3D Analysis
3D Analysis
3D Analysis
2. Expand the Components section of the Model Browser tree and right-click on the engine mount
component. Select Assign from the context-sensitive menu. Assign the Solid Property to the
engine mount component and click OK.
3
1. Right-click in the Model Browser and select Create > Load Collector. Name it “Pressure”.
2. From the menu bar clic on BCs > Create > Pressures:
3. Set the entity selector on “Faces” and choose the upper flat ring area and apply a pressure of
2.0 MPa magnitude.
4
4. Right-click in the Model Browser and select Create > Load Collector. Name it “Fixed”.
5. From the menu bar clic on BCs > Create > Constraints.
6. With a selector set on “Faces” choose the following bottom of the solid. Keep the six Degrees of
freedom selected.
Step 5: Create a new loadcase for pressure loading and request outputs
1. Right-click in the Model Browser and select Create > Load step. Name it “Linear static”.
2. Set the Analysis Type Linear static and set the other values as shown.
3. Enter the control cards panel on the Analysis page. Navigate to the second page and enter the
GLOBAL_OUTPUT_REQUEST.
4. Activate the check box for STRAIN, STRESS and DISPLACEMENT, setting FORMAT (1) to H3D and
OPTION (1) to ALL.
5. Exit the control cards panel.
4. When the run completes, click the Results button to load the analysis results into a new
HyperView window.