39434ebd4735b5e3fbb10b1f246d836f85c4a0915b015326043aa5f948638124

ORDER ONLINE
www.SouthernLock.com
LOCKSMITH TOOLS
SECTION 11
Section Table of Contents Hurricane Door Kits............................ 538 Shims.......................................... 495, 530
Slim Jims............................ 495, 498, 515
I Snap-In Bridges.................................. 496
A Impressioning Tools.................... 507, 543
Software............................. 506, 511, 523
ADA Force Gauges.............................. 532 Installation Jigs & Tools..... 496–498, 511,
Spanner Keys...................................... 496
Auto Wedges....................... 502–503, 542 524–525, 532–533, 535–536, 545
Spray Paint......................................... 532
B K Spring Steel........................................ 508
Backset Markers................................. 513 Key Blocks.......................................... 496 Staking Tools...................................... 525
Ball Picks............................................ 520 Key Decoders...................................... 514 Stamping Tools................... 497, 514, 547
Belt Pick Sets...................................... 517 Key Hooks................................... 495, 539 Strike Markers............................ 513, 536
Books & Manuals........................ 505, 542 Keying Kits.......................... 494–496, 525
T
Bottom Pins................................ 493, 526 Keying Tools....................................... 537
Tap & Die Tools.......................... 508–509
Butter Bits.......................................... 545
Button Grabbers................................. 493
L Templates........................................... 536
LED Lights.................. 514, 534–535, 540 Tension Tools.............................. 521–522
C Lever Opening Tools........................... 524 Tension Wrenches............................... 521
Calipers.............................................. 523 Lever Remover Tools.......................... 513 Top Pins...................................... 493, 526
Capping Tools..................... 531, 535, 544 Lock Mounting Brackets..................... 535 Truarc Rings....................................... 509
Cap Removers..................................... 531 Lubricant.................... 497, 529, 538, 547 Tubular Lock Saws.............................. 512
Caps & Springs................................... 494 Tubular Picks...................... 514, 543–544
Car Opening Tools. 495, 498–503, 505, 515,
M Tumbler Service Kits................... 494–495
Magnifiers................................... 495, 513 Tweezers............................................. 509
539–542
Manipulation Tools............................. 512
Change Keys............................... 504, 524
Micrometers....................................... 513 U
Clip Removal Tools............................. 503
Mortising Tools................................... 536 Universal Clamp................................. 539
CodeSource Online............................. 507
Multi-Tools......................... 498, 533–534 Universal Pin Tools............................. 537
Color Coded Picks............................... 520
Compressors....................................... 504 N W
Control Keys....................................... 525 Nose Pullers........................................ 504 Wedges............................... 502–503, 542
Curved Shims..................................... 530 Work Mats.......................................... 527
Cylinder Drill Jigs....................... 511, 535 P
Cylinder Removal Tools. 512–513, 525, 547 Padlock Pick Sets........................ 518, 543 Vendors
Peg Board Hooks................................ 495 A-1 Mfg.............................................. 493
Cylinder Resetting Tools..................... 525
LOCKSMITH TOOLS
Pick Guns.................................... 522, 544 BEST.......................................... 493–494

D Pick Handles....................................... 520 Casey Tool.......................................... 495
Decoders Pick Sets............. 495, 515–517, 543, 546 CCL.................................................... 494
Key Decoders................................ 514, 545 Pin Decoders............................... 514, 531 Century Drill & Tool........................... 494
Pin Decoders........................................ 531 Pin Kits............... 525, 527–530, 538, 546 CompX....................................... 494–495
Tumbler Decoders......................... 514, 524 Pinning Blocks.................................... 496 Don-Jo............................................... 495
Desktop Dispatcher............................. 506 Pinning Chart..................................... 531 DVS.................................................... 495
Diamond Picks.................... 520–521, 546 Pinning Mats...................................... 527 Edroy Products.................................. 495
Disassembly Tools............................... 523 Pinning Stations................................. 511 Falcon................................................ 496
Dispatching Software......................... 506 Pinning Trays...................................... 531 GKL Products..................................... 496
DND Stamps....................................... 494 Pin Refill Packs................................... 531 Grobet USA........................................ 496
Door Installation Tools. 497, 524, 536, 539 Pins..................................................... 531 Hardnox............................................. 497
Door & Lock Supports......................... 497 BEST.................................................... 493 Houdini.............................................. 497
Door Opening Tools............................ 524 LAB....................................................... 526 Hudson Lock.............................. 497–522
Drill Bits...... 508–509, 511, 536, 545–546 Pliers.......................... 503, 509, 512, 544 Ilco..................................................... 523
Drill Guides........................................ 535 Plug Followers.................... 510, 525, 544 Kaba................................................... 523
E Plug Holders............................... 510–511 Keedex............................................... 524
Escape Tools....................................... 533 Plug Spinners..................................... 546 Kwikset.............................................. 525
Extractors........................... 515–516, 521 Pocket Knives...................................... 534 LAB............................................ 526–531
Punch Tools........................ 509, 512, 535 LCN.................................................... 532
F Locinox...................................... 532–533
Files.................................... 496, 508, 537 R
Lucky Line................................. 533–534
Rake Picks.................. 520–521, 539, 546
G Major Mfg.................................. 535–537
Reference Books................................. 505
Gate Closer Tools................................ 532 Morse................................................. 537
Rekeying Tools............................ 523, 525
Gateway Tools.................................... 503 Nicholson........................................... 537
Rings.................................................. 509
Graphite............................................. 497 NSP.................................................... 538
Graphite Guns.................................... 497 S Panef.................................................. 538
Safe Deposit Box Tools....................... 504 Pro-Lok...................................... 539–545
H Safe Opening Tools............................. 507 Rytan................................................. 546
Hinge Repair Tools............................. 496 Safe Repair Tools................................ 524 Schlage.............................................. 546
Hinge Shims....................................... 495 Safe Transfer Dials.............................. 524 Tri-Flow............................................. 547
Hole Saws................... 494, 512, 537–538 Screwdrivers............... 493, 495, 524, 534 Weiser................................................ 547
Hook Picks.......................... 520–521, 546 Screws................................................ 537 Young Bros. Stamp Works.................. 547
LOCKSMITH TOOLS
Prices may not reflect recent price increases or manufacturer’s surcharges ORDER ONLINE
Section 11 - 492 www.SouthernLock.com
Call, Toll Free
1.800.282.2837 LOCKSMITH TOOLS
MFG. NO LONGER IN BUSINESS #30 SET Get-A-Grip Set

LIMITED STOCK, GONE WHEN GONE! 2 each of Get-A-Grip and Mega Grip
#27 Broken Key Pullers ORDER # ITEM # PRICE
A kit of three different pullers. Spiral, 005-0425 AMF 30 SET $27.60

toothed, & hooked. Quality American
steel. Vinyl covered handles.
ORDER # ITEM # PRICE
#41 Security Multi-Driver
Most Extensive, High-Quality
005-0085 AMF 27 $35.00 Multi-Bit Screwdrivers Available.
Includes the following security bits:
CO-2 Automotive Vulcan Button Torx 9, 10; Hex 3/16, 5/32, 1/8,
9/64; Spanner 4, 6, 8, 10; Phillips
Grabber #2 and Slotted 7/32. Bits are made of S2 hardened steel.
Unique rubber loop grabs and pulls buttons. Open The handle features a 1/4" nut driver and a patented end
up a whole new world with this simple and effec- cap that keeps your stored bits secure.
tive car opener. The rubber loop grabs and pulls
most buttons even straight ones. Enters through
door jam. Use strings for alignment. 005-0600 AMF 41 $66.00
005-0440 AMF CO2 $27.50
LOCKSMITH TOOLS
A2 System Pins A4 System Pins
PRICE: $11.76 PK/100 PRICE: $11.76 PK/100
TOP PINS BOTTOM PINS TOP PINS BOTTOM PINS

ORDER # ITEM # ORDER # ITEM # ORDER # ITEM # ORDER # ITEM # ORDER # ITEM #
846-1010 1B 846-1020 11B 846-1000 0A 846-1206 1F 846-1200 0E

846-1011 2B 846-1021 12B 846-1001 1A 846-1207 2F 846-1201 1E
846-1012 3B 846-1022 13B 846-1002 2A 846-1208 3F 846-1202 2E
846-1013 4B 846-1023 14B 846-1003 3A 846-1209 4F 846-1203 3E
846-1014 5B 846-1024 15B 846-1004 4A 846-1210 5F 846-1204 4E
846-1015 6B 846-1025 16B 846-1005 5A 846-1211 6F
846-1016 7B 846-1026 17B 846-1006 6A 846-1212 7F
846-1017 8B 846-1027 18B 846-1007 7A 846-1213 8F
846-1018 9B 846-1028 19B 846-1008 8A 846-1214 9F
846-1019 10B 846-1009 9A 846-1215 10F
846-1216 11F
ORDER ONLINE Prices may not reflect recent price increases or manufacturer’s surcharges
LOCKSMITH TOOLS
www.SouthernLock.com Section 11 - 493
Fax Your Order
LOCKSMITH TOOLS 800.447.2299
Core Caps SERVICE KITS

ORDER # ITEM # PRICE Single Bitted Wafer
846-1220 21C $19.20 pk/500 Service Kit
Keyway frames, tumblers, springs,
Core Springs keys, washers, nuts & clips.
846-1225 22S $45.60 pk/500
180-9094 CHI D9094 $134.40
Ace Tumbler Service Kit

KK125 Disc Tumbler Includes pins, springs, assembly pins,
Keying Kits depth key and more. 200 pieces
per compartment, unless otherwise
Includes service tumblers, marked.
ecutcheons, master tumblers,
plug nuts, cams, stop cams, ORDER # ITEM # PRICE
lock retainers, tumbler springs, 180-0500 CHI D9630 $185.90

cylinder nuts, lock washers,
pronged washers.
200-0664 COR KK125 $156.98 PIN TUMBLER KEYING KITS
V70P-1 Pin Tumbler Kit

100 pcs. ea. 1, 2, 3 & 4 drivers
LOCKSMITH TOOLS
100 pcs. ea. 0, 1, 2, 3, 4, 5, 6, 7, 8

& 9 tumblers
250 pcs. tumbler springs
Bi-Metal Hole Saw Sets 100 pcs. tumbler retainers
50 pcs. ea. C3735 & C3738 plug
Variable Pitch Tooth, Cut 1-3/8" Deep Holes retainers
4 Piece Metal Door Lockset
Four piece set includes 1" and 605-4150 NAL V70P-1 $222.25
2-1/8" Bi-Metal Shark Tooth Hole
Saws, thread adapter and arbor.
For use on all metal doors. V70P-2 Pin Tumbler Master
ORDER # ITEM # PRICE Keying Kit
203-0001 CEN 05910 $71.80 100 pcs. ea. 2, 3, 4, 5, 6, 7 & 8
master drivers
605-4155 NAL V70P-2 $56.23
26990 Do Not Duplicate Stamp

2" Length with 1-1/16" Characters V71D-3 Disc Tumbler Keying Kit
100 pcs. ea. 00, 22, 44, & 66 tumblers
ORDER # ITEM # PRICE 250 pcs tumbler springs
280-0105 EVE-105 $66.08
605-4160 NAL V71D-3 $42.72
LOCKSMITH TOOLS ORDER ONLINE

Section 11 - 494 Prices may not reflect recent price increases or manufacturer’s surcharges
Call, Toll Free
V71D-4 Disc Tumbler Master Keying Kit KC-80 Universal Slim Jim Kit
100 pcs. ea 02,04, 06, 20, 26, 40, 42,
46, 60, 62 & 64 tumblers Unlocks over 90% of automotive door
250 pcs tumbler springs locks on the road today.
Includes the S-Hook Jim
ORDER # ITEM # PRICE which works on GM, Ford,
605-4165 NAL V71D-4 $86.87 and foreign door locks with lift buttons instructions.
427-0008 KC-80 $20.00
Peg Board Hooks

Hinge Shims
550-0072 FH72 2" Single $0.20 ORDER # ITEM # PRICE
550-0074 FH74 4" Single $0.24 227-0155 HS-060 $2.16

550-0075 FH74D 4" Double $0.52 227-0140 HS-090 $2.16
DVS
UN-DO-IT® One Way Screw
KK125 Disc Tumbler Driver Removal Tools
Set of three UN-DO-IT sizes
Keying Kit to fit all one-way screws
For rekeying and masterkeying
LOCKSMITH TOOLS
Corbin CCL wafer cam and utility ORDER # ITEM # PRICE
locks. 790-0800 DVS-800P $78.00
200-0664 COR KK125 $156.98 Edroy Products

Magni-Focuser
Adjustable comfort-design head-
band rugged construction. Auxil-
iary lens also swings up and down
for additional magnification.
Automaster Super Lock Pick Sets Regular Models
A 25 piece automotive super ORDER # ITEM # DISTANCE POWER PRICE
lock pick kit, consisting of five 255-0103 EDR-103 14" 1-3/4 $45.00
Ford rocker picks, six Chrysler
255-0105 EDR-105 8" 2-1/4 $45.00
rocker picks, six wafer picks,
six new foreign rocker picks, 255-0107 EDR-107 6" 2-3/4 $45.00
#330 tension wrench, #106 255-0110 EDR-110 4" 3-1/2 $47.40
gas cap pick tool. All 25 pieces
are made from quality tempered spring steel for long use. Auxiliary Lens Models
Packaged in a custom leatherette case with operating ORDER # ITEM # WORKING DISTANCE W/ POWER PRICE
DISTANCE AUX LENS
instructions.
255-0113 EDR-113 14" 4" 4-1/4 $47.00
255-0115 EDR-115 8" 3" 4-3/4 $54.30
427-0340 LOT-340A $179.90 255-0117 EDR-117 6" 2" 5-1/4 $47.00
LOCKSMITH TOOLS
Fax Your Order
Interchangeable
Hinge Doctor
Core Pinning Block Set
Hinge Doctor tools are specifically
Consists of pinning block that retains
designed to adjust worn or improperly
core while pinning, tamping/ejector adjusted commercial and institutional
tool & tapping plate for securing cover. hinges.
ORDER # ITEM # PRICE Adjusts Sagging Doors in Seconds
285-1141 FAL A01411 $126.00 With these Hinge Doctor Tools, you can
adjust those distorted hinges and hinge
mounting plates back to their original positions in less than one
minute with no removal of the hinge from the door.
Best of all, these tools can be used over and over!
Interchangeable HA1 For 4-1/2” x 4-1/2” Hinges
HA3 For Ball Bearing and Large Hinges
Core Keying Kits HA4 For Prison and Institutional Hinges and
Standard Spring Hinges
REPLACES 1410 KIT
A complete keying kit (A2 system) in a wood case. In-
cludes pins, wafers, spring covers, caps, key gauge, pin- 335-0001 GKL HA1 Black $97.20
ning block, pinning block set, tapping plate, ejector tool 335-0003 GKL HA3 Blue $102.60
and instructions. 335-0004 GKL HA4 Red $178.20
285-1410 FAL 1404 $572.40

HA2 Residential and
Small Format Hinge Adjuster Tool
LOCKSMITH TOOLS
335-0002 GKL HA2 Green $148.50
GKL Snap-In Bridge FOR GKL HINGE SCREWS, SEE SECTION 3 -

Used to install Adams Rite MS locks DOORS, HINGES, PIVOTS
Just push and turn with the spanner key
(below), and its installed. Includes thin
metal shims to bring the faceplate flush
with the door's surface.
335-0005 GKL B15 $11.00

Swiss Precision Round Files
Gradually tapered, cut and workable to the point.
GKL Spanner Key ORDER # ITEM # DESCRIPTION HANDLE PRICE
Used to install hole filler discs & bridges 340-0062 ZR62 6" Round NIC-2 $42.12
ORDER # ITEM # PRICE #2 Cut
335-0006 GKL SK1 $27.00 340-0064 ZR64 6" Round NIC-2 $49.08
#4 Cut
340-0084 ZR84 8" Round NIC-1 $63.84
#4 Cut
ZR62

Call, Toll Free
HARDNOX
100
The original door installation cart
- DoorJak allows one man to safely ESP Ames Door
remove, transport and rehang heavy, & Lock Support
oversized commercial grade doors
up to 750 lbs. Move from a 75 de- Firmly anchor deadbolts & knob locks in hollow
gree position to a 90 degree instal- metal doors. Flexible and adjustable thus assuring use for
lation position. Lift doors vertically, any locks requiring 2-1/8", 1-5/8" or 1-1/2" cross bores.
side to side, and in and out of true ORDER # ITEM # PRICE
plumb. Two locking rear casters and
245-0001 ODDAT1346 $11.66
urethane wheels. Cart weighs 160
lbs. and folds for convenient storage. Made in the USA.
Upright dimensions: 21"L x 28"W x 48"H
Graphite Gun
Refillable, Leak-proof, Clog-proof. Use prior
367-0001 HARDNOX DOOR JAK 100 $6,450.00 to picking or impressioning. Loosens tight
wafers & pins. Perfect for lubricating key
machine carriage shaft & wing nut studs.
Does not attract dust or chips.
50 ORDER # ITEM # PRICE
Lighter and more portable than the 360-0163 HPC-HGG $22.76

DoorJak 100 - center control lifts
doors vertically. Tilts for transport
and folds flat for storage. At 66 lbs.
it makes swift work of smaller door Bulk Graphite
LOCKSMITH TOOLS
installation jobs holding doors up to High quality, finest micro-spray refill
250 lbs. graphite. One pound can.
360-0157 HPC-GG-16 $34.08
367-0002 HARDNOX DOOR JAK 100 $1,370.00
HOUDINI
Certified Products Inc.
LMS Master Steel Stamp
4-Way Lock Lube Heavy duty steel stock, 3/8"
All purpose high-tech cleaning lubricant (9.5mm) x 5/8" (16mm) with
for extreme conditions, tough jobs. Works 1/16" (1.57mm) characters,
to -60˚ hardened and zinc plated.
• Neutralizes fingerprint acid ORDER # ITEM # PRICE
• Drives out moisture 280-0102 HPC-LMS $96.58
• Does not attract dust or dirt
• Lifts rust, dirt, grease
• Does not sling off moving parts
• Not petroleum based; never gums-up
11 oz aerosal can, 12 per carton. Deep Penetration.
Anti-Friction - Anti-Corrosion - Anti-Rust - Anti-Wear

169-1101 CER-11101 $9.87
LOCKSMITH TOOLS
Fax Your Order
CJ-34 “Carolina Roller” Multi-Tool CO-24 Big Jim™

A unique tool with hundreds of
different uses. Pull small springs - The Big Jim™ will open almost every vehicle
especially on mortise locks or knob that the Original Slim Jim™ (CO-10)
tension springs on Schlage K locks will, plus with its extended length,
or any lock where there's no room it will open additional vehicles
to use your fingers or pliers. Great to take tru-arc rings off of cyl- with linkages and bell cranks
inders and taking the caps off key-in-knob cylinders and rim cyl- deeper in the door. The Big Jim's actual size is 28.5" long.
inders. Other uses include depressing the pin to remove Corbin
and Russwin knobs and taking the wedge out of Schlage A80
cylinder locks. Particularly useful with the GMRT-88 Steering 360-0063 HPC CO-24 $27.14
Column Compression Tool and GMRR-88 Retaining Ring tool.
245-0005 CJ-34 $18.00

CO-60 Caddy Killer™
The Caddy Killer™ is similar to the Original
Killer (CO-59), but has increased height in the
CO-10 Slim Jim™ arc allowing you to enter vehicles where the the
HPC's Original Slim Jim™ has been the entry tool by which all window sits deeper inside the door. The closed-
others have been judged since its hook end of this tool sits higher, allowing you
introduction in 1967. Although to reach a large variety of different areas on the
automobiles have changed door panel.
considerably in recent years,
A: 11.25" B: 3.5" C: 6.25"
the large number of applicable
cars on the road allows the Slim ORDER # ITEM # PRICE
Jim™ to remain a necessity for 360-1260 HPC CO-60 $40.98
all auto lock specialists.
LOCKSMITH TOOLS
360-0057 HPC CO-10 $20.50 CO-61 Stretch Killer™

