Control panels

X Series / XV Series
K Series / KV Series

USER
MANUAL

www.amcelettronica.com
 Index

PACK CONTENTS........................................................... 2 SYSTEM MANAGEMENT

FROM GRAPHIC KEYPAD 11
INSTALLATION.............................................................. 2
INFO TASK BAR................................................ 11
COMPLIANCE............................................................... 2
DATE AND TIME SETTING................................. 12
TECHNICAL VOCABULARY............................................. 2
KEYPAD SETTINGS........................................... 12
MANUFACTURER......................................................... 2
VOICE MESSAGE.............................................. 13
SPECIFICATIONS........................................................... 3
ARM/DISARM CONTROL PANEL........................ 14
WARRANTY................................................................... 3
ACTIVATION OF PROGRAMMED OUTPUTS........ 15
SYSTEM MANAGEMENT
FROM DISPLAY KEYPAD 4 READ EVENTS MEMORY................................... 16
ARM/DISARM AREAS/GROUPS...................................... 4 SYSTEM MANAGEMENT VIA APP 17
ARM/DISARM THE GROUPS........................................... 4 REGISTERING THE APP..................................... 17
ZONE BYPASS............................................................... 4 PAIRING THE CONTROL PANEL......................... 18
NOTIFICATIONS (QUICK READING OF NEW EVENTS)...... 5 MANAGING THE SYSTEM................................. 18
EVENTS MENU............................................................. 5 VIDEO VERIFICATION....................................... 20
SYSTEM INFORMATION................................................. 5 OTHER FUNCTIONS.......................................... 21
ENABLING INSTALLER ACCESS....................................... 6 INSTALLER SPACE............................................ 21
ENABLING REMOTE MANAGEMENT.............................. 6
CODE CHANGE MENU.................................................. 6
PROGRAMMING AND CANCELLING TAGS
(PROXIMITY KEYS)........................................................ 6
DATE / HOUR MENU..................................................... 6
ACTIVATION OF PROGRAMMED OUTPUTS..................... 7
SHORTCUT KEY............................................................. 7
TIMER MENU................................................................ 7
RESIDUAL CREDIT DISPLAY............................................ 7
TEST MENU................................................................... 8
SYSTEM MANAGEMENT VIA SMS 9
ARM/DISARM THE CONTROL PANEL VIA SMS................. 9
SYSTEM MANAGEMENT
VIA VOICE GUIDANCE (only for X-XV Series) 10

X-XV Series / K-KV Series user manual v1.0 1

 PACK CONTENTS

The cardboard box contains:

• ABS cabinet
• control panel electronic board
• transformer
• earthing cable
• fuse holder
• balancing resistors (8 of 1K and 8 of 2K2)
• screws to assemble the parts and to close the cabinet
• adhesive label with product data
• user manual

INSTALLATION

The installation manual and the programming software can be downloaded

from the website www.amcelettronica.com

• The installation must be performed to a professional standard by specialist personnel, respecting the
national plant engineering regulations
• The cables used for wiring, power supply and earthing must have adequate cross sections and be
IEC 60332-1-2 or IEC 60332-2-2 compliant
• The backup battery used must comply with the IEC 60896-21/2 and have a V0 fireproof casing

COMPLIANCE

AMC Elettronica declares that its alarm control panels comply with the requirements and provisions established
by directive 1999/5/CE and with the standards EN50131-1, EN50131-3, EN50131-6, EN50136-1, EN50136-2
(PSTN line , GSM, GPRS, LAN modules ATS3/SP3).
IMQ certification - Grade 2 - Class 2 security systems.
To ensure compliance with these standards, the control panels must be programmed as indicated in the specific
tables in the technical manual.

TECHNICAL VOCABULARY
Technical terms are sometimes used in this manual:
INPUT / ZONE = alarm device / detector
OUTPUT = device managed by the control panel that does not generate an alarm (e.g. light, irrigation, etc.)

