST_SPlugin.msi HST_01.00.06
webUI_SPlugin.msi webUI_01.02.10
TSV_SPlugin.msi TSV_01.00.05
MICOM_SPLugin.msi MICOM_01.00.06

Easergy Builder

 Based in Easergy Builder_1.6.7

 Profile T300v2.8 is divided in 3:
- T300v2.8 with chan encryption removed and all ENEDIS features removed.
- T300v2.8CN based on T300v2.8 but with chan encryption.
T300v2.8ENEDIS based on T300v2.8 but with all Enedis features.

65
Internal
 SAIT-6126. Points from a template in template catalog are not Loaded.
 SAIT-6082 & SAIT-6083. Some extra modifications in the Addons plugins Api for fixing the
issue that: WebUI information from .tar.gz and RTU image folder is not imported in
configuration when loading a .tar.gz or RTU image folder contains webUI info.

 Removed RTU profile Saitel DR-HUe v11.07 because it not yet available for user
 SAIT-6108 Configurations profile are not copied from parent RTU.
 SAIT-6082 SAIT-6083. WebUI information from .tar.gz and RTU image folder is not
imported in configuration when loading a .tar.gz or RTU image folder contains webUI info.

IEC104_Slave

 For •the libSaitel.dll

generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: Easergy Builder does not allow to send conf when ebc is imported and directly sent
 Fixed: Error loading configuration from english to spanish
 Fixed: When modifying parameter SAVE_EVENTS, the modification is done in all sectors
 Fixed: In setting values of form points Wizard, for SGCC profile, it lets you enter 16777216
and marks it as incorrect

 Fixed: When switching to ENEDIS profile, String table coordinates are not marked as
invalid when performing coreDB checking so the SGCC points remain. However if any
point is mapped again or a new one is added an error is displayed.

IEC101_Master

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

66
Internal
 Fixed: In a Link of channels, Link parameters are not loaded
IEC103_Master

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0

 [SAIT-6110]Coordinates with the same “information number” but different “position index”
are marked as duplicated in coreDb checking.

 Implemented checking against xsd.

 Points coordinates wizard always generated the same coordinate when It is launched over
some coordinates cells.
Now in Status and Analog tables, "position index" is incremented if enebled, else
"information number" is incremented. In Setpoint and Command tables, "information
number" is incremented.

 Points coordinates wizard always showed the wizard with default vales. Now if user
launches the wizard over an existing coordinate, the current coordinate fields are set.

HST

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For bin type EXV, the PERIOD parameter should be configured with values from 1 to 30
TSV

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Easergy builder core installation doesn’t show the option for TSV installation.

67
Internal
ESD

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 The parameters popup associated to a coordinate is now refreshed

CLAQ

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Reverted
change:
this change introduced in CLAQ_01.01.08 because Fw is not updated for this

Disabled ENTID ordering after a change of signal type or enabling/disabling a signal. This
makes a signal ENTID(coordinate) is always the same no mater the other signals status

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.7.X. Not compatible with EB 1.6.X

 Tooltips of the main bar are not translated to spanish
 SM_DO16R configuration is not generated in configuration xml.

68
Internal
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: 'orCat' and 'orIdent' BDA elements must not map in coreDb
 Fixed: Plugin uses ldName for RCB with LDevices that do not have ldName
 Fixed: Points from FCDA are not created in coreDb with coordinates too long.
 Fixed: Plugin does not show RCB in the assigned list
 Fixed: Wizard starts with all new diagnostic points (DIAG:OP_RESPONSE,
DIAG:OP_CMDTERM, DIAG:OP_ADDCAUSE, DIAG:OP_FAILURE) in Used column, so
user cannot select them

 Added new status source diagnostic points:

DIAG:OP_CMDTERM, DIAG:OP_ADDCAUSE, DIAG:OP_FAILURE for Edition 2
DIAG:OP_RESPONSE,

 Set restrictions for attributes when adding a logical node

 Set default value 0 for "integrity period" in report controls
 Fixed: "Integrity period" value only is shown in the first buffered report when the value is 0,
and the value saved in i61_conf.xml is 1000

