Open Source Electronic Prototyping Platform

Create With No Limit

version 2.0
Hardware and Software
for creating
interactive projects

www.osepp.com
/OSEPP.ArduinoCompatible @DIY_OSEPP
 TABLE OF CONTENTS
Starter Kits
101 Arduino Basics................................................................................. 7 Voltage Sensor Module ........................................................................... 36
101 Arduino Basics Companion Kit............................................................ 8 Ultrasonic Sensor Module ........................................................................ 36
201 Arduino Basics................................................................................. 9 Passive Infrared Sensor (PIR) Sensor Module, added mounting holes on PCB .. 37
101 Sensor Basics Starter Kit ................................................................... 10 PING Ultrasonic ...................................................................................... 37
101 Robotic Basics ................................................................................. 11
Osepp Stem Kit 1.................................................................................... 12 Accessories
OseppBlock IDE ...................................................................................... 13 F/F, M/F, and M/M Premium Jumpers – 6” ............................................. 39
4-Pin I2C Connector F/F – 8” ................................................................. 40
Mechanical Kits & Parts 4-Pin I2C Connector M/F – 8” ................................................................ 40
Robotic Functional Kit .............................................................................. 15 4-Pin I2C Connector M/M – 8” ............................................................... 40
2-Wheel Balancing Mechanical Kit ............................................................. 15 Barrel Jack to 2-pin JST ........................................................................... 40
Triangular Tank Mechanical Kit .................................................................. 16 USB Barrel Jack Adapter .......................................................................... 41
Tank Mechanical Kit ................................................................................ 16 3 Pin Jumper Cable................................................................................. 41
Tank Track Set with Axles (40 Pack) ......................................................... 17 Battery Holder........................................................................................ 41
Double Beam -06 Set ............................................................................. 17 DC Barrel Jack Adapter – Female.............................................................. 41
Double Beam - 08 Set ............................................................................ 18 DC Barrel Jack Adapter – Male ................................................................. 42
Double Beam - 09 Set ............................................................................ 18 Arduino Stackable Header – 6 pin – 8 pin – 10 pin ................................... 42
DC Motor-25 Wheel Kit ........................................................................... 19 Arduino Stackable Header Kit ................................................................... 43
RIM-90-T Kit .......................................................................................... 19 Break Away Headers – Long – Straight..................................................... 43
Female Headers ..................................................................................... 43
Breadboard 830 Tie Points ...................................................................... 44
Motors & Gears ...................................................20 Breadboard 400 Tie Points ...................................................................... 44
Mini Breadboard Self Adhering ................................................................. 44
Sensor Modules Mini Push Button Switch .......................................................................... 44
4-Digit Touch Sensor Module .................................................................... 26 Momentary Push Button Switch ................................................................ 45
HC-06 Bluetooth Module ......................................................................... 26 Tactile Button Assortment ........................................................................ 45
Motor Encoder (set of 2) ......................................................................... 26 16x2 LCD Display ................................................................................... 45
Color Sensor Module ............................................................................... 27 LM35 Temperature Sensor Component ...................................................... 46
Compass Sensor Module ......................................................................... 27 Mini Photo Cell ...................................................................................... 46
Fan Motor Module .................................................................................. 28 Multi Colored LED Assortment Set ............................................................. 46
Flame Sensor Module ............................................................................. 28 2AA Battery Holder ................................................................................. 47
Humidity & Temperature Sensor Module .................................................... 28 2AA Battery Holder - 2/pcs ..................................................................... 47
Joystick Module ..................................................................................... 29 2C Battery Holder .................................................................................. 47
Line Follower Array ................................................................................. 29 9V Battery Clip ...................................................................................... 47
Accelerometer ADXL345 3 axis MEMS w/13 bit Resolution ......................... 29 9V Barrel Jack Adaptor ............................................................................ 48
Accelerometer & Gyro Breakout (Balancing Module) ................................... 30 Solid Copper Wire Single Strand Wire - BV0.12 (16ft) ................................ 48
IR Detector Module ................................................................................. 30 2-Conductor Wire Red/Black - 26AWG (16ft) ............................................ 48
IR Follower Module ................................................................................. 30 DC 12 0.5A Yellow On Off Mini Push Button .............................................. 49
IR Line Sensor Module ............................................................................ 31 DC 30 1A Black On Off Mini Push Button ................................................... 49
IR Proximity Sensor Module ..................................................................... 31 Terminal Block (10 pack) ........................................................................ 49
IR Receiver Module W/ REMOTE .............................................................. 32 Aluminum Heat Sink for Raspberry Pi - Low Profile (2 pieces) ....................... 50
LED Modules .......................................................................................... 32 Aluminum Heat Sink for Raspberry Pi - tall fin (2 pieces) ............................. 50
Light Sensor Module ............................................................................... 33 Premium Copper Heat Sink for Raspberry Pi (3 pieces) ................................ 50
LM35 Temperature Sensor Module ........................................................... 33 OSEPP - 2.55” Press Fit Wheel (2 pack).................................................... 51
MQ-3 Alcohol Gas Sensor Module ............................................................. 33 RGB (tri-color) 10mm LED (10 pack)......................................................... 51
Passive Infrared Sensor (PIR) Module ........................................................ 34 10mm LED ( 2 x 6 colors )...................................................................... 51
Piezo Sensor Module .............................................................................. 34 Vibration Motor (2 pack)......................................................................... 52
Potentiometer Module ............................................................................. 34 Solder-able Breadboard - Mini ................................................................... 52
Push Button Module ............................................................................... 35 Solder-able Breadboard............................................................................ 52
Reed Switch Sensor Module ..................................................................... 35 Solder-able Breadboard - Large ................................................................. 52
Sound Sensor Module ............................................................................. 35 Snappable Protoboard.............................................................................. 53
Touch Sensor Module .............................................................................. 36 Breadboard - Translucent Self-Adhere (Clear) .............................................. 53
Main Controller Boards
Mega 2560 R3 Plus................................................................................ 55
OSEPP Uno R4 Plus................................................................................. 55
Fio........................................................................................................ 55
Pro........................................................................................................ 56
Pro Mini................................................................................................. 56
Bluetooth............................................................................................... 56
Nano..................................................................................................... 57
OSEPP - UNO MAX Microcontroller (Arduino Compatible)............................... 57

Shield Boards
16x2 LCD Display & Keypad Shield........................................................... 59
I2C Expansion Shield .............................................................................. 59
microSD Shield ...................................................................................... 60
Motor and Servo Shield ........................................................................... 60
Proto Shield ........................................................................................... 61
Sensor Shield ........................................................................................ 61
Motor Shield - 6612 ............................................................................... 61

Breakout & Driver Boards

FTDI Breakout Board................................................................................ 63
Motor Driver Module................................................................................ 63
Stepper Motor & Driver............................................................................ 63
Real-time Clock & microSD Breakout.......................................................... 64
Moisture & Humidity Breakout.................................................................. 64
TB6612 Motor Driver (Arduino Compatible)................................................ 64
Servo Power Board (unassembeld with pins and male servo leads)................ 65
Servo Power Board (unassembeld with full pins)......................................... 65
Servo Power Board (assembled with pins and male servo leads).................... 65

Solar Cells ............................................................66

3
 WHO WE ARE
We are a Canadian company with our head office in British
Columbia, Canada. We design and manufacture a line of
Arduino compatible products. with a focus on new to novice
users.

Our category of products include Kits, Sensors, Breakout

Boards(s), Shield Boards, Accessories, and Main Boards.
 Starter Kits

FRIENDLY RISK FREE PARTNERSHIP

Becoming a distributor for us is easy and most important of all RISK FREE. We treat our
distributors as partners and not competitors. Our products are solely sold through YOU.

Guaranteed Sales Policy

It means exactly that. We guarantee that our products will sell. If for whatever reason they
don’t, give it back to us for full credit or full refund.

No Case Quantity Requirements

Being that we would take back any product that don’t sell, we see no point in enforcing case
quantities, so we don’t. Only buy what you want—even if it is just one unit.

Low Prepaid Freight

If your order is $500 or more, we will pay for the shipping cost. Our warehouse is located in
Canada but you don’t have to worry about that. We will look after all clearance fees or duties
(if applicable)—USA only.
Orders under $500 are prepaid and charged. We will still look after all clearance and any
applicable duties for cross boarder shipments (USA only).

Low Minimum Order

Although we enforce a minimum dollar for each order, it is only $250. Our shipping department
would be upset otherwise.

Tech Support
You don’t have to know how to use our products to be a distributor. We have a team of
technical staff who will look after all after sales support for you. All emails to support@osepp.
com are guaranteed to be responded to before the end of the same business day. In most
cases, it is responded to in the first 2 hrs!.

5
Starter Kits

STARTER KITS
There are over 300,000 Arduino compatible products in the
market. It can be overwhelming for anyone wanting to learn
about Arduino and what it can do. This was the idea behind
our Starter Kit Series.

Our focus is to teach new or novice users about Arduino by the

use of easy to follow lessons with step by step instructions

NO PRIOR ELECTRONICS KNOWLEDGE REQUIRED!

Starter Kits Starter Kits Series

101 Arduino Basics

• Discover Arduino through EASY and FUN lessons Step-by-step instructions with diagrams
• No prior electronics knowledge required
• Kit comes with everything you need to build your own:
• Volt Meter • Buzzer Circuit and play melody • LED Game • INCLUDES the OSEPP UNO R3 PLUS board!

Key Features
Tutorial 1: Loading the First Sketch
Tutorial 2: Controlling Digital Outputs
Tutorial 3: Using Digital Input
Tutorial 4: An LED Game
Tutorial 5: Building Voltage Meter
Tutorial 6: Using Buzzer to Play a Melody
Tutorial 7: Counting Down with a 7 Segment LED
Tutorial 8: Powering the UNO R3 PLUS Using Batteries

Kit Content
OSEPP UNO R3 Plus................................................................................................................................................. 1
6 feet USB type A to mini-B............................................................................................................................ 1
Tact push switch 6mm x 6mm – through hole ................................................................................ 2
DIP switch 4 position – through hole ..................................................................................................... 1
1Kohm potentiometer (variable resistor) – long pins................................................................... 1
10Kohm potentiometer (variable resistor) – long pins ............................................................... 1
330 ohm axial resistor, 1/2W, 5% ..............................................................................................................20
1 kohm axial resistor, 1/2W, 5% ................................................................................................................... 5
10kohm axial resistor, 1/2W, 5% .................................................................................................................. 5
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA ................................................ 2
LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA ......................................... 2
LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA ............................................. 2
Two digits 7-segment LED – RED ............................................................................................................... 2
Buzzer, 5Vo-p .......................................................................................................................................................... 1
NPN transistor ....................................................................................................................................................... 2
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) .............................................. 1
6 inches male-to-male jumper wires (red) ...................................................................................... 10
6 inches male-to-male jumper wires (black) .................................................................................. 10 Product Info
6 inches male-to-male jumper wires (white) ................................................................................ 10
Stock Code ARD-01
6 inches male-to-male jumper wires (grey) .................................................................................... 10
6 inches male-to-male jumper wires (blue) ................................................................................... 10 Description ARDUINO BASICS
4x AA battery enclosure with DC power jack and ON/OFF switch, cable length 4” ....... 1 STARTER KIT w/ UNO-03
2cm x 2cm x 3mm thick double side tape ........................................................................................... 2 Package Size 10” x 7” x 2”
Booklet – Arduino UNO diagram + basic electronic theory............................................................. 1
Kit container ........................................................................................................................................................... 1 UPC 899262000367

7
Starter Kits Starter Kits

101 Arduino Basics Companion Kit

• Discover Arduino through EASY and FUN lessons Step-by-step instructions with diagrams
• No prior electronics knowledge required
• Kit comes with everything you need to build your own:
• Volt Meter • Buzzer Circuit and play melody • LED Game • OSEPP UNO R3 PLUS board Not Included.

