IWWWE

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 5

QUESTION BANK FORMAT

VIGNAN’S INSTITUTE OF INFORMATION TECHNOLOGY (A): VISAKHAPATNAM


III B. tech – II Semester (VR21) Question Bank MID-II Portion JUNE, 2024
Name of the Faculty: K. Sree Sandhya Subject Code: 1001204135
Name of the Subject: Industrial waste and waste water engineering
Designation : Assistant Professor
Experience : 1-year Phone No: 7386280880
E-mail : sree969@vignaniit.edu.in Date of the Exam:
UNIT-3 PART-A
Level of Mark
Q. No Short Answer Questions Bloom CO s
Taxonomy (2M)
What is the basic difference between Screening and
1 filtration L2 CO2 2M

What is Waste Volume reduction? CO2 2M


2 L2
Write any two effects of Heavy metals L2 CO2 2M
3
What do you mean of Proportioning of Industrial waste L2 CO2 2M
4 water

What is meant by Stabilization waste of water L2 CO2 2M


5
Write the objective of neutralization of waste water. L2 CO2 2M
6
Write the Names Any 5 heavy metals L2 CO2 2M
7
Write a short on Equalization of Industrial waste water L2 CO2 2M
8
Give examples of some water-borne diseases. L2 CO2 2M
9
UNIT-3 PART-B
Mark
Level of
s
Q. No Descriptive Questions Bloom CO
(10
Taxonomy
M)
What is the necessity of Neutralization in Industrial waste L2 CO3
A treatment? Explain the working of the same with suitable 5M
1 examples.

What are health effects due to arsenic and mercury? CO3


B L2 5M
Explain how sampling is done for industrial wastewater CO3
A and how it is preserved for analysis? L3 5M
2
Give the characteristics of Heavy Metals and write any 5 CO3
B L2 5M
heavy metal names?
What is the toxicity of industrial effects due to lead and CO3
A L2 5M
zinc?
3
What is volume reduction? List and explain any four CO3
B L3 5M
methods of the volume reduction in industrial wastewater
Write an essay on heavy metal poisoning and their CO3
A L3 5M
prevention with a suitable example
4
Explain the necessity of equalization and proportioning for CO3
B L2 5M
industrial waste water treatment.
UNIT-4 PART-A
Level of Mark
Q. No Short Answer Questions Bloom CO s
Taxonomy (2M)
What is meant by Eutrophication. CO2
1 L2 2M
What are the limitations of CETP L2 CO3
2 2M
Necessity of CETP L2 CO2
3 2M
What is the Density of sea water? L2 CO3
4 2M
Define the term Oxygen Sag Curve L>2 CO2
5 2M
What is prime lake pollutant? L2 CO2
6 2M
Define the term Effluent L2 CO2
7 2M
8 Give examples of onsite sewage disposal system. L>2 CO2 2M
What is the Best method for dispose the waste in to the L>2 CO2
9 oceans? 2M

The tolerance limit of COD of sewage to be discharged in L2 CO2


10 sea water? 2M

What are the common methods used for disinfection in L2 CO3


11 waste water treatment plants? 2M

What are the standards of the dilution factor? L2 CO2


12 2M
What is the intermediate zone composed of in aerobic- L2 CO2
13 anaerobic ponds? 2M

How are suspended solids removed from the soil? L2 CO2


14 2M
What is the most common used coagulant in the L2 CO2
15 purification of waste water? 2M

The minimum depth to which sewage should be L2 CO2


16 discharged of sea water? 2M

UNIT-4 PART-B
Mark
Level of
s
Q. No Descriptive Questions Bloom CO
(10
Taxonomy
M)
Explain with the Neat flow diagram a working of a CEPT.
A What are the situations in which it is used? L3 CO4 5M
1
B List the problems associated to dispose the industrial waste L2 CO3 5M
into water bodies.