The Stretch Killer™, has the most universal
dimensions of all of the Under & Over car opening
CO-11 Super Jim™
The Super Jim™ is a wider version of the tools. The height of the arc is greater than the
Original Slim Jim™ (CO-10). This Caddy Killer (CO-60), but the closed-hook end
configuration has been designed to hangs lower, allowing you to reach locks that
accomodate additional automobile sit deeper in the door panel.
models, as well as expedite the entry A: 11.87" B: 3.5" C: 7.75"
time on many vehicles. The Super Jim™ the natural evolution of
a classic! ORDER # ITEM # PRICE
360-1261 HPC CO-61 $42.24

360-0058 HPC CO-11 $21.18
CO-68 Over Hook™

CO-18 Sir James™ The Over Hook™ is designed to
The Sir James™ is a deluxe
hook onto horizontal rods inside
version of the Super Jim™
(CO-11). It features pre-scribed depth the car door, including some that
graduations on its face. You will appreciate the might be located behind the window or other obstruction.
built-in note pad for recording exact opening procedures. The tool can go down, then back up, behind the window
Snap-lock protective leather handle protects valuable notes. to hook onto a horizontal rod.
ORDER # ITEM # PRICE ORDER # ITEM # PRICE
360-0059 HPC CO-18 $43.40 360-1273 HPC CO-68 $31.90

Call, Toll Free
CO-70 Super Killer™ CO-75 & CO-76 Thru Car

The Super Killer™, with its extra
Clutch™ Tools
Unlike any others on market.
length and great strength, can be
When handle of tool is pulled
used to open a wide variety of apart, hook at end of tool is
vehicles. This tool has the tallest and widest arc of all of pulled inward, causing tool to
the Under & Over tools, allowing it to get under the deep- grip or bind linkage rod.
est window and around the widest door panels. This tool
works best on vehicles with thicker doors. Two different styles are available: The Vertical Clutch™ for
vehicles with vertical linkage and the Horizontal Clutch™ for
A: 13.75" B: 5" C: 10"
vehicles with horizontal linkage.
360-1274 HPC CO-70 $44.20
360-1275 HPC CO-75 Horizontal $91.48
360-1376 HPC CO-76 Vertical $91.48
CO-71 Stretch Double "L"

HPC's Double "L" Tools are highly versatile car CO-83 The Fishing Pole
openers. With an upward hook on one leg and Shift and Shape! Twist
an outward hook on the opposite leg, they can and Turn! Flip & Flex!
easily grab and bind vertical linkages from Grip & Grab!
above or below. The hooks are laminated with
a slip resistant coating and are able to reach The Fishing Pole (CO-83) is HPC’s
around many shields. For narrow door panels, most flexible tool ever. At 7 feet long, the
use the Short Double "L" (CO-72). Fishing Pole easily reaches across almost any
car. Its bendable body can be configured to any
shape. When the handles are separated, the working end
LOCKSMITH TOOLS
360-1371 HPC CO-71 $31.04 curves and flexes up to a 90-degree angle - that you can
twist in any direction. Comes with three screw on tips
including a bendable Posi-Form Wire Loop, a Super-Pull
CO-72 Short Double "L" Catch, and a large Sure-Grip Hook. If you want to wiggle
and worm your way through quicker car opening, use a
Designed for cars with Fishing Pole!
narrow door panels.
For thick door panels, use the Stretch Double "L" (CO-71).
360-1283 HPC CO-83 $155.60
360-1272 HPC CO-72 $32.06

CO-85 Twin Hooks
Reaching across vehicles
CO-73 Lasso™ and grabbing door handles
The Lasso™ tool is for vehicle entry has never been easier. The
when the lock button is visible. It is made of high quality new HPC Twin Hooks has
"poly-flex" material with a waxed high-strength lanyard. a double-hook end that opens and
The tool allows you to actually tie the string around the closes with a simple push and pull of the tool
lock button and lift up to unlock the door. The CO-73 is handle. The two hooks overlap each other as they close
excellent for those luxury car openings where metal tools giving twice the strength and a solid hold. Twin Hooks se-
may damage the finish. curely grabs onto door handles from as far as 7 feet away.
360-1276 HPC CO-73 $21.04 360-0066 HPC CO-85 $164.76
LOCKSMITH TOOLS
Fax Your Order
CO-86 Fish Hook AKK-BC Button Clutch™ Killer Kit

The new Fish Hook tool is for vehicle entry when the lock The Button Clutch™ is a money-saving
button is visible. Used with an HPC Wedge, the tool enters point-of-purchase packaged kit that Includes:
the auto interior, engages the button and with a simple • Button Clutch™ No. CO-87
twist, raises the button. This unique design features a long • Ultimate Auto Wedge No. AW-38
reach memory-flex rod for bending to the required shape. • AutoSleeve™ No. AS-1
360-0320 AKK-BC $86.98
AVAILABLE SEPARATELY
CO-87 Button Clutch™

Similar to HPC’s patented Vertical and Horizontal Clutch™
Tools and Super Snare,this compact action tool will grab
lock buttons and not let go! Combined with an HPC Air
Wedge®, this hybrid tool will make your next auto open-
ing quick and effortless!
Two Methods of Entry: ORDER # ITEM # PRICE
• Through Car • Under Button Style 360-0315 CO-87 $72.70
CO-86 Opens:
CHEVY CHRYSLER DAIHATSU
AKK-SF Skinny Flipper™
LOCKSMITH TOOLS
DODGE FORD GEO

GMC HONDA INFINITI The Skinny Flipper™ is made
ISUZU LEXUS LINCOLN of super bouncy spring steel
MERCEDES MERCURY MITSUBISHI and the laminated body
NISSAN OLDSMOBILE PORSCHE allows you to manipulate the
ROVER SAAB SUBARU working end from outside of
SUZUKI TOYOTA VOLKSWAGEN the car. You’ll flip when you
Plus, many more! use this new HPC solution to tight door seams!
360-1265 HPC CO-86 $84.72 360-0340 AKK-SF $79.98
Don’t See What You’re Looking For?

We can special order and source products for you
QUICKLY!
Give us a call at 800-282-2837

Call, Toll Free
AKK-GF Gold Finger Killer Kit AKK-55 Starter Killer Kit

The Gold Finger Killer Kit is a sharp priced point-of-pur- The Starter Killer Kit (AKK-55) is ideal for
chase packaged kit that includes: beginners or locksmiths needing a small kit
• Gold Finger No. CO-90 for a second service vehicle.
• Original HPC Air The AKK-55 includes the Super Jim™ (CO-
Wedge® No. AW-100 11), Jim Dandy™ (CO-22), Horizontal Hook
• AutoSleeve™ No. AS-11 (CO-39), Stretch Killer™ (CO-61), and two
ORDER # ITEM # PRICE 3/8" Ultimate Auto Wedges (AW-38), all in
360-0355 AKK-GF $96.14 a clear-view plastic case.
This variety of tools will help you open many
cars using the Under Button and Under &
AVAILABLE SEPARATELY Over styles as well as attacking vertical and
horizontal rods, lazy pawls, and bell cranks.
CO-90 Gold Finger
5-foot long bendable car opening tool has two special 360-2301 HPC AKK-55 $122.50
working ends. The hook end is designed to mimic your fin-
ger action pulling levers and flipping rockers. The opposing
end is perfect for grabbing switches that must be pushed.
Bright yellow ends are easy to see in dark interiors and the AKK-66 Pro Killer Kit
super strong steel body will outlast similar tools. Pro Killer Kit (AKK-66) includes the same
tools as the Starter Killer Kit (AKK-55),
plus the Collapsible Opener (CO-6), two
360-0350 CO-90 $47.06
3/4" Ultimate Auto Wedges (AW-34),
and a Flex-A-Light™ (FAL-15), all in a
LOCKSMITH TOOLS
clear-view plastic case.
CO-91 Green Thumb Car Opener
This variety of tools will help you open
5 feet long and .275” thick. This HPC car an impressive amount of cars using the
opener is oven baked with a bright soft-touch Through Car, Under Button, and Under
protective coating that will safeguard your & Over styles, as well as attacking verti-
customer’s vehicles. They are stiff enough for cal and horizontal rods, lazy pawls, bell
pull levers and pushing switches but flexible cranks, and the GM latch.
enough to bend in the best configuration to
unlock the toughest doors. ORDER # ITEM # PRICE

360-2302 HPC AKK-66 $301.36
360-0375 CO-91 $47.06
AKK-JPTC Jam-Packed Thru Car

CO-94 Slender Bender Killer Kit
Over 4 feet long and is less HPC’s Jam-Packed Thru Car Killer Kit
an 1/8" thick. Super-flexible (JPTC) comes complete with everything
tool ideal for hard to wedge in the AKK-TC, plus the Fishing Pole, Thru
vehicles. The bright soft- Car Clutch™, Super Thru Car Clutch™,
touch protective coating will ensure that your customer's car Interactive Car Opening Authority®, and
isn't damaged as is wiggles, worms, twists, and turns its way the How-To Master Car Opening for the
into opening the tightest vehicles. The SlenderBender is so Security Specialist!
incredibly thin you may not need a wedge!
360-0030 HPC AKK-JPTC $686.82
360-2008 CO-94 $47.06
LOCKSMITH TOOLS
Fax Your Order
AK-88 Classic Killer Kit AW-100 Universal Air Wedge®

The Classic Killer Kit (AKK-88) comes in a deluxe, Slides between the vehicle door and the weather
highly durable, custom-made carrying case. This vari- stripping on the door frame. Then the pump is
ety of tools will help you open most of the cars on the squeezed, inflating the Air Wedge and separating
road today using the Through Vent, Through Handle, the vehicle door from the frame
Through Car, Under Button, and Under & Over styles, providing more than ample room
as well as attacking vertical and horizontal rods, lazy to insert a car opening tool. The
pawls, bell cranks, and the GM latch. increased width of the Universal
Air Wedge gives you a larger gripping area for inserting
Includes: the wedge into the top corner of tighter fitting doors.
• CO-6 - Collapsible Opener Equipped with a release valve.
• CO-10 - The Original Slim Jim™
• Thickness, not inflated: .08"
• CO-11 - Super Jim™
• Thickness, maximum inflated: 2.75"
• CO-18 - Sir James™
• Dimensions: 11" x 5.125"
• CO-22 - Jim Dandy™
• CO-39 - Horizontal Hook ORDER # ITEM # PRICE
• CO-55 - Ultra Jim™ 360-1210 HPC AW-100 $82.40
• CO-59 - Original Killer
• CO-60 - Caddy Killer™
• CO-61 - Stretch Killer™
• CO-70 - Super Killer™ Ultimate Auto Wedges
• (2) AW-34 - Ultimate Auto Wedge (3/4") The Ultimate Auto Wedges
• (2) AW-38 - Ultimate Auto Wedge (3/8") are designed for smooth, safe
• FAL-15 - Flex-A-Light™ insertion and will not fall
into door cavities. The special
angled tips allow for easier
LOCKSMITH TOOLS
360-2304 HPC AKK-88 $751.98 insertion and the sure-stop

edges stop you from pushing these wedges in too far.
These wedges feature a special tapered body that pre-
AKK-99 Ultimate Killer Kit vents them from popping out, and the special "illumina-
The AKK-99 includes the same tion hole" holds your probe light in place at any angle.
tools as the Classic Killer Kit Available in two popular sizes, 3/4" (19mm) and 3/8"
(AKK-88), plus: (9.5mm) maximum thickness.
• Over Hook™ (CO-68)
• Stretch Double "L" (CO-71) • The sure-stop edge prevents you from pushing these
• Short Double "L" (CO-72) wedges too far into the door.
• the Lasso™ (CO-73) • Tapered body stops these wedges from popping out.
• Instant Explorer Tool (CO-79) • The "illumination-hole" holds your light in place,
• Novice Pick Set (PIP-13) focused where you need it.
• Interactive Car Opening • Special angled ends make these the easiest wedges to
Authority® (COA-CD) slip into doors.
This is the ultimate set of tools
for Lasso, Picking, Through Vent,
Through Handle, Through Car, Under Button, and Under & 360-1334 HPC AW-34 (3/4") $24.62
Over styles of car opening. With these tools you will also be 360-1338 HPC AW-38 (3/8") $24.62
able to attack all types of vertical and horizontal rods, lazy
pawls, bell cranks, and the GM latch.
360-2306 HPC AKK-99 $1,046.86

Call, Toll Free
PW-100 Power Wedge™ AST-4 Door Panel Pad Clip Remover

An advanced vehicle opening aid Gaining access to the automobile door lock cylinder
for security professionals. requires removal of the door trim pads. Removal
without tearing out the nylon retainer clips
A revolutionary auto entry device has always been difficult. The tapered
designed to aid in opening even the end of this heavy-duty lever-type tool
most difficult vehicles. A spring loaded enters between the door and trim pad,
compound lever that safely spreads a gently removing the pad. This greatly reduces the possibility
vehicle door away from the body of tearing or damaging the pad and clips.
allowing for the easy entry of a “Through the Car” ORDER # ITEM # PRICE
opening tool. The Power Wedge slides into the opening
360-0017 HPC AST-4 $50.12
between the vehicle’s door and frame at the top of the
door. Rubber coated tips protect the vehicle, and the
adjustment knob allows you to control the width of the ALCP-10 Auto Lock Pliers
door opening. Simply turn knob clockwise and watch Remove auto lock face caps easily in seconds.
as the door slowly opens giving you room to use a car The specially machined tips grip like a vise.
opening tool. Made from 14 gauge steel. The Auto Lock Cap Pliers quickly remove ei-
ther the factory lock cap using the rolled crimp,
or the "Tab Style" replacement caps. Side cut-
360-0305 HPC PW-100 $117.36 ters and cut fingers are now a thing of the past!
When used with care, auto caps can be removed
with a minimum of distortion, allowing re-use of
the removed cap.
AW-99 Air Wedge
Unlike anything else on the market. ORDER # ITEM # PRICE
The Air Wedge slides between the 360-0011 HPC ALCP-10 $83.84
vehicle door and the weather stripping
LOCKSMITH TOOLS
on the door frame. Then the pump is
squeezed, inflating the Air Wedge and GTO Gateway Tools
separating the vehicle door from the GTO acts as a third hand to hold open the dust cover on auto
frame. This provides more than ample door locks. This allows you to have both hands free to pick
room to insert a car opening tool. The Air Wedge is made the lock or extract a broken key. Insert into the door lock,
of a sturdy vinyl and equipped with a release valve. turn in the direction the shutter opens, and the lock is ready
for service (with the gateway securely held out of the way).
ORDER # ITEM # PRICE Universal slot size covers all of the major U.S. manufacturers
360-1207 HPC AW-99 $68.58 (GM, Ford, and Chrysler), as well as many imports (BMW,
Volkswagen, Toyota, etc.).
360-1330 HPC GTO $18.86

AST-3 Automotive Door/Window
Clip Removal Tool
The Clip Removal Tool (For Door Handle and
Window Cranks) easily removes the hard to
reach retaining clips without damage.
These clips can be found on GM, Ford,
Chrysler, and various other vehicles.
360-0016 HPC AST-3 $23.24
LOCKSMITH TOOLS
Fax Your Order
HPC
SWLPC-1 Steering Column NP-4B Nose Puller for
Lock Plate Compression Kit Safe Deposit Boxes
The Steering Column Lock Plate If the lock core has been pulled and use
Compression Kit is a complete kit for of the guard key has not opened the
new style air bag columns, as well door, then it is time to apply the Door
as older models. It includes both Puller Set.
standard and metric threaded shafts Place the stepped Spacer Block
and set screws, along with a longer, onto the hook unit. The 3 different
diametered steps of .345", .562"
narrower U-bracket for air bag and and .680" make it adaptable to
telescoping columns. 3 different sizes of plug holes.
Place the correct diameter step into
The kit includes the metric internally threaded shaft the hole. Have the hook end set against the
and set screws that are required for 1978 to present on inside back wall of the door, then tighten the knurled nut to
General Motors vehicles. It also comes with a handy 9" hold the hook in place. The flat surface on the outside of the
x 12" (23 x 31cm) vinyl pouch. hook unit should be in a level position.
The long flat blade is then fitted onto the holding slot, along
Once the steering wheel is removed, simply screw the with the remainder of the Puller unit, as shown above. Posi-
center post onto the steering shaft and place the yoke tion feet away from the centers of adjacent doors, to mini-
over it. Turning inward on the center post nut com- mize the possibility of distortion. The knurled knob is then
presses the plate. This leaves both hands free to pry the turned until the door is pulled out.
wire snap-ring out of the shaft's groove. Re-installation
Packed in steel case.
of the ring after servicing is accomplished by just slid-
ing the ring down the tapered shank of the center post ORDER # ITEM # PRICE
screw and back into the groove. 360-0258 HPC NP-48 $254.36

LOCKSMITH TOOLS
360-0418 HPC SWLPC-1 $185.04

Change Key for LaGard Locks
SLC-42 Safe Change Key for Group 1 & 2 LaGard 3 Wheel
locks (2200, 2500, 3330 and 3390)
SWLPC-2 Lock Plate Compressors
(For Tilt Telescopic Steering Columns) ORDER # ITEM # PRICE
The Lock Plate Compressor is a spe- 360-0391 HPC SLC-42 $81.02

cially designed lockplate compressor
for tilt telescopic columns used on
General Motors up to 1998. It assures
easier access to ignition lock retainer Change Key for Sargent &
after steering wheel is removed. Greenleaf Locks
SLC-4 Change Key for Sargent & Greenleaf 6720, 6721,
360-0420 HPC SWLPC-2 $45.08 6722, 6723, 6725, 6726, 6730, 6732, 6735, T8410MP,
T8415MP, ET8410MP, ET8415MP locks.
360-0356 HPC SLC-4 $81.02

Call, Toll Free
MODELS INDEX
COA-22 Car Opening Authority The Model Index lists more than
HPC's Car Opening Authority® is a multifaceted us- 650 vehicle models by year for
er-friendly manual that serves not only as a reference the past 16 years. This
book, but also as an educational aid and opening index. It spreadsheet formatted index
clearly depicts and explains all of the different techniques points you to one or more
of the 13 styles of car opening. HPC's Car Opening Author- opening techniques for each
ity® shows you how to open virtually every vehicle for the vehicle and alerts you
past 16 years, including ALL of the current cars, vans and to any vehicle-specific
SUV's found in the U.S.A. and Canada, as well as many information.
from around the world.
For the beginner, HPC's Car Opening Authority® will OPENING METHODS PAGES
show you that one or more of the 13 opening methods can The 13 Opening Styles and Techniques use precise illus-
open many vehicles. Once you learn how to perform each trations to take you through all of the different opening
of these opening methods, you will learn how to identify methods. Each technique gives a list of recommended and
which techniques to apply to which vehicles. optional tools, as well as any style-specific precautions.
For the experienced car opening professional, who
knows the value of space in a work vehicle, HPC's Car TOOLS PAGES
Opening Authority® is the ideal book. Why waste valu- Picture and description of ALL of HPC's car opening tools.
able truck space with volume after volume of car opening
material? HPC's Car Opening Authority® gives you open- PLUS
ing information for over 650 vehicles all in just one binder. In an effort to keep you current with the latest car opening
issues, we include sections on Side Impact Airbags and
Also available in CD format as the Interactive Car Opening Ignition Anti-Theft Systems.
Authority® (COA-CD).
LOCKSMITH TOOLS
ORDER # ITEM # PRICE DISCONTINUED BY MFG.
360-1277 HPC COA-22 $449.38 GONE WHEN GONE
LC-1 Basic Picking & Racking

Reference Book
Describes in detail the theories and On behalf of your
techniques for picking standard pin and
Southern Lock family,
Thank You
wafer tumbler locks. All the necessary
tools - such as picks and tension
wrenches - are listed and fully
illustrated for convenient
cross-reference.
360-1230 LC-1 Basic Picking $71.80

for your business, trust,
DISCONTINUED BY MFG.
GONE WHEN GONE and loyalty!
LOCKSMITH TOOLS
Fax Your Order
DESKTOP DISPATCHER
Desktop Dispatcher Desktop Dispatcher
Works with Windows, Mac, iPhone, and iPad Syncs with iDispatcher
• Includes all the features in Lite Version
The Desktop Dispatcher is the easy to use, affordable,
• Inventory control. Automatically adjusts
dispatching software, for creating, printing, storing and
tracking any kind of service call, appointment or customer inventory levels as you use items on work orders.
list. Automatically enters descriptions and prices on work
order for you. Saves time, prevents errors
Join the growing number of companies who have increased • Invoicing, Thank you letters, Late notices, Aging
the efficiency of their service departments. Locksmiths, reports, Print envelopes, Monthly and yearly
plumbers, electricians and HVAC companies all over the world
reporting
have benefited from our affordable dispatching software. Our
easy to use, affordable software will work for any service • Proposals Store and retrieve proposals. Turn an
based business. It costs less than what you stand to loose from accepted proposal into a work order with a click of
one lost service call, and so easy to use, you could be up and your mouse.
running in a matter of minutes. • Reports on completed work. Build custom reports
Increase the efficiency of your service department and track by searching any combination of fields you want.
it's performance without having to do any extra work. Displays results in list view showing averages and
totals.
• And more!
Desktop Dispatcher Lite
• Create, print, sort and track all your service calls.
• Shows customer's service history on the screen as you Desktop Dispatcher Pro
enter a new call.
Now with equipment tracking, project management
• Saves your work automatically and creates backup copies
and more. Syncs with our new iPhone / iPad app
easily.
iDispatcher Pro.
• Unlimited number of calls.
LOCKSMITH TOOLS
• Stores and tracks completed calls and call backs.

