0% found this document useful (0 votes)
15 views46 pages

BOQJNV66 A

Uploaded by

8ydzpsvf8j
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
15 views46 pages

BOQJNV66 A

Uploaded by

8ydzpsvf8j
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 46

Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)


SUMMARY OF PROJECT COST
Amount DSR-2023 Amount DSR Amount NON DSR Cost of Work (DSR-2023
Sr.No Description of Item
(In ₹) 2022+GST 5.36% (In ₹) +DSR-2022+NS)

1 Construction MP Hall
a Civil Work 2,68,63,891 - 22,10,332 2,90,74,223
b Plumbing Work 6,13,336 7,770 2,51,333 8,72,439
c Electrical Work 21,840 12,37,928 8,14,861 20,74,629
d Fire Fighting Work - 6,59,428 2,72,329 9,31,757
e Fire Alarm Work - 59,788 87,288 1,47,076
l Sound System - - 6,00,000 6,00,000
m Line Marking for Sports - - 1,00,000 1,00,000
Total (A) 2,74,99,067 19,64,914 43,36,143 3,38,00,124
2 Cost of Development Works
a CC Road 96,204 - - 96,204
b Pathway 2,17,923 - - 2,17,923
c External Water Supply 37,641 - 40,000 77,641
d Apron Drain 2,76,122 - - 2,76,122
e External Sewerage Lines 3,96,599 - - 3,96,599
f External Electrification -
1-Earthing & Miscellaneous items - 68,431 16,000 84,431
2-Supply & Laying of Cable - 14,601 36,495 51,096
3-External Lights - - 70,537 70,537
Total (B) 10,24,488 83,032 1,63,033 12,70,553
Total (A+B) 3,50,70,677

1 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Civil)
[ MULTIPURPOSE HALL]
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
A Earth Work -
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
1 2.80 dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the -
excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2 2.8.1 .All kinds of soil. CUM 244.510 260.30 - 63,645.95


Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
3 2.25 etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming CUM 36.680 196.00 - 7,189.28
and watering, lead upto 50 m and lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including watering,
4 2.27 CUM 201.090 2123.75 - 4,27,064.89
ramming,consolidating and dressing complete.
Excavating, supplying and filling of local earth (including royalty) by mechanical transport
5 2.25a upto a lead of 5km also including ramming and watering of the earth in layers not CUM 605.880 700.50 - 4,24,418.94
exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
6 Anti termite treatment -
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite
7 2.35 -
treatment (excluding the cost of chemical emulsion) :
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres /
sqm of the vertical surface of the substructure to a depth of 300mm including excavation
8 2.35.1.1 Metre 98.032 39.90 - 3,911.48
channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20%
with 1% concentration
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300
9 2.35.3 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 - -
cement : 2 Coarse sand) to match the existing floor:
10 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Sqm 491.200 310.05 - 1,52,296.56
11 Concrete Work -
Providing and laying in position cement concrete of specified grade excluding the cost of
centering and shuttering - All work up to plinth level 1:5:10 (1 Cement : 5 coarse sand
12 4.1.10 (zone-III) derived from CUM 123.720 6518.60 - 8,06,481.19
natural sources : 10 graded stone aggregate 40 mm
nominal size derived from natural sources)
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1
13 4.10 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate SQM 61.230 410.85 - 25,156.35
12.5mm nominal size derived from natural sources)
Extra for providing and mixing water proofing material in cement concrete work in doses
14 4.12 per 50kg cement 16.000 18.15 - 290.40
by weight of cement as per manufacturer's specification.
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved
quality using 1.7kg per square metre on damp proof course after cleaning the surface with
15 4.13 SQM 61.230 146.15 - 8,948.76
brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand
(zone-III) derived from natural sources : 6 graded stone
aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry
16 4.17 SQM 127.940 749.30 - 95,865.44
brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine
sand,including necessary excavation,levelling & dressing & finishing the top smooth.

2 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Brick edging in full brick width and half brick depth including excavation, refilling and
17 16.7.1 disposal of surplus earth lead upto 50 metres. RM 170.580 179.50 - 30,619.11
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18 Reinforced Cement Concrete -
Centering and shuttering including strutting, propping etc. and removal of form for all
19 -
heights :
20 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. SQM 180.930 392.15 - 70,951.70
21 5.9.3 Suspended floors, roofs, landings, balconies and access platform. SQM 835.540 927.25 - 7,74,754.47
22 5.9.5 Lintels, beams, plinth beams, girders, bressumers RM 1433.803 736.40 - 10,55,852.53
23 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts. SQM 717.430 931.30 - 6,68,142.56
24 5.9.16.1 Edges of slabs and breaks in floors and walls Under 20 cm wide. SQM 247.690 208.55 - 51,655.75
Extra for additional height in centering, shuttering where ever required with adequate
bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a
25 5.11.1 height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be SQM 515.160 384.30 - 1,97,975.99
measured).
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
26 5.22.6 position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of KG 15620.000 107.85 - 16,84,617.00
grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
27 5.22.A.6 position and binding all complete above plinth level. Thermo-Mechanically Treated bars of KG 27724.900 107.85 - 29,90,130.47
grade Fe-500 D or more.
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
28 5.30 RM 664.020 78.40 - 52,059.17

Providing and laying in position ready mixed or site batched design mix cement concrete
for reinforced cement concrete work; using coarse aggregate and fine aggregate derived
from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,
admixtures in
recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to
improve durability and workability without impairing strength; including pumping of
concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering,
29 5.33 -
shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the
following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix
shall be payable separately. In case the cement content in design mix is more than 110% of
the specified minimum cement content, the contractor shall have discretion to either re-
design the mix
or bear the cost of extra cement.
30 5.33.1 All works upto plinth level -
31 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum -
32 5.33.1.1 (i) R.C.C. work in Footing CUM 92.780 9504.75 - 8,81,850.71
33 5.33.1.1 (ii) R.C.C. work in Beam CUM 42.710 9504.75 - 4,05,947.87
34 5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum -
35 5.33.1.2 (iii) R.C.C. work in Columns CUM 20.710 9655.70 - 1,99,969.55
36 5.33.2 All works above plinth level upto floor V level -
37 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum -
38 5.33.2.1 (i) R.C.C. work in Lintel CUM 5.060 9860.40 - 49,893.62
39 5.33.2.1 (ii) R.C.C. work in Beam CUM 93.035 9860.40 - 9,17,362.31
40 5.33.2.1 (iv) R.C.C. work in Slab CUM 124.830 9860.40 - 12,30,873.73
41 5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum -

3 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
42 5.33.2.2 (iii) R.C.C. work in Columns CUM 54.324 10011.35 - 5,43,856.58
43 Masonry Work -
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class
44 6.13.2 designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 Sqm 171.570 1123.80 - 1,92,810.37
(1 cement :4 coarse sand)
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course
45 6.15 SQM 171.570 104.80 - 17,980.54
of half brick masonry.
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10
46 6.34.2 average compressive strength in superstructure above plinth level up to floor V level in : CUM 313.620 8752.55 - 27,44,974.73
Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class
47 6.1.2 designation 7.5 in foundation and plinth in: CUM 104.880 7311.25 - 7,66,803.90
Cement mortar 1:6 (1 cement : 6 coarse sand)
48 Stone Work -
Random rubble masonry with hard stone in foundation and plinth including levelling up
49 7.1 with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm - -
nominal size) upto plinth level with :
50 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 46.93 7311.25 - 3,43,116.96
51 Cladding Work -
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and
similar locations of required size, approved shade, colour and texture laid over 20 mm
52 -
thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and
polishing to edges to give high gloss finish etc. complete at all levels.
53 8.2.2.1 Area of slab upto 0.50 sqm SQM 1.10 5413.50 - 5,954.85
54 8.2.2.2 Area of slab over 0.50 sqm SQM 18.64 5136.30 - 95,740.63
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including
55 machine polishing to edge to give high gloss finish etc. complete as per design approved by -
Engineer-in-Charge.
56 8.3.2 Granite work RM 66.00 510.95 - 33,722.70
Extra for fixing marble /granite stone over and above corresponding basic item, in facia
57 8.4 and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. RM 66.00 568.55 - 37,524.30
complete.
Extra for providing opening of required size & shape for wash basins/ kitchen sink in
kitchen platform, vanity counters and similar location in marble/Granite/stone work
58 8.5 EACH 8.00 9787.00 - 78,296.00
including necessary holes for pillar taps etc. including moulding, rubbing and polishing of
cut edges etc. complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness
to be specified by the manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,
59 8.31 risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse SQM 268.670 1267.95 - 3,40,660.13
sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white
cement mixed with pigment of matching shade complete.
(Size-300x450 )

4 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass
substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as
per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium,
Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84.
The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm
(Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient
readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM
C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers
(supplied by the manufacturer) or by using construction adhesives (as per the instructions
60 MR laid down by the manufacturer). The fibre glass substrate shall have a recycle content of sqm 0.00 11192.00 - -
85%. Properties of Tile Relevant Standards Base Material Fibre Glass
Panel Dimensions 600mm x 600/1200mm Panel Thickness 25mm
Panel Finish Acoustically transparent fabric as per the approved shade (Husk,
Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell).
Fire Properties Class A ASTM E-84
Noise Reduction Co-efficient 0.85 ASTM C423 (Average value of Absorption Coefficient
readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz)

Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound
binding agent) bonded woodwool Panel planks of 600Mm*1200Mm *25Mm thickness
made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water &
Magnesite (No-Cement) with open & smooth surface texture. A Completly harmless
Envirenment & Human Friendly & also a disposable or recyclable Material & can last for
long span in building interiors As it has long lifespan & suitable for Indoor conditions with
relative air humidity of upto 90%. Magnesite protects the wood cells against ageing &
fungal attack. To achive upto NRC=1.00 it should be a clear gap of 200Mm from wall slab
61 MR along with the backing of Mineral of 50kg/m3. Edge Detail : AK 01 sqm 0.00 10800.00 - -
Heradesign Woodwool - Acoustical Wall Mounting System Solutions- Ecologically Sound
Material with high mechanical strength with Crash test of 90Km/H with Ball Impact Test
DIN18032 & EN13964 with flying colors & A sustainable material (PEFC & FSC Certified)
along with EPD Certified Acc. to EN ISO 14025 (AUB-Environmental Product declaration).

62 Wood and PVC Work - -


Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory windows (Area of opening
63 9.7 for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for -
panelled or panelled and glazed shutters 25 mm to 40 mm thick :

64 9.7.7 Float glass panes -


65 9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). SQM 33.150 2600.45 - 86,204.92
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90
mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm
thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester
66 9.121 resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with RM 76.050 570.95 - 43,420.75
suitable wooden block in all the three legs. The frame shall be covered with fiber glass
from all sides. M.S. stay shall be provided at the bottom to steady
the frame.