MANUFACTURER

AMC ELETTRONICA
via Pascoli, 359 Loc. Mirovano
22040 Alzate Brianza (CO) Italy
[email protected]
www.amcelettronica.com

X-XV Series / K-KV Series user manual v1.0 2

 SPECIFICATIONS

X412 X412 V X824 X824 V X864 X864 V

ELECTRICAL SPECIFICATIONS
K4 K4 V K8 K8 V K8 PLUS K8 PLUS V
Power supply 230 VAC -15% + 10% 50Hz
Protection fuse F500mAL 250V
Output voltage 13.8 V
Voltage range 9 - 16 V
Max absorption 0.1A
Board consumption 87mA@18V~ 90mA@18V~
Max output current 1.1A
Max ripple voltage 400mV
Max battery recharge current 500mA
Back-up battery 12V 7Ah 12V 17Ah
Max load terminal current 500mA 0.9A
Power supply type (EN50131) Type A
Dimensions H = 255mm - L = 300mm - D = 88mm
Weight 1.5 kg
Temperature -10 °C - + 40 °C
Maximum humidity 75% (non-condensed)

WARRANTY

AMC Elettronica guarantees a product free from manufacturing defects.

As the product is not installed by the manufacturer and can be used together with other products not made by
AMC Elettronica, the manufacturer does not guarantee and is not responsible for damage and/or theft or other
types of problems deriving from incorrect installation and/or system configuration.

The guarantee therefore does not cover:

• improper use of the equipment
• programming errors or negligence on the part of the installer
• manipulation and vandalism
• wear of the product
• lightning, floods, fire

AMC Elettronica reserves the right to repair or replace the defective product within the established limit of 24
months. Any use other than that indicated in this manual will invalidate the warranty.
The installation must be performed to a professional standard by specialist personnel.

X-XV Series / K-KV Series user manual v1.0 3

 SYSTEM MANAGEMENT FROM DISPLAY KEYPAD
To use the user menu, enter the personal code and press the ESC key 1
within 3 seconds. Using the arrows 1 and 2 it will be possible to move
within the menu.

ENTER key: X key: 2

ARM/DISARM AREAS/GROUPS
With the system disarmed enter the personal code (default 111111). TOTAL
The screen that will appear after entering the code is that of arming (see
12345678
fig.1). After 3 seconds activation will start automatically with counting of Fig.1
the output time. During the 3 seconds before the start of the output time it
will be possible to change the AREAS to be activated, using the G keys or
the numerical ones. Fig. 2 shows an example of AREA 1 activation. The line 0=TOT 1-8=AREA
above highlights the possible selections while the line below indicates the 1-------
Fig.2
AREA(S) selected. Fig. 3 shows the activation of 2 AREAS (1 and 2) which
correspond to a GROUP (STAY).
STAY
Note: the selection of partials is step-by-step, so pressing several 12------
times the number relating to the partial turns it on and off. Fig.3
Disarming of the system takes place via a valid USER CODE.

ARM/DISARM THE GROUPS

Activation of the GROUPS using the G keys is a "quick arm", which does not require a USER CODE. Each
GROUP can be given a name and the desired AREAS can be associated. Quick arm option must be set in the
programming phase by the installer. Arming of the system using the G keys takes place in the same way as
entering with code, once a G key has been pressed, the selection can be changed within 3 seconds, otherwise
the output time starts automatically.

NIGHT In the figure it is possible to see that the GROUP

G1 G2 G3 G4
-234----
called "night" consists of 3 partials (2-3-4)

Note: when the EN 50131 option is activated it is not possible to arming the control panel when the following
anomalies are signalled: main power failure, low battery, tamper, tamper line, peripheral tamper, no gsm signal,
interconnection error between devices, inactivity (no awakening) radio devices.

ZONE BYPASS
There are 2 different ways to bypass zones: EXCLUSION and INHIBITION.
EXCLUSION (P) = Permanently; the zone will remain bypassed until it is re-included.
To re-include it, it will be necessary to use the specific menu.
INHIBITION (T) = Temporarily; the zone will remain bypassed only for arming of the system in progress.
After disarming the system, the zone will be automatically re-included.
Keypad display NO BYPASS ( - ) = Zone not bypassed, zone ready
NO BYPASS ( )= Zone not bypassed, zone NOT ready

X-XV Series / K-KV Series user manual v1.0 4 System management from display keypad
Bypass with zones not ready: during the arming procedure, the keypad shows the message “zones not
ready”, and proposes selecting 1 = include, 2 = inhibit, 3 = verify. When 3 is selected, the bypass menu is
highlighted (see figure).
Pressing X repeatedly allows selecting [01] ZONE 01
P or T (permanent or temporary exclusion) PT - - - - - - - - - - - - - - - - -

Bypass with system ready (all zones on standby): during the arming procedure, after having selected the
partitions, press the X key and then ENTER, to enter the bypass menu. The exclusion procedure is the same as
that described above.
When the system is armed with bypassed zones, FORCED arm occurs and in the event log it will be possible to
see which zones have been bypassed and in what way (P or T).