 Fixed: Unhandled exception when adding a logical node in a ICD

69
Internal
Easergy Builder_1.7.6.0

Easergy Builder_1.7.6.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.06
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.11
DNP_Master_SPlugin.msi DNPM_01.03.01
DNP_Slave_SPlugin.msi DNPS_01.03.01
IEC101_Master_SPlugin.msi IEC101M_01.02.05
IEC101_Slave_SPlugin.msi IEC101S_01.05.04
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.06
IEC61850_SPlugin.msi IEC61850_01.02.12
IsaGRAF.msi ISAGRAF_01.00.02
Host IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.05
Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.00
ModBus_Slave_SPlugin.msi MDBS_01.01.00
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.15
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.07
HST_SPlugin.msi HST_01.00.05
webUI_SPlugin.msi webUI_01.02.06

Easergy Builder

 Based in Easergy Builder_1.6.6

 SAIT-6112. Due to new security Windows policies Easergy Builder return error on
configuration Loading, configuration creation, etc. Error received:
“This implementation is not part of the Windows Platform FIPS validated cryptographic
algorithms.”

70
Internal
 Configurations profile update is not performed during workspace loading (for avoiding a lot
of time “working message”. It is updated during configuration load. A warning message is
shown:
“Configuration is going to be updated because RTU profile has been updated. It would be
a good option to save it or clone it before. Continue?”

IEC104_Slave

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 New SECTOR attribute SAVE_EVENTS available for RTU T300 2.8. Available only when
RTU profile has the parameter:
<PARAM NAME="SaveEvents" VALUE="Y"/>

 Analog
checking
points with Destination DIAG:TRIG:DSn points are reported as invalid in coreDb

 Enable Open Address Schema for the CAA and IOA in IEC104. Available only when RTU
profile has the parameter:
<PARAM NAME="OAS" VALUE="Y"/>

webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible for EB 1.6.X. Not compatible with EB 1.7.X

 SAIT-6114 Due to new Windows security policies webUI is not working
 SAIT-6072 The text IHM is wrong in english (must be replaced by HMI)
 Included some missing translations
 SAIT-6053 Voltage indication text is now editable

71
Internal
 SAIT-6041 webUI - Easergy Builder fail saving information of webUI
 SAIT-6039 webUI - Easergy Builder crash when a circular actuator is minimized
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: Empty RCB in i61_conf.xml when creating a IED instance from an ICD
Easergy Builder_1.7.5.0

Easergy Builder_1.7.5.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.05
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.11
DNP_Master_SPlugin.msi DNPM_01.03.01
DNP_Slave_SPlugin.msi DNPS_01.03.01
IEC101_Master_SPlugin.msi IEC101M_01.02.05
IEC101_Slave_SPlugin.msi IEC101S_01.05.04
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.05
IEC61850_SPlugin.msi IEC61850_01.02.11
Host IsaGRAF.msi ISAGRAF_01.00.02
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.05
Lioc_SPlugin.msi Lioc_01.01.11
ModBus_Master_SPlugin.msi MDBM_01.02.00
ModBus_Slave_SPlugin.msi MDBS_01.01.00
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.15
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07

72
Internal
 ESD_SPlugin.msi ESD_01.00.07
HST_SPlugin.msi HST_01.00.05
webUI_SPlugin.msi webUI_01.02.04

Easergy Builder

 Based in Easergy Builder_1.6.5. Including updated Saitel Templates.

 Easergy Builder fails when importing Excel previously exported
 Easergy Builder blocks when trying to open an .ebc file (clicking on it) and having another
configuration previously opened.

 Supervision
RTU T300 v2.8.
plugin must include a new status coordinate "RESET_RTU" for resetting the

 Easergy
chars.
Buider hangs when trying to send a configuration with a point name larger than 32

 Trying to create a slave 61850 an error appears and Easergy builder crashes.
 Shared Subscribe appears duplicate in the Status table
 Easergy Builder: String values are not accepted in String table (INIT VALUE), only numeric
values. Also does not save changes.

 New PARAM “RESET_DO” in Lioc T300 2.8 profile.

 Easergy Builder: "Excel Export" does not export String table
 Init values in table Strings are not saved
webUI

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compiled with new libSaitel.dll that supports strings table.

