Scribd
Upload
32 views

Assignment 1

Analog assignment

Uploaded by

Harsh Apoorva
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
32 views

Assignment 1

Analog assignment

Uploaded by

Harsh Apoorva
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment I

Q. 1 Calculate IE in a transistor for which β = 50 and IB = 20 μA.

Q. 2 For a transistor, β = 45 and voltage drop across 1kΩ which is connected in the collector circuit is 1 volt. Find
the base current for common emitter connection.

Q.3 For the common base circuit shown in Fig. , determine IC and VCB. Assume the transistor to be of silicon.

Q. 4 Fig. shows that a silicon transistor with β = 100 is biased by base resistor method. Draw the d.c. load line and
determine the operating point. What is the stability factor?

Q. 5 Fig (i) shows the base resistor transistor circuit. The device (i.e. transistor) has the characteristics shown in Fig.
2 (ii). Determine VCC, RC and RB .
Q. 6 For the emitter bias circuit shown in Fig., find IE, IC, VC and VCE for β= 85 and VBE = 0.7V.

Q. 7 Fig. shows a silicon transistor biased by collector feedback resistor method. Determine the operating point.
Given that β = 100.

Q. 8 Find the d.c. bias values for the collector-feedback biasing circuit shown in Fig. How does the circuit maintain
a stable Q point against temperature variations?
Q. 9 Calculate the emitter current in the voltage divider circuit shown in Fig. Also find the value of VCE and
collector potential VC.

Q. 10 An npn transistor circuit as shown in Fig. has α = 0.985 and VBE = 0.3V. If VCC =16V, calculate R1 and RC to
place Q point at IC = 2mA,VCE = 6 volts.

You might also like