lOMoARcPSD|49777476

Csiplearninghub.com-Comprehensive Digital Documentation

Class 10 Notes using Libre Office Writer IT 402
Computer Science (University of Jammu)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Comprehensive Digital Documentation Class 10 Notes

using LibreOffice Writer IT 402
csiplearninghub.com/digital-documentation-class-10-notes-it-402

Digital Documentation Class 10 Notes using LibreOffice Writer

UNIT 1: DIGITAL DOCUMENTATION Class 10 Notes

The Central Board of Secondary Education (CBSE) has revised the syllabus
for Class 10 Information Technology (IT-402). The revised syllabus focuses on
the role of a Domestic Data Entry Operator in the IT-ITeS industry.

CBSE introduces the LibreOffice in class 10 in place of OpenOffice.

So I created the updated notes and Question Answers of topic Unit 1: Digital
Documentation (Advanced) using LibreOffice Writer. Links of all are given
below.

Unit 1: Digital Documentation (Advanced) using LibreOffice Writer

Chapter 1. Introduction to Styles – NOTES

Chapter 1. Introduction to Styles – Question Answers

Chapter 2. Working with Images – NOTES

Chapter 2. Working with Images – Question Answers

Chapter 3. Advanced features of Writer – NOTES

Chapter 3. Advanced features of Writer – Question Answers

NOTES given below are according to OLD Syllabus ie OpenOffice

Digital Documentation Class 10 Notes using LibreOffice Writer

SESSION 1: CREATE AND APPLY STYLES IN THE DOCUMENT

A style is a set of formats that you can apply to selected pages, text in your
document to quickly change their appearance. Advantages of using Style are :

1/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

1. Styles help us to apply consistent formatting to the documents.

2. Style make the major formatting changes simple.

3. Using styles we can easily change the existing format.

OpenOffice.org supports the following types of styles:

1) Page styles include margins, headers and footers, borders and backgrounds.

2) Paragraph styles control all aspects of a paragraph’s appearance, such as text

alignment, tab stops, line spacing etc.

3) Character styles affect selected text within a paragraph, such as the font and
size of text, or bold and italic formats.

4) Frame styles are used to format graphic and text frames.

5) Numbering styles apply similar alignment, numbering or bullet characters, and

fonts to numbered or bulleted lists.

6) Cell styles include fonts, alignment, borders, background and cell protection.

7) Graphics styles in drawings and presentations include line, area, shadowing,

transparency etc.

8) Presentation styles include attributes for font, indents, spacing, alignment, and
tabs.

Apply Style using Styles and Formatting window

1 Click Format > Styles and Formatting or press F11.

2. The Styles and Formatting window shows the types of styles available for the
OpenOffice.

3. Click on any one of the icons to display a list of styles in a particular category.

4. Position the insertion point in the paragraph, frame, or page, and then double-
click on the name of the style which you want to apply.

Apply Style using Fill Format mode

1) Open the Styles and Formatting window and select the style you want to apply.

2) Click the Fill Format mode icon.

3) To apply a paragraph, page, or frame style, hover the mouse over the paragraph,
page, or frame and click.

2/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

NOTE : Fill Format mode is quite useful when you need to format many scattered
paragraphs, cells, or other items with the same style.

Creating New (Custom) Styles:

We can create New Styles in two ways

1) Creating a new style from a selection: Steps are as follows

a) Open the Styles and Formatting window and choose the type of style you want
to create.

b) In the document, select the item you want to save as a style.

c) Click on the New Style from Selection icon from the Styles and Formatting
window.

d) Type a name for the new style and Click OK to save the new style.

2) Dragging And Dropping To Create A Style

Select some text and drag it to the Styles and Formatting window. If Paragraph
Styles are active, the paragraph style will be added to the list. If Character Styles
are active, the character style will be added to the list.

Modifying Custom or Pre defined Styles :

OpenOffice.org provides several ways to modify styles (both the predefined styles
and custom styles that you create):

A) Updating A Style From A Selection : To update a style from a selection follow the
following steps:

1. Open the Styles and Formatting window

2. Select an item from the document whose format you want to adopt as a style.

3. In the Styles and Formatting window, select the style you want to update , then
click on the arrow next to the New Style from Selection icon and click on Update
Style.

B) Loading Styles From A Template Or Document :

1. Open the document you want to copy styles into.

2. In the Styles and Formatting window, long-click on the arrow next to the New
Style from Selection icon, and then click on Load Styles.

3. Load style dialog box appears.

3/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

4. Select the categories of styles to be copied.

5. Click OK.

QUESTIONS based on Digital Documentation Class 10 Notes

Q1. What do you mean by Style?