Key Features
Tutorial 1: Loading the First Sketch
Tutorial 2: Controlling Digital Outputs
Tutorial 3: Using Digital Input
Tutorial 4: An LED Game
Tutorial 5: Building Voltage Meter
Tutorial 6: Using Buzzer to Play a Melody
Tutorial 7: Counting Down with a 7 Segment LED
Tutorial 8: Powering the UNO R3 PLUS Using Batteries

Kit Content
6 feet USB type A to mini-B............................................................................................................................ 1
Tact push switch 6mm x 6mm – through hole ................................................................................ 2
DIP switch 4 position – through hole ..................................................................................................... 1
1Kohm potentiometer (variable resistor) – long pins................................................................... 1
10Kohm potentiometer (variable resistor) – long pins ............................................................... 1
330 ohm axial resistor, 1/2W, 5% ..............................................................................................................20
1 kohm axial resistor, 1/2W, 5% ................................................................................................................... 5
10kohm axial resistor, 1/2W, 5% .................................................................................................................. 5
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA ................................................ 2
LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA ......................................... 2
LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA ............................................. 2
Two digits 7-segment LED – RED ............................................................................................................... 2
Buzzer, 5Vo-p .......................................................................................................................................................... 1
NPN transistor ....................................................................................................................................................... 2
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) .............................................. 1
6 inches male-to-male jumper wires (red) ...................................................................................... 10
6 inches male-to-male jumper wires (black) .................................................................................. 10 Product Info
6 inches male-to-male jumper wires (white) ................................................................................ 10
Stock Code ARD-01B
6 inches male-to-male jumper wires (grey) .................................................................................... 10
6 inches male-to-male jumper wires (blue) ................................................................................... 10 Description ARDUINO COMPANION
4x AA battery enclosure with DC power jack and ON/OFF switch, cable length 4” ....... 1 KIT W/O UNO BOARD
2cm x 2cm x 3mm thick double side tape ........................................................................................... 2 Package Size 10” x 7” x 2”
Information sheet – Arduino UNO diagram + basic electronic theory...................................... 1
Kit container ........................................................................................................................................................... 1 UPC 899262000411
 Starter Kits

201 Arduino Basics

• Discover Arduino through EASY and FUN lessons
• Step-by-step instructions with diagrams
• No prior electronics knowledge required
• Kit comes with everything you need to build 15
projects across 8 categories:

Key Features
Tutorial 1: Temperature
Tutorial 2: Light
Tutorial 3: LEDs
Tutorial 4: Sound
Tutorial 5: Ultrasonic
Tutorial 6: Servo Motors
Tutorial 7: Stepper Motors
Tutorial 8: LCD

Comes with one bonus project to help combine

skills learnt in previous lessons into new projects

Kit Content
OSEPP UNO R3 Plus ................................................................................................................................................ 1
6 feet USB type A to mini-B ........................................................................................................................... 1
Tact push switch 6mm x 6mm – through hole ................................................................................ 2
10K ohm linear potentiometer (variable resistor) – long pins ............................................... 1
100 ohm axial resistor, 1/2W, 5% ................................................................................................................ 5
330 ohm axial resistor, 1/2W, 5% ..............................................................................................................20
1k ohm axial resistor, 1/2W, 5% ................................................................................................................... 5
10k ohm axial resistor, 1/2W, 5% ................................................................................................................ 5
1M ohm axial resistor, 1/2W, 5% .................................................................................................................. 2
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA ................................................ 2
LED through hole – Yellow, 8.7mm height, ~2V drop, ~10-20mA ......................................... 2
LED through hole – Green, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – White, 8.7mm height, ~2V drop, ~10-20mA .......................................... 2
LED through hole – Blue, 8.7mm height, ~2V drop, ~10-20mA ............................................. 2
Buzzer, 5Vo-p .......................................................................................................................................................... 1
Speaker, 8-ohm ..................................................................................................................................................... 1
LM35 Temperature Sensor ............................................................................................................................... 1
Photo Cell .................................................................................................................................................................. 1
LCD 16×2 Character Display ............................................................................................................................. 1
Ultrasonic Range Finder .................................................................................................................................. 1
Servo Motor ............................................................................................................................................................. 1
Stepper Motor ........................................................................................................................................................ 1
Stepper Motor Driver ......................................................................................................................................... 1
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) .............................................. 1
2pin Screw Terminal ......................................................................................................................................... 2
6 inches male-to-male jumper wires (red) ...................................................................................... 10 Product Info
6 inches male-to-male jumper wires (black) .................................................................................. 10 Stock Code ARD-02
6 inches male-to-male jumper wires (white) ................................................................................ 10
6 inches male-to-male jumper wires (grey) .................................................................................... 10 Description 201 ARDUINO BASICS
6 inches male-to-male jumper wires (blue) ................................................................................... 10 STARTER KIT W/UNO-03
6 inches male-to-female jumper wires (white) ............................................................................ 10 Package Size 10” x 7” x 2”
Arduino Basics 201 Tutorial book ................................................................................................................ 1
Kit container............................................................................................................................................................ 1 UPC 667510000007
9
Starter Kits

101 Sensor BasicsBasics

201 Arduino Starter Kit

COMPONENT LIST
• OSEPP Sensor Shield • Light Sensor Module
• 3-Pin Jumper Wires • Temperature Sensor Module Product Info
• mini USB Cable • Passive Infrared Sensor Module Stock Code SENS-01
• 9 Volt Battery Adaptor • Piezo Sensor Module
• Female to Female Jumper Cables • Potentiometer Sensor Module Description 101 Sensor Basics Starter Kit
• 4-Digit Touch Sensor Module • Push Button Module Package Size 10” x 7” x 2”
• Fan Motor Module • Reed Switch Sensor Module
UPC 667510001400
• Flame Sensor Module • Voltage Sensor Module
• LED Modules • Ultrasonic Sensor Module

LESSONS
Lesson 1 – LEDs and Buttons : learn how to control LEDs with push Buttons
Lesson 2 – Musical Buzzer: Learn how to make a musical buzzer with your own musical notes.
Lesson 3 – Potentiometer: control the pitch of the musical buzzer and adjust the brightness of an led.
Lesson 4 – Fan Motor: adjust the direction and speed of a motor with a potentiometer knob and button.
Lesson 5 – Ping Sensor: change direction of a motor when you are within proximity of the motor using the ping sensor.
Lesson 6 – Reed Switch: turn an LED on and off based on the state of a reed switch.
Lesson 7 – PIR sensor: construct a smart motion sensing system that turns on an led based on movement.
Lesson 8 – Flame Sensor: create a smoke / fire alarm with the flame sensor.
Lesson 9 – Temperature Sensor: measure the temperature around you with the temperature sensor.
Lesson 10 -Light Sensor: detect the light surrounding you with the light sensor.
Lesson 11 -Sound Sensor: adjust the brightness of an led based on the ambient nose around you with the sound sensor.
Lesson 13 – 4-digit touch sensor: create a security access keypad with the 4 digit touch sensor.
Lesson 14 – Environmental Monitor: create an environmentally aware system with the sensors you have previously used
Lesson 15 – Security System : create a smart security system with sensors previously used.
 Starter Kits

101 Robotic Basics

Autonomous Function * Light Following * Object Avoidance

This has to be one of the ‘coolest’ looking kits in the Arduino market. Custom designed aluminum chassis with a nice
protective black coat that prevents the surface from scratching and oxidizing. The strategically placed holes on the chassis
allows you to easily attach more sensors or other devices to the frame for more functions.
Kit comes with everything you need to make your own autonomously operating robot. Not only that, it is smart enough to
‘chase’ after the brightest light in the room. With this function, you can use a flash light as your remote! If you prefer using an
IR remote, that works too.
We have included lessons that teaches you how to use two IR Detectors to give the robot object avoidance ability.
The booklet that comes with this kit is close to 100 pages thick! Lots of great info, lessons, and codes.

Kit Content
Uno R3 ......................................................................................................................................................................... 1
L298N Motor Driver............................................................................................................................................... 1
IR Follower................................................................................................................................................................ 1
IR Receiver ................................................................................................................................................................ 1
IR Detector................................................................................................................................................................ 2
Top Chassis Frame................................................................................................................................................. 1
Bottom Chassis Frame........................................................................................................................................ 1
Ball Caster Wheel Set Motor Mount Set.................................................................................................. 2
Motor Assembly Set............................................................................................................................................ 2
Standoffs 3 cm....................................................................................................................................................... 8
Standoffs 1cm........................................................................................................................................................13
Wheel ......................................................................................................................................................................... 2
Screw B 6 mm.......................................................................................................................................................20 (main board screws)
Battery Holder Screw Set Nuts....................................................................................................................14 (for motor & battery holder)
Jumper wire 16 cm............................................................................................................................................... 2 (for motor driver to a Uno ISP)
Mini USB Cable x 1 F/F Jumper 10cm.......................................................................................................... 6 (for IR Detector/Receiver)
Screw Cap ................................................................................................................................................................. 2
Wire............................................................................................................................................................................... 1
M/F Ribbon Jumper Wires 10cm.................................................................................................................20
Remote Control...................................................................................................................................................... 1
ON/OFF Switch ........................................................................................................................................................ 1 with screw
Screw A 6 mm.......................................................................................................................................................20 (for chassis frame)
Plastic Washer........................................................................................................................................................ 4 (between UNO & standoffs)

Product Info
Stock Code ROB-01
Description OSEPP 101 ROBOTIC BASICS KIT
Package Size 10” x 7” x 2”
UPC 667510001011

Assembly is required and part of the learning process

11
Starter Kits

microSD
OSEPP Stem Kit 1 Shield
When used with our new OseppBlock integrated development environment (IDE), this is the ultimate tool for anyone to
learning how to code. Whether you are in Elementary school, University, a parent, teacher, or a grandparent, you can learn to
code in the Arduino language. Absolutely no experience required.

The OSEPPTM Stem Kit 1 will teach you the eight most commonly used inputs and outputs in the Arduino environment.
Once you have mastered these functions using our OseppBlock IDE, you will be well on your way to programming using the
Arduino IDE without the graphical ‘block’ support.

FEATURES:
• 100% Arduino Compatible
• Learn the most common Arduino functions with one board!
• Minimal cable ‘jumping’ required. More time spent on actual
LEARNING!
• 8 Output Devices
• 8 Input Devices
• Includes graphical TUTORIAL BOOKLET (for use with OseppBlock IDE)
• For ages 10+
• No assembly required
• Includes protective case
• Includes OSEPP UNO R4 Plus Board (microcontroller)

INPUT DEVICES: OUTPUT DEVICES:

• Push Buttons • LEDs
• Potentiometers • Servo Motor Product Info
• Slide Potentiometer • Stepper Motor Stock Code STEM-01
• Ultrasonic Sensor • Fan Motor (DC)
• Passive Infrared Sensor (PIR) • LCD Display Description OSEPP STEM KIT 1
• Light Sensor • Buzzer
Packaging Size 10” x 7” x 2”
• Sound Sensor • Speaker
• LM35 Temperature Sensor • RGB (red, green and blue LED) UPC 667510001646

All the devices listed above are on ONE circuit board. This way, minimal time is spent ‘jumping’ cables from one module to
the next and more time is spent on actual LEARNING. It is as easy as learning the ABCs.

This makes the perfect gift for the elementary student in your household to get them interested in coding and electronics. A
stepping block (no pun intended) into a career in Computer Sciences.

Lessons in Tutorial Booklet (INCLUDED):

Chapter 1: Digital & Analog IO Chapter 2: If/Else command, For Loop command and While
Loop Command
1. Blinking an LED

2. Buzzer and LED 1. Turn on LED with button

3. Turning on a Fan Motor 2. Alarm System with PIR (Passive Infrared)

4. Display your name on Serial Monitor 3. LED Control by Light Sensor

5. Button state and PIR state 4. Tone Notes with Buttons

6. Display text on LCD 5. Fade LEDs

7. Display Slider Potentiometer value on LCD 6. Fading multiple LEDs

8. Display light intensity value on LCD 7. Cycle 10 LEDs

9. Tone melody 8. Blink LED and Melody

 Starter Kits

Chapter 3: Hardware Chapter 3: Hardware

1. RGB LED Basics 1. RGB LED Basics

2. Mixing RGB Colors with POTS (potentiometers) 2. Mixing RGB Colors with POTS (potentiometers)

3. Servo Basics 3. Servo Basics

4. Control Servo with Slide POT 4. Control Servo with Slide POT

5. Stepper Motor Basics 5. Stepper Motor Basics

6. Display Temperature Value on LCD 6. Display Temperature Value on LCD

7. Sound Sensor Basics 7. Sound Sensor Basics

8. Ultrasonic Basics 8. Ultrasonic Basics

9. Set Fan Forward and Backward 9. Set Fan Forward and Backward

microSD
OseppBlock IDE Shield
Learn to code with our easy to use drag and drop interface. This is where it all starts. Think of it as the ABC’s of coding.
Whether you are 8 years old or 80 years old, if you have not coded before and want to learn, this is where it all begins.

Our OseppBlock IDE is based on the Arduino platform (https://arduino.cc). We use a graphical block system to demystify
coding concepts. As you drag the blocks to create projects, Arduino code syntax is automatically generated on the same
screen for you to reference.

We have developed a STEM KIT 1

hardware board to be used with
OseppBlock as an introduction
electronics. You will be able to
learn the 16 most commonly used
Arduino functions using various
input and output devices.

The STEM KIT 1 is an optional

hardware tool. If you have a good
understanding of Arduino, you can
use our OseppBlock IDE with any
compatible hardware.

