Scribd
Upload
5 views9 pages

Home Automation

project

Uploaded by

Aryan Tejan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views9 pages

Home Automation

project

Uploaded by

Aryan Tejan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Name:- Aryan Tejan

DELHI TECHNOLOGICAL UNIVERSITY

Internship project
Voice control home automation

7678464721
[email protected]
INDEX:-
 INTRODUCTION
 IFTTT
 ADAFRUIT
 COMMANDS
 USE OF RELAY
 PROCESS
 INPUT/OUTPUT
INTRODUCTION
In this project we are going to design a voice control
home light using ADAFRUIT and IFTTT(If This Then That)
IFTTT (If This Then That) offers us to create a logic statement to
trigger on internet from anywhere in the world.

 It is a software platform that connects devices and apps , services


from different developers or platform in order to trigger or
execute one or more automations involving those apps, devices
and services.
 We will use IFTTT to connect google assistant which will convert
our voice command into texts ,and then send it on the internet
i.e. cloud
STEPS
1. First we will create a account on IFTTT.
2. Then we can use google assistant program in dashboard to
write a conditioned if else statement

3. Now we will connect this to our google id and adafruit.

CONCLUSION
We used IFTTT to process the command from human logic to
machine command on internet using cloud
ADAFRUIT-IO; offers us a cloud platform i.e. IO which helps us
simulate a processor and a bulb ,it is used to show the output.
We can program a light source in adafruit’s dashboard in way it
gives us output on a particular command for example

RED = SWITCHED OFF =0


GREEN= SWITCHED ON =1
AND DASHBOARD VIEW
In practical we can just use a processor to turn on a light as
it has higher potential energy requirement so we use a
relay to provide enough power supply

An Actual Relay CIRCUIT DIAGRAM OF RELAY

 The process we used in home


automation
Input 1 (we first need to connect IFTTT to Google
home)

Output1
Input 2

Output 2

You might also like