5 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door
shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3
mm thick FRP laminate all around, with suitable wooden
blocks inside at required places for fixing of fittings and
67 9.122.2 SQM 24.860 4488.95 - 1,11,595.30
polyurethane foam (PUF)/Polystyrene foam to be used as
filler material throughout the hollow panel, casted
monolithically with testing parameters of F.R.P. laminate
conforming to table - 3 of IS: 14856, complete as per direction
of Engineer-in-charge.
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed
glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever
required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel
section made from roll forming process of required length (shape & size according to uPVC
profile), uPVC extruded glazing beads of appropriate dimension, EPDM
gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels
along with zinc plated mild steel multi point lockinghaving transmission gear, cylinder with
keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and
necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion
welded at all corners, mullion (if required) shall be also fusion welded including drilling of
68 9.147C holes for fixing hardware's and drainage of -
water etc. After fixing frame the gap between frame and adjacent finished wall shall be
filled with weather proof silicon sealent over backer rod of required size and of approved
quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single /
double glass panes and silicon sealent shall be paid separately). Variation in profile
dimension
in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in
dimension i.e. in depth & width of profile shall be acceptable.

Casement door with top hung ventilator with 3D and S.S.


friction hinges (400 x 19 x 1.9 mm) made of (big series)
frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80
69 9.147C.2 SQM 33.150 10451.95 - 3,46,482.14
mm all having wall thickness of 2.3 ±. 0.2 mm and
single glazing bead / double glazing bead of appropriate
dimension.(Area of door upto 2.50 sqm)
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35
x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc
coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door
Shutters. The frame shall be filled with Mineral wool Insulation having density min
96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on
70 9.161 vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening RM 42.60 2202.90 - 93,843.54
along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for
fixing of fire rated glazed shutter . The frame shall be finished with a approved fire
resistant primer or Powder coating of not less than 30 micron in desired shade as per the
directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

6 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating
confirming to IS:3614 (Part II) or EN1634-1:1999,
tested and certified as per laboratory approved by Engineer-in-charge, with suitable
mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm
wide and bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I. sheet (zinc coating
71 9.162 SQM 30.60 12017.90 - 3,67,747.74
not less than120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³
and fixing with necessary stainless steel ball bearing hinges of size100x89x3mm of
approved make, including applying a coat of approved fire resistant primer or powder
coating not less than 30 micron etc all complete as per direction of Engineer-in-charge
(panelling to be paid for seperately).
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,
with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120
gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from
the edges and150 mm c/c , including applying a coat of approved fire resistant
primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape
of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and
as per direction of Engineer-incharge with glass of required thickness having 120 minutes
of fire resistance both integrity & radiation control (EW120) and minimum 20minutes of
72 9.164 SQM 2.16 43677.65 - 94,343.72
insulation (EI20). The manufacturer have to give test report/certification of fire glass and
the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested
in approved NABL accredited lab or by any other accreditation
body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC
17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall
not be
more than 1100x2200 mm (w x h) or 2.42 sqm.

Note: Rate of hardware items deemed to be include in above items. All Hardware required
73 as per approved shop drawing should pass European certificate "CE" of conformity / UL -
with required fire ratings.
Providing and fixing bright /matt finished Stainless Steel handles of approved quality &
74 9.165.1 NOS 26.000 119.20 - 3,099.20
make with necessary screws etc all complete. (a) 125 mm.
Providing & fixing Stainless steel (grade SS-304 or higher) sliding door bolt/aldrop of size
75 M.R. NOS 13.000 719.00 9,347.00
250x16mm on door shutter including all accessories as per direction of E/I -
Providing and fixing Stainless steel (grade SS-304 or higher) tower bolt (barrel type) with
76 -
necessary screws etc. complete all work as per direction of E/I
77 M.R. 300 x 10mm NOS 13.000 - 448.00 5,824.00
78 M.R. 200 x 10mm NOS 13.000 - 392.00 5,096.00
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by
providing weather silicon sealant over backer rod of approved quality as per architectural
79 21.8.1 RM 299.200 96.75 - 28,947.60
drawings and direction of Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
80 Steel Work -
Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
81 10.16.1 applying a priming coat of approved steel primer, including welding and KG 2000.00 194.40 - 3,88,800.00
bolted with special shaped washers etc. complete.
Hot finished welded type tubes
Designing, Providing, installing and fixing factory finished customed
design pregalvanized high tensile steel joists manufactured from G350 Z275 confirming to
82 26.62 IS:277-1992, minimum coating of galvanizing 275 gm/sqm, minimum yield stress 35 MPa & KG 50.00 182.05 - 9,102.50
minimum tensile strength of 380 MPa placed 1.23 metre apart to support the load of slab
etc as per the design & directions of Engineer-in-Charge.

7 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
83 10.25.2 required. In gratings, frames, guard bar, ladder, railings, brackets, KG 465.15 172.60 - 80,284.89
gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c
84 10.26.1 KG 1274.570 196.80 - 2,50,835.38
fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel
bolts etc., of required size, on the top of the floor or the side of waist slab with suitable
arrangement as per approval of Engineer-in-charge.

85 Flooring -
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed
with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing
86 11.20.2 and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse SQM 96.050 1328.35 - 1,27,588.02
sand). Medium shade pigment using 50% white cement 50%
Grey cement
Marble stone flooring with 18 mm thick marble stone, as per sample
of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement
87 11.23 -
mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including
rubbing and polishing complete with :
88 11.23.2 Raj Nagar plain SQM 21.750 2346.80 - 51,042.90
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm
thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement
89 11.4 hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening SQM 731.250 978.45 - 7,15,491.56
compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications.
This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3


90 11.6 -
(1 cement : 3 coarse sand), finished with a floating coat of neat cement.
91 11.6.1 18 mm thick SQM 108.750 662.05 - 71,997.94
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300
mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red
92 11.40 SQM 85.080 1439.40 - 1,22,464.15
Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with
grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and
matching pigments etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of
approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1
93 11.41.2 SQM 97.220 1553.45 - 1,51,026.41
cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting
the joints with white cement and matching pigments etc., complete. (a) Size of Tile
600x600 mm

8 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and laying Vitrified tiles in floor in different sizes
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid
on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
94 11.41A jointing with grey cement slurry @3.3 kg/sqm including grouting -
the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only .
Laying of tiles will be done with the notch trowel, plier, wedge,
clips of required thickness, leveling system and rubber mallet for
placing the tiles gently and easily.
95 11.41A.1 Double charge vitrified tile polished finish of size -
96 11.41A.1 Size of Tile 600 x 600 mm SQM 139.776 1453.65 - 2,03,185.38
Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and onforming to I.S. 15622, of
approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of
97 11.46.2 SQM 13.290 1623.05 - 21,570.33
cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @
3.3kg/sqm including grouting the joint with white cement & matching pigments etc.
complete. Size of Tile 600x600 mm
Providing and laying flamed finish Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white
98 11.55.1 cement slurry admixed with pigment of matching shade including rubbing, curing and SQM 40.39 3186.70 - 1,28,710.81
polishing etc. all complete as specified and as
directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red,
Elite
Brown, Cat Eye or equivalent.
Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white
99 11.56.1 SQM 65.07 4481.30 - 2,91,598.19
cement slurry admixed with pigment of matching shade including rubbing, curing and
polishing etc. all complete as specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching
plant. The ready mixed concrete shall be laid and finished with screed board vibrator ,
vacuum dewatering process and finally finished by floating, brooming with wire brush etc.
100 16.75 complete as per specifications and directions of Engineer-incharge. CUM 40.17 9823.80 - 3,94,622.05
(The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/ recoverable separately).
101 ROOFING -
102 FALSE CEILING -

9 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
103 -
of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
104 at 450 mm centre, with 25mm long dry wall screws @ 230 mm -
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
105 also including the cost of making openings for light fittings, grills, -
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board
106 12.45.1 SQM 345.62 1355.80 - 4,68,597.02
conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

10 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and fixing tiled false ceiling of specified materials of size
595x595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanized steel sections ( galvanized @
120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38
mm made from 0.30 mm thick (minimum) sheet, spaced at 1200
mm center to center and cross "T" of size 24x25 mm made of 0.30
mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the
107 1200x600 mm panel to form grids of 600x600 mm and wall angle of -
size 24x24x0.3 mm and laying false ceiling tiles of approved texture
in the grid including, required cutting/making, opening for services
like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main
"T" runners to be suspended from ceiling using GI slotted cleats of
size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50
mm long dash fasteners, 4 mm GI adjustable rods with galvanised
butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm
center to center along main T, bottom exposed width of 24 mm of all
T-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed by
Engineer-in-charge.
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and
0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both
108 12.52.1 sides inclusive) and electro statically polyester powder coated of thickness 60 microns SQM 65.58 1902.95 - 1,24,795.46
(minimum), including factory painted after bending.

11 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium
silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,
suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising
@ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at
joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum)
sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33
mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre
to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28
mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x
600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a
Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick
(minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long
dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate
ceiling tiles of approved texture in the grid, including, cutting/ making opening for services
like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main
109 12.53 ‘T’ runners to be suspended from ceiling using G.I. SQM 0.00 2158.00 - -
slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm
dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with
galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at
1200 mm centre to centre along main ‘T’, bottom exposed with 24
mm of all Tsections shall be pre-painted with polyster baked paint,
for all heights, as per specifications, drawings and as directed by
Engineer-in-Charge.
Note :- Only calcium silicate false ceiling area will be measured
from wall to wall. No deduction shall be made for exposed
frames/opening (cut outs) having area less than 0.30 sqm.The
calcium silicate ceiling tile shall have NRC value of 0.50
(Minimum), light reflection > 85%, non- combustible as per B.S.
476 part IV, 100% humidity resistance and also having thermal
conductivity <0.043 w/mK.