NOTIFICATIONS (QUICK READING OF NEW EVENTS)

The system offers the possibility to view the latest events directly on the keypad display. When the red LED on the
keypad lights up, the control panel is notifying that there are new events to be read. Press the "X" key to access
the reading of the new events. Events can be read after entering an enabled user code.

3 Events Fig. 1 - The system shows 3 new notifications

[ ]
Fig. 2 - When the code is entered, the system displays the notifications in
16:35 - 02/01/22 chronological order. It is possible, using the UP and DOWN arrows, to scroll
KITCHEN ALARM and read the notifications
<< NO NEW >> Fig. 3 - When all notifications have been displayed, the red LED turns off
<< EVENT >> #Exit and the message in the figure is displayed

EVENTS MENU
The system can save 1000 events, with a rotation update system. Once the recording of 1000 events is reached,
the oldest event is automatically deleted to free up space for new events. By entering the EVENTS menu it is
possible to read all the events, grouped by type.

EVENTS MEMORY EVENTS MEMORY EVENTS MEMORY

All Unread Alarms
Fig. 1 - Reading menu for all Fig. 2 - Reading menu for Fig. 3 - Reading menu for alarm
events unread events events only
EVENTS MEMORY EVENTS MEMORY EVENTS MEMORY
Anomalies Arming/Disarming Users
Fig. 4 - Reading menu for events Fig. 5 - Reading menu for Fig. 6 - User access events
related to operational errors arming/disarming system events reading menu

SYSTEM INFORMATION
The control panel has a quick menu for some general information about the system. With the control panel
disarmed, each time the "X" key is pressed, the display shows the following information in this order:
• new events menu • IP board and Internet connection status
• PSTN status • GPRS board and Internet connection status
• GSM status • Cloud connection status
• battery status • firmware version
• main power status • hardware version

X-XV Series / K-KV Series user manual v1.0 5 System management from display keypad
 ENABLING INSTALLER ACCESS
Access to the programming menu by the installer must be enabled via the personal user code. Entering the user
menu, under the item ENABLE INSTALLER ACCESS it is possible to select 1 to enable or 0 to disable the installer
to access the programming menu.

ENABLING REMOTE MANAGEMENT

To program the control panel with the PC software, the system must be enabled. There are 2 ways to program
the control panel:
1 = local programming using the connection with USB cable and USB adapter
2 = remote programming via the Internet Cloud
Using the personal User code, enter the ENABLE TELEMANAGEMENT menu, press enter and select:
0 = to disable programming via software (ONLY possible from the keypad)
1 = to enable local programming
2 = to enable remote programming via Internet
(activating this option, the App is temporarily unavailable)

ENABLE TELEMANAGEMENT
TELEMANAGEMENT Enabled 1

CODE CHANGE MENU

Entering the user menu, under CHANGE PERSONAL CODE, it is possible to change your code. It is important to
set the new code with the same character length as the previous one. In the event of an error, the system does
not allow the new code to be saved.
Note: with a MASTER code it is possible to modify all the codes of the users present in the control panel.

CHANGE CODE: USER 01

PERSONAL CODE 111111

PROGRAMMING AND CANCELLING TAGS (PROXIMITY KEYS)

A MASTER user can program the "keys" for all other users: enter the PROGRAMMING KEYS menu, confirm with
ENTER, with the UP and DOWN arrows select user, send the learning command by pressing ENTER, a time of
15 seconds will start during which the LEDs on the reader will flash, bring the tag close to the reader and when
the code is learned, the LEDs will stop flashing. The keypad will confirm successful programming on the display.

PROGRAM KEY Insert Key

User Nr 01 by 15 sec.

To delete, use the same procedure, but entering the DELETE KEYS menu. Once the user to be deleted has been
selected, press ENTER to confirm the deletion.

DATE / HOUR MENU

Through this menu it is possible to modify the DATE and HOUR of the system and to program daylight saving
time. Enter the menu, press ENTER and in the SETTING submenu, make the desired changes. Press ENTER again
to change the day of the week (1 for MON, 2 for TUE...0 for SUN). Press the right arrow to change day/month/
year/hour/minute in sequence. Finally confirm with ENTER.
By setting 1 in the SUMMER TIME menu, the control panel automatically adds or removes 1 HOUR, in the
envisaged periods.

