Idec-FC3A-CP2K-datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 22

COLORONC.

book Page 1 Monday, August 16, 1999 1:21 PM

OpenNet Controller

Electrical Specifications
FC3A-CP2K, -CP2KM* High-speed counter sink output
FC3A-CP2S, -CP2SM* High-speed counter source output
Rated Voltage 24V DC (19-30V DC, including ripple)
Maximum Input Current 1.5A at 24V DC
Reverse Polarity Protection Prevents damage if incorrectly wired.
Operating Temperature 0 to +55°C
Storage Temperature -25 to +70°C
Relative Humidity 30 to 95% (non-condensing)
10 to 57 Hz, amplitude 0.075mm
Vibration Resistance 57 to 150 Hz 9.8 m/sec2
10 sweep cycles/axis (IEC 1131)

Shock Resistance 147 m/sec2, 11 ms


3 shocks each in 3 axes (IEC 1131)
Between power terminal and FG: 500V AC, 1 min
Dielectric Strength Between I/O terminal and FG: 1500V AC, 1 min
Ground Grounding resistance 100Ω (maximum)
Mounting Style 35mm DIN rail

Hardware Features
• Digital I/O
- 8, 16, and 32 point cards
- 224 inputs and outputs, 480 with expansion power supply
• Analog I/O
- up to 42 analog inputs or 14 analog outputs
- 0-5V, 0-10V, ±5V, ±10V, 4-20mA
• Built-In Communications Ports
FC3A-CP2K - 2 RS232 (programming port, ASCII, printer and modem ready)
FC3A-CP2S - 1 RS485 (programming port and data link)
• Build-in High-Speed Counter
- 1 channel, 10kHz, 16-bit resolution
• Memory
- 16K words (8K steps) user program capacity
- Flash miniature memory card slot (FC3A-CP2KM/SM* only)
• Realtime Calendar/Clock, Y2K compliant
• Password Protection
• PID Algorithm

ONC Capabilities
•Networking - Built-in X/Y Conversion
ONC capable of communicating with various standard networks: - Sub-Routine Call/Return for Modular Programming
- DeviceNet - Square Root
- INTERBUS - 16- and 32-bit Math, Add, Sub, Mult, Div
- LONWORKS - Data Conversion to/from Dec, Hex, BCD, ASCII
•Programming Software; WindLDR® 3.0 - Block Move
- Programs all IDEC PLCs
- Summation
- Windows-based (compatible with Windows 3.10, 3.11,
Win 95 or Win 98) - Averaging
•Programming Instructions - Day of Week Program Scheduling
- Transmit/Receive •Built-in Hayes "AT" command set for modem dialup/pager applications

*FC3A-CP2KM/SM will be available soon

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 2 Monday, August 16, 1999 1:21 PM

Powered by IDEC’s PS5R Series 50W Power Supply

PS5R Power Supply


Wattage & Current Ratings 50W, 2.1A
PS5R-D24

Rating UL 508 listed


Mounting DIN rail mountable
Standard ONC CPU
Available Instructions 37 basic, 65 advanced (PID, square root, subroutine calls, etc.)
User Program Capacity 16K words flash memory
Memory (Miniature Card) 2, 4 and 8MB; 5V type
Average Scan Time 1 ms or greater
Input 224 points (I0-I277)
Output 224 points (Q0-Q277)
Total I/O Points Using expansion power supply: 480 I/O points
General ONC Specifications

Internal Relay 2048 (M0-M2557)


Special Internal Relay 192 (M8000-M8237)
Shift Register 256 (R0-R255)
Timer 256 (T0-T255; 1-sec, 100-msec, 10-msec, 1-msec)
256 (C0-C255; adding, dual pulse reversible, up/down selection
Counter reversible)
Data Register 8000 (D0-D7999)
256 master (L1000 - L1317),
Link Register 168 slave (L100 - L127, L200 - L227, ......, L700 - L727)
Remote I/O 512 points
Real-Time Calendar/Clock Runtime Yes (Y2K complaint)
Program Protection Yes (password protected)
External Run/Stop Control Yes
Power Failure Protection Yes
Self-Diagnostics Yes
Auto Start Function Yes

The eighth slot must be expansion power supply module.