IMPORTANT NOTE: Excel import and Export plugins included are not compatible with
Easergy_Builder_01.06.XX because this plugins has implemented the string

73
Internal
 import/exports apis

 Changed KV for kV
IEC61850

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 In the LGOS initial values the plugin must use setSrcRef instead of setSrcCB
 Fixed: Unhandled exception when creating a new ICD Ed2 data model because of new
'ProtNs' elements in iecdata_ed2.xdb

 Plugin shows tooltip with the value of Val elements in the tree view control
 Inorigin
form for selecting Dataset elements to create CoreDb points the plugin have not show
element

 Max MMS PDU length limit set to 1024Kb

 Fixed: The plugin does not recognize non-indexed reports when the RCB attribute does
not contain the name of the IED

 Fixed: unhandled exception shown: IID file causes message Error saving IEC 61850 files
but gives no details

 Plugin does not show a warning message with invalid GOID

 Truncate appID of GSEControl and rptID of ReportControl when exporting a ICD file
 Truncate appID when creating a ICD file
 Fixed: New meaning of Services.ClientServices.maxAttributes
 Fixed: Error importing IED with Services.ConfLdName but LDevice has no ldName: when
no ldName is given the plugin should assume Product Naming

 New file 'Saitel_ed2.icd' with attributes 'valKind'

 Checking max string RCB name length, for Ed.2

74
Internal
 Max string length for IED+LDevice in CoreDb coordinates set to 64 chars, for Ed.2
 Max string length for prefix+lnClass+lnInst coordinates set to 16 chars, for Ed.2
 New format for LGOS object references
 New revision 1.5 of file 'iecdata_ed2.xdb'
 New error message when loading an ICD/CID with more than one IED.
 Plugin does not check 'Services.ClientServices' anymore
 Fixed: Duplicated LN when creating ICD file with SPC and DPC
 Fixed: Duplicated Val elements in SCL file when creaing ICD file
 File local server minimum renamed to "T300_ed2.icd" for T300
 Plugin warns the user for duplicated ClientLN in the loaded SCD file
 Changed warning log text when duplicated RCB; message more specific so the user
knows where the problem is

 Fixed: Plugin does not show LDevice.ldName in the SCL tree view when creating a
configuration with functional naming

 Plugin must process RCB without IedName

 Plugin fails for the CoreDb coordinates that use a different product/functional naming
convention

 New server files (Saitel_ed1.icd, Saitel_ed2.icd).

'localServerMinimum_ed1.xml' and 'localServerMinimum_ed2.xml'
Removed files

 Build a SCD file with options for functional or product naming.

 Plugin must check ReportControl in the loaded SCL file and show warning message in the
log when RCB in i61conf does not match in loaded SCL data model

 Incomplete: Changing LDevice 'inst' or 'ldName' must update references to SCD, i61Conf
and CoreDb coordinates

 Unbuffered report controls will not have EntryID in the CoreDb coordinates

75
Internal
 The plugin should present the Buffered Report Control Block 61850 object references to
the user in the Report Control Block drop-down box only if the RCB has a dataset
assigned

ESD

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: Plugin fails when an incorrect value is introduced

 Fixed: Error checking coreDb in analog coordinates
HST

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 For bin type EXV, the PERIOD parameter should be configured with values from 1 to 30
 Fixed: PERIOD value is not been updated in the control
 Fixed: Plugin still shows configured device when loading an invalid configuration
 The PERIOD value in a device with FIXPT type is changed when another device with EXV
type is added

IEC101 Slave

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

76
Internal
 The resource file in German language has been modified
 Plugin shows coreDb checking point error when manually enter a source or destination
coordinate in String table with profiles different than SGCC

 New optional field 'SCALE' in the coordinate of parameters and setting values, for SGCC
profile

 Coordinate assignment has been enhanced, in a similar way as in IEC104S plugin

IEC104 Slave

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 New optional field 'SCALE' in the coordinate of parameters and setting values, for SGCC
profile

 Plugin shows coreDb checking point error when manually enter a source or destination
coordinate in String table with profiles different than SGCC

 Event mode selection is now hidden and not configurable by the user anymore
 New diagnostic signal DIAG:BKUP for ENEDIS profile
Lioc

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 New coordinates HMI_RST, HMI_TST, GGIO_RESET, HMI_TSTSTR and HMI_RSTSTR

for Enedis/Emis

ATS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.4.0.0

77
Internal
 • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 New coordinate AATS_SRC_SELF for source and command destination

 New Boolean parameter FASTOPEN
 Plugin show warning message informing on the accepted ranges when introducing values
out of range

