RT300 SERIES

STANDARD UPPERSTRUCTURE EQUIPMENT

UPPERSTRUCTURE FRAME windshield to provide optimized visibility of the load open or
All welded one-piece structure fabricated with high tensile closed. Acoustical foam padding insulates against sound and
strength alloy steel. Counterweight is removable. weather. The deluxe six-way adjustable operator’s seat is
equipped with a torsion bar suspension and includes head
TURNTABLE CONNECTION and arm rests.
Swing bearing is a single row, ball type, with external teeth. CONTROLS
The swing bearing is bolted to both the revolving upperstruc-
All control levers and pedals are positioned for efficient oper-
ture and the carrier.
ation. Hand operated control levers include swing, boom
SWING telescope, boom hoist, winch(s), shift, vernier adjustable
A hydraulic motor drives a double planetary reduction gear hand throttle, and 360° house lock. Switches include igni-
for precise and smooth swing function. Swing speed (no load) tion, engine stop, steering mode, parking brake, two speed
is 2.8 rpm. winch, and outrigger controls. Foot control pedals
include swing brake, boom raise, boom lower, service
SWING BRAKE brakes and accelerator.
Heavy duty multiple disc swing brake is mechanically actuat- INSTRUMENTATION AND ACCESSORIES
ed from operator's cab by foot pedal. Brake may be locked
In-cab gauges include air pressure, bubble level, engine oil
on or used as a momentary brake.
pressure, fuel, engine coolant temperature, voltmeter, trans-
RATED CAPACITY INDICATOR mission temperature, transmission charge pump pressure.
Rated Capacity Indicator with visual and audible warning sys- Indicators include low air, high coolant temperature/low
tem and automatic function disconnects. Second generation engine oil pressure/high transmission temperature
pictographic display includes: boom radius, boom angle, audio/visual warning, low coolant audio/visual warning, hoist
boom length, allowable load, actual load, and percentage of drum rotation indicator, Rated Capacity Indicator and rear axle
allowable load registered by bar graph. Operator settable centered. Accessories include fire extinguisher; light package
alarms provided for swing angle, boom length, boom angle, including headlights, tail light, brake lights, directional signals,
tip height, and work area exclusion zone. Anti-two block sys- four-way hazard flashers, dome & dash lights, and back-up
tem includes audio/visual warning and automatic function dis- lights with audible back-up alarm; windshield washer/wiper;
connects. skylight wiper; R.H. and L.H. rear view mirrors; and seat belt.

OPERATOR’S CAB HYDRAULIC CONTROL VALVES

Valves are mounted in the rear of the upperstructure and are
Environmental cab with all steel construction, optimized visi-
easily accessible. Valves are mechanically operated and
bility, tinted safety glass throughout, and rubber floor matting
include one three spool valve for boom elevation, telescope,
is mounted on vibration absorbing pads. The cab has a slid-
and main winch; and one single spool valve for swing. High
ing door on the left side, framed sliding window on the right
pressure regeneration feature provides 2-speed boom exten-
side, hinged tinted all glass skylight and removable front
sion. Quick disconnects are provided for quick connection of
pressure check gauges.

OPTIONAL EQUIPMENT
Auxiliary Winch • Heater/Defroster • Air Conditioner • Work
Lights • Revolving Amber Light • Independent Rear Wheel
Steering • Roof Mounted Spotlight

STANDARD CARRIER EQUIPMENT

CARRIER CHASSIS STEERING
High strength chassis with four-wheel drive and four-wheel Hydraulic four-wheel power steering for two-wheel, four-
steer (4x4x4). Has box beam type construction with reinforc- wheel, or crab steer is easily controlled by steering wheel.
ing cross members, a precision machined turn table mounting
Turning radius to center of outside tire.
plate and integrally welded outrigger boxes. Decking has
anti-skid surfaces, including tool storage compartment, and 23.5R25 tires 21.00x25 tires
access steps and handles left and right side and front and Two-wheel: 36' 10.75" (11.25 m) 36' 8.7" (11.19 m)
rear corners. Four-wheel: 20' 4.7" (6.22 m) 20' 2.6" (6.16 m)

AXLES AND SUSPENSION TRANSMISSION

Rear axle is a planetary drive/steer type with automatic oscil- Full power-shift transmission with integral torque converter
lation lockouts that engage when the superstructure is swung has neutral safety start, 6 speeds forward, and 3 speeds
10° in either direction. Front axle is a planetary drive/steer reverse. Automatic pulsating back-up alarm.
type, rigid mounted to the frame for increased stability.
STANDARD CARRIER EQUIPMENT (continued)
MULTI-POSITION OUT & DOWN OUTRIGGERS SERVICE BRAKES
Fully independent hydraulic outriggers may be utilized fully Cam operated air brakes on all four wheels; 20 1 / 4 " x 4"
extended to 22 ft. (6.71 m), in their 1/2 extended position, or fully (51.43x10.2 cm) drum brakes.
retracted. Easily removable floats, each with an area of 254 in2
(1639 cm2), stow on the carrier frame. Complete controls and PARKING BRAKE
sight leveling bubble are located in the operator's cab. Front and rear axles equipped with spring-set, air released
emergency/parking chambers.
WHEELS & TIRES
Disc type wheels with full tapered bead seat rim. 150.50 in OPTIONAL EQUIPMENT
(3.82 m) wheelbase. Cold Weather Starting Aid • Immersion Heater • 24" (0.61m)
Aluminum Outrigger Floats • Pintle Hook • Clearance Lights •
TIRES Front Mounted Winch – 20,000 lbs (9072 kg)
23.5R25** std.
21.00x25 28 PR opt.