Once you have mastered our DRAG

n PLAY interface with the help of
our Stem Kit 1, you can graduate
into the Arduino IDE where you
simply code with no block support.
OseppBlock IDE supports exporting
your blocks code into the Arduino
environment with the push of a

Below is an interactive ‘web’ version of the OseppBlock IDE. See for yourself how easy it is to use:

www.osepp.com/block/
13
Mechanical Kits & Parts

MECHANICAL
KITS & PARTS
 Mechanical Kits & Parts

Robotic Functional Kit

The Robotics Functional Kit adds smarts and control to your Mechanical Kits! This kit includes an OSEPP UNO R3 PLUS micro
controller board, a high voltage TB6612 Motor Shield and sensors that gives users the most commonly requested robotic
functions. All of the assembly instructions and code are open source and downloadable below.

• Bluetooth (HC-06) Module – This module allows the user

to control their project using their Android smart device.
Download our Android App for free below.

• Ultrasonic Sensor – This module provides object

avoidance function.

• IR Follower – With this module, you can turn your flash

light into a remote control.

• Line Sensor – This is no typical line sensor. Most line

sensors in the market has one sensor so it is sensitive to the
width of the line it is trying to follow. Our sensor module
Product Info has FIVE sensors so it can follow lines of different widths
Stock Code MECHF-01 and with increased accuracy. Works best following black
lines on white background.
Description Robotic Functional Kit
Package Size 8.3” x 6” x 2” • 100% Arduino Compatible
UPC 667510001516 • Add smart sensing functions to your Mechanical Kits

2-Wheel Balancing Mechanical Kit

The 2-Wheeler Balancing Mechanical Kit can handle all of your off road / all terrain needs! All of our Mechanical Kits are
covered with a corrosion resistant coating. The 2-Wheeler requires minimum parts to create and easy to control!

• 100% Arduino Compatible

• Aerospace grade aluminum
• Corrosion resistant coating
• Includes MPU6050 Balancing Module included
• Everything you see in image is whats included – ASSEMBLY
REQUIRED
• Operating voltage output : 9 volts ( x6 AA Batteries)
• 9v DC motors included
• Includes MPU6050 Balancing Module

Product Info
Stock Code 2WBAL-01
Description 2-Wheel Balancing Mechanical Kit
Package Size 9” x 8.3” x 19”
UPC 667510001509

15
Mechanical Kits & Parts

Triangular Tank Mechanical Kit

The Triangular Tank Mechanical Kit can handle all of your off road / all terrain needs! All of our Mechanical Kits are
covered with a corrosion resistant coating.

• 100% Arduino Compatible

• Aerospace grade aluminum & corrosion resistant coating
• Everything you see in image is whats included – ASSEMBLY REQUIRED
• Interchangeable parts for easy customization
• Optional tires / belt accessories for wheels
• Operating voltage output : 9 volts ( x6 AA Batteries)
• 100% compatible all OSEPP sensors
• High torque 9v DC motors included
• Suggested Accessories: OSEPP TB6612 Motor Driver and UNO Board
• THREE DIFFERENT CONFIGURATIONS: Triangular Tank, 90 Degree
Triangular Tank and Extended Regular Tank

Product Info
Stock Code TRITANK-01
Description Triangular Tank Mechanical Kit
Package Size 12” x 8.3” x 22.2”
UPC 667510001486

Tank Mechanical Kit

Ideal frame work to start creating your robotic project. The Tank Robotics Mechanical Kit can handle all of your off road /
all terrain needs! All of our mechanical parts are coated with an anodized finish to prevent from corroding. Enhance the
Tank with our Functional Robotics Kit or select your own sensors and micro controller.
• 100% Arduino Compatible
• Aerospace grade anodized aluminum
• Corrosion resistant coating
• Everything you see in image is whats included – ASSEMBLY
REQUIRED
• Optional tires / belt accessories for wheels
• Operating voltage output : 9 volts ( x6 AA Batteries)
• 100% compatible all OSEPP sensors
• 9v DC motors included
• Suggested Accessories: OSEPP TB6612 Motor Driver and UNO
Board

Product Info
Stock Code TANK-01
Description Tank Mechanical Kit
Package Size 12” x 8.3” x 19”
UPC 667510001493

16
 Mechanical Kits & Parts

Tank Track Set with Axles (40 Pack)

Hight quality silicone track set for tank mobility projects. Tracks
can be assembled into any length. Our silicone is high in tensile
strength and elasticity making it extra durable. This is required in
preventing the tracks from tearing.

Compatible with all OSEPP rims, LEGO Technic parts and MakeBlock
tracks and wheels.

Product Info
Stock Code TRAKX40
Description Tank Track Set with Axles (40 Pack)
Package Size 7” x 4”
UPC 667510001608

Double Beam -06 Set

Double beams are some of the most commonly used
parts when building projects. Our beams are made from
high strength aluminum and anodised to protect them
from corrosion. Not only are you getting the beams with
our kit, you get all required parts to build many different
configurations. It even comes with an allen key for your
convenience.

Compatible with: OSEPP Mechanical Kits, LEGO Technic parts

and MakeBlock.

Kit Content:

4 x Double Beam-06
4 x Beam Connectors
2 x Beam Connectors—long Product Info
1 x Plate A 3x6 Stock Code DB6WACC
1 x Plate B 3x6
Description Double Beam -06 Set
1 x Plate B 3x9
10 x HEXM4*8 Screws Package Size 7” x 4”
1 X Allen Key UPC 667510001622

17
Mechanical Kits & Parts

Double Beam -08 Set

Double beams are some of the most commonly used parts when
building projects. Our beams are made from high strength
aluminum and anodised to protect them from corrosion. Not
only are you getting the beams with our kit, you get all required
parts to build many different configurations. It even comes with
an allen key for your convenience.

Compatible with: OSEPP Mechanical Kits, LEGO Technic parts and

MakeBlock.

Kit Content: 4 x Double Beam-08

4 x Beam Connectors
2 x Beam Connectors—long
Product Info 1 x Plate A 3x6
1 x Plate B 3x6
Stock Code DB8WACC 1 x Plate B 3x9
Description Double Beam -08 Set 10 x HEXM4*8 Screws
1 X Allen Key
Package Size 7” x 4”
UPC 667510001585

Double Beam -09 Set

Double beams are some of the most commonly used
parts when building projects. Our beams are made from
high strength aluminum and anodised to protect them
from corrosion. Not only are you getting the beams with
our kit, you get all required parts to build many different
configurations. It even comes with an allen key for your
convenience.

Compatible with: OSEPP Mechanical Kits, LEGO Technic parts

and MakeBlock.

Kit Content: 4 x Double Beam-09

4 x Beam Connectors
2 x Beam Connectors—long
Product Info 1 x Plate A 3x6
1 x Plate B 3x6
Stock Code DB9WACC 1 x Plate B 3x9
Description Double Beam -09 Set 10 x HEXM4*8 Screws
1 X Allen Key
Package Size 7” x 4”
UPC 667510001615
 Mechanical Kits & Parts

DC Motor-25 Wheel Kit

This kit is all about convenience. It has everything you
need to have a motorized wheel assemble that is ready
to be installed to your projects. All aluminum pieces (rim,
motor bracket, terminal block) are extra strength and
anodised to prevent corrosion.

Compatible with all OSEPP mechanical kits, LEGO Technic

parts and MakeBlock parts and kits.

Kit Content: 1 x DC Motor-25mm w/ pcb

1 x DC Motor Bracket
1 x RIM-90T
1 x Shaft Connector
1 x Motor Cable
1 x Terminal Block
Product Info 2 x HEXM4*14
Stock Code DC25WRIM 2 x Headless Screw M3*10
Description DC Motor-25 Wheel Kit 2 x Flat Head Screw M3*8
2 x Plastic Ring
Package Size 7” x 4” 1 x Tire
UPC 667510001592

RIM-90-T Kit
This rim set is made from high strength aluminum with
an anodised coating to protect it from corrosion. We call
this set a kit because it not only comes with two rims, it
comes with everything you need to get it rolling (no pun
intended). We’ve even included two high quality high grip
silicone tires. For extra convenience, an allen key is also
included.

Compatible with all OSEPP rims, LEGO Technic parts and

MakeBlock tracks and wheels.

Kit Content: 2 x RIM-90T

2 x T-Shaft Connectors
4 x Flange Bearings
1 X Allen Key
2 x HEXM3*6 Product Info
2 X Nut M4 Stock Code RIMWACC
2 x Tires
Description RIM-90-T Kit
Package Size 7” x 4”
UPC 667510001639

19
Motors & Gears

Motors & Gears

Speed (sec/60°): 0.14 @6V, 0.12 @7.4V Speed (sec/60°): 0.12 @4.5V, 0.1@6V Speed (sec/60°): 0.14 @4.8V, 0.12@6V

Torque (Kg.cm): 0.5 @ 6V / 0.8 @ 7.4V Torque (Kg.cm): [email protected], 1.2@6V Torque (Kg.cm): [email protected], 6.5@6V
Size (mm): 19.8 x 8.4 x 21.3 Size (mm): 21.5 x 11.8 x 22.7 Size (mm): 40.8 x 20.1 x 38
Weight (g): 3.7 Weight (g): 6 Weight (g): 40

Product Info Product Info Product Info

Stock Code LS-S0307 Stock Code LS-0006 Stock Code LS-3006
Description Plastic Analog (Small) Description Plastic Gear Analog Description Plastic Gear Analog
Servo (medium) Servo - 360
Package Size 3.5” x 0.25” x 7” Package Size 3.5” x 0.5” x 7” Package Size 3.5” x 0.8” x 7”
UPC 667510001912 UPC 899262000206 UPC 899262000244

Speed (sec/60°): 0.1 @4.8V, 0.08@6V Speed (sec/60°): 0.16 @6V, [email protected] Speed (sec/60°): 1.5-3V 12000 RPM

Torque (Kg.cm): [email protected], 1.5@6V Torque (Kg.cm): 12.5@6V, [email protected] Torque (Kg.cm): [email protected], [email protected]

Size (mm): 22.3 x 11.8 x 26.3 Size (mm): 40.8 x 20.1 x 38 Size (mm): 22.9 x 12 x 25.4 mm

Weight (g): 9 Weight (g): 58 Weight (g): 13g

Product Info Product Info Product Info

Stock Code LS-0009AF Stock Code LS-8101F Stock Code LS-S8220
Description Metal Gear Digital Description Metal Gear Digital Description Metal Gear Digital
Servo Servo - 360 Servo - 90
Package Size 3.5” x 0.5” x 7” Package Size 3.5” x 0.8” x 7” Package Size 3.5” x 0.5” x 7”
UPC 899262000213 UPC 899262000251 UPC 667510001868
 Motors & Gears

Motor & Gear

Speed (sec/60°): 5000-10000 RPM Speed (sec/60°): 8000-12000 RPM Speed (sec/60°): 8000-12000 RPM

Torque (Kg.cm): N/A Torque (Kg.cm): N/A Torque (Kg.cm): N/A

Size (mm): 25 x 21mm Size (mm): 27 x 23.8 mm Size (mm): 30.5 x 23.8 mm
Weight (g): 19g Weight (g): 28g Weight (g): 42g

Product Info Product Info Product Info

Stock Code LS-00025 Stock Code LS-00026 Stock Code LS-00027
Description R140 1.5-3V 10000 RPM Description R260 3-6V 12000 RPM Description R280 3-6V 12000 RPM
Brushed DC Motor Brushed DC Motor Brushed DC Motor
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001691 UPC 667510001707 UPC 667510001714

Speed (sec/60°): 8000-12000 RPM Speed (sec/60°): 10000-15000 RPM Speed (sec/60°): 220 RPM

Torque (Kg.cm): N/A Torque (Kg.cm): N/A Torque (Kg.cm): N/A

Size (mm): 32.6 x 27.6 mm Size (mm): 50 x 35.8 mm Size (mm): N/A
Weight (g): 49g Weight (g): 160g Weight (g): N/A

Product Info Product Info Product Info

Stock Code LS-00028 Stock Code LS-00029 Stock Code LS-00041
Description R360 3-9V 12000 RPM Description R540 6-12V 15000 RPM Description High Torque Motor -
Brushed DC Motor Brushed DC Motor 220rpm@6V
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001721 UPC 667510001738 UPC 667510001851
21
Motors & Gears

Motor & Gear

Speed (sec/60°): 1.5-3V 12000 RPM Speed (sec/60°): 118 RMP Speed (sec/60°): 300 RMP

Torque (Kg.cm): N/A Torque (Kg.cm): N/A Torque (Kg.cm): N/A

Size (mm): 25 x 20.1 x 15.1 mm Size (mm): 50 x 40 x 30 mm Size (mm): 40 x 40 x 15 mm
Weight (g): 17g Weight (g): N/A Weight (g): N/A

Product Info Product Info Product Info

Stock Code LS-00024 Stock Code LS-00038 Stock Code LS-00039
Description F130 1.5-3V 12000 RPM Description C3 Gear Box A - Description 301 Gear Box B -
Brushed DC Motor 118rpm@3V 300rpm@3V
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001684 UPC 667510001820 UPC 667510001837

Assorted plastic gear set suitable for hobby, Assorted plastic gear set suitable for hobby, Suitable for hobby, models, science and
models, science and other projects. models, science and other projects. other projects.