 Added new status/command source coordinate AATS_FAST_MODE_ENABLE:SCXX

Easergy Builder_1.7.4.0

Easergy Builder_1.7.4.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.04
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.11
DNP_Master_SPlugin.msi DNPM_01.03.01
DNP_Slave_SPlugin.msi DNPS_01.03.01
IEC101_Master_SPlugin.msi IEC101M_01.02.05
IEC101_Slave_SPlugin.msi IEC101S_01.05.02
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.04
IEC61850_SPlugin.msi IEC61850_01.02.06
IsaGRAF.msi ISAGRAF_01.00.02
Host IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.05
Lioc_SPlugin.msi Lioc_01.01.10
ModBus_Master_SPlugin.msi MDBM_01.02.00
ModBus_Slave_SPlugin.msi MDBS_01.01.00
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.14
SNMPM_SPlugin.msi SNMPM_01.00.08
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.04
HST_SPlugin.msi HST_01.00.03

78
Internal
Easergy Builder

 Based in Easergy Builder_1.6.5

 When I read a configuration from T300 to Easergy builder, the field ACTIVE disappear in
db_bin. When I send this conf to T300, all devices are activated.

 -Display the device differently when it is disabled

-Add a possibility to active or deactive a device in Easergy builder

Only for profile T300 2.8, a new button is visible in Devices tab. This button is disabled and
only enabled if a device from a master protocol is selected.
Pushing the button the device status changes from enable <--> disable status. and the
background is changed from white to gray.

 New supervision coordinates HW_VERSION and SW_VERSION as String Source

 When changing the name of a 101 or 104 slave device, the previous one is deleted for any
mapping that was done for that device in string table. When opening device list to select
the new one, it appears in black color.

 New sup coordinates for T300 2.8

Define the following "RTU Historical information" supervision signals:
REBOOT
NEWCONF
NEWFIRM

IEC104_Slave

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: Plugin Wizard allows to select invalid IOAs for setting coordinates (IOA:Tx:DSx)
 For SGCC profile T4 and T8 only can be mapped in STRING table as destination
 For SGCC profile Tag Types different from T4 and T8 (IOA: [TagType]: [SE | SP]) should
not be shown in points wizard for STRING destination

79
Internal
 For SGCC profile, plugin must not allow to introduce coordinates of the type
IOA:[TagType]:[SE|SP] whith same IOAs for different Tag Types

 CoreDB checking does not mark as invalid incorrect mappings of coordinates for SGCC
Settings management (SETACTSG, GETACTSG, etc)

 Fixed: SGCC points are not marked as invalid when switching to previous HU250 versions
IEC101_Slave

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder v01.07.01. Compiled with symbol CORE_1_7_1

 Fixed: Error loading configurations without attribute PROFILE
 Coordinates IOA: [TagType]: [SE | SP] should be marked as invalid instantiation if mapped
to other table than String destination

 Tag types T4 and T8 only can be mapped to String destination coordinates.

 For SGCC profile, plugin must not allow to introduce coordinates of the type
IOA:[TagType]:[SE|SP] whith same IOAs for different Tag Types

 CoreDB checking does not mark as invalid incorrect mappings of coordinates for SGCC
Settings management (SETACTSG, GETACTSG, etc)

 Fixed: DIAG:TRIG:DSx is, incorrectly, enabled for selection as source in Status and analog
tables and as source and destination in command and setpoint tables

 Fixed: Points wizard allows to select invalid IOAs for setting coordinates (IOA:Tx:DSx)
 Fixed: Points wizard does not show the coordinate that is being editing
 Fixed: Non controlled exception when trying to change I101 Slave device name
ATS

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0

80
Internal
 • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Enlarged delay to transfer limit to 21600000

 Changed numeric up-down controls to text box controls
 New parameters PARALLELENA and TWAITSYNCHRO for parallel transfer
 New CoreDb coordinates RSYN_REL, AATS_SEQSTATE, AATS_SEQRESULT,
AATS_BLK_SELF_RET, AATS_FORCE_SWITCH, AATS_S1_FORCE,
AATS_S2_FORCE

 Values for the attribute "Allow back to normal source transfer" should be "Y"/"N"/"V"
DNP_Slave

 For•thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 DNPS: When a configuration has more than one DNPS devices the configuration is
not loaded showing an error in the log
Warning: DNP Slave. Error loading: The element 'SESSION' has invalid child
element 'nextversion' in namespace 'http://www.schneider-
electric.com/tango/versioning'. List of possible elements expected: 'AUTH_USER,
AUTH_STATISTICS_THRESHOLD'.