12 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling System with 20/25mm thick
Optra Microlook 90 Edge Tiles with Sillhouette 15mm face exposed grid.
The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC
0.85 – 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz,
1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM
E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with
20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x
600mm. It shall be suitable for Green Building application, with Recycled content of
85%.
Properties of Tile Relevant Standards
Base Material Fibre Glass
Panel Dimensions 600 x 600 m (Nominal)
593 x 593 mm (Actual)
Panel Thickness 15/20 mm
Panel Weight 2.3kg/m2 (20mm)/
2.8kg/m2 (25mm)
Recycled Content 85%.
110 MR Noise Reduction Co-efficient 0.85 – 0.95 ASTM C423 (Average value of SQM 0.00 4386.00 - -
Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz)
Fire Properties Class 0/1 BS 476 Part 6/7
Light Reflectance 88% ASTM E-1477
Humidity Resistance RH 95%
Dimensional tolerances ±3mm
SUSPENSION: The tile shall be laid on Knauf Silhouette 38 profile grid system with
15mm white flanges incorporating a 6mm central reveal in white/black colour with
mitred ends & “bird’s mouth” notches to provide mitred cruciform junctions colour
global white. Grid shall have double stroke rotary stitching on all T sections i.e. the Main
Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The
deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout
mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than
L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be
made of pre hardened steel clip fixed to the ends of the cross tee to provide double
locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam
to main beam and cross tee to cross tee connection shall have a pull out strength of
more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) prepainted
111 Finishing -
12mm cement plaster in single coat on fair side of single or half brick wall for exterior
plastering up to floor two level including internal rounded angles chamfers, and/or
112 13.4.2 SQM 1289.660 343.65 - 4,43,191.66
rounded angles not exceeding 80mm in girth and finished even and smooth no extra for
mixing any additive. 1:6 (1 cement: 6 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement:
113 13.5.2 SQM 2367.850 395.35 - 9,36,129.50
6 coarse sand)
114 13.16.1 6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand) SQM 805.820 300.45 - 2,42,108.62
Finishing walls with textured exterior paint of required shade: New work (Two or more
115 13.45.1 coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer SQM 1289.660 223.60 - 2,88,367.98
applied @ 2.20kg/10 sqm
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre
and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior
116 13.48A -
paint of required shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming
117 13.48A.1 SQM 105.914 181.25 - 19,196.82
coat of exterior primer applied @ 0.90 litre/10 sqm.
118 MR Providing and fixing GRC Bricktile 15mm thickness SQM 0.00 1955.00 - -

13 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
119 13.50 Applying priming coat: -
With ready mixed red oxide zink chromate primer of approved brand and manufacture on
120 13.50.3 SQM 905.990 67.40 - 61,063.73
steel galvanised iron/steel works.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an
121 13.60 -
even shade :
122 13.60.1 Two or more coats on new work. SQM 3173.670 137.85 - 4,37,490.41
Painting with synthetic enamel paint of approved brand and manufacture to give an
123 13.61 -
even shade:
124 13.61.1 Two or more coats on new work. SQM 905.990 131.45 - 1,19,092.39
125 ALUMINIUM WORK -
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
126 21.1 -
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
127 21.1.1 For fixed portion -
Anodised aluminium (anodised transparent or dyed to required shade according to IS:
128 21.1.1.1 1868, Minimum anodic coating of grade KG 277.440 495.05 - 1,37,346.67
AC 15)
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision
129 21.1.2 for fixing of fittings wherever required including the cost -
of EPDM rubber / neoprene gasket required (Fittings
shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade according to IS:
130 21.1.2.1 1868, Minimum anodic coating of grade KG 519.820 598.60 - 3,11,164.25
AC 15)
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
131 21.3 etc. complete as per the architectural drawings and the directions of SQM 78.310 1685.40 - 1,31,983.67
engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):
With float glass panes of 8 mm thickness (weight not
132 21.3.3 -
less than 20 kg/sqm)
133 Water Proofing -

14 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and laying in situ seven course water proofing treatment
with APP (Atactic poly-propylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 litre per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting
134 of five layers prefabricated with centre core as 20 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and
14.86 finished neat (item of laying brick tiles shall be paid for separately). SQM 358.670 730.55 - 2,62,026.37
Providing and laying brick tiles over mumty roofs, grouted with cement
mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water
135 -
proofing compound by weight of cement, over 12 mm layer of cement
mortar 1:3 (1 cement : 3 fine sand) and finished neat:
With common burnt clay F.P.S. (non modular) brick tiles
136 12.19.1 SQM 358.670 607.70 -
of class designation 10 2,17,963.76
137 Roof Sheeting - -
Providing and Fixing High Quality Proflex Roof system with 1.3 mm thick Colour coated
galvalume Sheet, including vertical/ curved surface fixed with polymer coated J or L hooks,
bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled
138 MR SQM 782.17 2800.00 - 21,90,064.80
with white lead, including a coat of approved steel primer and two coats of approved paint
on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and
shape wherever - -
Providing and fixing in position, 130 mm thick factory made Expanded Polystyrene Core
(EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets
of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The
fabric mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50 mm pitch in
both the directions and on both faces of the wall and connected by GI wire of 3mm dia at
alternate row by welding. The EPS core shall consist of 60 mm thick EPS of density not less
than 16 kg/ per cum. Both the outer faces of the panel shall be finished by applying the
139 26.66 sqm 0.00 2673.70 - - -
layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than
40% stone chips of
size upto 6 mm)} with the help of shotcreting/guniting equipment etc
at a pressure not less than 1 bar (100KN/m2) and both surfaces
finished with trowel. Fixing operations of wall panels shall be completed in all respect as
per drawings and specifications and under the overall direction of the Engineer-in-charge.
-
Total 2,68,63,891 - 22,10,332

15 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Plumbing)
[ MULTIPURPOSE HALL]
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)

1 SUB HEAD -I : SANITARY FIXTURES & FITTINGS - - - -


2 - - - -
DSR -17.2.1 Providing and Fixing white viterous china pedestal type water closet ( European type WC
Pan ) with seat and lid , 10 litre low level White pvc flushing cistern , including flush pipe
with manually controlled device ( handle lever ) , Conforming to IS : 7231 with all fittings
3 - -
and fixtures complete including cutting and making good the walls and floors wherever
required . WC Pan with ISI marked white solid plastic seat and lid .
Each 13 6,515.55 - 84,702.15
4 - - -
DSR -17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.
5 brass waste of standard pattern, including painting of fittings and brackets, cutting and -
making good the walls wherever require : - -
6 - - -
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar
7 -
17.7.1 tap Each 7 2,648.85 - 18,541.95
8 - - -
9 - - -
DSR -17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved
10 quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P -
brass screws and washers complete . Each 7 1,607.95 - 11,255.65
11 - - -
17.5
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,
12 -
spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in C.P. brass, including painting of fittings and
cutting and making good the walls and floors wherever required : - -
13 17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern Each 3 22,058.25 - 66,174.75 -
14 - - -
DSR -8.10 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size
75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate
width with chase cutter and embedding the stone in the chase with epoxy grout or with
15 -
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal
size) as per direction of Engineer-in-charge and finished smooth.
- -
16 - - -
17 8.10.2 Granite Stone of approved shade Sqm 3 4,051.85 - 12,155.55 -
18 - - -
19 DSR -18.49 Providing & fixing C.P. brass bib cock of approved quality conforming to IS :8931. - - -
20 - - -
21 18.49.1 15 mm nominal bore Each 4 506.80 - 2,027.20 -
22 - - -
23 - - -
17.22A Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per
24 -
the direction of engineer in charge. Each 10 1,034.80 - 10,348.00
25 - - -

16 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
DSR -18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
26 -
quality conforming to IS:8931 - -
27 - - -
28 18.53.1 15 mm nominal bore Each 44 574.30 - 25,269.20 -
29 - - -
DSR -18.21 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush
30 -
of approved quality and colour. - -
31 - - -
32 18.21.2.1 15 mm nominal bore with 45cm length Each 44 97.15 - 4,274.60 -
33 - - -
DSR -18.53A Providing and fixing CP Brass extension nipple ( size 15mm x 50 mm ) of approved make
34 -
and quality as per direction of engineer - in - charge . Each 44 79.80 - 3,511.20
35 - - -
DSR -17.28 Providing & fixing of Waste pipe for Wash basins & Sinks including pvc waste fittings
36 -
complete. - -
37 Flexible Pipe - - -
38 17.28.2.1 32 mm dia Each 7 119.55 - 836.85 -
39 - - -
DSR -18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI :
12701 marked, with cover and suitable locking arrangement and making necessary holes
40 -
for inlet, outlet and overflow pipes but without fittings and the base support for tank.
lt 10000 11.00 - 1,10,000.00
41 - - -
42 DSR -18.58 Providing and fixing PTMT grating of approved quality and colour - - -
43 - - -
44 18.58.1 100 mm dia Each 2 37.60 - 75.20 -
45 18.58.2 125 mm dia Each 20 51.85 - 1,037.00 -
46 - - -
Fixing, testing & commissioning Health faucet in PVC Flexible Tubu with wall hook. (Spray
47 NS-1 unit, flexible Hose and cructh will be supplied); one number PVC flexible tube of 1.5m Each 13 - 1885 24,505.00
length fitted with wall flange.;b) Hand operated spray unit (instant type).
48 - - -
NS-2 Providing and fixing vertical or horizontal storage type hot water heater electrical operated
fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass
49 non-return valve complete including making connections with 15mm dia CP connecting -
pipes on inlet and outlet, suitable length of power cable and 15 amps plug .
- -
50 - - -
51 a) 15 Litre Capacity Each 4 - 12,081.00 - 48,324.00
52 17.34 Providing and fixing toilet paper holder : - - -
53 17.34.1 C.P. brass Each 13 803.70 - 10,448.10 -
54 - - -
17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm
distance from wall of standard shape with bracket of the same materials with snap fittings
55 -
of approved quality and colour, weighing not less than 105 gms.
Each 5 168.35 - 841.75
56 - - -
57 SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER PIPE - - -

17 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
58 - - -
DSR -12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4
(1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C.
59 sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) -
and a coat of neat cement rounding the edges and making and finishing the outlet
complete Each 4 298.25 - 1,193.00
60 - - -
DSR -12.41 Providing and Fixing on wall unplasticised Rigid PVC Rain water pipes conforming to IS :
61 13592 Type A , including jointing with seal ring conforming to IS : 5382 , leaving 10 mm gap -
for thermal expansion - -
62 - - -
63 12.41.2 Single Socketed pipes 110 mm diameter Metre 82 377.40 - 30,946.80 -
64 - - -
65 DSR -12.44 Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter a Each 8 54.70 - 437.60 -
66 - - -
DSR -12.37 Providing and Fixing 100 mm diameter and 60 cm long rain water spout in cement mortar
67 -
1:4 ( 1 Cement : 4 Fine Sand ) - -
68 - - -
69 12.37.1 Stone Ware Spout Each 4 164.20 - 656.80 -
70 - - -
DSR -12.42 Providing and Fixing on wall face Rigid Unplasticised UPVC moulded fittings / accessories
for unplasticised Rigid PVC Rain water pipes conforming to IS : 13592 Type A including
71 -
jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion .
- -
72 - - -
73 12.42.1 Coupler - - -
74 - - -
75 12.42.1.2 110 mm diameter Each 28 136.15 - 3,812.20 -
76 - - -
77 12.42.2 Single Push Fit Coupler - - -
78 - - -
79 12.42.2.2 110 mm diameter Each 8 127.60 - 1,020.80 -
80 - - -
81 12.42.3 Single Tee with door - - -
82 - - -
83 12.42.3.2 110x110x110 mm Each 8 234.15 - 1,873.20 -
84 - - -
85 12.42.4 Single Tee without door - - -
86 - - -
87 12.42.4.2 110x110x110 mm Each 8 221.35 - 1,770.80 -
88 - - -
89 12.42.5 Bend 87.5 degree - - -
90 - - -
91 12.42.5.2 110 mm bend Each 8 150.35 - 1,202.80 -
92 - - -
93 12.42.6 Shoe ( Plain ) - - -
94 - - -