HYDRAULIC SYSTEM
HYDRAULIC PUMPS FILTRATION
Three gear type pumps, one single and two in tandem, driven Full flow oil filtration system with bypass protection includes a
off the transmission. Combined system capability is 119 gpm removable 60 mesh (250 micron) suction screen-type filter
(450 lpm). Includes pump disconnect. and 5 micron replaceable return line filter.
Main and Auxiliary Winch Pump HYDRAULIC RESERVOIR
59.5 gpm (225.2 lpm) @ 3,500 psi (246.1 kg/cm2)
All steel, welded construction with internal baffles and diffuser.
Boom Hoist, Telescope Pump Provides easy access to filters and is equipped with an exter-
38.5 gpm (145.7 lpm) @ 3,500 psi (246.1 kg/cm2) nal sight level gauge. The hydraulic tank is pressurized to aid
Power Steering, Outrigger and Swing Pump in keeping out contaminants and in reducing potential pump
21 gpm (79.5 lpm) @ 2,500 psi (175 kg/cm2) cavitation. Capacity is 114 gal (432 liters). Hydraulic oil cooler
is standard.

MAIN WINCH SPECIFICATION OPTIONAL AUX. WINCH

Hydraulic winch with bent axis piston motor and planetary reduction gearing pro- Hydraulic 2-speed winch with bent axis pis-
vides 2-speed operation with equal speeds for power up and down. Winch is ton motor, power up and down, equal
equipped with an integral automatic brake, grooved drum, tapered flanges, stan- speed, planetary reduction with integral
dard cable roller on drum, and electronic rotation indicator. automatic brake, grooved drum with tapered
PERFORMANCE LO-RANGE HI-RANGE flanges, drum roller, and rotation indicator.
Max. line speed (no load)
First layer 184 fpm (56.1 m/min) 369 fpm (112.5 m/min) PERFORMANCE
Fifth layer 266 fpm (81.1 m/min) 533 fpm (162.5 m/min) (Same as main winch)
Max. line pull-first layer 15,639 lbs (7094 kg) 7,298 lbs (3310 kg)
Max. line pull-fifth layer 10,827 lbs (4911 kg) 5,052 lbs (2292 kg) DRUM DIMENSIONS AND CAPACITY
Permissible line pull 9,000 lbs (4082 kg) (Same as main winch)
DRUM DIMENSIONS DRUM CAPACITY
10.62 in (270 mm) drum diameter Max. Storage: 570 ft (173.7 m)
OPTIONAL HOIST LINE – MAIN WINCH
17.55 in (446 mm) length 6th layer not a working layer
AND OPTIONAL AUXILIARY WINCH –
18.0 in (457 mm) flange dia. Max. Useable: 455 ft (138.7 m)*
5/8 in. (16mm) rotation resistant compacted
Cable: 5/8 in. x 450 ft (16 mm x 137.2 m)
Cable type: 5/8 in. (16mm) 6x19 IWRC * Based on min. flange height above strand 18 x 19 or 19 x 19.
XIPS right regular lay, preformed top layer to comply with ANSI B30.5 Min. breaking strength 22.6 tons (20.6 mt).

ENGINE SPECIFICATIONS PERFORMANCE (Standard Engine)

Trans- Maximum Grade-
Make and Model Cummins 6BT5.9 (Std.) Caterpillar 3116 DITA (Opt.) mission Forward Maximum Tractive ability
Gear Drive Speed Effort @ Stall*
Type 6 cylinder 6 cylinder
1 4-wheel 2.3 mph 56,357 lbs 273.7%
Bore and Stroke 4.02 x 4.72 in (102x120 mm) 4.12 x 5.0 in (105x127mm) 3.7 km/h 25 564 kg
Displacement 359 cu in (5.9 l) 402 cu in (6.6 l) 2 4-wheel 4.1 mph 31,890 lbs 59.5%
Gross Horsepower 152 @ 2,500 rpm 175 @ 2,400 rpm 6.6 km/h 14 465 kg
Gross Torque 414 lb•ft(561 N•m) @ 1600 rpm 490 lb•ft(664 N•m) @ 1450 rpm 3 4-wheel 5.4 mph 24,261 lbs 41.6%
8.7 km/h 11 005 kg
Aspiration turbocharged turbocharged & aftercooled
4 2-wheel 9.6 mph 13,746 lbs 21.4%
Air Filter dry type dry type 15.4 km/h 6235 kg
Electrical System 12 volt 12 volt 5 2-wheel 13.6 mph 9,691 lbs 14.3%
Alternator 102 amp 115 amp 21.9 km/h 4396 kg
Battery (2) 12V-1600 CCA (2) 12V-1600 CCA 6 2-wheel 24.0 mph 5,498 lbs 7.2%
38.6 km/h 2494 kg
Fuel Capacity 50 gal (189 l) 50 gal (189 l)
*Based on a gross vehicle weight of 60,000 lbs. (27 216 kg).
TEREX Cranes
106 12th Street S.E.
Waverly, IA 50677-9466 USA
TEL: +1 (319) 352-3920
FAX: +1 (319) 352-5727
EMAIL: [email protected]
WEB: terex.com