Scribd
Upload
8 views4 pages

Work Sheet 9 Testing Basic Electrical Components

Uploaded by

dbpaus11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views4 pages

Work Sheet 9 Testing Basic Electrical Components

Uploaded by

dbpaus11
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Work Sheet # 9: Testing Basic Electrical

components

Department: Engineering Section: Electronics Specialization: Electronic Instrument Maintenance


Course Name: Basic Electricity and Systems Course Code: EECIM1101
Credit Hour: 3 Week: 8 Date: 7 /Nov / 2022

ExeNAME: _______________________________________
OBJECTIVES: The student should be able to:
 Familiar with the symbol and actual electrical components
 Test and identify functionality of basic electrical components

INTRODUCTION
Resistors - is a passive two-terminal electrical component that implements electrical resistance as a circuit
element.
1. Draw the symbol of resistor:

2. Complete the table below for 5 resistors.

Resistance Reading
Color Code Coded Value
(DMM)

INTRODUCTION
Capacitor - is a device that stores electrical energy in an electric field.
PROCEDURE
Number Coded Value Capacitance
1. Draw the symbol of non-electrolytic capacitor Code (capacitance) Reading (LCR)

2. Write the number code and obtain the capacitance


based on the number code
3. Using LCR, measure the capacitance
4. Complete the table.

INTRODUCTION
TESTING ELECTROLYTIC CAPACITOR

Testing capacitor by voltage test

Charge the capacitor using

a known voltage supply.

Measure the voltage across

its terminals.

PROCEDURE
1. Draw the symbol of an electrolytic capacitor Value resistance check voltage test

2. Identify the capacitance and voltage rating of 5


electrolytic capacitors
3. Using the ohms function, test the capacitor and record the result
4. Using a 9 V battery, supply voltage across its terminal and record the voltage reading.
5. Using LCR, measure the capacitance
6. Complete the table.
TESTING FUSE WITH CONTINUITY
PROCEDURE
1. Draw the symbol of the fuse

2. Write the voltage and current rating of the


fuse
3. Check the fuse using continuity
4. Record the test results

Fuse Rating Continuity Result


test (with (good / Not
continuity?) Good)

INTRODUCTION : TESTING TRANSFORMER

PROCEDURE
1. Draw the symbol of
transformer

2. Check the functionality


of one transformer using ohms
function of a multi-meter and
record the readings below
A. Primary winding:
____________
B. Secondary winding:
____________
C. Primary to secondary:
____________

Description Max Marks Marks


Component identification and symbol 10
Resistor and capacitor coding 10
Component testing 10
Result analysis 5
Housekeeping 5
Total 40

Name of the Staff: Carla Mendoza Head of the Department : Carla Mendoza

You might also like