X-XV Series / K-KV Series user manual v1.0 6 System management from display keypad
 ACTIVATION OF PROGRAMMED OUTPUTS
In this menu it is possible to ACTIVATE / DEACTIVATE previously duly
programmed OUTPUTS. Enter the menu, position on the desired output (right/
left arrows) and use the UP/DOWN arrows to activate/deactivate. ACTIVATE
The figure displays what is shown in the Menu. The outputs that can be OUTPUTS
managed are only those with 0 = deactivated and 1 = activated.
The outputs with "dash" cannot be activated because they are programmed [05] OUTPUT 05
with other functions. 0---0-------------
Once in the activation menu, use the horizontal arrow keys to switch from
[05] OUTPUT 05
one output to the other and the vertical arrows to activate or deactivate
(UP arrow = activate, DOWN arrow = deactivate) 0---1-------------

SHORTCUT KEY

The system is equipped with shortcut keys with which to perform activations (in the programming phase they must
be set by the installer).

SILENT PANIC: activated by pressing simultaneously for 2 seconds the keys G2 and G3
PANIC WITH SIREN: activated by pressing simultaneously for 2 seconds the keys G1 and G4
If there are no particular programmings, the system siren is activated.
COMMANDS ACTIVATION: holding down the corresponding number key for 2 seconds will activate the
desired command and the operation will appear on the keypad display (by commands it is meant for example
turning on lights, turning on heating etc.)

GARDEN LIGHT GARDEN LIGHT

ACTIVATED DEACTIVATED

TIMER MENU
The control panel is equipped with a timer system, to arm/disarm the system automatically, to enable/disable
outputs, to enable/disable users (time slots).
Before the system is armed automatically, the user has one minute to stop the operation by entering his code.
During this minute the keypad will emit a warning beep.
In autoarming mode, the control panel will only activate if:
• all the detectors are ready
• no anomaly
The user can stop all timed operations as follows:
• enter the user menu
• go to the TIMER menu
• press enter to modify the parameter: (0 = timers disabled, 1 = timers enabled)

RESIDUAL CREDIT DISPLAY

In the event memory it is possible to view the insufficient residual credit (default = 3€) of the SIM if it is inserted
in the control panel. In the CREDIT MANAGEMENT menu it is possible to change the default threshold.
If there is an operator not included in the preconfigured list, it is possible to add it to the list by accessing
the “TEL. provider” and “SMS provider” menu and entering the data relating to the specific mobile telephone
operator.

N.B.: not all mobile operators support this service

X-XV Series / K-KV Series user manual v1.0 7 System management from display keypad
 TEST MENU

The control panel is equipped with a test tool to be able to verify the correct operation of the system, however
AMC recommends always using a professional installer to perform the test.

The tests that can be performed are on:

• sirens
• zones
• outputs
• voice calls
• sending of messages to monitoring station

In the figure it is possible to view the screens to perform the siren test. Having entered the menu, use the ENTER key to activate and
deactivate the siren test.

TEST TEST TEST

Siren Activate? Deactivate?

The zones test is performed by counting down the breached zones; in the example in the figure there would still be 34 zones to be
tested. Each time an zone is unbalanced, the system decreases the counter and activates the keypad buzzer. It is possible to interrupt
the test at any time by pressing ENTER. This system is used to test all the zones without the aid of personnel, only one person is needed.
Interrupting the test lists any zones that are missing from the test.

ZONES TEST
Tot:34 V-stop

The outputs test involves selecting the desired output and activating it for 5 seconds. The figure shows the test screens. Use the ENTER
key to activate the output.

OUTPUTS TEST 01-output1 01-output1

Tot:17 V-start Activate? Activated (4.3.2...)

The test for voice calls will be carried out on the eighth number in the directory. The call to send the ADEMCO protocols will be made to
the first telephone number in the Contact ID list. The communicated event is the Life Test. The call is activated by pressing ENTER, wait
for the test to finish.

