Scribd
Upload
19 views2 pages

Software Lab Quiz Questions

Uploaded by

preetd.0945
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views2 pages

Software Lab Quiz Questions

Uploaded by

preetd.0945
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Software Lab Quiz Questions

Q1 In Envelope detector, find max value of R in the envelope detector, if capacitance is 0.1 mF. In
DSB-FC, the message signal is m(t)=cos(2πt) and carrier signal are c(t)=10cos(2π100t).

Q2 Find the rectifier detector output if m(t)=cos(2πt) and carrier signal is 10cos(2π100t), at t=0 sec.

Q3 modulation index if message signal is m(t)=1+cos(2πt) and carrier signal are c(t)=10cos(2π100t).

Q4 In a DSB-FC signal, if the carrier power Pc is 100 mW and the modulation index μ is 0.5, what is
the total power in the modulated signal?

Q5 If the bandwidth of the modulated signal in a DSB-SC is 200Hz, what is the bandwidth of the
modulating signal?

Q6 For a DSB-FC signal, if the carrier frequency is 1 MHz and the modulating signal has a frequency
of 5 kHz, what is the bandwidth of AM?

Q7 For a DSB-FC signal, if the carrier frequency is 1 MHz and the modulating signal has a frequencies
5 kHz and 10 kHz, what is the maximum frequency of AM signal?

Q8 In DSB-FC AM system, the power efficiency of the transmitter is 10 %. Determine the upper side
band power in mW, if carrier power is 5 mW.

Q9 A baseband signal consists of frequency components at 5 kHz and 10 kHz. The carrier frequency
used in DSB-SC is 10 MHz. Determine the maximum frequency component in the lower sideband of
the AM. Answer in kHz.

Q10 In DSB-FC, the baseband signal is m(t)= cos(2πt) and the carrier signal is c(t)= 10cos(2π100t).
Determine the power efficiency of the transmitter in %.

Q11 A tone signal consists of frequency components at 5 kHz. In DSB-FC, the carrier frequency is 10
MHz. Determine the bandwidth of the AM signal in kHz.

Q12 Determine 5sin(2π10t)*1/(πt) at t=0 sec.

Q13 A signal (5+cos(2π10t))cos(2π100t) is demodulated by an envelope detector. If RC=0, then


determine the duty cycle of the detected waveform.

Q14 Determine the Hilbert transform of signal 5cos(2π10t)-10sin(2π20t) at t=0 sec.

Q15 The carrier frequency of the modulated wave 7.2cos(7.5t)cos(1495.7t) needs to shift to 3782.3
rad/sec, using a frequency mixer. Determine the maximum frequency in the output of the frequency
mixer. Answer in rad/sec.

Q16 Find the square of the modulation index of the DSB-FC signal when the message signal is
6.7cos(3.7t)+4.1cos(7.6t) and the carrier signal is 11.3cos(1425.6t).

Q17 A DSB-FC waveform (8.6+Acos(5t))cos(1758.9t) has zero modulation index. Find the maximum
frequency of the AM signal. Answer in rad/sec.

Q18 The AM signal (5.5cos(2π9.3t)+3.4cos(2π15.8t))cos(2π2247.4t) is transmitted. Find the


minimum frequency of the upper side band—answer in Hz.

Q19 An AM signal (7.4+1.1cos(2π8.6t))cos(2π1366.7t) is transmitted. Find the bandwidth of the AM


if the modulation index is doubled. Answer in Hz
Q20 The AM signal (4.8+A cos(2π9t))cos(2π1916.3t) with zero modulation index is transmitted.
Determine the bandwidth of the transmitted signal.

Q21 Find the value of the signal 7.8 ( δ(f-6.4) - δ(f+6.4) )/( 2j ) x (-j sgn(f) ) at time t=0 sec. Here f is in
Hz and δ represents the impulse function.

Q22 The (2.1+A cos(2π6.8t))cos(2π1492t) with zero modulation index is detected by the envelope
detector. Determine the output of the envelope detector at t = 0 sec.

Q23 An ideal band pass filter at the transmitter of the vestigial sideband modulator is centred at
carrier frequency 4.2 kHz, with gain 6.9. Determine the gain of the low-pass filter used at the receiver
at 0 Hz.

Q24 A baseband signal 5.8cos(2π7.9t) is fed into an FM modulator. The Kf=0.2 is used in the
modulator. Determine the bandwidth of the modulated waveform. Answer in Hz

Q25 Find the instantaneous frequency of signal 3.6cos(6.8t^2+2t) at t=1 sec. Answer in rad/sec

Q26 A baseband signal 5cos(2πt)+6.5cos(2π10t) modulates a carrier 3.4cos(2π1428.6t) to generate


a vestigial sideband (VSB) signal. Determine the bandwidth of the VSB signal. Answer in Hz

Q27 When a phase-modulated signal is generated by a direct method, determine the maximum
value of the phase constant (Kp) if the message signal varies between 7.7 V and 106.7 V.

Q28 Signal y(t)= ∫x(t)dt, and x(t)=cos(2π3.7t). Determine the bandwidth of y(t). Answer in Hz

You might also like