Discuss the most common operational problems along


A with their trouble shooting methods in CETPs L3 CO4 5M
2
How does the self-purification of stream occur when it has
B been polluted by discharge of waste in it? L2 CO3 5M

State the standards to be fallowed before disposing the CO3


A L3 5M
industrial waste into water bodies
3
What are the stages involved in the Effluent treatment CO3
B L2 5M
process?
Describe the problems faced due to improper management
A L3 CO4 5M
of CETP.
4
What are the factors affecting self-purification of polluted CO3
B L2 5M
streams? Give suggestions to control.
Explain with the land treatment process and how to select CO3
A a land for agriculture? L2 5M
5
List the problems associated with irrigation farming and CO3
B explain the concept of sewage sickness with a neat sketch. L3 5M

Discuss the most common operational problems along


A with their trouble shooting methods in CETPs L2 CO4 5M
6
Write down the functionality of the skimming tank, CO3
B detritus tank and grit chambers with a neat sketch. L3 5M

State the standards to be fallowed before disposing the L2 CO3


A 5M
industrial waste into water bodies
7
Explain the ecological imbalance caused by the discharge L2 CO3
B 5M
of effluents in the ocean.
Describe septic zone recovery zone and decomposition CO3
A L3 5M
zone in detail.
8 Write a case study on rivers and what are the factors CO3
B affecting self-purification of polluted rivers? Give L2 5M
suggestions to control.

UNIT-5 PART-A
Level of Mark
Q. No Short Answer Questions Bloom CO s
Taxonomy (2M)
What are the treatment methods of liquid waste from L2 CO3
1 Tanneries? 2M

What are the different characteristics of sugar industry L2 CO2


2 effluent 2M

Enumerate the effects of wastes generated from L2 CO2


3 pharmaceutical plants 2M

What are the by-products of Sugar Industry? L2 CO3


4 2M
What is the name (Term) from wastewater from different L2 CO2
5 sources like bathrooms, kitchens and wash basins? 2M
What is the tolerance limit of BOD of sewage to be L2 CO2
6 disposed on land? 2M

Give a brief note on sources of wastewater from sugar L2 CO3


7 industry 2M

What are the pollutants that demand special attention in L2 CO3


8 treatment of fertilizer industry? 2M

What are homogenous and heterogeneous industries with CO3


9 examples L2 2M

Write any two different characteristics of dairy industry


10 effluent L2 CO3 2M

UNIT-5 PART-B
Mark
Level of
s
Q. No Descriptive Questions Bloom CO
(10
Taxonomy
M)
Discuss in detail, the treatment methods needed for the L3 CO3
A wastewater generated from Fertilizers. 5M
1
What are various methods adopted for Color removal in L3 CO3
B Paper and Pulp industry? Explain in detail. 5M

Write the major chemical composition of waste water L2 CO3

A
obtained from milk industry and explain the process used 5M
for treatment.
2
Explain the process that can be adopted in a tannery for L2 CO3

B
reduction in the usage of water. How can water be reused 5M
in a tannery?

Discuss the optimized design of waste water treatment L2 CO3


A systems applied to paper and pulp industries. 5M
3
Discuss briefly the manufacturing process pharmaceutical L3 CO3
B 5M
plants?
Explain the manufacture process involved in a sugar L3 CO3
A 5M
industry with the help of flow sheet diagram.
4
Write a detailed note on the treatment methods suitable for L3 CO3
B 5M
the Textiles industry.
In brief discuss any three issues concerning waste water L3 CO3
A 5M
disposal to the environment.
5
Discuss briefly the manufacturing process steel plants with L3 CO3
B 5M
the help of flow sheet diagram.
Write a detailed note on effects and treatment methods of L2 CO3
A 5M
liquid waste from food processing industries.
6
Explain the process that can be adopted in distillers for L2 CO3
B 5M
reduction in the usage of water.
Name any three homogenous Industries and Explain the
A L2 CO4 5M
advantages of establishing a CEPT.
7 Name few industries that can be converted into green CO3
B Industries and Explain the effect of their Effluents on river L3 5M
water
8 A What are the basic treatment processes those companies L2 CO3 5M
should follow for waste disposal with examples?
Write a case study on industry that converted its method of CO3
B manufacturing to reduce the effluent waste for a better L3 5M
environment.

Name & Signature of the faculty Signature of HoD

You might also like