TEST TEST
call PSTN/GSM Contact ID PSTN/GSM

TEST TEST
Contact ID GPRS/LAN Ademco 4+2 PSTN/GSM

X-XV Series / K-KV Series user manual v1.0 8 System management from display keypad
 SYSTEM MANAGEMENT VIA SMS
ARM/DISARM THE CONTROL PANEL VIA SMS
The control panel can also be armed or disarmed by sending an SMS message as follows:

UPWD:(user code) ARM=T TOTAL ARMING

UPWD:(user code) ARM=1 PARTIAL ARMING 1
UPWD:(user code) ARM=12357 ARMING OF PARTIALS 1 - 2 - 3 - 5 - 7
UPWD:(user code) DISARM=T TOTAL DISARMING
UPWD:(user code) DISARM=2 DISARMING OF ONLY PARTIAL 2
UPWD:(user code) DISARM=125 DISARMING OF PARTIALS 1 - 2 - 5
UPWD:(user code) ARM? REQUEST THE ARMING STATUS OF THE CONTROL PANEL
ARM=0 DISARMED
ARM=T TOTAL ARMED
ARM=125 PARTIALS ARMED 1 - 2 - 5

Example of SMS composition in which partials 1 and 3 are to be activated:

UPWD:111111______ARM=13
user code space

List of commands for SMS composition:

This is the complete list of all system programming/query commands.

LOCK=ON SYSTEM RELEASE COMMAND (to allow the installer to perform remote operations)
LOCK=OFF SYSTEM LOCK COMMAND (to inhibit the installer from remote operations)
OUT.x=1 OUTPUT ACTIVATION COMMAND (“x” corresponds to the output number)
OUT.x=0 OUTPUT DEACTIVATION COMMAND (“x” corresponds to the output number)
OUT.x? OUTPUT STATUS REQUEST (“x” corresponds to the output number)
IN.x? INPUT STATUS REQUEST (“x” corresponds to the input number)

Example:
UPWD:111111 OUT.3=1 (output 3 activation command)

N.B.: Remember to always insert a space after the password

X-XV Series / K-KV Series user manual v1.0 9 System management via SMS
 SYSTEM MANAGEMENT VIA VOICE GUIDANCE
Only for X-XV Series

The control panel is able to provide information and guide the user through a voice-guided menu.
To access the voice menu it is necessary to contact the control panel by telephone:

1- Enter the telephone number of the control panel (the control panel will answer after a number of rings set by
the installer during programming) and follow the voice instructions.

2- Type in the personal code to access the main menu to act on the areas, to act on the remote commands and
to ascertain the status of the zones.
2.1- The voice communicates the status of the system (armed/disarmed). By pressing key 9, the total is armed/
disarmed. Subsequently, the voice communicates the status of all the other areas and it will be possible to arm/
disarm the individual areas by typing in the number corresponding to the area.
2.2- The voice communicates the name of the output and the status (activated/deactivated). Type in the number
of the output suggested by the guidance voice to change the status of the output.
2.3- The voice communicates if there are any open zones (not ready)

Use the # key to return to the main menu

The control panel can send audio and SMS messages relating to system alarms and anomalies (they must be
programmed by the installer).
Messages can be sent to 1/8 telephone numbers.
The user who receives the voice message can interrupt the queue of calls to subsequent numbers in the following
ways:
• using a reset code (programmed by the installer)
• using the # symbol (it must be enabled by the installer)

If during receiving of a voice message the # is dialed, the guidance voice will ask for the personal user code and
it will be possible to enter the voice-guided menu.

X-XV Series / K-KV Series user manual v1.0 10 System management via voice guidance
 SYSTEM MANAGEMENT FROM GRAPHIC KEYPAD

UNIKA is a touchscreen keypad with 5-inch screen and a thin ABS cover. Equipped with an intuitive graphic
interface it is easy to use. With just a few taps on the coloured icons it is possible to manage all the system
functions.

Fig. 1 Home
Date and time
display Arm / disarm Info task bar

Temperature
display
Reading of
events memory
Silent panic

Proximity key
Panic with siren
reading area

Technical menu Keypad

settings

Calendar settings
Microphone

Recording / listening to
voice memos
Voice reminder Command SD card slot
signal badge activation

INFO TASK BAR

In the home of the UNIKA keypad, at the top of the screen, is the system information bar which shows information
on the operating status of the control panel parameters.

power supply voltage phone line LAN

connection
control panel signal level connection to
battery mobile communication the Cloud

GREEN = Working
RED = Not working
GREY = Not enabled

X-XV Series / K-KV Series user manual v1.0 11 System management from graphic keypad
 DATE AND TIME SETTING
Tapping the CALENDAR icon on the home page, it is possible to set the date and time of the control panel.

