S1

ESCOM Consultants Pvt. Ltd.

PROJECT:- NBRC _ TERI

BUILDING:-
LOCATION:- GURGAON
SLAB MARKING.:- S1
REVISION NO.:-

Design of Slab as per IS:456-2000:

Input Data:
1 2
Material :
2
Concrete Grade M 25
Reinforcement Steel Grade Fe 500
Dimensions:
Clear Short Span : Lx: 4.44 m
Clear Long Span : Ly: 6.4 m
Width of supporting beam : 0.3 m 3 4
3 4
Effective Short Span : Lx: 4.55 m
Effective Long Span : Ly: 6.50 m

Clear Cover: 20 mm (Cover should comply clause 26.4 of IS:456)

Boundary Condition: 1 * For Two way slab,refer the sketch
on the right side.Dark line shows 5 6
the continuity. 5 6
* For one way continuous slab,
5 for Intermediate Panel,7 for end Panel,
* For one way discontinuous slab, 9.
* For cantilever slab, 10.
Load : 7 8
7 8
Self weight of slab : D*25 = 3.25 kN/m2
Floor Finish Load wf: 75 mm 1.80 kN/m2
Sunk Load : 0 mm 0 kN/m2
Live Load wL: 4 kN/m2
Total load intensity (w) 9.05 kN/m2 9
9
Load Factor for BM: 1.5
Load Factor for SF: 1.5

Calculations:
Aspect ratio=Ly/Lx= 1.4290429
Slab designed as: Two Way Slab
Bending Moment Coefficients:
ax support = 0.0516 For short span support moment.
ax span = 0.0396 For short span span moment.
ay support = 0.032 For Long span support moment.
ay span = 0.024 For Long span span moment.

Depth assumed D = 130 mm OK

Effective depth dx= D - Eff. Cover= 105 mm
Effective depth dy= D - Eff. Cover= 95 mm
Factored Bending Moments=Factor x w x Coefficient x Lx2
Mu/bd2 pt reqd. from charts Ast reqd.
% mm2/ m
Mux support= 14.464 kN m 1.312 0.323 339
Mux span= 11.099 kN m 1.007 0.243 256
Muy support= 8.973 kN m 0.994 0.240 228
Muy span= 6.730 kN m 0.746 0.178 169
Minimum Ast req=0.12xD/1000= 156 mm2 per meter

Reinforcement Provided:
Short Span Support: 10 Dia at 200 c/c Ast= 393 OK
Short Span Span: 10 Dia at 200 c/c Ast= 393 OK
Long Span Support: 8 Dia at 200 c/c Ast= 251 OK
Long Span Span: 8 Dia at 200 c/c Ast= 251 OK

Check for Deflection:

Basic L/d = 26 (Clause 23.2.1 of IS 456-2000)
Modification factor= 1.76701052 ( Figure 4 of IS 456-2000)
d req as per deflection control=Lx/(Basic L/d x Modification factor )= 98.93 mm
d required < d provided so, OK

Check for Shear :

Page 1
 S1

At Short direction:
Vu (Short_dir) = 20.57 kN

tv = Vu/bd = 0.196 N/mm^2

pt% = 0.37
b= 7.77 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.43 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)
k= 1.30 (As per IS:456:2000:40.2.1.1)
k*tc = 0.56 OK

At Long direction:
Vu (Long_dir) = Wu*Lx*(R/(2+R) = 25.71 kN
(Where R=Ly/Lx) = 1.429

tv = Vu/bd = 0.271 N/mm2

pt% = 0.26
b= 10.98 [As per SP_16, b=0.8*fck/(6.89*pt)], but not less than 1
tc _max (Table_19) = 0.37 N/mm2 [As per SP_16, tc=[0.85*root(0.8*fck)*root(1+5b)-1]/(6*b)
k= 1.30 (As per IS:456:2000:40.2.1.1)
k*tc = 0.49 OK

Page 2
DALAL CONSULTANTS ENGINEERS LIMITED
12/05/2024

For Cantilever Slab,Parapet Wall Details:

Wall at the end of Wall Height: 0.9
Cantilever slab Wall Thk: 0.115
TWO WAY slab

Fck:- 25 Cover 20 REINFORCEMENT

Lx Lz WL WF Boundary treq tprov treq SHORT SPAN
SHORT LONG Live Finish Condition initial final SPAN SUPPORT
m m Kn/m Kn/m Required Provided Required Provided
4.55 6.5 4 1.8 1 99 130 119 10 307.2 10 200 10 232 10 200
LONG SPAN
1 2 3 SPAN SUPPORT
3 Required Provided Required Provided
4 5 6 8 297.4 8 200 8 220 8 200
6
5
7 8 9
9

Boundary Conditions: Two Way Slab: 1 to 9 as per code

One Way Slab: 5 for Intermediate panel
7 for End Panel
9 for Simply Supported
Cantilever Slab: 10

Page 3
 Sheet3

TWO WAY SLAB:

