CAMPUS® Datasheet

Elastollan® 1195 A - (TPU-ARET)

BASF Polyurethanes GmbH

Product Texts
DESCRIPTION
Elastollan 1195 A is a polyether based TPU

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at
low temperature, resistance to microbiological attack,
good wear performance, high tensile strength, good damping behavior

TYPICAL APPLICATIONS
hoses, ear tags, cable sheathing, roller tyres for conveyor systems
and shopping trolleys,

OTHER HINTS
predrying: 2-3h at 90-110°C
(air circulating oven or dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance
Mechanical properties Value Unit Test Standard
Tensile modulus 60 MPa ISO 527-1/-2
Stress at 50% strain 9 MPa ISO 527-1/-2
Stress at 100% elongation 10 MPa ISO 527-1/-2
Stress at 300% elongation 18 MPa ISO 527-1/-2
Stress at break TPE 55 MPa ISO 527-1/-2
Strain at break >50 % ISO 527-1/-2
Strain at break TPE >300 % ISO 527-1/-2
Charpy notched impact strength, +23°C N kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C N kJ/m² ISO 179/1eA
Tensile notched impact strength, +23°C 920 kJ/m² ISO 8256/1
Compression set at 23 °C, 24h 30 % ISO 815
Compression set at 70 °C, 24h 45 % ISO 815
Tear strength, parallel 100 kN/m ISO 34-1
Abrasion resistance 30 mm³ ISO 4649
Shore A hardness 96 - ISO 48-4
Shore D hardness 50 - ISO 48-4

Thermal properties Value Unit Test Standard

Glass transition temperature, 10°C/min -30 °C ISO 11357-1/-2
Burning behavior at thickness h HB class IEC 60695-11-10
Thickness tested (h) 1.0 mm IEC 60695-11-10
Oxygen index 24 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 100Hz 7 - IEC 62631-2-1
Relative permittivity, 1MHz 5 - IEC 62631-2-1
Dissipation factor, 100Hz 390 E-4 IEC 62631-2-1

Last update: 2023-04-05 Source: https://www.campusplastics.com Page: 1/5

Elastollan® 1195 A - (TPU-ARET)
BASF Polyurethanes GmbH

Dissipation factor, 1MHz 810 E-4 IEC 62631-2-1

Volume resistivity 1E10 Ohm*m IEC 62631-3-1
Surface resistivity >1E15 Ohm IEC 62631-3-2
Electric strength 37 kV/mm IEC 60243-1
Comparative tracking index 600 - IEC 60112

Other properties Value Unit Test Standard

Density 1150 kg/m³ ISO 1183

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 220 °C ISO 294
Injection molding, mold temperature 60 °C ISO 294

Diagrams

Viscosity-shear rate Shearstress-shear rate

Viscosity-shear rate Shearstress-shear rate
Elastollan® 1195 A Elastollan® 1195 A

1E4 200 °C 1E6 200 °C

210 °C 210 °C
220 °C 220 °C
Shearstress in Pa
Viscosity in Pa s

1E5

1E3

1E4

www.campusplastics.com www.campusplastics.com
1E2 1E3
1E0 1E1 1E2 1E3 1E4 1E0 1E1 1E2 1E3 1E4

Shear rate in 1/s Shear rate in 1/s

Last update: 2023-04-05 Source: https://www.campusplastics.com Page: 2/5

Elastollan® 1195 A - (TPU-ARET)
BASF Polyurethanes GmbH

Dynamic shear modulus-temperature Stress-strain

Dynamic shear modulus-temperature Stress-strain
Elastollan® 1195 A Elastollan® 1195 A
1E4 1E0
1E2 35 -40 °C
-20 °C
0 °C
1E3 30
1E1 1E-1 23 °C
Shear modulus in MPa

40 °C
25 60 °C
G" in MPa

tan d in
1E2 80 °C
1E0 1E-2
100 °C

Stress in MPa
20

1E1 1E-3
1E-1 15

1E0 www.campusplastics.com 10
1E-2 1E-4
-100 -50 0 50 100 150 200

5
Temperature in °C

www.campusplastics.com
0
0 10 20 30 40 50

Strain in %

Secant modulus-strain Stress-strain (isochronous) 23°C

Secant modulus-strain Stress-strain (isochronous) 23°C
Elastollan® 1195 A Elastollan® 1195 A

1200 -40 °C 2.5 1 h

-20 °C 10 h
0 °C 100 h
1000 23 °C 2 1000 h
40 °C 10000 h
60 °C 100000 h
Secant modulus in MPa

800 80 °C
Stress in MPa

1.5
100 °C

600
1

400

0.5

200

www.campusplastics.com
0
www.campusplastics.com 0 2 4 6 8 10 12 14
0
0 10 20 30 40 50
Strain in %
Strain in %

Last update: 2023-04-05 Source: https://www.campusplastics.com Page: 3/5

Elastollan® 1195 A - (TPU-ARET)
BASF Polyurethanes GmbH

Creep modulus-time 23°C Stress-strain (TPE)

Creep modulus-time 23°C Stress-strain (TPE)
Elastollan® 1195 A Elastollan® 1195 A

45 0.5 MPa 25 23 °C
1 MPa
40 1.5 MPa
20
Creep modulus in MPa

2 MPa
35

Stress in MPa
15
30

10
25

20 5

www.campusplastics.com
15 www.campusplastics.com
1E0 1E1 1E2 1E3 1E4 1E5 0
0 50 100 150 200 250 300

Time in h
Strain in %

Characteristics

Processing Regional Availability

Injection Molding, Profile Extrusion North America, Europe, Asia Pacific, South and Central America,
Near East/Africa
Delivery form
Pellets

Other text information

Injection molding
Barrel temperature : 205 - 215 °C
Melt temperature : 215 °C
Mold temperature: 25 - 40 °C

Profile extrusion
Barrel temperature : 175 - 205 °C
The data contained in this publication are based on
our current knowledge and experience. In view of
the many factors that may affect processing and
application of our product, these data do not relieve
processors from carrying out their own investigations
and tests. Any descriptions, drawings, photographs,
data, proportions, weights etc. given herein may
change without prior information and do not constitute
the agreed contractual quality of the product. It is
the responsibility of the recipient of our products
to ensure that any proprietary rights and existing
laws and legislation are observed. NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OFMERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE
REGARDING PRODUCTS DESCRIBED OR DESIGNS,
DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY
BE USED WITHOUT INFRINGING THEINTELLECTUAL
PROPERTY RIGHTS OF OTHERS.

In order to check the availability of products please

Last update: 2023-04-05 Source: https://www.campusplastics.com Page: 4/5

Elastollan® 1195 A - (TPU-ARET)
BASF Polyurethanes GmbH

contact us or our sales agency.

For more information about our products contact your

local BASF representative or

BASF Polyurethanes GmbH

European Business Management
Thermoplastische Polyurethane
Elastogranstraße 60
D-49448 Lemförde
Deutschland
Phone: 49 5443 12 3456
Fax: 49 5443 12 2555
e-mail:
[email protected]
www.pu.basf.de

CAMPUS® is a registered trademark of CWFG (Chemie

Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)

Last update: 2023-04-05 Source: https://www.campusplastics.com Page: 5/5