18 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
95 12.42.6.2 110 mm Shoe Each 8 131.85 - 1,054.80 -
96 - - -
DSR -12.43 Providing and Fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC
rain water pipes by means of 50x50x50 mm hard wood plugs , screwed with MS screws of
97 -
required length , including cutting brick work with fixing in cement mortar 1:4 ( 1 Cement :
4 Coarse Sand ) and making good the wall etc . complete - -
98 - - -
99 12.43.2 110 mm diameter Each 33 371.30 - 12,252.90 -
100 - - -
NS-4 Providing and fixing uPVC 6 Kg/cm2 Soil , Waste & RWP pipes (IS: 13592 Class B) including
all fittings (plain or door) e.g. bends, junction, cowls, offsets, access pieces, jointing with
101 -
rubber ring/solvent cement joints including cutting chase or holes in walls and floors and
making good wherever required. - -
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for rain water disposal / balcony waste disposal, (6 kg/sq cm) as per IS : 4985 suitable for
rubber ring joints, including all neccessary specials and fittings (confirming to IS:7834) i.e.
bends, tees, junctions, clamps, hangers, rubber rings, C.I. / Aluminium gratings over pipes
102 of dome type construction or vertical grating as per the requirement for terrace, fixing at -
wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from
floor under false ceiling. The rubber ring shall confirm to IS:5382. (Make : Supreme / Astral
/ Ashirwad / Finolex) (Pipe support : Intellotech / Easyflex / Chilly)
- -
The Pipes will be supported by either G.I. U strap clamps on 40x40x3 mm G.I. slotted
angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent
pipes). The The cost will include all support arrangements. The work includes cutting holes
103 -
in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as
required. The work includes commissioning of all pipes lines as per drawings and
specifications and as directed by engg-in-charge at site. - -
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes
for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical
pipes and solvent cement joints for horizontal pipes, including all neccessary specials and
fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),
reducers, WC connectors, couplers, cowels, clamps, long radius / swept bend at bottom of
pipe, (All connections from horizontal to vertical stacks must be through swept type
104 -
fitting) hangers, rubber rings, clean outs, C P Grating for any waste connection from
washing machine etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc.
inside duct / suspended from floor under false ceiling for proper completion of the work.
The rubber ring shall confirm to IS:5382. (Make : Supreme / Astral / Ashirwad / Finolex)
(Pipe support : Intellotech / Easyflex / Chilly)
- -
The Pipes will be supported by either G.I. U strap clamps on 40x40x3 mm G.I. slotted
angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent
pipes). The cost will include all support arrangements. The work includes cutting holes in
105 -
wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as
required. The work includes commissioning of all pipes lines as per drawings and
specifications and as directed by engg-in-charge at site. - -
106 a) 75 mm dia Metre 0 - 886.00 - -
107 b) 110 mm dia Metre 90 - 1,193.00 - 1,07,370.00
108 c) 160 mm dia Metre 20 - 1,838.00 - 36,760.00
109 - - -

19 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
NS-5 Providing & fixing in position upvc P"or S" trap of self cleaning design of following sizes
for the embedded areas Making proper connection with chemical sealent joint , cutting
110 chase / hole in floors /slabs and bringing the same in proper condition in cement concrete -
1:2:4 mix complete as required. including cost of cutting and making good the walls and
floors where required. - -
111 S-Trap type Floor Trap 110 x 110 mm (50 mm seal) - - -
112 a) P-Trap type Floor Trap 110 x 110 mm (Long type - 50 mm seal) Each 10 - 734.00 - 7,340.00
113 - - -
NS-6 Providing & fixing in position upvc floor drain including cost of cutting and making good
114 -
the walls and floors wherever required. - -
115 - - -
116 a) 110 mm inlet and outlet Each 10 - 451.00 - 4,510.00
117 - - -
NS-7 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6
Kg/ Sq cm rating with fitting for waste pipe from fixtures to floor trap including reduces,
enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported
118 -
by clamp & hangers etc. The work includes cutting holes in wall/ floors/ slabs and making
good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Astral
/ Ashirwad / Finolex) - -
119 - - -
120 a) 32 mm OD pipe Metre 12 - 282.00 - 3,384.00
121 b) 40 mm OD pipe Metre 5 - 361.00 - 1,805.00
NS-13 Providing and fixing UPVC inlet fitting with maximum 3 inlets 32,40 or 50 mm size
fabricated from 110 mm dia UPVC pipes and fixed to upvc sockets , fixed to upvc trap with
122 -
chemical sealent joint and set in cement concrete as per standard drawing complete.
Each 10 347.00 - 3,470.00
123 - - -
NS-8 Providing and fixing cast brass floor clean out plug with suitable insert keys for opening,
male threaded joint with GI threaded socket drip seal to soil / waste pipe of CI pipe as
124 -
required complete as per drawing approved sample and direction of engineer in charge.
- -
125 - - -
126 a) 110 mm diameter Pipe Each 4 - 227.00 - 908.00
127 SUB HEAD- III - INTERNAL WATER SUPPLY - -
128 - - -
DSR -18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with
129 -
one step CPVC solvent cement and the cost of cutting chases and making good the same
including testing of joints complete as per direction of Engineer in Charge.
- -
130 Concealed work, including cutting chases and making good the walls etc. - - -
131 - - -
132 18.8.1 15 mm nominal outer dia Pipes Metre 95 497.80 - 47,291.00 -
133 18.8.2 20 mm nominal outer dia Pipes Metre 73 537.60 - 39,244.80 -
134 18.8.3 25 mm nominal outer dia Pipes Metre 55 627.25 - 34,498.75 -
135 18.8.4 32 mm nominal outer dia Pipes Metre 33 739.30 - 24,396.90 -
136 - - -

20 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
DSR -18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability
for hot & cold water supply, including all CPVC plain & brass threaded fittings, including
137 fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with -
one step CPVC solvent cement and testing of joints complete as per direction of Engineer
in Charge. - -
138 Internal work - Exposed on wall - - -
139 18.7.3 25mm nominal bore Metre 20 401.55 - 8,031.00 -
140 18.7.4 32 mm nominal bore Metre 15 518.75 - 7,781.25 -
141 18.7.5 40mm nominal bore Metre 15 702.95 - 10,544.25 -
142 18.7.6 50mm nominal bore Metre 15 934.15 - 14,012.25 -
143 - - -
144 18.16 providing and fixing brass stop cock of approved - - -
145 18.16.1 15 mm nominal bore Each 2 353.25 - 706.50 -
146 - - -
147 18.17 Providing and fixing gun metal gate value with C.T. - - -
148 18.17.1 25 mm nominal bore Each 4 622.40 - 2,489.60 -
149 18.17.1A 20 mm nominal bore Each 2 539.95 - 1,079.90 -
150 18.17.2 32 mm nominal bore Each 3 689.60 - 2,068.80 -
18.11 Supplying, fixing, testing and commissioning of butterfly value of PN 1.6 rating with
151 bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets -
conforming to IS 13095 of following sizes as requires. - -
152 18.11.1 40 mm dia set 1 3,783.48 - 3,783.48 -
153 18.11.2 50 mm dia set 1 3,986.82 - 3,986.82 -
NS-9 Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible
material having hermetic blister closed cell structure of expanded synthetic rubber over
154 -
pipes of following nominal bores and thickness including all required accessories complete
as per specification. - -
155 9 mm thick ( Pipes in Chases) - - -
156 a) For 15 mm dia Pipe (Concealed Pipes) Metre 15 - 92 1,380.00
157 b) For 20 mm dia Pipe (Concealed Pipes) Metre 10 - 101 1,010.00
158 c) For 32 mm dia Pipe (Concealed Pipes) Metre 0 - 120.00 -
159 - - -
NS-10 Providing and Fixing CI double flangs sunction strainer (PN 1.6) "Y" type including, nuts,
160 -
bolts and 3mm thick rubber insertion complete as per standard design. - -
161 a) 50 mm dia nominal bore Each 1 - 2644 2,644.00
162 - - -
NS-11 Providing, fixing, testing and commissioning of motorised butterfly valve of following dia
for filling of overhead water tank complete with high and low level control switches to
control tanks. The level controllers shall be installed in overhead tanks. The level switch
163 will close the valve when water level is high in overhead tank and open the valve when -
overhead water tank level is low. The system should be complete in all respects with
accessories 220 V AC / 24 V DC, IP67 electrical water level control unit, copper control
wiring in whether proof casing etc. - -
164 a) 25 mm dia nominal bore Each 1 - 11393 11,393.00
165 - -
Total 6,13,336 7,770 2,51,333

21 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Electrical)
[ MULTIPURPOSE HALL]
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)
1 SUBHEAD - I - CIRCUIT CUM POINT WIRING
- -
2 - -
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class PVC
3 DSR 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
- -
4 DSR 1.10.3 Group C Point 70 1,545.63 - 1,08,194.18
5 - -
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
6 DSR-1.55 conductor single core cable in surface/ recessed PVC conduit, and earthing the point with
1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.
(Switch Control Secondary Points) - -
7 DSR-1.55.3 Group C Point 50 903.99 - 45,199.44
8 - -
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed steel conduit, with
9 DSR-1.3 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control
Primary Points) - -
10 DSR-1.3.3 Group C Point 2 1,943.89 - 3,887.78
11 - -
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point (without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
12 DSR-1.54 conductor single core cable in surface/ recessed steel conduit, and earthing the point
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.
(Switch Control Secondary Points) - -
13 DSR-1.54.3 Group C Point 1 1,152.64 - 1,152.64
14 - -
15 MCB CONTROL LIGHT POINTS - -
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed steel conduit, with
16 NSI-1 modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm
FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control
Primary Points) - -
17 NSI-1.1 Primary point controlled by one MCB. Point 12 - 1,536 - 18,426.00
18 - - -
Same as item above but Secondary point. i.e. Points to be looped with Primary point with
19 NSI-1.2 Point
2.5 sqmm wire and Point wiring 12 - 1,366 - 16,390.80
20 - - -
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single
21 DSR 1.5 core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated Metre
copper conductor single core cable for loop earthing as required. 350 456.21 - 1,59,673.08 -
22 - - -