DNP_Master

 For•thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 When
loaded
a configuration has more than one DNPM devices the configuration is not

81
Internal
 When a DNP Master device is not configured (Appears with a ? icon in the devices
list), if coredb check is performed, the following error is launched:
Unable to cast object of type 'DNPM.RequestGroupsNode' to type
'DNPM.ChanNode'.

SNMP_Master

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Hide 'InvalidUser' text when when plugin is configured with version 3.

Easergy Builder_1.7.3.0

Easergy Builder_1.7.3.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.03
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.11
DNP_Master_SPlugin.msi DNPM_01.03.00
DNP_Slave_SPlugin.msi DNPS_01.03.00
IEC101_Master_SPlugin.msi IEC101M_01.02.05
IEC101_Slave_SPlugin.msi IEC101S_01.05.01
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.03
IEC61850_SPlugin.msi IEC61850_01.02.26
Host IsaGRAF.msi ISAGRAF_01.00.02
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.05
Lioc_SPlugin.msi Lioc_01.01.10
ModBus_Master_SPlugin.msi MDBM_01.02.00
ModBus_Slave_SPlugin.msi MDBS_01.01.00
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.12
SNMPM_SPlugin.msi SNMPM_01.00.07
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07

82
Internal
 ESD_SPlugin.msi ESD_01.00.04
HST_SPlugin.msi HST_01.00.03

Easergy Builder

 Based in Easergy Builder_1.6.5

 String values are not accepted in String table (INIT VALUE), only numeric values. Also
does not save changes.

 "Excel Export" does not export String table

 SNTP client servers are not loaded in Secondary Device
 Sync client timeout 0 should not be available
 Shared Subscribe appears duplicate in the Status table.
 Crash when loading a configuration .ebc. that is being used.
 Easergy Builder allows to configure SNTP with Invalid IP Address
 Itconfiguration
is allowed to send invalid configurations from “Send configuration to RTU” button in the
edition mode. Checking against schemas is not preformed.

 Improved checking XMLs against XSD management

 Easergy
Engineer
Builder stop responding when trying to read configuration with a role different than

 Easergy Builder Error when filtering destination in coreDB table and deleting the filtered
destination devices and coordinates

 Cybersecurity - Remove port forwarding feature

 Support for HST(Historical Sequence of Event) in profile T300 2.8
CLAQ

 Fixed: Easergy Builder fails when user tries to create a HU_BI configuration

83
Internal
 Fixed a problem when AutoAddress checkbox is unselected.
 Fixed: Build Version coordinate for AB_AC LPVT is no longer accepted in coreDB
 Set limit for 'ID:80 Quality. Current Umbalance set time(ms)' to 200000 instead of 300000
 DO doubles coordinates are being generated with "06" type when they should be
generated with "15" type.

 Changed “acquisition” and “local acquisition” by “I/O”

 Included a management of obsolete modules.
 The position of the signal included in 1.1.7 for AB_AC_LPVT quality “AB_AC_LPVT -
Inverse sequence current (p.u)” has been moved to the end of the Quality map (channel
77) for compatibility with older projects. This signal shouldn’t be enabled by default.

 Updated HU120 picture.

 AB_AC2 renamed to AB_AC_LPVT
 Disabled ENTID ordering after a change of signal type or enabling/disabling a signal. This
makes a signal ENTID(coordinate) is always the same no mater the other signals status.

