Scribd
Upload
1K views5 pages

Genexis OLT Configuration

Uploaded by

SANKET PARSEKAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views5 pages

Genexis OLT Configuration

Uploaded by

SANKET PARSEKAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Genexis OLT Configuration

Model Number:-

1. Configuring User ID and Password for Access:-

username netteam password sn0w

2. Configure SNMP:-

snmp-server community kamlis ro permit


snmp-server host 125.99.88.227 version 2c kamlis udp-port 162 notify-type bridge gbn
snmp-server host 125.99.88.245 version 2c genolt udp-port 162 notify-type bridge gbn
snmp-server enable traps bridge gbn gbnsavecfg interfaces rmon snmp

3. Set Clock and Time Zone:-

clock set 12:41:22 2018/04/25

GENEXIS-TEST-OLT (config)#clock timezone IST 5 30

4. Configuring NTP:-

ntp server 125.99.88.229 priority 1


ntp enable
ntp master 8

show ntp stat

5. Configure Access List:-

access-list extended 101


permit ip 202.88.130.128 0.0.0.31 any
permit ip 125.99.88.0 0.0.0.255 any
exit

6. Apply Access List on Line VTY:-

13.Enable Auto write

14.Syslog
7. Creating Vlans:-

vlan 900
name PPPoE

vlan 901
name MAC-TAL

vlan 30
name MGMT

Note: Vlans to be passed as per the requirements while configuration on the ONU(PPPoE/Mactal)

8. Create the Management Interface Vlan, Assign IP Address and Default Route :-

i. Create the Management Interface Vlan:-

interface vlan-interface 30

ii. Assign IP Address:-

ip address 125.99.55.205 255.255.255.240 ---------------------------- add as require


byname MGMT-Int

iii. Add default Route:-

ip route 0.0.0.0 0.0.0.0 125.99.55.201 ---------------------------- add as require

9. Applying Vlans on Uplink Interface:-

interface ethernet 1/1


switchport trunk allowed vlan 30,900-901
exit

10.Apply Auto-learning feature on PON Interface:- (find list)


ont-find interface gpon all

Note:Once above command is enabled,will be able to check unprovision ONU.


Like ZTE,logical port (onu id) will not be created automatically, need to create it manually
1 dba profile upstream bandwidth allocation for ONU one time config
2 vlan profile for services one time config
3 line profile gemport,tcont mapping,call dba profile one time config
4 rule profile call line profile and sync with ONU S/N onu related config

11.Configure dba profile

deploy profile dba


aim 1 name TEST
type 4 max 1024000
active
exit

15. Vlan Profile

deploy profile vlan


aim 1 name PPPoE
translate old-vlan 900 new-vlan 900
active
aim 2 name STATIC
translate old-vlan 901 new-vlan 901
active
aim 3 name fiber
translate old-vlan 910 new-vlan 910
translate old-vlan 911 new-vlan 911
active
exit

16. line profile

device type SN first three digits bridge/router


Atlas-1G-3090
n20-100 GNXS-01682166 bridge onu
Platinum 4410
c40-210 GNXS-019cef88 router onu

Profile for bridge onu


aim 1 name SFU-PPPoE
device type n20-100 ---------------------(add device type according to onu bridge/router)
tcont 1 profile dba 1
gemport 1 tcont 1 vlan-profile 1
mapping 1 vlan 900 gemport 1
flow 1 port eth 1 default vlan 900
active

aim 2 name SFU-STATIC


device type n20-100
tcont 1 profile dba 1
gemport 1 tcont 1 vlan-profile 2
mapping 1 vlan 901 gemport 1
flow 1 port eth 1 default vlan 901
active
Profile for router onu
aim 3 name HGU-PPPoE
device type c40-210
tcont 1 profile dba 1
gemport 1 tcont 1 vlan-profile 1
mapping 1 vlan 900 gemport 1
active

aim 4 name HGU-STATIC


device type c40-210
tcont 1 profile dba 1
gemport 1 tcont 1 vlan-profile 2
mapping 1 vlan 901 gemport 1
active

Rule config for Bridge ONU PPPOE

deploy profile rule


aim 0/6/1
permit sn string-hex GNXS-01681b7c line 1 default line 1
active

Rule config for Bridge ONU TAL

aim 0/6/3
permit sn string-hex GNXS-01682166 line 2 default line 2
active

Rule config for Router ONU PPPOE

aim 0/6/2
permit sn string-hex GNXS-019cf770 line 3 default line 3
active

Rule config for Router ONU TAL

aim 0/6/4
permit sn string-hex GNXS-019cef88 line 4 default line 4
active
exit

You might also like