Qty. 20pcs Qty. 20pcs Modulus 0.5

Modulus 0.5 Modulus 0.5 Bore Diameter 1.9mm/ 2.05mm
Bore Diameter 1.9mm Bore Diameter 2.05mm For 2mm shaft
For 2mm shaft For 2mm shaft

Product Info Product Info Product Info

Stock Code LS-00021 Stock Code LS-00022 Stock Code LS-00023
Description Assorted Plastic Description Assorted Plastic Twin Description Assorted Plastic Gear
Pinion Gear Set Gear Set Set
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001653 UPC 667510001660 UPC 667510001677
 Motors & Gears

Motor & Gear

Includes:
* 2 x 42T
* 2 x 28T
* 2 x 14T
* 1 x Crank Handle
** 5mm bore diameter

Product Info
Stock Code LS-00040
Description Large Plastic Gear Set (7 pcs)

Package Size 7” x 4” x 1”
UPC 667510001844

Suitable for hobby, models, science and other projects.

• Comparable to Servocity # 31311S20 • Rotation: Continuous
• Voltage Range: 4.8 – 7.2 Volts • Output Shaft Style: 25 tooth
• Stall Torque (6.0V): 4.1 kg.cm spline
• SStall Torque (4.8V): 3.2kg.cm
• JR Wire Configuration
• No-load Speed (6.0V / 4.8V):
0.19sec/60° / 0.23sec/60°
• Dimensions: 40.8*20.1*38mm
• Weight: 44g
Product Info
Stock Code LS-5010CR
Description OSEPP - 5010CR ECON Servo - 360
(Comparable to ServoCity# 31311S20)
Package Size 7” x 4” x 1”
UPC 667510002490

Suitable for hobby, models, science and other projects.

• Comparable to Servocity # 31311S00 • Rotation: 180° degrees
• Voltage Range: 4.8 – 7.2 Volts • Output Shaft Style: 25 tooth spline
• Stall Torque (6.0V): 4.1 kg.cm
• SStall Torque (4.8V): 3.2kg.cm
• JR Wire Configuration
• No-load Speed (6.0V / 4.8V):
0.19sec/60° / 0.23sec/60°
• Dimensions: 40.8*20.1*38mm
• Weight: 44g
Product Info
Stock Code LS-5010SR
Description OSEPP - 5010SR ECON Servo - 180
(Comparable to ServoCity# 31311S00)
Package Size 7” x 4” x 1”
UPC 667510002483
23
Motors & Gears

Motor & Gear

Suitable for hobby, models, science and other projects.

• Comparable to Servocity # 33485S20 • Dimensions: 40.8 *20.1*38mm

• Voltage Range: 4.8 – 7.2 Volts • Weight: 56g
• Stall Torque (6.0V): 11 kg.cm • Rotation: 360° degrees
• Stall Torque (4.8V): 9.4kg.cm • Output Shaft Style: 25 tooth spline
• JR Wire Configuration
• No-load Speed (6.0V / 4.8V):
0.14sec/60° / 0.17sec/60°

Product Info
Stock Code LS-955CR
Description OSEPP - 955CR High Torque Metal Gear Servo - 360, Comparable to
ServoCity # 33485S20
Package Size 7” x 4” x 1”
UPC 667510002506

Suitable for hobby, models, science and other projects.

• Comparable to Servocity # 3348S00 • Dimensions: 40.8 *20.1*38mm

• Voltage Range: 4.8 – 7.2 Volts • Weight: 56g
• Stall Torque (6.0V): 11 kg.cm • Rotation: 180° degrees
• SStall Torque (4.8V): 9.4kg.cm • Output Shaft Style: 25 tooth spline
• JR Wire Configuration
• No-load Speed (6.0V / 4.8V):
0.14sec/60° / 0.17sec/60°

Product Info
Stock Code LS-955SR
Description OSEPP - 955SR High Torque Metal Gear Servo - 180, Comparable to
ServoCity # 33485S00
Package Size 7” x 4” x 1”
UPC 667510002513
 Sensor Modules

SENSOR MODULES
One of our main focuses is to provide the largest sensor
selection in the market. This is a tall order but we plan on
adding 20 new sensors a year!

We do sell come sensor components but you will notice that

the majority of our sensors are designed as a module. This
simplifies the learning process by taking out the need for
breadboards and buying individual components.

OSEPP sensors are 100% Arduino compatible. This includes

any boards in the market. Whether your creating an
environmentally aware quadrocopter to a spatially aware
robot, our sensors are fully compatible.

25
Sensor Modules

4-Digit Touch Sensor Module

The touch sensor can detect when a person’s body conductivity touches a
pad.
• Operating voltage: 2.45v - 5.5v MAX
• Indicator LEDs on touch
• Capacitive touch
• Digital input

Product Info
Stock Code 4DTOUCH-01
Description 4-Digit Touch Sensor Module
Package Size 5” x 4” x 1”
UPC 667510001363

HC-06 Bluetooth Module

The HC-06 Bluetooth module is the simplest way to add bluetooth
communication to your next Arduino project! Allow your projects to
wirelessly communicate with each other! Whether you’re looking to
control an Arduino with a smart phone, or pair multiple Arduinos to each
other, this is the module for the job!

Product Info
• 100% Arduino Compatible
• Operating voltage: 3.3V – 5V MAX Stock Code BTM-01
(suggested 3.3 volts) Description HC-06 Bluetooth
• HC-06 Bluetooth Module Module
• Build-in 2.4GHz antenna
Package Size 5” x 4” x 1”
• Wirelessly control your Arduino
UPC 667510001561

Motor Encoder (set of 2)

The encoder modules are great for adding precise position sensing
capabilities. The encoder has a 11-pole circumference and two A3144
hall effect sensors. You can attach the encoder to any number of 25mm
equivalent motors. Ideal for making your own two-wheel balancing
robots.
• 4.5 – 24 Volt operation
• 11 pole encoder Product Info
• Two solid state 3144 Hall effect Stock Code ENC-01
sensors
Description Motor Encoder
• 100% Arduino compatible
(set of 2)
• Designed for 25mm DC motors
Package Size 5” x 4” x 1”
Package Content:
2 x Motor Encoders, 2 x Metal mounts (for 25mm motors), 2 x Magnets UPC 667510001530
 Sensor Modules

Color Sensor Module

A complete color detector, including a TSC3200 RGB sensor chip and 4 white
LEDs. Detects and measures a wide range of visible colors. Applications
include color sorting, color matching, and ambient light sensing.
• Power: (2.7V to 5.5V)
• Interface:Digital TTL
• High-Resolution Conversion of Light Intensity to Frequency
• Programmable Color and Full-Scale Output Frequency
• Power Down Feature
• Communicates Directly to Microcontroller

Product Info
Stock Code COLOR-01
Description OSEPP Color Sensor Module
Package Size 5” x 7.5” x 1”
UPC 667510001103

Compass Sensor Module

The OSEPP Compass Sensor Module is a 3-axis digital compass for low-field magnetic sensing. It utilizes the Honeywell
HMC5883L state-of-the-art high resolution magneto-resistive sensors, an ASIC containing amplification, automatic
degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables a compass heading accuracy to within 1-2
degrees.
The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines into
a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable daisy
chaining of multiple I²C devices together.
The OSEPP Compass Sensor Module is ideal for applications that require the measurement of both the direction and the
magnitude of Earth’s magnetic field, from milligauss to 8 gauss.

• Plug and play with OSEPP I²C Expansion Shield

• 12-Bit ADC with 2 milligauss field resolution in +/- 8 gauss field to enable 1-2 degree compass heading accuracy
• Fast 160 Hz maximum output rate
• Low power consumption
• Supports I²C interfacing with 7-bit address of 0x1E
• Provides pass-through connector to support daisy chaining of multiple sensors from the OSEPP Sensor Module family
• Provides 0.1” breakout points for power and I²C interface pins access

Product Info
Stock Code COMP-01
Description OSEPP Compass Sensor
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000107

27
Sensor Modules

Fan Motor Module

The fan motor controller board allows
speed and direction control of a
low power DC motor. 100% Arduino Product Info
Compatible.
Stock Code FAN-01
• Operating voltage output: 3V – 6V MAX Description Fan Motor Module
• Speed (no load):15000 rpm
• Speed (6V):8000 rpm Package Size 5” x 4” x 1”
• Current (6V):40mA UPC 667510001370
• Stall current (6V):360mA
• Torque (6V):0.111kg/cm

Flame Sensor Module

Use to detect variations in light wavelength (such as fire flame detection)
in the range of 760nm - 1100 nm.
Product Info
• 100% Arduino Compatible
• Operating voltage: 4.75V – 5V MAX Stock Code FLAME-01
• Working current: 20 mA Description Flame Sensor
• Spectral bandwidth range: 760 - 1100 nm. Module
• Detection range 0-1 m
Package Size 5” x 4” x 1”
• -25 ~ 85 degrees Celsius.
UPC 667510001226

Humidity & Temperature Sensor Module

Humidity and temperature sensor module that easily connects to Arduino
microcontrollers. Pre calibrated at factory for precision measurements.

• 100% Arduino Compatible

• 3 pin outs: GRD (-) VCC (+) S – Signal
Product Info
• 20 meter signal transmission Stock Code HUMI-01
• Power supply voltage: 5V Description OSEPP Humidity
• Temperature Range: 0-50°C & Temperature
• Temperature Accuracy: +/- 2°C Sensor Module
• Humidity Range: 20-90%RH
• Humidity Accuracy: +/_ 5%RH Package Size 5” x 7.5” x 1”
UPC 667510001097
 Sensor Modules

Joystick Module
The two axis joystick is equipped with independent potentiometers (one
per axis) for analog reference. The joystick module comes equipped with
headers to easily connect to a breadbord for rapid protoyping.

• 100% Arduino Compatible Product Info

• Operating voltage output :
Stock Code JOY-01
3.3V – 5V MAX
• Analog input Description Joystick Module
• Two 10K potentiometers with Package Size 5” x 4” x 1”
common ground per axis
UPC 667510001448

Line Follower Array

The Line Follower Array module is perfect for robotic navigation
applications. The module features five reflective optical sensors used to
accurately track black surfaces from
white.
Product Info
Stock Code LINE-02
• 100% Arduino Compatible Description Line Follower Array
• five reflective optical sensor
(TCRT5000) Package Size 5” x 7.5” x 1”
• 5v input logic UPC 667510001554
• five digital input pins for each optical
sensor
• Provides 0.1” breakout points for
power and I²C interface pins access

Accelerometer ADXL345 3-axis

MEMS w/13 bit resolution
The OSEPP ADXL345 is a 3-axis MEMS accelerometer with 13-bit resolution
measurement at up to +-16 g. Digital output data is formatted as 16-bit
twos complement and is accesible
through either an SPI (3 or 4-wire) Product Info
or i2c digital interface. Stock Code ACCEL-02

• 100% Arduino Compatible Description Accelerometer,

• 3 axis MEMS Accelerometer 13 bit ADXL345 3-axis MEMS
resolution w/ 13 bit resolution.
Package Size 5.25” x 8.5” x 0.5”
UPC 667510001424

29
Sensor Modules

Accelerometer & Gyro Breakout (Balancing Module)

The MPU6050 Balancing Module is a 6-axis motion tracking device that
combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion
Processor (DMP) which allows Motion Processing and gesture recognition
algorithms. Ideal for making your own 2-wheeler balancing robot.

• VDD supply voltage 3-16v MAX

• VLOGIC 3.3v to VDD
• I2C serial interface
• internal Digital Motion Processing engine supports 3D motion / gesture
recognition algorithms
• 3-axis gyroscope, 3-axis accelerometer in one package
• 16-bit ADC for simultaneous sampling of accelerometers and gyros
• 100% Arduino compatible

Product Info
Stock Code BAL-01
Description Accelerometer & Gyro Breakout (Balancing Module)
Package Size 5” x 4” x 1”
UPC 667510001547

IR Detector Module
Obstacle avoidance module. Detects
when objects are within the calibrated Product Info
range. Stock Code IRDET-01
• 100% Arduino Compatible
Description IR Detector
• 3 pin outs:
Module
G –Ground
V – 5V Package Size 5” x 7.5” x 1”
S – Signal UPC 667510001035

IR Follower Module
Consists of 6 IR diodes. This IR Follower
module can be used to sense infrared
Product Info
light as a way to guide your Arduino Stock Code IRFOL-01
project. Description IR Follower
Module
• 100% Arduino Compatible
• Can be used to build a light following Package Size 5” x 7.5” x 1”
robot UPC 667510001066
• 6 analog pins and power pins
 Sensor Modules

IR Line Sensor Module

The OSEPP IR Line Sensor Module differentiates the reflections between
dark and light surfaces. It utilizes the Fairchild QRE1113GR miniature
reflective object sensor and the NXP PCA9691 A/D converter. The 8-bit A/D
converter digitalizes the sensor output. The sensor operates by emitting
an IR signal via an LED, and then measuring the amount of reflection to
determine the blackness of the surface.
The module uses the I²C interface for data communication. The I²C lines
are packaged with the power and ground lines into a modular connector,
which allows easy plug and play operation. There are two connectors on
the module to enable daisy chaining of multiple I²C devices together.
This sensor module is ideal for designs that required to track black line on
a white surface (or vice versa), such as in a line-following robot, or used to
detect the outer perimeters of a competition ring.