(Above photo is only an example of the range of
available modules.)
COLORONC.book Page 3 Monday, August 16, 1999 1:21 PM

OpenNet Controller, Networking & Applications

0
1

PC Communication
2
3
4
5
6
7
8
9
10
11
12

The ONC is programmed by our intuitive WindLDR™


13
14
15
16
17 RS232C Port 1 or Port 2
3.0 software Computer Link Cable 4C
FC2A-KC4C
-use RS232 or RS485 ports 3m (9.84 ft.) long
-upload, download and monitor programs
D-sub 9-pin Female Connector

For RS485 programming, use FC2A-KC6C cable.

Master Station Slave Station 1 Slave Station 2 Slave Station 31

Data Link - Superiority in Networking 0


1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
6 6 6

HG Series
7 7 7

Connect up to 32 ONC, Micro3, FA Series PLCs or


8 8 8
9 9 9
10 10 10
11 11 11

Operator
12 12 12
13 13 13
14 14 14

the HG Series operator interface on the data


15 15 15
16 16 16

Interface
17 17 17

link network.

Communication
Selector
DIP Switch

0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 1st Unit
RS232C/RS485 Converter 17

FC2A-MD1

Computer Link - Power & Versatility


D-sub 9-pin
Connect 32 ONCs on a 1:N computer link system. Female Connector 0
1

RS232C Cable 2
3
4
5
6

Upload, download, monitor, and update data. HD9Z-C52 7


8
9
10
11

1.5m (4.92 ft.) long 12


13
14
15
16
17 2nd Unit

Twist-pair Shielded Cable

0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
32nd Unit

RS485

POWER
RUN
ERROR
HSC OUT
1 2 3

Communication Flexibility Modem


COM A

O
N

DIP
B

Switch
Easy connections to any R232C equipment
Z HSC
OUT A B G +24V 0V
RS485

through the user defined RS232C port 1 or 2.


Built-in Hayes “AT” command set for direct
modem dialup and pager applications.
Printer

Barcode Reader
COLORONC.book Page 4 Monday, August 16, 1999 1:21 PM

Network Communication System

The ONC offers versatility and power with the unique capability
to inferface with standard networks such as INTERBUS,
DeviceNet and LONWORKS.

Add 8 or 16 I/O points


to the remote I/O network with a
simple connection: SX5S commu-
nication terminals offer a simple
and low cost method of system
expansion.

OpenNet Interface Modules

Expansion Connector Expansion Connector Expansion Connector

(1) Module ID (1) Module ID (1) Module ID


(5) Status LED (4) Status LED (5) Status LED
(2) FG Terminal SERVIOSE
REQUESI
(2) FG Terminal

(3) Connector 1 (2) DIP Switch NETWORK

(3) Service Request

(4) Connector 2 (3) Connector (4) Connector

INTERBUS DeviceNet LONWORKS

8/99
COLORONC.book Page 5 Monday, August 16, 1999 1:21 PM

Analog Input and Output Modules

Key Features
• One card handles 5 different signal types,
[±5V, ±10V, 0-5V, 0-10V, or 4-20mA],
switch selectable
• Input module has 6 inputs per card, 7 cards per CPU,
42 analog input points maximum
• Output module has 2 outputs per card, 7 cards per CPU,
14 analog output points maximum
• 12-bit resolution, 0-4000 counts, count range divides evenly
• Fast input conversion, 3ms + 1 scan time
• I/O error ±0.6% full scale @25°C
• Convenient input termination, Phoenix Contact type connector

General Specifications

Analog Type Input Output


Point Per Card 6 Points 2 Points
Part Number FC3A-AD1261 FC3A-DA1221
Connector Type Phoenix Contact Phoenix Contact
0-10V DC, ±10V DC, 0-5V DC, 0-10V DC, ±10V DC, 0-5V DC,
Input Signal ±5V DC, 4-20mA ±5V DC, 4-20mA
Resolution 12 bits 12 bits
Range 0-4000 counts 0-4000 counts
Input Error ±0.6% of full scale @ 25°C NA
Output Error NA ±0.6% of full scale @ 25°C
Analog Output Module Conversion Time 3ms per point NA
FC3A-DA1221 Settling Time NA 3ms
Voltage: 1 MΩ minimum
Input Impedance NA
Current: 250Ω
Output Load Voltage=2 kΩ minimum
NA (Current=250Ω, 300Ω max.)
Impedance
Internal Current 120mA@24V DC 120mA@24V DC
Draw