Q2. Write two advantages of using styles in digital documentation.

Q3. Write four types of styles available in OpenOffice.org

Click here for Answers of above Questions ——————— Click here for more
Questions and Answers

Digital Documentation Class 10 Notes using LibreOffice Writer

SESSION 2. INSERT AND USE IMAGES

INSERT IMAGE:
Images can be added to a document in several ways: by inserting an image file,
directly from a graphics program or a scanner, or from the Open Office Gallery.

1. Inserting An Image File :

When the image is in a file stored on the computer, you can insert it into an Open
Office document using either of the following methods :

A. Drag and Drop

1. Open a file browser window and locate the image you want to insert.

2. Drag the image into the Writer document and drop it where you want it to appear.

B. Insert Picture Dialog

1. Click in the Open Office document where you want the image to appear.

2. Choose Insert > Picture > From File from the menu bar.

3. On the Insert Picture dialog , select the file to be inserted and click Open.

2. Inserting An Image From The Clipboard :

a. Open the source document and the target document.

4/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

b. In the source document, select the image and press Ctrl + C to copy image.

c. Switch to the target document and place the cursor where the image is to be
inserted.

d. Press Ctrl + V to paste the image.

3. Inserting An Image Using A Scanner :

If a scanner is connected to your computer Open Office can call the scanning
application and inserted the scanned item into the document. To start this
procedure, select Insert > Picture > Scan > Select Source.

4. Inserting An Image From The Gallery :

a) To open the Gallery, click on the Gallery icon or choose Tools > Gallery

b) Select the image from the Gallery.

c) Drag image from the Gallery into the Writer document or right-click on the
picture and choose Insert>Copy

MODIFY IMAGE :
When you insert a new image, you may need to modify it to suit the document. We
can modify image by using Picture toolbar, resizing, cropping etc

1. Using The Picture Toolbar :

When you insert an image or select one already present in the document, the
Picture toolbar appears. You can set it by clicking View > Toolbars > Picture. Two
other toolbars can be opened from this one: the Graphic Filter toolbar and Color
Toolbar.

From these three toolbars, you can apply small corrections to the graphic or obtain
special effects.

Graphics mode : You can change color images to grayscale by selecting the image
and then selecting Grayscale from the Graphics mode list

Flip vertically or horizontally : To flip an image vertically or horizontally, select the

image, and then click the relevant icon.

Filters : Following Table provides a short description of the available filters. Feel
free to experiment with the different filters and filters settings. You can undo all the
changes by pressing Ctrl+Z or Alt+Backspace or by selecting Edit > Undo.

5/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Digital Documentation Class 10 Notes Table

Transparency : Modify the percentage value in the Transparency box on the Picture
toolbar to make the image more transparent. This is useful for creating a
watermark.

Digital Documentation Class 10 Notes using LibreOffice Writer

2. Cropping Images :
When you are only interested in a section of the image for the purpose of your
document, you may wish to crop (cut off) parts of it. To start cropping the image,
right click on it and select Picture from the pop-up menu. In the Picture dialog box,
select the Crop page

In the Crop page, you can control the following parameters:

6/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Keep scale / Keep image size : When Keep scale is selected (default), cropping the
image does not change the scale of the picture. When Keep image size is selected,
cropping produces enlargement , shrinking , or distortion of the image so that the
image size remains constant.

3. Resizing Image :

Steps to resize the image in Writer are –

1. Click the picture, to show the green resizing handles.

2. Position the pointer over one of the green resizing handles.
3. Click and drag to resize the picture.

Rotating a Picture : Writer does not provide a tool for rotating a picture; however,
there is a simple workaround:

1. Open a new Draw or Impress document.

2. Insert the image you want to rotate.
3. Select the image and select the Rotate icon from the Drawing toolbar.
4. Rotate the image as desired.
5. Select and Copy the rotated image and paste it in Writer document.

Creating Drawing Objects :

We can draw the object using drawing toolbar by clicking View > Toolbars >
Drawing. Steps to To use a drawing tool are :

1. Click in the document where you want to insert the object.

2. Select the tool from the Drawing toolbar.
3. Click and drag to create the drawing object.

After inserting the object You can change the properties (fill color, line type and
weight, anchoring, and others) of the drawing object using the Drawing Object
Properties toolbar.

Grouping Drawing Objects :

Steps to group drawing objects are :

1. Select one object, then hold down the Shift key and select the others you
want to include in the group.
2. Choose Format > Group > Group from the menu bar or right-click and choose
Group > Group from the pop-up menu.

