Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 15-Mar-24
Design code AISC 360-16

Material
Steel S235
Concrete C35

1/8
Project:
Project no:
Author:

Project item BP2

Design
Name BP2
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns

β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
COL 2 - BoxFl200x(100/100) 0.0 -90.0 0.0 0 0 0 Node

Cross-sections
Name Material
2 - BoxFl200x(100/100) S235

Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
3/4 A307 3/4 A307 19 414.0 285

2/8
Project:
Project no:
Author:

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 COL -6.3 -0.2 7.8 0.0 -6.9 0.1

Foundation block
Item Value Unit
CB 1
Dimensions 680 x 500 mm
Depth 1050 mm
Anchor 3/4 A307
Anchoring length 250 mm
Shear force transfer Anchors

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.0 < 5.0% OK
Anchors 81.4 < 100% OK
Welds 75.8 < 100% OK
Concrete block 5.8 < 100% OK
Buckling Not calculated

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
COL-tfl 1 235.0 5.0 LE1 103.0 0.0 0.0 OK
COL-bfl 1 235.0 5.0 LE1 38.9 0.0 0.0 OK
COL-w 1 235.0 5.0 LE1 83.6 0.0 0.0 OK
COL-w 2 235.0 5.0 LE1 61.0 0.0 0.0 OK
BP1 235.0 8.0 LE1 211.6 0.0 0.0 OK

Design data
fy εlim
Material
[MPa] [%]
S235 235.0 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

3/8
 Project:
Project no:
Author:

Overall check, LE1

Strain check, LE1

4/8
 Project:
Project no:
Author:

Equivalent stress, LE1

Anchors
Nf V ϕNcbg ϕVcbg ϕVcp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [kN] [kN] [%] [%] [%]
A5 LE1 0.0 1.8 - 43.1 181.5 0.0 18.2 5.8 OK
A6 LE1 0.6 1.1 65.4 43.1 181.5 81.4 18.2 76.8 OK
A7 LE1 5.0 1.0 65.4 45.8 181.5 81.4 5.6 71.8 OK
A8 LE1 13.4 1.5 65.4 - 181.5 81.4 4.4 71.5 OK
A9 LE1 0.0 1.4 - - 181.5 0.0 4.3 0.5 OK
A10 LE1 34.3 1.1 65.4 - 181.5 81.4 4.3 71.5 OK

Design data
ϕNsa ϕVsa
Grade
[kN] [kN]
3/4 A307 - 1 62.4 34.8

5/8
 Project:
Project no:
Author:

Symbol explanation
Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕNcbg Concrete breakout strength in tension – ACI 318-14 – 17.4.2
ϕVcbg Concrete breakout strength in shear – ACI 318-14 – 17.5.2
ϕVcp Concrete pryout strength in shear – ACI 318-14 – 17.5.3
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
BP1 COL-tfl 1 E70xx ◢2.1 ◢3.0 100 17 LE1 8.6 11.4 75.8 OK
BP1 COL-bfl 1 E70xx ◢2.1 ◢3.0 100 17 LE1 5.5 11.0 50.0 OK
BP1 COL-w 1 E70xx ◢2.1 ◢3.0 189 19 LE1 9.9 13.1 75.5 OK
BP1 COL-w 2 E70xx ◢2.1 ◢3.0 189 19 LE1 5.7 12.7 44.7 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Concrete block
A1 A2 σ Ut
Item Loads Status
[mm2] [mm2] [MPa] [%]
CB 1 LE1 27747 174658 2.2 5.8 OK

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Buckling
Buckling analysis was not calculated.

6/8
Project:
Project no:
Author:

Bill of material

Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]

Fillet: a = 2.1 290.0

BP1 P8.0x280.0-290.0 (S235) 1 3/4 A307 6
Fillet: a = 2.1 290.0

Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Fillet E70xx 2.1 3.0 290.0
Fillet E70xx 2.1 3.0 290.0

Anchors
Length Drill length
Name Count
[mm] [mm]
3/4 A307 258 250 6

Drawing

BP1

7/8
Project:
Project no:
Author:

P8.0x290-280 (S235)

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion
No AISC 360-16: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints

8/8