Scribd
Upload
14 views

10

Uploaded by

R K Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

10

Uploaded by

R K Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

NAME OF WORK -EXTERNAL DEVELOPMENT AREA (RETAINING WALL BOQ)

RETAININ
G WALL
Item No. Description Unit Qty. Rate Amount
EXC001 Earth work in all soils excepted rocks over areas exc. 1.5m in
width as well as 10M² on plan i/c disposal of excavated earth,
lead upto 50m from the centre of excavation and lift upto 1.5m,
disposed earth to be levelled, neatly dressed, bailing & pumping
out with water reqd/directed and backfilling the trenches along
side massonary and concrete with approved excavated material
up to the natural ground level in layer not exc. 20cm in depth i/c
watering & ramming.

(a) Rate for upto 1.5 m CUM 1110 175 194250


(b) Extra Rate for more than 1.5 m CUM 1110 250 277500
EXC002 Filling with available excavated earth(excluding rock) under floor
in layers not exc. 20cm in depth, consolidating each deposited CUM 0 100
layer by ramming and watering lead up to 50m. 0
EXC003 Earth filling with earth brougth from outside in layer not exc.
20cm. In depth consolidating each deposited layer by power
compactor/ road roller & water complete. (Note: Only CUM 0 525
Compacted thickness will be measured.) 0
SUB HEAD TOTAL 471750
PCC : PLAIN CEMENT CONCRETE
Item No. Description Unit Qty. Rate Amount
PCC001 P/L PCC 1 : 3 : 6 (1 cement : 3 Fine agreegate :6 coarse
aggregate of 25mm down guage graded size) in foundations
footings, bases of column, under floor and plinth protection e/x CUM R/O 6000
cost of form work.
PCC002 P/L PCC 1 : 4: 8 (1 cement : 4 Fine agreegate :8 coarse
aggregate of 40mm down guage graded size) in foundations
footings,bases of column, under floor and plinth protection e/x CUM 56 5800
cost of form work. 324800
PCC003 P/L DPC 50mm thick with PCC 1:2:4 (1Cement : 2fine
aggregate : 4 coarse aggregate of 12.5mm nominal size) e/x SQM R/O 500
cost of form work.
SUB HEAD TOTAL 324800
RCS : STEEL REINFORCEMENT WORK
Item No. Description Unit Qty. Rate Amount
RCS001 Providing & fixing tested deformed steel bars as reinforcement
for RCC work i/c cutting, removal of loose rust, straightening,
bending, binding & placing in position i/c cost of MS annealed MT 20 77875
steel binding wire 0.9 to 1.6mm thick at all levels and height as
per design and drawing. 1557500
RCS002 Lap welding for high strenght deformed reinforcement steel bars
8 to 20mm dia of any length complete in all respects. (actual RM R/O 450
length of the weld to be measured)
SUB HEAD TOTAL 1557500
RCC : REINFORCEMENT CEMENT CONCRETE
Item No. Description Unit Qty. Rate Amount
Providing laying in position specified grade of reinforcement
cement conc. Including curing, excluding the cost of centring ,
shuttering and reinforcement.
RCC001 RCC M25 in raft, foundations, footings, base of column & mass
CUM 450 7500
concerete. 3375000
RCC002 RCC M25 in suspended floors, roofs, landing, balconies and the
like.
RCC003 RCC M25 in lintels, beams, bressumers, cantileveres & griders.

RCC004 RCC M25 in column pillers, piers, pedestals, capitals, mullions,


abutment, post and struts.
RCC005 RCC M25 in staircase (except spirl stair case) i/c landings. CUM R/O 7500
RCC006 RCC M30 in all items RCC001 to RCC004. CUM R/O 8000
RCC007 RCC M30 as per item RCC005. CUM R/O 8000
RCC008 Laying of ready mix concreate of all grades (supply by owner at
CUM R/O 3000
site).
SUB HEAD TOTAL 3375000
FW: FORM WORK

Item No. Description Unit Qty. Rate


Form work shall include centering , shuttering, shutting,steel
proppings (propping upto3.60m ht.) tying etc. complete in all
respects and subsequent removal of form work:
FW001 Raft, foundations, footings,RCC Walls,bases of column, etc. and
mass concerete with steel or ply. SQM 2480 680
1686400
FW002 Flat surface such as suspended floors, roofs lendings balconies
and the like having thickness upto 300mm with steel or ply. SQM

FW003 Sides or soffits or beams, beam hainchings, lintels, cantilevers,


SQM
griders, bressumers with ply.
FW004 Columns, pillers, piers, capitals, pedestals, mullions, abutments,
post and struts - square, rectangular, circular or polygonal in SQM
plan with ply.
FW005 Staircase except spiral with sloping or stepped soffits i/c landing
SQM
with steel or ply.
FW006 Extra for every 1.0m height or part thereof for extra propping,
centering and shuttering beyond 3.60m upto a height of 10m if SQM R/O 200
required.
SUB HEAD TOTAL 1,686,400
PW : PLASTERING & POINTING WORK
Item No. Description Unit Qty. Rate Amount
PW001 Providing and applying 18mm cement plaster (Outer) in two
coats under layer of 12mm thick cement plaster of mix 1:5
(1cement : 5coarse sand), finished complete with top layer of SQM R/O 400
6mm thick cement plaster of mix 1:3 (1cement : 3 coarse sand)

PW002 P/L 20-25 mm thk. cement plaster (Outer) in two coats under
layer of 12mm thick cement plaster of mix 1:5 (1cement :
5coarse sand), finished complete with top layer of 6mm thick SQM 10 500
cement plaster of mix 1:3 (1cement : 3 coarse sand)
5000
PW003 P/F GI chicken wire mesh 28 gauge 200mm wide at corners &
SQM R/O 100
junctions of two different materials.
PW004 P/L neat cement punning wherever required. SQM R/O 80
PW005 P/F drip course work lof Min.(1:1) one cement, one sand in
RM R/O 40
chajjas & canti lever areas.
PW006 Extra for groove in plaster work on external side for Elevation as
RM R/O 50
per the drg. & specifications.
SUB HEAD TOTAL 5,000
NOTE: The contractor will cut all the extra steel used for shuttering &
repair the wall properly.

You might also like