22 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS
23 DSR 1.7 PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as
required. - - -
24 DSR 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 344.53 - 17,226.36 -
25 DSR 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 955 388.78 - 3,71,283.37 -
26 DSR 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100 620.57 - 62,057.04 -
27 DSR 1.7.5 2 x 10 sq. mm + 1 x 6 sq.mm earth wire Metre 150 748.06 - 1,12,208.40 -
28 DSR 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 100 1,228.50 - 1,22,849.76 -
29 DSR 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1,733.17 - 1,03,990.32 -
30 - - -
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
31 DSR 1.31 Each
fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular
switch, connections etc. as required. 16 502.57 - 8,041.08 -
32 - - -
Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket outlate with
control by 1 No switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts
grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2mm thick
PVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of
33 NSI-2 Each 14 - 1,796.31 - 25,148.34
aprpoved make and design in 2 mm thick GI box with grid plate and earthing of third pin
of the socket with 2.5 Sq. mm PVC insulated copper conductor stranded flexible FRLS
wire.(maximum four no. of switches socket shall be connected on one circuit)

34 - - -
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
35 DSR 1.32 Each 15 617.41 - 9,261.14 -
fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
36 - - -
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block
37 DSR-1.33 Each
including connections etc. as required. 2 91.66 - 183.33 -
38 - - -
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in
recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP
39 DSR-1.57 Each
MCB, “C” curve including connection, painting etc. as required. (AC's & Gysers)
2 765.97 - 1,531.93 -
40 - - -
Supplying and fixing following modular switch/ socket on the
41 DSR 1.24 existing modular plate & switch box including connections but
excluding modular plate etc. as required. - - -
42 DSR 1.24.6 Telephone socket outlet Nos 4 155.93 - 623.73 -
43 - - -
Supplying and fixing following size/ modules, GI box alongwith
44 DSR 1.27 modular base & cover plate for modular switches in recess etc.
as required. - - -
45 DSR 1.27.1 1 or 2 Module (75mmX75mm) Nos 4 313.97 - 1,255.89 -
46 - - -
Supplying and fixing following size/ modules, GI box alongwith
47 DSR 1.24 modular base & cover plate for modular switches in recess etc.
as required. - - -

23 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)
48 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 2 128.54 - 257.08 -
49 DSR 1.24.1 5/6 amps switch Each 2 108.52 - 217.04 -
50 - - -
Supplying and fixing following size/ modules, GI box alongwith
51 DSR 1.27 modular base & cover plate for modular switches in recess etc.
as required. - - -
52 DSR 1.27.4 6 module (78mm X 205 mm X 50 mm) Nos 2 423.55 - 847.09 -
53 - - -
Supplying and fixing of following sizes of medium class PVC
conduit along with accessories in surface/recess including
54 DSR 1.21
cutting the wall and making good the same in case of recessed
conduit as required. - - -
55 DSR 1.21.2 25 mm Mtr 20 152.77 - 3,055.44 -
56 DSR 1.21.3 32 mm Mtr 20 193.86 - 3,877.25 -
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper
57 1.18 conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit
as required. - - -
58 1.18.2 2 Pair Mtr 100 40.04 - 4,003.68 -
59 TOTAL CARRIED TO SUMMARY FOR SUBHEAD - I - -
60 - -
61 SUBHEAD - II - FITTINGS & FIXTURES - -
62 - -
63 NSI-1 Supply, Installation, Testing and Commissioning of 9 W Bulk head Light. Each 6 - 1,778.35 - 10,670.10
64 - -
65 NSI-2 Supply, Installation, Testing and Commissioning of 5W Mirror Light. Each 2 - 1,077.79 - 2,155.58
66 - -
Supply, Installation, Testing & Commissioning of recessed type down lighter complete with
67 NSI-3 Each
lamps & accessories 18 W LED 86 - 1,975.94 - 1,69,930.84
68 - -
69 NSI-4 Supply, Installation, Testing and Commissioning of 20W Wall/Surface mouted 4 ft. LED Each 15 - 1,975.94 - 29,639.10
70 - -
Supply, Installation, Testing and Commissioning of 65W Surface mounted LED Bay light.
71 NSI-5 Each
10 - 6,107.46 - 61,074.60
72 - -
Supply, Installation, Testing and Commissioning of 12W Recessed mounted LED circular
73 NSI-6 Downlighter (Cat no-Bajaj Lighting BGSLO SLEEK SURFACE 12W WH RD or equivalent as Each
specified in the approved list of make) 40 - 1,167.60 - 46,704.00
74 - -
Supply, Installation, Testing and Commissioning of 150W highway with 150LPW Ceiling
75 NSI-7 Each
mounted LED Light Fixtures 6 - 7,469.82 - 44,818.92
Supply, Installation, Testing and Commissioning of 250W Highway with 130LPW ceiling
76 NSI-8 Each 17
mounted LED Light Fixtures - 11,204.73 - 1,90,480.41

24 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)

Supply, Installation, Testing and Commissioning of 1200 mm sweep,


BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)
Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2
nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9,
77 DSR 19.1 Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM Each 8 2,730.00 - - 21,840.00
(tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for
speed control and all remaining accessories including safety pin, nut bolts, washers,
temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm,
suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

78 - -
Supplying and fixing two module stepped type electronic fan
79 DSR 1.25 regulator on the existing modular plate switch box including Each
connections but excluding modular plate etc. as required. 8 388.78 - 3,110.23
80 - -
Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard length (upto 30 cm) with 1.5
81 DSR 1.44 Each
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required. 8 224.42 - 1,795.33
Supply of following sizes of heavy duty Domestic exhaust fan for single phase 230 volt,
82 NSI-9 50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter etc as
required. - -
83 300 mm Exhaust Fan Each 4 - 2,155.58 - 8,622.32
84 - -
Supply of following sizes of heavy duty Domestic exhaust fan for single phase 230 volt,
85 NSI-10 50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter etc as
required. - -
86 450 mm Exhaust Fan each 15 - 6,848.44 -
87 TOTAL CARRIED TO SUMMARY FOR SUBHEAD - II - -
88 SUBHEAD - III - MAIN BOARDS - -
Supplying, installing, testing & commissioning of following type compartmentalised wall
mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin
89 proof duly phosphatized & powder coated inclusive of suitable size 4 strip Al. Busbar
complete with interconnection providing Lugs, inter-earthing, painting etc. i/c providing &
fixing below noted accessories: - -
Receiving,unloading,storing, handling, installation, testing and commissioning of following
90 MV Switchboards complete as required and as per site condition and dimension of all
panels shall be carried out as per the attachad sld - -
91 - -
92 NSI-1 MAIN LT PANEL ( FOR BUILDING ) Set 1 - 1,50,800.00 - 1,50,800.00
93 - -
94 NSI-2 FIRE FIGHTING PANEL Set 1 - 40,000.00 - 40,000.00
95 - -
96 SUBHEAD - IV - DISTRIBUTION BOARDS - -
97 - -
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
98 DSR 2.3 complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator) - -

25 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)
99 DSR 2.3.1 6 way, Double door Each 0 2,324.24 - -
100 DSR 2.3.2 8 way, Double door Each 1 2,710.91 - 2,710.91
101 DSR 2.3.3 12 way, Double door Each 2 2,439.08 - 4,878.17
102 - -
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution
board, 415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar,
103 DSR 2.4 earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder
painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
- -
104 DSR 2.4.1 4 way (4 + 12), Double door Each 0 4,310.28 - -
105 DSR 2.4.2 6 way (4 + 18), Double door Each 1 5,240.61 - 5,240.61
106 DSR 2.4.3 8 way (4 + 24), Double door Each 2 6,286.83 - 12,573.66
107 - -
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V,
TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive
of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting
108 DSR 2.5
MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is
normally used where 3 phase outlets are required.)
- -
109 DSR 2.5.3 12 way (4 + 36), Double door Each 0 13,520.85 - -
110 - -
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit
111 DSR 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required. - -
112 2.10.1 Single Pole Each 92 269.72 - 24,814.39
113 2.10.2 Single Pole Neutral Each 0 631.11 - -
114 - -
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB
115 DSR 2.12
complete with connections, testing and commissioning etc. as required. - -
116 DSR 2.12.1 40 A Each 3 458.32 - 1,374.95
117 DSR 2.12.2 63 A Each 0 555.25 - -
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB
118 DSR 2.13
complete with connections, testing and commissioning etc. as required. - -
119 DSR 2.13.1 40 A Each 2 1,021.99 - 2,043.98
120 DSR 2.13.2 63 A Each 1 1,089.42 - 1,089.42
121 - -
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V,
residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing
122 DSR 2.14
MCB DB complete with connections, testing and commissioning etc. asrequired.
- -
123 DSR 2.14.1 25 A Each 0 2,136.70 - -
124 DSR 2.14.2 40 A Each 9 2,783.61 - 25,052.50
125 DSR 2.14.3 63 A Each 3 2,867.90 - 8,603.70
126 - -
Supplying and fixing DP sheet steel enclosure on surface/ recess
along with 25/32 A 240 V "C" curve DP MCB complete with
127 DSR-2.16 connections, testing and commissioning etc. as required. Each

3 1,231.66 - 3,694.98

26 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR- DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 E/M (In ₹)
128 - -
Supplying and fixing single pole blanking plate in the existing
129 DSR 2.11 Each
MCB DB complete etc. as required. 5 13.70 - 68.48
130 - -
131 TOTAL CARRIED TO SUMMARY FOR SUBHEAD - IV - -
Total 21,840 12,37,928 8,14,861

27 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Fire Fighting)
[ MULTIPURPOSE HALL]
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
1 SUB HEAD - A : PUMPS & EQUIPMENTS - - -
18.4 Supplying , Installation , Testing and Commissioning of Electric Driven Terrace Pump
2 Suitable for Automatic operation and Consisting of Following Complete in all Respect as - -
Required ( Terrace Fire Pump ) -
3 - - -
a) Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and Bronze Impeller with
4 - -
Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520 -
5 - - -
b) Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed 1500 RPM , Suitable
for operation on 415 Volts 3 Phase 50 Hz AC Supply with IP 68 protection for enclosure
6 - -
Horizontal Foot Mounted type with class F insulation Conforming to IS : 325 with Energy
Efficiency class IE-3 -
c) MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts etc as
7 - -
Required -
8 - - -
9 d) Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads - - -
10 - - -
The Head of the Pump is Selected in a manner so as to give a minimum 3.5 kg/sqcm
11 - -
pressure at the highest / farthest point -
12 - - -
13 18.4.1 900 Lpm at 35 m Head Set 1 1,07,318.64 - 1,07,318.64 -
14 - - - -
18.20 Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms sheet 2000 mm in
height with air release valve on top and flanged connection to riser drain arrangement
15 with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and Set 2 19,221.88 38,443.76 -
painting with synthetic enamel paint of approved shade as required
-
16 PIPING, HYDRANT , AND ACCESSORIES SYSTEM - -
17 - -
18.7 Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to -
IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets
18 etc in ground including welding excavation and Providing cement concrete blocks as
supports anticorrosive treatment with coaltar / asphalts tape as per IS :10221 refilling the
trench etc of following sizes complete as required . -
19 - -
20 18.7.7 100 mm dia Metre 120 2,691.95 - 3,23,033.76 -
21 18.7.6 80 mm dia Metre 10 1,986.04 - 19,860.36 -
22 - - - -
18.11 Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze -
23 Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming - -
to IS : 13095 of following sizes as required . -
24 - - - -
25 18.11.4 80 mm dia Set 3 5,249.04 - 15,747.11 -
26 18.11.5 100 mm dia Set 5 7,024.35 - 35,121.76 -
18.14 Providing Installation Testing and Commissioning of Non Return Valve of following sizes -
27 conforming to IS : 5312 complete with rubber gasket , GI Bolts , Nuts , washers etc as - -
required . -