KEYPAD SETTINGS
By tapping the KEYPAD SETTINGS icon on the home page and entering your code, the following screen will
appear from which it is possible to set certain keypad parameters.

Brightness level Audio level Screen saver Proximity key programming

With the “+” and “-” keys

it is possible to change the
brightness of the display and
the audio level after selecting
the corresponding keys.

UNIKA has a screen saver system which can be configured to highlight a photographic sequence. To configure
the presentation it is necessary to have a micro SD memory and the “SLIDESHOW” software. To prepare the
photo file, open the software and upload the desired photos. The software generates a file that must be copied
to the SD memory. Insert the SD card in the appropriate slot provided in the UNIKA keypad, holding the card
with the contacts facing the front.

With the “+” and “-” keys it is possible to modify the waiting time (in minutes and seconds) before the screen
saver starts. Once the set time has elapsed without the keypad being used, the sequence of stored photos will
start.

X-XV Series / K-KV Series user manual v1.0 12 System management from graphic keypad
If the internal RFID has been previously enabled by the installer it is possible to program the proximity key. By
tapping the TAG key, an animation will appear prompting the action of bringing the proximity key close to the
reading area. Successful programming will be signalled by an acoustic signal and a green icon. Tapping on the
bin icon, all the proximity keys linked to the user code with which the user is logged in will be deleted.

VOICE MESSAGE
Tapping the RECORDING / LISTENING TO VOICE MEMOS icon on the home will display a screen from which it is
possible to record a reminder message.

Message
listening volume

Listening to message Message recording Message deletion

When there is a new stored message, the icon with the red signal will appear. Select the icon to listen to the
message.

X-XV Series / K-KV Series user manual v1.0 13 System management from graphic keypad
 ARM/DISARM CONTROL PANEL
During the programming phase, it is possible to activate the system without requiring any code (quick arm). This
possibility must be set by the installer.

Tapping the ARM/DISARM icon

on the home screen prompts the
entering of your code. Subsequently,
the keypad will show 4 activation
GROUPS (G1, G2, G3, G4) and the
AREAS (A1, A2, A3, A4, A5, A6,
A7, A8) belonging to the relative
groups.

WHITE = Working
ORANGE = Not ready
GREY= Not enabled

Tapping on a group will arm the control panel. To activate the individual areas, it will be necessary to tap on one
of the area icons and a new screen will appear with the possibility of choosing the activation. Once the selection
has been made, confirm with the enter key.

By tapping to insert a group or area

that is not ready (orange), as soon
as the control panel is armed, it
will go into alarm. To view the non-
ready zones (detectors) belonging
to the group or area, click on the
icon in the bottom right.

A window will appear that allows

exclusion/inclusion of the individual
zones (detectors).
Once the selection has been made,
confirm with the enter key.

X-XV Series / K-KV Series user manual v1.0 14 System management from graphic keypad
 ACTIVATION OF PROGRAMMED OUTPUTS

Tapping on the COMMAND ACTIVATION icon, the list of activated (yellow) and deactivated (white) commands
will appear on the home page. Tapping the relative key activates/deactivates the command.

It is possible, during the system programming phase, to create commands under a specific code. If there are
commands of this type, the window will show on the left the icon of a keypad through which it will be possible
to enter the code to view all the associated commands.

X-XV Series / K-KV Series user manual v1.0 15 System management from graphic keypad
 READ EVENTS MEMORY

Tapping the READ EVENTS MEMORY icon on the home page prompts the typing in of your code. The list of all
the events of the control panel will appear.

Holding down the READ EVENTS MEMORY icon on the home page for 2 seconds prompts the typing in of your
code and icons will appear representing event type groups.

The READ EVENTS MEMORY

red badge icon indicates the
presence of new events not yet
read.

Alarms Anomalies / faults Arming / disarming Users access

X-XV Series / K-KV Series user manual v1.0 16 System management from graphic keypad
 SYSTEM MANAGEMENT VIA APP

AMCPlus
REGISTERING THE APP

1.1 Download the App and proceed with registration 1.2 Fill in all the required fields. Set a password
by tapping the appropriate “Sign Up” key. and press the “Sign Up” key.

1.3 A code will be

It is possible to view sent via e-mail.
the version of the App
through the appropriate
key.

