DATA SHEET
NANOTECHNOLOGIC
ADDITIVE FOR
CONCRETE WITH
GRAPHENE OXIDE
[email protected]
DATA SHEET
NANOTECHNOLOGIC ADDITIVE FOR CONCRETE WITH GRAPHENE OXIDE
Description
State-of-the-art nanotechnologic additive for concrete reinforced with graphene
oxide, with a specialized formulation to improve multiple properties of concrete
and mortar.
Features
Increased Anticorrosive
impermeability protection
Higher mechanical Provides better
resistance flexibility
Thermal Speeds up
insulation setting time.
Antimicrobial
protection
*Results supported by certified laboratory tests.
Use
All types of concrete: Conventional concrete, polymeric concrete, reinforced
concrete, structural mortar, precast concrete, etc.
Yield
- 1 liter of additive yields 4 tons of cement.
- 5 liters of additive yield 20 tons of cement.
- 20 liters of additive yield 80 tons of cement.
Page 2 from 6
This document is the property of Energeia Fusion S.A. de C.V. Its partial
or total reproduction is prohibited without prior authorization.
[email protected]
DATA SHEET
NANOTECHNOLOGIC ADDITIVE FOR CONCRETE WITH GRAPHENE OXIDE
Components and properties
Components CAS. No. EC No. Weight %
Distilled water 7732-18-5 231-791-2 >95
Graphene oxide 7782-42-5 947-768-1 <5
Stabilizers - - <1
Properties
Physical state: Fluid liquid
Colour: Dark gray
Odor: Odorless
Relative density: 1.01
Freezing Point: 0 °C (32 °F)
Boiling point: Not available
Flash point: Not available
Explosion limits: Not available
Flammability: 0
Solubility: Soluble in water
pH: 6.5 - 7.5
Vapor pressure: Not available
*Compatible with conventional additives
Presentation
1L, 5L, and 20L
Page 3 from 6
This document is the property of Energeia Fusion S.A. de C.V. Its partial
or total reproduction is prohibited without prior authorization.
[email protected]
DATA SHEET
NANOTECHNOLOGIC ADDITIVE FOR CONCRETE WITH GRAPHENE OXIDE
Material handling
Step 1. Calculate the amount of Graphenergy Construction additive per kilogram of
cement, according to the dosage calculation section.
Step 2. Disperse the required volume of Graphenergy Construction in 100 to 1000 ml
of the water required for the concrete or mortar mixture.
Step 3. Prepare the concrete or mortar mixture as usual, according to your
specifications, considering water, aggregates, cement and other additives used in
the design of the concrete or mortar.
Step 4. Once the concrete or mortar mixture is prepared and hydrated, in the final
stage of mixing, add the pre-diluted additive and mix thoroughly for a minimum
of 10 minutes.
Dosage calculation
Quantity per-kg of cement 0.25 ml
Quantity per-bag of cement (50kg) 12.5 ml
Quantity per-ton of cement 250 ml
Recommendations
- Prior to use, read the product data sheet and safety data sheet.
- The dosage of the additive must be carried out when the concrete mixture
is fully prepared and perfectly homogenized and hydrated.
- Normally, manual agitation of the additive is enough for its dosage, but if it
has been stored for more than 4 months, it may be necessary to mix it
mechanically with a propeller disperser for a few minutes before use.
- The performance of Graphenergy Construction can vary depending on the
design of the concrete, the quality of the aggregates, the type of cement,
additives and the homogenization of the mix; the product does not act as a
superplasticizer or water reducer, but rather as a setting accelerator. It is
advisable for the user to carry out the proper tests with the additive to determine
its suitability before its final application.
- For more information, ask for technical support to Energeia Fusion S.A. de C.V.
Page 4 from 6
This document is the property of Energeia Fusion S.A. de C.V. Its partial
or total reproduction is prohibited without prior authorization.
[email protected]
DATA SHEET
NANOTECHNOLOGIC ADDITIVE FOR CONCRETE WITH GRAPHENE OXIDE
Warnings
- Do not ingest or inhale; avoid contact with skin and eyes.
- In case of ingestion, do not induce vomiting; rinse nose, mouth and throat and
get medical attention.
- In case of contact with the skin, wash with plenty of soap and water.
- In case of contact with eyes, rinse with plenty of water.
- If irritation or discomfort occurs, get medical attention.
- Keep out of the reach of children.
ATTENTION, HARMFUL IF SWALLOWED
Safety precautions
- Graphenergy Construction is classified as a non-hazardous, non-explosive,
non-toxic and non-flammable substance.
- Handle in accordance with conventional safety and hygiene practices at work.
- Use personal protective equipment.
USE GLOVES WEAR GLASSES
Storage
- Keep in its original container, hermetically closed, indoors, in a cool and dry
place, protected from sunlight.
- Store away from oxidizing agents, halogens, acids, flammable and
explosive substances.
- Storage class (TRGS 510): 12: Non-Combustible Liquids.
Page 5 from 6
This document is the property of Energeia Fusion S.A. de C.V. Its partial
or total reproduction is prohibited without prior authorization.
[email protected]
DATA SHEET
NANOTECHNOLOGIC ADDITIVE FOR CONCRETE WITH GRAPHENE OXIDE
Waste management and environmental impact
The generation of waste should be avoided or minimized wherever may be possible.
Avoid dispersion of material into the ground, waterways, drains and sewers.
- Spills: In case of spill, it does not present any danger, use safety material for its
collection. It should be mechanically collected and placed in a suitable container
for further treatment.
- Product: Observe state and local regulations on environmental protection. To
dispose of this product, contact an authorized professional service.
- Contaminated packaging: Eliminate as unused product through an authorized
professional service.
- Uncontaminated packaging: Can be treated as normal waste or recycled.
Expiration
Up to 12 months in its original sealed container, keep indoors in a dry place at
room temperature.
Legal note
The information contained in this data sheet is provided in good faith and is valid
only for the product to which reference is made.
The information is not intended to be exhaustive, and it is based on Energeia Fusion,
S.A. de C.V., current knowledge, and experience, as long as the product is properly
stored, handled and applied under normal conditions and in accordance with the
recommendations expressed here. Due to the variability of materials, working
conditions and purpose of use, the guarantee is limited solely to the quality of the
product supplied. It is advisable to carry out the pertinent tests with the product
to determine its suitability before its final application. In case of changes in
parameters of application or if it is planned to use for a different application, consult
Technical Service. Energeia Fusion, S.A. de C.V., is not responsible for any damage
that may be caused by misuse of the product.
Code I-ENER-8.3
Version 0
Revision 03-01-23
Page 6 from 6
This document is the property of Energeia Fusion S.A. de C.V. Its partial
or total reproduction is prohibited without prior authorization.
[email protected]