Type of Protection
Analog Input Module Analog Output Module
+V
+V

Voltage Output
Voltage Input +
Current Input
250Ω –
COM Current Output
Differential
Amplif ier
COM

–V
–V

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 6 Monday, August 16, 1999 1:21 PM

FC3A-AD1261 Analog Input Module Terminal Arrangement


6-Channel - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Channel Name
1 +V (voltage)
2 Channel 0 +I (current)
A/D
3 COM (-V, -I)
PCW
4 +V (voltage)
5 Channel 1 +I (current)
6 COM (-V, -I)
7 +V (voltage)
8 Channel 2 +I (current)
9 COM (-V, -I)
10 +V (voltage)
11 Channel 3 +I (current)
12 COM (-V, -I)
13 +V (voltage)
14 Channel 4 +I (current)
15 COM (-V, -I)
16 +V (voltage)
17 Channel 5 +I (current)
18 COM (-V, -I)
19 — NC
20 — NC

FC3A-DA1221 Analog Output Module Terminal Arrangement


2-Channel - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal Rotary Switch
Channel Name
No. Position
1 Voltage Output (0 to 10V)
0
2 COM (GND)
D/A

3 Voltage Output (±10V)


1
PCW 4 COM (GND)
5 Voltage Output (0 to 5V)
Channel 0 2
6 COM (GND)
7 Voltage Output (±5V)
3
8 COM (GND)
9 Current Output (4 to 20mA)
4
10 COM (GND)
11 Voltage Output (0 to 10V)
0
12 COM (GND)
13 Voltage Output (±10V)
1
14 COM (GND)
15 Voltage Output (0 to 5V)
Channel 1 2
16 COM (GND)
17 Voltage Output (±5V)
3
18 COM (GND)
19 Current Output (4 to 20mA)
4
20 COM (GND)

8/99
COLORONC.book Page 7 Monday, August 16, 1999 1:21 PM

16-Point DC Input Modules

Key Features
• One card handles sink (NPN) or source (PNP)
type input signals
• 16 points per card, 7 cards local, 8 cards expansion,
15 cards max. per CPU
• 19-30V DC input voltage range
• Software selectable input filtering, 0-32 msec
• High-speed catch inputs, first 8 points user definable,
pulse detection within 20-120µsec range
• Termination connector
-FC3A-N16B1 - removable Phoenix Contact type
-FC3A-N16B3 - removable Nylon type

General Specifications

Input Type DC Sink/Source


Part Number FC3A-N16B1 FC3A-N16B3
Connector Type Phoenix Contact Nylon
Input Voltage Range 19-30V DC 19-30V DC
Rated Input Voltage 24V DC 24V DC
Current Per Point 7mA 7mA
Internal Current - all inputs ON 40mA 40mA
Input Impedance 3.4kΩ 3.4kΩ
On/Off Voltage 15/5V DC 15/5V DC
On/Off Time 20/120µs 20/120µs
DC Input Module
FC3A-N16B1
FC3A-N16B3

Input Operating Range Input Internal Circuit


The input operating range of the Type 1 (EN61131)
input module is shown below:
Inter nal Cir cuit

30 COM
Input Voltage (V DC)

24 ON Ar ea

Input
15
Transition
Ar ea
5 OFF Ar ea
0
1.5 4.4 7 8.8
Input Cur rent (mA)

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 8 Monday, August 16, 1999 1:21 PM

FC3A-N16B1 Input Module Terminal Arrangement


16-Point DC - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name
1 COM
2 COM
DC
IN
3 I0
0 4 I1
1
2
3
5 I2
4
5
6
6 I3
7
10
11
7 I4
12
13 8 I5
14
15
16 9 I6
17

