UP STANDARD DETAIL REFERENCE DRAWINGS

N Remark: Shop Weld DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS
CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING
AE-036175
AD-036627
AWAY AWAY
INSULATION DETAILS FOR HOT PIPING AA-036911

SHOP MATERIALS INSULATION DETAILS FOR COLD PIPING AA-036913

Filed Weld INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630

TOWARD TOWARD PT N.B.

NOTES
NO DESCRIPTION (INS) STOCK CODE QTY
1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO
DOWN
PIPE FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.

2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).

1 PIPE , CS API 5L-X60N-PSL2 , SMLS , BE , 4 PPPCRPSMBE2572A 44.9 M 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.

7.14mm (0.281") WT , B36.10M , NACE

4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.
(B) BOLT HOLES ON FLANGES STRADDLE C . (C) WELDING ELBOWS ARE LONG RADIUS.

MR0175/ISO 15156 5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.

6. GASKET ALLOWANCE

7. PIPING MATERIAL IS
FITTINGS
2 TEE , CS A860-WPHY60 , SMLS , BE , 4X4 PTECODSMBE25732 2 PIPE SIZE SCHEDULE SPECIFICATION

7.14mm (0.281") WT , SP-75 , NACE REF MTO REF MTO REF MTO

MR0175/ISO 15156
3 SOCKOLET , CS A694-F60 , CL6000 , SW , 4X1 PLSCO7K6000S223 3
HDR/BRN , SP-97 , NACE MR0175/ISO
15156

FLANGES 8. WELDING STRESS RELIEF - YES NO

RADIOGRAPHY % 100% X-RAY SPOT X-RAY 01-SAMSS-10 X SHOP FIELD

4 WN FLG , ITCS A707-L3 CL.3 , CL900 , RJ 4 PFWCOW90RJ2572A 1 9. TESTING SHOP HYDROSTATIC TEST - YES NO

, 7.14mm (0.281") WT , B16.5 , NACE THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS
FLANGED.

MR0175/ISO 15156
10
10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION
SAES-L-105 CLASS 9CS2P06_01
. ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.

9 FIELD MATERIALS
11. INSULATION SHOWN ON DRAWING
N/A
12. REFER TO HYDROSTATIC TEST DIAGRAM.

7
13. FOR SMALL BORE LINES (UPTO 1-1/2" ) DIMENSIONS, ROUTING & SUPPORTING SHALL BE FIELD ADJUSTED.

FOR CONT. SEE 14. TIE-IN POINTS CO-ORDINATES TO BE VERIFIED BY CONTRACTOR IN FIELD.

6
PT N.B. 15. PAINTING / COATING SHALL BE AS PER TB-223080 FOR HARADH AND TB-843596 FOR HAWAIYAH.

T637565001 SHT 001

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
16. WELDS SHALL BE RADIOGRAPHED AS PER SAES-W-011.
NO DESCRIPTION (INS) STOCK CODE QTY
SLOPE 1:800 E 305765997
0F1
17.LINE NUMBERS AND TAG NUMBERS UPDATED IN THIS REVISION.

FOR CONT. SEE GASKETS

N 2676738973
HOLDS:

8 BD-0038 87
1. CERTIFIED VENDOR DATA FOR VALVE / IN LINE INSTRUMENTS / EQUIPMENT.
3 EL +100756
E 305763900 4X1"N.B. 5 GASKET , SOFT IRON , RJ, OCT , CL900 , 4 PGGR11C0090BLN5 1 SPOOLS TO BE FABRICATED BY VENDOR
N 2676738973 4"N.B. B16.5 , B16.20 TYPE R , NACE NO.
PIECES
MARK NO. SIZE
WEIGHT
LBS
NO.
PIECES
MARK NO. SIZE
WEIGHT
LBS

EL +100846 FW 3 MR0175/ISO 15156

T637564001
5 S8
91
2
4X1"N.B.
BOLTS
FR05-B-510-250-250-0-C-1 00
FOR CONT. SEE
E 1:8 FOR CONT. SEE 6 STUD BOLT (CONT) , CR-MO A193-B7M , W/ 2 1.1/8 PB1BLDSAD000001 8
FW
BD-0037 SLOPE 1:800 OP BD-0036 SF HVY HEX NUTS , A194-2HM , DIA
87 SL
E 305762442 41 E 305765541 (IMP) X LEN (IMP) - 190.5 mm Length
16
FOR CONT. SEE
N 2676738973
EL +100848
4 N 2676738973
SHT 003 EL +100844 VALVES / IN-LINE ITEMS
FW
E 305761207 SLOPE 1:795 T637566001
9 7 BLIND FLG , CS A105N , CL900 , RJ , 4 PFBC1B90RJ0002A 1
5 362
N 2676738868 14
S1
87 B16.5 , NACE MR0175/ISO 15156
SPOOLS TO BE FABRICATED BY SAUDI ARAMCO

3
EL +100762 4"N.B. S9 NO. NO.

S9 1 SH04-4-300-100-CS-400 PIPE SUPPORTS PIECES

MARK NO. SIZE
PIECES
MARK NO. SIZE

35 3
SH04-4-300-100-CS-400 12 8 'T' POST 4 FR05-B-510-250-250-0-C-1 1
4X1"N.B.
2 :8 00 S2
2
2 9 CS WELDED SHOE FOR SLOPING PIPE 4 SH04-4-300-100-CS-400 2
4X4"N.B. E1
OP 4X4"N.B.
1 SL
1 25
27 1667 105 11 10 'T' POST 4 FR05-B-520-250-250-0-C-1 1

7 S10
12 FR05-B-520-250-250-0-C-1
FOR CONT. SEE
7
BD-0035 637558-002-SPL-02 REFERENCE DRAWINGS

22 E 305758680 DRAWING CONTROL SHEET FOR J.O. 10-02029-0003 TD-896993

105 F01 N 2676738868 PIPING PLAN TA-637285
EL +100765 P&ID TA-527435
FLG4 GAS5 BLT6
T637563001 LINE DESIGNATION TABLE TA-527394
0F1 HYDROSTATIC TEST DIAGRAM TA-637040
PROJECT PIPING MATERIAL SPECIFICATION TE-727826
PIPE SUPPORT STANDARD TE-728359

637558-002-SPL-01
REVISION VALIDATION

THIS REVISION NO. 0F1 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

10-02029-0003-001

DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

AAJ VKP
12/27/2018 12/27/2018
REV.NO. DATE REVISION DESCRIPTION

0F1 12/27/2018 RE-ISSUED FOR CONSTRUCTION

JOB ORDER/EWO NO.

THIS REVISION IS NOT TO BE USED FOR
10-02029-0003 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

ISO 4"-BD-0045-9CS2P06_01
DRAWING TYPE

ISO
HRDH KHUFF REMOTE HEADER-K13
CHEMICAL DESIGN OPERATING TEST PRESS. TEST RADIOGRAPHY % INSULATION TRACING PAINTING STRESS LINE ID
CLEANING TEMP. PRESS. TEMP. PRESS. (PSIG) MEDIUM SHOP FIELD THK. TYPE SYS NO. HARADH GAS GATHERING MANIFOLD
(PSIG) (INCH.)
(DEG. F) (DEG. F) (PSIG) HARADH SAUDI ARABIA
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

NO 230 2000 110 50 NOTE-12 WATER NOTE 16 NOTE 16 N/A N/A NO NOTE 15 - BD-0045
H91 L TB-637558 002 0F1
Saudi Aramco 2825 ENG. (05/05)

RESTRICTED SMART CADD-03