• Includes all the features of the Regular Version
• Automatic appointment reminders.
• HVAC customers, we've heard you. Now you can
• Import and export from other programs.
create and track equipment lists with maintenance
• Shows both billing address and the job address on the
schedules, serial numbers, photos and more.
screen.
• More info at your finger tips. Our expanded
• Pop up menus included: Call Taken By, Call Given To,
customer list now shows open work orders, closed
Payment methods, Appointment Times, and others.
work orders, invoices and equipment at each
• Builds a customer database, automatically, as you use it.
location.
• E-mail your calls to your service techs.
• New mapping feature lets you plot all your open
• Free maps to any address in the U.S.
jobs on one map to more easily plan your rout.
• Get reminded of past due calls automatically when the
(requires Microsoft Excel and internet access)
calendar is opened.
• Create and manage projects that require multiple
• Record a voice memo right on the work order.
trips or multiple days to complete.
• Stamp the arrival and departure times on the work order.
• And more.
• View all the calls in a list view to see where each
technician is.
• Warns you if a call is running over the allotted time.
• New calendar screen lets you view all the appointments 845-8081 Desktop Dispatcher Lite $600.00
to make it easier to set a new appointment. You can even 845-8080 Desktop Dispatcher $1,000.00
reassign and reschedule existing appointments without 845-8082 Desktop Dispatcher Pro $1,400.00
having to switch screens.
• New screen in the customer database allows you to store DOWNLOAD A FREE DEMO
photographs and audio notes about your customer's and
their equipment. DESKTOPDISPATCHER.COM

Call, Toll Free
CodeSource® Online
arry your entire code database in the palm of your hand with HPC's CodeSource® Online. One small price gives you access
C
to all the codes you may need in a given year. Share your username and password with your entire crew and no one will have
to carry laptops or call into the shop to retrieve codes anymore.
Works on your PC, Mac, Tablets or Smart-phones, anywhere you can connect to the internet.
Enter a code and some other optional See all of the appropriate code series View your bitting and all the
information (Manufacturer and and choose the one that you are information you need to cut your key.
Application). looking for. It's really that easy!
25 Codes for $250

ASK YOUR SALES REP FOR
50 Codes for $350
MORE INFORMATION
LOCKSMITH TOOLS
100 Codes for $650
NST-6 Safe Opening Tool Kit CGIT-10 Clean Grip Impressioning

Enter through the existing spindle Tool
hole, the ends of the tools flip open
and allow you to work from the inside Holds onto the center of the
of the lock. key blank, not the face. This
eliminates the possibility of
Specifically designed to recreate cor- scratching the key blank, while
rect combination input by allowing providing a firm hold. It has a unique
you to deactivate relocking mecha-
locking mechanism with a retaining pin
nisms and draw back bolts. The ends
that ensures a tight grip on the key blank.
of the tools are like little fingers and
are designed to manipulate the inner
The cushioned handle is comfortable and easy to hold.
workings of many safe locks. This tool will hold a variety of key blanks and has been
designed to be simple, quick , and dependable - with
Quickly and easily open LaGard a professional end result. With the key blank locked in
1800 and 2100, Mosler 302 and place, you are ready to impression securely.
402, and many S&G safe locks. This kit comes complete with
6 tools and instructions in a handy roll-up case for convenient ORDER # ITEM # PRICE
storage. 360-0110 HPC CGIT-10 $188.56
360-1222 HPC NST-6 $278.30
LOCKSMITH TOOLS
Fax Your Order
FRS-4 Flat & Round Spring Steel KFS-6 Key File Set
Assortment Includes six 4" (10cm) files with
1/2 lb. (.23kg), wooden handles in plastic case.
over 50 pieces
Includes:
This spring steel
• Swiss Pattern Round-Tapered
assortment contains different sizes of the most popular flat
• Swiss Pattern-3 Square Tapered
and round spring steel. The assortment is cut into conve-
• Swiss Pattern Square-Tapered
nient 9" (23cm) lengths and is packaged in a see-through
• Swiss Pattern-Rectangular Straight
round plastic container.
• Swiss Pattern-Warding Tapered
ORDER # ITEM # PRICE • Swiss Pattern-Half Round Tapered
360-1350 HPC FRS-4 $136.44 ORDER # ITEM # PRICE
360-0218 HPC KFS-6 $72.52
RD-1 Router Bits

(Saws, Drills, Routs, Files) IFH-4 #4 Cut Impression Files w/
The Router-Drill fits any electric drill or drill press. It cuts Carrying Case
its own starting hole in any shape or direction that the tool
#4 Cut, fine impression
is moved. It has sharp milled flutes for fast cutting action
file in plastic carrying case.
that will not clog. Ideal for enlarging holes and making
Safety case protects wearer, pocket, and file!
scrolls. It cuts wood, plastics, non-ferrous metals and is
made of hardened steel for a long life. *Not for steel ORDER # ITEM # PRICE

360-0182 HPC IFH-4 $89.60
360-0312 HPC RD-1 $31.60

LOCKSMITH TOOLS
Safe Drill Bits

SHPD-12
CLT-4 Lock Case Re-Tapping Tap
SHPD-14
360-0050 HPC CLT-4 $209.78
SHPD-12 and SHPD-14 are premium quality tungsten tip
drill bits designed for multiple use on steel hardened to
Rockwell C-40 up to C-64.
These premium quality drill bits have an extra thick car-
bide tip to penetrate hardened and case hardened steel
over 45Rc/421Hb. The longer carbide tip allows it to be
CLT-5 Complete Tap & Die Kit resharpened if it gets dull. The point of the bit has a neg-
ative rake angle to reduce chipping and help disperse the
Re-thread cylinders and cases with heat from the cutting edge. High speed steel bodies and a
this full kit complete with cylinder straight flute for strength and clean chip removal.
holding fixture & metal box.
ORDER # ITEM # DIAMETER LENGTH PRICE
360-0344 HPC SHPD-12 1/4" 8" $198.70
360-0051 HPC CLT-5 $404.26
360-0345 HPC SHPD-14 3/8" 8" $214.04

Call, Toll Free
TRU-99 Convertible Truarc Ring Pliers TRU-275 Truarc Ring Assortments

Can quickly & easily convert from Contains 260 rings in 27
ring compressor (external) to ring different styles and sizes of
spreader (internal). Pliers also feature Truarc rings and retainers.
an adjustable stop that limits the jaw Made of carbon spring steel
opening for both external and inter- for long lasting tension or
nal operation.
compression. Helpful for
They can be used on internal rings
in sizes of 1/4" to 1" (6.5 to 26mm); servicing Arrow, Best, Corbin,
and on external rings 1/8" to 1" (3 to Dexter, Ilco, Lockwood,
26mm). The TRU-99 comes with 5 pairs of interchangeable National, Schlage and many
tips and a plastic case. more.
Tips Included: ORDER # ITEM # PRICE
(2) Silver .047" (1.2 mm) (2) Black .036" (0.9mm) 360-0500 HPC TRU-275 $241.86
(2) Copper .023" (0.6mm) (2) Silver 90˚
(2) Black 90˚
PTT-4 Pin Tumbler Tweezers
381-1234 HPC TRU-99 $68.04 Groove in tip provides firm,
non-twisting grip on cylinder
pins for easy loading. Tip is
TRU-123 Truarc Ring milled back so outside diameter
Compressor Pliers of a standard .115 diameter pin
extends past tip. Permits "butt-
ORDER # ITEM # PRICE ing" pin against end of plug follower when loading upper
360-0499 HPC TRU-123 $47.00 chambers, providing added control when holding tip or
LOCKSMITH TOOLS
master pins of varying lengths. 6" long.
360-0302 HPC PTT-4 $28.28

HDPS-4 Double "D" Metal Punch
& Die Sets
Punches a double "D" hole. TPT-5 Improved Pin Tumbler Tweezers
It is a necessary aid to lock- With pin pushing attachment
smiths for installing vending that makes it easier to load top
machine and cam locks on pins into a cylinder.
metal cabinets or desks, sheet
metal lockers, filing cabinets, and cash boxes made of sin-
gle wall, sheet metal of 18 gauge or lighter. The HDPS-4 360-0303 HPC PTT-5 $24.30
punches a .645" x .770" (16.4 x 19.5mm) hole in 18 gauge
(.048"/1.2mm) mild steel.
360-0162 HPC HDPS-4 $330.16 PTT-5 Compact Pin Tumbler Tweezers

4" long with milled tips firmly
grip pins.
360-0452 HPC TPT-5 $51.76
LOCKSMITH TOOLS
Fax Your Order
Adjustable Follower PLUG FOLLOWER &

Spring loaded action bar, fits all standard locks .495" to .600". HOLDER GUIDE CHARTS
Handles 90% of all locks. MANUFACTURER FOLLOWER HOLDER
ORDER # ITEM # PRICE Acrolock SUT-1 CPH-10

360-0412 HPC SUT-22 $56.02 Almont (Peanut Cyl) SUT-0 CPH-15
Arrow SUT-1 CPH-10
Corbin SUT-1 CPH-10
Corbin (Oversize) SUT-10 CPH-20
Hollow Brass Follower Set Corbin (Small Pins) SUT-0 CPH-15
This set contains three popular sizes of medium-hard, Dexter SUT-1
zinc plated, hollow brass followers. Each fits Eagle CPH-10
into the other and into their case. Eagle (Small Pins) SUT-1 CPH-15
ORDER # ITEM # PRICE Ilco SUT-1 CPH-10
360-0410 HPC SUT-14 $47.06 Ilco (4019 Rim Cyl) SUT-3
Ilco (Peanut Cyl) SUT-0 CPH-15
Keil SUT-1 CPH-10
Keil (#30 Rim Cyl) SUT-3
Plug Follower Set Kwikset SUT-1 CPH-10
Lockwood SUT-1 CPH-10
These 4 Plug Followers will fit virtually all of the rim or mortise
Lockwood (956 Rim Cyl) SUT-3
cylinders currently in use. They are made of centerless ground
National of Rockford SUT-1 CPH-10
bar stock. Includes one each of SUT-0, SUT-1, SUT-3 & SUT-10. (Excludes KNK)
ORDER # ITEM # PRICE National of Ozone Park SUT-1 CPH-10
360-0415 HPC SUT-47 $77.24 Nesco SUT-1 CPH-10
Russwin (0.5" Diameter) SUT-1 CPH-10
LOCKSMITH TOOLS
AVAILABLE SEPARATELY Russwin (Oversize) SUT-10 CPH-20

Sargent SUT-1 CPH-10
SUT-1 (.495" / 12.6mm Diameter) Schlage SUT-1 CPH-10
SUT-3 (.500" / 12.7mm Diameter) Segal SUT-1
SUT-10 (.550" / 14mm Diameter) Taco SUT-1
ORDER # ITEM # PRICE Taylor SUT-1
360-0407 HPC SUT-1 $23.94 Weiser (Excludes Beverly) SUT-1 CPH-10
360-0408 HPC SUT-3 $24.18 Weiser (Beverly) SUT-23 CPH-10

Welch SUT-1
360-0409 HPC SUT-10 $25.58
Weslock (Excludes KNK) SUT-1
Yale SUT-1 CPH-10
Yale (Small Pins) SUT-0 CPH-15
CPH-10 Solid Plug Holder
Made of hardened bar stock and holds many
popular plugs: Arrow, Corbin, Kwikset, Lockwood, SUT-600 Adjustable Plug Holder
Sargent, Schlage, Weiser & Yale. Holds .510" plugs.
The Adjustable Plug Holder is a
ORDER # ITEM # PRICE universal plug vise. The hole size is
360-0075 HPC CPH-10 $39.26 adjustable from .350" (8.89mm) to
.600" (15.24mm) to give a perfect
fit on many different cores. The plug
vise body and slide are hardened and
have a black oxide finish.
360-0417 HPC SUT-600 $139.98

Call, Toll Free
CPH-9 Bench Plug Holder Cylinder Drill Jigs

The CPH-9 is a real space and time saver. This versatile Some cylinders are impossible to pick. Even the best
holder is hardened and has a black-oxide locksmith may be foiled by a broken cylinder spring,
finish. It conveniently mounts on your corroded pins, etc. In these cases drilling is the an-
work bench with chambers sized to swer. HPC jigs assure perfect alignment on the shear
hold these popular plug sizes: 0
.395", line for drilling with the included bit.
0.495", 0.55", and 2 chambers
for 0.5" to accommodate the
variances found in some locks. CDJ-1
Cylinder Drill Jig and
Drill Bit for Flat Face Cylinder
360-0074 HPC CPH-9 $102.48
360-0047 HPC CDJ-1 $43.04

CPH-5 Vise Plug Holder
The CPH-5 is a real space and time CDJ-2
saver. This portable plug holder is Cylinder Drill Jig and Drill Bit
held in a vise. The body is
for Recessed Tulip Design Types
hardened and has a black oxide
finish. It holds the 5 most popular sizes: ORDER # ITEM # PRICE
• .404" (10.26mm) 360-0048 HPC CDJ-2 $43.04
• .504" (12.80mm) • .508" (12.90mm)
• .512" (13.00mm) • .556" (14.12mm)
CDJ-3
Cylinder Drill Jig, Drill Bit,
360-0072 HPC CPH-5 $102.48 2 Key Blades and an Allen
LOCKSMITH TOOLS
Wrench for Removable Core
Cylinders
MK-CD MasterKing Software By drilling the control lug, the core can be
• Multi-User/Level Password Security removed and the door opened. With the
• Modifiable Report Format Allows core removed, the pins can be decoded
You to Print Only What You Want and a new control key can be code-cut. By drilling the
• Contains a Database of More Than shearline, access can be gained immediately. 2 key blades
220 Lock Types From More Than 50 for Best are included. If you are drilling an SFIC cylinder
Manufacturers other than Best, then you will need to prepare the appro-
• Generate 1 to 5-Level Systems priate key blades.
• Displays Change Keys and Masters
for each Block, Row, Vertical Group, Horizontal Group,
Page and Multiple Pages in the PAGE Format 360-1430 HPC CDJ-3 $68.28
• Specify the number of people and doors, select the
QUICK Format, and the program instantly creates the
system Illuminated Pin Stations
• Automatic Manufacturer Specification Fill-In with Easy This station secures to your table top and comes with
Editing Capacity a multi-size plug holder and illuminated followers that
• Download Systems to CodeMax®, Tiger SHARK™ and brighten up the inside of cylinder
Blue SHARK™ Machines for Error Free Key Cutting housings with natural light. Illumi-
• Very Intuitive and Easy to Navigate nated followers are also available
separately.
360-2204 HPC MK-CD $801.44
360-0174 IPIN-99 $346.70
LOCKSMITH TOOLS
Fax Your Order
Tubular Lock Saws FSR-T100 F-Series Manipulation Tool

If picking is not possible, The design of the F series cylinder can make it
lock-outs of tubular key difficult to pick. The F Series Manipulation Tool
locks can still be ser- allows you to defeat these locksets with ease. Manip-
viced. These hole saws ulate F Series leversets through the existing opening
destroy the pins at the in the back of the handle. Open F Series knoblocks
shear line. Hole saws are the same way after making a small hole in the lock
available for standard and oversize keyways. Saws will fit neck. The HPC F Series Manipulation Tool is de-
any 1/4" (6.35mm) electric drill. Saw life is approximately signed so that You Only Need This One Tool to open
3 openings. Not for use on locks with hardened pins or either levers or knobs regardless of the handing of
ball bearings in the keyway. the door. It even works great around tight jambs
where other tools don't fit.
AG-1 Standard Size Tool
and Extra Saw for .375" (9.53mm) Diameter ORDER # ITEM # PRICE
ORDER # ITEM # PRICE 360-0610 FSR-T100 $58.38

360-0009 HPC AG-1 $90.22
360-0155 HPC G-1 Replacement Saw $29.12
FSR-P100 F-Series Knob Punch Tool
AG-2 Oversized Tool The F Series Pliers are designed to punch a
Oversize Tool and Extra Saw for .394" (10mm) Diameter small hole in the neck of F Series knobs so that
ORDER # ITEM # PRICE the manipulation tool can be used to open the
360-0010 HPC AG-2 $90.22 lock. These pliers are specifically designed to
work around tight jambs like no other tool.
This specially designed tool cuts a small cres-
cent hole and pushes the metal away. After
LOCKSMITH TOOLS
CE-6000 Cylinder Eater™ opening the lock the metal can be bend back
This drill attachment will to cover the opening with a flat blade screw-
chew up every cylinder driver.
you put in front of it! The ORDER # ITEM # PRICE
replaceable tips allows you 360-0615 FSR-P100 $194.58
to instantly devour mailbox
locks, knoblocks, deadbolts,
IC and more, gnawing
through shear lines with
fool-proof accuracy.
The optional carbide bit gobbles up high-security cylinders YOUR ELECTRONIC
as well. Throw away all of your cylinder jigs and open ACCESS CONTROL
everything with just one tool! The HPC Cylinder Eater™ is
a must-have for every security specialist who must bypass SPECIALISTS
locked cylinders! Comes with drill attachment and 3 tips
(.395, .500 and .550). Additional tips and bits coming soon
for Medeco®, Kaba, Primus®, GM and more!
ORDER # ITEM # PRICE Give us a call at 727-541-5536

360-0300 HPC CE-6000 $580.46 We'd love to help you out!

