Scribd Logo
Upload

Welcome to Scribd!

  • 1 views

    SWP_Drill_Press_AS514

    Uploaded by

    eaydin

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    SWP_Drill_Press_AS514

    Uploaded by

    eaydin
    1 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    1 views2 pages

    SWP_Drill_Press_AS514

    Uploaded by

    eaydin

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    Engineering Innovation Hub – Safe Work Procedure

    DRILL PRESS
    DO NOT use this equipment unless you have been instructed
    in its safe use and operation and have been given permission

    PERSONAL PROTECTIVE EQUIPMENT


    Safety glasses must be worn Long and loose hair must be Gloves must not be worn.
    at all times in work areas. contained.

    Sturdy footwear must be worn Close fitting/protective Rings and jewellery must not
    at all times in work areas. clothing must be worn. be worn.

    PRE-OPERATIONAL SAFETY CHECKS  Do not hold the item being drilled with your hands.
     Locate and ensure you are familiar with all machine Use a clamp.
    operations and controls.
     Ensure all guards are fitted, secure and functional.
    Do not operate if guards are missing or faulty.
     Check workspaces and walkways to ensure no
    slip/trip hazards are present.
     Ensure the chuck key (if used) has been removed
    from the drill chuck.
     Follow correct clamping procedures to ensure work
    is secure.
     Erect a barricade if the job obstructs the walkway.
     Adjust the spindle speed to suit drill or cutter
    diameter.

    OPERATIONAL SAFETY CHECKS


     Before making adjustments or before cleaning swarf
    accumulations, switch off and bring the machine to a
    complete standstill.
     Feed downwards at a sufficient rate to keep the drill
    cutting.
     Feed with care as the drill breaks through the
    underside of the work.
     Use a safe working posture.
    ENDING OPERATIONS AND CLEANING UP
     Switch off the machine when work completed.
     Leave the machine in a safe, clean and tidy state.
    POTENTIAL HAZARDS AND INJURIES
     Hair/clothing getting caught in moving machine parts.
     Eye injuries.
     Flying swarf and chips.
     Sharp edges and burrs.

    DON’T
     Do not use faulty equipment. Immediately report
    suspect equipment.
     Never leave the machine running unattended.
    This SWP does not necessarily cover all possible hazards
    associated with this equipment and should be used in
    conjunction with other references. It is designed as a guide
    to be used to compliment training and as a reminder to
    users prior to equipment use.

    You might also like