Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    AquaArm 2C-P-Ver 6

    Uploaded by

    Ketaki Hallur
    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AquaArm 2C-P-Ver 6

    Uploaded by

    Ketaki Hallur
    6 views3 pages
    TDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views3 pages

    AquaArm 2C-P-Ver 6

    Uploaded by

    Ketaki Hallur
    TDS

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    W aterproofing Systems

    AquaArm 2C-P
    High Performance Flexible Acrylic Polymer
    Modified Cementitious Coating
    TECHNICAL DATA SHEET

    Product Description

    AquaArm 2C-P is a two component cementitious coating system for waterproofing of wet areas and any water
    retaining structures such as swimming pools and water features.
    It conforms to Class II requirement as per AS/NZS 4858.

    Uses Features and Benefits

     Any concrete, cement or masonry surface that are  Seamless, Breathable membrane.
    subject to moisture ingress.  Elastomeric.
     Swimming pools, water features and water tanks.  High film build-up.
     Bathrooms, toilets, balconies, planters etc.  Excellent adhesion to concrete and masonry substrates.
     Low VOC.
     Easily applied by brush, roller or trowel.
     Can be applied on damp surfaces.
     Water potability.

    Application Methodology

    Step no 1: Surface Preparation Step no. 3: Product Application


     AquaArm 2C-P slurry by brush, roller or trowel.
     The substrate must be sound, clean and free from
     Allow the first coat to dry completely for 6 – 8 hours
    dirt, oil and loose material. before applying the second coat.
     Masonry surfaces should be fully cured (minimum  Apply second coat at right angles to the first coat.
    28 days) prior to application.
     All surface cracks, undulations and voids must be
    repaired before application using a suitable MYKA
    repair material.
     Substrates must be Saturated surface dry (SSD)
    prior to application.

    Step no. 2: Mixing Instructions

     Using a slow speed mechanical mixer and a clean


    suitable mixing vessel, slowly add the powder
    component to the liquid polymer and stir until
    smooth and homogenous slurry, is achieved.
     Allow the mixed slurry to stand for 5–10 minutes
    before use.
     Do not dilute with water.

    Ver/6/Jan 2022 1 of 3
    W aterproofing Systems

    PC001WP

    AquaArm 2C-P
    High Performance Flexible Acrylic Polymer
    Modified Cementitious Coating
    TECHNICAL DATA SHEET

    Technical Data Consumption


    2
    Approximately 0.5-0.55 m /kg in 2 coats at approx
    PROPERTIES RESULTS 1.2mm DFT.
    Mix ratio (liquid: Powder), parts
    Coverage may vary depending upon the nature and
    1:1.4 texture of the substrate
    by wt.
    Surface dry time, minutes
    45
    (ASTM D 1640)
    Packaging
    Coverage may vary depending upon the nature and texture of the
    pH > 10 substrate

    Inter coat application time, Hrs 6-8 Available in 25 kg Composite Pack


    nd
    Cure time after 2 coat, days 7
    Hardness, Shore A Storage and Shelf Life
    60
    (ASTM D 2240)
    2
    Tensile strength, N/mm
    0.9 Shelf life is 12 months from the date of manufacturing if
    (ASTM D 412)
    Elongation at break, % stored in original and unopened packaging in a cool dry
    120 minimum place away from direct sunlight.
    (ASTM D 412)
    2
    Adhesion strength, N/mm
    0.8 minimum
    (ASTM D 4541)
    Precautions & Limitations
    Crack bridging No cracking up to
    (ASTM C 836) 2 mm
    Water penetration
    Pass  Do not add water to AquaArm 2C-P during application.
    (5 bar pressure)( DIN1048)
     AquaArm 2C-P needs at least 3 days for water or
    moisture curing. Cure with help of moist hessian cloth.
     Concrete & masonry surfaces must be cured for 28
    days before application.
     Overlay of a cementitious screed must be done with 7
    days hrs after completion of coating. If applied in wet
    areas & bathrooms.

    Verified on: 07.03.18


    Ver/6/Jan 2022 2 of 3
    W aterproofing System

    AquaArm 2C-P
    High Performance Flexible Acrylic Polymer Modified
    Cementitious Coating

    Health & Safety Product Categories Available

    This product is a water based emulsion of non hazardous


    polymer. It is non flammable and essentially non toxic.
    Normal industrial hygiene procedures should be adhered to
    particularly when spraying and it is recommended that
    gloves and eye protection be worn. In case of skin or eye
    contact thoroughly irrigate with water and seek medical
    advice if any irritation develops or persists. In the case of
    accidental ingestion, wash mouth out with water and seek
    medical attention. Spillages should be cleaned up
    immediately with water as they will leave a film on
    evaporation. See MSDS for further information.

    Legal Note
    The information, and, in particular, the recommendations relating to the application and end-use of MYK Arment products, are given in good
    faith based on MYK Arment current knowledge and experience of the products when properly stored, handled and applied under normal
    conditions in accordance with MYK Arment’s recommendations. In practice, the difference in materials, substrates and actual site conditions
    are such that no warranty in respect of merchant ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship
    whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of
    the product must test the product's suitability for the intended application & purpose. MYK Arment reserves the right to change the properties of
    its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery.
    Users must always refer to the most recent issue of the local product data sheet for the product concerned, copies of which will be supplied on
    request.

    MYK Arment Private Limited


    8-2-703/A, 3rd Floor, Leela Gopal Towers, Road No. 12, Banjara Hills, Hyderabad -500 034
    Tel: +91 40 6816 0001 | Email: [email protected] | www.mykarment.com

    Ver/6/Jan 2022 3 of 3

    You might also like