Scribd
Upload
14 views2 pages

Question 1586042

Uploaded by

m768440019
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views2 pages

Question 1586042

Uploaded by

m768440019
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NUCLEON INSTITUTE OF PHYSICS

Gopi Rajeshwar Nagar , Opp. Rajeshwar Mandir Agra

DPP-2 (AC)
Class 12 - Physics
Time Allowed: 1 hour Maximum Marks: 30

1. Calculate the frequency at which the inductive reactance of 0.7 H inductor is 220 Ω .
2. A 44 mH inductor is connected to 220 V, 50 Hz ac supply. Determine the rms value of the current in the circuit.
3. A current of 1A flows through a coil when it is connected across a DC battery of 100 V. If DC battery is replaced by an
AC source of 100 V and angular frequency 100 rad s-1, the current reduces to 0.5 A. Find

ya
i. impedance of the circuit.
ii. self-inductance of coil.

oti
iii. phase difference between the voltage and the current.
4. A coil of self-inductance has inductive reactance of 88 Ω . Calculate the self-inductance of the coil if the frequency is 50
Hz. nd
5. Alternating emf, ε = 220 sin100 πt is applied to a circuit containing an inductance of 1

π
H. Write an equation for
instantaneous current through the circuit. What will be the reading of an a.c. ammeter if connected in the circuit?
Da
6. An a.c. circuit consists of only an inductor of inductance 2H. If the current is represented by a sine wave of amplitude
0.25 A and frequency 60 Hz, calculate the effective potential difference (Veff) across the inductor, (π = 3.14)
7. An alternating voltage ε = 200 sin 300 t is applied across a series combination of R = 10Ω and an inductor of 800 mH.
ul

Calculate:
i. impedance of the circuit
ah

ii. peak value of current in the circuit


iii. power factor of the circuit.
.R

8. A 15.0μF capacitor is connected to 220 V, 50 Hz source. Find the capacitive reactance and the rms current.
9. A reactive element in an AC circuit causes the current flowing
Er

i. to lead in phase by π/2 w.r.t. the applied voltage.


ii. to lag in phase by π/2 w.r.t. the applied voltage.
Identify the element in each case.
10. A circuit containing an 80 mH inductor and a 250 μ F capacitor in series connected to a 240 V, 100 rad/s supply. The
resistance of the circuit is negligible.
i. Obtain rms value of current.
ii. What is the total average power consumed by the circuit?
11. A capacitor of 1 pF is connected to an a.c. source of emf ε = 250 sin 100 π t. Write an equation for instantaneous current
through the circuit and give reading of a.c. ammeter connected in the circuit.
12. A 1.50 μ F capacitor is connected to a 220 V, 50 Hz source. Find the capacitive reactance and the current (rms and peak)
in the circuit. If the frequency is doubled, what happens to the capacitive reactance and the current?

1/2
Er.Rahul dandotiya Physics -9897520151
13. The current through a resistor is 2 A when connected to a 220 V, 50 Hz line. Find the value of capacitor which is to be
connected to reduce the current to 1A.
14. A 20 V-5 W lamp is to run on 200 V - 50 Hz a.c. mains. Find the capacitance of a capacitor required to run the lamp.
15. A 200 mH (pure) inductor and a 5 μ F (pure) capacitor are connected one by one, across a sinusoidal ac voltage source of
V = [70.7sin (1000 t)] voltage. Obtain the expression for the current in each case.

ya
oti
nd
Da
ul
ah
.R
Er

2/2
Er.Rahul dandotiya Physics -9897520151

You might also like