Call, Toll Free
KIKR-100 Key-in-Knob Removers SKM-2D Ultimate Micrometer

Occasionally locksmiths need to service Allows for precise measuring of
a locked door that they cannot pick depths of cuts. The easy to see
open. Based on the HPC Lever Handle digital display gives accurate
Remover, the Key-in-Knob Remover readings in thousandths of an inch, without eye strain.
removes ball, tulip and standard style The SKM-2D is satin chrome plated with heavy duty con-
knobs for servicing without damaging struction for years of service. It includes a genuine leather
the lockset! It is designed for use on Grade case with snap closure.
1 and Grade 2 knobsets that have a ORDER # ITEM # PRICE
retaining pin that extends into a hole in the knob shank. 360-0348 SKM-2D $858.38
Perfect when picking is not an option! A must-have tool
for all security professionals.
ORDER # ITEM # PRICE SSM-36 Sturdy Strike Markers
360-0102 KIKR-100 $480.86 The Sturdy Strike Marker easily marks
strike location on wood and steel jambs.
It features durable solid steel construc-
LHR-100 Lever Handle tion with replaceable hardened steel tips.
Removers ORDER # ITEM # PRICE
Quickly remove locked lever handles 360-0625 SSM-36 $145.88
when picking is not an option.
Designed to quickly remove locked lever
handles for servicing. It is ideal when EBM-234 Easy Backset Marker
picking the lock is not an option. You
Marks backset location for
simply place the tool’s specially designed hub over the lever,
2-3/4” and 2-3/8” backset.
and using a simple procedure of manipulating a few bolts
LOCKSMITH TOOLS
It includes edge boremarks
and screws you are able to remove the handle, open the
and is quick and easy to use!
door, and service the lock. It is designed for use on Grade 1
Installing locksets and dead-
and Grade 2 leversets that have a retaining pin that extends
bolts is an everyday occur-
into a hole in the lever shank. Bolt location 2-¾" 2-⅜"
rence. This new tool makes Backset
for 1-¾"
ORDER # ITEM # PRICE it easy to accurately mark the locations
360-0100 LHR-100 $480.86 backset on the door when a jig is not available.
HPC Small Pin Depressing Screw
360-0620 EBM-234 $15.56
360-0101 LHR-SSCREW $35.78

MGS-1 Magna Scope
Economically priced otoscope, ideal for
SKM-1 Straight Yoke Micrometer magnifying and illuminating hard to see
The Straight Yoke Micrometer has a ratch- areas. This compact functional instru-
et thimble to assure proper tightening for ment reflects the same level of crafts-
an accurate reading in thousandths of an manship and precision as many of the
inch. It has a satin chrome body and yoke, most expensive medical instruments on
and also includes a genuine leather case today's market. Packaged complete with
with snap closure. 4 specula, 2 long and 2 short, including the pin depressor
ORDER # ITEM # PRICE assembly. Requires 2 AA batteries.
360-0346 SKM-1 $409.78 ORDER # ITEM # PRICE
360-0244 MGS-1 $351.30
LOCKSMITH TOOLS
Fax Your Order
HKD-75 Pocket Decoder Kit GMTD-5 Tumbler Decoder Gauges

Pocket sized decoder kit determines Eliminates guess work reading GM
original factory depths of most tumblers. Press inward on side bar &
popular domestic pin & disc rake tumblers until side bar moves in
tumbler cylinder & automotive to unlocked position. Place gauge pin
keys. Insert correct information over each wafer until shoulder stop
card into top slot of decoder. butts against top of plug.
Lowering depth pin into each cut,
from bow to tip, will indicate correct depths in window. ORDER # ITEM # PRICE
ORDER # ITEM # PRICE 360-0161 GMTD-5 $23.90

360-0164 HKD-75 $477.60
MPS-300 Multi-Purpose
FAL-15X Flex-A-Light™ Spotlight
The Flex-A-Light™ is equipped with The Multi-Purpose Spotlight is a heavy-duty
an extremely durable LED to super bright gooseneck light that is ideal for
stand up to heavy use. The all types of vehicle work and can be used in
LED is cool-touch, so you no a van as a portable shop light. Equipped with
longer have to worry about long lasting LEDs, you can count on it to
a hot bulb breaking when it comes in contact with a cold lighten your load!
window. The LED is also long lasting, about 100 times the ORDER # ITEM # PRICE
life expectancy of an incandescent bulb. 360-0360 MPS-300 $139.98
The Flex-A-Light™ is more flexible than other bending
lights, yet rigid enough to keep straight. The Flex-A-Lights
do not use a switch; just plug in the light extension and HPC Stamp Aligner™
LOCKSMITH TOOLS
the light is on. You no longer need to worry about switch-

es that fail or dead batteries from your light switching on The Stamp Aligner™ holds the
accidentally or from forgetting to switch your light off. stamps so that figures may be
stamped on keys in an exact
It includes a suction cup to conveniently secure the light straight line with exact spacing
to the window. Or, use the 36" (91mm) extension and between characters.
keep the power handle in your pocket. Requires 3 AA
batteries. A key is placed onto the bottom
part of the Stamp Aligner and secured in place. The top
part is moved into one of the spacing indexes. The stamp
360-3010 FAL-15X $147.80 is placed into the square hole over the spot where the key
is to be stamped. The stamp is held exactly in place for it
to be struck by a hammer. Spacing is clearly defined by a
TLP-CMOD-B 7-Pin Tubular Pick spring loaded detent built into the device. Each character
Aluminum handle, stainless steel stamped on the key will be straight, spaced evenly, and
body and spring steel feelers. aligned perfectly. When the stamps are all struck with the
Opens most locks in seconds. same force, the result is a key that looks like it was factory
Employs an adjustable collet stamped. (Hammer not included.)
and 0-ring. This design permits
SA-7 1/4" square hole fits 3/32" and 1/8" number and letter
infinitely variable tension against the feelers. Most widely
die stamps (stamps not included)
used tubular lock pick in the industry. In a genuine leather
case with the TKPD-1 decoder. ORDER # ITEM # PRICE
ORDER # ITEM # PRICE 360-2341 SA-7 $424.50

360-0436 TLP-CMOD-B $211.80

Call, Toll Free
AKK-P17 Pocket Killer Kit DSP-1 Double Sided Disc Tumbler

Lock Picks
DSP-A
DSP-B
DSP-C
DSP-D
The Pocket Killer Kit, complete with a 16-piece assortment Designed specifically for use on double-sided cam locks. The set
of 10 picks, 4 tension tools, and 2 extractors, a top grain contains 4 picks which provide 8 different configurations. These
leather case, and the CO-58 Pocket Jim™ car opener. picks will quickly defeat the most popular double-bitted wafer
tumbler locks, commonly found on glass showcases, office furni-
The car opener can be assembled to be a Slim Jim™, Peg ture and some cash boxes.
Leg™ or through the handle style opener. • Shirt Pocket Size: 3-1/2" x 5-3/8" (9 x 14cm)
• Shirt Pocket Size (Closed): 2-5/8" x 6-3/8" (7 x 16.5cm) • Blue Plastic Case included
• Genuine Leather Case with Full Zipper • Contains 4 Double-Sided Picks
• Hardened Spring Steel Components
• Contains 10 Picks, 4 Tension Tools, 2 Extractors and a
Collapsible Car Opener ORDER # ITEM # PRICE
• Hardened Spring Steel and Stainless Steel Components 360-0126 DSP-1 $43.16
360-1450 AKK-P17 $194.64

ES-2000 Extractors Tool Set
LOCKSMITH TOOLS
SSX-10
THREE WAREHOUSE LOCATIONS SSX-11
Southern Lock of Largo SSX-20

Corporate Headquarters
10910 Endeavour Way, Largo, FL 33777 SSX-21
(727) 541-5536 • Fax: (727) 544-8278
Toll Free: (800) 282-2837 The ultimate in broken key and pick removal. Tools are designed
to slide next to broken keys along the side mill and ride along
the bottom pins to hook into a cut in the key. Tools can be bent
Southern Lock of South Florida to side angles to reach around many obstacles. High grade stain-
1445 SW 6th Court, Pompano Beach, FL 33069 less steel body. Stainless steel 4-piece set in leather case.
(954) 943-1177 • Fax: (954) 943-4211 ORDER # ITEM # PRICE
Toll Free: (888) 780-6071 360-0995 ES-2000 $63.54
Southern Lock of Charlotte

Extractors AVAILABLE SEPARATELY
8200-C Arrowridge Blvd, Charlotte, NC 28273
(704) 527-6777• Fax: (704) 527-0058 ORDER # ITEM # PRICE
Toll Free: (888) 571-9145 360-1000 SSX-10 $11.44

360-1001 SSX-11 $11.44
360-1002 SSX-20 $11.44
360-1003 SSX-21 $11.44
LOCKSMITH TOOLS
Fax Your Order
EZ-6 Interchangeable Extractor Set NDPK Deluxe Pick Sets

The Interchangeable Extractor Set
is the most popular extractor set on the market. Its
compact size allows you to carry a variety of
extractors inside this tiny set. It includes 4
extractor blades stored inside a hollow
handle: 1 saw type extractor blade;
2 round extractors (.040") and 1 round extractor (.050").
• Shirt Pocket Size (Closed): 1/4" x 3-1/2" (0.65 x 9cm)
• Contains 4 Interchangeable Extractor Blades
• Stainless Steel Components
The Deluxe Pick Set is perfect for the beginning locksmith. It
ORDER # ITEM # PRICE comes complete with 10 picks, 4 tension tools, and 2 extractors.
360-0142 EZ-6 Key Extractor Set $45.46 Each pick is made of a hardened spring steel, tempered to the
perfect degree of hardness.
It contains a mix of rake, diamond, hook, ball, and double ball
Extractor Replacement Blades (10/pack) tip picks; light, medium, and heavy weight tension wrenches;
ORDER # ITEM # PRICE/PK and saw type key extractors.
360-0143 EZ-7A Saw Type $27.72 • Shirt Pocket Size (Closed): 2-5/8" x 6-3/8"
360-0144 EZ-7B Round, 0.4"/1mm dia $36.20 • Genuine Leather Case with Full Zipper
360-0145 EZ-7C Round, 0.5"/1.27mm dia $36.20 • Contains 10 Picks, 4 Tension Tools and 2 Extractors
360-0146 EZ-7D Assortment: 7A (x4), 7B (x4), $28.90
7C (x2) ORDER # ITEM # PRICE
360-0254 HPC NDPK $88.16

LOCKSMITH TOOLS
JKP-5 Jacknife Pick Set NDPK-24 Pro-Mixer Pick Sets

The Jackknife Pick Set is a complete compact pick
set, that is shaped like a pocket knife. It has 2
rakes, 1 diamond, 1 hook and 1 tension tool. The
Jackknife folds up and fits in
your pocket. An optional leather case
(JPO-1) is available.
• Shirt Pocket Size (Closed):
4" x 3/4"
• Contains 4 Picks and
1 Tension Tool
• Spring Steel Components
• Optional Genuine Leather Case with Snap The Pro-Mixer Pick Set contains the best of HPC's regular line
and HPC's Stainless Steel Series picks and extractors. It con-
ORDER # ITEM # PRICE tains a mix of full, half, and three quarter rakes and diamond
360-0185 JKP-5 $40.68 tips; half, single, and double ball picks; light, medium, and
heavy weight tension wrenches; and hook and saw type key
extractors. The set also includes a variable tension tool.
• Shirt Pocket Size (Closed): 2-5/8" x 6-3/8"
• Genuine Leather Case with Full Zipper
• Contains 14 Picks, 5 Tension Tools and 5 Extractors
• Hardened Spring Steel and Stainless Steel Components
360-1445 NDPK-24 $142.54

Call, Toll Free
NDPK-32 Superior Pick Set NDPK-100 Paramount Pick Set

For locksmiths who need an
extensive assortment of lock
picking tools, so that replace-
ment will be unnecessary for
some time. It contains a wide
choice of full, half, and three
quarter rakes and diamond
tips; half, single, and double
ball picks; light, medium, and
heavy weight tension wrench-
Perfect for the discerning locksmith. It provides a wide selection es; and hook and saw type key
of picks for a variety of uses. This set contains a variety of full, extractors. Includes letterbox
half, and three quarter rakes and diamond tips; half, single, pick/tension tools, as well as
and double ball picks; light, medium, and heavy weight tension variable tension tools. Plus, the set includes dual pronged ten-
wrenches; and saw type key extractors. It also includes dual sion tools that provide even tension on double-sided wafer locks.
pronged tension tools that provide even tension on double-sided
wafer locks. • Tool Box Size (Closed): 5-3/4" x 10-3/4" (14.5 x 27.5cm)
• Shirt Pocket Size (Closed): 2-5/8" x 6-3/8" • Contains 72 Picks, 19 Tension Tools and 9 Extractors
• Genuine Leather Case with Full Zipper • Hardened Spring Steel Components
• Contains 22 Picks, 7 Tension Tools and 3 Extractors
• Hardened Spring Steel Component ORDER # ITEM # PRICE
ORDER # ITEM # PRICE 360-0257 NDPK-100 $399.00

360-0255 NDPK-32 $129.94
OH-8 On-Hand Belt Pick Sets

Comes complete with 8 picks, 2 tension tools,
NDPK-60 Professional Pick Sets
LOCKSMITH TOOLS
and HPC's EZ-6 Interchangeable Extractor Set.
The case is made of genuine leather with
two adjustable leather straps.
• Shirt Pocket Size: 2-5/8" x 6"
• Contains 8 Picks, 2 Tension Tools and 1
Extractor Set
360-1205 OC-8 $144.26

The Professional Pick Set contains a generous assortment of
the most popular picks, tension wrenches, key extractors, and
feelers. It contains a vast selection of full, half, and three quarter
rakes and diamond tips; half, single, and double ball picks; light,
OC-16 On-Call Belt Pick Sets
medium, and heavy weight tension wrenches; and hook and On-Call Belt Pick Set comes complete with
saw type key extractors. It also includes letterbox pick/tension 16 picks, 2 tension tools and 2 extractors.
tools, as well as variable tension tools. Plus, the set includes dual The case is made of genuine leather with
pronged tension tools that provide even tension on double-sided an official Locksmith ID badge on the
wafer locks. front. The case is secured on your belt by
an adjustable leather strap.
• Jacket Pocket Size (Closed): 4" x 6-1/2" • Shirt Pocket Size (Closed): 3-1/4" x 6"
• Genuine Leather Case with Full Zipper • Genuine Leather Case with Full Zipper
• Contains 40 Picks, 14 Tension Tools and 6 Extractors • Contains 16 Picks, 2 Tension Tools and 2 Extractors
• Hardened Spring Steel Component • Hardened Spring Steel & Stainless Steel Components
360-0256 NDPK-60 $249.02 360-1204 OC-16 $144.26
LOCKSMITH TOOLS
Fax Your Order
PIP-13 Novice Pick Set PIP-2000 Stainless Steel Pick Sets

The Novice Pick Set contains 7 picks, 3 tension
tools, and 1 broken key extractor. The tools
are made of hardened spring steel and
come with a top grain leather case
with snap.
• Shirt Pocket Size: 1-3/4" x 5-5/8"
• Top Grain Leather Case
with Snap
• Contains 7 Picks, 3 Tension Tools
and 1 Extractor The Stainless Steel Series Pick Set consists of 13 stainless steel
• Hardened Spring Steel Components tools (9 picks and 4 extractors) and 3 tension tools which have
been designed to outperform all other tools on the market. The
design of the tools permits easier access into the most restrictive
360-0293 PIP-13 $45.68 keyways. The picks and extractors are made of high grade stain-
less steel, offering optimum feel within the lock.
• Shirt Pocket Size (Closed): 2-5/8" x 6-3/8"
PIP-23 I.D. Badge Pick Set • Genuine Leather Case with Full Zipper
The I.D. Badge Pick Set is a handy way • Contains 9 Picks, 3 Tension Tools, and 4 Extractors
• Hardened Stainless Spring Steel Picks and Extractors
to carry a lock picking set and a
• Tempered Spring Steel Tension Tools
means of identification at the
same time. On the back of ORDER # ITEM # PRICE
the case there is a window 360-2000 PIP-2000 $188.90
that protects an
identification card with
LOCKSMITH TOOLS
space for a photo or

thumbprint of the owner.
PSA-20 Padlock Shim Pick
The set contains 4 foam grip handled picks and extractors, This 20 piece Padlock Shim Pick Set is a
fantastic alternative to picking, and in
4 steel handled picks, 2 tension tools, and a set of 4 dou-
many situations is the only way to open
ble-sided picks for disc tumbler locks. a padlock in seconds. The shim picks'
• Shirt Pocket Size: 3" x 5-1/2" unique design makes them amazingly
• Genuine Leather Case with Snap successful. Their specialty is opening laminated
• Contains 12 Picks, 2 Tension Tools and 4 Extractors type padlocks (the most popular variety in use
• Hardened Spring Steel Components today), though they will open almost any lock
which has a spring lever latch locking bar (as opposed to a ball
locking latch), providing there is enough clearance to allow the
360-0294 PIP-23 $127.66 shim to operate. The assortment contains 5 of each of the 4 most
common shackle diameters, which enables it to open a broad
spectrum of locks.
PKS Warded Padlock Pick Set • Contains 5 Each of 4 Most Common Shackle Diameters
This compact pick set efficiently opens warded • Stainless Steel Components
padlocks. This set of 5 picks is held together ORDER # ITEM # PRICE
by a key ring and can be attatched to your
belt loop. Helps avoid costly destruction 360-1004 PSA-20 $72.94
of padlocks.
• Compact Enough to Fit in your Pocket
• Contains 5 Picks with Key Ring
360-0295 HPC PKS $23.92

Call, Toll Free
Renegade Stainless Steel Pick Set

• Contains 9 Picks, 3 Tension Tools, and
4 Extractors
• Hardened Stainless Steel Picks and Extractors
• Tempered Spring Steel Tension Tools
• Thin, flexible, and strong - Permits easier
access into the most restrictive keyways
• Packed in a rugged Brown Leather Case
360-2003 HPC COLOR-R-16 PICK SET $178.70
Stealth Pick Set

• ontains 10 Rakes, 5 Hooks, 5 Diamonds, 5 Balls,
C
5 Extractors, and 5 Tension Tools
• Picks: Hardened spring steel blades with jet-black
aluminum handles
• Extractors: Stainless steel blades with stainless
steel handles
• Tension Tools: Spring steel
• Jet-black Aluminum Handled Picks packed in an
Ultra-black Case
LOCKSMITH TOOLS
360-2004 HPC COLOR-S35 PICK SET $152.28
Lady Locksmith Pick Set

• Contains 10 Rakes, 5 Hooks, 5 Diamonds, 5 Balls,
5 Extractors, and 5 Tension Tools
• Picks: Hardened spring steel blades with bright
pink aluminum handles
• Extractors: Stainless steel blades with stainless
steel handles
• Tension Tools: Spring steel
• Pink Aluminum Handled Picks in a soft Suede
Grey Case
360-2007 HPC COLOR-L35 PICK SET $149.42
LOCKSMITH TOOLS
Fax Your Order
HPC Color Coded Picks Make Your Own Pick Sets (Case not included)
The series includes a different color for each type of pick:
red for rakes, blue for hooks, green for balls, and gold for 15 Piece Color Coded Pick Pack
diamonds. 2 Tension Tools 2 Green Balls
4 Red Rakes 2 Gold Diamonds Handle
3 Blue Hooks 2 Silver Extractors
2)
Red Rakes
.02

R(
360-1500 CCPK-15 54.16

28
-11
(.0
PX
R
CL
11
) 25 Piece Color Coded Pick Pack

X-
22
LP
(.0
4 Tension Tools 3 Green Balls
CH
6R
-1
PX 8 Red Rakes 3 Gold Diamonds Handle
CL
22) 4 Blue Hooks 3 Silver Extractors
(.0
5R
PX-1
CL Blue Hooks ORDER # ITEM # PRICE
) 360-1501 CCPK-25 $86.90

(.022
-31H
CLPX
35 Piece Color Coded Pick Pack

CLPX-12H (.022)
CHLPX 5 Blue Hooks 5 Silver Extractors
-12H (
.028)
CBP
X-4 Green Balls 360-1502 CCPK-35 $112.08
1 B(
.02
2)
CB
PX
LOCKSMITH TOOLS
-5
B
(.0
22
HPC Color Coded Pick Sets
)
CL
PX
COLOR-35 Color Coded Pick Set

CH
-1
0D

LP
(.0
X-1

22
0
Gold Diamonds
)
D
5 Blue Hooks 5 Silver Extractors

(.0
28
)
Includes HPC’s soft leather NKPK case.