DNP_Master

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 XSD checking normalized
 RX and TX frame size minimum value is 24

84
Internal
DNP_Slave

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 XSD checking normalized
 RX and TX frame size minimum value is 24.
 TXFRAGMENTSIZE range should be 96-2048. Now is 292-2048
 DNP slave remote configuration management, file folder new parameter.
This functionality is only available for profiles with parameter DisableSecurity=”Y”:

IEC101_Slave

 For the generation of the setup the following dlls are been used:
• • libSaitel.dll 8.2.0.0
• • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder v01.07.01. Compiled with symbol CORE_1_7_1

 String table functionality has not been implemented
 When creating a new device the user can not choose between standard or SGCC profile
 When
standard
the user exit the plugin with the cancel button, change the option from SGCC to

 MITB background default value must be 0, for SGCC profile

 MITC background default value must be 0, for SGCC profile
 Fixed: The plugin allows to create the point (IOA: MSP: DSx) as source and destination in
all tables, for SGCC profile

 Fixed: The plugin allows to create the point (IOA: MMEA: DSx) as source and destination
in all tables, for SGCC profile

85
Internal
 Fixed: The plugin allows to create the point (IOA: MMEC: DSx) as source and destination
in all tables, for SGCC profile

 MITB must not be configured as command and setpoint source, for SGCC profile
 MITC must not be configured as command and setpoint source, for SGCC profile
 Fixed: It does not detect duplicate coordinate SETACTSG when one is in command and
the other is in setpoint, for SGCC profile

 Fixed: It does not detect duplicate coordinate GETACTSG when one is in status and the
other is in analog, for SGCC profile

 Fixed: It does not detect duplicate coordinate SETEDITSG when one is in command and
the other is in setpoint, for SGCC profile

 Fixed: It does not detect duplicate coordinate GETEDITSG when one is in status and the
other is in analog, for SGCC profile

 Fixed: It does not detect duplicate coordinate CNFEDIT when one is in command and the
other is in setpoint, for SGCC profile

 Fixed: T1, T2, T4 and T8 (IOA:[TagType]:[SE|SP])are not accepted instead they accept
T01, T02, T04 and T08, for SGCC profile

 Fixed: TAG Type pick list (IOA: [TagType]: [SE | SP]) appears duplicated multiple times in
the combo box control, for SGCC profile

 Validate configuration file against schema before sending configuration to RTU

IEC104_Slave

 For the generation of the setup the following dlls are been used:
• • libSaitel.dll 8.2.0.0
• • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder v01.07.01. Compiled with symbol CORE_1_7_1

 String table functionality has not been implemented
 Fixed: Plugin shows an error when load a workspace with old 104 configurations
 Fixed: bad checking of 104 slave coordinates for SGCC profile
 MITB background default value must be 0, for SGCC profile

86
Internal
 MITC background default value must be 0, for SGCC profile
 COUNT and DELAY are exclusive suffixes in the coordinates, for ENEDIS profile
 COUNT and DELAY only apply to analog coordinates, for ENEDIS profile
 MITB must not be configured as command and setpoint source, for SGCC profile
 MITC must not be configured as command and setpoint source, for SGCC profile
 Fixed: It does not detect duplicate coordinate SETACTSG when one is in command and
the other is in setpoint, for SGCC profile

 Fixed: It does not detect duplicate coordinate GETACTSG when one is in status and the
other is in analog, for SGCC profile

 Fixed: It does not detect duplicate coordinate SETEDITSG when one is in command and
the other is in setpoint, for SGCC profile

 Fixed: It does not detect duplicate coordinate GETEDITSG when one is in status and the
other is in analog, for SGCC profile

 Fixed: It does not detect duplicate coordinate CNFEDIT when one is in command and the
other is in setpoint, for SGCC profile

 Fixed: T1, T2, T4 and T8 (IOA:[TagType]:[SE|SP])are not accepted instead they accept
T01, T02, T04 and T08, for SGCC profile

 Fixed: TAG Type pick list (IOA: [TagType]: [SE | SP]) appears duplicated multiple times in
the combo box control, for SGCC profile

 Validate IEC104S configuration file against schema before sending configuration to RTU
 Fixed: tab ENEDIS does not dissapear when changing profile from ENEDIS to SGCC
 New element SEC_SGCC in XML set after <ver:nextversion/> label
 Fixed: Unhandled exception when checking CoreDb points in a non configured device
IEC61850

 Functional naming, use of ldName for logical devices

 Plugin removes LGOS logical node when deleting GOOSE subscription.

87
Internal
 Fixed: All subscriptors dissapear from the list when the user unsubscribe one of them
IEC61850_01.02.05

 Attribute 'daName' of a FCDA can have dot '.' for Ed2 files
IEC61850_01.02.04

 Hide sensible values to the user in the 'i61_conf.xml' configuration file. Changed elements
in “i61_conf.xml” for Ed2.

