JET DIFFUSER
CB Ball Spout
Jet Diffuser
ASLI CB Ball Spout Jet Diffuser provides
ventilation to places where distribution of air via
ceiling diffuser is not possible or practical. In a
big open space area where ceiling outlets are not
able to supply air uniformly to the corners, CB
will be a solution. Air is supplied into the space
at high velocity with high induction causes the
supply air to mix with the room air effectively.
Due to its pleasant appearance, it can be used in
the large room such as concert, airport, theatre,
museum etc.
Materials Surface Finish Standard Sizes Unit : mm
Nozzle : Aluminum. Baked white powder 100 / 125 / 150 / 160 / 200 / 250
Face : Aluminum. coated as standard. 315 / 350 / 400 / 500 / 630
Features Accessories
• Easy adjustment.
C1 Radial fan blade damper
• Directional air flow pattern: +/- 30˚ deflection, 360˚ rotation. HDR-T Round volume control
• Suitable for exposed ductwork or surface mounted. damper
• Suitable for wall installation.
• Low noise levels.
• Low pressure requirement.
• Provides high terminal velocity, long distance throw and supply air into inaccessible area.
CB Physical Dimension Unit : mm
Top View Section View
Size N F Z H A D W
100 98 138 44 74 5 108 118
125 123 171 61 88 9 133 143
150 150 198 74 102 12 160 170
160 157 210 80 113 12 167 177
200 198 263 105 121 12 208 218
250 248 312 125 152 12 258 268
315 311 390 165 202 21 321 331
350 347 433 186 205 30 357 367
400 396 490 210 233 27 406 416
500 495 610 260 265 45 505 515
630 630 702 338 305 40 640 650
All stated specifications are updated at the printing date and
subject to change without notice or obligation. The actual product CB 01
might differ from pictures shown.
JET DIFFUSER
CB Ball Spout Jet Diffuser
CB Suggested Specification
Directing air downwards Directing air upwards
Directing air towards left Directing air towards right
CB-A Ball Spout Diffuser shall be suitable for throw of 20 meters distance with optimum acoustic properties. The nozzle
shall consist of a face circular mounting flange with aerodynamically shaped nozzle formed in one piece and no obstacle
in the airflow pathway. The rear connection element shall have a peripheral gasket for mounting on to the duct wall. The
flange shall be detachable from the nozzle with simple tools. The nozzle shall be adjustable with 30-degree deflection in all
direction and 360 degree rotation from the face of the diffuser without using any tools. The nozzle and installation flange
shall be aluminum. The diffuser shall be epoxy coated and furnished to architectural requirement.
All stated specifications are updated at the printing date and
CB 02 subject to change without notice or obligation. The actual product
might differ from pictures shown.
JET DIFFUSER
CB Ball Spout Jet Diffuser
CB Air Flow Performance Data
Nozzle Vel
3.0 5.0 7.0 10.0 13.0 15.0 17.0 20.0
Size (m/s)
(mm) Tot Press
0.5 1.7 3.0 6.5 10.5 13.5 17.0 21.0
(mmAq)
CMH 16 27 38 55 71 82 93 109
100 Throw (m) 1.9 4.4 5.2 7.8 8.5 10.0 11.0 12.5
NC - - - 20 24 29 33 35
CMH 32 53 74 105 137 158 179 210
125 Throw (m) 2.9 4.8 5.9 8.7 10.5 13.2 14 17.2
NC - - - 21 25 30 34 36
CMH 54 90 127 181 235 271 308 362
160 Throw (m) 3.5 5.5 7.1 11.2 13.5 17.6 19.5 21.0
NC - - 20 23 26 31 35 38
CMH 94 156 218 312 405 468 530 624
200 Throw (m) 4.7 7.8 10.5 15.1 19.5 22.5 25.4 30.1
NC - - 22 24 30 35 39 42
CMH 133 221 309 442 574 663 751 884
250 Throw (m) 5.8 8.7 12.5 16.4 20.5 26.7 28.2 33.0
NC - - 24 27 32 37 42 44
CMH 231 385 539 770 1001 1155 1309 1540
315 Throw (m) 8.0 10.9 15.3 21.0 27.8 33.0 37.9 40.5
NC - 23 27 30 35 40 44 47
CMH 374 624 873 1247 1621 1871 2120 2494
400 Throw (m) 9.0 13.5 18.7 29.3 34.7 39.0 45.0 51.0
NC - 25 30 34 40 44 48 51
CMH 573 956 1338 1912 2485 2867 3250 3823
500 Throw (m) 10.3 15.2 22.4 32.0 40.5 43.0 51.0 55.0
NC - 27 32 37 44 50 54 57
CMH 969 1615 2261 3231 4200 4846 5492 6461
630 Throw (m) 12.8 20.6 28.7 38.9 43.2 48.5 56.7 62.0
NC 26 31 36 45 53 56 59 63
• Throw is based on terminal velocities of 0.25m/s
• NC value is based on a room absorption of 10dB, re 10-12 watts
• Dash (-) in space indicates NC value less than 20
Angle of Discharge 0° 30°
Tot. Press 1 1.2
Throw 1 0.85
NC 0 2
Example: If angle of discharge is 30°, to obtain the total pressure drop, use a multiplier of 1.2, for throw use a multiplier of 0.85, for NC values, it will be NC
plus 2.
CB Order Code
Model Material Size
100 / 125 / 150 / 160 / 200 / 250
CB A
315 / 350 / 400 / 500 / 630
Example : CB - A - 400
All stated specifications are updated at the printing date and
subject to change without notice or obligation. The actual product CB 03
might differ from pictures shown.