Individual Color Coded Picks ORDER # ITEM # PRICE
Pictured top to bottom 360-0035 COLOR-35 $149.42
ORDER # ITEM # PICK TYPE PRICE
360-1510 CLPX-11R Red Rake $4.80

360-1511 CHLPX-11R Red Rake $4.80 Foam Pick Grip Handle
360-1512 CLPX-16R Red Rake $4.80 This soft foam pick grip is for picks
360-1513 CLPX-15R Red Rake $4.80 with or without metal handles.
360-1514 CPX-31H Blue Hook $4.80 Its unique design grips tools without any adhesive. 3/16"
360-1515 CLPX-12H Blue Hook $4.80 round, the inside diameter expands to also hold: files, wire
cutters, tweezers, car openers, etc. Provides maximum pulling
360-1516 CHLPX-12H Blue Hook $4.80
strength for key extractors.
360-1517 CBPX-41B Green Ball $4.80
ORDER # ITEM # PRICE/PK 10
360-1518 CBPX-5B Green Ball $4.80
360-1519 CLPX-10D Gold Diamond $4.80 360-2447 PICK GRIP $16.00
360-1520 CHLPX-10D Gold Diamond $4.80

Call, Toll Free
LIGHT TENSION MEDIUM TENSION RIGID TENSION

TR-9 TR-4
TR-25
TR-12
TR-14
TR-7 TR-5
TR-23
TR-11 VV-6
ORDER # ITEM # LENGTH PRICE ORDER # ITEM # LENGTH PRICE ORDER # ITEM # LENGTH PRICE
360-0460 TR-9 5-1/4" $4.20 360-0464 TR-14 4-1/2" $4.20 360-0455 TR-4 2-1/4" $4.20
360-0458 TR-7 3-1/4" $4.20 360-0466 TR-23 3-1/4" $4.20 360-0456 TR-5 3-3/4" $4.20
360-0461 TR-11 3-1/4" $4.20 360-0468 TR-25 5-1/4" $4.20 360-0510 VV-6 2" $6.90
360-0462 TR-12 4-1/2" $4.20
Double-Sided Tension Wrenches

Medium tension, Zinc-plated
360-0425 TEN-7 $4.76
LOCKSMITH TOOLS
Variable-Size Tension Wrenches Diamonds
The tips of this tension wrench can be compressed to fit ORDER # ITEM # HANDLE PRICE
into keyways of various sizes. Designed for standard locks, 360-0231 LPX-10 (.022) Stainless $3.90 LPX-10
including automotive door locks. 360-0165 HLPX-10 (.025) Stainless $4.00 HLPX-10
360-0079 CPX-10 (.022) Foam $4.46 CPX-10
360-0405 STW-3 $5.26

Rakes
ORDER # ITEM # HANDLE PRICE
Tension Tools for Tulip Knobs 360-0232 LPX-11 (.022) Stainless $3.90
LPX-11
Medium tension HLPX-11
TR-2 360-0166 HLPX-11 (.025) Stainless $4.00 CPX-11
ORDER # ITEM # LENGTH PRICE
360-0080 CPX-11 (.022) Foam $4.46
360-0453 TR-2 4-1/2" $4.80 LPX-15
360-0234 LPX-15 (.022) Stainless $4.00
360-0465 TR-22 4-3/4" $3.98 TR-22
360-0235 LPX-16 (.022) Stainless $4.00 LPX-16
Extractors EZ-1 Hooks

ORDER # ITEM # PRICE EZ-2 ORDER # ITEM # HANDLE PRICE
360-0233 LPX-12 (.022) Stainless $3.90 LPX-12

360-0138 EZ-1 Saw Blade $5.96
EZ-3 360-0167 HLPX-12 (.025) Stainless $4.00 HLPX-12
360-0139 EZ-2 Hook $2.64 CPX-12
360-0081 CPX-12 (.022) Foam $4.46
360-0140 EZ-3 Hook/Foam $6.06
EZ-5
360-0141 EZ-5 Spiral Blade $8.48
LOCKSMITH TOOLS
Fax Your Order
HFTT-KIT Hands-Free HPG-10 Pistolpick™ Pick Gun

Designed to easily rake open pin and
Tension Tool Kit disc tumbler locks. Rapid squeezing of
Picking is no longer a the trigger bounces the pick needle,
raising the pins or discs to the shear
two handed job! line. All you add is proper tension, and
HPC’s Hands-Free Tension Tool Kit the lock is open.
takes the difficulty out of picking. All parts, including the main housing,
No need to fumble with the ten- are made from nickel-plated cold rolled
sion. Simply slip the tool into your steel for protection against rust and to provide an attractive,
cylinder keyway (vertical or horizontal), slide and set the weight high quality pistol finish. The Pistolpick™ comes with 3 pick
to adjust the amount of tension, and then let go! All that’s left is blades and 2 tension wrenches. An optional leather holster case
raking the pins. Kit is complete with a Hands-Free Tension Tool is available.
and a matching 2-sided rake/diamond. The Tension and Picking
tools clip together with a specially designed holder. ORDER # ITEM # PRICE
360-1440 HPG-10 $85.86

360-0003 HFTT-KIT $112.50 Replacement Pick Needles

360-0269 P-3 Curved $3.50
360-0268 P-2 Straight $3.50
FIT-2 Flip-It™ Tension Tool
When picking a lock in the wrong
direction (intentionally or by error) EPG-1 Electropick™ Electric Pick Gun
the Flip-It™ will flip the cylinder plug
past the upper pins and save you the job The original cordless
electric pick gun. Now with
of re-picking. It also works equally well on
ergonomic grip and more
disc tumbler locks. comfortable to use. The gun rakes open
The Flip-It™ comes with many exclusive features. The 2-Pin pin and disc tumbler cylinders using a rapid
LOCKSMITH TOOLS
Quick Lock/Release feature allows for easy release of the rotat- up and down striking movement, which causes the top
ing action. The sure stop feature prevents over-winding in either and bottom pins to separate, meeting the shear line. The up and
direction. The ergonomic design of the knurled knobs makes it down motion is adjustable by a thumbscrew with a locking nut
controlling the action after the range of motion is set. The Elec-
easy to pre-load the tool's spring action. Once the Spring action
tropick™ comes complete with 4 AA batteries, 4 pick blades and
is set, the Flip-It™ will flip the cylinder plug with the push of a
2 tension tools. Replacement Pick Blades are available.
thumb.
360-1465 FIT-2 $129.60 360-1439 EPG-1 $338.78
TNT-20 Tension Tools

Tension wrench is improved version
of TNT-15. TNT-20 incorporates Don’t See What You’re Looking For?
spring activated tension that is
utilized in the TNT-l thru 4. Also has
spring-loaded adjustable tension prongs, which can be We can special order and source products for you
adjusted to the size of the keyway. Works well on small
keyways that are flush with the shell (such as those found
on padlocks & file cabinet locks), as well as standard rim
QUICKLY!
& mortise cylinders. Also works with some foreign and
domestic cylinders.
360-2445 TNT-20 $112.78

Call, Toll Free
Micro-Dial Calipers
Rekeying Tool For Titan Locks
Gives instant foot depth measurements,
reading from back of key blank to depth of cut. Checks center of In order to re-key the Titan lock, you must cut one
cut from bow key stop and distance from center to center of cuts of these re-keying tools to the proper change key
on the key blank with the cut key in the plug. Checks length of in order to remove the cylinder.
the pin required.
ORDER # ITEM # PRICE/EA
ORDER # ITEM # PRICE 400-2181 1176RK $1.36
400-2180 884-00-21 $76.70
EK3 Disassembly Tool

No longer be concerned about damaging the components of
Got electronic two-part keys while trying to disassemble them.
Questions
• Quickly disassembles two-piece
electronic keys that have "snap
tabs"
WE CAN HELP! • No damage to key components
• Made in the US
• Makes battery replacement easy
• Dimensions: 2.25" L x 2.75" W x
3.25" High
1-800-282-2837 ORDER #
400-2080
ITEM #
EK3
PRICE
$88.20
LOCKSMITH TOOLS
Kreate-A-KeyTM Optional Modules:
Increase the basic Kreate-A-Key software capabilities with
Premium Code Software these add-ons.
This software can be utilized stand- • Auto Module-Car opening information, cylinder tumbler
alone or interfaced with the Ultrac- locations, programming procedures for transponder
ode and Triax-e.code to cut keys by keys and key fobs and more.
code automatically. • Triax-e.code Module-Allows the Kreate-A-Key to take
control of the Triax-e.code to automatically cut side-
• Search by code, manufacturer, winder style keys.
card number, key blank reference, • MK Module-Create masterkey systems easily.
key type, vehicle make, model, • Automatic key cutting capabilities, pinning and
year and more bitting charts.
• Key blanks illustrations and profiles
• Automotive, commercial, residential & padlock database Specifications:
Components: Auto Install CD Windows Application
• Compare and Create custom key dimensions and down-
load to the Ultracode Minimum Requirements:
• Key blank reference lists key blank numbering systems Windows 2000/XP/2003, CD ROM drive, Windows sup-
for the popular manufacturers ported Printer, Pentium CPU, 128MB RAM, 100MB Avail-
• Supports popular code machines able hard disk space.
• Store and retrieve codes
• Optional modules increase basic Kreate-A-Key software
capabilities
LOCKSMITH TOOLS
Fax Your Order
K-22 Lever Opening Tools K-4 GM Decoders

Decodes all tumblers in one step
Opens lever style door knobs. If you can slide
without disassembly of the lock. Pick
this tool under the door, you will open it.
sidebar down. Press the K-4 firmly
ORDER # ITEM # PRICE into the 6 chambers of the lock. Read
435-0022 K-22 $69.50 cuts with gauge provided.
• Instructions & case included • Guaranteed for life
Replacement Cable • Stainless steel fingers • Aluminum card
for K-22 Lever Opening Tool
435-0004 K-4 $38.35
435-0023 K-22 CABLE $11.92
Spin Out Mortise Cylinder

K-18 Change Key Sets Screwdriver
Set of 12 most common change keys Designed to remove the most stubborn screws
in handy case. Keys fold out "knife on mortise cylinders. Features a screwdriver
style". Case engraved with description with an oversized handle for extra torque.
of uses. Keys made of stainless steel. Four sizes of interchangeable screwdriver
Diebold 177-4 Wheel Mosler 35-4 Wheel bits - two slotted and two Phillips. Includes
stand with bronze bearing, to prevent screwdriver from slipping
S&G Padlock-3 Wheel Mosler 302-3 Wheel
and causing injury. Allows constant, even pressure to screws.
LaGard-3 Wheel S&G AMSEC 3 Wheel
Prevents stripped out screw heads.
LaGard-4 Wheel S&G 6720-3 Wheel
LaGard AMSEC-3 Wheel Diebold 180-3 Wheel
435-0010 SPIN OUT $186.46
435-0018 K-18 $209.14

Door Laser Guide
LOCKSMITH TOOLS
for Core Drilling Doors

K-TMPA/R Installation Use of laser sight assures
Template for Adams Rite accurate drilling through core, to
Allows you to make precise installation of Adams prevent damage to either face of door.
Rite 1850, 4530, 4710 & 4711 Series Includes 1/4" bit for drilling pilot hole.
It also works with the International DH1822 &
DL4511. For 7/8", 31/32" and 1-1/8" backsets. In- 435-0125 DRLSR $398.38
cludes guide for Adams Rite exit indicator 4089 Has
cutout for BBW #5024 & International HB4085 flush
bolts. Designed to be used with a 1/2" router guide Emergency Transfer Dial
with a 1/4" bit. Allows dialing of a safe away from the drill
ORDER # ITEM # PRICE point. Easy transfer of gate to any position
fast and accurately. Precise one-to-one ratio
435-0080 K-TMPA/R $187.94
between dial and spindle. Easy to read large
format dial. Attaches strongly with the use of rare earth magnets.
K-16 Safe Repair Kit ORDER # ITEM # PRICE
These steel taper pins and corresponding ball 435-0120 K-ETD $377.20
bearings will prove invaluable when repairing
safes that have been drilled open. 5 sizes of
taper pins milled from bar steel to help you
repair drill holes from 1/8" to 1/2". Four sizes
of corresponding ball bearings to complete a professional repair.
Reorder numbers included.
Made in the USA.
435-0016 K-16 $108.91

Call, Toll Free
608 IC Core Staking Tool Titan Control Key

Tool to change cams for Rekeying Kwikset 6-Pin
Knobs & Deadbolts
444-0608 KSP 608 $18.39 ORDER # ITEM # PRICE
455-7255 87615-001 $1.79
138 Installation Kit

SmartKey Reset Cradle Designed to drill clean and accurate
The SmartKey Reset Cradle is a tool holes in all entry door materials, the
used to repair a SmartKey cylinder that Kwikset Professional Door Lock Instal-
has been programmed incorrectly. This lation kit features a large ergonomic
can occur if the cylinder will not turn in handle and tool free backset adjust-
either direction. Simple and easy to use. ment for easy setup on doors. No more
A must have for landlords or where there eye-balling for one-sided deadbolt
is a high possibility of lost keys. depth, a depth stop guide cuts to the
precise thickness of the lock. Universal
1. Before you begin, rotate lower dial
mortise tool adjusts for drilling both
to the right until it stops to align
2-1/8" and 1-1/2" door preps.
arrow on upper group with start point on inner dial.
Includes:
2. Insert cylinder all the way into the inner dial.
• Quick drill bit adapter • In line arm for wood doors
3. Rotate lower dial half-turn to the left until it stops • 1” heavy duty Dewalt spade • 2-1/8” hole saw for metal
where the two arrows meet. bit and fiberglass doors
4. Insert the SmartKey tool into the small hole on the • Aluminum template • 1-1/2” adapter ring
cylinder face. Push with force until it goes all the way in, measuring guide • Depth stop Guide
• Mortise tools (strike, latch, • Strike locator
LOCKSMITH TOOLS
then remove the SmartKey tool.
& 780) with square and • In line arm for metal and
5. Insert the key you want to learn in the plug, while round corner blades fiberglas doors
being sure not to rotate the plug. • Heavy duty it box • 1-1/2” multi-spur bit
6. Remove the plug from the reset cradle by gently pulling • 2-1/8” spade bit
on the key.
7. While holding the cylinder body stationary, rotate the
key back to the home position. 455-0138 138 KIT $767.22
8. Remove the key and reinstall cylinder in product.
455-3000 83060-001 $66.15

Kwikset Keying Kits
Majority of pins are Color Coded (pins
not color coded are different enough in
80152 Plug Follower size to tell apart). Anti-Pick Pins have
been added to provide greater security
ORDER # ITEM # PRICE with the Ultra Max Grade 1 Deadbolt.
455-1065 80152-01 $11.06 (NOTE: no more than 3 anti-pick pins
should be used in one cylinder at a time & only in the first 3
chambers.) Low Profile Deadbolt Spring Cover - used when
rekeying Society Brass Low Profile Deadbolt. Kit no longer
81467 Cylinder Removal Tool contains Depth Keys & Control Key Blanks (rekeying tool).
455-1467 81467-03 $2.66
455-0272 KWI 272 $320.94
LOCKSMITH TOOLS
Fax Your Order
.003 UNIVERSAL PINS

BOTTOM PINS
PRICE: $3.94 PK/150
ORDER # LENGTH ORDER # LENGTH ORDER # LENGTH
465-2126 .126 465-2186 .186 465-2246 .246

TOP PINS 465-2129 .129 465-2189 .189 465-2249 .249
ORDER # LENGTH ORDER # LENGTH ORDER # LENGTH 465-2132 .132 465-2192 .192 465-2252 .252
465-1024 .024 465-1075 .075 465-1126 .126 465-2135 .135 465-2195 .195 465-2255 .255
465-1027 .027 465-1078 .078 465-1129 .129 465-2138 .138 465-2198 .198 465-2258 .258
465-1030 .030 465-1081 .081 465-1132 .132 465-2141 .141 465-2201 .201 465-2261 .261
465-1033 .033 465-1084 .084 465-1135 .135 465-2144 .144 465-2204 .204 465-2264 .264
465-1036 .036 465-1087 .087 465-1138 .138 465-2147 .147 465-2207 .207 465-2267 .267
465-1039 .039 465-1090 .090 465-1141 .141 465-2150 .150 465-2210 .210 465-2270 .270
465-1042 .042 465-1093 .093 465-2153 .153 465-2213 213 465-2273 .273
465-1045 .045 465-1096 .096 465-2156 .156 465-2216 .216 465-2276 .276
465-1048 .048 465-1099 .099 465-2159 .159 465-2219 .219 465-2279 .279
465-1051 .051 465-1102 .102 465-2162 .162 465-2222 .222 465-2282 .282
465-1054 .054 465-1105 .105 465-2165 .165 465-2225 .225 465-2285 .285
465-1057 .057 465-1108 .108 465-2168 .168 465-2228 .228 465-2288 .288
465-1060 .060 465-1111 .111 465-2171 .171 465-2231 .231 465-2291 .291
465-1063 .063 465-1114 .114 465-2174 .174 465-2234 .234 465-2294 .294
465-1066 .066 465-1117 .117 465-2177 .177 465-2237 .237 465-2297 .297
465-1069 .069 465-1120 .120 465-2180 .180 465-2240 .240 465-2300 .300
465-1072 .072 465-1123 .123 465-2183 .183 465-2243 .243
LOCKSMITH TOOLS
.005 UNIVERSAL PINS

BOTTOM PINS
PRICE: $3.94 PK/150 ORDER # LENGTH ORDER # LENGTH ORDER # LENGTH
845-2115 115B 845-2210 210B 845-2305 305B

TOP PINS 845-2120 120B 845-2215 215B 845-2310 310B
ORDER # LENGTH ORDER # LENGTH ORDER # LENGTH 845-2125 125B 845-2220 220B 845-2315 315B
845-1010 10T 845-1100 100T 845-1180 180T 845-2130 130B 845-2225 225B 845-2320 320B
845-1015 10T 845-1105 100T 845-1185 185T 845-2135 135B 845-2230 230B 845-2325 325B
845-1020 10T 845-1110 110T 845-1190 190T 845-2140 140B 845-2235 235B 845-2330 330B
845-1025 10T 845-1115 115T 845-1195 195T 845-2145 145B 845-2240 240B 845-2335 335B
845-1030 10T 845-1120 120T 845-1200 200T 845-2150 150B 845-2245 245B 845-2340 340B
845-1035 10T 845-1125 125T 845-2155 155B 845-2250 250B 845-2345 345B
845-1040 10T 845-1130 130T 845-2160 160B 845-2255 255B 845-2350 350B
845-1045 10T 845-1135 135T 845-2165 165B 845-2260 260B 845-2355 355B
845-1050 10T 845-1140 140T 845-2170 170B 845-2265 265B 845-2360 360B
845-1055 10T 845-1145 145T 845-2175 175B 845-2270 270B
845-1060 10T 845-1150 150T 845-2180 180B 845-2275 275B
845-1065 10T 845-1155 155T 845-2185 185B 845-2280 280B
845-1070 10T 845-1160 160T 845-2190 190B 845-2285 285B
845-1075 10T 845-1165 165T 845-2195 195B 845-2290 290B
845-1080 10T 845-1170 170T 845-2200 200B 845-2295 295B
845-1090 10T 845-1175 175T 845-2205 205B 845-2300 300B