28 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
28 - - - -
29 18.14.5 100 mm dia Set 1 11,642.28 - 11,642.28 -
30 - - - -
18.15 Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated -
31 out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless - -
steel flange . -
32 - - - -
33 18.15.2 100 mm dia Each 1 7,021.19 - 7,021.19 -
34 - - - -
18.9 Supplying and Fixing Single Headed Internal Hydrant Valve with instantaneous gunmetal -
35 material coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS : 5290 ( - -
Type A ) with blank Gunmetal material cap and chain as required . -
36 - - - -
37 18.9.1 Single Headed Gunmetal Material Set 3 8,055.83 - 24,167.48 -
38 - - - -
18.13 Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with
orifice of required size to be fitted between flange and landing valve of external and
39 5,567.22 -
internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as
required . Each 4 1,391.81 -
40 - - - -
18.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male and female
41 coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 ( Type A ) as Required . - -
- -
42 - - - -
43 18.16.1 Gunmetal Material Set 3 5,480.83 - 16,442.48 -
44 - - - -
18.17 Supplying and Fixing First aid hose reel with MS Construction Spray painted in Post office -
45 - -
red conforming to IS : 884 complete with the following as required -
46 - - - -
20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type - 2 as per -
47 - -
IS : 12585 -
48 20 mm nominal internal dia gunmetal globe valve and nozzle - - - -
49 Drum and Brackets for fixing the equipments on wall - - - -
50 Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and socket - - - -
51 18.17.2 40 Metre Length Set 3 12,720.11 - 38,160.34 -
52 - - - -
18.18 Supplying and Fixing 63 mm dia Gunmetal Short Branch Pipe with 20 mm nominal internal
53 diameter size nozzle conforming to IS : 903 suitable for instantaneous connection to - -
interconnect hose pipe coupling as required . - -
54 18.18.1 Gunmetal Material Set 6 2,545.50 - 15,272.99 -
55 - - - -
18.22 Providing and Fixing of Pressure Switch in MS Pipe Line including connection etc as
56 1,628.87 -
required Each 1 1,628.87 -
57 - - -

29 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Providing and fixing MS partly glazed double hung lockable shutter fabricated from MS
section as required with 5 mm thick glass for fire station complete including stove
enamelled painting of door and frame and words "Fire Hydrant" written on glass, suitable
58 NS-1 to accommodate 2 Hydrant landing valves, 1 fire hose reel, 2 nos.15m long 63 mm dia 91,485.00
hose,1-branch pipe, 1no. fire man's axe, fire extiguishers 2 nos, including suitably mounted
on a raised masonry platform as required. (Approx.size 1.20 m x 2.1m )
Each 3 - 30495.00 -

Providing and fixing weather proof Fire Hose Cabinet of size not less than 0.75 x 0.6 x 0.25
mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm
thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE
59 NS-2 35,562.00
HOSE" including necessary locking arrangement and painting in PO red colour suitable to
accommodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe,
nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.
Each 3 - 11854.00 -
NS-3 Providing & fixing Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m
long complete with instantaneous type Stainless steel 63 mm dia ISI marked Male &
60 Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm 30,486.00
copper wire.brusting pressure not less than 22 Kg/Sqcm. ( Two nos. for each hydrant-
valve) Each 6 - 5081.00 -
61 - - -
62 NS-4 Providing and fixing standard firemans axe with heavy rubber handle. Each 3 - 1467.00 - 4,401.00
63 - - -
NS-5 Providing and fixing dial type pressure gauge with isolation cock and copper pipe on
64 41,496.00
main header Dial diameter 100 mm celebration 0-16 / sq. cm. Each 12 - 3458.00 -
NS-6 Providing and fixing carbon-di-oxide type fire extinguishers consisting of pressure tested -
single cast cylinder with rotary discharge valve and high pressure discharge tube of
65 minimum 1 m length, discharge horn, suspension bracket conforming to IS:15683 finished -
externally with red enamel paint and fixed to wall with brackets complete with internal
charge (Halon Free Gas) -
66 Capacity 4.5 Kg. Each 1 - 5647.00 - 5,647.00
NS-7 Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. -
cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage
67 internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, -
suspension bracket conforming to IS:15683 finished externally with red enamel paint and
fixed to wall with brackets complete with internal charge. (Halon Free Gas) -
68 Capacity 6.0 Kg. Each 14 - 4518.00 - 63,252.00
Total - 6,59,428 2,72,329

30 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Fire Alarm)
[ MULTIPURPOSE HALL]
DSR- Rate (DSR-
Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. 2023/DSR DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
+ GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
2022 (In ₹)
1 SUBHEAD - I - FIRE ALARM CONVENTIONAL SYSTEM - -
Supplying, installation, testing & commissioning sector panel suitable for following zones,
complete with visual indications for short circuit fault, open circuit fault, fire condition and
2 DSR 17.1.9 -
all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered,
complete with all connections, interconnections as required -
3 DSR 17.1.9.1 4 Zone Nos. 1 8,921.88 8,921.88 -
Supplying, installation, testing & commissioning of conventional beam detector with short
4 NS-1 circuit isolator (inbuilt or seperate) complete with emitter and receiver including Nos. 2 - 43,644 87,288
connections with remote test features etc complete as -
Supplying, installation, testing & commissioning of smoke detector with builtin LED and
5 DSR 17.1.2 Nos. 10 1,202.16 12,022 -
mounting base complete with all connections etc. as required -
Supplying, installation, testing & commissioning of manual call boxes of MS construction in
6 DSR 17.1.3 surface/recess with stainless steel chain & hammer assembly complete with glass and push Nos. 4 486.76 1,947 -
button etc. as required. -

Supplying, installation, testing & commissioning fire alarm sounder with facility to make
7 DSR 17.1.6 Nos. 4 574.21 2,297 -
announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for
operation with amplifier i/c line matching transformer etc. complete as required. -
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with
8 DSR 17.5.2 annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer Mtrs 160 148.56 23,769 -
sheath complete as required. -
Supplying and fixing of following sizes of steel conduit along with accessories in
9 DSR 1.20 surface/recess including painting in case of surface conduit, or cutting the wall and making -
good the same in case of recessed conduit as required. -
10 DSR 1.20.2 25 mm Mtr 50 173.84 - 8,692 -
11 DSR 1.20.3 32 mm Mtr 10 213.88 - 2,139 -
Total - 59,788 87,288

31 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Sound)
[ MULTIPURPOSE HALL]
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
NS Supply of FBT Line Array Compact Bass reflex Active line array - 2x10" + 2x1"-
600Wrms+300Wrms Class D amplifiers, 600W RMS to the LF, 300W RMS to the HF 2 x 10”
woofers with 2.5" coil 2 x custom B&C HF compression drivers with 1" throats DSP on
1 1 86,400.00 - 86,400.00
board with 8 preset 90° horizontal waveguide up to 18kHz Control panel with XLR
«in&link», HF level, preset, HP filter, GND lift switch High SPL capability: 135dB Integrated
rigging hardware Completely Manufactured in Italy (FBT-Muse-210LA) Nos -
NS Supply of Powered Base Speaker Configuration: 1 HYBRID BANDPASS way 18"Built-in
amplifier LF/HF: 1200 W RMS Built-in amplifier peak LF/HF: 2400 W Frequency response:
33Hz-100Hz -6dB Low Frequency woofer: 1X18 - 3.5 coil - neodymium inch Maximum SPL
cont/peak: 135/139 half-space dB Dispersion: Omnidirectional HxV Input impedance: 22
2 Nos 1 - 1,86,890.00 - 1,86,890.00
Kohm Crossover Frequency: preset dependant KHz AC Power requirements: 640 VA Input
connector: XLR with loop Power cord: 5/ 16.4 m/ft Net Dimension (WxHxD): 652x500x750
/ 25.66x 19.68x29.52 mm/inch Net Weight: 67/147.70 kg/lb(FBT-Muse 118FSA)

NS
3 Supply of Flying bar Indian (Customised) with 1 ton chain pully Nos 1 - 18,500.00 - 18,500.00

NS Supply of Stage Monitor Supply of Stage monitor 2-way, bi-amp. bass reflex design,
400+100W rms Class D amp., 60Hz-20KHz freq resp, 12" B&C coax custom woofer, 1" B&C
4 47,100.00
HF driver, DSP 4 presets, 130dB SPL max, Disp 90°, gas-injection polyprop molded
enclosure (FBT-STAGEMAX x 12MA) Nos 1 - 47,100.00 -
NS Supply of Digital Audio mixer 24 mono mic inputs 4 line inputs 66 inputs to mix 1 ViSi
Connect™ option card slot for 64 x 64 input/output expansion Freely assignable faders and
patching Pre/Post selection per input per bus AES in and out Global mode encoders
5 Soundcraft FaderGlow™ GEQ on every bus 20 sub-group / aux busses 4 FX busses 8 Matrix 84,500.00
busses LR and C Mix busses 4 Stereo Lexicon Effects engines Delay on inputs and outputs 4
Mute Groups Freely assignable insert loops Harman HiQnet integration Colour touch
screen interface (Si Expersion-2)(Allen Heath QU 24) No. 1 - 84,500.00 -
6 NS Supply of Corded microphone (Shure-SM58/FBT/sennheiser) Nos 1 - 9,154.00 - 9,154.00
7 NS Supply of Instrument Microphone(Shure-57/FBT/sennheiser) Nos 1 - 9,678.00 - 9,678.00
8 NS Supply of Podium Microphone (Shure/FBT-GM5218L/AKG) Nos 1 - 13,411.00 - 13,411.00
9 NS Supply of Microphone Stand Big(GS) Nos 1 - 1,124.00 - 1,124.00
10 NS Supply of Microphone Stand Small(GS) Nos 1 - 843.00 - 843.00
NS Supply of microphone cable from stage to control room for microphone points with
11 26,331.00
conduit pipe etc. (PLS/Tasker/Krystal) Mtr 201 - 131.00 -
12 NS Supply of Speaker 2.5sqmm x3core(Incol/Polycab/Kalinga/Incoil) Mtr 95 - 114.00 - 10,830.00
NS Supply of microphone connecting box made out from CRC sheet metal box duly powder
13 coated paint,with 6 nos XLR panel mounting socket & phono socket having the facility to 8,644.00
connect the 6nos microphone channel. Nos 2 - 4,322.00 -
14 NS Supply of Professional Head phone(German Meastro/Sennheiser) Nos 1 - 7,081.00 - 7,081.00
15 NS Supply of Microphone cable XLR to XLR up to 10 Mtr(PLS) Nos 10 - 1,265.00 - 12,650.00
16 NS Supply of Microphone cable XLR to XLR up to 15 Mtr(PLS) Nos 10 - 1,861.00 - 18,610.00
17 NS Supply of Speaker connectin connector & MCB Box for Speaker etc Lot 1 - 33,254.00 - 33,254.00
18 NS Installation charges Job. 1 - 25,000.00 - 25,000.00
Total - - 6,00,000

