1 2 3 4 5 6 7 8
A A
180
300 450 0 45 300 300
25 0
0
L1 L2 L3
B 250 B
M1
250A TP MCCB 25KA
MAIN INCOMER METERING SECTION
ON ON
BUSBAR
250 C C
START STOP START STOP
1. PHASE - 30X10 MM AL
A/M A/M
A 15HP STAR DELTA STARTER - 1
B 15HP STAR DELTA STARTER - 5 A 2. NEUTRAL - 30X05 MM AL
B ON U ON
B
LEGENDS
L START STOP
S START STOP L 1. L1 -R PHASE LAMP
C 250 E
A/M
B
A/M
E
1325 15HP STAR DELTA STARTER - 2 15HP STAR DELTA STARTER - 6 1325 2. L2 -Y PHASE LAMP C
A 3. L3 -B PHASE LAMP
A ON
R
ON
A 4. L4 -MCCB ON INDICATION
L START STOP START STOP
L 5. M1 -DIGITAL MULTI
A/M
S A/M
250 L 15HP STAR DELTA STARTER - 3 15HP STAR DELTA STARTER - 7 L
FUNCTION METER
E ON ON
E
Y START STOP START STOP
Y
A/M A/M
250 15HP STAR DELTA STARTER - 4 15HP STAR DELTA STARTER - 8
D D
75
EARTH STRIP
FRONT VIEW
E E
CONSULTANT: IMS
Mfg:-
PROJECT: CLIENT: AI R
.S POWER CABLE ENTRY : TOP/BOTTOM
G AL ARRANGEMENT DIAGRAM STARTER
CONTROLS E
N
PANEL
PAINT SHADE: - SIEMENS GREY RAL-7035 E
TITLE: R
JOB No. RSPC.-2024-25
REGD OFFICE:TA-272/5,TUGHLAKABAD DRG No. RSPC- 000/2024- SCALE N.T.S
EXTN 25
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
1 2 3 4 5 6 7 8
A A
3PH ,4W,415V AC,50Hz 300A TPN ALUMINUM BUSBAR(MAIN BUSBAR)
B B
250/5 CT
CL1,5VA
M1
250A TP
C 25 KA MCCB C
L1 L2 L3
6A SP
MCB
D D
15HP STAR 15HP STAR 15HP STAR
DELTA DELTA DELTA
MAIN INCOMER STARTER 1 STARTER 2 STARTER 3
E E
CABLE ENTRY : TOP/BOTTOM
PAINT SHADE: - SIEMENS GREY RAL-
PROJECT: CLIENT: AIIMS Mfg:- TITLE 7035
CONSULTANT: R.S POWER CONTROLS :
SINGLE LINE DIAGRAM -
1 STARTER PANEL
JOB No. RSPC.-2024- N.T.S
REGD OFFICE:TA-272/5,TUGHLAKABAD EXTN DRG No. RSPC- 000/2024-25 25
SCALE
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
1 2 3 4 5 6 7 8
A A
3PH ,4W,415V AC,50Hz 300A TPN ALUMINUM BUSBAR(MAIN BUSBAR)
B B
C C
D D
15HP STAR
15HP STAR 15HP STAR 15HP STAR
DELTA
DELTA DELTA DELTA
STARTER 4
STARTER 5 STARTER 6 STARTER 7
E E
CABLE ENTRY : TOP/BOTTOM
PAINT SHADE: - SIEMENS GREY RAL-
PROJECT: CLIENT: AIIMS Mfg:- TITLE 7035
CONSULTANT: R.S POWER CONTROLS :
SINGLE LINE DIAGRAM - 2
STARTER PANEL
JOB No. RSPC.-2024-25
REGD OFFICE:TA-272/5,TUGHLAKABAD DRG No. RSPC- 000/2024- SCALE N.T.S
EXTN 25
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
1 2 3 4 5 6 7 8
A A
3PH ,4W,415V AC,50Hz 300A TPN ALUMINUM BUSBAR(MAIN BUSBAR)
B B
C C
D D
15HP STAR
DELTA
STARTER 8
E E
CABLE ENTRY : TOP/BOTTOM
PAINT SHADE: - SIEMENS GREY RAL-
PROJECT: CLIENT: AIIMS Mfg:- TITLE 7035
CONSULTANT: R.S POWER CONTROLS :
SINGLE LINE DIAGRAM - 3
STARTER PANEL
JOB No. RSPC.-2024-25
REGD OFFICE:TA-272/5,TUGHLAKABAD DRG No. RSPC- 000/2024- SCALE N.T.S
EXTN 25
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
1 2 3 4 5 6 7 8
GENERAL NOTES:
A A
A. FABRICATION/PAINTING
1. ALL DIMENSIONS ARE IN MM.
2. THE PANEL BOARD SHALL BE CUBICAL DESIGN, UNIFORM DEPTH, SINGLE FRONT TYPE,
COMPARTMENTALIZED, DUST AND VERMIN PROOF.
3. THE PANEL BOARD SHALL BE SUITABLE FOR STAND MOUNTING AS MENTIONED IN G.A. DRAWING.
4. THE PANEL BOARD SHALL BE FABRICATED AS
A) LOAD BEARING MEMBER SHALL BE 2.0 MM THICK CRCA SHEET.
B) NON LOAD BEARING MEMBERS SHALL BE 2.0 MM. THICK CRCA SHEET.