Product Info
Stock Code LINE-01
Description OSEPP IR Line Sensor
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000145

IR Proximity Sensor Module

The OSEPP IR Proximity Sensor Module measures distances. It utilizes the Sharp GP2Y0D805Z0F measuring sensor unit
which is composed of an integrated combination of photo diode, infrared emitting diode and a signal processor.
The digital value from the proximity sensor is read out on the I²C bus.
The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines
into a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable
daisy chaining of multiple I²C devices together. This sensor module is ideal for designs that need to detect objects within
a certain range or designs that need to avoid obstacles. It can also be used as a touchless switch.

• Plug and play with OSEPP I²C Expansion Shield

• Detection range of 0.5 – 5.0 cm
• Supports I²C interfacing with 4 programmable 7-bit address (0x20, 0x22, 0x24,
0x26) to allow up to 4 OSEPP IR Proximity Sensor module to exist on the same
I²C bus
• Provides pass-through connector to support daisy chaining of multiple
sensors from the OSEPP Sensor Module family
• Provides 0.1” breakout points for power and I²C interface pins access

Product Info
Stock Code PROX-01
Description OSEPP IR Proximity Sensor
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000121

31
Sensor Modules

IR Receiver Module W/ REMOTE

Wirelessly control your Arduino project with the IR Remote and IR
Receiver Module.

• 100% Arduino Compatible

• 3 pin outs: Product Info
• G (GRD) Stock Code IRREC-02
• V (VCC)
• S ( Signal) Description IR Receiver
• 3-5 V operating range Module W/
• Operates at a frequency of 38khz REMOTE
Package Size 5” x 7.5” x 1”
UPC 667510001523

LED Modules

Product Info
Stock Description Package UPC
Code Size The LED module allows easy plug and
LEDBL-01 LED Module - BLUE 5” x 4” x 1” 667510001240 play configuration to your Arduino’s I/O
lines. The LED can be controlled through a
LEDGN-01 LED Module - GREEN 5” x 4” x 1” 667510001257 PWM signal or a digital high/low output.
LEDWH-01 LED Module - WHITE 5” x 4” x 1” 667510001288
• 100% Arduino Compatible
LEDYL-01 LED Module - YELLOW 5” x 4” x 1” 667510001295 • Operating voltage input : 5V (regulated)
LEDRD-01 LED Module - RED 5” x 4” x 1” 667510001271 • Digital/pulse width modulation output
• 25 mA operating voltage rating
LEDMX-01 LED Modules Mixed pack (one 5” x 4” x 1” 667510001264
each of red, yellow, blue,
white, and green)
 Sensor Modules

Light Sensor Module

Photoelectric sensor used to detect ambient light. Can be used to detect
light intensity in numerous home automation/industrial applications.
Easily connect breakout board to Arduino.
3 pin outs: GRD (-) VCC (+) S ( Signal)
• Suitable supply voltage: +3 to 5Vdc
• Analog voltage output: 0 to 5 Vdc
• Detects ambient light density
Product Info
• Works with CdsPhotoresistor Stock Code LIGHT-01
• Interface with microcontrollers and logic Description OSEPP Light
circuits Sensor Module
• Analog sensors
• Uses PH 2.0 socket Package Size 5” x 7.5” x 1”
• Special sensor with Arduino expansion UPC 667510001127
boards

LM35 Temperature Sensor Module

LM35 Temperature sensor uses the LM35 integrated circuit. Can be used in
numerous weather detection applications for home automation / weather
monitoring. Breakout board format allows for easy interfacing with
Arduino.
3 Pin Outs: GRD (-) VCC (+) S-Signal
Rated for Full – 55°C to + 150°C Range
Product Info
• Calibrated directly in ° Celsius
(Centigrade) Stock Code TEMP-01
• Linear + 10 mV/°C Scale Factor Description OSEPP LM35
• 0.5°C Ensure accuracy (at +25°C) Temperature
• Suitable for remote applications Sensor Module
• Low cost due to wafer-level trimming
Package Size 5” x 7.5” x 1”
• Operates from 4 to 30V
• Less than 60- UPC 667510001134

MQ-3 Alcohol Gas Sensor Module

The alcohol gas sensor can detect a range of different gases such as LPG,
i-butane, methane, alcohol, Hydrogen, smoke and more.

• 100% Arduino Compatible Product Info

• Operating voltage input : 4.9-5v
• Analog input Stock Code AGAS-01
• Heating consumption: 0.5-800mW Description MQ-3 Alcohol
• Operating Temperature: -25~70°C Gas Sensor
Module
Package Size 5” x 4” x 1”
UPC 667510001356
33
Sensor Modules

Passive Infrared Sensor (PIR) Module

The Passive Infrared sensor detects changes in motion within its
environment. 100% Arduino Compatible.

• Operating voltage 5V-12V

• Digital input sensor
• Detect variations in motion

Product Info
Stock Code PIR-01
Description Passive Infrared Sensor (PIR) Sensor Module
Package Size 5” x 4” x 1”
UPC 667510001394

Piezo Sensor Module

The Piezo sensor acts both as an output buzzer device and an input device
measuring sound pressure.

• Wide supply voltage range: 3.3V to 5V

• Digital output buzzer
• Analog input sound pressure sensor

Product Info
Stock Code PIEZO-01
Description Piezo Sensor Module
Package Size 5” x 4” x 1”
UPC 667510001301

Potentiometer Module
The potentiometer module is able to adjust and read variations in voltage.
• 100% Arduino Compatible
• 360 degree rotation angle (non continuous)
• Analog reading of voltage
• Operating voltage 3.3V-5V

Product Info
Stock Code POTEN-01
Description Potentiometer Module
Package Size 5” x 4” x 1”
UPC 667510001318
 Sensor Modules

Push Button Module

The push button module allows detection in states of high or low from the
onboard momentary push button.
• 100% Arduino Compatible
• Operating voltage output : 3.3V – 5V MAX
• Digital input
• Plug and play configuration

Product Info
Stock Code PUSH-04
Description Push Button Module
Package Size 5” x 4” x 1”
UPC 667510001325

Reed Switch Sensor Module

The Reed Switch module acts as a SPST (Single Pull Single Throw) switch.
The reed switch state is triggered high or low based on the proximity of a
magnet.
Product Info
• 100% Arduino Compatible Stock Code REED-01
• 10W rating
• Operating voltage Description Reed Switch
4.5V - 5.25V (5V typical) Module
• 500 mA rating Package Size 5” x 4” x 1”
• Digital input device
UPC 667510001332

Sound Sensor Module

The sound sensor is the perfect sensor to detect environmental variations
in noise.
Product Info
• 100% Arduino Compatible
• Wide supply voltage range: 3v-5V Stock Code SOUND-01
• 4mA current drain Description Sound Sensor
• Analog voltage measurement Module
through SIG pin
Package Size 5” x 4” x 1”
• Frequency range: 10 ~ 55 Hz
UPC 667510001387

35
Sensor Modules

Touch Sensor Module

Easy breakout to connect to Arduino. Detects body capacitive touch,
outputting analog voltage.

3 pin outs:
G (GRD) Product Info
V (VCC)
S ( Signal) Stock Code TOUCH-01
• 3-5 V operating range Description OSEPP Touch
• 5 mA minimum current requirement. Sensor Module
• Capacitive touch detection
Package Size 5” x 7.5” x 1”
UPC 667510001110

Voltage Sensor Module

The voltage sensor can detect the supply voltage
from 0.0245V to 25V.

• 100% Arduino Compatible

• Operating voltage output : 3.3V – 5V MAX
• Input voltage range 0.0245V ~ 25V MAX
• Analog input

Product Info
Stock Code VOLT-01
Description Voltage Sensor Module
Package Size 5” x 4” x 1”
UPC 667510001349

Ultrasonic Sensor Module

An ultrasonic transmitter and receiver sensor all in one.
• Operating Voltage: 5V
• Working Current: 15 mA
• Distance Range: 2cm to 400cm
• 100% Arduino Compatible

Product Info
Stock Code HC-SR04
Description Ultrasonic Sensor Module
Package Size 5” x 4” x 1”
UPC 667510001219
 Sensor Modules

Passive Infrared Sensor (PIR) Sensor

Module, added mounting holes on PCB
The Passive Infrared sensor detects
changes in motion within its Product Info
environment. 100% Arduino Compatible. Stock Code PIR-02

This newer versions comes with Description Passive Infrared

mounting holes on the PCB for ease of Sensor (PIR) Sensor
attachment to you projects. Module, added
mounting holes
• Operating voltage 5V-12V on PCB
• Digital input sensor Package Size 5” x 4” x 1”
• Detect variations in motion
UPC 667510002957

PING Ultrasonic
This is an improved version over conventional ultrasonic sensors. It offers
better quality, range, and sensivity making it ideal for robotic projects.

Ultrasonic sensors can be used for obsticale avoidance or to measure

distance. It is 100% Arduino Compatible. With improved specifications,
this makes it ideal for creating object avoidance robots with more precise
navigation.
• Operating voltage 5V
• Working current: 15mA
Product Info
• Range: 3cm to 4m Stock Code ULTRA-01
• 2.54mm breakout pins
Description PING Ultrasonic
• 16mm interval M4 mounting
holes, compatible with OSEPP and Package Size 5.25” x 8.5” x 0.5”
Makeblock beams UPC 667510002940

37
Accessories

ACCESSORIES
 Accessories

F/F Premium Jumpers – 6”

These 6” long jumpers have female connectors on both ends. The connectors fit
nicely with the headers on your Arduino and Arduino compatible board as well
as any standard 0.025” square pin header. Use with our 6” M/M Premium Jumpers
to create a male to female jumper. Multiple jumpers can be installed next to one
another on a 0.1” header.

• 2AWG, UL1007 Product Info

• 6” long v
• Mates with 0.025” Stock Code LS-FFPJ-06
(0.635mm) pin Description 6” F/F Premium Jumpers, 10 of each
• Red, Black, White, Grey and color (red, black, white, grey, blue)
Blue
Package Size 7” x 4”
• Temperate Range: 14F
(-10C) to 176F (80C) UPC 899262000398

M/F Premium Jumpers – 6”

• 2AWG,
• 6” long
• Mates with 0.025” (0.635mm) pin
• 0.1” header size (breadboard friendly)
• Red, Black, White, Grey, and Blue
• Temperature Range (UL 1007): -10C / 14F to 80C / 176F

Product Info
Stock Code LS-MFPJ-06
Description 6” M/F Premium Jumpers, 10 of each color
(red, black, white, grey, blue)
Package Size 7” x 4”
UPC 899262000084

M/M Premium Jumpers – 6”

These jumpers are a huge time saver. The 0.025” square pin size fits nice and
snug to the sockets on your Arduino and Arduino Compatible board as well as
any standard breadboards. The five different colors help you organize your
circuit wiring and minimize connection error. Multiple jumpers can be installed
next to one another on a 0.1” socket.
• 2AWG, UL1007 Product Info
• 6” long
• Mates with 0.025” Stock Code LS-MMPJ-06
(0.635mm) pin Description 6” M/M Premium Jumpers, 10 of each
• Red, Black, White, Grey color (red, black, white, grey, blue)
and Blue
Package Size 7” x 4”
• Temperate Range: 14F
(-10C) to 176F (80C) UPC 899262000596
39
Accessories ACCESSORIES
4-Pin I2C Connector 4-Pin I2C Connector
F/F – 8” M/F – 8”

• Length: 205mm +/- 5mm • Length: 205mm +/- 5mm

• Connector: 4-pin 2.54mm pitch • Connector: 4-pin 2.54mm pitch
• Wire: UL1007 -24AWG    • Wire: UL1007 -24AWG   
• Pin mapping: straight through • Pin mapping: straight through

Product Info Product Info

Stock Code FFI2C-01 Stock Code MFI2C-01
Description F/F 4-Pin I2C Connector - 4 pack Description M/F 4-Pin I2C Connector - 4 pack
Package Size 5” x 4” x 1” Package Size 5” x 4” x 1”
UPC 667510001165 UPC 667510001158