32 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Line Making)
[ MULTIPURPOSE HALL]
Rate (DSR-
DSR- Rate DSR-2022 NS Rate Amount (DSR-2023) Amount (DSR
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) NS AMOUNT (In ₹)
2023 + GST 5.36% (In ₹) (In ₹) 2022+GST 5.36%)
(In ₹)
Line marking for Sports with epoxy paint 3mm thick (two or more coats) with
1 NS prepared and applied as per manufacturer’s specifications including appropriate LS 1 - 1,00,000 - 1,00,000.00
priming coat, preparation of surface, etc. complete

Total - - 1,00,000

33 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

BILL OF QUANTITY (CC Road)


Rate (DSR- Rate DSR-
Sl. DSR- NS Rate Amount (DSR-2023) Amount (DSR
DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST NS AMOUNT (In ₹)
No. 2023 (In ₹) 2022+GST 5.36%)
5.36%
Preparation and consolidation of sub grade with power road roller of 8 to 12
tonne capacity after excavating earth to an average of 22.5 cm depth,
1 16.1 dressing to camber and consolidating with road roller including making good Sqm 55.000 218.90 12,039.50
the undulations etc. and re-rolling the sub grade and disposal of surplus
earthwith lead upto 50 metres.
Construction of granular sub-base by providing close graded Material
conforming to specifications, mixing in a mechanical mix plant at OMC,
carriage of mixed material by tippers to work site, for all leads & lifts,
2 16.78 spreading in uniform layers of specified thickness with motor grader on cum
prepared surface and compacting with vibratory power roller to achieve the
desired density, complete as per specifications and directions of Engineer-in-
Charge.
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having
2 16.78.1 cum 3.500 2784.00 9,744.00
CBR Value-30

Construction of dry lean cement concrete sub base over a prepared sub-
grade with coarse and fine aggregate conforming to IS:383, the size of coarse
aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per specifications, cement
3 16.80 content not to be less than 150 Kg/cum, optimum moisture content to be cum 3.500 4148.65 14,520.28
determined during trial length construction, concrete strength not to be less
than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all
leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne
vibratory roller, finishing and curing etc. complete as per direction of
Engineer in- charge.
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete
from batching plant. The ready mixed concrete shall be laid and finished with
screed board vibrator , vacuum dewatering process and finally finished by
floating, brooming with wire brush etc. complete as per specifications and
3 16.75 directions of Engineer-incharge. cum 4.375 9823.80 42,979.13
(The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/ recoverable
separately).

Providing and filling in position rubberized bitumen hot sealing compound Per cm
for sealing of expansion joints in roads / pavements all complete as per width
direction of the Engineer-in-Charge. per
4 16.46.1 Using grade 'A' sealing compound conforming to IS: 1834 cm 131.250 8.65 1,135.31
depth
per m
length

34 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

Rate (DSR- Rate DSR-


Sl. DSR- NS Rate Amount (DSR-2023) Amount (DSR
DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST NS AMOUNT (In ₹)
No. 2023 (In ₹) 2022+GST 5.36%)
5.36%
Providing and laying at or near ground level factory made kerb stone of M-25
grade cement concrete in position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of joints
4 16.69 except at sharp curve shall not to more than 5mm), including making Cum 0.810 8613.55 6,976.98
drainage opening wherever required complete etc. as per direction of
Engineer-in-charge (length of finished kerb edging shall be measured for
payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge).

Excavating, supplying and filling of local earth (including royalty) by


mechanical transport upto a lead of 5km also including ramming and
5 2.25a cum 7.536 700.50 5,278.97
watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides
of foundation etc. complete.
Painting with synthetic enamel paint of approved brand and manufacture of
5
required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with
6 3,529.35
13.62.1 ordinary paint of approved brand and manufacture sQM 9.000 392.15
-
96,203.52 - -

35 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (Pathway)

Rate (DSR- Amount (DSR- Amount (DSR


Sl. DSR- Rate DSR-2022 NS Rate
DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2023) 2022+GST NS AMOUNT (In ₹)
No. 2023 + GST 5.36% (In ₹)
(In ₹) (In ₹) 5.36%)

Earth work in excavation by mechanical means (Hydraulic


excavator) / manual means over areas (exceeding 30cm in
depth. 1.5 m in width as well as 10 sqm on plan) including
1 disposal of excavated earth, lead upto 50m and lift upto 1.5m,
disposed earth to be levelled and neatly dressed.

2.6
2 2.6.1 all kinds of soil Cum 9.45 177.50 1677.38
3
Providing and laying in position cement concrete of specified
4 grade excluding the cost of centering and shuttering. All work
upto plinth level.
1:5:10 (1 cement : 5 course bound: 10 graded stone
5
4.1.10 aggregate 40mm nominal size) Cum 9.75 6518.60 63556.35
6
7
16.68 Providing and laying 60mm thick faciory made cement
concrete interlocking paver block of M -30 grade made by
block making machine with strong vibratory compaction, of
8 approved s;ze, design & shape, laid in required colour and
pattern over and including 50mm thick compacted bed of
coarse sand, filling the joints with line sand etc. all complete as
per the direction of Engineer-in-charge.
Cum 89.40 972.00 86896.80
9
Providing and laying at or near ground level factory made kerb
stone of M-25 grade cement concrete in position to the
required line, level and curvature, jointed with cement mortar
1:3 (1 cement: 3 coarse sand), ncluding making joints with or
without grooves (thickness of joints except at sharp curve shall
10 not to more than 5mm), including making drainage opening
wherever required complete etc. as per direction of Engineer-
in-charge (length of finished kerb edging shall be measured for
payment). (Precast C.C. kerb stone shall be approved by
Engineer-in-charge).
16.69 Cum 4.00 10177.60 40710.40

36 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
Rate (DSR- Amount (DSR- Amount (DSR
Sl. DSR- Rate DSR-2022 NS Rate
DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2023) 2022+GST NS AMOUNT (In ₹)
No. 2023 + GST 5.36% (In ₹)
(In ₹) (In ₹) 5.36%)

Painting with synthetic enamel paint of approved brand and


11
manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable
12 shade with ordinary paint of approved brand and manufacture
13.62.1 Sqm 15.00 226.25 3393.75
Excavating, supplying and filling of local earth (including
royalty) by mechanical transport upto a lead of 5km also
13 including ramming and watering of the earth in layers not
exceeding 20 cm in trenches, plinth,
2.25a sides of foundation etc. complete.
14 20.00 700.50 14010.00
Filling available excavated earth (excluding rock) in trenches,
plinth, sides of oundations etc. in layers not exceeding 20cm
15 in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
2.25 7.20 196.00 1411.20
16 deduct PCC
17
Centering and shuttering including strutting, propping etc. and
18
removal of form for all heights :
Foundations, footings, bases of columns, etc. for mass
19
5.9.1 concrete. 15.98 392.15 6267.54
217923.41 0.00 0.00

37 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

BILL OF QUANTITY (External Water Supply)


Amount
Rate (DSR- Rate DSR- Amount (DSR-
DSR- NS Rate (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2023 (In ₹) 2022+GST ₹)
(In ₹) 5.36% (In ₹)
5.36%)
1 SUB HEAD- V EXTERNAL WATER SUPPLY
Supplying, installing, testing and commissioning vertical on line
multi stage centrifugal pumping set with mechanical seal, C.I.
volute and SS impeller & SS shaft connected to a TEFC induction
motor of suitable HP for 415 volts, 3 phase, 50 cycles A.C. supply
with 150 mm dia pressure gauge with SS/gunmetal isolation
cock, vibration eliminating pads, base plate wiring upto panel
2 MR and equipment for water level controller to start and stop the
pump automatically at predecided levels of the water in the tank
with provision of protection for dry run etc. complete in all
respect (The shop drawing or the pumps along with its
characteristics curves, model and technical data etc. are to be
submitted for approval before purchase of pump).

Domestic water pumps (Treated water transfer pump to terrace


3
tank) (1W+1S)
4 Capacity 50 lpm
5 Head 15M EACH 2 20000 40000
Providing and fixing G.I. pipes complete with G.I. fittings
6 18.10 and clamps, i/c cutting and making good the walls etc.
Internal work - Exposed on wall
7 18.10.6 50 mm dia nominal bore RMT 25 1048.35 26208.75
Providing and fixing G.I. pipes complete with G.I. fittings
8 18.12 including trenching and refilling etc.
External work
9 18.12.6 External work RMT 15 762.15 11432.25
10 TOTAL 37,641.00 - 40,000

38 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

BILL OF QUANTITY (Apron Drain)

Rate DSR-2022 Amount (DSR- Amount (DSR


DSR- DSR- NS Rate
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022+GST NS AMOUNT (In ₹)
2023 2023 + GST 5.36% (In ₹)
(In ₹) 5.36%)
Earth work in excavation by mechanical means
(Hydraulic excavator)/manual means over areas
(exceeding 30 cm in depth, 1.5 m in width as
1 2.6 well as 10 sqm on plan) including getting out and
disposal of excavated earth lead upto 50 m and
lift upto 1.5 m, as directed by Engineer-in-
charge.
2 2.6.1 all kinds of soil cum 65.3 177.50 11584.38
3 2.25
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
layers not exceeding 20cm in depth:
4 consolidating each deposited layer by ramming
and watering, lead up to 50 m and lift up to 1.5
m. cum 16.7 3272.66
196.00
5 Qty. = 25% of them no 1
6 4.1
Providing and laying in position cement concrete
of specified grade excluding the cost of
7 4.1.10
centering and shttering - All work up to plinth
level
8 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 cum 13.7 6518.60 89053.07
9
1:2:4 (1 Cement : 2 coarse sand (zone-III)
derived from natural sources : 4 graded stone
10 4.1.4
aggregate 40 mm nominal size derived from
natural sources) cum 4.6 7780.30 35429.88
11
12
13
Centering and shuttering including strutting,
14 5.9.1 propping etc. and removal of form for all heights
: Sqm 30.4 392.15 11905.13
Foundations, footings, bases of columns, etc. for
15
mass concrete

