NSPanel

User manual V1.1

NSPanel-US NSPanel-EU

Smart Scene Wall Switch

Shenzhen Sonoff Technologies Co., Ltd. English

Product Introduction

3.5" TFT Touch Screen Temperature Sensor

Reset Button
NSPanel-EU

Pairing button/Physical switch

Temperature Sensor
NSPanel-US 3.5" TFT Touch Screen Reset Button

Pairing button/Physical switch

The device weight is less than 1 kg. The installation height of less than 2 m is recommended.

Features
NSPanel is a dual-channel smart touch control panel integrating three interactive methods, screen
touching, voice control and App control. Users can control the device types including smart switch
and plugs (heating/cooling) under the eWeLink account. Users are able to control multiple smart
devices through adding widgets on their smart phones, such as turn on/off, schedule on/off the
connected devices and share them with families to control.

TFT

Remote Control Single/Countdown Voice Control Share Control 3.5" TFT Touch Screen Adding Widgets
Timing

Smart Scene Thermostat Inching Mode Interlock Group Control LAN Control

1
Shenzhen Sonoff Technologies Co., Ltd. English

Operating Instruction

1. Power off

ON OFF

ON OFF

ON OFF

ON OFF

Please install and maintain the device by a professional electrician. To avoid electric shock
hazard, do not operate any connection or contact the terminal connector while the device
is powered on !

2. Wiring instruction
Light fixture wiring instruction:

L1 Out L In 100-240V AC
N N L2 Out N

NSPanel-EU

L Out L Out L In N

L1 Out L In 100-240V AC
N N L2 Out N

NSPanel-US

L Out L Out L In N

Make sure all wires are connected correctly.

2
Shenzhen Sonoff Technologies Co., Ltd. English

3. Download the eWeLink App

eWeLink

eWeLink

Android™ & iOS

4. Power on

Please add devices with Bluetooth pairing in eWeLink app

After powering on, the device will enter the bluetooth pairing mode during the first use.
The screen status is shown in the above image.

5. Add the device

Add Device All devices

Quick Pairing
Available for eWeLink support devices

Scan QR code Sound Pairing

Available for camera
Available for GSM and other devices that
and other devices support this pairing
with QRcode. method.

Bluetooth Pairing
Available for bluetooth
connection.

Tap “+” and select “bluetooth pairing” , then operate following the prompt on the App.

3
Shenzhen Sonoff Technologies Co., Ltd. English

Operation Guide

Drop down
Settings of the screen brightness and sleep time

15:00 6/9 Fir

15:00
-15℃ Z Sleep 1 Minute >

Swipe right
After adding temperature controller function in the App, you can set the added temperature
controller on the device.

15:00 6/9 Fir

15:00
28.5 ℃
-15℃ A

- +

Swipe left
After adding widgets in the App, you can control the added widgets on the device.

15:00 6/9 Fir

> > >

15:00
GSM开关 双⾊灯 多通道设备 多通道设备

-15℃

4
Shenzhen Sonoff Technologies Co., Ltd. English

Bind Temperature Control Device

There is a built-in temperature sensor in the NSPanel to monitor the room temperature and you
can maintain the room temperature by controlling the cooler/heater, which is connected with
smart switches or smart plus and these devices are required to pair with eWeLink App.

Access the NSPanel interface in the App and tap “Thermostat” to select the devices in the Action
device list. All the listed devices are supported to bind with the Thermostat (including two
NSPanel channels). You can only select one device or one channel of the multi-channel device
to execute and then choose heater or cooler as the Device type.

NSPanel Thermostat Thermostat

Sclect
action
device Choose
Device

BASICR3 Heater

T2UK2C Cooler

27℃ S31

S26

Channel1 Channel2

Thermostat

Next Done
Thermostat Schedule Timer Loop
Timer

Active the Thermostat after selecting the Action device and Device type, then you can see there
are two modes to control the temperature which are Manual mode and Auto mode.

