Scribd
Upload
26 views3 pages

Chapter - SOUND

Ch sound notes

Uploaded by

37simranmpps8b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views3 pages

Chapter - SOUND

Ch sound notes

Uploaded by

37simranmpps8b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Science Class 9 Notes - Sound

1. Sound : Sound is a form of energy which produces a sensation of hearing in our ears.
2. Source of sound and its propagation : A source of vibration motion of an object is
normally a source of sound.
3. Characteristics of the medium required for the propagation of sound:
(i) Medium must be elastic so that the medium particles have the tendency to return back to
their original positions after the displacement.
(ii) Medium must have the inertia so that its particles have the capacity to store the energy.
The frictional resistance of the medium should be negligible to minimise the loss of energy in
propagation.

4. Types of waves
i) Mechanical waves : A mechanical wave is a periodic disturbance which requires a material
medium for its propagation. On the basis of motion of particles the mechanical waves are
classified into two parts.

(a) Transverse wave


(b) Longitudinal wave
(a) Transverse wave : When the particles of the medium vibrate in a direction perpendicular
to the direction of propagation of the wave, the wave is known as the transverse wave. For
example, waves produced in a stretched string.
(b) Longitudinal wave : When the particles of the medium vibrate along the direction of
propagation of the wave then the wave is known as the longitudinal wave. For example sound
wave in air.

(ii) Electromagnetic waves : The waves which do not require medium for propagation are
called electromagnetic waves these waves can travel through vacuum also. For example, light
waves, X-rays.
5. Characteristics of a sound wave

Frequency : The number of vibrations per second is called frequency.


The unit of frequency is hertz
(i) Amplitude: The maximum displacement of each particle from its mean position is called
The S.I. unit of amplitude is nmetre (m).
(ii) Time period: The time taken to complete one vibration is called time period.

Frequency= 1/(Time period) or v= 1/T


(iv) Wavelength: The distance between two nearest (adjacent) crests or troughs of a wave is
called its wavelength.

() Velocity of wave: The distance travelled by a wave in one second is called velocity of the
wave (or speed of the wave). The S.I. unit for the velocity of a wave is metres per second (m/s
or ms-1).

(vi) Pitch: Pitch is the sensation (brain interpretation) of the frequency of an emitted sound
and is the characteristic which distinguishes a shrill (or sharp) sound from a grave (or flat)
sound.

(vii) Loudness : It is a measure of the sound energy reaching the ear per second.
6. Reflection of sound : When sound waves strike a surface, they return back into the same
medium. This phenomenon is called reflection.
7. Laws of reflection: Angle of incidence is equal the angle of reflection.
The incident wave, the reflected wave and the normal all lie in the same plane.

8. Echo: Phenomenon of hearing back our own sound is called an echo. It is due to successive
reflection from the surfaces obstacles of large size.

9. Relation between speed of sound, timne of hearing echo and distance of reflection body
:Ift is the time at which an echo is heard, d is the distance between the source of sound and the
reflecting body andv is the speed of sound. The total distance travelled by the sound is 2d.
speed of sound, v = 2d/t or d = vt/2
10. Conditions for the formation of Echoes
(i) The minimum distance between the source of sound and the reflecting body should be 17.2
metres.

(ii) The wavelength of sound should be less than the height of the reflecting body.
(ii) The intensity of sound should be sufficient so that it can be heard after reflection.
11. Reverberation: Persistence of sound after its production is stopped, is called
reverberation. A short reverberation is desirable in a concert hall (where music is being played)
because it gives life' to sound. Too much reverberation confuses the programmers and must be
reduced to reduce reverberation.

12. Range of Hearing : The audible range of sound for human beings extends from about 20
Hz to 20,000 Hz (one Hz = one cycle/s). Sounds of frequencies below 20 Hz are called
infrasonic sound or infrasound. Frequencies higher than 20 kHz are called ultrasonic sound or
ultra sound. Ultrasound is produced by dolphins.
13. Applications of ultrasound:The ultrasound is commonly used for medical diagnosis
and therapy, and also as a surgical tool. It is also used in a wide variety of industrial
applications and processes. Some creatures use ultrasound for information exchange and for the
detection and location of objects. Also some bats and
porpoises are found to use ultrasound for navi gation and to locate food in darkness or at
a place where there is inadequate light for vision (method of search is called echolocation).
14. Sonar :SONAR means Sound Navigation Rang-ing. In this sound waves (ultrasonic) are
used [microwaves are absorbed by water)]. Sound waves are emitted by a source. These waves
travel in water with velocity v. The waves re-flected by targets (like submarine bottom sea) are
detected.

Uses

(i) The SONAR system is used for detecting the presence of unseen underwater objects, such as
a submerged submarine, a sunken ship, sea rock or a hidden iceberg, and locating them
accurately.
(ii) The principle of SONAR is also used in industry of detection of flaws in metal blocks or
sheets without damaging them.

You might also like