10 I7
11 COM
12 COM
13 I10
14 I11
15 I12
16 I13
17 I14
18 I15
19 I16
20 I17

FC3A-N16B3 Input Module Terminal Arrangement


16-Point DC - Nylon Connector Type
Applicable Connectors: VHR-10N (J.S.T. Mfg.)
SVH-21T-P1.1 (J.S.T. Mfg.) Terminal No. CN1
1 COM
2 COM
CN1 DC
IN 3 I0
4 I1
0
1
2 5 I2
3
4
5 6 I3
6
7
10 7 I4
11
12
13
8 I5
14
15
16
9 I6
17
CN2 10 I7
Terminal No. CN2
1 COM
2 COM
3 I10
4 I11
5 I12
6 I13
7 I14
8 I15
9 I16
10 I17

8/99
COLORONC.book Page 9 Monday, August 16, 1999 1:21 PM

32-Point DC Input Modules

Key Features
• One card handles sink (NPN) or source (PNP) type
input signals
• 32 points per card, 7 cards local, 8 cards expansion,
15 cards max. per CPU
• 20-28V DC input voltage range
• Software selectable input filtering, 0-32 msec
• High-speed catch inputs, first 8 points user definable,
pulse detection within 20-120µsec range
• Termination connector
-FC3A-N32B4 - removable Nylon type
-FC3A-N32B5 - removable Fujitsu type

General Specifications

Input Type DC Sink/Source


Part Number FC3A-N32B4 FC3A-N32B5
Connector Type Nylon Fujitsu
Input Voltage Range 20-28V DC 20-28V DC
Rated Input Voltage 24V DC 24V DC
Current Per Point 5mA 5mA
Internal Current 50mA 50mA
-all inputs ON
Input Impedance 4.7kΩ 4.7kΩ
On/Off Voltage 15/5V DC 15/5V DC
DC Input Module On/Off Time 20/120µs 20/120µs
FC3A-N32B4
FC3A-N32B5

Input Operating Range Input Internal Circuit


The input operating range of the Type 1
(EN61131) input module is shown below:

27.6
Inter nal Cir cuit

24 COM
Input Voltage (V DC)

ON Ar ea

15
Transition
Ar ea Input
5 OFF Ar ea
0
1 4.4 5.4
4.9
Input Cur rent (mA)

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 10 Monday, August 16, 1999 1:21 PM

FC3A-N32B4 Input Module Terminal Arrangement


32-Point DC - Nylon Connector Type
Applicable Connectors: H18-SHF-AA (J.S.T. Mfg.) Terminal No. CN1 CN2
SHF-001T-0.8BS (J.S.T. Mfg.) 18 I0 I20

CN1
17 I1 I21
DC
IN
16 I2 I22
15 I3 I23
0
1
2
14 I4 I24
3
4 13 I5 I25
5
6
7 12 I6 I26
10
11
12 11 I7 I27
13
14
15
10 I10 I30
16
CN2 17
20
9 I11 I31
21
22 8 I12 I32
23
24
25 7 I13 I33
26
27
30 6 I14 I34
31
32
33 5 I15 I35
34
35
36
4 I16 I36
37
3 I17 I37
2 COM COM
1 COM COM

FC3A-N32B5 Input Module Terminal Arrangement


32-Point DC - Fujitsu Connector Type
Applicable Connector: FCN-367J040-AU (Fujitsu) Terminal No. Name Terminal No. Name
B20 I0 A20 I20

DC
B19 I1 A19 I21
IN
B18 I2 A18 I22
0 B17 I3 A17 I23
1
2
3 B16 I4 A16 I24
4
5
6 B15 I5 A15 I25
7
10
11
B14 I6 A14 I26
12
13
14
B13 I7 A13 I27
15
16
17
B12 I10 A12 I30
20
21 B11 I11 A11 I31
22
23
24 B10 I12 A10 I32
25
26
27 B9 I13 A9 I33
30
31
32
B8 I14 A8 I34
33
34
35
B7 I15 A7 I35
36
37 B6 I16 A6 I36
B5 I17 A5 I37
B4 NC A4 NC
B3 NC A3 NC
B2 COM A2 NC
B1 COM A1 NC

8/99
COLORONC.book Page 11 Monday, August 16, 1999 1:21 PM

8-Point AC Input Module

Key Features
• 8 points per card, 7 cards local, 8 cards expansion,
15 cards max. per CPU
• 100-120V AC rated input voltage
• 85-132V AC input voltage range
• On/off detection set at 20ms
• Convenient termination connector, removable Phoenix
Contact type