Lx(Short Span) 4545
Lz(Long Span) 6495 Total load intensity (w)
Aspect ratio 1.429 9.05 kN/m2
slab th(ini) 165.673
slab th(pro) 130 wu Factored Load 13.575 kN/m2
Boundary condition 1 Fck 25 Fy 500
Mu SUPP(short) 14.4643 Ast req 338.6852 Ast pro 392.5
Mu SPAN (short) 11.1 Ast req 255.5668 Ast pro 392.5
Mu SUPP(long) 8.97341 Ast req 228.2157 Ast pro 251.2
5
Mu SPAN(long) 6.73006 Ast req 168.9474 Ast pro 251.2 5
Thickness Req 118.928
26

fs 188.826432319835 189 pt 0.37381

l 1.76701051623281

Effective depth of the slab reqd. = 65 mm

ax support = 0.05158 Total Thk. 90 mm
ax span = 0.04
ay support = 0.032
ay span = 0.024

SLAB: REINFORCEMENT DETAILS

CONCRETE GRADE fck= 25
STEEL GRADE fy = 500

B D d Mu Mu/Bd2 pt Ast
1000 130 105 14.46426 1.311951 0.323 338.685221
1000 130 105 11.09923 1.006733 0.243 255.566809
1000 130 95 8.973412 0.994284 0.240 228.21574
1000 130 95 6.730059 0.745713 0.178 168.947361

REQUIRD 8 TOR @ 149 C/C. MAXIMUM SPACING:

COMBINE 8 10 191 C/C

fs 0.2 0.3 0.4 0.5 0.6

120 2 2 2 2 2
145 2 2 2 1.9 1.8
190 2 1.85 1.7 1.55 1.4
240 1.7 1.5 1.35 1.25 1.15
290 1.4 1.25 1.15 1.075 1
lambda #N/A #N/A #N/A #N/A #N/A

#N/A

5 7 9 10
Support 0.08333 0.1 0 0.5
Span 0.0625 0.083 0.125 0

Page 4
 Sheet3

1 2 3 4 5 6 7
0.0515808580858086 0.05558 0.0641617161716171 0.072162 0.05929 0 0.08116172
0.0395808580858086 0.04187 0.0481617161716172 0.053871 0.04429 0.064452 0.06116172
0.032 0.037 0.037 0.047 0 0.045 0
0.024 0.028 0.028 0.035 0.035 0.035 0.043

Types
Case no. of Moments considered
Panels Short Span Coefficients

(Values of ly/lx)
1 1.1 1.2 1.3
Interior
1
Panels Negative moment at 0.032 0.037 0.043 0.047
conti. edge.
Positive moment at 0.024 0.028 0.032 0.036
Mid-span
One
Short
2 Edge
Disconti
nuous. Negative moment at 0.037 0.043 0.048 0.051
conti. edge.
Positive moment at 0.028 0.032 0.036 0.039
Mid-span
One
Long
3 Edge
Disconti
nuous. Negative moment at 0.037 0.044 0.052 0.057
conti. edge.
Positive moment at 0.028 0.033 0.039 0.044
Mid-span

Two
Adjacen
4 t Edges
Disconti
nuous.
Negative moment at 0.047 0.053 0.06 0.065
conti. edge.
Positive moment at 0.035 0.04 0.045 0.049
Mid-span
Two
Short
5 Edges
Disconti
nuous. Negative moment at 0.045 0.049 0.052 0.056
conti. edge.
Positive moment at 0.035 0.037 0.04 0.043
Mid-span

Page 5
 Sheet3

Two
Long
6 Edges
Disconti
nuous. Negative moment at 0 0 0 0
conti. edge.
Positive moment at 0.035 0.043 0.051 0.057
Mid-span
One
Long
7 Edge
continuo
us. Negative moment at 0.057 0.064 0.071 0.076
conti. edge.
Positive moment at 0.043 0.048 0.053 0.057
Mid-span
One
Short
8 Edge
continuo
us. Negative moment at 0 0 0 0
conti. edge.
Positive moment at 0.043 0.051 0.059 0.065
Mid-span
Four
Edges
9
Disconti
nuous. Negative moment at 0 0 0 0
conti. edge.
Positive moment at 0.056 0.064 0.072 0.079
Mid-span

Page 6
 Sheet3

1 2
2

3 4
3 4

5 6
5 6

7 8
7 8

9
9

Ast min
156
156
156
156

315

0.7 0.8 1
1.9 1.8 1.6
1.68 1.55 1.4
1.35 1.3 1.2
1.1 1.05 1
0.95 0.9 0.85
#N/A #N/A #N/A
1.4
1.5
0.290429

Page 7
 Sheet3

8 9
0 0
0.072452 0.086162
0.057 0
0.043 0.056

Coefficien
ts for all
Short Span Coefficients values of

(Values of ly/lx)
1.4 1.5 1.75 2 ly/lx

0.051 0.053 0.06 0.065 0.032

0.039 0.041 0.045 0.049 0.024

0.055 0.057 0.064 0.068 0.037

0.041 0.044 0.048 0.052 0.028

0.063 0.067 0.077 0.085 0.037

0.047 0.051 0.059 0.065 0.028

0.071 0.075 0.084 0.091 0.047

0.053 0.056 0.063 0.069 0.035

0.059 0.06 0.065 0.069 0

0.044 0.045 0.049 0.052 0.035

Page 8
 Sheet3

0 0 0 0 0.045

0.063 0.068 0.08 0.088 0.035

0.08 0.084 0.091 0.097 0

0.06 0.064 0.069 0.073 0.043

0 0 0 0 0.057

0.071 0.076 0.087 0.096 0.043

0 0 0 0 0

0.085 0.089 0.1 0.107 0.056

Page 9
def. support/span check

Clause 20.2, IS 456