Project:

Project no:
Author:

Project data
Project name
Project number
Author
Description
Date 15-Mar-24
Design code AISC 360-16

Material
Steel S235
Concrete C35

1/8
Project:
Project no:
Author:

Project item BP1

Design
Name BP1
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016

Beams and columns

β – Direction γ - Pitch α - Rotation Offset ex Offset ey Offset ez
Name Cross-section Forces in
[°] [°] [°] [mm] [mm] [mm]
COL 2 - BoxFl200x(100/100) 0.0 -90.0 0.0 0 0 0 Node

Cross-sections
Name Material
2 - BoxFl200x(100/100) S235

Anchors
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
3/4 A307 3/4 A307 19 414.0 285

2/8
Project:
Project no:
Author:

Load effects (equilibrium not required)

N Vy Vz Mx My Mz
Name Member
[kN] [kN] [kN] [kNm] [kNm] [kNm]
LE1 COL -12.6 -0.8 1.8 0.1 -9.2 0.1

Foundation block
Item Value Unit
CB 1
Dimensions 680 x 500 mm
Depth 1050 mm
Anchor 3/4 A307
Anchoring length 200 mm
Shear force transfer Anchors

Check

Summary
Name Value Check status
Analysis 100.0% OK
Plates 0.1 < 5.0% OK
Anchors 96.8 < 100% OK
Welds 83.8 < 100% OK
Concrete block 9.1 < 100% OK
Buckling Not calculated

Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
COL-tfl 1 235.0 5.0 LE1 136.9 0.0 0.0 OK
COL-bfl 1 235.0 5.0 LE1 53.9 0.0 0.0 OK
COL-w 1 235.0 5.0 LE1 83.4 0.0 0.0 OK
COL-w 2 235.0 5.0 LE1 87.4 0.0 0.0 OK
BP1 235.0 8.0 LE1 211.8 0.1 0.0 OK

Design data
fy εlim
Material
[MPa] [%]
S235 235.0 5.0

Symbol explanation
εPl Plastic strain
σcEd Contact stress
σEd Eq. stress
fy Yield strength
εlim Limit of plastic strain

3/8
 Project:
Project no:
Author:

Overall check, LE1

Strain check, LE1

4/8
 Project:
Project no:
Author:

Equivalent stress, LE1

Anchors
Nf V ϕNcbg ϕVcbg ϕVcp Utt Uts Utts
Shape Item Loads Status
[kN] [kN] [kN] [kN] [kN] [%] [%] [%]
A5 LE1 0.9 0.5 81.4 44.9 186.8 96.8 4.1 95.2 OK
A6 LE1 0.8 0.5 81.4 44.9 186.8 96.8 4.1 95.2 OK
A7 LE1 16.4 0.2 81.4 32.3 186.8 96.8 3.1 95.0 OK
A8 LE1 15.6 0.4 81.4 - 186.8 96.8 1.3 94.8 OK
A9 LE1 6.8 0.4 81.4 - 186.8 96.8 1.2 94.8 OK
A10 LE1 38.3 0.1 81.4 - 186.8 96.8 1.1 94.8 OK

Design data
ϕNsa ϕVsa
Grade
[kN] [kN]
3/4 A307 - 1 62.4 34.8

5/8
 Project:
Project no:
Author:

Symbol explanation
Nf Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕNcbg Concrete breakout strength in tension – ACI 318-14 – 17.4.2
ϕVcbg Concrete breakout strength in shear – ACI 318-14 – 17.5.2
ϕVcp Concrete pryout strength in shear – ACI 318-14 – 17.5.3
Utt Utilization in tension
Uts Utilization in shear
Utts Utilization in tension and shear
ϕNsa Steel strength of anchor in tension - ACI 318-14 – 17.4.1
ϕVsa Steel strength of anchor in shear - ACI 318-14 – 17.5.1

Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
BP1 COL-tfl 1 E70xx ◢2.1 ◢3.0 100 17 LE1 9.6 11.5 83.8 OK
BP1 COL-bfl 1 E70xx ◢2.1 ◢3.0 100 17 LE1 8.7 11.5 75.4 OK
BP1 COL-w 1 E70xx ◢2.1 ◢3.0 190 19 LE1 10.0 12.7 78.4 OK
BP1 COL-w 2 E70xx ◢2.1 ◢3.0 190 19 LE1 10.1 12.7 79.0 OK

Symbol explanation
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of weld critical element
Fn Force in weld critical element
ϕRn Weld resistance AISC 360-16 J2.4
Ut Utilization

Concrete block
A1 A2 σ Ut
Item Loads Status
[mm2] [mm2] [MPa] [%]
CB 1 LE1 27121 173802 3.5 9.1 OK

Symbol explanation
A1 Loaded area
A2 Supporting area
σ Average stress in concrete
Ut Utilization

Buckling
Buckling analysis was not calculated.

6/8
Project:
Project no:
Author:

Bill of material

Manufacturing operations
Plates Welds Length
Name Shape Nr. Bolts Nr.
[mm] [mm] [mm]

Fillet: a = 2.1 290.0

BP1 P8.0x280.0-290.0 (S235) 1 3/4 A307 6
Fillet: a = 2.1 290.0

Welds
Throat thickness Leg size Length
Type Material
[mm] [mm] [mm]
Fillet E70xx 2.1 3.0 290.0
Fillet E70xx 2.1 3.0 290.0

Anchors
Length Drill length
Name Count
[mm] [mm]
3/4 A307 208 200 6

Drawing

BP1

7/8
Project:
Project no:
Author:

P8.0x290-280 (S235)

Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
Limit plastic strain 0.05 -
Plastic
Weld stress evaluation
redistribution
Detailing No
Distance between bolts [d] 2.66 - AISC 360-16 – J3.3
Distance between bolts and edge [d] 1.25 - AISC 360-16 – J.3.4
Concrete breakout resistance check Both
Base metal capacity check at weld fusion
No AISC 360-16: J2-2
face
Cracked concrete Yes ACI 318-14 – Chapter 17
Local deformation check No
Local deformation limit 0.03 - CIDECT DG 1, 3 - 1.1
Analysis with large deformations for hollow section
Geometrical nonlinearity (GMNA) Yes
joints

8/8