B C)GLAND PLATE SHALL BE 2.0 MM THICK. B
1. THE BASE CHANNEL SHALL BE OF ISMC 75x40x5MM.
2. ALL CABLE ENTRIES IN THE BOARD SHALL BE FROM TOP AS MENTIONED IN G. A. DRAWING.
3. THE DEGREE OF PROTECTION OF PANEL BOARDS SHALL BE AS UNDER
A)INDOOR TYPE : IP--42
B)CAPACITOR PANEL : IP--42
C)OUTDOOR TYPE : IP=55
4. THE BOARD SHALL BE TEXTURE FINISH POWDER COATED WITH STRUCTURE SIEMENS GREY SHADE RAL-7035
C & BASE FRAME SHALL BE BLACK (PAINT THICKNESS 60-80 MICRON)
9. C
SHEET METAL WORKS SHALL BE PROCESSED WITH SEVEN TANK PROCESS.
B. ASSEMBLY / SHROUDING
10. THE PANEL BOARD SHALL BE SUITABLE FOR 3PHASE, 4WIRE 415V+10%, 50HZ:3%, AC SUPPLY SYSTEM.
11. BUS BAR SHALL BE AS MENTIONED IN GA. DRAWING & SHALL BE INSULATED
WITH RED, YELLOW, BLUE AND BLACK COLOUR HEAT SHRINKABLE PVC SLEEVES
12. EARTH BUS SHALL RUN THROUGHOUT THE LENGTH OF THE PANEL AT THE BOTTOM OF THE PANEL AS PER GA DRAWING
13. ALL BUS BAR SUPPORTS SHALL BE OF SMC/DMC CAST AND PROVIDED AT SUITABLE INTERVAL.
D
14. EACH FEEDER SHALL SE PROVIDED WITH INDIVIDUAL INSCRIPTION PLATE MADE OUT OF BLACK ANODIZED D
AL,/POLYCARBONATE SHEET WITH ENGRAVED / PAINTED LETTERS.
15. SHROUDING SHALL BE DONE WITH (HYLAM)/POLYCARBONATE,
16. TPN MCCB MEANS TP MCCB WITH REMOVABLE TYPE NEUTRAL LINK
17. POWER SWITCHES/ MCCB's WILL BE PROVIDED WITH DOOR OPERATING MECHANISM, DOOR INTERLOCK AND PADLOCKING
FEATURE
18. ALL MCB's SHALL BE MOUNTED IN SIDE THE PANEL WHICH CAN BE OPERATED AFTER OPENING THE FRONT DOORS.
19. SELF ADHESIVE TYPE GASKET SHALL BE PROVIDED INSIDE THE DOOR TO MAKE IT DUST PROOF.
E
E
CABLE ENTRY : TOP/BOTTOM
PAINT SHADE: - SIEMENS GREY RAL-
PROJECT: CLIENT: AIIMS Mfg:- TITLE 7035
CONSULTANT: R.S POWER CONTROLS :
NOTES
STARTER PANEL
REGD OFFICE:TA-272/5,TUGHLAKABAD EXTN DRG No. RSPC- 000/2024-25
JOB No. SCALE RSPC.-2024-25 N.T.S
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
1 2 3 4 5 6 7 8
20. THE MINIMUM CLEARANCE IN MAIN BUS BAR (HORIZONTAL/VERTICAL) SHALL BE AS FOLLOWS
A
A)BETWEEN PHASE TO PHASE - 32MM A
B) BETWEEN PHASE TO NEUTRAL - 32MM
C) BETWEEN PHASE TO EARTH - 32MM
D) BETWEEN NEUTRAL TO EARTH - 26MM
C.WIRING
21. ALL CONTROL WIRING SHALL BE DONE WITH WIRE OF 1100/ 660V AS UNDER:-
B
A)AC CONTROL CIRCUIT : 1.5 SQMM CU. FLEXIBLE WIRE. (BLACK COLOUR )"
B B)AC POWER CIRCUIT MIN : 1.5 SQMM CU. FLEXIBLE WIRE. (R-PHASE,Y-PHASE.B-PHASE & NEUTRAL)
(RED.YELLOW.BLUE & BLACK COLOUR)"
C) AC CURRENT CIRCUIT : 2.5 SQMM CU. FLEXIBLE WIRE (BLACK COLOUR)(METERING/PROTECTION)
D) AC VOLTAGE CIRCUIT : 1.5 SQMM CU. FLEXIBLE WIRE (BLACK COLOUR)"
E) EARTH WIRE CIRCUIT : 2.5 SQMM CU. WIRE (GREEN COLOUR)
22. ALL DOOR SHALL BE EARTHED WITH 2.5 MM GREEN COLOUR FLEXIBLE COPPER WIRE.
23. ALL CT's CONNECTION FOR METER's / RELAY SHALL BE THROUGH CT SHORTING TERMINALS.
C
24. MINIMUM 10% EXTRA CONTROL TERMINALS SHALL BE PROVIDED FOR FUTURE PURPOSE. C
D.TESTING
25. FOLLOWING TEST SHALL BE CARRIED OUT ON COMPLETION OF PANEL
A)MEGGER TEST
B) HIGH VOLTAGE TEST
C) C.T.SECONDARY CURRENT INJECTION
TEST. D)OPERATIONAL TEST
D
D
E
E
CABLE ENTRY : TOP/BOTTOM
PAINT SHADE: - SIEMENS GREY RAL-
PROJECT: CLIENT: AIIMS Mfg:- TITLE 7035
CONSULTANT: R.S POWER CONTROLS :
NOTES
STARTER PANEL
REGD OFFICE:TA-272/5,TUGHLAKABAD EXTN DRG No. RSPC- 25
000/2024-
JOB No. SCALE RSPC.-2024-25 N.T.S
REV No. RIVISION WORKS:PLOT NO 11,12,STREET NO 11,SARURPUR INDUSTRIAL DRN RAVI KUMAR 28-07- SHEET No.
DATE DRN
AREA . 24