Call, Toll Free
BFK108 Interchangeable Core Kit (A2) Common Features for,

Contents: BFK108, KPK115, & SPK115:
• Master/Top Pins: Sizes 2-19 • New Wedge Box Design
• Bottom Pins: Sizes 0–9 • Dimensions:11-13/16" x 8-3/4" x 3-1/2"
• Spring Caps, 2 Styles, Machined • Heavy steel construction with HARDCOAT finish
and Stamped • Prevents Pin Migration
• Spring Covers for 6 & 7 Pin Cores • Makes kit truly portable
•2 Different Length Springs • Seal-tight Cover with Double Latch Protection
- 108B-Long (Best)
- 108F-Short (Falcon)
• LKGIC ICore Key Gauge for A2/A3/A4
KPK115 Kwikset Kit
Features: CONTAINS LAB BRAND ORIGINAL KWIKSET PINS
• New Tray with Extra Deep Tool Pocket to store your
Contents:
LAB Annex or other large ICore Tools.
• Brass Bottom Pins: 6 Sizes
• LAB Guaranteed Quality Pins
• Brass Master Pins: 6 Sizes
• Finest Quality Brass Raw material
• Brass Top Pins: 2 Sizes
• Universal Design suitable for all ICore Cylinders that
• Anti-Pick Top Pins (.160 &.180)
use Brass Key Blanks
• Stainless Steel Cylinder Springs
• Color-coded for Easy Identification and use
• Cylinder Removal Tool
ORDER # ITEM # PRICE • Plug Follower
465-0580 LAB BFK108 $225.00 Features:
• New Layout Chart includes Bitting Information
• Color-coded Pins
SPK115 Schlage Kit • Makes pinning easier
LOCKSMITH TOOLS
• Complies with New Industry Specifications
CONTAINS LAB BRAND ORIGINAL SCHLAGE PINS • Comprehensive Location Chart
Contents: • Up to date part Identification
• Large Capacity Parts Tray
• Nickel Silver Bottom Pins #0-9:
• Extra room for spare parts and tools
10 Sizes
• Brass Master Pins #2-9: 8 Sizes ORDER # ITEM # PRICE
• Brass Top Pins #1-3: 3 Sizes
465-0570 LAB KPK115 $174.00
• Cylinder Cap Pins & Springs
• Cylinder Springs (C503-113)
• “F” Series Top Pins (F506-451)
• “F” Series Compressible LAB Pin/Work Mat
Cylinder Springs (F506-453) Pin Block for keying cylinders
• LFT000 Plug Follower for Schlage Cylinders has been molded into the
lower left.
Features:
• New Layout Chart includes Bitting Information ORDER # ITEM # PRICE
• Comprehensive Location Chart 465-0010 LABMAT $54.00
• Up to date part identification
• Large Capacity Parts Tray Dimensions:
• Extra room for spare parts and tools 15-3/4” x 9-7/8” x 1/4”
465-0575 LAB SPK115 $246.00
LOCKSMITH TOOLS
Fax Your Order
LSK2N1 2-in-1 Keying Kit Mini DUR-X Pin Kits

for Schlage And Kwikset • Super Tuff Polyethylene
Features • Platform Design Insert
Contains only the specific sizes • Location Chart
required to service the original • Size: 7.5" x 4.5" x 1.5"
Manufacturer’s Cylinders. Each • Includes Springs & Pins (Only
Kit is constructed of steel with original manufacturer's pins)
HARDCOAT finish and Seal-Tight
Covers. ORDER # ITEM # FOR PRICE
LMD WSR
465-0535 LMD KWK Kwikset $102.00
Schlage Sizes Kwikset Sizes 465-0540 LMD SCH Schlage $102.00
10 - Nickel Silver Bottom Pins 6 - Brass Bottom Pins
8 - Brass Master Pins 6 - Brass Master Pins 465-0545 LMD SGT Sargent $102.00
3 - Brass Top Pins 2 - Brass Top Pins 465-0550 LMD YLE Yale $102.00
• Cylinder Springs • Cylinder Springs 465-0565 LMD WSR Weiser $102.00
465-2001 LAB LSK2N1 $240.00

Mini DUR-X Universal IC
Core Rekeying Kit
Mini Pin Kits for Repinning Interchangeable
Core A2 System
.003 Increments
Holds 81 sizes (pins included). ORDER # ITEM # PRICE
Top: .030 - .090. 465-0033 LMDICC $100.80

Bottom Crown: .156 - .333
LOCKSMITH TOOLS
465-1003 LAB LMK-003 $162.00

Dimensions: 8" x 6" DUR-X Semi Pro Universal
.005 Increments Ultra Thin: 5/8"
Rekeying Kits
Holds 81 sizes (pins included).
Top: .010 - .200. Bottom: .155 - .360 An excellent in-training
pin kit. Polyethylene
construction.
465-1005 LAB LMK-005 $162.00
DUR-X Series Professional ORDER # ITEM # SIZE # OF PRICE
Pin Kits SIZES
465-0505 LAB LDKU3 .003 102 $280.00

Polyethylene construction,
lightweight with center handle. 465-0520 LAB LDKZ3 .005 79 $270.00
Pull out tool drawer. Three double
secure latches. Seal tite construc-
tion.
ORDER # ITEM # SIZE # OF PRICE

SIZES
465-0510 LAB LDK005 .005 102 $350.00

465-0525 LAB LDK003 .003 124 $405.00

Call, Toll Free
Universal Classic Pro Pin Kit Woody Universal Pin Kit

.003 Increments with Metal Case Benchmate Wood Line Pin Kits
UNIVERSAL Pins - Master crafted quality construction.

"The New Standard" Triple latch; Natural full grain wood.
Universal kit, with color Center slide out drawer. Specially
coded pins for easy iden- designed "Oval" pin pockets for easy
tification. The lid of the finger tip pin selection.
generous size kit displays
pinning charts, one for each
of the most common lock manufacturers.
ORDER # ITEM # SIZE # OF PRICE
ORDER # ITEM # PRICE • 124 Pin Sizes SIZES
465-0500 LAB LWK003 .003 96 $476.00

465-0300 LPK003 $364.00 • 1 Spring size
• Tops: .010 - .200 465-0515 LAB LWK005 .005 91 $476.00
• Bottoms: .156 - .360
Wedge Pro Universal Super Wedge Pin Box with Tool

Rekeying Kits Drawer
• One Piece solid metal
• High Gloss Metallic construction
Emerald Green with gold • Tool Drawer
lettering & trim • Color Passport® Pin Chart
• Revolutionary "Wedge • Dura-view® pin tra
Shape" allowing a plain with longlife numbers
LOCKSMITH TOOLS
view of all pins from a sitting printed underneath the
position. insert.
• Color Passport™ Pin Chart - All numbers are color cod- • Emerald Wedge Design and Color.
ed to the corresponding pin size in the clear see-through • Pin Block and Vial not included.
plastic tray.
• Plastic Coated Chart prevents deterioration and allows Pins Included!
locksmith to write on and wipe off any information
needed.
• Clear Plastic Tray with new larger numbers inserted 465-0003 LAB EPD003 $330.00
underneath for easier reading and long life - they will 465-0005 LAB EPD005 $330.00
never wear off.
"The WEDGE™" most up-to-date technology for better
locksmithing. Consists of a metal box with green me-
tallic finish and gold logo and trim. The box measures LLT001 Lubricant
21-1/2" x 7-11/16" with a 10˚ angle (1-3/4" front and 3 Teflon powder, an absolutely
inch back). dry white lubricant. Nothing
to congeal or collect dust & dirt.
EPK 003: 003 increments in 124 sizes, top pins .010 to
.200 and bottom pins from .156 to .360. ORDER # ITEM # PRICE
EPK 005: 005 increments in 102 sizes, top pins .010 to 465-0240 LAB-LLT001 $33.60
.300 and bottom pins from .150 to .360.
465-0605 LAB EPK005 $345.00

465-0603 LAB EPK003 $345.00
LOCKSMITH TOOLS
Fax Your Order
Smart Wedge Universal Pin Kit Additional Features: LAB

40% SMALLER than the Universal Pin • 40% Smaller Size (21-1/2 x 7-7/8 vs 13-1/4
Kit! x 10-1/2)
• Oversized Pin and Spring Pockets - Holds up
Includes: to 200+ pins per size, 500 springs per size
• 3 Sizes of Spool Pins (J160, J165, J180) (over double the old capacity)
• Schlage "T" Pin for F Series Cylinders • Injected Molded Pin Tray
• Schlage "T" Pin Spring for F Series Cylinders • Famous Patented "Wedge" Design
• 2 New Type .115 Long and .115 Short • Large Tool Pocket
"Tangle Resistant Springs" • Large Slid-Out Tool Drawer
ORDER # ITEM # PRICE • 100% Larger Printing on Pin Tray
465-0610 LAB LSW003 $392.00
• New "Color Passport Pin Chart" - Updated
pinning information
465-0615 LAB LSW005 $392.00
LAB Brand Corbin Russwin LAB Brand BEST A2 Rekeying Kit

Rekeying Kit for Interchangeable Core BEST A2 Systems
System 70 DH and Z Features:
Class • Contains All Original Design
Pins for A-2 System
Features: • Brass Top Pins
• Contains All Original Design • Nickel Silver Bottom Pins
Pins for “509” and “552” Plugs • Springs & Caps
• Brass Top Pins • Exclusive Wedge Design
LOCKSMITH TOOLS
• Nickel Silver Bottom Pins • New large Pocket Design

• Standard Cylinder Spring • Dual View® Pin Tray
(Mfg# 172F217) • Exploded View Contents Chart
• I.C. Cylinder Spring (Mfg# 603F207) • Leakproof Seal-Tight Cover
• New Large Pocket Design • Top Pins 2B- 19B Brass
• Exclusive Wedge Design with 10o Angle • Bottom Pins 0A- 9A Nickel Silver
• Dual View® Pin Tray
• Comprehensive Pinning Information Chart Dual View® Pin Tray
• Leakproof Seal-Tight Cover Pin sizes are enlarged and printed under the clear plastic
tray, both above and inside the pin pockets for easy view-
Dual View® Pin Tray ing at all angles.
Pin sizes are enlarged and printed under the clear plastic ORDER # ITEM # PRICE
tray, both above and inside the pin pockets for easy view-
465-0590 LAB LIKIC $375.00
ing at all angles.
465-0585 LAB LIKCR $375.00 Curved Shim Stock

Flexible but tensile strength prevents
creasing when shimming lock cylinder.
Rustproof stainless steel, curved to
conform to shape of lock plugs. 25/pk
ORDER # ITEM # PRICE/25
465-0028 LAB SS-25 $7.50

Call, Toll Free
LAB Brand LAB

Pin Decoder for LAB Interchangeable Core
Medeco Biaxial Pins Annex® for SFIC
Identify and Sort Medeco Biaxial bottom pins Offers the simplest method for
according to Length, Angle, & Skew the loading and unloading of
interchangeable core pins,
Medeco Biaxial bottom pins are de- springs and caps, using only
signed to configure into 36 different one instrument for both
positions. Once removed from facto- functions. A second time
ry packaging, it is almost impossible
saving feature is a Slideout
to accurately identify the position
Code Book below the area where the plug or core is slid
an individual pin represents.
into place. This allows the user to unload the plug of pins,
Additional Features springs and caps into a confined area without spilling
• Accurately measures/identifies parts in or around the work area. The Slideout Code Book
master and driver pin lengths also can be used to retain pin stacks (combinations), al-
• Determines key cut depths lowing you to identify the control pins.
• Identifies fore and aft key cut positions
• Patent Pending • Capping Instrument • Pin-Stack Evictor
• with Slideout Code Book • Patent pending
465-0620 LAB LPDMED $100.00 ORDER # ITEM # PRICE
465-4008 LAB LICCB $276.00
Pin Kit Refill Pack

Wood Block Pinning Tray
.003 Increment Pins: • Made of Maple
124 packs/50 per pack of LAB tumbler
LOCKSMITH TOOLS
• Holds 5 Plugs
pins. Tops: 010 - .200
• Great for Repinning Multiple
Bottoms: .156 - .360
Cylinders, Master and
ORDER # ITEM # PRICE Grand Master Pinning
465-0013 LAB LPP003 $238.00 • Measures 4" x 4-1/2"
.005 Increment Pins: 465-0530 LAB LPB001 $48.00
102 packs/50 per pack of LAB tumbler pins.
Tops: 010 - .300 Bottoms: .150 - .360
ORDER # ITEM # PRICE IC Core Slide Chart
465-0015 LAB LPP005 $204.00 Handy pinning chart (master keying too) for Arrow,
Best, Eagle & Falcon interchangeable core cylinders.
Cylinder Cap Removers

Use short end for Schlage, long end for Weiser-Falcon.
465-0250 LAB LCR005 $58.80 This is an

AWESOME tool!
465-0247 LAB LSC001 $28.00 - Jason S.
LOCKSMITH TOOLS
Fax Your Order
ADA/FG LCN ADA Force Gauge LOCITOOL-LA for LA locks

A reference tool that can be used to measure the opening Mounting tool for La-locks. The
and closing force on door openings in order to meet ADA Locitool has an M3 Allen key
requirements. for the adjustment of the
bolts and fixing of the handles. The M6
Allen key fits all Locinox mounting bolts. The screwdriver can
be used to change the cylinder, open the lock box or change the
• Up to 35 lbs of compressive force measurement makes it latch bolt from right to left hand.
suitable for a wide range of applications Features
• Compact Size makes it easy to store and transport - can • M3 (1/8”) Allen wrench for latch, dead bolts and handles
be put in a tool box, desk drawer, or a shirt pocket. • M6 (1/8”) Allen wrench for the lock mounting bolts
• Phillips screwdriver to change the self-latching bolt, cylinder
• Quick measurement - takes only seconds per door. and lockbox
• Cost-effective
ORDER # ITEM PRICE
• Device is for reference only.
492-0110 LCX LOCITOOL-LA $12.60
Includes: ADA Accessibility Gauge, Protective clear plastic
tube with plastic end cap, Instruction sheet.
LOCITOOL-LB for Gate Closers
460-1000 LCN ADA/FG $85.40 Mounting tool for Gate Closers. The
Locitool has an M3 allen key for the
adjustment of the closing speed
LCN Spray Paint and power of the Samson-2 Gate Closer.
With the M4 allen key you can adjust the closing
Dark Bronze Spray Paint for Door Closers power of the Verticlose Gate closer. The M5 allen key is
used for the Quick-Fix fixation.
Features
LOCKSMITH TOOLS
460-2000 LCN DKBRZ 695 $40.60 • M3 (1/8”) Allen wrench for closing speed and power Samson
• M4 (3/16”) Allen wrench for Verticlose
• M5 (3/16”) Allen wrench for the Quick-fix fixation
ORDER # ITEM PRICE
492-0115 LCX LOCITOOL-LB $12.60
DRILLVISE-4 Tool Box with 4 Locinox TIGER DRILL Tool Case

Clamps with Drilling Jig
Toolbox with set of 4 clamps to fix drill tools and accessories for Tool case with installation and drilling
assembly or installation. Perfect when combined with Tigerdrill. jig to perfectly align and install the Tiger
Features gate closer and its Puma hinge. This
• Solid plastic box with compartments tool guarantees perfect alignment
for convenient storage and a fast and easy installation. No
• 4 special clamps with 30-120mm measuring needed!
adjustability Features
• Strong steel clamp with padding • Includes 2 drill bits: Ø 3/16” or Ø 5/8”
to avoid damage • Spare set with 10 Quick-Fix expanders
• Soft plastic mounting surfaces • Comes in a sleek and sturdy case with different components
guarantee a perfect grip • Includes accessories for assembly and adjustment of Tiger
without risk of damage • Recommended to be combined with DrillVise-IV
ORDER # ITEM PRICE ORDER # ITEM PRICE
492-0105 LCX DRILLVISE-4 $164.48 492-0120 LCX TIGER DRILL $122.58

Call, Toll Free
DRILLFIX Tool Case with Drilling Jig Features

Quickly and accurately install Locinox locks and keeps with the • Tool case with self-centering drilling tool
new DrillFix jig. Designed to self-center on square or round posts, • Drill jig can be used for round and
and guarantees perfect alignment. This will allow you to easily rectangular profiles from 1-1/4” up to 3”
drill the 4 hole pattern for the lock or the two holes necessary • Includes 3 drill bits (Ø 9,5 mm,
for the keeper. The DrillFix comes in a sleek and sturdy case that Ø 15 mm, Ø 18 mm)
includes all the necessary accessories to install Locinox lock. • Includes Locitool – 3015LA
• Includes Allen Key and
ORDER # ITEM PRICE positioning pin
492-0100 LCX DRILLFIX $122.64
Primo 12-in-1 Multi-Tool Car Safety Escape Tool

Strong ABS/alloy emergency window
Compact design easily stows away
breaker is a must for any car. Use
on backpacks, bike bags, EDC kits,
hammer to shatter car side window
and belt loops. Stainless steel con-
in the event of an emergency. Built-in safety whistle to call for
struction. 12 Functions including:
help. Built-in safety cutter for cutting seat belts. 1 per card.
Flathead & Phillips screwdrivers,
dull knife, bottle opener, ruler, ORDER # ITEM # PRICE
wrenches #7, 8, 10, and 12, wire stripper, 1/4" bit driver, and 510-3430 U10501 $5.30
spoke wrench
510-3415 U10101 $13.50 Wallet 11-in-1 Multi-Tool

Credit Card Survival Tool easily fits in
LOCKSMITH TOOLS
your wallet, pocket, purse, or a small
Puma 11-in-1 Multi-Tool compartment. Stainless steel construction,
Small compact multi-tool easily attaches to protective sheath included. 11 Functions
keychain, bags, belt loops, or EDC kits. Stain- Including: Screwdriver, Ruler, Knife Edge,
less steel construction Can Opener, Bottle Opener, Saw Blade, But-
11 Functions Including: 4-size terfly Wrench, 4-Position Wrench, Key Ring,
Spanner Wrench, Glass Breaker, Wrench and Ancillary Direction Indicator
Bottle Opener, Philips and Flathead Screw-
drivers, Carabiner Clip, Cell Phone Stand,
Spoke Wrench 510-3435 U10601 1/cd, 5/pk $3.22
510-3420 U10301 $8.64

Snapper Multi-Tool
Small compact multi-tool easily
Compact Micro Tool attaches to keychain, bags, belt
Multi-Tool with clip, easily attaches loops, or EDC kits. Unique compact
to keychain. Unique compact folding design lies flat in pock-
design is perfect for stowing in ets. Spring-loaded pliers for easy
small tool or saddle bags. one-handed operation. Stainless steel
Stainless steel construction. construction. 6 Functions Including: Serrated needle nose pliers,
6 Functions Including: Knife, Nail File, Nail Cleaner, Scissors, Wire Stripper, Knife, Phillips Screwdriver, Flathead Screwdriver,
Mini Flathead Screwdriver, Bottle Opener. Nail File
510-3425 U10401 $7.02 510-3440 U10701 1/cd, 5/pk $9.08
LOCKSMITH TOOLS
Fax Your Order
Nano LED Light Pocket Tool Keychain