1.4 Enter the code and 1.5 An e-mail 1.6 Now the App is registered and it is possible to log
press the “Sign Up” key. confirming registration in with the previously set credentials, entering them and
will be sent. tapping the “Sign In” key.

Enabling automatic login,

it will not be necessary
to enter your credentials
every time you log into
the App.

X-XV Series / K-KV Series user manual v1.0 17 System management via App
 PAIRING THE CONTROL PANEL
2.1 Click on the key “+” 2.2 Fill in all the
to add the control panels. required fields: The required fields 2 - 3 - 4 in this
section must correspond to those
entered during the programming phase
by the installer.
They are found on page 21.

1. Give your control panel a name

2. Detect the UID code via the QR code
(allow access to the camera)

3. Enter the username

4. Enter the password
2.3 Once entered, save the 2.4 The added control panel
data using the appropriate will be visible at the top of
“Save” key. the screen.

It is possible to delete or
modify the characteristics of
the control panels inserted
by pressing and holding the
icons of the control panels
themselves.

MANAGING THE SYSTEM

3.1 To access the system management, click on the control panel icon and then enter the personal code
(default 111111 - only editable from the keypad).
The control panel icon will have
different types of colour depending
on the status:
GREY: everything ok
YELLOW: problem (low battery,
no power supply, etc.)
RED: alarm

X-XV Series / K-KV Series user manual v1.0 18 System management via App
3.2 Use the appropriate 3.3 Clicking on the arrow accesses the sections where it is possible to
key to arm the system in arm/disarm the GROUPS and the AREAS, to exclude/include the ZONES
total way. and activate/deactivate the OUTPUTS.
3.4 Use the
appropriate key to
arm the individual
Group.

The names of the GROUPS, AREAS,

ZONES, and OUTPUTS can be
changed by the installer via the
control panel using the technical
code. The App will automatically
receive the new terminology.

By clicking on the
3.5 Clicking on the arrow 3.6 Clicking on the arrow it triangular icon it
The GROUPS and AREAS it is possible to access is possible to access the is possible to view
icons take on different the Areas belonging to Zones and Outputs belonging the anomalies.
colours depending on the relevant Group. to the relevant Area.
the status:

disarmed

armed

system
in alarm

open zone
or anomalies

The icons of the ZONES and OUTPUTS take on different colours depending on the status:
zone zone zone output
excluded ready in alarm deactivated
zone zone output
included not ready activated

X-XV Series / K-KV Series user manual v1.0 19 System management via App
 3.7 Clicking on the individual GROUPS, AREAS, ZONES, OUTPUTS
accesses a screen on which to assign an image (allow access to
the camera).
Clicking on the appropriate
button it is possible to view
the icons of the GROUPS,
AREAS, ZONES, OUTPUTS
on the map and act directly
from this screen.

The map can always be

viewed by rotating
the phone.

VIDEO VERIFICATION

video
zone

4.1 Clicking on the REC icon it is possible to 4.2 From the NOTIFICATIONS 4.3 By clicking on the
activate a video recording and subsequently section, by clicking on any appropriate key it is
receive it on the App. When the video is video notification, it is possible possible to download
available, a PUSH will be sent (average receiving to access the list of available the video in the photo
time 1 minute). videos. gallery of the phone.

The videos remain available on

the App for 48 hours only.

X-XV Series / K-KV Series user manual v1.0 20 System management via App
 OTHER FUNCTIONS

SYSTEM STATUS menu

Through this menu it is possible
to check the status of the control
panel: battery level, power supply,
phone line etc. The red icon
indicates an anomaly.
By clicking on the “lock” icon, the
installer is given the opportunity to
programming the control panel:

enabled installer access

disabled installer access

NOTIFICATIONS menu
Through this menu it is possible
to receive the following default
notifications: alarms and anomalies

The installer, during the programming

phase, can enable the sending of
other notifications:
- user accesses
- arming/disarming
- name of the user who
armed/disarmed the system

INSTALLER SPACE

Control panel UID

UID QR
...................................................................................................................

Control panel username .................................. Control panel password .....................................

X-XV Series / K-KV Series user manual v1.0 21 System management via App
NOTES
AMC Elettronica
Via Pascoli, 359 - 22040 Alzate Brianza (CO) Italy
[email protected] - www.amcelettronica.com

Due to the continuous improvement of its products, AMC reserves the right to modify or replace technical specifications and
information contained in this manual without prior notice.