 Fixed: plugin ignores GOOSE appID attribute from ICD/CID files and uses GCB variable
name. The plugin will not modify the GSEControl [@appID] attribute of IED instances
created from ICD / CID templates, but will notify the user that they are duplicated if there is
more than one instance created from the same template.

 Remove unused ‘SubNetwork’ and ‘ConnectedAP’ sections from exported ICD/CID files.
 The plugin prevents the creation of a DataSet with a duplicated name.
 Fixed: Invalid automatic creation of CoreDb point coordinate; GOOSE MX points are not
mapped in Analog table in CoreDB when clicking on Creade CoreDB Points.

 Fixed: Crash when default gateway is generated.

IEC61850_01.02.03

 Schema file modified for edition 2 to disable extension CDC enums, so the file will be in
the original form.

 Errors on importing ICD files will be shown only in the plugin’s log.
 Fixed: Coordinate selection does not work when adding new LN not previously defined in
the SCL template. Updated LNodeType names when adding new LN.
IEC61850_01.02.02

 The FCDA elements that refer to a logical device whose identifier has changed are
updated.

 Schema file modified for edition 2 to enable extension CDC enums.

 Plugin rejects an ICD/CID file with client-only IED.
 Fixed: ICD Ed1 files showed error when they were imported, because the plugin did not
support FCDA elements with dot ‘.’ in their attribute 'daName'
IEC61850_01.02.01

88
Internal
 Only coordinates command source with fc=”CO” are allowed for local server.
 Don't allow user to set ‘ldName’ in a logical device.
 Plugin will allow configure DA and BDA in the local server data model.
 The creation of DataSet in the SCL data model has been made easier.
 The creation of ReportControl in the SCL data model has been made easier.
 Updated SCL_IED.xsd schema file for SCL 1.4.
 It allows to map coordinates with fc=ST in analog table.
 New option for adding ‘Val’ elements under DAs for created ICD files.
 New version for file ‘iecdata_ed2.xdb’ (Rev.1.4): added 32 DPC for GGIO.
 Improved creation of ICD files: plugin allows to configure ctlModel, operTimeout,
sboTimeout for digital outputs.

 Changed form to add logical devices to local server from ICD/CID files. User can name the
new logical devices or use a prefix.
IEC61850_01.02.00

 Plugin prevents the creation of IED instances whose names match CoreDb devices.
 Minor change: set the progress indicator form in the background.
 A Cancel button is added to the form “Allowed Command Origins”, for edition 1.
 Addition
deleted.
of LNodes to LD: missing DO when a previous instance had been created and

 User Friendly assignment of values for Data attributes (DOI-DAI-Val Creation)

 Fixed: Wrong IEC 61850 schema diagram when device name and SCD IED server name
are different.

 Validation against schemas when adding new logical nodes.

89
Internal
 Fixed: Error creating coreDB points of an IED Instance with GOOSE.
 Fixed: Wizard points does not allow configured instance of EntryID

LAQ

 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 I/O modules are removed when button cancel is used

 Replaced “acquisition” by “I/O”
 New modules add Interface hides all the obsolete modules and include a button for
showing them and allow to configure.

ModBus_Master

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 XSD checking implemented
 Modbus Master error "Index was out of range" in coreDB checking If any Modbus master
device has a request with a function code:
15:FORCE MULTIPLE COILS
16:PRESET MULTIPLE REGISTERS
16:SYNCHRONIZATION

 Instantiation checking rethinked:

-Requests checkings:
-Read Requests: First coordinate of request should be mapped in Status or Analog
source.
- Write Requests: First coordinate should be mapped in Status or Analog

90
Internal
 destination. (ST and AN destination doesn’t generate event so the only way of
writing is with a write request)
- Coordinates:
-Status and Analog Sources should be included inside a read request.
-Status and Analog Destinations should be included inside a write request of the
same type (HR or CS).
-Command and Setpoint Sources are not allow.
-Command and Setpoint Destinations should be HR or CS.

 When a Modbus master is not configured (? Icon) and there are coordinated associated to
it, handled error "Object reference not set to an instance of an object" is launched.