39 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

Rate DSR-2022 Amount (DSR- Amount (DSR


DSR- DSR- NS Rate
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022+GST NS AMOUNT (In ₹)
2023 2023 + GST 5.36% (In ₹)
(In ₹) 5.36%)
16
Brick work with F.P.S. bricks of class
17 6.1.2
designation 75 in foundation and plinth in :
18 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 10.6 7132.25 75783.84
19 13.7
12 mm cement plaster finished with a floating
20 13.7.2
coat of neat cement of mix : "
21 1:4 (1 cement: 4 fine sand) Sqm 115.4 425.55 49092.62
Total 2,76,122 - -

40 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

BILL OF QUANTITY (External Sewer line)


Amount
Rate (DSR- Rate DSR- Amount (DSR-
DSR- NS Rate (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2023 (In ₹) 2022+GST ₹)
(In ₹) 5.36% (In ₹)
5.36%)
1 SUB HEAD- IV EXTERNAL SEWARAGE LINE
Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, anddressing of sides, ramming of bottoms, depth
up to 1.5 m, including getting out the excavated soil, and then returning
2 2.1 the soil as required, in layers not exceeding 20 cm in depth, including
consolidating each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed,within a lead of 50 m :

3 2.10.1 All kinds of soil


Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
4 2.10.1.2
METER 130 352.15 45779.5
5
Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover with
frame of 300x300 mm size (inside) the weight of cover to be not less
6 19.4.1.1 than 4.50 kg and frame to be not less than 2.70 kg as per standard
design: 100x100 mm size P type. With common burnt clay F.P.S. (non
modular) bricks of class designation 7.5
EACH 7 2707.65 18953.55
7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate
40 mm nominal size), inside plastering 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement
8 19.7 and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame
(light duty) 455x610 mm internal dimensions,total weight of cover and
9 19.7.1 frame to be not less than 38 kg (weight of cover 23 kg and weight of
frame 15 kg) :

41 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

Amount
Rate (DSR- Rate DSR- Amount (DSR-
DSR- NS Rate (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2023 (In ₹) 2022+GST ₹)
(In ₹) 5.36% (In ₹)
5.36%)
With common burnt clay F.P.S.(non modular) bricks of class designation
10 19.7.1.1 7.5
EACH 8 12770.55 102164.4
11
Constructing brick masonry road gully chamber 45x45x77.5 cm with
12 19.28 bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast
R.C.C. vertical grating complete as per standard design :
with common burnt clay F.P.S.(non module) brick of class designation
13 19.28.1
7.5 EACH 12 6889.8 82677.6
14
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
15 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine
sand) including testing of joints etc. complete :
16 19.1.2 150 mm dia (NP-2) EACH 130 695.8 90454
17
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
18 19.2 including bed concrete as per standard design :

19 19.2.2 150 mm diameter S.W. pipe CUM 4.55 6050.65 27530.4575


20
Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:
1786, having minimum cross section as 23 mmx25 mm and over all
minimum length 263 mm and width as 165 mm with minimum 112 mm
space between protruded legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and adequate anchoring
projections on tail length on 138 mm as per standard drawing and
suitable to with stand the bend test and chemical resistance test as per
21 19.16 specifications and having manufacture's permanent identification mark
to be visible even after fixing, including fixing in manholes with 30x20x15
cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) complete as per design.

EACH 28 553.7 15503.6


22

42 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)

Amount
Rate (DSR- Rate DSR- Amount (DSR-
DSR- NS Rate (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2023 (In ₹) 2022+GST ₹)
(In ₹) 5.36% (In ₹)
5.36%)
Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
23 19.21 20 mm nominal size) cement plastered on both sides with cement
mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of
neat cement and making necessary channels for the drain etc. complete
:
For pipes 100 to 250 mm diameter EACH 1 810.45
24 19.21.1
810.45
25
Constructing brick masonry circular type manhole 0.91 m internal
dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement
: 4 coarse sand), inside cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat
of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
26 19.9
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished
with a floating coat of neat cement, all complete as per standard
design :
0.91 m deep with SFRC cover and frame (heavy duty, HD-
20 grade designation) 560 mm internal diameter conforming
to I.S. 12592, total weight of cover and frame to be not
less than 182 kg., fixed in cement concrete 1:2:4 (1 cement
27 19.9.1
: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
With common burnt clay F.P.S. (non modular) EACH 1 12725 12725
28 19.9.1.1
bricks of class designation 7.5
29 TOTAL OF SUB HEAD - IV 3,96,598.56 - -

43 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
BILL OF QUANTITY (External Electrification)

DSR- Rate (DSR- Rate DSR- NS Rate Amount (DSR- Amount (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2022 (In ₹) 2022+GST 5.36%) ₹)
(In ₹) 5.36% (In ₹)

EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonary enclosure with cover plate having locking
1 DSR 5.4 Sets
arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke
and salt as required. 1 7,872.50 7,872.50
-
Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including
accesssories, and providing masonary enclosure with cover plate (CI heavy duty)
2 DSR 5.6 Sets
having locking arrangement and watering pipe pipe of 2.7 mtr long etc. with
charcoal or coke and salt) as required. 1 14579.72 14,579.72
-
Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth
3 DSR 5.11 electrode, including connection with G.I. nut, bolt, spring, washer excavation and Mtr
refilling etc. as required. 20 743.84 14,876.83

-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for
4 DSR-5.14 connections etc. as required. 2 nos used for 50 x 5 for the Neutral earthing of Mtr
euipments ) 20 1,224.28 24,485.66
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
5 DSR 5.15 connections etc. as required. Mtr
20 257.08 5,141.57
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing
6 DSR 5.16 etc. as required. Mtr
20 73.75 1,475.04
-
Supply and laying medium class GI pipe under road/paved areas/wall crossing etc.
8 NSI-2 including earth excavations refilling, ramming and making good as approved.
-
150 mm dia GI pipe Class B
8.1 NSI-2.1 Metre
10 - 1,600.00 16,000.00
TOTAL
- 68,431.32 16,000.00
-
L.T. CABLES
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1
KV grade of following size direct in ground including excavation, sand cushioning,
1 DSR 7.1
protective covering and refilling the trench etc. as
required.

44 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR- Rate DSR- NS Rate Amount (DSR- Amount (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2022 (In ₹) 2022+GST 5.36%) ₹)
(In ₹) 5.36% (In ₹)
1.1 DSR-7.1.1 Upto 35 sq. mm Mtrs. 20 407.74 8,154.86
Laying of one number additional PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size direct in ground in the same trench in one
2 DSR 7.2
tier horizontal formation including excavation, sand cushioning, protective
covering and refilling the trench etc. as required. 0

2.1 DSR 7.2.1 Mtrs.


Upto 35 sq. mm 20 283.42 5,668.37
2.2 DSR-7.2.2 Above 35 sq. mm and upto 95 sq. mm Mtrs. 0 301.33 -
Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire
3 NSI Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-
7098 Code and technical specifications. 0
3.1 NSI-1 6 sq. mm 2 core Mtr. 80 - 153.03 12,242.40
3.2 NSI-2 10 sq. mm 2 core Mtr. 0 - 211.43 -
3.3 NSI-3 6 sq. mm 4 core Mtr. 0 - 228.35 -
3.4 NSI-4 10 sq. mm 4 core Mtr. 60 - 239.16 14,349.60
3.5 NSI-5 4 X 16 sq. mm (28mm Mtr. 0 - 301.41 -
3.6 NSI-6 3½ X 25 sq. mm (28mm) Mtr. 0 - 359.85 -
3.7 NSI-7 3½ X 35 sq. mm (32mm) Mtr. 20 - 407.58 8,151.60
3.8 NSI-8 3½ X 50 sq. mm (35mm) Mtr. 0 - 563.64 -
3.9 NSI-9 3½ X 70 sq. mm (38mm Mtr. 0 - 743.59 -
3.10 NSI-10 3½ X 95 sq. mm (45mm) Mtr. 0 - 918.93 -
3.11 NSI-11 3½ X 120 sq. mm (45mm) Mtr. 0 - 1,133.48 -
3.12 NSI-12 3½ X 150 sq. mm (50mm) Mtr. 0 - 1,312.66 -
3.13 NSI-13 3½ X 185 sq. mm (57mm) Mtr. 0 - 1,651.03 -
3.14 NSI-14 3½ X 240 sq. mm (62mm) Mtr. 0 - 2,090.91 -
3.15 NSI-15 3½ X 300 sq. mm (70mm) Mtr. 0 - 2,535.40 -
0
Supplying and making end termination with brass compression gland and
aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE
4 DSR 9.1
aluminium conductor cable of 1.1 KV grade
as required. -
4.1 9.1.1 2 X 6 sq. mm (28mm Each 5 252.86 - 1,264.32
4.2 NSI-2 4 X 10 sq. mm (28mm Each 2 - 243.73 487.46
4.3 9.1.33 4 X 16 sq. mm (28mm Each 0 325.56 -
4.4 9.1.20 3½ X 25 sq. mm (28mm) Each 0 329.78 -
4.5 9.1.21 3½ X 35 sq. mm (32mm) Each 2 388.78 777.56
4.6 9.1.22 3½ X 50 sq. mm (35mm) Each 0 435.14 -
4.7 9.1.23 3½ X 70 sq. mm (38mm Each 0 493.08 -
4.8 9.1.24 3½ X 95 sq. mm (45mm) Each 0 619.52 -
4.9 9.1.25 3½ X 120 sq. mm (45mm) Each 0 645.86 -
4.10 9.1.26 3½ X 150 sq. mm (50mm) Each 0 734.36 -

45 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST
Name of Work:- Construction of MULTIPURPOSE HALL at JNV, DHULE (Maharashtra)
DSR- Rate (DSR- Rate DSR- NS Rate Amount (DSR- Amount (DSR NS AMOUNT (In
S.N. DESCRIPTION OF ITEM UNIT QUANTITY 2023) 2022 + GST 2023)
2022 (In ₹) 2022+GST 5.36%) ₹)
3½ X 185 sq. mm (57mm) (In ₹) 5.36% (In ₹)
4.11 9.1.27 Each 0 921.90 -
4.12 9.1.29 3½ X 240 sq. mm (62mm) Each 0 1,082.05 -
4.13 9.1.30 3½ X 300 sq. mm (70mm) Each 0 1,259.05 -
Total - 14,600.79 36,495.38

External Lights
Supplying, installation, testing and commissioning of 65W LED Street Light IP66
LED with High performance having system lumen output of minimum 9900
lumens, contemporary designed housing made of die-cast aluminium, with street
1 NSI-1 Nos
optic LENS for uniform light distribution. PF better than 0.9, CRI better than 70
complete with all accessories. Wipro Cat No.: LR 02-102-XXX-57-G2 Street light
4 - 7,634.33 30,537.32
SITC of 6m ht. GI pole alongwith control box,6A MCB etc. as required for St. height
2 NSI-2 Nos
4 - 10,000.00 40,000.00

Total - - 70,537.32

46 Digitally signed by SHUBHAM


GOEL
Date: 2024.08.08 16:07:52 IST

You might also like