4-Pin I2C Connector Barrel Jack to 2-pin

M/M – 8” JST

•Length: 205mm +/- 5mm • Use to adapt from a wall power supply to SMD JST connector
•Connector: 4-pin 2.54mm pitch • Ideal for battery charging
•Wire: UL1571 -24AWG • 5.5 x 2.1mm barrel jack to 2-pin JST connector
•Pin mapping: straight through • 7.9 inch long jumper cable

Product Info Product Info

Stock Code LS-CAB4P-08 Stock Code LS-00012
Description 4-Pin/I2C Connector, 8” cable (4 pack) Description Barrel Jack to 2-pin JST
Package Size ~ 4” x 4” Package Size 7” x 4”
UPC 899262000183 UPC 899262000039
 ACCESSORIES Accessories

USB Barrel Jack 3 Pin

Adapter Jumper Cable

Allows user to pull 5 Volts of power from the USB port on Three wire cable that is great for jumping from board to
computer, laptop, or car cigarette power supply to power board or just about anything else. Perfect for 3 pin out
an Arduino or other development board sensors. There is a 3-pin JST RE connector on both ends.
• USB port to a 5.5 x 2.1mm center positive barrel jack Standard 0.1” pitch.
• 3’ long cable • Gauge 26 AWG • Length - 18cm
• 24 AWG Wire Cable • 3 pin wire - Black/Red/White

Product Info Product Info

Stock Code LS-00011 Stock Code 3PIN-01
Description USB Barrel Jack Adapter Description 3 Pin Jumper Cable - 10 pack
Package Size 7” x 4” Package Size 5" x 4" x 1"
UPC 899262000022 UPC 667510001141

Battery Holder DC Barrel Jack

Adapter – Female

• 4 cell AA battery holder

• Standard 5.5 x 2.1mm center positive barrel jack • Barrel jack to bare wires using screw terminal
• Approximate output of 5.5V from normal alkaline batteries. • 5.5 x 2.1 mm center-positive femal barrel jack
• Perfect for Arduino or Arduino Compatible boards • Ideal for connecting power supply with barrel jack to
• 7.0” cable breadboard

Product Info Product Info

Stock Code LS-00013 Stock Code LS-00015
Description Battery Holder Description DC Barrel Jack Adapter - Female (2 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000046 UPC 899262000060
41
Accessories ACCESSORIES
DC Barrel Jack Arduino Stackable
Adapter – Male Header – 6 pin

• Barrel jack to bare wires using screw terminal

• 5.5 x 2.1 mm center-positive male barrel jack • 6 Pin female header with extra long legs
• Ideal for connecting bare wires to an Arduino or a • Great for stacking Arduino or OSEPP Shields
development board • Pins are spaced by standard 0.1”

Product Info Product Info

Stock Code LS-00014 Stock Code LS-00007
Description DC Barrel Jack Adapter - Male (2 pack) Description Arduino Stackable Header - 6 pin (4 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000053 UPC 899262000541

Arduino Stackable Arduino Stackable

Header – 8 pin Header – 10 pin

• 8 Pin female header with extra long legs • 10 Pin female header with extra long legs
• Great for stacking Arduino or OSEPP Shields • Great for stacking Arduino or OSEPP Shields
• Pins are spaced by standard 0.1” • Pins are spaced by standard 0.1”

Product Info Product Info

Stock Code LS-00008 Stock Code LS-00009
Description Arduino Stackable Headers - 8 pin (4 pack) Description Arduino Stackable Header - 10 pin (4 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000565 UPC 899262000008
 Accessories

Arduino Stackable Break Away

Header Kit Headers – Long

• Made for Arduino Uno R3 or OSEPP Uno R3 Plus or other • Standard break away headers but longer
similar boards • 20mm length allows you to use them socket to socket
• Perfect height clearance for USB-B connector • 40 pins per row
• Includes 4 headers needed to stack a shield • Pins are spaced by standard 0.1”

Product Info Product Info

Stock Code LS-00010 Stock Code LS-00005
Description Arduino Stackable Header Kit (1 x 6pin, 2 x Description Break Away Headers - Long (4 pack)
8 pin, 1 x 10 pin)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000015 UPC 899262000527

• Pins are spaced by standard 0.1”

Break Away Female Headers

Headers – Straight

• Use with custom PCBs or general custom headers • Single row of 40-holes, female header
• Break or cut to fit • Can be cut to size with standard wire-cutters
• 40 pins per roll • Pins are spaced by standard 0.1”
• Pins are spaced by standard 0.1” • Compatible to Olimex development boards
• 11.5 mm pin length • Mates well with break away male headers

Product Info Product Info

Stock Code LS-00004 Stock Code LS-00006
Description Break Away Headers - Straight (10 pack) Description Female Headers (10 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000510 UPC 899262000534
43
Accessories

Breadboard Breadboard
830 Tie Points 400 Tie Points

• Dimensions: 2.2” x 6.5”

• Dimensions: 3.2” x 2.1”
• 1 Terminal Strip, 630 tie points
• 1 Terminal Strip, 300 tie points
• 2 Distribution Strips, 200 tie points
• 2 Distribution Strips, 100 tie points
• Colour coordinated for easy component placement
• Color coordinated for easy component placement
• Phosphor bronze-nickel plated spring clips
• Phosphor bronze nickel plated spring clips
• Accepts a variety of wire sizes (20-29 AWG)
• Accepts a variety of wire sizes (20-29 AWG)
Product Info Product Info
Stock Code LS-00019 Stock Code LS-00018
Description Breadboard - 830 Tie Points Description Breadboard - 400 Tie Points
Package Size 12.5” x 4” Package Size 7” x 4”
UPC 899262000459 UPC 899262000435

Mini Breadboard Mini Push

Self Adhering Button Switch

• Compatible with Arduino and all Osepp parts • 6mm Miniature Single Pole Single Throw switch
• Dimensions: 1.8” x 1.4” • 170 tie points • Method of input for various projects
• Phosphor bronze-nickel plated spring clips • Breadboard friendly
• Accepts a variety of wire sizes (20 – 29 AWG) • Great as a tactile reset switch

Product Info Product Info

Stock Code LS-00017 Stock Code LS-00003
Description Mini Breadboard - Self Adhering (2 pack) Description Mini Push Button Switch (25 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000428 UPC 899262000503
 Accessories

Momentary Push Tactile Button

Button Switch Assortment

• Standard 12mm square switch • Applicable for various projects

• Breadboard friendly • Multiple color selections
• Method of input for various projects • Removable caps
• Great for use as reset button • Momentary push buttons

Product Info Product Info

Stock Code LS-00002 Stock Code LS-00001
Description Momentary Push Button Switch - 12mm Description Tactile Button Assortment (12 pack)
Square (10 pack)
Package Size 7” x 4” Package Size 7” x 4”
UPC 899262000480 UPC 899262000473

16x2 LCD Display

The LCD display is a 16 character by 2 line (16x2) LCD display. The LCD contains
a white LED for backlight display. The viewing angle of 180 degrees (your 6
o’clock). Operating voltage is 5 volts.

• 100% Arduino compatible.

• Input Data: 4-Bits or 8-Bits interface available
• Display Font : 5 x 8 Dots
• Power Supply : Single Power Supply (5V±10%)
• 5 volt operating voltage
• Display Mode: STN, BLUB

Product Info
Stock Code LCD-01
Description 16 x 2 LCD Display Panel Module
Package Size 5” x 4” x 1”
UPC 667510001172

45
Accessories

LM35 Temperature Sensor Component

LM35 Temperature sensor uses the LM35
integrated circuit. Can be used in numerous
weather detection applications for home Product Info
automation / weather monitoring. Stock Code CTEMP-01
Description LM35
• Rated for Full – 55°C to + 150°C Range Temperature
• Calibrated directly in ° Celsius (Centigrade) Sensor
• Linear + 10 mV/°C Scale Factor Component

ACCESSORIES
• 0.5°C Ensure accuracy (at +25°C)
• Suitable for remote applications
• Low cost due to wafer-level trimming
Package Size
- 5 pack
5” x 4” x 1”
• Operates from 4 to 30V UPC 667510001202
• Less than 60-

Mini Photo Cell

The Light sensor is able to detect variations in
light conditions. The input readings of light Product Info
are directly proportional to the light sensors
output voltage. The light sensor is typically Stock Code PHOTO-01
used in environmental conditions where light Description Photo cell
illuminance (LUX) needs to be measured such component -
as phones, cameras, security systems, toys. 5 pack

• Operating Temperature -30~+70degree Package Size 5” x 4” x 1”

• Max voltage : 250V UPC 667510001189
• Resistance 5-10k oHM
• 10-600 LUX

Multi Colored LED Assortment Set

• 5mm round LEDs
• Five each of Red, Yellow, Green, Blue, and White
• Widely used in flashlights and general lighting applications
• Compatible with Infrared Reflow Solder and Wave Solder Process

Product Info
Stock Code LS-00016
Description Multi Colored LED Assortment Set (25 pack)
Package Size 7” x 4”
UPC 899262000077
 Accessories

2AA Battery Holder 2AA Battery

Holder - 2/pcs

Suitable for hobby, models, science and other projects. Suitable for hobby, models, science and other projects.

Product Info Product Info

Stock Code LS-00030 Stock Code LS-00031
Description 2AA Battery Holder Description 2AA Battery Holder - 2/pcs
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001745 UPC 667510001752

2C Battery Holder 9V Battery Clip

Suitable for hobby, models, science and other projects.

Suitable for hobby, models, science and other projects. • Wire Length: 120mm

Product Info Product Info

Stock Code LS-00032 Stock Code LS-00033
Description 2AA Battery Holder Description 9V Battery Clip
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001769 UPC 667510001776
47
Accessories

9V Barrel Jack Adaptor

The 9V to Barrel Jack Adaptor is an Arduino compatible power
adaptor. The 9v battery jack allows you to power your Arduino
with a 9V battery through the power supply input jack.

• Power anything with on-board

barrel jack Product Info
• 5.5 x 2.1 mm center-positive barrel Stock Code LS-00020
jack

ACCESSORIES
Description 9V to Barrel
• Great for Arduino, development
Jack Adapter
boards, evaluation boards, etc
Package Size 7” x 4”
UPC 667510001417

Solid Copper Wire Single Strand wire -

BV0.12 (16ft)
Suitable for hobby, models, science and other projects.

Product Info
Stock Code LS-00034
Description Solid Copper Wire Single Strand wire - BV0.12
(16ft)
Package Size 7” x 4” x 1”
UPC 667510001783

2-Conductor Wire Red/Black -

26AWG(16ft)
Suitable for hobby, models, science and other projects.
• Gauge: 26 awg

Product Info
Stock Code LS-00035
Description 2-Conductor Wire Red/Black - 26AWG(16ft)
Package Size 7” x 4” x 1”
UPC 667510001790
 Accessories

DC 12 0.5A Yellow On Off Mini Push Button

Suitable for hobby, models, science and other projects.

Product Info
Stock Code LS-00036
Description DC 12 0.5A Yellow On Off Mini Push Button
Package Size 7” x 4” x 1”
UPC 667510001806

DC 30V 1A Black On Off Mini Push Button

Suitable for hobby, models, science and other projects.

Product Info
Stock Code LS-00037
Description DC 30V 1A Black On Off Mini Push Button
Package Size 7” x 4” x 1”
UPC 667510001813

Terminal Block (10 pack)

Suitable for hobby, models, science and other
projects. Product Info
Stock Code LS-00042
• 10 Pack
Description Terminal
• Rated Voltage: 300V
Block (10
• Rated Current: 8 A
pack)
• Wire Range: 26-16AWG
• Trip Length: 5-6mm Package Size 7” x 4” x 1”

ACCESSORIES
• Pitch: 3.96mm
• Poles: 2P-24P
UPC 667510001905

49
Accessories

Aluminum Heat Sink for Raspberry Pi - Low Profile (2 pieces) - 1)

9mm x 9mm x 5mm 2) 14mm x 14mm x 7mm
• 2 Piece set: (9mm x 9mm x 5mm) and (14mm x 14mm x 7mm)
• Perfectly sized for Processor and Ethernet controller
• Pre-cut 3M thermal adhesive for peel-and-stick installation
• Low-profile design can be used with HATs in place
• Keeps Rasberry Pi Running 30°F cooler

Product Info
Stock Code RPIHS-01
Description Aluminum Heat Sink for Raspberry Pi - Low Profile (2 pieces) -
1) 9mm x 9mm x 5mm 2) 14mm x 14mm x 7mm
Package Size 7” x 4” x 1”
UPC 667510001875

Aluminum Heat Sink for Raspberry Pi - tall fin (2 pieces) -

1) 9mm x 9mm x 12mm 2) 15mm x 14.5mm x 13mm
• 2 piece set: (9mm x 9mm x 12mm) and (15mm x 14.5mm x 13mm)
• Perfectly sized for Processor and Ethernet controller
• Pre-cut 3M thermal adhesive for peel-and-stick installation
• High-profile design for maximum heat dissipation
• Keeps Rasberry Pi Running 30°F cooler
Product Info
Stock Code RPIHS-02
Description Aluminum Heat Sink for Raspberry Pi - Low Profile (2 pieces) -
1) 9mm x 9mm x 5mm 2) 14mm x 14mm x 7mm
Package Size 7” x 4” x 1”

ACCESSORIES
UPC 667510001882

Premium Copper Heat Sink for Raspberry Pi (3 pieces) -

1) 9mm x 9mm x 4mm 2) 14mm x 14mm x 4.5mm 3) 15mm x 15mm x 2mm
• 3 piece set: (9mm x 9mm x 4mm) and (14mm x 14mm x 4.5mm) and
(15mm x 15mm x2mm)
• Perfectly sized for Processor and Ethernet controller
• Pre-cut 3M thermal adhesive for peel-and-stick installation
• Low-profile design can be used with HATs in place
• Better heat dissipation than standard aluminum

Product Info
Stock Code RPIHS-03
Description Premium Copper Heat Sink for Raspberry Pi (3 pieces) - 1) 9mm x 9mm
x 4mm 2) 14mm x 14mm x 4.5mm 3) 15mm x 15mm x 2mm
Package Size 7” x 4” x 1”
UPC 667510001899
 Accessories

2.55” Press Fit Wheel (2 pack)

Suitable for hobby, models, science and other projects.