General Specifications

Input Type AC
Part Number FC3A-N08A11
Connector Type Phoenix Contact
Input Voltage Range 85-132V AC
Rated Input Voltage 100-120V AC
Current Per Point 8mA
Internal Current - all inputs ON 30mA
Input Impedance 12 kΩ (60Hz)
On/Off Voltage 79/20V AC
On/Off Time 20ms
AC Input Module
FC3A-N08A11

Input Operating Range Input Internal Circuit


The input operating range of the Type 1
(EN61131) input module is shown below:
Inter nal Cir cuit

COM

132
Input Voltage (V AC)

ON Ar ea
100 Input

79

Transition
Ar ea

20 OFF Ar ea
0
1.6 6.5 8.3 11
Input Cur rent (mA)

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 12 Monday, August 16, 1999 1:21 PM

FC3A-N08A11 Input Module Terminal Arrangement


8-Point AC - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name
1 COM0
2 I0
AC
IN
3 COM1
0 4 I1
1
2
3
5 COM2
4
5
6
6 I2
7
7 COM3
8 I3
9 COM4
10 I4
11 COM5
12 I5
13 COM6
14 I6
15 COM7
16 I7
17 NC
18 NC
19 NC
20 NC

8/99
COLORONC.book Page 13 Monday, August 16, 1999 1:21 PM

16-Point Relay Output Modules

Key Features
• 16 points per card, 4 points per common,
15 cards max. per CPU
• Outputs rated 240V AC/2A or 24V DC/2A
• Turn On/Off delay 6-10ms
• 20,000,000 operations per relay minimum
• Termination connector
-FC3A-R161 - removable Phoenix Contact type
-FC3A-R162 - removable Nylon type

General Specifications

Output Type Relay Output


Part Number FC3A-R161 FC3A-R162
Connector Type Phoenix Contact Nylon
Rated Output Voltage 240V AC/24V DC 240V AC/24V DC
Rated Current Per Point 2A 2A
Internal Current 170mA 170mA
- all inputs ON
On/Off Time 6/10ms 6/10ms

Relay Output Module


FC3A-R161
FC3A-R162

Output Delay

Command

Output Status

OFF delay: 10 msec maximum


Chatter: 6 msec maximum
ON delay: 6 msec maximum

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 14 Monday, August 16, 1999 1:21 PM

FC3A-R161 Output Module Terminal Arrangement


16-Point Relay - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name
1 COM0

Ry
2 Q0
OUT
3 Q1
0 4 Q2
1
2
3 5 Q3
4
5
6 6 COM1
7
10
11
7 Q4
12
13
14
8 Q5
15
16 9 Q6
17

10 Q7
11 COM2
12 Q10
13 Q11
14 Q12
15 Q13
16 COM3
17 Q14
18 Q15
19 Q16
20 Q17

FC3A-R162 Output Module Terminal Arrangement


16-Point Relay - Nylon Connector Type
Applicable Connectors: VHR-5N (J.S.T. Mfg.) Terminal No. CN1 Terminal No. CN3
SVH-21T-P1.1 (J.S.T. Mfg.) 1 COM0 1 COM2
2 Q0 2 Q10
CN1
Ry 3 Q1 3 Q11
OUT

4 Q2 4 Q12
0
1 5 Q3 5 Q13
2
3
4
CN2 5
6
7
10
11
12
13
14
Terminal No. CN2 Terminal No. CN1
15

CN3
16
17
1 COM1 1 COM3
2 Q4 2 Q14
3 Q5 3 Q15
4 Q6 4 Q16
CN4 5 Q7 5 Q17

8/99
COLORONC.book Page 15 Monday, August 16, 1999 1:21 PM

16-Point DC Sink Output Modules

Key Features
• 16 transistor sink outputs per card,
15 cards max. per CPU
• Outputs rated 19-30V DC/0.5A
• Turn On/Off delay 500µ sec max.
• Opto-isolated outputs
• Termination connector
-FC3A-T16K1 - removable Phoenix Contact type
-FC3A-T16K3 - removable Nylon type