Positioning Image/Graphics Within The Text :

7/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

When you add a graphic to a text document, you need to choose how to position it
with respect to the text and other graphics. Positioning of a graphic is controlled
by four settings

1 Arrangement refers to the placement of a graphic on an imaginary vertical axis.

2. Alignment refers to the vertical or horizontal placement of a graphic in relation to

the chosen anchor point.

3. Anchoring refers to the reference point for the graphics. This point could be the
page, or frame. An image always has an anchor point.

4. Text wrapping refers to the relation of graphics to the surrounding text, which
may wrap around the graphic on one or both sides.

Digital Documentation Class 10 Notes using LibreOffice Writer

QUESTIONS based on Digital Documentation Class 10 Notes

Q1. Explain any four Graphic filters.

Q2. Explain Image Cropping

Q3. List any three methods of inserting images in a text document.

Q4. What do you understand by the terms:

a. Text Wrapping
b. Anchoring

Click here for Answers of above Questions————————— Click here for more
Questions and Answers

Digital Documentation Class 10 Notes using LibreOffice Writer

SESSION : 3 CREATE AND USE TEMPLATE

A template is a model that you use to create other documents. For example, you
can create a template for business reports that has your company’s logo on the
first page. New documents created from this template will all have your company’s
logo on the first page.

Creating a Template :

8/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Template can be created in two ways :

1. Creating a template from a Document : Steps to create template from a

document are –

a) Open a new or existing document of the type you want to make into a template
(text document, spreadsheet, drawing, presentation).

b) Add the content and styles that you want.

c) From the main menu, choose File > Templates > Save , to open template dialog
box.

d) Type a name for the new template.

e) Select the category in which you want to assign the template.

f) Click OK to save the template.

2. Creating a template using a wizard: Steps to create template using a

wizard are –
a) From the main menu, choose File > Wizards >[type of template required]

b) Follow the instructions on the pages of the wizard.

c) In the last section of the wizard, you can specify the name and location for
saving the template.

Setting a custom template as the default

To set a custom template as the default:

1. From the main menu, choose File > Templates > Organize. The Template
Management dialog opens.
2. In the box on the left, select the folder containing the template that you want
to set as the default, then select the template.
3. Click the Commands button and choose Set As Default Template from the
drop-down menu.

Resetting the default template

To re-enable Open Office’s Default template for a document type as the default:

1. In the Template Management dialog, click any folder in the box on the left.
2. Click the Commands button and choose Reset Default Template from the
drop-down menu.

9/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

QUESTIONS based on Digital Documentation Class 10 Notes

Q1. What are templates? What are the advantages of using templates?.

Q2.What is the difference between styles and templates?

Q3. Explain different ways of creating a template.

Click here for Answers of above Questions————————— Click here for more
Questions and Answers

SESSION 4. CREATE AND CUSTOMIZE TABLE OF CONTENTS

Creating a Table of Contents

Writer’s table of contents feature lets you build an automated table of contents
from the headings in your document. For example, you can use the Heading 1 style
for chapter titles and the Heading 2 and Heading 3 styles for chapter subheadings.

Steps to create Table of Content are :

1. Place the cursor in the document where you want the table of contents to be
inserted.
2. Select Insert > Indexes and Tables > Indexes and Tables
3. Click OK.

10/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Digital Documentation Class 10 Notes

Using the Index/Table tab :

Use the Index/Table tab to set the table’s attributes like

Adding A Title : If you’d like the table of contents to have a title, enter it in the Title
field.

Protecting Against Manual Changes : To protect the table of contents from being
changed accidentally, check the Protected against manual changes check box.

Changing The Number Of Levels : By default, Writer evaluates 10 levels of

headings. To change the number of levels evaluated, enter the desired number in
the Evaluate up to level spin box

Using The Entries Tab

Use the Entries tab, to format the entries in the table of contents. For each outline
level, you can add and delete elements, such as chapter numbers, and you can
also apply character styles to individual elements.

The Structure line displays the elements for entries in that level. Each button on the
Structure line represents one element:

1. The E# button represents the chapter number.

2. The E button represents the entry text.

11/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

3. The T button represents a tab stop.

4. The # button represents the page number.
5. The LS button represents the start of a hyperlink. (This button doesn’t appear
on the default Structure line.)
6. The LE button represents the end of a hyperlink. (This button doesn’t appear
on the default Structure line.)

Deleting Elements : To delete an element from the Structure line, click the button
that represents that element and then press the Delete key on your keyboard.

Adding Elements : To add an element to the Structure line, follow these steps:

1. Place your cursor in the white field to the left of where you want to insert the
element.
2. Click one of the five buttons that are just below the Structure line. (For
example, to add a tab stop, click the Tab stop button.) A button representing
the new element appears on the Structure line.