Lightweight LED Nano Flashlight for your Lightweight, durable steel-plated
keychain. 5 lumens. (3) LR41 batteries screwdriver bit keychain. The key
are included and are easy to replace. body fits ¼” head hex wrench for
Tough aluminum body withstands maximum torque. The perfect tool
crushing. Assorted black and silver. for quick fixes and access to your
Supplied 1 per card, 5cd/pack favorite beverage. Includes: Phillips Screwdriver, Flathead
Size: 1-3/4” (L) x 3/8” (W) x 3/8” (D) Screwdriver, and Aluminum Bottle Opener
510-3445 U11101 1/cd, 5/pk $4.32 510-3510 U32201 1/cd, 5/pk $6.16
LED USB Torch Light Thumb Lite™ Micro LED

USB rechargeable lithium ion Attaches to: screwdrivers, tape measures,
battery. Deluxe ABS water-resis- inside cabinets, pet leashes, keys,
tant body. 25 lumen LED light. 120 car, remotes & power cords. Turn
minutes of light per 15 minute your key into a flashlight for faster,
charge. Assorted blue, red, yellow. Perfect addition to your safer entries. The button-sized light features a bright white
keychain or EDC kit! Size: 2” (L) x 7/8” (D) With key- LED light that is built to last. Uses two LR41 batteries. To
chain: 3-3/4” (L) install, simply peel the tape off the back and stick it to a
clean, dry surface.
510-3450 U11201 1/cd, 5/pk $8.20
510-3530 U90701 1/cd, 5/pk $5.14
LOCKSMITH TOOLS
C-Clip™ Pocket Knife

Small pocket knife with integrated C-Clip™, Pocket Clip Multi-Tool
easily clips onto belt loops and bags. Safety Suspension style keychain easily attaches
liner lock feature when knife is in the to belt or pocket. Stainless steel
open position. Aluminum and construction. 4 Functions Including:
stainless steel construction. 3 Hex Wrenches and Bottle Opener.
Assorted black and blue. ORDER # ITEM # PRICE
Blade: 1-3/4”(L)
510-3500 U13001 1/cd, 5/pk $3.78
510-3455 U12101 1/cd, 5/pk $6.92
Precision Pen Screwdriver

Rugged anodized aluminum, pen-style
8-tip screwdriver with housing
and pocket clip. Quick-change
magnetic bit holder.
Convenient bit storage inside.
Flathead 2.0, 2.5, 3.0, 3.5mm.
Phillips PH00, PH000, PH1, PH2.
510-3460 U12201 1/cd, 5/pk $8.64

Call, Toll Free
Mortise Cylinder Drill Guide Installation Drill Guide

Until now, installing a mortise for Schlage, Corbin, Arrow & General
cylinder in the proper location Grade 1 Cylinders
was a hit or miss proposition. An all-around tool for ADA
The HIT-22, it will always be in the mandated retrofits. Fits 1-3/8"
right spot. Simply mark where the cylinder to 2" doors with a standard 2-3/4"
should go on the door and drill a 1/2" hole. Place the HIT- backset. Machined from 6061
22 in the lock like a mortise cylinder, tighten the mounting aluminum with hardened steel
screw and install the lock in the door. You will see the drill guides. Throughbolts can be drilled in one easy step
guide through the 1/2" hole in the door. Insert a 1-1/4" because HIT's backplate protects the door from splinter-
hole saw in the guide and drill the cylinder hole. Includes ing. Jig attaches to the door and permits easy location of
two drill guides, hole saw pilot and extractor handle. all drill points; the throughbolt holes and anchor plate
ORDER # ITEM # PRICE lugs can then be quickly and accurately drilled, sparing
527-0175 MAJ HIT-22 $99.00 the usual laborious measuring and recalculating of hole
locations.
Lock Mounting Brackets 527-0001 MAJ HIT-111 $487.00

Install Cylindrical Knob Locks or Deadbolts on
Metal Doors Faster and Easier Than Ever!
Stamped from 12 gauge cold rolled Fiber Optic Attachment
steel for strength, installed with A Handy Tool That Makes Jobs Easier!
pop-rivets for convenience, Installs by simply sliding the rubber boot over the
and supplied with an adhesive end of your mini-flashlight. Adjustable focus from
template for accuracy. Cut out in flashlight will vary light intensity. No bulbs to burn
out or break. Fits most AA aluminum flashlights.
LOCKSMITH TOOLS
the center to allow installations on metal doors with a
center seam. Marked for 1 and 1-1/8" faceplate cutouts
ORDER # ITEM # LENGTH PRICE
as well as for bracket mounting holes and center lines to
527-0170 MAJ FOA-7 7" $29.00
locate the crossbore. Complete with template and steel
pop-rivets.
LMB-01 for Tubular Latch in Hollow Metal Door Schlage Service Tool
ORDER # ITEM # PRICE Side "A" will easily remove the threaded
527-0240 MAJ LMB-01 $15.80 cap from Schlage cylinders including
the new "B" series with the longer
cam driver. The "B" side is used to
depress the cylinder cap pin and turn the tailpiece on
Punch & Die Sets Schlage "A" series locks so the knob retainer can be
depressed, and the knob removed. This method is used
Punches a DOUBLE “D” hole
when a key is not available.
in sheet metal cabinet draw-
ers and doors. A must have ORDER # ITEM # PRICE
tool for the locksmith working on vending machines, lock- 527-0250 MAJ SCT-1 $71.80
ers, metal cabinets or any type of sheet metal door made
with 18 gauge (.048) or lighter steel. To use, simply drill
a 3/8” hole centered where the cam lock is to be installed,
slide the punch through the hole and tighten down the
hex nub with a 11/16” wrench. Punches a DOUBLE “D”
hole size .645 wide by .770 high.
527-0305 MAJ MDPS-4 Standard $296.40
LOCKSMITH TOOLS
Fax Your Order
HIT-41 SERIES MODULAR INSTALLATION SYSTEM

HIT-45 SERIES
FOR DOOR HARDWARE
Router Template for Adams
Rite 7100 & 7400 Electric Strike HIT-45 Modular Clamp
At the center of this new installation system is
in Aluminum Doors & Frames the HIT-45 modular clamp. Works on aluminum,
4-7/8" ASA Strike. Requires a router with a wooden or hollow metal doors. Has a grip range
from 1-1/4" to over 2-1/4". Clamping pressure is
3/8" outside diameter guide & a 1/4" router bit.
positive with the HIT-45 always being self cen-
ORDER # ITEM # PRICE tering by design. Works with any router or drill
527-0180 MAJ HIT-41AR1 $359.00 template shown. Perfect backset calculated from
center of door for FLAT, BEVELED, RADIUS.
Multi-Purpose Nut B
527-0185 MAJ HIT-45 $615.50
Driver
Companion tool to HIT-1. Provides HIT-45AR1 Faceplate Opening Template
Use this template and HIT-45 Clamp to route 1" x
better grip & control when tight- A 6-7/8" faceplate openings used for Adams Rite locks
ening the locking nut on the inside and latches. Requires use of router equiped with 3/8"
sleeve, than the plastic tool provid- outside diameter guide and a 1/4" router bit.
ed by the manufacturer. Machined A: for Schlage Rhodes
Aluminum. B: for ASSA Brooklyn,
527-0190 MAJ HIT-45AR1 $103.50
ORDER # ITEM # PRICE Arrow Sierra, Sargent
LN.
527-0002 MAJ HIT-2 $80.60
HIT-45AR4 Cylinder & Handle Hole
Template
Route cylinder and handle or paddle holes for
Pit-Bull Mortising Tool for Hollow
LOCKSMITH TOOLS
Adams Rite locks and latches with a 31/32" or

Metal Steel Doors 1-1/8" backset. Will also locate mounting holes
for handles and paddles with hardened drill
Latch forming tool for lock installations, bushings. Requires HIT-45 Clamp and router
for use on standard steel doors. The Pit equipped with 3/8" outside diameter guide and
Bull tool is used to form a rectangular 1/4" router bit.
pocket in the edge of a hollow metal ORDER # ITEM # PRICE
door. Application of the tool is almost
527-0205 MAJ HIT-45AR4 $211.10
effortless, simply drill the latch and
cross bore holes and install the Pit Bull. Using a few turns
with a wrench will squeeze an indentation into the door's HIT-45ML1 Mortise Lock
edge. The result is a pocket that will accept both 1" and 1 Positioning Fixture
1/8" wide by 2 1/4" tall latches. Not for use on doors with Two piece positioning fixture used when install-
a center seam. ing mortise locks. Using this tool will put the
HIT-45 Clamp in the correct location and will
ORDER # ITEM # PRICE assure accurate installations every time.
602-0900 MAJ MDLT-1 $364.30 ORDER # ITEM # PRICE
527-0210 MAJ HIT-45ML1 $177.50
HIT-45RB4 Router Bits

Special Titanium Coated 1/4" Down Shear Router Bit is
used to route openings in aluminum doors and frames.
527-0215 MAJ HIT-45RB4 $67.50

Call, Toll Free
Screw Assortment Kit TAD03L Locksmiths Hole Saw Kit

An assortment containing 18 of
the most commonly used and Contents:
misplaced screws that are required Four PD4 pilot drills. One each of the following:
when servicing locks. Contains MHSA12C (3/4"); MHSA28C (1-3/4");
mortise cylinder cam screws,
MHSA14C (7/8"); MHSA34C (2-1/8")
cylinder set screws, face plate screws
and others that cat be missing or lost MHSA16C (1"); SD10 (Screwdriver)
when on the job. Allen wrenches need for the allen screw in the MHSA22C (1-3/8")
kit are also included. This handy assortment will pay for itself MHSA24C (1-1/2");
the first time it is used. MHSA26C (1-5/8");
527-0245 MAJ LSA-1 $90.50
590-0030 TAD03L $379.50
Cylinder Accessory Kit AVAILABLE SEPARATELY

Contains an assortment of popular
hardened cylinder gards, plus cylinder MHSA14C
ORDER # ITEM # SIZE PRICE
collars molded from an "Engineered
Plastic". Unlike steel or aluminum that 590-0004 PD-4 Pilot Drill $7.20
can chip, scratch or bend, collars from 590-0014 MHSA14C 7/8" $27.40
engineered plastic will not loose their 590-0015 MHSA15C 15/16" $27.40
finish or shape. They also resist damage due to the ozone and
by ultra violet rays. The kit is packed in a handy plastic box for 590-0016 MHSA16C 1" $28.76
storage and part numbers are identified for reordering. Cylinder 590-0018 MHSA18C 1-1/8" $28.76
collar refills are available in packs of 6. A handy assortment for 590-0024 MHSA24C 1-1/2" $30.92
mobile use! MHSA16C
590-0026 MHSA26C 1-5/8" $30.92
LOCKSMITH TOOLS
ORDER # ITEM # PRICE 590-0034 MHSA34C 2-1/8" $46.79
527-0130 MAJ CAK-15 $205.00
MHSA34C
376 Universal Pin Tool

Produces a custom-
pinned lock in just minutes.
The hand-held keying tool is
for on-site use with Universal Pin padlocks and requires a ham-
mer for proper operation. Set the cylinder of an uncoded "UP" File Handles
padlock with the tap of a hammer. ORDER # ITEM # OPENING PRICE
625-0020 NIC-2 21494 1/4" $4.08

Keying Instructions
1. Choose original Master padlock key to be used and remove
from ring.
2. Insert key into Master "UP" Series lock.
3. Invert padlock thru the jaws of your bench vise. Do not tight-
en vise.
4. Place Keying Tool over key & tap with hammer until cylinder
Files
pins shear. ORDER # ITEM # SIZE/TYPE FITS HANDLE PRICE
5. Remove padlock from vise and check for proper operation. 625-0016 NIC-PIP-6 6" Pippin NIC-1 $105.58
ORDER # ITEM # PRICE 625-0004 NIC-WBF-4 4" Warding NIC-2 $14.98
555-5376 MAS 376 $76.69 625-0006 NIC-WBF-6 6" Warding NIC-1 $18.66
LOCKSMITH TOOLS
Fax Your Order
NSP Keying Kits Hurricane Door Upgrade Kit

Allows you to maintain a key
Plastic Coated
system without having to buy
Passport™
the more expensive 1-1/2"
Protects your chart from
mortise cylinders.
being soiled or worn. Can
be written on with non-per- Enlarge the size of the cross
manent marker and erased. bore just enough for the ring to
Pin numbers on the chart are color-coded to match the fit in the frame and the face of
actual color of the pin in the kit. your cylinder will be just below the surface of the frame.
Hard Coat™ is a new metallic green paint that provides Works with Medeco and Schlage Primus/Everest cylinders.
the best protective finish available. Kit includes: • Blank cylinder, predrilled
Dura View™ Pin Tray is clear heavy-duty with larger • Two cylinder rings • Two wavy rings
print numbers that will never wear out. • 1-9/16" hole saw • 1/4" smooth Pilot bit
Pin Tolerances provides the "closest tolerance" Univer- ORDER # ITEM # PRICE
sal .005 or .003 pins manufactured. 845-8000 Hurricane Upgrade Kit $99.90
Easy access pin compartments all on one level.
.003: Top pins .010 - .200 • Bottom pins .156 - .360 Hurricane Door Upgrade Rings
.005: Top pins .010 - .300 • Bottom pins .150 - .360 Two cylinder rings and two wavy rings.
Once you own the Upgrade Kit, just buy the extra rings.
ORDER # PIN INCREMENTS PRICE
845-1005 NSP .005 $312.00
845-9000 Hurricane Upgrade Rings $50.00
845-1003 NSP .003 $312.00
LOCKSMITH TOOLS
HG SERIES Standard Wafer Cam

Tungsten Carbide Lock Keying Kits
Hole Saws SOU-S-SLK-401
OTHER SIZES AVAILABLE
Same as CRK-30 kit
Product Overview
BY FACTORY ORDER
• This Hole Saw can easily ORDER # ITEM # PRICE
and quickly perforate hard materials up to 3/16 inches. 845-0401 SLK-401 $46.70
• With its extremely sharp Tungsten Carbide tipped cutting
edges it can be run at higher feed rates and speeds to create
holes of exceptional quality and accuracy.
• The slug is spring ejected when cutting is finished.
• This type hole saw can be used on drill presses and electric
hand drills.
Applications: • Stainless Steel • Alloy Steel • Iron
• Copper • Aluminum • Brass • F.R.P.
Ideal for: • Locksmiths • Plumbers
Lub-A-Spray
• Electricians • Contractors Dry Graphite Lubricant. 6.5 grams,
12 to a box.
ORDER # ITEM # SIZE PRICE
845-6050 HG602540 1" $48.00 645-0300 PAN-L300 $41.82/dz
845-6060 HG605398 2-1/8" $100.20

Call, Toll Free
30% Savings Over Purchasing Individual Tools! AK04 Professional Kit

AKCOM00 Complete Tool Kit The Professional Kit is a perfect solution if you are out-
Never be without fitting a van, need a spare kit for the shop, or if you’re
the right tool again! just getting started in the auto lockout business. The low
When you just can't cost and versatility make this an ideal starter kit. Packed
get your fill of car in a durable vinyl case with a tool usage and instruction
opening tools, get booklet. 10 piece set.
the Complete Tool Tools: AO01, AO04, AO10, AO20, AO25, AO34, AO35
Kit. This kit contains Book: AO95 Case: AO52 Wedge: AO60
one of each of our
car opening tools; 5 Lifetime Warranty against manufacturer’s defect
slim jims, 7 MCOT tools, long reach tool and all of our spe-
cialty tools along with a selection of wedges. Packaged in
our heavy duty deluxe zippered cordura case with divided 684-0005 AK04 $141.20
sections inside and sturdy handles to make transportation
easy. Includes our own Tool Usage and Instruction Booklet.
47 piece set. Professional Series
Tools: AO01, AO03, AO04, AO07, AO10, AO11, AO12, Universal Clamp
AO13, AO14, AO16, AO17, AO18, AO20, AO21, AO25, Easy to use on 1-3/4” wood
AO26, AO29, AO30, AO31, AO32, AO33, AO34, AO35, or metal doors with a 2-3/4”
AO36, AO37, AO38, AO39, AO40, AO41, AO42, AO42SL, backset or adjustable for other
AO43, AO44, AO45, AO47, AO48, AO49, AO84, AO85, size doors with adapter acces-
AOCO sories.
Book: AO95 Case: AO56 Wedges: AO60, AO61, AO63 ORDER # ITEM # PRICE
Lifetime Warranty against manufacturer’s defect
LOCKSMITH TOOLS
684-0730 INCL-PRO $398.00
684-0022 AKCOM00 $802.20

Large Comb Lock Pick w/ Handle
No-Spill Key Hooks

Holds 25-30 blanks per hook. Improved design eliminates Superior quality lock picking tool manufactured of tem-
breaking & dropping. pered stainless steel; deburred and burnished to a soft
luster. Rust proof with smooth rivetless construction mak-
ORDER # ITEM # PRICE ing them the strongest most durable picks available. The
684-0280 KHBL Blue $47.80 most basic lock picking tool a professional might need if
the lock is to be picked in the traditional sense rather than
684-0285 KHBR Brown $47.80
opened by raking or using a pick gun.
684-0281 KHTE Teal $47.80 100 hooks
per bag ORDER # ITEM # PRICE
684-0735 PKX-LC-H $4.50
LOCKSMITH TOOLS
Fax Your Order
Pro-Glo Light 13-Piece Mega Long Reach

Uses a suction cup to rest on the Car Opening Tool Kit
exterior of vehicle’s windshield Includes:
illuminating the desired work area. • AO42-LA • AO86
Features 6 powerful and uniquely
• AO65 • AO64A
angled LCD lights.
• AO10 • Pick Starter
• AO67 Kit (2 picks
684-0745 AL6000 $99.90
• AO60AO42SL & 1 tension
• AO68 wrench)
2-Cell Hardbody Car Opening Light

684-0750 AK42-MEGA $192.74

Made from machined aluminum,
they are lightweight and versatile.
The Hardbody is turned on through
a connection from the end of the
wand to the head of the body. 18-Piece Ultra Combo Kit
Connect the Hardbody and it's on. Includes:
Comes with a carrying case, a suction cup clip - to hold it
• AO25
steady against the window, and a translucent sleeve bulb pro-
tector. Complete with a Lifetime Warranty (excluding bulb). • AO35
• AO38
• AO39
684-0035 AL10500 $73.40
2 AA-Cell Broad Spectrum Bulb • AO42-QC1
LOCKSMITH TOOLS
• AO42-M1
• AO42- • AO65-A1 • AO64
M2AO42-M3 • AO95 • AO67
Lock & Safe Scope
This scope throws a strong beam of light, great for reading • AO42SL • AO65
wafers and safe work. Made of impact resistant plastic. ORDER # ITEM # PRICE
Comes with 3 tips, carrying case, and batteries. 684-0755 AKUC $379.90
684-0370 LT1202 $79.80
13-Piece Long Reach Combo Kit

Includes:
• AO42-QC1
• AO42-QC2
• AO42-M1
• AO42-M2
• AO42-M3AO42SL
• AO95 • AO64
• AO65 • AO67
684-0710 AKUL $279.90

Call, Toll Free
Slide Lock Tool Two tools in one. Opens both hori- Toyota Tool Perfect for opening the newer Toyotas
zontal locking devices & vertical buttons. with the metal boxes guarding the bellcrank.
684-0105 AO01 $32.50 684-0145 AO21 $27.80
Gas Cap Key Use this tool to open almost any locked EZ Slim Jim Medium thickness. Stainless steel.
gas cap. Use tool like a pick. 1” x 25” x .042” thick.
684-0110 AO04 $11.20 684-0715 AO25 $20.00
Astro Tool Opens Chevy Astro Van; several GM cars. Dual Tool Two tools in one. Opens many types of foreign
The hook and reach make this tool extremely useful. & domestic vehicles like the Mazda RX7 & Suburu.
684-0115 AO07 $19.20 684-0155 AO29 $27.80
Original Slim Jim This is the Original Slim Jim MCOT Tool The original Multi-Car Opening Tool.
and still the best. Stainless steel. Goes under the window and inside to open the door.
684-0120 AO10 $18.40 684-0170 AO34 $27.80
LOCKSMITH TOOLS
Super Slim Jim Wider and thicker than the original. MCOT Wide Use on cars with wide door panels
Opens many foreign and domestic vehicles. Stainless steel. and cars where you push or pull.
684-0125 AO11 $19.40
684-0175 AO35 $27.80
Under the Handle Tool Used to push horizontal

and vertical linkages accessed behind "pull up" type handles. MCOT Long The longest MCOT allows maximum
reach. Use on GM & other products.
684-0130 AO13 $19.20 ORDER # ITEM # PRICE
684-0180 AO36 $27.80
Vent Window Mini Set Operate the vent

windows on car, truck and van doors. With 2 tools. Long Reach Tool Across-the-car entry tool. Allows
ORDER # ITEM # PRICE to reach an activator on opposite door or retrieve the keys.
684-0135 AO14 $20.80 ORDER # ITEM # PRICE
684-0205 AO42 $56.20