Manual mode:
Allow you to adjust the temperature manually whenever you want and then the Thermostat will
execute to maintain the manual setting temperature.

Auto mode:
Allow you to set 6 target temperature at most by tapping “Add” to set the temperature respectively.
Once set, all setting will execute automatically at certain time duration and cannot be controlled
manually unless switched to the Manual mode. The binding devices will turn off when they are
out of schedule.

Actual room temperature will be ±1℃. For example, the setting temperature is 26℃ but the
actual temperature range is between 25℃ and 27℃.

5
Shenzhen Sonoff Technologies Co., Ltd. English

Add Widgets
NSPanel can be added 8 widgets in the screen for Quick Control. The form of widget can be single
device, group devices of the congeneric devices and Tap to Perform Scene. In addition, you can
control more features of the multi-gang and lighting devices in the secondary interface.

Save

NSPanel Device
Settings Widgets Add
widgets Save

Inching
Settings
BASICR3

Interlock

T2UK2C
Temperature
unit

27℃
Widgets
Widgets S31

Screen
settings
S26

Device
info

B05-F-A19
Manufacturer SONOFF
Add
Model NSPanel L2
Lite
Channel1 Channel2 You
may
add
widgets
to
control
device
on
the
panel.

Device
ID 10013831f3

FW
Name E32-MSW-NX

Delete
device

Thermostat Schedule Timer Loop
Timer

Specifications

Model NSPanel-EU, NSPanel-US

Input 100-240V ~ 50/60Hz 4A Max
Output 100-240V ~ 50/60Hz 2A/Gang 4A/Total
150W/110V/Gang，300W/110V/Total
LED load
300W/220V/Gang，600W/220V/Total
Wi-Fi IEEE 802.11 b/g/n 2.4GHz

Bluetooth Standard 4.2 BLE

Screen Size 3.5" (Capacitive Touch Panel)
Screen Resolution 480*320px
Operating systems Android & iOS

Shell materials PC V0+CRS+Toughened Glass

NSPanel-EU: 86x86x41.7mm
Dimension
NSPanel-US: 120x74x41.7mm

6
Shenzhen Sonoff Technologies Co., Ltd. English

Re-establish Pairing of the NSPanel

When you want to change the NSPanel's account or connected WIFI, it requires you to pair the
NSPanel again. Press any bottom of the device for 5s until the screen indicates that it had
entered into Bluetooth pairing mode and then release. Now the NSPanel is available for
Bluetooth pairing in the eWeLink App.

15:00
-15℃
Please add devices with Bluetooth pairing in eWeLink app

The device will exit the bluetooth pairing mode if not paired within 3mins.

Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory setting.

Common Problems

Fail to pair Wi-Fi devices to eWeLink App

1. Make sure the device is in pairing mode. After three minutes of unsuccessful pairing, the
device will automatically exit pairing mode.
2. Please turn on location services and allow location permission. Before choosing the Wi-Fi
network, location services should be turned on and location permission should be allowed.
Location information permission is used to obtain Wi-Fi list information. If you click Disable,
you will not be able to add devices.
3. Make sure your Wi-Fi network runs on the 2.4GHz band.
4. Make sure you entered a correct Wi-Fi SSID and password, no special characters contained.
Wrong password is a very common reason for pairing failure.
5. The device shall get close to the router for a good transmission signal condition while pairing.

7
Shenzhen Sonoff Technologies Co., Ltd. FCC Warning

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance
could avoid the user ’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance20cm
between the radiator & your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.

8
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type
NSPanel-EU, NSPanel-US is in compliance with Directive 2014/53/EU.The full text of the EU
declaration of conformity is available at the following internet address:
https://sonoff.tech/usermanuals

Shenzhen Sonoff Technologies Co., Ltd.

1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China
ZIP code: 518000 Website: sonoff.tech

MADE IN CHINA