ModBus_Slave

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.3.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Only compatible with Easergy Builder 1.7.X+

 XSD checking implemented

HST

 Initial Release
Easergy Builder_1.7.2.0

Easergy Builder_1.7.2.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.02
cilo_SPlugin.msi Cilo_01.01.01
Host
CLAQ_SPlugin.msi CLAQ_01.01.07
DNP_Master_SPlugin.msi DNPM_01.02.06
DNP_Slave_SPlugin.msi DNPS_01.02.08

91
Internal
 IEC101_Master_SPlugin.msi IEC101M_01.02.05
IEC101_Slave_SPlugin.msi IEC101S_01.05.00
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.05.00
IEC61850_SPlugin.msi IEC61850_01.01.25
IsaGRAF.msi ISAGRAF_01.00.02
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.04
Lioc_SPlugin.msi Lioc_01.01.10
ModBus_Master_SPlugin.msi MDBM_01.01.05
ModBus_Slave_SPlugin.msi MDBS_01.00.15
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.12
SNMPM_SPlugin.msi SNMPM_01.00.07
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.04

Easergy Builder

 Added 'SGCC' value in extra profile T300 v2.8 for IEC104S:

<PARAM NAME="ExtraProfile" VALUE="ENEDIS,SGCC"/>

 New parameter ExtraProfile for T300 v2.8 for IEC101S:


IEC101S

 For the generation of the setup the following dlls are been used:
• • libSaitel.dll 8.2.0.0
• • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder v01.07.01



92
Internal
 New Parameter “NO_SEND_CLASS1_WHEN_NO_CLASS2” to disable sending Class1
data when no Class2


 New functionality for SGCC profile.


IEC104S
 For the generation of the setup the following dlls are been used:
• libSaitel.dll 8.2.0.0
•
 •
ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compatible with Easergy Builder 1.7.1


 Implemented functionality for the new SGCC profile.


Easergy Builder_1.7.1.0

Easergy Builder_1.7.1.0
Binary file Release module
Easergy Builder.data Easergy_Builder_01.07.01
cilo_SPlugin.msi Cilo_01.01.01
CLAQ_SPlugin.msi CLAQ_01.01.07
DNP_Master_SPlugin.msi DNPM_01.02.06
DNP_Slave_SPlugin.msi DNPS_01.02.08
IEC101_Master_SPlugin.msi IEC101M_01.02.05
Host IEC101_Slave_SPlugin.msi IEC101S_01.02.03
IEC103_Master_SPlugin.msi IEC103M_01.00.10
IEC104_Master_SPlugin.msi IEC104M_01.02.06
IEC104_Slave_SPlugin.msi IEC104S_01.03.06
IEC61850_SPlugin.msi IEC61850_01.01.25
IsaGRAF.msi ISAGRAF_01.00.02
IsaGRAF5_SPlugin.msi ISAGRAF5_01.01.01
LAQ_SPlugin.msi LAQ_01.02.04

93
Internal
 Lioc_SPlugin.msi Lioc_01.01.10
ModBus_Master_SPlugin.msi MDBM_01.01.05
ModBus_Slave_SPlugin.msi MDBS_01.00.15
SEPAM_SPlugin.msi SEPAM_01.01.03
SOE_SPlugin.msi SOE_01.01.05
ATS_SPlugin.msi ATS_01.00.12
SNMPM_SPlugin.msi SNMPM_01.00.07
CMON_SPlugin.msi CMON_01.00.18
ZIGBEE_SPlugin.msi ZIGBEE_01.00.07
ESD_SPlugin.msi ESD_01.00.04

Easergy Builder

 Based in Easergy Builder_1.6.3

 Strings table in coreDB
 Joined T300 profiles 2.9 and 2.10 in 1 called 2.8
 SGCC encrypt type cannot be set when UDP channel
 Group alarm output signal can be set as input of itself.
SNMPM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Manage sensitive data for T300 profiles 2.7.

SEPAM

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0

94
Internal
 • ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Compiled with .net framework 4.6.1

 Fixed: When a new sepam device is created, the attributes "MAX_RTU" and "MAX_POLL"
are 0 and RTU boot fails

ESD

 For •thelibSaitel.dll
generation of the setup the following dlls are been used:
8.2.0.0
• ForwardSoftware.Windows.Forms.SharedImageLists 1.0.0.0

 Fixed: In the group box configuration, if max rank is negative, then plugin crashes.
 If a tag is being modified, the update status button is now enabled.

95
Internal