• Compatible to ServoCity # 595648 and OSEPP # LS-00160
• Easy snap-on install
• Rubber tires for great traction

Product Info
Stock Code LS-00161
Description SEPP - 2.55” Press Fit Wheel (2 pack) , Comparable to ServoCity #

ACCESSORIES
595648
Package Size 7” x 4” x 1”
UPC 667510002094

RGB (tri-color) 10mm LED (10 pack)

Suitable for hobby, models, science and other projects.
• Case Pack: 10
• Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V
• Forward Current: 20mA
• Intensity (R/G/B): 550 / 250 / 700 mcd
• Common Cathode

Product Info
Stock Code LS-00043
Description RGB (tri-color) 10mm LED (10 pack)
Package Size 7” x 4” x 1”
UPC 667510001929

10mm LED ( 2 x 6 colors )

Suitable for hobby, models, science and other projects.
• Case Pack: 12
• 587-591nm Yellow
• 1.8-2.2VDC Forward Voltage
• 20mA Forward Current
• 40 degree viewing angle
• 100-150 MCD output
Product Info
Stock Code LS-00044
Description 10mm LED ( 2 x 6 colors )

Package Size 7” x 4” x 1”
UPC 667510001936
51
Accessories

Vibration Motor Solder-able

(2 pack) Breadboard - Mini

Suitable for hobby, models, science and other projects. Suitable for hobby, models, science and other projects.
• Case Pack: 2 • Size: 1.8 x 1.4”
• Operating Voltage: 2.3V to 4.2V • 0.1” spaced
• Rated Speed: 12000 +/- 2000 rpm • Released under the Creative Commons Attribution
• Vibration Strength: [email protected] Share-Alike 3.0 License. Designed by: Bryon Jacquot,
• Mechanical Noise: Max50dB-A [email protected] Rev: V10
Product Info Product Info
Stock Code LS-00046 Stock Code LS-00047
Description Vibration Motor (2 pack) Description Solder-able Breadboard - Mini
Package Size 7” x 4” x 1” Package Size 7” x 4” x 1”
UPC 667510001943 UPC 667510001950

Solder-able Solder-able
Breadboard Breadboard - Large

Suitable for hobby, models, science and other projects.

Same as regular breadboard with the same connections
Suitable for hobby, models, science and other projects. to pins and power rails.
• Size: 2.2 x 3.4” • Size: 2.2 x 6.7”
• 0.1” spaced • 0.1” spaced
• Released under the Creative Commons Attribution • Released under the Creative Commons Attribution
Share-Alike 3.0 License. Designed by: Bryon Jacquot, Rev: Share-Alike 3.0 License. Designed by: Bryon Jacquot, Rev:
V10 V10
Product Info Product Info
Stock Code LS-00048 Stock Code LS-00049
Description Solder-able Breadboard Description Solder-able Breadboard - Large
Package Size 7” x 4” x 1” Package Size 12.5” x 4”
UPC 667510001967 UPC 667510001974
 Accessories

Snappable Protoboard
Suitable for hobby, models, science and other projects. Same as
regular breadboard but you get to choose your own size.
• 0.1” spaced

Product Info
Stock Code LS-00050
Description Snappable Protoboard
Package Size 7” x 4” x 1”
UPC 667510001981

Breadboard - Translucent Self-Adhere

(Clear)
Same as a regular breadboard except that it is clear.
• 400 tie in points
• 0.1” spaced
• Acceptable wire gauge of 29-20AWG
• Dimensions: 3.2 x 2.1”
Product Info
Stock Code LS-00051
Description Breadboard - Translucent Self-Adhere
(Clear)
Package Size 7” x 4” x 1”
UPC 667510001998

53
Main Controller Boards

MAIN CONTROLLER
BOARDS
(MICRO CONTROLLERS)
 Main Controller Boards

Mega 2560 R3 Plus

The OSEPP Mega 2560 R3 Plus is the bigger brother to the OSEPP
Uno board with more flash memory, more SRAM, more EEPROM,
and more pins. This board is perfect for projects that require a lot
of inputs/outputs or that require more complex programs that
cannot fit into the smaller memory of the ATmega328P.

• 8-bit AVR RISC-based microcontroller running at 16 MHz

• 8x more flash and 4x more SRAM and EEPROM than the Uno
• Connects to a computer via a standard USB cable
Product Info • Flexible power source (USB or DC power)
Stock Code MEG-03 • ICSP header for programming microcontroller
• Compatible with existing Arduino software libraries
Description OSEPP Mega 2560 R3 Plus • Compatible with the Ethernet and Motor Controller Shields
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000350

Osepp Uno R4 Plus

The OSEPP™ Uno R4 Plus board is the most popular Arduino board
out in the Arduino market! This board uses the 8-bit, AVR, RISC-
based ATmega328P microcontroller from Atmel.
New Features in R4:
• ATMEGA 16U2 Chipset
• Micro USB connector
• 4 additional 5v and GND power pins
• Additional analog pins A6 & A7
• removed the Molex connector
Product Info
Stock Code UNO-04 • 8-bit AVR RISC-based microcontroller running at 16 MHz
• Connects to a computer via a standard USB cable
Description OSEPP Uno R4 Plus • Flexible power source (USB or DC power)
Package Size 5" x 7.5" x 1" • ICSP header for programming microcontroller
• Compatible with existing Arduino software libraries
UPC 667510001431 • Compatible with all Arduino shields make for Arduino UNOs

Fio
The OSEPP™ Fio board has wireless in mind. This board may
connect to an XBee radio (sold separately) and has a connector
for a lithium polymer battery which can be charged over the USB
connection.

• 8-bit AVR RISC-based microcontroller running at 8 MHz

• On/off slide switch
• Charging circuit for lithium polymer battery
• Connector for interfacing with XBee modules
• Flexible power source (USB or lithium polymer battery)
Product Info • Compatible with existing Arduino software libraries
Stock Code FIO-01
Description OSEPP Fio
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000220
55
Main Controller Boards

Pro
The OSEPP Pro board is tailored to more professional users who
do not mind a build-it-yourself approach compared to the OSEPP
Uno. Unlike the Uno model this barebones board lacks headers,
which gives this board a low profile. Pro users can choose to
connect only the needed pins by mounting headers or soldering
wires directly.

• 8-bit AVR RISC-based microcontroller running at 16 MHz

• About 2/3 the size of the OSEPP Uno board
Product Info • Flexible power source (lithium polymer battery or DC power)
Stock Code PRO-01 • ICSP header for programming microcontroller
• Compatible with existing Arduino software libraries
Description Pro • Compatible with the Ethernet and Motor Controller Shields
Package Size 1 Pack
UPC 5.25” x 8.5” x 0.5”

Pro Mini
The OSEPP Pro Mini board is a miniaturized version of the OSEPP
Pro, which in turn is a stripped down version of the OSEPP
Uno. Basically, this is as small as it gets which allows for easy
concealment in projects.

• 8-bit AVR RISC-based microcontroller running at 16 MHz

• Extremely small profile – less than 1/5 the size of the OSEPP Pro
board
• Compatible with existing Arduino software libraries
Product Info
Stock Code PRM-01
Description Pro Mini
Package Size 5.25" x 8.5" x 0.5"
UPC 899262000558

Bluetooth
The OSEPP™ Bluetooth board introduces Bluetooth connectivity
to its users with the Bluegiga WT11, class 1, Bluetooth 2.1 + EDR
module. With more than 10 supported Bluetooth profiles, this
board can be used for a multitude of BT-related projects.

• 8-bit AVR RISC-based microcontroller running at 16 MHz

• Bluegiga WT11 class 1 Bluetooth 2.1 + EDR module
• Input voltage can be as low as 1.2V
Product Info • Connects to a computer via Bluetooth serial COM
• ICSP header for programming microcontroller
Stock Code BTH-01 • Compatible with existing Arduino software libraries
Description Pro • Compatible with the Ethernet and Motor Controller Shields
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000114
 Main Controller Boards

Nano
The OSEPP Nano is a breadboard-friendly, downsized version of
the Uno board with much of the same functionality. The main
workhorse is still the ATmega328P; however, the number of
analog pins has gone up from four to eight. The other difference
is the lack of a DC power connector.

• 8-bit AVR RISC-based microcontroller running at 16 MHz

• Single mini-USB connector for both power and serial
communication
Product Info • Form factor is breadboard friendly
Stock Code NAN-01 • Less than 1/3 the size of the OSEPP Uno
• Two extra analog input pins compared to the OSEPP Uno
Description OSEPP Nano • Compatible with existing Arduino software libraries
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000442

UNO MAX Microcontroller (ARDUINO COMPATIBLE)

This is the ultimate UNO for Arduino enthusiasts. We’ve
applied every lesson learned from existing modesla and
created the UNO Max. The USB to serial is now done with
the ubiquitouss CH340G requiring fewer driver installs.
It now has built-in sensor pins, motor driver headers,
bluetooth headers and Wi-Fi 8266 headers making it even
easier to build projects.

Product Info • ATmega328P microcontroller with Optiboot (UNO) Bootlooder

Stock Code UNO-05 • CH340G USB to Serial IC
• Flat bottom, all SMD construction
Description OSEPP - UNO MAX Microcontroller • Built in Sensor Pin
(Arduino Compatible) • Built in Motor Driver Headers
Package Size 7” x 4” x 1” • Built in Bluetooth Headers
• Built in Wifi 8266 Headers
UPC 667510002476

57
Shield Boards

SHIELD BOARDS
 Shield Boards

16x2 LCD Display & Keypad Shield

The OSEPP 16 x 2 LCD Display and Keypad shield can plug directly onto the Arduino and Arduino compatible boards. The
LCD panel displays characters in white with a blue backlit and can display up to two lines of 16 characters. The shield
includes 6 momentary push button that can be used to implement a 5 buttons keypad including up, down, left, right and
select function. The sixth push button brings out the Arduino’s reset button to the top of the shield. The OSEPP 16 x 2 LCD
Display and Keypad shield interfaces with the Arduino board using digital pin 4 to10 and analog pin 0. The contrast can
be adjusted via a trim pot and the backlit can be turn on and off. The
shield is 5V compatible.

• Mate with Arduino and Arduino compatible boards

• Display up to 16 characters by 2 line
• Integrated the SPLC780D 16 COMs x 40 SEGs dot-matrix LCD controller and driver
• 5V operating voltage
• 5 button keypad – up, down, left, right, and select
• Brings out the Arduino’s reset button to the top of the shield

Product Info
Stock Code 16X2SHD-01
Description 16 x 2 LCD Display and Keypad Shield
Package Size 5” x 7”
UPC 899262000466

I2C Expansion Shield

The OSEPP I²C Expansion Shield is an Arduino-Compatible daughter (extension) card. It provides easy interconnection with
other I²C devices, such as the OSEPP Sensor Modules family. As well, it integrates an I²C switch that provides 4 additional
isolated I²C buses to enable the use without collisions of multiple I²C devices with same I²C addresses. The main I²C bus
and each of the 4 additional I²C bus are brought out to a robust latchable 4-pin connector that allow easy plug and play
functionality.