Loop-D-Loop for most BMW, Volvo, Mercedes
Fed in under the window, the 'loop' is fixed around the 58" Long Arm Tool Soft vinyl tip allows for easy
smooth or mushroom style button head and pulled tight, lock manipulation.
then lifted up to unlock. Double ended, two reach-in-
lengths.
684-0720 AO42-LA $51.90
684-0590 AO45 $35.00
LOCKSMITH TOOLS
Fax Your Order
Double Sided Wedge MAEZ2 Full Color EZ Picking

Made of high impact plastic. Different Manual PRO LOCK
height on each side allows you to adjust
to doors with varying flexibilities. The MAEZ2, Lock Picking Manual, is packed
with full color cut-away illustrations and de-
tailed instructions. The lock picking manual
684-0215 AO60 $13.92 is clearly written, making it easy to under-
stand the science of lock picking. The E-Z
Picking Manual includes more than 100
HD Rubber Wedge pages of the best information ever written
Made of heavy-duty non-marking high on lock picking.
grade rubber.
684-0340 MAEZ2 $75.60
684-0220 AO61 $23.60
Deluxe Zippered Case for

Mini Wedge Duo
These plastic Wedges make wedging Car Opening Tools
even tight doors easy. Two sturdy loop handles, four
ORDER # ITEM # PRICE individual storage compartments,
684-0230 AO64 $18.40 unique Tool Positioners, a full
length hefty zipper and heavy
duty nylon cloth combine to store
and protect your lockout tools*. The
Euro Strip versatile design lets you arrange your
Flexible tool allows you to bypass tools in any layout. Double panel keeps wire or flat tools
LOCKSMITH TOOLS
doors on Mercedes, BMW, & Volvo. in position with our exclusive Velcro type Tool Positioners.
Get this and get organized! *Tools not included.
684-0235 AO85 $36.20
684-0595 AO56 $72.20
Pump Wedge
Size: 6.25 width x 5.5” length.
The Keycheck
Find the Right Blank Every Time!
684-0725 AO65 $63.00 Allows you to verify that you are
duplicating a customer's key on
the correct blank. Great for de-
termining those difficult sectional
keyways. Excellent tool for new
employees or those who are not
expert at the key board. Saves
wasted work and dissatisfied customers.
684-0380 LT300 $78.80

Call, Toll Free
PKX-11 Pick Set 11 Picks & Case PKX-62 Pick Set 62 Picks & Case
Set includes 3 picks with stainless Open the quality zippered leath-
steel handles, 3 standard picks, a er case and you'll find the finest
double ended slim line pick, bro- lock picks made. The PKX-62
ken key extractor and 3 tension includes an array of hooks, dia-
wrenches in soft luggage quality monds, balls, rakes, and broken
leather snap case. key extractors manufactured
of tempered stainless steel and features rivetless stainless
steel handles that provide maximum picking comfort, six
684-0455 PKX-11 $39.90 tension wrenches, and a PKX-WP5 warded pick set.
684-0470 PKX-62 $241.60

PKX-14 Pick Set 14 Picks & Case
Popular pick set comes with 9
picks and a broken key extractor, Padlock Shim Pick Set
all manufactured of tempered A simple option to picking on many
stainless steel and all with padlock styles. Many o f the most com-
rivetless stainless steel handles, monly used less expensive laminated
4 tension wrenches in a soft lug- and solid body padlocks can be opened
gage quality leather snap case. in seconds by circumventing the shackle
ORDER # ITEM # PRICE locking points with these shims. The set
684-0450 PKX-14 $53.90 contains 5 each of four different sizes.
684-0550 PKPS $45.80

PKX-20 Pick Set 20 Picks & Case
LOCKSMITH TOOLS
This set contains 14 assorted picks
(6 with rivetless stainless steel ACE TOOLS
handles), a broken key extractor Deluxe Tubular Ace Pick
and 5 tension wrenches in a soft Locks can be picked by 2 methods
luggage quality zipper leather (each pin individually or all at once).
case. Picks left hand, right hand and center.
ORDER # ITEM # PRICE Comes with its own decoder.
684-0460 PKX-20 $83.90 Aluminum and 12L14 steel, 1095
carbon spring steel picks. Comes in a
custom wooden storage box specially
designed to protect your tool to last a
PKX-32 Pick Set 32 Picks & Case lifetime. Similar to the old “Lee Pick”.
This large set includes a vari-
ety of tempered stainless steel ORDER # ITEM # PRICE
hooks, rakes, balls, diamonds, 684-0490 PKA2 $546.00

key extractors, and tension
wrenches in a soft luggage quali-
ty zippered leather case. Standard Impressioning Tool
ORDER # ITEM # PRICE Makes impressioning faster and easier. Maintains
684-0465 PKX-32 $135.90 a true centerline and grips the key so it
can't slip.
684-0425 LT700 $77.00
LOCKSMITH TOOLS
Fax Your Order
ACE TOOLS Window Crank Tool

7-Pin Tubular Pick Makes removal of window cranks
The 7-Pin Ace Pick is a precision easy without damage to the door
tool designed to easily open any standard panel. Slip the tool behind the
7-pin center type lock. Set tension, insert, and crank and push the retaining clip
rotate back and forth until the cylinder turns. Simple to off the shaft.
use and comes with depth decoder. Features include a ORDER # ITEM # PRICE
hard steel body, smooth sliding picking needles, knurled 684-0415 LT460 $16.00
brass handles, and vinyl sleeves for those who prefer the
feel of rubber handles.
Schlage Rhodes Nut Tool
Replaces the nut driver that Schlage provides
684-0475 PKX-A1 $179.00
with the Rhodes lock. Made from aluminum
and its easy-to-grip design will allow you
to quickly hand tighten the inside
Electric Pick Gun
escutcheon nut.
Allows you to pick a wide vari-
ety of locks. Comes with 3 tips ORDER # ITEM # PRICE
and a tension wrench. 684-0420 LT500 $54.60

684-0480 PKXGUN-E $314.00 Master Pin Followers

Versatile follower can be used for rekeying
most common commercial and residential lock
Manual Pick Gun cylinders. Also allows upper chamber master
The best pick gun available for open- pin removal with a quick twist. Red anodized
LOCKSMITH TOOLS
ing various pin tumbler locks. Comes aluminum lets you find it easily in your toolbox.
with 3 tips and a tension wrench. ORDER # ITEM # PRICE
684-0600 LT370 $34.82

684-0485 PKXGUN-M $124.50
4 Piece Follower Set

Made from high grade machined
Clip-Zip Tool aluminum. Handsome red anodized
Makes door panel removal simple. Place color is easily found in your tool
the tool between the door clip and panel box. Plug followers fit 90% of the
Rim, Mortise, and Knob Cylinders on
and squeeze the tool for easy clip the market today. Contains:
removal. No more ripped panels LT371-395 (.395 dia.) LT371-495 (.495 dia.)
or broken clips. LT371-500 (.500 dia.) LT371-555 (.550 dia.)
684-0385 LT410 $73.60 684-0575 LT371 $69.00
Face Cap Pliers Cap Clincher Provides quick replacement of GM

and other auto lock caps. Simply place
Make the removal of face caps safe and
the cap in the tool, position the lock,
trouble-free. Works quickly and effortlessly & squeeze to clinch the cap into place.
with no training or practice. Won't scratch surface of caps.
684-0410 LT450 $67.00 684-0440 LT740 $62.80

Call, Toll Free
Killer Jig Kit "Butter Bits" Safe Drilling Bits

Pro-Lok's The Killer Jig is made from lightweight ma- Designed and manufactured in England with unique
chined aluminum with hardened bushings and a durable negative rake angle. Special design increases cutting
powder coated finish. The large comfortable knobs and ability while minimizing tip failure. Rapid penetra-
door thickness adjustment allows you to easily adjust the tion ability.
jig to the thickness of the door. The eight recessed rubber ORDER # ITEM # SIZE PRICE
pads help protect the door’s finish. The easy backset 684-0495 PRO SB02 3/16" x 6" $15.60
changing and easy to change hole sizes not only saves you
684-0500 PRO SB05 1/4" x 4" $18.78
valuable time, but our high quality cutters will save you
684-0505 PRO SB06 1/4" x 6" $18.5
money. Professional quality makes better installations.
684-0510 PRO SB11 5/16" x 5" $23.00
Includes:
684-0515 PRO SB12 5/16" x 8" $23.60
• The Killer Jig
684-0520 PRO SB15 3/8" x 5" $29.48
• 1" edge-bore bit
• Strike locator 684-0525 PRO SB16 3/8" x 8" $31.60
• Both 2-1/8" & 1-1/2" cross-bore 684-0530 PRO SB17 3/8” x 12” $39.00
spur bits 684-0535 PRO SB20 1/2” x 6” $36.98
• 4 different heavy duty latch and
faceplate mortise tools
• Unique deadbolt height gauge
• Quick change drill adapter
Key Decoders
Top quality stainless steel provides
• Set of 1-1/2” bushing plates
strength and durability for these indi-
• Set of 2-1/8” bushing plates
vidual key decoders.
• Custom molded carrying case
The stamped depth increments will
never wear off. Designed with Sure-
LOCKSMITH TOOLS
684-0030 INJIG-KJ $990.00 Stop steps, each increment reflects
factory specs and tolerances. Replaces
worn out original decoders.
Bushing Plates for Killer Jig ORDER # ITEM # PRICE
The hardened steel bushing plate used for
locks requiring a 2-1 /8" cross bore. 684-0605 KDIC for BEST/Falcon IC A2 $14.00
1 plate per package. 684-0610 KDSC for Schlage $14.50
684-0310 INJIG-126 2-1/8" $29.90

Stainless Steel Key
Decoders
Schlage CO-Series Installation Jig Decode cut depths on the most
popular keys. Use for rekeying and
IN510-PRO Schlage CO CYC Template
code cutting. Uses stepped depths
• Made from lightweight aluminum
for exact decoding.
• Preps door for the Schalge CO Series
hardware. ORDER # ITEM # PRICE
• Set up for both wood and hollow metal
684-0265 KD01 Schlage, Kwikset, Weister, Weslock $35.90
doors
684-0270 KD02 Medeco, Master American $39.66
• Features steel hardened bushings and an
anodized finish 684-0275 KD03 GM, Ford, Chrysler Ford 10 cut $35.90
684-0320 IN510-PRO $820.00
LOCKSMITH TOOLS
Fax Your Order
10 Piece Mini Blue Rytan Plug Spinners

Lock Pick Kit Unique Plug Spinner will turn plug
Picks with blades scaled down 20% rapidly past shear line without relocking. Won't overspin plug,
compared to traditional picks, great for as rotation is confined to 180˚ either left or right. Simply
opening locks with small keyways, & cock the shaft knob, insert tip into keyway, & push button.
for groovings that confine regular tools. ORDER # ITEM # PRICE
Key extractors & tension wrenches in- 723-0057 RY-57 $64.78

cluded. Durable case. (2-1/4 x 6-1/4") 723-0058 Replacement blades (5/pk) $26.78
723-0055 MRPK-10 $77.58

RY-5798 Compact Plug Spinner
Same original Push Button technology in the famous RY-57 Plug
Spinner. The RY-5798 packs more WALLOP than the RY57,
Individual Lock Picks and it costs a lot less!
Traditional, Ergonomic Stainless Steel Pick Blades
Miniature Picks 723-5798 RY-5798 $26.78

723-0040 MBPX-11 Full Rake $3.18

723-0050 MBPX-14 Diamond Hook $3.18
Full Size Picks

40-119 Schlage Pin Keying Kits
In Seal Tight Metal Box. For pin tumbler locks.
723-0065 RLPX-11 Std. Full Rake $3.18 Contains: Bottom pins (0-9), master pins
723-0070 RLPX-12 Std. Hook $3.18 (2-9), Top pins, springs, cap retainer pins,
723-0075 RLPX-14 Diamond Hook $3.18 retainer springs, cylinder caps, shim stock,
LOCKSMITH TOOLS
tweezer, follower, bar, cap remover tool.

723-0085 RLPX-16 Std. 1/2 Rake $3.18
740-0126 40-119 $549.91
Roto-Puller™
3 Tools in One! 3 steering Wheel Pullers in
one. 3 different sets of built in puller bolts Schlage Key Gauges
for three different thread sizes used on GM, ORDER # ITEM # PRICE
Dodge, Ford and AMC cars. Standard threaded
740-0125 40-104 $18.80
(Not Metric). Instructions included.
723-0023 RY-23 $176.00 Boring Bits

740-0118 40-175 1" $117.35

Cylinder Removal Tools 740-0119 40-176 2-1/8" $340.36
for Kwikset 740-0121 40-177 1-1/2" $267.97
Pops out cylinders from 400
series knobs in a jiffy. Self-align-
ing design insures expanding
tips come in direct contact with retainer clips every time.
723-0036 RY-36 $67.58

Call, Toll Free
Shim Picks
Tri-Flow Lubricant ORDER # ITEM # PRICE
Long Lasting Lubrication with extremely low 940-0011 WEI-1425 $2.40
viscosity and surface tension,TRI-FLOW’S
exceptional lubrication virtually eliminates
friction - friction coefficient 0.08. With TRI- 3-WAY Cylinder Cap Removal Tool
FLOW the need for reapplication is reduced
by up to 90%. ORDER # ITEM # PRICE
940-0191 WEI-1029 $7.44

Protects
TRI-FLOW Combines Teflon with complex
carrying agents, to form highly durable
film, and virtually eliminates wear on mov-
ing parts. Falex load test - max load 3700lbs, temperature
range -53 C - + 246 C.
Cleans
Dirt, dust, sand and other abrasive matter are dispersed Machine Made Letter & Figure Sets
by the bearing action of the Teflon particles. Surfaces are
cleaned and kept clean. Repels moisture. Letter Sets (27 Characters)
Penetrates ORDER # ITEM # SIZE PRICE
TRI-FLOW’S special non-acidic solvents break down car- 980-1332 YOU-3/32L 3/32" $94.24
bon deposits, hardened grease, sludge and grimy film and 980-1018 YOU-1/8L 1/8" $94.24
penetrates even into the most inaccessible areas.
Prevents Corrosion
Displaces moisture, preventing the formation of ice, rust Number Sets (9 Characters)
LOCKSMITH TOOLS
and other corrosives. TRI-FLOW dissolves the crystalline ORDER # ITEM # SIZE PRICE
structure caused by moisture, salt and alkalies. Acid-free, 980-0332 YOU-3/32F 3/32" $31.40
it releases seized parts.
980-0018 YOU-1/8F 1/8" $31.40
880-1200 TFBC20027 Pin Point - Carded $15.93
880-2009 TRI-20009 4oz Aerosol $11.96
880-1500 TRI-15000 6oz Aerosol $22.45
880-1700 TRI-17000 12oz Aerosol $26.05
880-1800 TRI-29200 18oz Trigger Spray $33.63
800-0016 TRI-26020 1 Gallon $165.04 HELPING YOU
GROW YOUR
BUSINESS

We're committed to your success!
LOCKSMITH TOOLS

39434ebd4735b5e3fbb10b1f246d836f85c4a0915b015326043aa5f948638124

Uploaded by

Copyright:

Available Formats

39434ebd4735b5e3fbb10b1f246d836f85c4a0915b015326043aa5f948638124

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

39434ebd4735b5e3fbb10b1f246d836f85c4a0915b015326043aa5f948638124

Uploaded by

Copyright:

Available Formats

ORDER ONLINE

Pick Guns.................................... 522, 544 BEST.......................................... 493–494

MFG. NO LONGER IN BUSINESS #30 SET Get-A-Grip Set

#27 Broken Key Pullers ORDER # ITEM # PRICE

A kit of three different pullers. Spiral, 005-0425 AMF 30 SET $27.60

ORDER # ITEM # PRICE

005-0440 AMF CO2 $27.50

TOP PINS BOTTOM PINS TOP PINS BOTTOM PINS

846-1010 1B 846-1020 11B 846-1000 0A 846-1206 1F 846-1200 0E

Core Caps SERVICE KITS

Ace Tumbler Service Kit

lock retainers, tumbler springs, 180-0500 CHI D9630 $185.90

200-0664 COR KK125 $156.98 PIN TUMBLER KEYING KITS

V70P-1 Pin Tumbler Kit

100 pcs. ea. 0, 1, 2, 3, 4, 5, 6, 7, 8

605-4155 NAL V70P-2 $56.23

26990 Do Not Duplicate Stamp

605-4160 NAL V71D-3 $42.72

LOCKSMITH TOOLS ORDER ONLINE

427-0008 KC-80 $20.00

Peg Board Hooks

550-0074 FH74 4" Single $0.24 227-0155 HS-060 $2.16

locks. 790-0800 DVS-800P $78.00

ORDER # ITEM # PRICE

200-0664 COR KK125 $156.98 Edroy Products

285-1410 FAL 1404 $572.40

ORDER # ITEM # PRICE

335-0002 GKL HA2 Green $148.50

GKL Snap-In Bridge FOR GKL HINGE SCREWS, SEE SECTION 3 -

335-0005 GKL B15 $11.00

LOCKSMITH TOOLS ORDER ONLINE

Lighter and more portable than the 360-0163 HPC-HGG $22.76

ORDER # ITEM # PRICE

CJ-34 “Carolina Roller” Multi-Tool CO-24 Big Jim™

245-0005 CJ-34 $18.00

ORDER # ITEM # PRICE

360-0057 HPC CO-10 $20.50 CO-61 Stretch Killer™

360-1261 HPC CO-61 $42.24

360-0058 HPC CO-11 $21.18

CO-68 Over Hook™

LOCKSMITH TOOLS ORDER ONLINE

CO-70 Super Killer™ CO-75 & CO-76 Thru Car

CO-71 Stretch Double "L"

360-1272 HPC CO-72 $32.06

360-1276 HPC CO-73 $21.04 360-0066 HPC CO-85 $164.76

CO-86 Fish Hook AKK-BC Button Clutch™ Killer Kit

360-0320 AKK-BC $86.98

CO-87 Button Clutch™

DODGE FORD GEO

360-1265 HPC CO-86 $84.72 360-0340 AKK-SF $79.98

Don’t See What You’re Looking For?

LOCKSMITH TOOLS ORDER ONLINE

AKK-GF Gold Finger Killer Kit AKK-55 Starter Killer Kit

ORDER # ITEM # PRICE

AKK-JPTC Jam-Packed Thru Car

AK-88 Classic Killer Kit AW-100 Universal Air Wedge®

360-2304 HPC AKK-88 $751.98 insertion and the sure-stop

360-2306 HPC AKK-99 $1,046.86

LOCKSMITH TOOLS ORDER ONLINE

PW-100 Power Wedge™ AST-4 Door Panel Pad Clip Remover