General Specifications

Output Type DC Sink


Part Number FC3A-T16K1 FC3A-T16K3
Connector Type Phoenix Contact Nylon
Rated Output Voltage 19-30V DC 19-30V DC
Rated Current Per Point 500mA@ 24V DC 500mA@ 24V DC
Internal Current 60mA 60mA
- all inputs ON
On/Off Time 500/500µs 500/500µs

DC Sink Output Module


FC3A-T16K1

Output Delay Output Internal Circuit

+V
Command
Inter nal Cir cuit

Output Status
Output

OFF delay 500 µsec maximum


ON delay 500 µsec maximum
COM (–)

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 16 Monday, August 16, 1999 1:21 PM

FC3A-T16K1 Sink Output Module Terminal Arrangement


16-Point DC - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name
1 Q0
2 Q1
Tr
OUT
3 Q2
4 Q3
0
1 5 Q4
2
3
4 6 Q5
5
6
7 7 Q6
10
11
12
8 Q7
13
14
15
9 COM(-)
16
17 10 +V
11 Q10
12 Q11
13 Q12
14 Q13
15 Q14
16 Q15
17 Q16
18 Q17
19 COM(-)
20 +V

FC3A-T16K3 Sink Output Module Terminal Arrangement


16-Point DC - Nylon Connector Type
Applicable Connectors: VHR-10N (J.S.T. Mfg.)
SVH-21T-P1.1 (J.S.T. Mfg.) Terminal No. CN1
1 Q0
2 Q1
CN1 Tr
OUT 3 Q2
4 Q3
0
1
2 5 Q4
3
4
5 6 Q5
6
7
10 7 Q6
11
12
13
8 Q7
14
15
16
9 COM(-)
17
CN2 10 +V
Terminal No. CN2
1 Q10
2 Q11
3 Q12
4 Q13
5 Q14
6 Q15
7 Q16
8 Q17
9 COM(-)
10 +V

8/99
COLORONC.book Page 17 Monday, August 16, 1999 1:21 PM

16-Point DC Protect Source Output Module

Key Features
• 16 transistor protect source outputs per card,
15 cards max. per CPU
• Outputs rated 19-30V DC/0.5A
• Turn On/Off delay 500µ sec max.
• Opto-isolated outputs
• Termination connector, removable Phoenix Contact type

General Specifications

Output Type DC Source


Part Number FC3A-T16P1
Connector Type Phoenix Contact
Rated Output Voltage 19-30V DC
Rated Current Per Point 500mA @ 24V DC
Internal Current - all inputs ON 70mA
On/Off Time 500µs/500µs

Protect Source Output Module


FC3A-T16P1

Output Delay Output Internal Circuit

Command COM (+)


Output Pr otect Device
Inter nal Cir cuit

Output Status Output

OFF delay 500 µsec maximum

ON delay 500 µsec maximum


Overload
Signal
–V

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 18 Monday, August 16, 1999 1:21 PM

FC3A-T16P1 Protect Source Output Module Terminal Arrangement


16-Point DC - Screw Terminal Type
Applicable Connector: SMSTB2.5/20-ST-5.08 (Phoenix Contact) Terminal No. Name
1 Q0
2 Q1
Tr
OUT
3 Q2
4 Q3
0
1 5 Q4
2
3
4 6 Q5
5
6
7 7 Q6
10
11
12
8 Q7
13
14
15
9 COM(+)
16
17 10 -V
11 Q10
12 Q11
13 Q12
14 Q13
15 Q14
16 Q15
17 Q16
18 Q17
19 COM(+)
20 -V

8/99
COLORONC.book Page 19 Monday, August 16, 1999 1:21 PM

32-Point DC Sink Output Modules

Key Features
• 32 transistor sink outputs per card,
15 cards max. per CPU
• Outputs rated 20.4-27.6V DC/0.1A
• Turn On/Off delay 500µsec max.
• Opto-isolated outputs
• Termination connector
-FC3A-T32K4 - removable Nylon type
-FC3A-T32K5 - removable Fujitsu type