Applying Character Styles : To apply a character style to an element on the

Structure line:

1. On the Structure line, click the button that represents the element to which
you want to apply a style.
2. From the Character Style drop-down list, select the desired style. Writer
applies the selected style to the selected element.

Using The Styles Tab :

Use the Styles tab, to apply paragraph styles to the table of contents. You can
apply a different paragraph style to each outline level of the table.

To apply a paragraph style to an outline level, follow these steps:

1. In the Levels list box, select the desired outline level.

2. Click the paragraph style that you want to apply.

3. Click the < button to apply the selected paragraph style to the selected outline
level.

To remove paragraph styling from an outline level:

1) In the Levels list box, select the desired outline level by clicking it.

2) Click the Default button.

Using The Background Tab :

Use the Background tab, to add color or a graphic to the table background.

12/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

Adding Color : To add color to the background of the table of contents, simply click
the desired color in the color grid.

Adding A Graphic : To add a graphic to the background of the table of contents,

follow these steps:

1. From the As drop-down list, select Graphic. The Background tab displays the
graphics options.
2. Click the Browse button.
3. Find the graphic file that you want to use and then click the Open button.
4. In the Type area of the Background tab, choose how you want the background
graphic to appear:
To position the graphic in a specific location in the background, select
Position.
To stretch the graphic so that it fills the entire background area, select
Area.
To repeat the graphic across the entire background area, select Tile

Deleting Color Or Graphics : To delete color or graphics from the table background,
follow these steps:

1. From the As drop-down list, select Color.

2. Click No Fill on the color grid.

Editing A Table Of Contents :

To edit an existing table of contents:

1. Click anywhere in the table of contents and then right click. The context menu
appears.
2. From the context menu, choose Edit Index/Table. The Insert Index/Table
window opens and you can edit and save the table.

Update Table of Content :

If you add or delete text (so that headings move to different pages) or you add,
delete, or change headings, you need to update the table of contents. To do this

1. Place the cursor within the table of contents.

2. Right-click and select Update Index/Table from the pop-up menu.

Deleting A Table Of Contents ::

To delete the table of contents from a document:

1. Click anywhere in the table of contents and then right click. The context menu
appears.

13/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

2. From the context menu, choose Delete Index/Table. Writer deletes the table of
contents.

SESSION 5. IMPLEMENT MAIL MERGE

A mail merge is a way to take a letter you’ve written and send it to a whole bunch of
people, personalizing it with information about them so they might think that you
typed that letter personally for them.

A mail merge can also be a quick way to take a list of people’s mailing addresses
and generate labels or envelopes with the address for a different person on each
label or envelope.

Create a Mail Merge Document: Letter

1. Open a template, or create a new Writer document.

2. Save the document with the appropriate name with extension .odt or .ods

3. Write out the text that will be going to everyone, and plan where you want the
fields.

To Make The Data Source And Entering Data

1. Choose File > New > Database

2. Select the type of data: spreadsheet data, text file data or the type of database
you’re using like Access or mySQL.

3. Click Next

Merging The Data Source With Main Document

1. Open the letter you want to use.

2. Once you have the letter then insert the fields from the database at specific
position by dragging the fields.

3. If you want a field in the letter twice, you can drag it twice.

4. Format the document any way you want it.

5. The last step is to either print the letter to a printer, or “print” to a Writer file so
you can see all the data merged.

Editing a saved file of mailing labels

14/15
Downloaded by SANJNA MISHRA ([email protected])
 lOMoARcPSD|49777476

To edit a saved file of mailing labels, open the saved label file in the normal way.
You will be prompted to update all links. Choose No for the following reason: The
first label on the page is termed the “Master Label” and all other labels are linked
to it. If you update the links, then all labels will end up containing the same data.

Digital Documentation Class 10 Notes using LibreOffice Writer

Printing Mailing Labels

Before beginning this process, note the brand and type of labels you intend to use.
To prepare mailing labels for printing:

1. Choose File > New > Labels.

2. On the Options tab, ensure that the Synchronize contents option is selected.

3. Select Database, Table, label Brand, and label Type

4. Click the Labels tab and move fields from Database field list to Label text area.

5. Choose File > Print. The message shown in appears. Click Yes to print.

6. In the Mail Merge dialog ( ), Click OK to send the labels directly to the printer

QUESTIONS based on Digital Documentation Class 10 Notes

Q1. Explain Mail Merge

Q2.What are advantages of Mail Merge?

Q3. Give examples of databases in which the Data Source can be created.

Click here for Answers of above Questions————————— Click here for more
Questions and Answers

15/15
Downloaded by SANJNA MISHRA ([email protected])