• 1-to-4 I²C switch to provide four isolated I²C buses

• Stackable with other Arduino and Arduino Compatible shields
• Provides pass through of all I/O as well as reset button and ICSP connector.
• Three selectable address bits for I²C switch to allow stacking of up to eight
Shields
• Supports boards with the Arduino Shield interface, such as (but not
limited to): Duemilanove • Uno • Pro • Bluetooth • Mega/Mega 2560
• Works with 3.3 V and 5 V boards
• Plug and play I²C connectors that provide I²C, power, and ground signals
• Easily connect OSEPP i2c sensor line

Product Info
Stock Code I2CSHD-01
Description OSEPP I2C Expansion Shield
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000169

59
Shield Boards

microSD Shield
Bring mass storage to your Arduino projects with this convenient microSD shield.

• 5v+3v3 or 3v3 operation

• 13×12 0.1” pitch prototyping area
• Compatible with popular libraries
• Interfaces over SPI with CS on pin 8

The SD card interfaces over SPI (SCK on D13, MISO on D12, MOSI on D11, and
CS on D8). Since SD cards run at 3v3 we’ve included a level shifter so
you can use the 5v logic found on popular Arduino boards.

Product Info
Stock Code MSDS-01
Description OSEPP microSD Shield
Package Size 5” x 7.5” x 1”
UPC 667510001080

Motor and Servo Shield

The OSEPP Motor and Servo Shield can plug directly onto the Arduino and Arduino compatible boards. It supports up to
2 servo motors and 4 bi-directional DC motors, or 2 servo motor and 2 stepper motors. Servo header and terminal blocks
are provided for easy connection to motor. The servo power supply and motor power supply can be configured to source
from an individual terminal block or from the Arduino board providing flexibility to your project.

• Mate with Arduino and Arduino compatible boards

• Provides connectors to support 2 servos.
• Servo power supply can be configured to source from the servo power terminal block or from the Arduino’s 5V pin.
• Support up to 4 bi-directional DC motors with individual 8-bit speed selection, and up to 2 stepper motors (unipolar
or bipolar) with single coil, double coil or interleaved stepping.
• Motor power supply can be configured to source from the motor power terminal block or from the Arduino’s VIN pin.
Support motors operating between 4.5V to 25V DC.
• Includes two L293D Quad H-Bridges chipset that can provide 0.6A per bridge (1.2A peak) with thermal shutdown
protection, internal kickback protection diodes.
• Provides DIP sockets to support other pin compatible motor bridge chipset.
• Integrated pull down resistor to keep motor disable during start up.
• Individual LED indicator for motor power supply state and servo power supply state.
• Brings out the Arduino’s reset button to the top of the shield

Product Info
Stock Code SCSHD-01
Description Motor and Servo Shield
Package Size 5” x 7”
UPC 899262000091
 Shield Boards

microSD Shield
Proto Shield
This Prototyping shield brings a small prototyping area to your Arduino for you to build your projects on. It includes two
general purpose LEDs with resistors ready to use, just connect the anode pin to your Arduino. Also includes a user push-
button with a pull-up resistor and brings the Arduino reset button to the shield. The Arduino headers are duplicated to
solder pins on the board so you can stack with other shields without losing access to your headers. Fits a 47mm x 36.5mm
mini breadboard.

• 13×16 0.1” pitch prototyping area

• Two LEDs with the anode pin
Product Info
exposed (JC2, JC3) Stock Code PROTO-01
• Arduino Reset button • A User push-
Description OSEPP Proto Shield
button with Pull-up (JC1)
• BlueSMiRF header Package Size 5” x 7.5” x 1”
UPC 667510001073

Sensor microSD
Shield Shield
Easily connect Servo motors, Sensors, and Bluetooth/RF modules to your Arduino or Arduino Compatible board. This Sensor
Shield provides breakout connectors for standard Servo Motors and various 3-pin Sensors. A 5v DC screw terminal enables
you to drive power hungry servo motors with an additional 5v DC power supply. Standard Arduino Shield form factor fits
perfectly on top of the Arduino UNO and Mega. Pin Outs: For detailed Pin Outs, visit OSEPP.COM to download schematic.

• 100% Arduino Compatible Product Info

• Servo Breakout Connectors (6 with
PWM) Stock Code SENSHD-01
• Sensor Breakout Connectors (5 Description OSEPP Sensor Shield
Analog, up to 14 Digital)
• 6-pin Bluetooth Module Connector Package Size 5” x 7.5” x 1”
• 6-pin APC220 RF Module Connector UPC 667510001042

microSD
Motor Shield - 6612Shield
This 6612 motor shield is the most powerful motor shield we have created. This
shield features the TB6612 IC chip for driving DC motors. it can drive up to 4 DC
motors with a maximum rating of 12 volt at 5 amps.

• 1100% Arduino Compatible Product Info

1.2 - 3.2 Amp peak Stock Code TBSHD-01
DC to DC TBS54331 Power chip
Description Motor Shield - 6612
control any of our Mechanical Kits
Package Size 5” x 7.5” x 1”
UPC 667510001578

61
Breakout & Driver Boards

BREAKOUT
&
DRIVER BOARDS
 Breakout & Driver Boards

microSD
FTDI Breakout Shield
Board
The OSEPP FTDI is a USB-to-serial (TTL) converter for serial communication with devices like the OSEPP Pro and Pro Mini
boards. The board uses the popular FT232RL chip from FTDI.
The pinout is designed to work with Arduino and compatible boards that do not have a built-in USB-to-serial converter,
such as the Pro and Pro Mini. The pin VCC can be easily configured to be 3.3 or 5 V by placement of a jumper. This allows
the board to be used with boards that operate on either 3.3 or 5 V nominal voltage. The FTDI board is designed for flexible
connections to other boards. For example, its female header connects
easily to the male pin header of the OSEPP Pro. Furthermore, connecting the
provided male pin headers to the female pin header allows connections
to pinout of the Pro Mini. The male pin headers can also be soldered to the
FTDI board to make it breadboard mountable. Drivers for the Virtual COM
Port (VCP) is available for virtually all mainstream operating systems.

• Pinout compatible with Arduino Product Info

boards such as OSEPP brand
Stock Code FTD-01
• Form factor is breadboard friendly
• Selectable common-collector Description FTDI Breakout Board
voltage
Package Size 5.25” x 8.5” x 0.5”
UPC 899262000176

Motor Driver Module

Motor driver can drive a 4-wire stepper motors, or two DC motors
simultaneously for your Arduino project. Ability to control motor direction
and speed when used with an Arduino.

• 100% Arduino Compatible

• L298 dual h bridge driver
• Reverse motor polarity (motor direction)

Product Info
Stock Code MTD-01
Description Motor Driver Module
Package Size 5” x 7.5” x 1”
UPC 667510001059

Stepper Motor & Driver

The ULN2003A stepper motor board is used to control 4 phase bipolar
stepper motors such as the 28BYJ-48 stepper motor.

• 100% Arduino Compatible

• See back panel for detailed specifications

Product Info
Stock Code STEPD-01
Description Stepper Motor & Driver
Package Size 5” x 4” x 1”
UPC 667510001196
63
Breakout & Driver Boards

Real-time Clock & microSD Breakout

The Real-time clock & microSD breakout keeps accurate time and supports external memory through a microSD. The
breakout features the DS1307 Real-time clock with battery holder for reliable time readings in case of breakout power
outage. The RTC/SD Breakout also features a microSD card slot, adding external memory to read/write pictures, text files,
audio and much more. Add accurate time measurement and external memory to your next Arduino project!

• 100% Arduino Compatible

• Operating voltage: 3.3V – 5V MAX
• counts seconds, minutes, hours, date of the month, month, day of the week,
and year with leap year compensation valid up to 2100
• microSD card support
• 5v to 3.3v regulator for SD card Product Info
operation. Stock Code RTCSD-01
• microSD SPI interface
• DS1307 RTC I²C interface Description SD and RTC Breakout
• CR1220 battery required (not Package Size 5” x 4” x 1”
included)
UPC 667510001462

microSD Breakout
Moisture & Humidity
Shield
The Moisture & Humidity breakout measures soil moisture, temperature and
humidity. The breakout features the DHT11 humidity sensor for accurate readings of
ambient temperature and moisture. The Moisture/Humidity breakout also features
two probes used for measuring the moisture levels in soil. Add smarts to your next
botanical Arduino project!

• 100% Arduino Compatible Product Info

• Operating voltage: 3V – 5V MAX Stock Code MHUM-01
• analog pin interface for moisture sensor
• DHT11 humidity sensor Description Humidity & Moisture
• 20-80% humidity readings with 5% Breakout
accuracy
Package Size 5” x 4” x 1”
• 0-50°C temperature readings ±2°C
accuracy UPC 667510001455

microSD Shield
TB6612 Motor Driver (Arduino Compatible)
TB6612 can drive two DC motors with power supply of 6V-12V and has the PWM speed
regulation function.

• B6612PNG motor driver IC

• Operating Voltage: 6V – 12V
• Constant current: 1.2A / 3.2A (peak)
• DHT11 humidity sensor Product Info
• Direct plug-in to OSEPP Uno Max (no cables Stock Code TBMTD-01
required)
• Over-current protection Description OSEPP - TB6612 Motor
• Control mode: 2 I/O (direction and PWM Driver (Arduino
speed regulation) Compatible)
Package Size 7” x 4” x 1”
UPC 667510002735
 Breakout and Driver Boards

Servo Power Board (unassembeld with

pins and male servo leads),
The Servo Power Board allows you to cleanly isolate current and voltage from your
receiver to protect the tiny traces within from burning out.
• Compatible to ServoCity # SC71350
• 8 Channels
• Wire Gauge of 22 AWG
• 3A per channel continuous / up to 9A total

Product Info
Stock Code LS-00077
Description Servo Power Board (unassembeld with pins and male servo leads),
Comparable to Servocity # SC71350
Package Size 7” x 4” x 1”
UPC 667510002056

microSD
Servo Power BoardShield
(unassembled with full pins),
The Servo Power Board allows you to cleanly isolate current and voltage from your
receiver to protect the tiny traces within from burning out.
• Compatible to Servocity # 575112
• Compatible to nearly all Actorobotic and OSEPP parts
• Standard servo size compatible
• Extra strength and light weight premium aluminum

Product Info
Stock Code LS-00078
Description Servo Power Board (unassembled with full pins), Comparable to
Servocity # SC71352
Package Size 7” x 4” x 1”

Servo Power Board (assembled with pins

microSD Shield
and male servo leads)
The Servo Power Board allows you to cleanly isolate current and voltage from your
receiver to protect the tiny traces within from burning out.
• Compatible to ServoCity # SC71351
• 8 Channels
Product Info
• Wire Gauge of 22 AWG Stock Code LS-00079
• 6” wire length
• 3A per channel continuous / up to Description OSEPP - Servo Power Board
9A total (assembled with pins
and male servo leads) ,
Comparable to Servocity #
SC71351
Package Size 7” x 4” x 1”
UPC 667510002070
65
Solar Cells

Solar Cells
Maximum efficiency Monocrystalline solar cells. Encapsulated
with low reflecting water clear epoxy to protect against physical
impact and harsh outdoor environments.

Stock Code Description Package Size UPC

SC10036 Monocrystalline Solar Cell, 100mA, 3.6V 2.4 X 2.4 X 0.2” 899262000268
SC10050 Monocrystalline Solar Cell, 100mA, 5.0V 3.0 X 2.4 X 0.2” 899262000275
SC10072 Monocrystalline Solar Cell, 100mA, 7.2V 3.5 X 2.8 X 0.2” 899262000282
SC20036 Monocrystalline Solar Cell, 200mA, 3.6V 3.3 X 3.3 X 0.2” 899262000299
SC20050 Monocrystalline Solar Cell, 200mA, 5.0V 4.7 X 2.8 X 0.2” 899262000312
SC20072 Monocrystalline Solar Cell, 200mA, 7.2V 5.5 X 3.5 X 0.2” 899262000329

Helpful Tips
Calculating Watts Power [Watt] = Voltage [Volt] x Current [Ampere]

Wiring Multiple Solar Panels

If your application needs a higher voltage supply source, you can wire
multiple solar panels in series. You can wire the positive terminal of
solar panel #1 to the load, and connecting the negative terminal of solar
panel #1 to the positive terminal of solar panel #2. In this wiring, the total
voltage delivered to the load will be doubled and the rated current supply
will remain the same.

If your application needs more power, you can wire multiple solar panels
in parallel. By connecting the positive terminal of solar panel #1 to the
postive terminal of solar panel #2, and connecting the negative terminal
of solar panel #1 to the negative terminal of solar panel #2, the maximum
current that can be delivered to the load will be doubled. The rated
voltage will remain the same.
Head Office 1053-2560 Shell Road
Richmond, BC V6X 0B8
Canada

Tel: (604) 219-9729

Web: www.osepp.com

Support Web: www.osepp.com/forum

Email: [email protected]

Become a Distributor Web: www.osepp.com/where-to-buy/become-a-distributor

Email: [email protected]

Accounting Email: [email protected]

Sales Contact Danny Bertner

Tel: (786) 253-4040
Email: [email protected]