General Specifications

Output Type DC Sink


Part Number FC3A-T32K4 FC3A-T32K5
Connector Type Nylon Fujitsu
Rated Output Voltage 20.4-27.6V DC 20.4-27.6V DC
Rated Current Per Point 100mA@24V DC 100mA@24V DC
Internal Current 90mA 90mA
- all inputs ON
On/Off Time 500/500µs 500/500µs

DC Sink Output Module


FC3A-T32K4

Output Delay Output Internal Circuit

Command +V
Inter nal Cir cuit

Output Status
Output

OFF delay 500 µsec maximum


ON delay 500 µsec maximum
COM (–)

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 20 Monday, August 16, 1999 1:21 PM

FC3A-T32K4 Sink Output Module Terminal Arrangement


32-Point DC - Nylon Connector Type
Applicable Connectors: H18-SHF-AA (J.S.T. Mfg.) Terminal No. CN1 CN2
SHF-001T-0.8BS (J.S.T. Mfg.) 18 Q0 Q20

CN1
17 Q1 Q21
Tr
OUT
16 Q2 Q22
15 Q3 Q23
0
1
2
14 Q4 Q24
3
4 13 Q5 Q25
5
6
7 12 Q6 Q26
10
11
12 11 Q7 Q27
13
14
15
10 Q10 Q30
16
CN2 17
20
9 Q11 Q31
21
22 8 Q12 Q32
23
24
25 7 Q13 Q33
26
27
30 6 Q14 Q34
31
32
33 5 Q15 Q35
34
35
36
4 Q16 Q36
37
3 Q17 Q37
2 COM(-) COM(-)
1 +V +V

FC3A-T32K5 Sink Output Module Terminal Arrangement


32-Point DC - Fujitsu Connector Type
Applicable Connector: FCN-367J040-AU (Fujitsu) Terminal No. Name Terminal No. Name
B20 Q0 A20 Q20

Tr
B19 Q1 A19 Q21
OUT
B18 Q2 A18 Q22
0 B17 Q3 A17 Q23
1
2
3 B16 Q4 A16 Q24
4
5
6 B15 Q5 A15 Q25
7
10
11 B14 Q6 A14 Q26
12
13
14
B13 Q7 A13 Q27
15
16
17
B12 Q10 A12 Q30
20
21 B11 Q11 A11 Q31
22
23
24 B10 Q12 A10 Q32
25
26
27 B9 Q13 A9 Q33
30
31
32
B8 Q14 A8 Q34
33
34
35
B7 Q15 A7 Q35
36
37 B6 Q16 A6 Q36
B5 Q17 A5 Q37
B4 NC A4 NC
B3 NC A3 NC
B2 +V A2 COM(-)
B1 +V A1 COM(-)

8/99
COLORONC.book Page 21 Monday, August 16, 1999 1:21 PM

Expansion Power Supply Module

Key Features

• Expands the ONC from 224 up to 480 I/O points


• Increases I/O and functional modules by 8
• Comes with a cable connector and contacts
• Simple, easy and convenient mounting
• Install in the 8 slot only

General Specifications

Specifications
Part Number FC3A-EA1
Connector Type Nylon - 5 pin
Input Voltage Range 19 - 30V DC (including ripple)
Rated Input Voltage 24V DC
Internal Current 30mA
10 msec (24V DC),
Momentary Power Interruption Level PS-2 (EN61131)

Expansion Module
FC3A-EA1

Power Supply Wiring

Connector
1: NC
2: NC
Fuse
Power Voltage: 24V DC – + 3: 24V DC (red)
Inrush Current: 50A
4: 0V (blue)
(same power source for CPU)
5: FG (green)

Ground

For more information call IDEC Corporation (800) 262-IDEC 1175 Elko Drive, Sunnyvale CA 94089
Western Canada: (888) 578-9988 www.idec.com Eastern Canada: (888) 317-IDEC
COLORONC.book Page 22 Monday, August 16, 1999 1:21 PM

FC3A-EA1 Expansion Power Supply Module Mounting Position


Mount the expansion power supply module in the eighth slot.

7 modules (I/O and functional) 8 modules (I/O and functional)


CPU Module Expansion Power Supply Module

A maximum of 7 functional modules can be mounted in any of 15 slots

Mount the expansion power supply module only in the eighth slot, otherwise correct
allocation of I/O and link register numbers may not occur.

8/99

You might also like